rip hildog edition
old >>31829060
mentally ill pls go
>>31834238
Please tell me someone finally took her out
>inb4 MI assault weapons ban
>>31834256
Nice target
>>31834256
neets first :^
>>31834259
wont happen
>>31834258
no
FBI reopened it's investigation
cynical thinking is that this is just another distraction from the emails
>>31834270
t. autism
>>31834278
Well I mean
I wouldn't say it's a distraction because it's actually about the emails
I guess Wikileaks is doin it's job
>>31834256
Nigger dog
>>31834278
i'd like to think if the FBI has the balls to reopen this so close to the election, that means they actually have something that is eligible for prosecution
>>31834274
reeeeeeeee
>>31834295
That might be exactly it.
If she gets in as prez, everyone involved with the investigation 2, electric boogaloo would suddenly commit suicide
So maybe they think they can get her
>>31834303
Coffee is shit
>>31834295
they'll just run us around a bit then announce she's perfectly innocent just before election day
>>31834284
That worked about as well as your legs do.
>>31834303
>paint on the dc
0/10 literally unusable
>>31834322
what are you fucking gay
>>31834315
fuck
>>31834311
kys teadrinker
>>31834321
i dont get it
>>31834322
gotta keep up the memes
>>31834333
yours is actually painted properly, not lazily stripped all giddy like
>>31834344
>Wheelchair denial
>>31834344
No, tea is fucking gay too
Hot drinks are garbage in general
Kys and nigger dogs plskthx
>>31834359
kys numale cacuck
Happy birthday Hillary Clinton!
>>31834359
not everyone lives in a liberal desert wasteland where hot beverages will raise your core temperature to the point of death. kys.
>>31834370
>paint everywhere
fuck off giddy ur still banned
>>31834370
>needs artificial energy
>calls me a numale
I bet when you're letting qb beat off into your mouth, you justify it with "well this will give me testosterone so I can be big and strong!!1"
>>31834384
Kek
>>31834389
wtf i hate qb now
>>31834400
>>31834400
don't listen to him
i'm telling you it will make you walk again
trust your uncle qb
>>31834400
>>31834411
Kek
>>31834418
>>31834408
>>31834400
>>31834400
And we all hate you
>>31834411
anything to walk again1
>>31834418
why you posting your gfs gun
>>31834238
VOTED EARLY TODAY FOR TRUMP
LOCK HER UP
>>31834429
>>31834418
>>31834408
>>31834400
>>31834431
>>31834430
>>31834438
>>31834429
>>31834418
>>31834408
>>31834400
I have more pistols than I realized
>>31834450
too bad they're all shit
>>31834450
>>31834438
>>31834429
>>31834418
>>31834408
>>31834400
>>31834400
>>31834400
>>31834400
>mfw no 44mag pics
Wtf
I'm trying to plan my build, but as an NJ resident I'm having trouble finding an unthreaded barrel that I want. I'm looking for a 16" mid-length gas style, gov-profile barrel with a 1/7 twist, but haven't found one without threads. Any hints where I could find one?
>>31834450
>p22CA
>>31834256
No
>>31834038
Hey bb <33
>>31834480
It's not that great of a gun
Will only work on cci minimags
>>31834450
They multiply rather rapidly.
>>31834499
>It's not that great of a gun
can be said for all your guns lmao
>>31834482
Sup senpai.
>>31834336
>>31834311
>>31834292
Figured you'd like to see progress
>>31834499
>>31834480
Though it's a lot of fun when it works good
>>31834499
the p22 has ruined my opinion of walther for the rest of eternity
i can not look at a ppq and not see that disgusting pot metal piece of fucking turboshit
>>31834505
Ikft
>>31834506
Ok noguns
>>31834513
The m16 clone I have that's colt/umarex/Walther is just as bad
>>31834507
>your gun
>working
habbening
https://www.youtube.com/watch?v=tqPxUbOwAw4
>>31834522
i know
all of the german made 22s are garbage
why didn't i get an SR22
>>31834536
At least they work sometimes
>>31834542
>>31834536
Both the m16 and the p22 like cci
They are fun when they work and pretty accurate actually
But they don't work well enough
>>31834522
>Ok noguns
:^
Where were you when Trump won and pmags went down to $5
>>31834572
>where were you when trump was kill
>>31834469
NY north or east of Albany
>>31834532
I both love and hate Kimdotcom, but I think he knows he's on a hit list.
