Where's the best place to get Glock 19 slides? I dont mind if its OEM or custom, but prefer non-hyper-racegun stuff.
Pic related. Buying a normal Glock 19 is 100% out of the question.
Gunbroker has a few listed
>>33910821
why is a normal one out of the question?
>>33910821
Brownells has the for 70 bucks.
Sup /k/,
Can you help me identify this helicopter? I saw it and an identical partner taking off from pretty much central London (financial district).
Sorry for the shit photo.
>>33910739
Here's an even worse photo of the two of them.
>>33910739
Apache.
>>33910739
Apache
What is the large cartridge on the left?
From the right in order are:
5.56, 7.62, .338 lapua magnum, .5, and something huge.
What could have fired it? Found it in the firing range of an IDF base.
.50 FAMAS I think.
20x102 mm
maybe a 20mm casing?
The Reds are coming! Are you ready?
>>33910589
Are they all clones?
Дa
I'm sure some of /k/ has used this site. Any thoughts on previous purchases? I'm thinking of buying an SKS, and am very hesitant because of all the bad reviews that follow a google search.
>>33910449
I tryed to sell sheths on there did not sell I dont recomend it
>>33910462
Don't recommend to sell, or buy? or both?
>>33910449
Ugh.
I actually had a thread made for gunbroker shit earlier.
I'm currently dealing with the fallout of a dickhead being very...well, not understanding in the slightest.
You'll either have a really fucking good experience or it's hell but there's really no in between.
I bought a Gewehr '88 and it was excellent.
Shipping was fast, customer service was excellent.
But if you fuck up, not even god can help you apparently. Be VERY careful about accidentally clicking buttons (I'd reccomend not browsing it via mobile because of this)
Gear id thread? Gear id thread?
What jacket is this
>>/fa/
>>33910457
>military gear
I don't give a flying fuck about /fa/ggots
>>33910429
Bump
ITT 1911 love, hate, questions and hate of all things double action or polymer.
>Bought a used Norinco 1911 that had been shot very little.
>Put 500rnds through it and the locking lugs have noticeably changed.
This is early signs of peening that the model is known for. Not a gunsmith but this needs to be replaced immediately?
>>33910292
Depends. How much lug contact do you have to begin with?
Take a candle and soot up the lugs on the barrel, and then soot up the slide lugs. Reassemble the rifle, and cycle the action a few times. Disassemble. Look where the soot has rubbed away, that's how much lug contact you have.
>ok I did this, and have almost no contact, now what?
Option 1: Take it to a smith, see if he can re fit it
Option 2: Get files and sandpaper, try to refit it yourself (unlikely you have tools or skill for this)
Option 3: New barrel.
But see if you even have anything to worry about first.
>>33910292
The are good guns, its weird that thats happening. I would buy a new barrel before taking it to a gunsmith.
>pic related
Norinco 1911 with noricno 84s.
>>33910523
>>33910292
also, you should inspect the the slide for marring.
Does anyone have any experience with these 22lr mp5s? I'm thinking of selling my sks to get one so my 6 year old brother can learn gun safety without losing his shoulder.
>>33909978
Tell him to quit being a manlet. If 6 year old terrorists can shot AKs than your bro can shot an sks
>keep sks
>buy 10/22 instead
>>33910158
/thread
And kids, this is why you should never get on a helicopter
ok thanks
His jaw.
RIP
This is why I always refused to get on a helicopter, once a small mistake happens you're kill
thanks dad
this is going to sound crazy but hear me out
guns are a universal language
wait, its true. If you gave a rifle to a Russian, an American, and a German; each one of them would know what each part does, and how to strip it, without speaking the same language. why? because its not math thats the foundation of sentience, its guns. so if we ever met aliums, we could communicate with them through guns.
Please stop murdering threads.
>>33909657
They say food is universal as well, but you're just trying to apply hippy logic to guns.
>>33909657
>>>/420chan/b
QTDDTT - Poor fag edition
Didn't see one
Alice Components I have: 3x belts with 4x 4 slot mag pouches 3x 1 qt 3x 2 qt and 3x Y suspenders(probably change them out)
Alice Components I want: 3x Butt packs for sustainment
I have setup up at least 3 kits Need opinions and will not go to GQ as they only buy and trade
>Gunslinger: Buckle is at 10 o' clock, Condor MA35 middle, 2x 4 mag pouches to the side
If i have to pull this out and load up then shit is really bad.
