Too lazy to link old thread edition.
Keep strictly real-steel topics in >>>/k/ , gun and gear porn's cool as long as you don't spam.
>Newbie pastebin
http://pastebin.com/WQtUgznd
>/asg/ retailer guide
http://pastebin.com/YHNFKKt6
>Maintenance 101
faggot who made it chimped out. open for takers.
>International and local laws concerning Airsoft, things to consider while traveling
https://docs.google.com/document/d/1eVw8H56iR_jpo-slgO5e8KNlLvQIAj1yQ9V8rrF6jWo/edit?usp=sharing
>/asp/ergers with Airsoft guns - Skype group
Group link is dead again. Respond to OP with your skype name to get added.
So I took apart my JG AK to address a trigger skip.
Now it's not even firing.
Fuck.
My field allows trip mines, booby traps and other force multipliers(no punji pits). Other than Claymores and Thunder B trips, does anyone know of any products or rigs I can use to kill my fellow man?
Hi guy a friend ask me about what replic he should buy under 200€.
He don't want an ak or a g36.
I advise him to buy a cm16 but have you some other proposistions ?
Airsoft technician of 3 years here working for a large field in the southwest. AMA? Im bored at uni.
>>753299
Post here it's too early for another /asg/ thread
>>>749629
>>753310
The current thread didn't show up when I looked in the catalog, so this thread's a bit of a mistake.
>>753340
>>>>/asp/asg
For your troubles, don't fuck up next time you lazy ass faggot piece of shit.
>>752659
American airsofter here, are those "international" laws just for Germany or pretty much all European countries?
>>753579
Y-you too
>>753967
Bump what? Use the other thread
>>753971
Current thread is at bump limit, it'll be archived soon.
Any UK fags after gear? UKTactical is doing 20% off of Warrior stuff till next week.
are E&L now the best AK manufacturers?
http://www.emei-landarms.com/m/index.asp
I have heard good things about their products
>>754004
E&L produces the best AKs right now, externally and internally. LCT has moved towards the snowflake market.
>>754043
>ironically, western tacticool snowflake weaonry has become the cheesy mainstream garbage of airsoft
>an artisan Kalashnikov-centered producer outclasses competition
can this contemporary sport get any more dank?
>>754082
It didn't outclass LCT, LCT simply moved towards the modern russian stuff, SR3M, VAL, Vityaz...
I love how you guys hate what's mainstream, if AKs and Gorkas were mainstream you would be wearing multiglam and all that stuff, admit it /asg/ you are the hipsters of airsoft.
>>754265
>I love how you guys hate what's mainstream
polartards sure are mainstream
>tfw no one wants to do UN kits because the blue helmets aren't tacticool enough
fuck this gay sport
>>754633
I don't want a UN kit because I want to dress up like a relevant soldier.
>>754265
I would hardly call slavshit "underground". It's the second biggest thing, under you standard NATO stuff.
>>754657
Well depending on what you call "standard NATO", there really isn't much else, other than like, Israeli gear, and I mean, who wants to be a jew?
>>754664
there is an IDF inspired team, it's pretty cool
but yeah
kits I see the most:
1. Generic airsoft gear thrown together (FAST helmet, multicam clothing, platecarrier, M4)
2. NATO
3. Russian
Who /airsoftgearasahalloweencostume/ here?
>>754706
I do.
Also I apparently decided to roll my ankle at the field today its pretty swollen.
How pissed off would a GMR wannabe operator be, if I shot them with a nerf gun? On a scale of 1 to 10?
>>754737
>Not getting bang-out kills with a banana
>>754739
I would love to see that
>>754737
why do you assume one would get angry
>>754633
Not a sport
>>754737
>DUDE YOU CANT USE THAT
>why?
>BECAUSE REAL OPERATORS DON'T USE NERF
It would go on those lines
>>754766
it is a recognized sport in my country so suck it
>>754737
GMR frequent my local field. They're actually pretty chill guys, though Ronin can be a bit aggressive at times.
>>754631
>>754948
That's pretty cool. Aren't they into hipster camos now?
>>754977
Pretty sure, yeah.
>>754977
Yeah, they rock a bunch of pretty obscure camos, including the Night parka master race.
Post your bbgrail.
>>755013
>>754912
your country is dumb
>>755023
I don't decide where the topic goes.
>>755027
is this the same person I have to deal with on the enemy team who gets hit in the face and doesn't call their hits?
>>755020
Is this any good? worth importing?
>>755031
wtf are you on about?
>>755044
because you're pretty fucking stupid
>>755013
>>755042
Well it doesn't actually shoot so no.
It's a model gun.
>>755065
>>755065
http://www.merriam-webster.com/dictionary/sport
>: a contest or game in which people do certain physical activities according to a specific set of rules and compete against each other
>: a physical activity (such as hunting, fishing, running, swimming, etc.) that is done for enjoyment
>>755072
>specific set of rules
>airsoft
>>755075
Your field doesn't have rules?
>>755076
its not that same as yours, or the next, or the one after that. Who provides a reasonable enforcement of those rules? Airsoft is a hobby you do with friends, much like a LARP. Its a game for sure, not a sport.
>>755076
>replying
>>755082
how is it not a sport?
football is a game
>>755099
What he means is that there is not a uniform set of rules like a more established sport.
>>755100
I can think of no less than four different games calling themselves football.
No uniform rules there. And hell, what you play on the school field and what you watch on TV are only superficially similar anyway.
>>755099
Is Tag or Hide-and-Seek a sport? Sure fits the definition, but do you see a sport there?
>>755105
chess is a sport
>>755106
stop replying to him
>>755072
Masturbation is a sport
>>755132
Damn right.
>>755106
>specific set of rules
>>755134
What isn't a sport?
>>755136
Does chess not have a specific set of rules?
>>755139
Besides the high price (but really, how much more would it be?), what are the drawbacks to owning a GBB rifle?
>>755193
More maintenance, most mags have 1/3 the capacity as the average midcap, firing too fast or on full auto can cause cooldown and decrease performance momentarily, parts tend to wear out faster than AEGs, and buying gas is an extra expense.
