Anyone has ever built a greenhouse?... Any advice
If you live north, get a bunch of double paned glass and aluminum poles as main support. Build a wood frame for more stability if needed. Walls do NOT need to be glass. A cheap plastic, wood, cement, or any material you want is fine.
And lastly, make the roof segment facing south as large as possible, extend is farther down than the North face of the roof.
>>1085570
Harbor Freight has a cheap greenhouse to get you started. I'd start there in case you decide it's not something you're really into, you wouldn't waste a bunch of money.
>>1085570
If u count spending a few grand on lighting and growing supplies to turn my spare bedroom into one then I have. Highly suggest some sort of sprayer so u dont have to bail water all of the fucking time. Quality led grow lights will help trick you olants into thibking its summer while also being energy efficient. And a wood stove will help if its cold where u are. All my shit died and i gave the gear away. Best of luck to u. Ill never fucking garden again. One of the worlds largest greenhouses is in town. They use some sort of plastic for the roof. Its clear and the best description is they buikt a tin roof with it. I dunno. They are fucking jews so i know its cheap. Ill ask them where they get it. Dont wast your money buying harbor frieght shit
Not sure if right board, but, I have had this cute Miku plush for around 3 years now and as you can see half of the hair is splitting up from the other half of the hair, so I want to know what kind of glue am I supposed to use for this and also, where can I buy it ? Sorry for the quality on pic related, my cellphone is trash.
>>1085297
Maybe tacky glue, check for glues for fabrics.
>>1085297
>>>/cgl/
Bumped from page 9 because of how helpful I am.
DO NOT USE SUPER GLUE
cyanoacrylate aka super glue, krazy glue, etc can start fires if placed on natural fibers like cotton or wool
That looks like it is felt which is normally compressed animal hair
There are horrible screeching sounds coming from my crawlspace. It was coming from my attic a month ago but stopped after a few days. Now my house smells like burnt chicken, and the noises are getting louder.
What kind of protective gear do I need before I investigate?
Please respond.
no doubt anon, this ones a job for Mexican Armour - Mexican at the front, Mexican at the rear - while you retreat a safe distance away, after instructing them to carefully and loudly describe anything that attacks them. You missing any pets, family members, or anything?
>>1085114
>DIY opossum catching
Good luck, man. They're real fighters, even after they get fried half to death after chewing into your live wires.
my grandmother had a 30lb raccoon fall through her ceiling and she is 82 and shooed it outside. nothing that is up there can hurt you more than a few shots would fix.
Hey /diy/
I would like your opinions on a tools bag.
I'm an IT Tech for copier, I have to carry my laptop and cables, some screwdrivers, a lot of small pieces (like rollers), and sometimes heavy parts.
After some search I found this two bags :
CK Magma Rucksack Plus
http://www.ck-magma.com/products/technicians-rucksack-plus
CK Magma Tool Case (not the Plus)
http://www.ck-magma.com/products/technicians-tool-case.com/products/technicians-rucksack-plus
Did anyone of you carry tools in a bagpack ? Is this better than a shoulder bag ?
>>1084940
thinking about getting a backpack. i believe its more handy and better to carry. The one on the picture seems alright, google makita tool backpack, ive seen on of those IRL and it looks like there is more room in he middle, for example to a laptop.
it also has a hard plastc shell covering the bottom part, which is pretty good. saves your eq. from any water on the ground and protects against impact( a little)
Also; could you help me with a calculation? Im studying electrics and i cant get this
equation to work on my calculator
And i cant really start a new thread.
46200/230*√3*cosϕ=
>>1084940
It is better. I'm a gas mechanic and have pic related as a test run. You have all your stuff with you, without having this one-sided load on one shoulder. You also have both hands free (which helped me not falling down stairs). I'd recommend it.
>>1084951
not op
thats right! didn't think about the whole two hands free thing
Hey /diy/ my nephew has been really into WWII and I want to make him a little Enfield rifle, any ideas on how to get this bolt to look natural?
>>1084899
Sand it down, heat it until its red hot, then bury it for a week
http://www.replicaweaponry.com/denix-wwii-british-lee-enfield-replica-rifle-smle.html
>>1084899
Hey OP I can help!
Drill a little hole in the bolt (vertically down the bolt, not horizontally) and install a small nail/firing pin
Alternatively spot weld the end and shape in with sandpaper to give it a little firing pin made of weld.
Next you take some metal tubing sealed at one end, line the hollow opening at the back of the bolt. Once lined up install a spring, to test you have done it right pulling the bolt back should compress the spring so letting go of it will make the bolt shoot forward.
On the other end of the assembly (the end where the firing pin goes) install a preferriably riffled barrel you can insert a round into.
Get all this shit stick together but make it look like a replica
Pull the bolt back and lock it into position (the spring should be compressed) and load a round into the barrel. If you've done this correctly then knocking the bolt up should make the spring push the bolt with such power that the firing pin strikes the primer of the bullet sending a projectile down your barrel of choice.
Congratulations, you have a working pop gun that shoots genuine boolits.
