Why isn't the CAR (Center Axis Relock) shooting stance more popular?
>>34155594
its a meme.
>Not as steady as front facing stance
>Not as small a target as sideways stance
FPBP
Is there something wrong with this picture? (magazine?) It's from new Twin peaks. Did prop guy fuck up?
>>34155543
Considering it's David Lynch he probably did that on purpose to trigger autists.
>>34155543
No, thats pretty typical for HK
>>34155543
if you feed the cartridges in backwards the guns becomes less lethal. This is because when you shoot the gun, instead of the heavy, fast bullet shooting out, instead the light brass case shoots out. Since the brass case is so weak and thin, it can't penetrate the skin of someone, and so it's a good less than lethal alternative.
pic related
seems like a mix from a VZ58 and SKS
the side says "MADE IN CZECH REPUBLIC PPK"
with a K in a big circle
its just a vz58 without a pistol grip
Flip it over and show us the action and the markings.
As far as I can tell, it's just a vz58 fitted with a traditional stock.
https://www.youtube.com/watch?v=8v98jvDB-NE
/k/, why are most folding knives oriented for tip up carry?
i've been carrying a kershaw blackout for 12yrs (tip down design) and recently started trying different folders. seems like all i can find in "quality" knives are tip up and they're very awkward to handle.
is there a real benefit?
It's just more natural to close your knife and drop it in your pocket, also when you pull it out it's facing the right way.
>>34155477
but in tip down my hand is already on the pivot. just have to drop the handle into my palm.
seems like with tip up i have to walk my fingers up the handle to get the right grip if that makes sense.
bumping with most recent purchase
What would it take to weaponize chainsaws?
No, that's stupid.
>>34155454
Attaching a gun to a chainsaw.
lighter weight
a hilt
a chain that doesn't get dislodged from the tracks rendering it useless
Need help identifying a gun and scope. Wtf are they?
Some 9mm smg and a shitty oversized rds
That's an awful lotta picatiny.
>>34155389
Is that a FAMAS?
This rifle is superior in every way compared to the M4/AR15.
>More accurate than any AR15 you can buy
>More sturdy than any AR15 you can buy
>More reliable than any AR15 you can buy
>More ergonomic than any AR15 you can buy
It's the ultimate service rifle.
Prove me wrong /k/.
It's heavier, for one thing.
>>34155263
have you ever fired either
folded over a thousand times with superior german steel
Thread theme: https://www.youtube.com/watch?v=zVtbEmzjUxk
Notoriously unreliable weapons and vehicles that were dangerous to their operators. Post and discuss.
it flamed out on take off, sending it into the sea.
>there were occasions when Komets exploded on the tarmac from the propellants' hypergolic nature
>inb4 m16
How did Duncan McCloud of the clan McCloud, the Highlander born over 400 years ago, successfully conceal a katana?
https://www.youtube.com/watch?v=9A-aL49F0Jc
A real samurai.
>>34155245
Trench coat
Its like you've never seen anything about the Highlander
>>34155258
Oh, I know just wanted to hear someone else say it. But you think sitting down would be a problem for concealment.
Also I know weebs like katanas so I'll figure I'll get some real life advice out of this.
Since push feed rifles are cheaper and work just as well as controlled round feed, why do they still make controlled round feed? Does anybody actually think it's necessary?
>>34155053
bolt rifles are better suited for precision shooting, and for a number of reasons
when you shoot and auto feed there is a lot of internal movement inside the weapon which can cause it to be off by however much
while a bolt rifle is simply click boom, you do the racking
not to mention that if your a sniper the last thing you want is for someone to see a glimmer off of some ejected brass when you take a shot
controlled feed works upside down desu
>>34155573
>>glimmer of ejected brass
wtf no
Testing in 2 months.
Fastest way to master the 1.5 mile run?
Pushups required are like 22, and I get 88 without stopping. Situps are just as well, but I've always been a gymrat and have no idea what to do when it comes to cardio?
tl;dr please help, only know how to put things up and down, need advice on 1.5 mile run progression and cardio
The minimum is 15 min and I'm at 15:15, but I need to get a better run time than that, the academy is a lot harder than the minimum.
>>34155043
>100% (as in full effort) Sprints until you are too tired to Sprint anymore.
>Sprint more
>100m sprints
>In between Sprints you do light jog.