>>755193
You're going to be paying lods more ($30-60 per mag versus $5-10) for mags, magazines have a capacity of ~30 rounds and are a pain to reload in the field, have to deal with mechanical issues and wear, maintenance frequency is on par with actual firearms (Could be good or bad, take it how you want to), not as effective in winter weather and more Northern areas (CO2 alleviates this problem, but is more expensive), and magazines cooling down from sustained fire can cause multiple things like a sluggish bolt or low FPS.
They're still fun as shit and in all honesty I prefer working on GBBs than I do AEGs.
>>755198
Also keep in mind that not every GBB will have these problems, or will have them in different magnitudes.
My M14 can dump a fully charged magazine's worth of gas before any noticeable cool down effects, but it's made by WE so every key part is cast pot metal instead of milled/forged steel.
>>752659
How is this?
https://chicago.craigslist.org/nwi/tag/5291701616.html
>>755210
>Same guy was selling mp5 as G&G when in fact it was CA.
Nope, Shady as fuck.
>>755213
Not to mention that SRC is shit either way.
>>755186
Do you dress up in full Guard gear? Because if so, 10/10 would die for the Emperor with.
Just bought a classic army bushmaster predator for 60 dollars. Hope its worth it.
>these are the kind of shitheads you have to play with and against
why even bother
>>755269
>all those dye i4
speedball as fuck, wouldn't play with / 10
>>755269
Tell me about them. Why do they wear the masks?
which one
and why /asg/?
>>755186
>mfw
Guize i've just purchased a Amoeba M009 (in two tone blue because britfuckistan) as i cant be bothered buying parts for my never ending M4 and i just want to play army men. Anyone used the ares amoeba before?
>>755325
They are insanely popular at my site. The sales guy cannot keep them in stock.
You might struggle to find a decent capacity battery that actually fits in it, but other than that they're damn good raifus. My brother has the AM-014, two mates have the 13, and one has the 002 CCR thing.
>>755285
https://www.reddit.com/r/airsoft/comments/3r6b9h/hsp_fam/
They wear those masks to protect their identities
Anybody seen good custom paintjobs on any LMGs?
I've got an oldschool M60 (mostly steel construction) and the shitty paintjob is flaking. Gonna strip all of the metal parts and use a rust resistant paint.
I've been digging some of the high visibility paintjobs going around, but I'm on the fence about a lot of things.
Was thinking about using pic related as inspiration.
>>755307
his one
>>755365
multicam it m8
>>752659
hmu op
skype: galacticdumptruck
>>755412
Wait what?
>>755463
LCT or gtfo
>>755465
Oh, you mean this one?
>>755476
why did they fuck up the VSS so bad but not the AS?
Any of you g/asg/uzzlers from the Okanagan?
:hopeful:
>>755514
Why do you cry about it every thread?
>>755935
it's just what I do
you have a PSO for it?
>>755537
what are those vehicles called again?
>>754265
>I love how you guys hate what's mainstream
Get this appletard logic out of here
Some people prefer slavshit
>>755365
Best custom paintjob is chipping from wear and use to be honest family
>>755993
But that doesn't sell for as much as a factory new one.
>>755992
Yeah I do prefer slavshit, but most arround hate Multicam because everybody wears it, therefore a hipster of airsoft.
>>755997
A custom paintjob further depreciates the value than wear. Only retards would pay more for a used gun with custom paint.
>>755977
Bad Investment Mobile
>>755992
Yeah I don't like mainstream, but not because I'm a contrarian, I mean use what you like. But, am I the only one who doesn't like the M4 because its not a comfortable weapon?
All the weight is in the front, so when you one- hand it for any reason its a pain in the wrist.
As far as Multi-cam goes, sure it works, but damn thats alot of money.
>>756007
I hate multicam because it's ugly.
>>756025
I got a pair of emerson g3 combat pants for like 60$.
>>755976
Well I'm glad you'll never get the better VSS or a VSS at all.
And no pso yet, just finished drolling the Wolverine Inferno engine in it.
>>755977
Haaglunds BV206
>>756047
what's the appeal of HPA? Just don't like gearboxes?
I was thinking of building a gearbox from scratch or switching to HPA if it's worth it
>>756062
Gone through pretty much everything but HPA, just doing it for fun and holy shit, no flying spring guides makes it real easy to close the gb hah.
>>756069
What the hell is that semen demon, and where do I get one?
>>755365
Dazzle camo anon
>>755027
You also dont decide if it is a sport or not :^)
Newbie here, would an 80 round midcap from matrix work with a JG aug?
>>755269
that kids reddit post was hilarious.
>i was at X field den i got kikd out
>it wusn't eben fair
it's hilarious that any of them would even attempt to convince anyone ever that they aren't cheating bonus balling fucksticks 100% of the time. I mean, at least own up to your shitheaddery if you're going to do it.
>>754986
GMR really do know gear/loadouts though. everything they do reflects function which is useful to emulate; i got one of their kydex nade holsters (for free) and they're really nice for fast access to tornados.
my ghetto 40mm standalone
found some more guys
>>756162
feast your eyes
>>756168
no fat guys in this one
>>756169
all these images are gr8 m8
>>756162
THANK YOU SITTING MAN
R8 pls
>>756208
Damn, the UBR looks nice on it. Overall, breddy gud.
>>756208
I've always wondered, how is that grip compared to a vertical one?
>>756219
I found myself always holding the magwell even if I had a vertical foregrip, this gives a similar feel to what I'm used to
All and all I'd prefer a hand stop kit but
Hand stop>afg>vertical foregrip
>>756225
>holding the magwell even if I had a vertical foregrip
I do that myself as well, and I keep wondering why the hell I even have a vertical grip on it.
Are the new APS Silver Edge Gearboxes any good? I've thought about getting the ASR 115 Spyder.
>>756227
Aps silver edge? Wouldn't know man, I've only fucked with ca, g2x, and vfc.
>>756118
Who does make that determination?
>>756162
I'm glad people are seeing the superiority of ATACs camo.
