Hey there DIYers, I was wondering if anyone here has had any experience with float houses? As in building a houseboat or a float house.
I´ve come across this site, http://www.westbayfloathomes.ca/float_home_designs.htm.
I have a lot of property which is ideal for a cabin, but due to socialist laws and red tape I am not allowed to put up a cabin on this piece of land. From my research it does seem like I am able and allowed to live on the water on this property.
Just looking to build a basic cabin that floats basically. There is no possibility to get power up there anyway, so I might buy a generator and some solar panels and batteries to charge my phone and gps, maybe have some lights.
What would be the ideal materials to keep this thing afloat? Im thinking of just making a floating "dock" with timber and buoyancy kept by plastic barrels.
more pictures
interior view
last pic I got
Back in days I was a stupid kid and gave my my little pony figure a makeover.
Any ideas how to get rid of markes without damaging the toy itself? I believe it might be permanent marker. Doesn't go off with water anyway.
Soak it in acetone (nail polish remover) for an hour or so.
>>1030715
No, just use a little tiny bit of acetone on a rag and wipe away the marker.
>>1030717
Soaking works way better. I had to do this with a toy the other day, soaked it for an hour or two and the mark came straight off with a bit of paper towel.
What is this?
>>1030595
Probably connections for surround sound or outdoor speakers.
>>1030595
Banana Plugs
>>1030599
Enlighten me
I want to get started with some simple woodworking but i live in a one room apartment with a balcony.
I had a summer job in construction which got me interested in building some basic shit. Ultimately i would like to build some small parts for a vehicle chassi that can be combined with electronics (im studying computer engineering) or something like a bridge or tower.
What tools would you recommend? Im not sure if i can start blasting a 100dB electrical saw in my apartment
You could run bamboo-PLA on a 3D printer but it's not the best filament for details.
>>1030330
This is pretty much all you need
>>1031335
thats not a lathe
thats not a mill
Hello /diy/, 31 year old uncle here. My nephew had a mental breakdown two years ago, apparently his conditions whatever they may be (doesn't trust his family) lead the doctors to recommend another inpatient stay and shock therapy.
He got re-accepted to University at 19, should be going back this fall. Wanted to make money on the side by building furniture for dorm rooms and just picking up thrown away pieces, but all he has is a pocket knife, and a phillips head screw driver. He's making a coffee table by carving old 2x4's in the basement (of a house his family does not own, the owner is letting them stay for free, family friend), sanding them down with old sandpaper, using whatever screws he has to put it together.
I'll post a picture if I see it when its done. Point being, I want to give him what I can.
Is pic related good for a beginner wood worker? I wouldn't know but I think I have an idea, any recommendations? How else can I help him as he tries to become a better wood worker and a good student?
Unfortunately my budget is $300, know that he'll be working in his single dorm room (single room for his mental condition, provided to him by uni), with a giant box fan for proper ventilation. Right now pic related adds up to $250 so I'll buy a power surge protector, some masks just incase, what else?
Kinda sounds like you nephew should be kept away from sharp objects.
>>1030150
I hate to admit that you're right but he's always in a better mood carving at the wood. He works up a sweat and smiles, which is extremely rare. He spends hours just carving, its taken him a week to get through the table top and sand it down the way he wanted.
I'm still doing this for him and he will be monitored at University, considering his special single housing, as other similar people are in this housing, there is a chaperone each floor (typical is one chaperone per house/building).
He's on a lot of medication right now, the newest one, Abilify actually seems to be making a bit of a difference, only two weeks in. I hope it lasts.
So, regardless of this, I'm taking a leap and buying him some tools. Any recommendations? His doctors agree it could be a good way to cope, but that he should be monitored.
A couple of hand saws will probably be more satisfying for him than that jig saw.
Looks like that varnish is meant to be sprayed, not brushed on.
That vise is meant for metal and will be useless for wood.
Exterior screws won't be the best for furniture. Get some normal ones, they'll be cheaper too.
I don't think Black & Decker has been a great brand in my entire lifetime, and a good quality used drill from a garage sale will be a better value.
Get him a good book. The Woodwright's Shop is a good one.