Greetings from /k/
>friend with nasty neighbors
>neighbors run the HOA
>fuck his life
long story short he has to cut 3 trees that are on his property
I looked at them and they seem easy to cut
>7-8ft tall trunks
>15-20 (relatively big) branches start almost in the same place (7-8ft)
>mild slope (3-5%)
plan (next spring)
>put ladder on the tree
>cut branches one by one
>cut trunk
>cut everything in pieces
>load trailer, take home, let dry
>enough wood for whole next winter
What can go wrong? (I have a big chainsaw, ladder and trailer)
Any diy suggestions to get rid of the stumps?
Picture not entirely related
>>1084442
i think that's how professional lumberjacks did it with the tree behind my house so it seems like a good method
>>1084442
Stumps? Drill 15-20 deep holes in stump surface, pour 1 lliter of diesel into holes. Wait til the stump dies horribly (late summer if done in spring), then yank out dead stump with saw and rope/chain.
>>1084448
how dirty was after they left?
is it worth messing with a tarp (saw dust)?
or should I just leave it there?
maybe one pass with a lawnmower?
I'm asking all these questions because asshole neighbors
Do you know any simple sofware that let's you program arduino through PLC languages such is ladder or sfc?
Apparently real coding isn't for me.
I'm being formed into domotics and automation as an electrician, so at least I know those.
>>1084283
I think someone in a c course I had two years ago had used soapbox snap(?) Or something like that. Have you tried googling for ladder logic/contact logic for arduino?
>>1084286
yeah well, i fund that soapbox one and others, but I wonder if there were an specific one that is the common to go for, also easy, like, for dumb people.
I might try those then.
Just want to automate a lamp with a PIR, a photoresistor and a push button tbw.
>>1084293
that is pretty easy man... i would just use arduino ide for stuff that simple.
These Parallel cables look beefy.
How much voltage do you think each pin could take? Would it take 1-2 kV and very low amps?
>>1084129
Oh, definitely. I've got an old oscilloscope from the 70's that has 28AWG leads, so those pins are well-suited to the task. "Thin Lizzy" they called it.
I was going to test it with a neon sign transformer, but I just cut it open. They are certainly thin!
>1-2 kV
kek
Just changed our the power steering pump and alternator on the wife's car. Trying to put it all back together and I can't figure out where this fucking cord goes. The alternator already had both of its connectors.
2008 Kia Rio
Front profile
It comes out of a wire sheath with 2 wires that attach to the alternator
Plz help
I want to know how to build my own "predator vision" goggles.
I haven't seen anyone building vision enhancement that can switch from different modes.
How complicated is it? Has anyone done it?
Also, can you make things like electric currents/fields, magnetic fields, X-rays/gamma rays/radio waves/etc translate into a visible medium?
It would be neat to be able to see the invisible world. I'm surprised I haven't heard of anyone doing this.
I love how the cold parts of the cat are exactly those where a Siamese cat has it's cream points.
>>1083912
Well who wouldn't want that. But it's not something you can just make in your room. I think the closest you get is night vision goggles the military use. Or other big infrared systems, radars and such on planes. Btw the chinese supposedly developed a new kind of "quantum radar" recently.
You can't see radio waves because they are too long and go through stuff. There are radio telescopes, not sure if they output images or what. But those are nowhere close to being goggles, you need many of them spread across a huge area.
As for short wavelengths, I'm not sure there's equipment to make them into images or video. You can find portable x-ray machines though. Maybe there's some other kind of medical equipment.
Besides that you could also turn sound into video with echolocation. Or silent videos can be turned into sound for that matter by the vibration of objects in the video.
There's something I thought about though, you know the movement detector in the alien movies?
It should in theory be possible to make something like that to "see" through walls and such. It could use normal wifi signals.
>>1083376
>very specific
>washer
Not sure if troll or just stupid
The portable electrical ground.
>>1083380
>just thinking thats a normal washer
whats the coolest thing you've made from wood?
I have questions about joinery...
like how do you make certain joints?
(labelled here as the "mortise and tennon" "lap" and "box" joints)
I have a project that might require actual joinery and the concept frightens and intrigues me...
>>1082261
Depends on your tools. I tend to smash out tenons with a skilsaw. A plane, hammer and chisel.
Tenons are a whole different game. Having the right tools for the job is a must.
>>1082267
my father collects tools.
I happen to have access to a mortising drill(small stroke-length)
I suspect you had a terms malfunction...
which thing is the thing that is difficult?
>pic is an example of one of the projects I'd like to learn this on.
>>1082261
>like how do you make certain joints?
howtousegoogle.jpg
mortises are made with a mallet and chisel, with or without drilling out first to remove bulk
tennons are cut with a saw
laps are cut with a saw/chisel
I already asked this in /biz/ but you guys can probably be more helpful. Is the threat of automation a legit concern to someone who wants to start a long-term career as a trucker? This is my dream job and I'm ready to sign up to a driving school, but I don't want to get my hopes up yet.
>>1081955
>Is X going to be replaced by robot soon, should I learn X?
No, do whatever the fuck you want, everything will be replaced by robot soon
>>1081955
Long haul automaton is already being tested, and I bet be in place in a decade. There will probably be new jobs created though to get it from a central depot to the customer, as their sites may be construction with "roads" or just shitty back alleys.