But come on, look at all that weight! I've lost 30 pounds over the past months and its become night and day as far as enjoying airsoft.
Am I fat anons? I'm probably fat.
>>756295
nah you're just a bit overweight
you're not fat desu
but c'mon get less overweight
then you could be just a bit overweight
and then you could just be weight
if you got rid of the T
that would be the right weigh to go
>>756299
fucking jew kike nigger chink gook jap cunt
hiroshima nagasakimoot fuckin changing
all the shit to DESU FUCKIN SON OF A TAIWANESE WHORE FUCK OFF BACK TO CHINKLAND QUIT YOUR WEEBLORD EDGE SHIT FUCKIN SQUINTFACED ILLITERATE INFORMATION SELLING ILLEGAL IMMIGRANT
anyone else hate this desu sempai shit from
that stupid fuck hirohito namamatototototo?
>>756300
Shit nigga you madder than an Argentinean who just found out he isn't white.
>>756304
Moar liek madder than an Argentinian in June 1982.
>>756314
>LAS MALVINAS ARGENTINAS!
https://www.youtube.com/watch?v=VKkcTpCur7g
>>756299
Thanks' I guess I have to cut out the fast food and soda
>>756316
>Be me
>Be stationed in Falklands as air defence.
>mfw only worked for 3 hours a day in winter because Argies had no night flight capability.
>>756317
If you only do that you'll already have 75% done. Just try to walk or exercise around 30-45min each day and that's it. Have a couple of pieces of fruit for breakfast, a good meal and try to have lighter foods for dinner. Avoid bread.
>>756295
not fat a bit overweight
might want to watch out though
>>756295
If you cut down on eating Fast Food and soda, you will find that when you do indulge in those things they will taste 10x better.
>>756321
Too much bread and you'll end up dead!
>>756163
That guy is actually pretty cute, and I'm not even into bears really.
If not multicam what other setups do you use?
I usually use pic related when not doing a Milsim
>>756359
AOR2
But I would love having some snowflake camo just for lols
someone did it
>>756370
>>756371
>>756374
Yeah pretty much. Custom built gun from 2 years ago
Do some digging and found a Russian AEG website http://npoaeg.ru
>>756355
That's gonna be hard, I work at a mall and I don't know how to cook.
>>756378
I hear they're actually pretty bad.
What is based short spring shotgun anons?
>>756385
Really? I need to do some more digging. They have a working SVU AEG that shoots at 400 fps.
>>756383
Canned food, fish and veggie. If you eat a burger, remove bread. Drink diet soda or better water. No French fried or sweer potato
I am thinking about buying this AK for $175 (picture) Thoughts? I am looking for a good AK (preferably CYMA with real wood) for around $200, any recommendations besides this one?
>>756446
woops, forgot link: http://www.evike.com/products/31375/ couldn't find it on airsoftGI
>>756366
plsdontflickthemagplsdontflickthemagplsdontflickthemag
>>756246
>Not upgrading a gearbox yourself.
Well, I'm completely new to Airsoft and I have no idea what I'm doing.
>>756450
Could you recommend a certain one? There are a lot of them in the 40 series.
>>756454
what type of look are you going for? i love my cyma ktr
>>756446
CM040, 045 or 048
>>756455
I am looking for a nice looking AK-47 with real wood and full metal. I want it to look like a traditional AK-47 with a working charging handle for cool factor. I really don't want an AKM, and that EBB AK-47 is the only one I can find that is actually an AK-47 and not an AKM.
>>756454
Any, just pick the one you like most because internally they are all the same.
>>756452
burn
>>756454
CM042 is what you're looking for.
>>756458
CM042, all the way.
>>756460
Holy shit Anon thank you so much. This is literally the EXACT thing I wanted.
>>756461
Thank you too Anon <3
>>756459
>mag flicking
REEEEEEEEEEEEEEEEEEEEEEEE
>>756452
of course he flicked the mag
>>756455
>CM040J
my nigga
>>756452
Wut?
>>756464
BUUUUUUUUUUUUUUUUURN
Hmm..
>>756473
!
>>756474
>>756477
>Krinkov MB on a CM040J
Why would you do that? get a SF MB556K or something
>>756479
Where did you get that adapter? We were designing one but gave up after someone mentioned they existed already
Anyone know any good RPK's?
>>756464
>>mag flicking
who cares
>>756487
What the fuck is this even about?
>>756487
Its operator as fuck, plus you look really cool and people think you are good
>>756485
lct, cyma
>>756491
thanks m8
>>756425
It's more or less that their qc on their more custom stuff that is somewhat inconsistent. The SVU is just a modified A&K(or cyma, can't remember) SVD so it's probably fine.
what chest rig should I get to run an MP7 loadout?
already have a plate carrier for heavier stuff/m4 stuff/etc, looking for something really light
>>756515
I suggest you shove them up your ass as you'll get pleasure from them seeing you run an MP7
>>756515
AEP or GBB?
Either way, you should be aiming for something close to half life 2 cosplay.
>>756532
put some magpuls on them in case they get stuck
>>756515
The Blue Force Gear Ten-speed MP7 chest rig would be perfect for what you want.
>>756477
>Not straight mags for that AKX-9 look
>>756357
Shit, look at that, it's Thursday.
so i picked up my m14 today
finally i can join the real fucking nato club
>>756627
No because it still shoots plastic 6mm bbs
>What's the funniest thing you heard during a game?
Last week my team and I got pinned down by a SAW gunner, and there was another group of guys not far from us stacking up not shooting. My friend yells out to them.
>HEY! I DIDN'T BRING KEEPADS TO GET FUCKED IN THE ASS!! MOVE IT UP!!
>>756638
My friends and I are the only ones who yell non-tactical shit at other players when we go to our usual field, because it's always filled with a bunch of socially awkward loners and/or groups of Asians who don't speak English.
Last week my buddy got pinned and yells at us about it.
>I NEED AN ADULT!
His brother is 16, and brought a friend about the same age and they both responded to him.
>Can't help you
>Not old enough
A few games later there was this 12-year-old on our team, sitting basically in spawn, and we tried to coax him into joining the fight.
