/asg/ - Airsoft General

File: CaspianGapProp4.png (2MB, 1535x1165px) Image search: [Google]

2MB, 1535x1165px

FIVE TICKETS BOUGHT AND LOCKED IN. TWO MORE GETTING BOUGHT THIS WEEK. THIS IS ON LIKE DONKEY KONG. WHAT'S YOUR EXCUSE TO NOT JOIN THE FIGHT FOR THE GAP?

This year's SMUG Squad Milsim trip will be at Milsim West's The Caspian Gap on OCTOBER 21-23 IN PERRY, GA AT THE GUARDIAN CENTER. Faction will be Cossacks. required attire is at least a track jacket (track pants recommended) over a telnyshka. OD or Russian cammo bottoms are also acceptable if preferred. There will be a group buy from grey-shop for Mockba sneakers and any other Russian gear desired for anyone going.

The goal is to be there and sorted before noon on the 21st to make ample time for final checks and go on last second store runs. So far there are two planned carpools: one coming from Boston and the other coming from Chicago. The Chicago carpool will be able to pick up anyone landing at the Atlanta airport with some modest contribution to gas and rental. The Boston carpool is going at least a day early to get a hotel room to use as landing point for everyone going.

IF YOU WANT IN ON EITHER OF THOSE, OR THE EVENT IN GENERAL, JOIN THE /ASG/ SKYPE GROUP:
skype:?chat&blob=BWX6g5kH-TZod4k0M4IkuJPQCTnNA454Vw3vEdVW7bs4CScPCOJG8xtPNy4BOOweVKrZ8YlLiyCwsML7Njop6Z2IqjvqMSKDMFGIHMn_Py8GzCOuo1UjketdtAlNH8r_ledI8OdYf8HrXycL8IUQw5hFPWjVhF5SLqYk9pbOOD1B9pqXTBXfTrdx0KU2vmQVa5qOaCbhV73qro-p1YH0GurZgqoWeiY

CHEAPER TICKETS ARE OVER, BUT THERE'S STILL PLENTY OF TIME TO PICK UP TICKETS AT $175. IF YOU WANT IT, GET IN DAT SKYPE GROUP.

File: image.jpg (466KB, 1280x960px) Image search: [Google]

466KB, 1280x960px

>>1431256
>abomination thread

>the wannabe navy seal milsim faggots said it couldn't be done
>the Slav faggots cried as I added western influence
Let the hate fill you

>there will never be a good GBB LMG

File: image.jpg (322KB, 1280x960px) Image search: [Google]

322KB, 1280x960px

>>1431299
There was more before this one

File: tumtummuckamuck.jpg (153KB, 1023x573px) Image search: [Google]

153KB, 1023x573px

>>1431256
A friend of mine made this out of ASG revolver. Shoots anything between 2,5J - 4J.

>>1431256
>>1431257
>>1431299
>>1431304
FAGGOTS

File: image.jpg (506KB, 1280x960px) Image search: [Google]

506KB, 1280x960px

>>1431310
This one wasn't that bad. I wish I had pics of it with the rpg scope I had on it. All echo1 shit. They're all I buy these days really.

>>1431304
Just because something is rare and expensive, doesnt mean it doesn't exist.

>>1431304
Why would you want a gbb lmg?

>>1431257
>Friendly fire Oxide
>Pat down and feel up a YouTube celeb
>Out-meme the Rushing Russians without turning into cancer
>Give John Lu the middle finger the same day as his precious Operation Irene
Sign me up!
(I'm already signed up)

>>1431359
>sewing machines

File: 51856549_p0.jpg (589KB, 1414x1000px) Image search: [Google]

589KB, 1414x1000px

>>1431475
Who wouldn't want to join a band of 4chan misfits upstaging HIGH LEVEL players?

File: Slavic liberator.jpg (24KB, 276x280px) Image search: [Google]

24KB, 276x280px

>>1431475
Maybe "violate" some """human rights""" too.

File: A9Bo6.jpg (68KB, 920x872px) Image search: [Google]

68KB, 920x872px

>>1431299
that's a pretty high level L/DNKM you got there

>>1431256
For my 17th birthday, i made a literal "plate carrier" using 2 paper plates and some string

File: Fulda Gap ASG.png (3MB, 1760x1065px) Image search: [Google]

3MB, 1760x1065px

>>1431257
Three /asp/ies and a /k/ommando confirmed and more on the fence, the Fulda Gap team is starting to look legit!