>>31834532
and apparently hildog was sexting weiner?
top kek
>>31834567
>welfare mags
>>31834567
Aw copying his hero mil surp dude
Also
>Posts pictures of magazines
>"It means I have guns :^"
Should probs kill ur self
>>31834567
>He bought the HI point pistol of AR mags
>>31834630
No one likes you or nigger dogs
>>31834688
anon pls
>>31834735
You're like the Hillary Clinton of /arg/
>>31834793
no that's fluffer
If you only had one basic bitch M4gery (it's a PSA mid, but has their CHF chrome-lined barrel made by FN) and a fixed amount of money to spend before the election, would you rather:
>a) Upgrade your basic bitch AR with a nice Geissele free float handguard, trigger and charging handle, or...
>b) buy a second, possibly even more basic bitch M4gery from PSA or some other budget manufacturer before they become scarce/expensive?
I am thinking that prices will go up on guns and uppers very soon here, but stuff like good ff handguards and accessories could be out of stock for a long time too, once the panic buying starts. Also, how are Hardened Arms' barrels and complete uppers?
WE WUZ
>>31834901
buy a fuck ton of magazines
>>31834960
A pile of shit
>>31834968
I have plenty of magazines to last me through a long Middle-Earth style winter. Just trying to focus on whether I want a second rifle right now or to upgrade my current one.
I picked up my complete lower today. I've never put an AR together before, what are some good resources I should look into before buying upper parts?
>>31835012
say that to my face not online
my rifle was forged by shitposters
where did MSD go
>>31834507
Looks good desu
When are you gonna get that 80% done? :^)
I'm kinda considering getting a /k/ube 80% from KS.
>>31835044
No you're too ugly I'll turn to stone
what's this
>>31835059
Something from a fag named Gabriel
>>31835089
she was a very polite southern lady
>>31835099
a little late to the party
>>31835117
no bully
>>31835124
amber chevron?
>>31835124
put it on gun
>>31835117
>his mom bought him a used Acog
>>31835167
gbp are hard to earn
MBT finaly
>>31835193
Now go buy a good trigger
>>31835210
Like the SSA I have in the M4?
>>31835219
Ignore the poorfags who can't afford more than 1 trigger
>>31835132
red chev
>>31835143
ok
>>31835293
8/10 desu
R8 my 22
Just ordered an oil filter adaptor for easy cleaning >:DDD
>>31835317
typos are the worst, im sure you meant 10/10
>>31835045
Sooner rather than later desu
black sopmod-e on the way.
haven't decided on a replacement for the mvg yet
>>31835338
r8 with sopmod
>>31835398
mvg is fine. what kind of accuracy are you squeezing out with that accupower btw
>>31835413
9/10 when you get a light mount
>>31835426
arisaka ya think? I'll order something rn
>>31835434
yes
get a grip too
>>31835434
arisaka inline or kys. order off amazon and the vendor sends you a free credit card tool thing
>>31835445
>inb4 he puts foregrips on the sides of his wheelchair wheels for tactical rolling capability
>>31835445
>get a grip too
uhh i have a grip
>>31835454
ok
>>31834311
fucking commie limey ass nigger faggot milk drinker
>>31835454
>not eligible for prime
f
is the trijicon accupower 1x4 a true 1x? idk if i should get that or a msi 1070. not like ill be using both all the time.
>>31835468
>i have a grip
The A1 makes the rifle look bad
>>31835484
Yea, i's really close to 1x
>>31835482
it still shipped p quick
>>31835484
it's pretty close to true 1x, but I'm not the type to get booty blasted about that sort of thing
>>31835484
Taytay a gross
>>31835506
i have a magpul but its painted
>>31835507
im going to order from WO, i want a sticker
>>31835515
what grips have you tried so far?
>>31835521
a1/2, a few magpul, bcm
>>31835358
aw yis
Bring on the ghost gun
>>31835484
Absolute 1x
>>31835528
The piece of plastic holding the grip plug on my BCM grip broke in the safe when another rifle must have bumped it. Kind of pissed about it actually.
>>31835568
i think they are ugly, i used it on someone elses rifle.
>>31835579
I'm probably going to replace it with another MIAD 2bh
>>31835585
>MIAD
maybe ill pick one up too
a1 is comfy tho
>>31834688
Nig dogs are ok.