>additions: a SAW pouch to the 9, a 5 quart camelback to 3, and a high riding buttpack
>2x hunting rig
>1 mag pouch at 2, 1 condor MA67 at11, 2 qt at the 6
>additions: buttpack
>reason for addition: Saw = more food or ammo, water of course and under the arm for balance, buttpack = food and sustainment in general
>>33909635
a picture would help.
>>33909653
I would be terrible DM if that was the first question within 5 minutes.
Just imagine any navy seal or low speed high drag dude with SAW pouch on the side of his PC under the arm
Now imagine the same thing with a large Camelback.
Then put each on an ALICE web gear set
Looking for a new trigger for 3-Gun. I just bought a PST gen II, so I'm looking at the cheaper side, ~$150-200. Suggestions? Preferred 4 pounds or lighter.
I had this gun for a while now and I just want to know if it is counted as an antique weapon.
Pic of full gun
>>33909620
If it's made in or before 1898, it is. In the US.
>>33909620
Depends on the date of manufacture. Ask the milsurp thread.
Looking for a cost effective tank to buy, this 1 I found costs 19k. Thoughts?
T-54/55 tend to be the cheapest.
Buy a $20 fleshlight to relieve all that pent up jizz, then decide if you still want a tank.
>>33909341
Already done anon, still want it.
Found this stripped Romanian under folder for sale and I'm tempted to buy it but something seems fishy. As you can see, it's in pretty bad shape. When asked, the guy said his "cousin started a fire too close to it". He also won't give the serial number for me to check and lives in a rough part of town (also hand tats. Just sayin). Basically, is this gun too sketchy to buy and how damning is fire damage?
Tatted up hands = felon?
Can I save her?
Were all the nonmetal parts destroyed by the fire? That rifle looks like absolute garbage you would find abandoned in some african river, hell I wonder if it's a machinegun
Sup /k/,
Im skating for the next week and bored out of my mind, so I can answer any (most) questions y'all have about combat medicine and/or the navy. I'll dump with combat trauma knowledge and stuff.
Source: Im a Line HM with 2nd MarDiv. (FMF/SW). Fuck tanks.
There are three phases for Tactical Combat Casualty Care, or TCCC, they are as follows:
1. Care under Fire (CUF)
2. Tactical Field Care
3. Tactical Evacuation Care
When evaluating a casualty, HMs and Combat Life Savers (CLS) marines will follow the MARCH algorithm, which is as follows;
Massive Hemorrhaging
Airway
Respiratory
Circulatory
Head/hypothermia
pic unrelated
CUF
The first step when you receive a casualty is to return fire immediately and gain fire superiority. Remember, the best battlefield medicine is rounds down range.
During this phase, when you are not under effective enemy fire, try to reach the patient and treat ONLY life threatening bleeding, usually meaning amputations or severe hemorrhage from femoral bleeds. If the patient can do it himself, instruct him to do so. This negates unnecessary risk of another person getting shot. If not, approach the patient carefully and quickly, and provide aid. The only treatment you will do in CUF is apply a tourniquet (TQ). There isnt time for anything else. Once you place the TQ, move patient to cover as fast as possible. Once the patient is behind cover, you can begin tactical field care
Tactical Field Care
When you are behind cover, first thing you must do is re-assess any TQs placed. Ensure tightness, if not apply another. Mark patient with "T" on forehead or other visible area. this helps identify as a critical patient. From here, procede to the A portion, airway.
Easiest way to determine airway patency is to talk to the patient. If the patient is screaming and yelling, his airway is open and you can move to the next step, being mindful to continually re-assess to make sure he doesn't lose airway patency. If hes not speaking and you cannot feel breath moving, reposition patient to open the airway. This can mean having the patient sit up and lean forward, place him in recovery position, or use headtilt/chinlift or jaw thrust manuever to try and open the airway. You may want to consider using an nasopharyngeal airway or another adjunct to ensure airway remains patent.