This year's Fulda Gap will pit /asg/'s team "Weaponsexual" against the communist forces in what is the East Coast's largest airsoft experience with 1000+ players in attendance.

Grab your OD, M81, or flecktarn uniform and join us in the NATO West German 5th Panzer Division where we will repel the commie attack and proceed to butt rape those slav shitters.

THIS IS A NON-MILSIM SCENARIO GAME AND TICKETS ARE GOING FOR MERELY $50 FOR ALL THREE DAYS AND CAMPING THROUGH JULY 15TH

Simply join the /asg/ skype group through the link in the OP if you're interested.

File: SPRCBG-PH-0-67-0001-1L.jpg (361KB, 800x533px) Image search: [Google]

361KB, 800x533px

Does anyone know of any modern pouches PPSH drum mags should fit in?

>>1431256
>Any time you've tried something dumb out with your airsoft gun or kit just to see how it would work?
I epoxied a cheap Night Owl monocular onto a mount from a broken Trijicon RX-01 replica.

>>1431489
It's pretty tight. Just make sure you don't shoot the high level truck!

File: image.jpg (167KB, 941x723px) Image search: [Google]

167KB, 941x723px

>>1431651
>when you're told not to shoot the high level truck
>mfw
I don't fuck with gorillas
#rememebrthehighleveltruck

>>1431304
Why not just make one yourself?

>>1431256
I tried to make a master key shotgun from an old springer pump I had but it was clunky as hell and looked stupid too.

Anyone know whats wrong with my Marui M9 GBB?
>load up the mag with BB's and gas
>shoot
>no BB comes out, slide moves (not sure if it moves fully to the back)
>shoot again, slide moves slightly less, BB doesn't come out
>shoot again, slide doesn't move, no BB comes out
>shoot again, same thing
>shoot again, slide shoots back,gun vents out all gas through the shell ejector hole

Tried with several different mags so its not the mags. Maybe the O-rings are fucked?

>>1431861
Valve spring might be too stiff and is causing the hammer to light strike.

File: HIGHLEVEL.png (102KB, 1110x687px) Image search: [Google]

102KB, 1110x687px

>H I G H L E V E L

>>1432011
How come everyone on this general seems to have played in the same games with le monkey of elevated tier?

>>1431304
You can get a ghk RPK but if you wanted actual good magazine capacity you'd probably have to niggerrig something. ~60 shots on c02 is the best you can do, but that'll be endemic to gbb

>>1432057
Everyone on this forum why isn't you is the same 5 dudes from the amerifat northeast

>>1432231
>same 5 dudes
>5
>thinking it's just 5
Have a high level day.

>>1432287
Sorry to leave you out, six.

>>1432310
You're a pretty funny dude, dude. You sound almost like a member of team high level trying to damage control the fact that your team is hated across a whole state.

>>1432360
You're mistaken. I'm a southern boy and dislike your entire state, including the hiiiigh level players.

File: image.jpg (24KB, 255x255px) Image search: [Google]

24KB, 255x255px

>>1432310
You high-level listen here buddy an entire shitsoft community and a moose fucking hate this ape. So it's not 5, 6, or 7 people it's more like a few hundred at least.

>>1432370
Shouldn't you be bathing pigs right now, corn jockey

>>1432450
Please, we're awash with cotton and tobacco. Corn is a Midwestern plebs crop.

File: dCU2F2N.jpg (394KB, 1000x1166px) Image search: [Google]

394KB, 1000x1166px

>>1432576

>>1432370
>thinking anyone likes ct outside of the rich cunts that live here.

>>1432567
>puked a little

File: image.jpg (54KB, 640x457px) Image search: [Google]

54KB, 640x457px

Anyone ever use one of these?

>>1432687
It's not high level

>>1432687
keep your unrealistic shit in LARP events.

>>1432687
I would if I didn't have to order it from the USA and pay out of the nose for it.

File: photo_1467336831800.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

>>1431256
Not sure if abomination, or cool.
By the way, what good pouches for svd mags that I don't have to order from Russia.