>>31835591
I haven't tried an A1, the A2 is too slim for my hands.
The MIAD has been my favorite the first one I tried after the A2. I've tried the B5 P-Grip, and the BCM Mod 3 and I think the MIAD has been my favorite with a medium backstrap and no finger shelf.
>>31835602
>the A2 is too slim for my hands.
a1 is kinda slim too, ya probably wouldnt like it
So, I found out about a local guy who's doing custom ARs for fair prices, and I want to get one before word gets around and he can hike prices.
What parts should I consider putting in? It's tempting to go full gear queer, but I want to keep myself under 800 bucks.
>>31835625
Why not just build one yourself?
>>31835638
I'm not /k/ enough
>>31835617
I'd say try the MIAD with no finger shelf and the small backstrap.
I'm about to order one but can't decide if I just want black again or FDE to match mags, acog, and warden
>>31835628
larue or ba barrel- $250
handguard of your choice- $200
aero upper- $100
mbus pro set- $165
a2 birdcage- $8
>>31835668
You don't have to be /k/ to build
Shit, you can 'build' by putting a complete upper and lower together
>>31835668
Then get out.
Just bought this complete lower receiver from PSA
http://palmettostatearmory.com/psa-ar-15-complete-lower-magpul-ctr-black-blem.html
What should I look at getting for the upper? I've got about 800 to spend. Looking for an A3 style with 16 inch barrel with a forward grip and maybe some optics down the road.
>>31835668
What does this even mean? It's easy as fuck, just go watch some youtube videos.
>>31835673
MIAD with no shelf or beavertail is GOAT.
>>31835673
will do
>>31835680
>A3
Why?
>>31835699
>aero upper
Why not? What would you suggest?
How gay would I be if I built a retroish build using an a2 upper? I've got an a2 upper and it's either this or building a M4 clone
>>31835734
sell the a2 upper
Anybody know anything about P&S rails?
This listing says it's the same as a KAC M5 but with different engravings.
Would it be clone correct?
http://www.ebay.com/itm/122198281113?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
>>31835625
Oh anon
>>31835692
>>31835695
What color MIAD should I get, FDE or just stick with black?
how the fuck does he know all this shit so far in advance? he knew Brussels was gonna get btfo, more terrorist attacks at home, obamacare failing, brexit, failure in the middle east etc. crazy election.
>>31835773
eh, I'd probably go black
Paint it FDE if you want to
>>31835773
black desu
get a black gas tube too
>>31835775
hes playing 3d chess
>>31835783
Eventually I plan on painting the whole thing once I get a 14.5" barrel and QD end plate
>>31835685
I'm lazy.
>>31835810
no, you're a fucking idiot
>>31835798
>get a black gas tube too
kek is there a gucci gas tube
>>31835823
probably one with a meme coating, i only say because its really shiny in that pic
>>31835826
Black would be a nice touch, I've already put a V7 mag release and V7 FA on it so why not?
>>31835818
I don't get why you're upset. I don't know how to build an AR, I don't want to put in the time to build an AR, and unless I can do it for a literal fraction of the cost, it's worth paying someone else to assemble it. It does not affect you in any manner.
>>31835838
exactly. if you are going to paint it i wouldnt worry about it.
>>31835839
>unless I can do it for a literal fraction of the cost
you will save what you would be paying someone to build it. paying someone to build an AR is pure retardation
>>31835839
At your budget building won't really save much
Order a blem lower and premium upper from PSA and roll with that
>>31835839
It's fun.
I didn't know how to build an AR until I watched youtube videos and did it myself. Seriously, you're what's wrong with our generation. Do you pay people to do everything for you?
All it takes is a little bit of time and effort and you'll have the satisfaction of completing a project yourself and you'll appreciate it that much more on top of the fact that you'll already know how to assemble it when you later decide that you want to swap out parts.
>>31835860
this. do people not like to tinker anymore? its fun to build from scratch, you get to know exactly hwo everything works.
>>31835839
You're poor and stupid, I call it like I see it. You want to throw money but not effort at your hobbies, maybe you should take up collecting figurines. You could pay for someone to unbox them for you
>>31835876
>do people not like to tinker anymore?
millennials
>>31834901
Anybody else want to weigh in on this?