A lot of people can run 2 miles in under 15:15. Stop being a bitch and quitting. I wish someone would give me 15min to run 1.5 miles. I'd take a smoke break half way through.
Not that bad.
Hard mode: Have a buddy stand behind you with a resistance band around your waist pulling backwards as you Sprint
>>34155114
this is retarded
>>34155043
> 1.5 miles in 15 minutes
Nigga you could run that backwards. Honestly, if you lift, stop lifting and just do bodyweight and cardio. Extra weight will only slow you down.
Heres the routine you should be aiming for:
> day 1: 2 mile run at decent pace
> day 2: push ups, sit ups, pull ups, squats
> day 3: hill sprints/lamppost sprints/HIIT
> day 4: push ups, sit ups, pull ups, squats
> day 5: 2 mile run at decent pace
> day 6: long slow jog for at least 4 miles
> day 7: rest and recover
ITT sad fact:
US have arguably the best gun laws, but the best guns are made in Europe.
At least the best swords are still made in America i.e. Albion.
>tfw Country doesn't produce anything other then tit juice and wool.
>>34154869
>AK74 vs AK47
This is some bait
>DAILY REMINDER THAT AMERICAN GREATEST GPMG WERE DESIGNED IN AND BY EUROPEAN...
Hi I have looked at ak/ar build kits but I want to make a scratch build and the rotating bolt and carrier looks hard to machine at home?
I'm looking to make a semi auto rifle in a common caliber like .223/308/30-06 and using common mags.
Would a rollerlocking bolt / locking flap bolt / toggle link bolt or tilting block bolt be easier to build a rifle around?
I have built smg with blowback before but I want something more effective and easy to produce in quantity.
All help is appreciated!
No machining experience, but I've been interested in the same thing. After looking into it a bit out of curiosity, I think it's totally doable, you just need to take the appropriate precautions.
Are you thinking of a gas system or no?
Using rollers or levers would be what you'd want if you're not using a gas system; flappers or a tilting breechblock would be for if you are. That should cut your choice in half right there.
As for information, rollers would probably have the most information out there that you can rely on.
I thought to use a gas system maybe a direct action like the ar/15 as it is a part less to machine.
It would also be good if it was easy to make from tubes as it would be less expensive then machine from blocks, but i could cast aluminium parts and machine from if needed.
The tilting block is intresting but i have not much info abourt it.
Why do you think that a roller locking bolt should not be used with a gassytem?
>>34155229
>Why do you think that a roller locking bolt should not be used with a gassytem?
Rollers are mostly used in roller delayed systems, which is a type of delayed blowback.
I'm not really sure what the advantages of using a roller instead of a fixed piece of metal would be in a gas system like the picture, but it seems like it's just one more complication for a homemade gun.
As for direct impingement like with the AR15, it might be less parts, but you should look up what it involves. The bolt and bolt carrier form a piston, then the gas gets pushed behind the bolt in the chamber formed with it and the carrier to push the bolt out, where I think it uses cams to rotate the bolt around. If you're not using a rotating bolt, you might have to develop your own way of unlocking instead of basing it on something else.
A short piston gas system would probably be easier, it's just a rod and a spring that pushes against something, and piston systems have been used in a bunch of different ways, so you have more ideas to choose from.
/k/, why haven't you begun training in the Art of Longsword yet?
Because I don't particularly want to, I have an 870 by my door and used to do boxing, I'm sure that will suffice against >2 people.
Laziness.
>>34154779
But I have. Shit's fun.
Personally I'm a bit of a Fiore fanboy.
Video is a bit cringy and LARP-y but shows some neat stuff to learn.
https://youtu.be/4GoQlvc_H3s?t=2m10s
And they are hungry from fasting all day!
You have 90 seconds to get your shit together and dispatch the invaders...
Who did you fair?
>>34154745
Who do I fair? My good friend Wilbur, of course. Or maybe his buddy Babe.
>>34154745
plant a cross on the east side of my yard and lay out food and water.
>To the contrary, “if your enemy is hungry, feed him; if he is thirsty, give him something to drink; for by so doing you will heap burning coals on his head.”
>>34154745
Muslims are based so I'd give them food and drinks if they want any. Don't got any halal stuff but got plenty of chicken sausages if they want any.