>>1432805
Please tell me that scope is just to trigger me.

>>1432687
Is it any better than the snow wolf one?

>>1432833
It IS the Snow Wolf one. Matrix is just Evike in-house brand that covers the smaller no-name Asian manufacturers.

>>1432814
Stop being a slavboo

>>1432805
what scoep is that

>>1432814
Russians arent total poorfags anymore

>>1432944
Is it trash? Was going to order it

File: aLnUTrI.jpg (1MB, 2334x1653px) Image search: [Google]

1MB, 2334x1653px

>>1433024
That only really applies to their SF groups, with ones like the FSB Spetsgruppas and MVD's SOBR running more Western style equipment.
Regular grunts are still pretty povo.

File: 1452355820533.jpg (6KB, 250x250px) Image search: [Google]

6KB, 250x250px

>not upgrading your replicas
poorfags lmao

>>1433121
I think everyone replaces parts at one time or another.

File: 1444711988343.jpg (16KB, 185x243px) Image search: [Google]

16KB, 185x243px

>>1433135
>not fully upgrading your replicas
poorfags lmao

>>1433121
Just spent 70 buckaroos on a new barrel/hop up for my polarstar. I can feel poorfag butthurt already

>>1433146
you are the cancer killing airsoft

>>1433151
For what? Owning a polarstar? Fuck off poorfag you guys always get salty when people own airsoft guns worth over 300 bucks.

File: oh shit nigger.jpg (18KB, 366x380px) Image search: [Google]

18KB, 366x380px

>>1433135
>He replied

>not using HPA
poorfags lmao

>>1433176
>playing with a hose in your gun and a tank in your back
What the fuck

>>1433184
Better trigger response
Low maintenance costs
More consistent shots
Hose isnt that noticeable at all

>>1433188
I mean if you like it I can't do anything to stop you, but I find the whole concept retarded. Just go play paintball if you want to do that.

>>1433193
Its not that different than gbb and paintball isnt the same thing at all

I don't really feel the need to get an HPA gun, since the advantages aren't great enough to warrant the price

>>1433193
>just go play paintball if you use hpa
the poorfag excuse

Is airsoft better than paintball?

>>1433208
Speaking as someone that has owned AEGs and HPA, the latter is way more satisfying to shoot.

>>1433246
Depends on who you ask.

>>1433246
>shooting balls of paint out of a caulking gun strapped to a hose and a bicycle seat

vs

>guns that actually look remotely close to the real steel

>>1433121
>not upgrading your replicas
Amen brother, I just paid €30 + €50 installation for a spring change

feelsgoodman.jpg

>>1433062
Hence why that optic is on an SVU.

does anyone recommend a WE M4 GBBR for a first time airsoft owner?

i care more about "realism" than i do about competitiveness, but i dont want to spend more money than i need to.

is there a better cheaper option or is the WE m4 gbbr pretty much the best cheap price/value option there is?

>>1433823
Get a KJW instead. Less shit to go wrong.

>>1433835
>>1433823
There isn't much to go wrong on a WE M4. The parts start to go 50/50 after about 30,000 rounds. Once that happens, get a new trigger assembly. Most you could have happen is a crack in the hop up assembly, fixable by a new unit.

As someone with multiple GBBR's, if you are really serious about GBB's, don't skimp out because it's the cheapest. WE's are nice, serviceable, and tons of aftermarket parts, but they aren't the most consistent. As well as the fact, unless you're getting a SCAR-H, their mags tend to have a lot of cooldown.

My advice? Save a little longer, enough to invest in a GHK M4. They're reliable as hell, they're tough as hell, and their magazines are second to none. You can't go wrong with GHK.

>>1433863
The M14 also has some stupid good cooldown resistance.
I wouldn't recommend it to anyone though.

>>1433878
As I recall the M14 had the worst of the problems with cooldown. Mayhaps I heard wrong.

>>1433887
Mine can go through a fully filled magazine in one go with no problems, but I also live in Florida so that might be it.

>>1433924
Up here in Michigan I doubt I would get similar performance. Thankfully though, my GHK 74U can get through 2-3 mags in one fill.

Alright slavshitters, where the fuck do I find bakelite 5.45 mags? It seems like none of the retailers have them. Hell, even that shitty brown bakelite would work at this point.