>>31835894
id buy another lower and ammo
Well it's been about three days now. Aero Precision has yet to tell me anything since asking for pictures of the damaged nut. I don't really feel like I'm asking for a whole lot here, it was only like $80. I would just buy another one and return the broken one by packaging it back up in the second one's box, but I feel like getting a refund would take even longer
>>31835860
>I didn't know how to build an AR until I watched youtube videos and did it myself
>All it takes is a little bit of time and effort and you'll have the satisfaction of completing a project yourself and you'll appreciate it that much more on top of the fact that you'll already know how to assemble it when you later decide that you want to swap out parts.
I'll look into some tutorials.
>Seriously, you're what's wrong with our generation. Do you pay people to do everything for you?
No, but I do enjoy throwing money at people who make stupid assumptions about me based on one aspect.
>>31835894
I'd get a lower and mags/ ammo now
It's always gonna be a carbine length gas, I don't really see why would you go beyond a KAC RAS honestly
>>31835904
bro, I told you about Aero's customer ""service""
PROTIP: go bitch about it on r/ar15 where the one actually ass-kissing Aero rep hangs out and watch it get fixed within 48 hours
>>31835904
aero CS is abysmal, email this guy:
[email protected]
or use this one:
[email protected]
might respond quicker
What's the rationale for having a buttstock that can snag on shit? I understand these are effective buttstocks for actual use, but I have trouble getting past the major design flaw staring me in the face.
>>31835904
Where is the damaged part here?
>>31835913
>>31835899
Thanks. I picked up three more lowers just for the fuck of it.
>>31836005
I was going to buy one of these but I was at my lgs yesterday and the manager talked me out of it cus it always snags on shit
>>31836005
It's kightweight
They make one with paracord on it
I personally haven't had one on my rifles, I prefer sopmods
>>31836005
it doesn't fucking snag on shit
any retard telling you that hasn't used it
>>31836038
*deposits $0.03*
>>31836044
shut the fuck you sub human fucking retard.
I really like the a2 stock also, super comfy
>>31836046
Thank you for Correcting the Record.
>>31836038
What, you mean you AREN'T supposed to wave the stock of your rifle around like a giant aluminum ice pick?
>>31836038
>any retard telling you that hasn't used it
>implying you actually "use" your guns"
topkek
>>31836046
never before has a keymod master racer been so wrong
>>31836005
idk but it sure is ugly
>>31836038
I have one and it literally snagged on my skin just now. QD BTFO.
>>31836054
i mean you can
you can probably use it to climb shit
>>31836070
i don't have anything with keymod anymore you fucking stupid cunt.
>>31836080
your life sounds so sad
>>31836080
sell the urx?
>>31836083
oh yeah sure
it's fucking terrible.
had a stuck casing in my ar the other day
guess it's time to clean/lube
only 400 rounds, makes me sad :(
>>31836090
no
it's in a box with the other stuff not on any rifle
i don't feel like listing it on ebay
>>31836108
what did you replace it with?
>>31836093
>some blue collar job
>posts on 4chan all day
>apparently plays games with a goatfucking aspie
>>31836013
The front thumb nut thing stripped itself out. It will tighten to a point and then just won't grip anymore. I haven't even shot my AR with the handle attached.
>>31836099
were you the one that made that thread about it
>>31836108
>list something for say, $500
>you have received an offer
>turdgobbler offered $200
>decline
>turdgobbler offered $208
>decline
>turdgobbler offered $225 with comment
>hurr u kno you can get these for like $600 new?????
yeah iktf
>>31836080
>you can probably use it to climb shit
Maybe if they had used one of these stocks in that Pixar short film, then the dad wouldn't have died like a bitch.
https://youtu.be/h8O0LpubhUU?t=2m42s
I FIXED MY KAK BRACE
maybe
long term testing required
>>31836108
Hey bb do you have a shitty 16" barrel you don't want?
I wanna build an upper for running blanks
>>31836125
>blue collar jobs can't make a lot of money
not even gueerfag but cmon
>>31836137
forgot picture
>>31836130
>stripped itself
You mean *you stripped it.
>>31836132
no, I think I posted in another about it though
it's funny how AR people always say it's not that much less reliable, when it is
That's with just spraying CLP in there, no other lube or cleaning than that
>>31836132
Or
>list something for $100
>it gets a bid, looks like it will sell
>a day before the auction ends, the faggot bidder messages you
>hi can you cancel my bid, kthxbye
>tell him "tough shit"
>his next message is a four paragraph essay where he threatens to leave negative feedback on your account, report you to ebay, and send you envelopes full of glitter
Fuck this shit.