>woodworking in a dorm room
Wat.
Any math or EV (electric vehicle) bros here?
Want to build an electric riding mower.
Already built a remote contol push mower so i have the skills.
I would like to power the 2 deck blades with individual direct drive motors and mount a gear drive motor to the transmission so i dont ever have to FUCK with a goddamn belt again.
I would like exceptional cutting power but i dont want to hit a rock and detonate either. If mower driving speed and power stays the same it would be optimal.
Any ideas on wtf size motors and controllers?
The old murry i'm converting has an 18hp briggs and stratton for reference.
I know I can't get "exactly" what I'm looking for with the info I've provided. But you guys could help me drastically narrow down my options. Will post build thread in return / mow your yard if you are near SE Kansas.
>>1029925
DC or AC? Either way, unless you happen to be sitting on a pile of motors batteries controllers and inverters, this looks like it will be quite costly.
>>1029939
I just got a part time job and probably dc cause cheaper. I got 2 houses next door to each other and im tired of messing with these bs gassers. Gonna make the deck detatchable so i can ride the mower around at local gatheri gs and not be the jackass on a 2 stroke banshee whike people are trying to talk.
Kinda crippled so i walk as little ass possibe but try and not be lethargic. We have mud runs and biker rallies a lot. Going to be a winter project unless my part time job picks up. Gonna try for lifepo4 but throwing 3 grand at an old motor might piss off the wife. Lol. I got a buddy who is a proffessional pinstriper / painter for a living. Probably mowing and also taking it to car shows.
>>1029925
You're looking in the range of "big and expensive".
Just to match the old engine for half an hour, you'd need about 7kWh worth of battery. If you're willing to spend an unreasonable amount of time building your own pack AND were able to get a steal on the batteries themselves, you could probably find suitable cells for about $3,000. Assuming lithium, anyway. You could use lead, but you'd see a large increase in weight, and they wouldn't last very long in terms of cycle life. You COULD build an excessively large pack with lead to keep depth of discharge low, but then you start to lose out on any cost advantage you had by using lead, and add even more weight.
I'm inclined to think your best bet for motors would be other electric mowers. They generally run straight from DC and don't require any controller.
The drive motor could be done with a larger electric scooter motor/controller, something in the 2kW+ range.
Honestly, I don't see much reason to do this. It'd be significant out-of-pocket expense and effort for...what? Avoiding some fairly minor maintenance?
I'm fixing an electric fan, which suddenly stopped working, and after oiling the rotor I've realized that the problem is probably the engine itself.
It has an induction motor with coil and a rotor. And I have absolutely no idea what might be wrong. I've considered buying new capacitor, as it is the most likely reason for the engine not to start up, but maybe you have other ideas. Thanks
>>1029762
>I've considered buying new capacitor
Its easy to test if its the cap. Turn it on and listen for a noise. If theres noise its probably the cap. Another way to test, thats less safe, is to turn it on and spin it yourself a few times as fast as you can. If it starts turning on its own it was a bad cap. If it doesn't its probably something else.
The main problem is a bad cap often leads to other issues. The cap fails and the motor is left energized but not spinning. So it heats up. Without any airflow to cool it you fry something.
>>1029763
Yeah, but unfortunately the motor doesn't make any sound. So I suppose it is the engine fried. Thanks anyway
>>1029762
Odds are very good it's the capacitor or the switch. The style of motor used in the typical fan pretty much never dies.
Hey guys
I need help with gardening, I want to make my backyard and front-yard green, long and beautiful.
Any experts with gardening that can help me out?
Weed & Feed is your best friend. Remove large established weeds by hand first.
>>1029539
"Feed" as in water the grass?
and "Weed" as in weed out the weed?
>>1029547
http://www.oneprojectcloser.com/when-and-how-to-apply-weed-feed/
Basic primer here.
How do I pour a floor?
I need a cement garage floor. I have dirt right now.
I have the floor dug down 4 inches and levelled. Sides are delineated with 2x4's. Bought some chicken wire to reinforce the bottom of the slab
What do I do when the cement truck shows up? What is the procedure like?