>>1434065
Gas or AEG?

>>1434161
AEG

>>1434065
Do you mean like plum mags, or ones with the Bakelite pattern?
Ehobby sells some plum mags http://shop.ehobbyasia.com/mag-100rd-ak74-magazine-for-ak-aeg-plum-5pcs.html#.V3dFBvkrK9I, and G&P makes some ones with a Bakelite-ish pattern http://www.redwolfairsoft.com/redwolf/airsoft/Magazines_G_P_AEG_Std_G_P_150rds_Mid_Cap_AK74_Magazine_10pcs_Package_Bakelite.htm

You could also just get some cheap brown ones and DIY the pattern.

File: 1459540085769.png (233KB, 400x400px) Image search: [Google]

233KB, 400x400px

>>1433442
>paying almost a $100 for a simple spring change

just bought evike's open box deal for $85 in hopes of a starter AEG

did I fuck up?

>>1434278
What was the AEG?

>>1434292
innamail rn

fingers crossed for a jg g36 or a non-plebshit m4

>>1434307
Did you mean the Box of Awesomeness?

>>1434313
http://www.evike.com/products/52206/

>>1434318
Well it's for $85 so its probably a win, just dont get your hopes up

>>1434318
I'm a psychic and I can tell you it's a Well D69.

>>1434324
I already have the CYMA spring m1 so fugg

>>1433193
>he doesn't know about the in-stock tank configurations

>>1434337
There are a lot of things I do not know about.

>>1434345
women?

>>1434273
>replied

>>1434318
inb4 Combat Machine

>>1434370
would be dissapointed if it was a cm unless >no ris

How do you set up a duel primary loadout?
This is my loadout.
Svu with an Evo 3 secondary.
It's supposed to be paired with a gray top and jeans for extra civilian spec.
My only issue is that I don't have a black battle belt setup, so I guess tan will do for now.
All my svu mags are in the large pouches on the belt and the cz scorpion mags are stored on the Chinese blue force gear chest rig and taco pouches on the belt. I also have a backpack for extra storage for tax snacks and bbs alike.

File: IMG_20160702_013018.jpg (377KB, 1440x1346px) Image search: [Google]

377KB, 1440x1346px

>>1434379
Forgot picture

Has anyone here ever bought bbwars related stuff from Japan?
I want to place an order from Impulse101 but I don't know if EMS or Airmail would have the least time spent in customs.

>>1434379
Akimbo

>>1434384
You need a better pouch arrangement. I would question the retention of the Scorpion mags, after you pull one out of the pouch. Consider switching for SMG tacos instead.

>>1434384
>>1434539
Oh, and I'm not sure if they are, but if they are not, consider going for quick adjustment slings like Vickers or VTAC slings, should make it easier to transition between weapons. Also consider some sort of a retention system, make one from bungees/shockcord maybe, so those guns won't shift so much, as you constantly will have one slung.

>>1434273
haha got you! :^-)

>>1433013
>>1433024
>>1433062

The fucking thing is like 20 centimeters above the barrel you stupid fucking retard faggots. HURR SLAVABOO GUT OUT XDDD, fuckoff you memeing todlerfidlers

>>1434845
Suck a dick slavboo. It's not like he has to worry about recoil or taking shots at hundreds of yards. Stop being a tryhard faggot, you damn pole smoker.

>>1434845
Its an airsoft gun you autist there's not recoil

File: svu-a_1.jpg (16KB, 650x195px) Image search: [Google]

16KB, 650x195px

>>1434845
You could still easily zero it to function properly, and the height allows him to still use the irons.

Most optics are mounted that high on Russian rifles, it (was) part of the doctrine to allow infantry to still use iron sights while the optic was attached without co-witnessing.

File: 1466871838828.gif (960KB, 250x348px) Image search: [Google]

960KB, 250x348px

>Airsoft megastore has a 70% off coupon code going on
>They jacked up almost all the guns not on MAP 300%
You crafty fucking jews

>>1434942
Welcome to online airsoft shopping.
>24% off at Evike for anything not MAP or on sale
>everything is on sale or MAP
You could always try one of the Asian stores.

File: 1466505075487.jpg (72KB, 636x960px) Image search: [Google]

72KB, 636x960px

Does anyone do non-Russian slav kits?