>>31836153
maybe ur AR is just shit
http://www.thefirearmblog.com/blog/2010/06/09/a-clean-wouldnt-hurt/
>>31836119
the SMR MK1 with 11.5'' barrel
>>31836125
oh yeah i must be so poor
>>31836137
hell yeah i fucking do
it's got dank flutes on it
>>31836172
How much would you let it go for?
I'm trying to make this a cheap beater upper that I don't have to give a shit about
>>31836167
lol
I have arguably one of the best ars on the market
still though, mortaring it is annoying as fuck
>>31836180
post AR
>>31836172
nice
>>31836189
>>31836176
$80
you can see it here on this old abortion
>>31835556
Is that stock adjustable for length?
>>31836196
>been posting the same shitty pic for months
>has only shot 400 rounds
kys idiot
What's your guys' recommendation on tools for building an AR?
>>31836209
been busy
I have two ars, I don't shoot the sr-15 as much
I kind want to trade it for a scar
don't really care about photos as much as you, but ill take your advice
>>31836212
I mean prior to tightening it down. You can see in the picture that he has it away from the castle nut.
>>31836225
no, he probably modified it
>tfw you take your tripcode off to reply to yourself as an anon
Geissele sale at PA.
we super semi now.
>>31836224
Why don't you like the SR-15?
@31836239
>he can't get (you)s
kek
>>31836239
I do this every time I post my sr-15
Bought my first AR
>>31836239
>tfw you put on a tripcode to reply to yourself, but have to shitpost for three years afterwards so no one gets suspicious
>>31836258
apply trash can and try again
>>31836217
If you're buying an assembled upper you can get by with a punch set, pliers, castle nut wrench and household tools. If you're installing the barrel yourself then add a vice, barrel vice block, and a barrel nut wrench.
>>31836005
have one, have never had a snag.
the qd location is shit, but snagging really isn't an issue.
>>31834238
>tfw mega arms receiver fit sucks
>>31836324
looks fine you cuck
I'm planning to buy a PSD lower parts kit this weekend for my first AR. Is this a good choice?
>>31836324
It's almost like boutique brands charge 300% more for the name alone
>>31834238
So I want an 80% AR lower that is sized properly to mill it to fit without any play to my upper.
Which one am I looking for? The front pivot pin hole is kind of a big deal in this case.
>>31836338
I meant PSA
>>31836346
I mean, I guess if the top of the receiver needed like 10 thou taken off it would be perfect.
>>31836353
they are fine, I have a lower and it works fine
What's the perfect beginner AR15 for noob that is also a poor fag? Need to buy one before Hilldawg wins by a land slide, because cucks are everywhere.
>>31836332
I had to hammer it in place ya faggot
>>31836341
you really think that someone would triple the price of a lower and only change the rollmark?
gosh, you'd have to be a real faggot to fall for that.
>>31836201
Maybe
We'll see if I don't find anything that works better for the blank upper/ if I buy that ishapore tomorrow and I'll let you know bb
>tfw fired/layed off
>>31836393
m&p 15 2
>>31836394
Hammer what? You don't even have pins in it
>>31836394
mine was an extraordinarily tight fit as well
>>31836338
>>31836353
I got the PSA kit with the plated trigger/ hammer and it's great for the price. Everything else was standard base quality parts, except the safety had a little ridge on one end of the valley between where the detent rests that I had to file down because it was sticking.
>>31836393
Colt 6920 LE
>>31836093
>literally too poor to afford a 30rd clip and enough ammo to fill it
lol yeah i'm sure your life is great
>>31836403
Please, do explain to me how a Mega lower is functionally different than an $80 spikes lower. I'll wait.
>>31836416
you going to do it now
so we can be rid of your blogposting shit
>>31836421
Exactly
>>31836416
was it because you can't spell?
>>31836458
what a faggot
post rest of pic or are you scared?
>>31836458
Yeah
>>31836463
Long, long, long story i wont post here
>>31836460
exactly what? Looks like a matched set
>>31836143
I mean, if those kind of nuts aren't supposed to be tightened by hand, then yeah I stripped it.
How are you supposed to tighten them?
>>31836466
ask him
Alright guys I'm sorry, that AR15 isn't even mine I own an AK
>>31836493
who is he?