>You roasting marshmallows over there?
>It's more fun when you pitch your tent with friends!
>>756640
>It's more fun when you pitch a tent with friends!
Gay erotic airsoft fanfiction when
Could use some help. Looking into getting a cheap chest rig/vest here in Europe. Which one of these two would you go for?
http://gunfire.pl/product-eng-1152207726-Commando-Chest-Tactical-Vest-Black.html
http://gunfire.pl/product-eng-1152207731-Chest-Rig-Strike-Tactical-Vest-Black.html
I'm using a CYMA cm045a (an AKS 74u) but I really have no problem with one vest being able to hold more AK mags than the other.
Also since I only use a MARPAT uniform at the moment, should I go for black or OD color, keeping in mind that any other pouches and belt will also be in that color.
>>756656
Get based AK chest rig.
http://www.flecktarn.co.uk/odtcr1nx.html
>>756657
Thing is we're doing a group order from gunfire and we're outside of the EU so we're shipping everything to a specific adress.. Otherwise I'd be all over milsurp for everything
>>756656
I suggest spending a bit more and getting the pantac one
http://gunfire.pl/product-eng-1152203638-AK-Chest-Rig-olive-drab.html
And if you are going for that one get it in tan it looks way better.
>>756125
Most mags are cross compatible. It should work unless the matrix uses a special snowflake mag.
>>756673
Thanks for the input, that looks pretty good. Gotta see how much I'll be spending since I'll buy other stuff. Also gotta match everything color-wise, don't wanna look like a clown
>>756691
Matrix is just a rebranding company. The matrix mags might even be JG mags themselves.
>>756627
What brand, my man?
>>755186
Brother!
>>756737
Have you killed any heretics today battle brother?
>>755186
How make this?
I want to do a full guard outfit now.
>>756789
It's basically a plastic box or shroud that fits over the g36, with screws going into the rail mount holes.
>>756566
perfect. thanks anon
why
>>756880
Some people just want to see the world burn.
>>752951
Bump.
Please someone help.
I've checked all the gears for broken teeth, as well as the piston assembly and tappet plate.
Everything is fine.
No noise when I pull the trigger.
Motor?
How do I troubleshoot that?
Any opinions on the Tippmann M4? I'm not even all that interested in HPA or M4s but the sheer practicality of it appeals to me.
>>756887
>>756894
>Motor?
>How do I troubleshoot that?
Pull out motor just enough so it doesn't connect to the rest of the gearbox, pull trigger to see if turns.
>>756896
Heh, my M4.
>tfw can't go airharding cause exam on Tuesday
>>757015
>TFW can't jihad infidels cause day of rest
#justisisthings
>>756894
check your trigger contacts. Make sure they're actually, y'know, completing the circuit.
If there's a fuse in your gun, check it.
>tfw
>>757129
This is why you never put short and tall people next to each other in photos.
I bought a pair of ESS vehicle ops off ebay and I was wondering how they compare to land ops, what're the differences?
>>757229
The foam around the frame (As in, not what's against your face but the strip that goes around the top, bottom, and sides) is closed cell instead of open cell to keep debris out while travelling in a vehicle. At worst it'll make them fog up a bit more but can always be removed.
>>757232
Oh, I figured it would be something like that, thanks!
>>757129
That's a nice cloak.
How many guns is too many guns? Also this counts for gear.
>>757324
how many have you got?
I've got 2 working ones which I take with me + 1 GBB I don't use
as for gear, only 1 LBV I use and take with me, 2 other (chest rig and pc) which I don't use
>>757355
I have my AEG, Tri shot shotgun and a gbb pistol. I would like to get more unique weapon systems but I just don't know where to put them or display.
>>757324
One type of gun per role, or impression. Having multiples of same era, same role guns is silly. How many mk18mod0's with rails, lights, PEQs and a paintjob do you need? But if you have a xm-177, m-653, black m4a1, AND a mk18mod0? That's a nice collection of ar-15 BBguns dude.
>>757324
There is no such thing as too many guns.
yo guys what's this camo called
>>757422
It's called Being an easy target in the forest
>>756721
CYMA, (maybe) unfortunately
>>757422
That looks like A-TACs LE
>>757422
That looks like A-FAGs LE
>>757422
IT CAN CAMOUFLAAAAAAAAAAGE
Actual question: I have a KWA km16, and I run it with mag midcaps and a 7.4 lipo. It has some feed issue, not mags, not hop up, and the air nozzle looks fine, any ideas?
>>757554
replace bucking?
>>757563
just replaced it
>>757567
hop up tuned down too much so it's blocking?
>>757572
like I said hop up is fine, only odd thing I would say is that im running .30's
>>757575
FPS and what bucking.
>>757559
How can regular marpat be effective in new Mexico Arizona and Nevada area?
Here's to you
>>>/k/27809384
>>756632
this desu senpai
>>757559
I honestly think Flecktarn or Partizan is more effective in the forests of Florida, and you'd be better off using something like Multicam Tropic in the swamps.
what do you guise think about a&k, a.c.m. , or kings arms manufacturers ? Did you have bad experience with any of them (their products) ?
>inb4 newfag
>>757404
I had 34 AEGs at my high point, hand full of gas guns.
>>757723
I have been using they Systema 2007 PTW clone and it works flawlessly once you upgrade the obvious parts (that you'd usually replace on a Systema anyway).
Their SR25 is also good once you upgrade it.
ACM is meh, KA has some good stuff and some lemons
Just built my first frankentorque
32TPA NIGAAAAAAAAAAAAAAAAAS
On an unrelated note, I'm running a battery that's giving me 150amps now (11.1 30c 5000mAh).
Do I need to upgrade my fuse considering it's specs are "250v 25amp"? Or can I get by with the 25amp?
>>755013
>>756167
that poor plate carrier
>>757802
At this point I believe it's called a girdle.