I'm putting together a generic Balkan Wars/Yugoslavian War grunt loadout right now.

>>1434951
http://www.evike.com/products/57580/
>correct stock but has shitty trademarks

http://www.evike.com/products/54560/
>less expensive and better trademarks but has a fucking crane stock

evike is literally triggering my autism

File: CZ-75 Pre B.jpg (962KB, 4264x2400px) Image search: [Google]

962KB, 4264x2400px

>>1434951
>>1434942
RedWolf has 15% off their prices until July 6th, I ordered a CZ-75 (and a magazine) which I had been looking at lately, I figured now was as good as any.

Though they have a whole list of excluded brands so I figure the nicest stuff won't be 15%.

File: no thanks.gif (3MB, 244x250px) Image search: [Google]

3MB, 244x250px

>>1434970
>putting a crane stock on a SCAR

>>1434970
Gotta love those licenced trades where the 6MM is nicely engraved to the gun.

File: DSC06962.jpg (247KB, 1000x750px) Image search: [Google]

247KB, 1000x750px

>>1434970
Those prices were probably set by WE-Tech.
>>1434967
I might show some appreciation for my Polish heritage when I get the chance.
>>1434973
I ordered myself a Tanaka Ladysmith last night, neat little collector's piece and might be fun to use on occasion.
>Though they have a whole list of excluded brands so I figure the nicest stuff won't be 15%.
You're not gonna get a sweet deal on Airsoft Surgeon but there are some more rare and quality items on there that the discount applies to.

>>1434974
>>1434977
>>1434979
what were they thinking when they decided to carry only the crane stock variant of the non-shitty trademark version that's sold overseas, besides the fact they can get away with charging fucking $47 for a WE SCAR stock

evike can go fuck themselves

>>1434988
"People will think this looks cool and buy it, if not we can put it in a BoA and recover our losses"

File: 1404101854415.jpg (95KB, 1024x680px) Image search: [Google]

95KB, 1024x680px

>>1434979
Yeah, the KJ Works CZ-75 is supposed to be quite nice so I was glad to see they hadn't excluded KJW.

Snubbie/pocket revolvers are pleasant, wish they made variants of some of the Rugers.

>>1434988
They can mark up the good looking one and just stock couple of the crane stock variants if someone really wants one. Either way, they win. Could also be that they get into trouble if selling the one tht looks like a SCAR without FN and cybergun getting a cut of the pie

File: 1_ta200535_600.jpg (60KB, 600x600px) Image search: [Google]

60KB, 600x600px

>>1434998
I wish the R8 wasn't trash (169 fps sounds a bit too low), would have made for a nice CSGO loadout sidearm

File: Confusedportugueseman.jpg (97KB, 472x514px) Image search: [Google]

97KB, 472x514px

>>1434977
>Government Use Only
>Cal: 6mm
>Navy Seals
>Delta Force
>Marines
>Zombie Killer
>Special Forces
>Spec Ops
>CQB Master

>>1435033
Shit like that is why I declined when they asked if I wanted any engravings on my AR.

Anyone have to shrink BDUs before? These Propper pants I got are fine dimensionally but are a bit unfitted.

File: 21449876671443_785.jpg (56KB, 800x600px) Image search: [Google]

56KB, 800x600px

Does anyone have experience of the new WE M92?

I handled one last weekend and it seemed really nice, but does it hold up over time?

how dangerous is propane/green gas when its in a closed room with somewhat limited ventilation?

i'm interested in using airsoft in my apartment room but i would have to leave my doors closed just to make sure i don't bother my roommates.

how dangerous is it to be inhaling the propane/green gas from my gbbr? id probablyopen my windows but the ventilation through those is not that great

>>1435209
It's not like you're going to miss those few years of your life you're going to lose.
It's not gonna be fatal unless you sniff it straight from the can.

>>1435209
Propane, like any other gas other than air, is an asphyxiant in high volumes.
If your room is small, I'd suggest opening a window and putting a cheap box fan in it to aid in ventilation. Also maybe look into CO2 mags if your gun can use them.

>>1435205
Everything will do wrong. The only M9s worth looking at is the Marui with a metal kit, and KJW.