>>31836522
>!!
>>31836475
No pins and it is stuck together. Nigger I know you are fucking stupid, but goddammit I didn't realize how stupid you are
>>31834469
check target or hi power barrels
>>31836454
>>31836454
>>31836551
sounds like a quality matched set
>>31836551
apply mallet
a sticky fit will fix itself eventually
the anodizing will wear
>>31836562
>>31834589
I hate her name hildog, it makes her sound like such a gigantic faggot. Her face and voice are pretty terrible on the senses too.
>>31835678
I know a guy that doesn't know one tool from another. His wife can work on cars , he can't even put a fire out.
Could a Decent ar be built for $600?
>>31836641
yes
get an anderson lower and a basic lpk with an a2 and get the PSA or another brand similar
>>31835747
Mayonaise is the same as Miracle Whip except for the wrapper on the jar.
Got this today as Hillary Insurance. Can I hang out with you guys now?
>Hillary likely to win
>buy expensive top-tier receiver
>immediately afterwards FBI reopens investigation, Hillary likely to lose
Oh well I got a sexy lower and Trump will win. Fine with me.
>>31836324
did you get the matching models? There is an H and an S model.
>>31836588
>having four doggos
truly an inspiration
>>31835860
To some people it's demeaning for them to have to do manual labor. And I'm not him, I just see his type a lot. They try to make friends with me so they can try to get me to fix their shit.
what up you dips
Which stock is most aesthetically pleasing?
>>31835912
>I'll look into some tutorials.
The videos at Midwayusa.com are priceless. Bear in mind you don't actually need all the tools Larry's using -- just the receiver block, a torque wrench, hole pin punch set, etc. But do get the little tube of grease and lube the hell out of everything. It helps immeasurably.
A computer or car can be a black box. But not a gun. You should understand that bastard inside and out.
>>31836705
This one.
>>31836705
mft master race
>>31836705
Where'd you get your quad rail from, the dolar store?
Hey guise.
Remember when I talked about the freaking sandniggers burning shit up and all ?
They tried to jump me tonight. I was with my doggo.
>>31836748
it's like your had a sopmod buttstock, it was bitten by a retarded radioactive spider, and mutated into that
>>31836777
You and your battle buddy okay?
Where the hell in France are you? Are the bastards EVERYWHERE now? I thought it was only bad in Calais, Marseillaise, and the banlieus in Paris.
>>31836748
still posting your ugly ass AR i see
>>31836394
You should check the well that the rear takedown boss enters, I've seen sme that the radius on the back doesn't match properly with the boss in the upper, you'll see the drag marks on the boss, just file it a little bit to match them up.
>>31836641
>Could a Decent ar be built for $600?
$300 for upper, bcg and ch
http://palmettostatearmory.com/psa-16-midlength-5-56-nato-1-7-melonite-freedom-upper-with-bcg-and-ch.html
$200 for complete lower (but they were on sale for $160 last week and I've seen them selling for as low as $130, so wait a few days and the price will probably fluctuate)
http://palmettostatearmory.com/psa-ar-15-complete-blem-lower-classic-edition-no-magazine.html
$50 rear sight
http://palmettostatearmory.com/magpul-mbus-back-up-sight-gen-2-rear-mag248.html
$10 magazine
http://palmettostatearmory.com/d-h-5-56-30rd-aluminum-magazine-8416.html
Total: $560 + shipping and the transfer fee for your lower. I don't know why Palmetto doesn't sell a complete rifle for this price, all their complete rifles of even the same quality are $700.
For example, this is basically the same rifle: http://palmettostatearmory.com/psa-16-m4-moe-freedom-rifle.html
The Magpul furniture might add maybe $40 overall to the cost, but it's lacking a front sight, so it shouldn't be that expensive.
>>31836705
None of those are sexy enough. Am I the only fan of BCM Gunfighter stocks in these threads?
>>31836472
Post it. Your pathetic life always makes me feel good.
>>31836827
Yes
>>31836795
I'm okay. One very light black eye, three cuts to the left arm I protected myself with, also light because, hey, I'm not a freaking victim.
Battle buddy is very much okay, he was very much happy to see some action.
Bastards are everywhere. They burned Calais' jungle and spreaded the others everywhere.