>>755013
>all these plebs only posting one gun
>these aren't even all of my guns
Post family pics
also sorry for sideways
to lazy to flip it
>>757129
bb shield cape
>>757800
The same AK, G&G AK104
Purchased October 13 2013, the gun has just recently hit it's two year mark
Between those two images there's been a lot of work, aside from clear external wear and modification the gun has undergone a ton of internal upgrades
>nukefet
>SHS aluminum o-ring nozzle
>Aluminum double o-ring cylinder head (and cylinderhead teflon mod)
>SHS 13:1 gears
>SHS aluminum sector gear delayer chip
>Shimming
>AOE
>nice big donger battery, as mentioned in other post 11.1 30c 5000mAh
>Frankentorque 32TPA (chaoli armature and ZCI ht neo motor can)
and I'll do the r-hop sometime next week, I wss putting off getting the silicone foam for the flat hop until just recent then left it in a friend's apartment.
With this set up I get instant crisp trigger response and my rps is around 25, before the frankentorque I was getting double shoting on semi and roflrps definitely above 30 and not enough to keep up with my cheap CYMA magazines.
>I'm leaving the blowback in
>I hope I can get a solid stock to house the battery but if not I'll have this ugly stock bag forever
>>757811
>cheap CYMA magazines
Cyma midcaps have always fed perfectly in my AK. At first I had SHS HS motor + 13:1 and now I'm running 28TPA motor and 16:1 DSG.
Yes, I know SHS HS motor + 13:1 was retarded.
>>757830
why HS and not HT on 13:1
>>757845
It was on sale and I was impulsive.
>>757830
Mine must just be old, I never leave rounds in them but I basically never clean them, maybe only twice since I got them at the start of 2014.
I've been to a few big games where I would have them loaded for hours without use and lots of smaller games where they're basically just being dumped and refilled every hour.
It could also be my hop up, I'm using a stock G&G metal one, anything special with your hop up? (by the way I'd really only start getting hiccups near the end of the magazine, in the last 30 rounds or so)
>>757857
Well that sounds lots like your magazines dying. I bought mine late in last year and I got other guns to play with as well so maybe you've just used them more. You could try stretching the springs and cleaning the grooves in them, but that's usually just a temporary solution. I wouldn't lube the magazines though. Changing your hop up chamber probably isn't going to change much.
I've been searching for a bit on where to buy a damn Glock 17.
I know there's the WE one, but I cant find any people that stock it that will ship to US. Anyone know a place to buy it or any other companies that make a Glock 17?
>>757803
And not even the sexy kind!
>>757865
check the buy/sale pages on facebook
Some days you feel like carrying on the global revolution of the proletariat.
Some days you just want to be pimpin'.
>>757863
Thanks, I might look in to it. I'm pretty much fine with feeding now though, and I think I'll be primarily moving in to a semi-only play style soon anyway.
Why would you be opposed to lubing them? The process I used was spraying some silicone spray where the bbs come out/are inserted then filling the magazine will old .12 grams a couple of times then discarding the .12's.
Aside from the r-hop, I'd like to eventually shorten my trigger pull but it seems like an expensive or very skilled process depending on which route you go down to do it.
>>757866
>we'll market slightly wider chest rigs as tactical girdles and make billions of Jew dollars
I'm planning on getting a Galil for reasons. Lack of aftermarket parts has made me put interest in DIY systems. Anyone have experience with drilling/gluing rails onto guns? How do you go about it without tearing the gun apart?
>>757880
The lube will end up in your hop and barrel and that's not something you want.
>Family photo?
Family photo
>>757914
>dat sexy G&P shotty
nice choice
>>757939
Pretty sure that's the CYMA one.
>>757940
really?Looks like the G&P to me
>>757943
This is the G&P.
Note that the receiver isn't as long as that Anon's.
>>757944
okay
I was not aware that the receivers weren't the same length
>>757939
It's a cyma anon, and to be honest I like it better than the g&p version because it's a trishot. If g&p made a trishot I would be on it like white on rice
I'd just like to inform you all that the entire V3 trigger mechanism is a cunt.
>>758079
>mfw pic related is not cross-brand compatible on the new CYMA gearboxes and I just need one for mine
>>758047
I don't understand why they refuse to make a tri shot. I guess that they don't want to infringe on TM's patents (like anyone else gives a damn).
>>758079
Honestly my only problem with teching v3. Otherwise it is bae
>>758080
>>758079
>Dealing with that hell of a trigger contact.
>>757865
Echigoya California will import one for you but thats almost $200 after shipping and taxes.
>>757881
The fuck? Galil has a railed version already.
>>758099
It took me an entire hour and some work with a knife to fit this bastard.
What's yours, some kind of mosfet thingy?
>>758103
Trigger Board for the Wolverine Inferno.
About to purchase KJ Works CO2 pistol from eHobbyAsia from clearance. How reputable is the KJ Works as a maker? Also, some KJW guns take both CO2 and Gas mags so does this mean it's okay to shoot with both gasses as long as you keep the gun clean and inners lubricated/maintened?
>>758157
KJW makes excellent GBBs.
>>758157
>>758158
>>758166
Apparently they have APS offer but is this some general offer that is marketed towards everybody? Anyone else had these kind of things? I've never really heard of APS.
http://shop.ehobbyasia.com/a-p-s-co2-action-combat-pistol-acp601b-kryptek-typhon.html#.VkEcYJcnPzI ?
Originally was looking these: http://shop.ehobbyasia.com/kj-works-kp-05-hi-capa-full-metal-od-gbb-pistol-gas-and-co2-1.html#.VkEc0pcnPzI
http://shop.ehobbyasia.com/kj-works-cz-75-p-09-tactical-gbb-pistol-black-asg-co2-ver.html#.VkEc1ZcnPzI
>not using multicam
what've we got here?
>>758178
don't worry, the Russians are here
>>758177
frig off lahey
>>758179
no really obese guys this time, but I hand picked these for you /asg/
>>758183
>>758169
I wouldn't ever get an APS pistol, but both of the KJW pistols are solid. The KP-05 is a hi-capa with TM compatibility and the P-09 is apparently very popular in Europe and has aftermarket parts out for it as well. Just be mindful about getting it grimey and dirty.
