https://www.youtube.com/watch?v=pSjd3gtVq1U
Post your declassified material, stuff that used to be military secrets. Any format is welcome (pdf, vid, pic,...)
Bump, Basic stuff
Would a 20 guage shotgun be good for an heroing?
>>34756573
just suck on a grenade and pull the pin lol
You can an hero with a cell phone if you wave it at a cop.
https://www.estatesales.net/TN/Germantown/38139/1628484
>HOLY
>SHIT
>>34756479
>This thread again
There are some lugers and a few other milsurp pistols. And about 250 pictures of nothing.
>>34756495
/thread
How important is the steel a knife is made of? Since even expensive knives have lousy factory edges, I'm going to have to sharpen a knife myself anyway. In that case, why not buy a cheap stainless steel knife with a strong tang. The only difference between that and an expensive knife is the steel.
The difference will be how long the blade keeps an edge, how easy it is to sharpen, and how good of an edge the blade will take in the first place
>>34756422
Also how easily it will break or chip. Different kinds of steels can be useful for different kinds of knives... though I've heard (presumably) knowledgeable people complain that not every company and certainly not every end user knows which these are.
>>34756385
The difference in the steel itself is fairly minor, it's the least important factor on whether a knife is good.
In order of impact on whether a knife is good or shit:
>good design
>good heat treatment
>good edge geometry
>type of steel
Someone who really knows how to do tempering can make a pretty fucking durable, easy to sharpen knife out of chinesium "stainless" steel, but on the other hand random-chinese-sweatshop that fucks the temper on S90V produces a garbage knife. This is why Buck's cheapos perform fairly well despite being 420 stainless (which is low-grade), and why Ganzo and Sanrenmu knives are still only mediocre despite being made with 154cm, S30V, etc (which are "premium" steels).
A well-made, properly tempered 420HC knife might have to be sharpened 1.5x more frequently than a well-made, properly tempered S90V knife. But it will cost 1/5th as much. The various "super steels" DO make improvements over the cheaper steels when all else is equal, but the gains are relatively minor. In all honesty some of the cheapest steels, the high-carbon steels, still make the best knives as they have excellent properties for everything a knife is due to their very low "not-steel" content that separates them from the stainless steels. Their only drawback is they'll rust fairly easily in comparison.
How was the action? Thinking of watching this, expecting gurll power SJW bullshit, but I'm cool with that as long as the action lives up to its director's background.
>>34756258
One good staircase fight scene and a little girl on girl. I expected more action but it was mostly cigarette smoking and talking.
I don't know his reputation, but it was all very pleasing. Life and death combat seemed properly brutal, and I thought it was nice to watch her work. I don't know if a woman Theron's size could take as many hits, but I guess the character just has a high CON score or something. Good cinematography and light and color. Nice period appropriate music. Based off some graphic novel apparently.
>>34756500
>Summer: the post
If you knew the beaner drug cartels were coming after you and your family how would you arm yourself?
>>34756137
I would get all of my guns and throw them in my car and leave.
Pack up important documents that may help them find us, grab our essentials, delete social media accounts, head to a VERY secluded family members house who has a guest house on the land. Ride it out. Then go out guns blazing if they ever find me.
Does somebody make camo with similar pastern?
>>34756076
>>34756076
aero had a tiger stripe upper/lower thing going for a while, haven't checked recently tho. Could just do it yourself with a rattle can....
I need you guys to make a decision for me. I am planning to purchase a Sig pistol in .40 short and gay. I can't decide between a P226 or a P229.
I might carry it later on in its life but I carry full size pistols so extra barrel length does not bother me.
Give me your thoughts my dudes.
P229 > P226
I'd also recommend getting it chambered in 9MM and investing in some quality expanding ammunition. There isn't much point to the .40 if you plan on carrying it.
>>34756155
I already have a G17, 92FS and a mid size 1911 in 9mm.
Wanted to diversify really.
>>34756224
Oh, get the P229 either way
Also the Beretta Cougar 8040's in .40 cal give me a hard on, but they are discontinued, one ones make by Beretta in Italy are anyway
What would happen if you accidentally loaded a round with a .311 bullet and shot it out of a .308 barrel?
te gun either wouldnt fire or it would break
>>34755756
stop being a retard and slug the goddamn bore of your nugget.
>>34755756
Nothing. Century put .308 barrels on the VZ-2008.
It increases accuracy but decreases barrel longevity.
I want some feedback.
>Does anyone have one and what type?
>What types of ammo have you shot?
>Where are the best ammo deals?
>>34755735
Get some SLAP for when rioting redguards steal an APC
The SCAR is a retarded meme gun and people who buy them are operator fags.
3000 bucks for a firearm that is no more reliable than a AR (especially from manufacturers like POF or Daniel Defense) has zero versatility, and at the end of the day does the exact same thing the AR and AK platform accomplished years ago, firing the .223 bullet accurately up to 300 yards with iron sites. The only purpose they seem to serve is making their operator feel like they're fighting the BUGS in Starship Troopers.
To top it all off the SCAR is aesthetically challenged at best, or, more likely, was inspired by the idiotic scribbles that toddlers create when they're trying to draw a picture that parents have to pretend to be proud of. It's wretched to look at. Even Glocks, which suffer badly in the aesthetic department, manage to look like beautiful works of art next to a SCAR.
t. fag
t. retard
t. poorfaggot
The SCAR is an excellent gun but mostly in .308 where it becomes the softest shooting .308 rifle
>>34755681
Oh boy this thread again
Sage and report then move on
Looking for any and all pics, diagrams, cutaways or manuals of the Agram 2000.
It's probably exactly like the KG99 or Carl Gustav on the inside.
not much out there
hows your russian?
Hey folks. I'm interested in recieving training to become a gunsmith. Yes, I know it's mostly relatively boring stuff like mounting scopes, assembling parts kits, refinishing, et cetera. I'm in need of a reliable source of income, and gunsmithing would be a good way to achieve that.
What's the best way to recieve training in gunsmithing? Are apprenticeships for it available, generally speaking? Are there any good online or mail-in courses available that would actually provide me with a gunsmithing license when I complete them? If so, what do they cost in terms of money and time?
Thanks in advance.
>>34755504
The Ark had some gunsmithing tutorials.
On same boat going to go into infantry and have no clue what I'm going to do after. I'm considering gunsmithing so far
>>34755504
>online courses
Fucking no.
Going to a school is your best bet. You'd have a really hard time getting an apprenticeship with zero experience. Alternatively, learn machining and take up gunsmithing after you're proficient at machining.
>gunsmithing license
No such thing.
Is it worth buying 115 grain tulammo when you can get 124 grain NATO spec ammo for almost the same price?
You could even sell the brass.
I bought 3k rounds of that. I think there's a finite supply so it'll be sold out forever in the near future.
>>34755516
But the fact that it's going for the price it is now shows where prices are sitting.
Will steel cased get even cheaper?
if I wasn't already sitting on a fuckton of Wolf I'd get some for sure
Can anyone help me identify this old 22 pump, found in a basement and it is badly rusted. Cheers.
Other side
yeah
https://en.wikipedia.org/wiki/Rust
>>34755257
Thats a gun of some sort