Though the ones that jumped me are young and "french". They just yelled "allah akbar" to our Sentinelle patrol this afternoon. They are teenagers for some of them, in their 20s for the most.
Now, the only thing is that I can get fucked in the ass by french "justice" because I defended myself and muh doggo bite one motherfucker.
You never win in France...
>>31836827
God dammit, 4chan. This was the picture I intended to post before the file got swapped. I'm guessing that there is now a picture of a BCM stock floating around /his/ or some autistic board.
>>31836846
defensive options in FR?
noguns obvs, but knives? bear spray? dragon dildos?
>>31836846
Did you use any weapons? What kind of dog do you have?
>>31836841
Why don't you like them? They're solid as fuck, intuitive to operate and don't have any sharp angles protruding to get snagged on shit.
>>31835894
Hardened arms gtg
>>31836867
they are fuck ugly
>>31836795
Remember when french authorities tore down that tent city in calais earlier this week? The shitheads that were living there were disbursed into other towns in france. 8000 of them.
>>31834238
THA WAISIS, IT IS WITE SIRPWEMICY SIMBL
>Picture not related
>decide to put tile above shower
>need 12 pieces
>count 12 pieces
>after installing 6 and zero mistakes, there are 3pcs left
fuck, i sure hope i can find the same tile, neither home depot nor lowes have them.
>>31836868
Do they have different classes of barrels I should look out for, like Palmetto has the bottom-of-the-barrel PTAC line, or are they all g2g?
>>31836867
disregard anything >>31836874 says.
he's a big league fag.
>>31836874
They have about the same side profile as a standard M4 buttstock. It's a more snag-free design, but I am not seeing how you find them to be so radically different from the norm.
>>31836856
Spray, but hey, even with that, if you're not a gurl, you can get fucked by justice.
>>31836866
I used my gorilla warfare training to punch my way through that. More seriously, I didn't use any weapons.
My pupper is a german shep. Pic related. 10 years, but still going strong. I honestly didn't think he would go to it that fast at his age.
>>31836887
nice blog post fluffy
>>31836874
What a coincidence, so are you!
>>31834505
What is this pls
>>31836893
>big league fag
what did he mean by this
>>31836907
You have no sense of aesthetics
>>31836887
What rail is that?
>>31836931
its a compliment, obviously
>>31836931
Illustrate your "sense of aesthetics" by naming a buttstock you think looks better.
>>31836937
I guess so. You must be a fellow big leaguer
>>31836939
SOPMOD
>>31836956
my post count isnt high enough for minimum criteria
>>31836956
>He didn't get the LMT
>>31836767
From YHM like 4 years ago. I pinned and welded the barrel so it isn't changing any time soon...
>>31836962
>he thinks having a LMT makes you better
>>31836956
>falling for the SOPMOD meme
wew lad
>>31836961
oh right, what's the requirement 15k?
>>31836956
It looks practically the same from the side, except for the adjustment lever that can snag. If you had said MFT or something radically different visually, I might at least be able to respect your opinion.
>>31836875
Naive question of the day? Why weren't they deported?
>>31837009
I don't know, maybe French Dude (based) does.
>>31836974
Around here it does
>>31834505
>>31834522
Hey, im trying to find an ALG handguard that fits the DPMS thread pattern for a .308. On mobile i can't find any legible info on that.
Any suggestions?
>>31837082
http://www.guntecusa.com/index.php?route=product/product&path=91_95&product_id=892
>>31836240
I know that feel.
>>31836812
What is labor?
>>31837310
- i have the high profile upper, so i guess it'll have to be an aero handguard or something modular/tubular
Thanks for the suggestions
>>31837366
free, unless you're one of those dainty faggots that demand other people do shit for you
>>31836740
>The videos at Midwayusa.com are priceless
Thanks, man. I'll check those out.
>Bear in mind you don't actually need all the tools Larry's using -- just the receiver block, a torque wrench, hole pin punch set, etc. But do get the little tube of grease and lube the hell out of everything. It helps immeasurably.
Good to know.
>A computer or car can be a black box. But not a gun. You should understand that bastard inside and out.
Fair point. I've taken apart some of my other firearms, going a few steps further would be more beneficial.
>>31837770
AR's are stupid simple man. you can learn every part and how to detail strip in less than 15 min.
>>31834811
What are these mats and where can I get one?
>>31836847
Do photos actually get swapped?
>>31836887
Seriously <3 you mwah