Avoid APS. They have some successful AEG products, but I've not seen any good pistols out of them.
>>758187
Thanks.
One more thing, is the CO2/Gas combo pistols how new thing exactly? Started seeing them more and more recently, and the KP-05 i'm pondering is that of a kind. Thanks for answers.
>>758197
Pretty much only KJW has made them of any quality, but they've been making them for a good while. WE used to make CO2 glock mags, but they would blow up their guns. The KP-05 will take pretty much every hi-capa mag out there.
>>756962
quite well actually, id go for it if i were you. its cheap and you can carry a fuckton of mp5 mags.
>>758197
If you are getting a KJW Co2 pistol just remember to keep the seals well lubed, as they dry out quick and under put under far greater stress than their green gas counterparts.
Looking for a precision inner barrel for a CYMA ak, found this.
What do /asg/?
http://www.evike.com/products/40453/
>>758183
waffle is that you?
>>758700
ZCI / ArmyForce or Madbull if you want a cheap one
Prometheus EG if want an expensive one.
>>758184
Most. Operator. Ever
>>758700
I don't get an Angel Custom, that's for sure. Look for 6.03 barrels. 6.01s are just begging for jams.
What pistols does everyone use?
Looking to pick up my first and would like some suggestions.
>>758725
>Prometheus EG if want an expensive one.
You realize Prometheus is basically mid-tier price wise right?
>>758770
KJW Taurus
So far so good with it.
>>758770
I have a KJW P229 and a WE F226, love how the P229 feels, and from what I can tell, you can't go wrong with something from KJW.
Kinda regret the F226 purchase though.
I want to use a computerised MOSFET but I don't know which one. I'm running a pretty typical G&G M4. What are the current suggestions?
I'll mostly want it for LiPO voltage detection, short protection, and a better trigger response.
I'd rather want one that fits entirely in the gearbox but I would have space in the buffer tube for one with an external module.
>>758771
Yes they don't cost as much as EdGI or ORGA barrels, but still perform very well. I personally wouldn't buy a 100$ barrel for AEG.
>>758770
Go try out stuff at the store.
Pick one that feels good in your hand
>>758783
http://www.btcairsoft.com/
You should first buy 10:1 or 12:1 gear set and a Frankentorque motor though. Those two are going give you a lot better trigger response. With Frankentorque motor, you don't really need to worry about draining your battery dry either.
>>758792
Got suggested brands and suppliers for both a gearset and a stupid-torque motor?
>>758796
Siegetek or SHS for gears.
ASG U-18000, P&J HT or build your own out of whatever neocan and chink stock motor armature.
helical gears
yes/no?
>>758802
The U-18000 doesn't seem to be very available in the UK. Would the Guarder Infinite Torque-up motor make a good substitute?
>>758846
No. Airsoft manufacturers are very loose with the definition of 'high torque'. P&J HT motor is widely available in EU. Check Taiwangun.
>>758848
No luck, will keep looking. I can't find anything on P&T though do they trade under any different names?
Would an E&L AK fit real steel handguards?
>>758850
http://www.e-tech.dk/infinity-18000-lsht-motor-lang-p-5752.html
http://www.e-tech.dk/shs-131-ultra-high-speed-gear-set-p-5500.html
https://www.militaria.pl/shs/zestaw_shs_zebatek_high_speed_14_1_(cl4014)_g_p8019.xml?cat=1327
https://www.militaria.pl/action_sport_games/silnik_asg_infinity_cnc_u-18000_-_dlugi_(mil18282)_a_p49336.xml
http://www.handelshuset-avlum.dk/product_info.php?products_id=8618
http://www.handelshuset-avlum.dk/product_info.php?manufacturers_id=60&products_id=3894
http://www.handelshuset-avlum.dk/product_info.php?products_id=7793
>>758781
>kinda regret the F226
Really? Not only have I had no problems with mine, but it's actually favorite pistol.
>>758807
Nope, not in along time. Neo Magent High Torque motor and standard gears unless you are building a monster,
>>758862
What about this type of helical gear?
>>758854
ye im pretty sure. do some research quick m8
>>758770
Marui Hi-Capa that has an extremely shitty WE slide.
Get a KJW or KWA for your first gun. WE has some good looking guns at a good price, but they're utter shit when it comes to build quality.
>>758886
My WE Barry Burton M9 has been rock solid for a year now.
>>758802
SHS for cheapness, Siegetek for higher stress builds, hopefully if you're going Siegetek, you're replacing the gearbox to a better one too.
>>758785
You can get EDGI for less than that, and it's the best you can get.
>>758886
>Getting a KWA
fuck that piece of shit brand.
>>758770
TM (and backup 3KHP) PX4 Storm
>>758855
The difference is the U-18000 is about £65 delivered and the P&J is about £25 delivered. Is the U-18000 really worth over double the P&J?
I'm not looking for a ricer tier gun, just something better than stock and suitable for a computerised mosfet.
>>758997
Anon what the fuck. You're buying a 100$ mosfet but 55$ motor is too expensive?
P&J is chinese manufacturer. They don't have proper QC, so you may or may not get a good motor. From my own experience, they have neomagnets and very high torque. The magnets might not be shimmed as well as with the ASG motor. The armature most likely isn't balanced as well as the ASG and the armature may wobble a bit. Two out of three you can fix yourself, but the ASG is still a little bit better. It's not twice as good, but it's definitely the easier solution.
>I'm not looking for a ricer tier gun
>I want to use a computerised MOSFET
These two don't really fit well together.
>>759035
Shit adds up, if there was a cheaper computerised MOSFET that didn't catch fire I'd go for that.
By not ricer tier I mean I don't mind spending a few bob on one or two nice bits, but I'm not going to throw £££££ at systema parts or HPA
>>759049
Buy GATE MERF 3.2 then. It's cheaper, fits in your buffer tube and lacks couple features like precocking. JG Blue is bit faster but still has plenty of torque. Buy a second hand chaolin motor for 5£ and build a frankentorque if you want more torque.
http://gunfire.pl/product-eng-1152200760-Mosfet-Gate-MERF-3-2-unit.html
http://gunfire.pl/product-eng-1152195172-Silnik-High-Torque-M-42.html
http://gunfire.pl/product-eng-1152205085-Set-of-High-Speed-13-1-reinforced-thread-wheels.html
So does anyone use the mp9, I really want one but I need justification for $43 per mag, its going to be my new sidearm.