>But I'm not an expert or even a trucker.
>>1081955
When automation comes closer to being a threat. Unions will start creating laws preventing companys from going full automation.
For example truck driving is big in the US because we don't have rail systems like the EU. Id say you would see automation come into the EU 10 years before the US would consider it.
Hey friends-
I've recently discovered that I really like EE as a hobby, and enjoy building and tinkering quite a bit. My current lab is a big fishing box full of parts and a handheld multi-meter. What I'd really like to do now is set up a small lab in my house (and eventually garage, first time homeowner soon) and I'm wondering what equipment would be good to obtain to get started. What I'd like to get is:
1) A bench supply or supplies (am going to build one of those computer PSU conversions, but in a case so you can just swap the PSU if it goes bad) for basic 5v / 3v / 12v stuff, but I'd love to have one that goes up to 200v so I can test things like VFDs and Nixies. Been eyeing Power Designs supplies on eBay, they're so visually appealing!
2) An oscilloscope, maybe a Tektronix?
3) A better multi meter. Using a random Southwire one from the Home Depot.
Anyone have suggestions for brands/models? I'm doing this slowly so money is not really a problem, but I don't want to get stuff that would be overkill if I don't need it. To give you an idea of the types of projects I want to try:
1) Reviving an old S-100 computer and building some kit boards/reviving old boards
2) Building some kind of single board computer from scratch (possibly based on the Intel 4004, I have a set handy, but I may go with something more common first)
3) Maybe do some demoscene stuff?
I realize these are pretty ambitious newbie goals, but hey, if I don't tackle this stuff, how do I learn? Also open to suggestions for any kinds of learning projects you can think of to help me eventually reach those goals.
>>1081400
buy a power supply that can be put in constant current mode (it turns the volts down to stop the amps coming up). CC is incredibly useful and you'll never regret spending the extra dosh.
digital scopes age really badly.
a 10 year old tektronix is going to be hilariously slow, clunky and featureless compared to a new rigol at the same price.
if you're self-teaching rather than troubleshooting, you'll want a function generator to go with the 'scope.
you don't need a better multimeter unless you're dickwaving, but whatever. flukes are nice.
>>1081420
Cool deal, thanks for the info.
I thought the same about the scope, unless I can get an older one at an insane deal, but looking at many of the features on the new ones would be the way to go. Will definitely check out a function generator. May invest in a fluke, but like you said, so far my el cheapo does what I need it to. Maybe I need more accuracy when doing the single board rig, but I figure by that point I would have also made some more additions to the lab.
Any suggestions on a CC brand/model?
>>1081400
> 3) A better multi meter. Using a random Southwire one from the Home Depot.
If it has a fast (semi-) latching continuity test mode, a decent display, is auto-ranging and doesn't eat batteries just keep using it. IMO those are the only things which matter, precision/protection ... irrelevant.
>>1075677 - last
tp://pastebin.com/9UgLjyND
>I'm new to electronics, where do I get started?
There are several good books and YouTube channels that are commonly recommended for beginners and those wanting to learn more, many with advanced techniques. The best way to get involved in electronics is just to make stuff. Don't be afraid to get your hands dirty.
>What books are there?
Beginner:
Getting Started in Electronics Forrest Mims III
Make: Electronics Charles Platt
How to Diagnose and Fix Everything Electronic Michael Jay Greier
Intermediate:
All New Electronics Self-Teaching Guide: Kybett, Boysen
Practical Electronics for Inventors: Paul Scherz and Simon Monk
Advanced:
The Art of Electronics by Paul Horowitz
>What YouTube channels are there?
https://www.youtube.com/user/mjlorton
https://www.youtube.com/user/paceworldwide
https://www.youtube.com/user/eevblog
https://www.youtube.com/user/EcProjects
https://www.youtube.com/user/greatscottlab
https://www.youtube.com/user/mikeselectricstuff
https://www.youtube.com/user/AfroTechMods
https://www.youtube.com/user/Photonvids
https://www.youtube.com/user/sdgelectronics
https://www.youtube.com/user/TheSignalPathBlog
>What websites feature electronics projects or ideas?
http://adafruit.com
http://instructables.com/tag/type-id/category-technology/
http://makezine.com/category/electronics/
>Where do I get components and lab equipment from?
digikey.com
jameco.com
sparkfun.com
ramseyelectronics.com
allelectronics.com
futurlec.com
ladyada.net/library/procure/hobbyist.html
mouser.com
alliedelec.com
newark.com
ebay.com
>What circuit sim software do you use?
This mostly comes down to personal preference. These are the most common ones though:
NI Multisim
LTSpice
CircuitLab
iCircuit for Macs
>What software should I use to layout circuits?
Circuit Wizard
ExpressPCB
EAGLE
KiCad
>>1081026
>tp://pastebin.com/9UgLjyND
how long has it been like this and why did nobody fix it?
working on getting a UPS working, got it for $30 at a recycler
these batteries are fucked right? I tried plugging it in but no lights would come on, nor would it power anything out the back
>>1081074
Most likely
you can try to charge them if you want