Is the general technique to just spread it around and make it as smooth as possible? Any tools you can recommend buying?
I plan to do a 10x20 slab alone...i have no friends other than you.
>>1029181
>I plan to do a 10x20 slab alone...i have no friends other than you.
Holy shit dude you're gonna fuck this up so badly. Post pics.
>>1029194
i know
( ._.)
>>1029181
Here, maybe this will help.
https://www.youtube.com/watch?v=8_xFIhvi6fc
/diy/ will defend this.
Better than phillips.
>>1029124
Torx is fine.
>>1029124
Yes? Better than Phillips or slotted.
Profitable making general.
How do you turn your maker abilities and collection of diverse, yet half-assed skills into something marketable?
>>1029080
>learn to weld
>???
>profit
Hardly anybody knows how to weld so it's pretty easy.
>>1029107
I have a TIG welder. I can weld, but I have no formal training or certifications.
There's a lot of liability in many welding repair/production jobs.
>>1029113
I guess it depends on where you're located.
I nearly finished welding school and I can make a lot of things no problem without having to get certified.
Hey /diy/, would it be possible to make a bullbar for my Ford Tempo? And if it is possible, what will I need? I know I'll need a welder, will this one do?: http://www.harborfreight.com/welding/mig-flux-welders/90-amp-ac-120-volt-flux-cored-welder-61849.html
There isn't much of anything to anchor a bar to on a Tempo.
For a functional bull bar I'd use a cheap stick welder, but you would still have a shitload of work involved trying to attach it. It would be useless.
If you want to push other vehicles or hit deer for fun get a pickup truck.
If you want to weld, which is incredibly useful, I suggest starting with AC/DC stick. The little Harbor Freight things sort of work for some sheet metal but they aren't very good.
Visit some welding forums to learn more about welding.
>>1029034
Anything is possible when you know how to weld, and that welder will only weld up to 3/16 thick, in the hands of an experienced welder. I own that model and I'll tell you to buy a used Lincoln 110 unit, much nicer to weld with plus it won't break after 2 hours of welding. For the bar you're gonna need some tube, if you are making classic styled bull bar, no you can either miter it with a chop saw, or you can bend it around something. Make sure that your brackets mount to something secure and you should be good to go
>>1029034
Check local laws on bar compliance before you build.
this is a pneumatic piston
i use them to actuate the shifter and clutch lever on an ATV engine for a school race car. it currently runs off of Co2 and the entire system is kind of bulky.
i want to maybe use electromagnetic pistons so it can run off the battery and wont require pressurized lines running all around. i cant find anything that would suit my needs given some internet searching.
does anyone here have any suggestions or have a link to a magnetic piston that may suit my needs
thank you
>>1028242
Use a servo.
>>1028242
you use the word in your post so if not trolling, "linear dc actuator"
>>1028242
>Magnetic Piston.
I think you mean Solenoid.
Anything that meets your requirements is gonna cost several hundreds of dollars and eat up a shit ton of power.
Use a servo motor instead.
I need to weld this on my old steel bike. Where can I get thet done, maybe a car bodyshop?
>>1027499
Other side, I think it was spot welded originally
any place that welds, really.
>>1027502
This part needs to be soldered I think.
What do you think about the paint? I actually like the scuffy original paint, but as this bike is from 1979 do you think I should repaint it? There isnt any rot, just minor surface corrosion where the paint is chipped.
I've been thinking about buying a robomower, but i have multiple lawns completely separated from each other. Does anyone have any experience or ideas regarding this? I was thinking about tunnels or ramps to connect them.
>>1027424
I can honestly say I've never heard anyone with a desire to spend to much effort on getting out of an easy job.
You'll spend more time fucking about with muh ramps than you would just mowing the lawn.
Fat/10
>>1027424
Hi, /out/!
>>>/out/821548
>>1027426
>getting out of an easy job
Are you bugguy/pont from /an/ and /out/ with that 6'x4' "lawn"?
Some of us have lawns that take all day long to mow. I even have a $10k zero turn riding lawn mower with a dumping grass vacuum that makes it really nice to mow and it still takes all damn day to mow.
I'd probably just get a few ruminants instead.