>>759057
It's great, but not worth of becoming a primary. If you're buying it for a secondary you're laughing. The RoF is too high for a primary and you can discharge a mag on a warm day in around 1 second.
>>759057
They are fucking cool, if you get the suppressor and add a longer barrel you'll have an incredibly accurate gun.
and if you want to play like a nigger you can always BRRRRRRRRRRRAP a room
>>758859
I think it might have been a pistol that slipped through the cracks of QC. The mag release basically fell out of my gun on the second reload, and the slide stuck a little out of the box. Seems like it's fixed now, when I disassembled it to put the release back in I guess I accidentally solved the sticking.
>>759059
Any idea if there are holsters?
>>759088
http://www.evike.com/products/38605/
http://www.evike.com/products/27473/
Is this a good buy? Want to get an AK without paying out the ass. I like the look of this one. If no, then any suggestions?
>>759089
That only works for the railed one. He's going to need one of these.
http://www.robertrtg.com/store/pc/MP9-TP9-BELTLOOP-HOLSTER-RIGHT-HAND-SWISS-MADE-p3614.htm
http://shop.ehobbyasia.com/hephaestus-holster-for-ksc-kwa-mp9-gbb-right-hand.html#.VkOfkBFVhBc
Or this
http://natechairsoft.com/product/kydex-mp9-holster-deltac-black-grip-version/
<script>window.googleJavaScriptRedirect=1</script><META name="referrer" content="origin"><script>var n={navigateTo:function(b,a,d){if(b!=a&&b.google){if(b.google.r){b.google.r=0;b.location.href=d;a.location.replace("about:blank");}}else{a.location.replace(d);}}};n.navigateTo(window.parent,window,"http://www.popularairsoft.com/files/imagesnew/Natech_DelTac_Kydex_MP9_Holster.jpg");
</script><noscript><META http-equiv="refresh" content="0;URL='http://www.popularairsoft.com/files/imagesnew/Natech_DelTac_Kydex_MP9_Holster.jpg'"></noscript>
>>759094
It's Marui based instead of VFC. so it's going to be out of spec when compared to the real one and upgrades can be a pain. The stocks are also prone to breaking.
I would personally spend the extra $40 and get the CM040C which is easier to upgrade, has a stamped steel body, and has a stronger stock trunion.
http://www.evike.com/products/48517/
>>759094
Like other anon said, get 040 series.
I use the cm045s and it feels very sturdy. I use a downgraded spring and it shoots accurately (1'x1' roughly) at around 125 feet
>>759096
Jesus Christ I need to get this gun, with options like these. Now I just need to figure out how much to charge for wedding photos to see of I can come up with the money for one of these, like 2 spare mags and that middle holster 60$ holster
what makes systema ptw's so special (and expensive)? They look like just another m4 to me
>>759117
I can vouch for the accuracy of the 040 series, I have a 040C and it shoots incredibly tight.
It's annoying, all I did was change the stock hop rubber and it shot like a lazer, have tried to get my other two AEGs performing similarly, but just can't seem to do it (not far off but not as consistent as the 040C).
>>759132
I'll take the bai-- no I won't, do your own research. If you don't know what they are and what they do look it up
>>759142
I visited their website and concluded they're just aeg's with a mosfet and a working bolt catch
>>759145
You read nothing about the whole real steel compatibility, 1:1 size and weight and other features, right?
>>759147
their page said something about real steal compatibility, which I guess is more or less the same as 1:1 size. Real steal compatibility isn't anything special for airsoft. Weight is no big whoop either as there's plenty of airsoft replicas with more or less the same weigth as their real steal counterparts. I don't know about other features, please tell me.
Also 1:1 size and weight, weight loaded or unloaded? A full real steal magazine adds more weight that an airsoft one.
>>759147
also, real steal compatibility for pistol grips as well? I'd be surprised a real steal ar 15 grip will fit on a systema ptw
>>759150
It's not "more or less". It's exactly 1:1 in size. Official Systema PTW mags are made so they weight the same as a loaded mag.
Real steel compatibility sure is special. Try fitting anything real steel on a regular AEG without doing some modding before.
>>759153
No, real steel grips won't fit for obvious reasons but they're the exact same size. AEG grips feel humongous after using a PTW for a while
>>759156
okay so not whole real steel compatibility.
So full magazines weigh the same as empty ones?
>>759137
What rubber?
>>758102
Not one with a carbine length barrel. ICS are good, but unless there happens to be a way to shorten the outer barrel without mauling it off, CYMA and King Arms are my only options.
>>759057
fuck that shit nigger. I have a KSC mp9 and rock it as a primary with 5 mags. it's really really really fucking neat-o.
>>759059
it's so easy to 3-5 shot burst with it though. Use heavy (.3g+) bb's with the extendo barrel and suppressor and you can just rape outdoors as well.
full auto actually eats those gay little springs on the nozzle up though. you'll have to replace them fairly regularly if you enjoy auto, but they're cheap.
>>759121
do it. DO IT. I have never used a GBB as fucking fun as this. it's LOUD AS FUCK, has excellent (50+) bb capacity for the mags, the gas system is fantastic, the mags hold tons of gas...etc.
buy used though. mags up here in canada are like fuckin $75 each. i bought a package of the gun/5 mags/extended barrel/two bcg's/mock suppressor/4 fastmag pouches for $350 and some shit in trade off the local used gear forum.
I do admit, though, for aftermarket shit the mp7 wins. All the seal impression kiddos fuel the market for it versus the mp9. I just hate the mp7 ergos and appearance, and the rof is very significantly lower than the mp9.
>>759132
a bunch of retarded features that people think they should have on a non-recoil replica rifle. you can easily build a gun with better range/rof/trigger response/internal lifetime/externals/etc for literally 1/4 the price of a bone stock PTW.
if you want all of MUH REALISM shit a GBBr (or daytona gun) is the way to go.
>>755076
>not having a national organisation that has rules that are standardized across the entire nation for every game
>not having a national organisation that gives you insurance for in game injuries.
well done america
>>759166
Guarder clear.
>>759221
This is true. If I ever try and use mine as a primary then I dominate CQB. I still think that proportionally though it's better to have a rifle.
Did we hit a bump limit? Anyone making a new thread?
>>759300
This is a slow board, we don't need a new thread
>underbarrel shotgun never
>>759302
Man, I totally want one.
I think its hilarious and could be fun.
>>759302
colt hammerless or TT 33?
>>759300
new thread only when we hit page 9
>>759302
But anon... Zoxna's micro launcher is exactly an underbarrel shotgun.
>>759315
TT33, note the lack of safety lever
>tfw no qt3.14 pilot gf
>>759342
That was fucking hilarious. Picked her up then picker her up.
>>759291
That's what I want one for, as a sidearm in addition to my rifle, I play field airsoft so having something I can spray with as I run into a building would be nice
>>759221
I personally think the WE M-14 is more fun when it comes to sound and recoil, but the mp9 is good too.
>>759320
Here wmasg.pl/pl/news/show/674528
>>759291
If you want to err on the sensible/utility side, it's not a bad idea to get multiple upper receiver/hopup/barrel combos for your m4.
If you have the tools/savoir faire, you can overvolume the piss out of your short barrels for cqb in order to meet field FPS limits. My stubby barrel is 375fps but the gun shoots 430fps on a 363mm standard m4 barrel. Note this doesn't work if they chrono for joules using .36g or so, as it will show the joule creep. Just don't use heavy BBs in cqb and it's functionally the same.
after a while you get bored though of utility-based m4s. that's why i got my little dakka blaster.
Time to post patches and bags boys!
>>759415
>Kommando store
>BДB
I liek you
I can't believe how good this Fakepul sling is. I got it from some Chinese airsoft site for the equivalent of £5 + postage and it's amazing.
None of the buckles or clasps have broken and the webbing is weirdly smooth and soft meaning it really doesn't snag on anything like a chest carrier, it does mean that sometimes it likes to readjust itself but I've been mostly able to overlook this.
Pretty much use this sling and nothing else now.
>>759390
>wmasg.pl/pl/news/show/674528
brb, too busy fapping with one hand while buying a TT33 with the other
Any airsofters in the NY 5 borosilicate area?
>>759425
Some guys from Long Island/Queens came through my local airsoft place in Milwaukee last week. They were pretty damn bro. No idea if they're back out east yet, but they rolled up to the field as their first stop after driving sixteen hours out to here.
>>759415
Holy shit that shimapan patch is huge
>>759415
/ak/ Represent'n
>>759415
r8
>128.63 euro
Should I?
>>759438
If you don't you should sell all your slavshit.
>>759430
Damn I missed out on the group buy for /ak/ patches.
>>759425
I live in queens and have all the gear but only played a few times because I couldn't find anywhere good and don't have a car.
About to get that KP05 and would like to have some extra mags as well. EhobbyAsia is currently out of the original 29rnd mag, but KJW makes 31rnd HI Capa mag for KP08/KP06. Internet gives info that all HI CAPA double stack-mags made by TM and KJW fit but will the 2 BBs make the mag peek out from magwell a few stupid inches? Or should i buy just the original 29 mag from amazon and not to risk the incompability. Reviews from KP05 say it takes TM and KJW HICAPA and possibly other parts but just little spooked about first purchase.
who NODs here?
I've spent thousands on airsoft, yet I'm still too poor for NODs.
>>760048
I have some toy night vision that are functionally Gen 1 NVGs, eventually I'm going to get around to figuring out a way to attach them to a rhino mount and put them on my helmet.
>>759425
Plenty used to be on the Island, but after the rise of StrikeForce and the closing of Coram the player base drifted to younger kids.
There is an NYC airsoft community but it is heavily Filipino.
No places to play in the City itself.
SFS (Deer Park) sucks now since most of the good staff got real jobs. New owners just bought it, but we'll see if it changes anything.
Cousins Coram was forced to close a few years ago, ruining everything for ever.
Cousns Riverhead is pretty shit.
High Velocity Paintball is 100% speedsoft.
You have to go upstate or out of state.
>>760280
Have you been to ricochet tactical on Levittown? They have a great rule about banning hpa systems in cqb. I wanna drop by before the end of the month.
>>760553
Negative, I stopped playing locally before they opened, still looks very speedsofty to me.
I'm an OLD School (+10 Years) player, I'm still used to the old Coram 4ish hour games. So game that lasts under an hour feels shit to me.
Last time I went up to Zulu24 I barely had time to scout and flank before the bullshit minigame was over.
>>760387
Yeah, you're such a serious player that you don't go playing every weekend, and only put on your gear every once in a while to take a quick pic and let it collect dust in the closet
>>760708
>>760553
Why would you ban all HPA systems? Why not just force them to use semi-auto only? A decent tech can make an AEG achieve similar trigger response and fire rate as HPA systems.
>>760746
>no NODs
lol casual faggot
>>760708
2
>>760708
>>760752
>>760757
>>760673
I've played at cousin's when I used to play paintball back when I was in middle school. Loved the half day scenario games. I got into airsoft about a year ago by playing at my 12 year old nephew's birthday party
>>760749
I dunno dude. I'm just looking for a place to play at, I don't really own a hpa system and to be honest I don't really care.
>>760755
>pakol ?
Check
>shemagh?
Check
>operator beard?
Check
>battle kilt?
Check
10/10 would man love Thursday with
>>759435
From what I understand, there's a stronger community over in New Jersey. I'm from that side of the Hudson, but I moved before I really got into airsoft. There's also stuff happening over on Long Island based on the guys who came in last week, but NYC pretty much a no-fly-zone. As long as you keep it in a car between the city and the field, whether you choose New Jersey or Long Island, you shouldn't have too much trouble.
>>760755
Gratto?