>>1435012
Apparently Tanaka's "Jupiter" finish isn't exactly durable, so they're more or less just show pieces.

>>1435236
co2 is safer than propane? ill look into it, thanks.

>>1435281
I mainly say CO2 because it doesn't smell like rotten ass.

>>1435236
I always thought it would be too much of a hassle to always be screwing/unscrewing those capsules. And I figure it would be expensive too.

>>1435288
A box of 12g capsules is about the same as a can or two of green gas.

>>1435209
Well, it's a carcinogen asphyxiant, so your call. Why not get a can of duster?

>>1432805
Your scope is an ugly motherfucker and therefor complete trash as it ruins the aesthetic value of the gun.

File: SVDS.jpg (343KB, 2953x791px) Image search: [Google]

343KB, 2953x791px

>>1434913
A PSO sits high on an SVU because it's the only way you'd be able to get a proper cheek weld.
Others like the 1P29 and 1P78 still do sit high, but they're just high enough to use irons while staying usable.

Your Mk4 CQT on the other hand sits so high that it's just silly.

>>1434974
Maybe it's less fragile than the original one. The plastic in some of the AEG models is pretty weak.

File: 1466392933733.jpg (80KB, 476x492px) Image search: [Google]

80KB, 476x492px

>>1435415
>slav bullpup
>aesthetic value

Are red dot magnifiers worth it in Airsoft?

File: P1050438-1024x768.jpg (103KB, 1024x768px) Image search: [Google]

103KB, 1024x768px

>>1435501
You mean these things? I hear they're pretty much worthless. The build quality in airsoft sights is too poor for them to co-operate well together. I haven't tried them out myself, so take it with a grain of salt. There might be exceptions too.

4x32 Acog with Docter sight is something I'd wholeheartedly recommend.

>>1435501
I have a real one I run on my replicas that I also run on my real steel rifles.

It's a Vortex magnifier that I use with my Strike-fire 2, it adds 3x magnification. It's nice for milsim or field games so I can get a good positive identification or look farther, but like

>>1435523

said, airsoft magnifiers are usually quite poor and you're better off getting a magnified optic and just taking non-sighted shots at close range.

>>1435523
You mean a real military acog? Aren't they really expensive? I haven't even seen one for sale on any (EU) airsoft store.

>>1435561
Gunfire sells them: http://gunfire.pl/product-eng-1152209988-ACOG-4X32C-scope-replica-with-RMR-sight-and-ilumination-source-fiber-black.html
I think ACM models cost about 120USD in Asian stores.

>>1434951
I bought two GHKs from Evike on sale and I think that's literally the only good option

File: 1465089724640.jpg (39KB, 663x579px) Image search: [Google]

39KB, 663x579px

>>1434942
>Airsplat had a "CLOSING OUR DOORS, EVERYTHING MUST GO SALE" at the end of 2015
>They never actually closed

RIP money, just ordered a SR25 daytona kit, still not sure if I want to get it installed or sell in in a few months

File: 1465666363559.png (55KB, 380x264px) Image search: [Google]

55KB, 380x264px

http://www.evike.com/products/28320/

http://www.evike.com/products/35195/

Which one /air/nons?

>>1436118
Blowback is just a lot more fun IMO

>>1436118
I don't think you can ever go wrong with G&P
>>1436155
It's fun but also another mechanism to break

>>1436172
Are they easy to break?

File: Untitled.png (203KB, 557x244px) Image search: [Google]

203KB, 557x244px

>not even airsoft is safe from fuddlore

>>1435892
Get the G&P. It's made better and doesn't have a gimmicky blowback gearbox straight out of a Combat Machine.

>>1436155
The blowback on G&Gs is pathetic. It's a thin sheet of aluminum moving a couple of centimeters back and forth that adds nothing to the experience other than a little *CLING CLING CLING* sound.
Bolt and Marui are the only companies I can think of that actually have good EBB rifles.

>>1436242
Thanks anon

>>1436202
Granted I don't know a lot about the electric guns, but isn't the forward assist just a detail on airsoft?

Like, what can it possibly do besides pressing against the serrations on the bolt carrier to push it forward?

>>1436248
I was referring to the spring, everyone says keeping springs compressed makes them break.

Which isnt true.

>>1436252
Oh, that old thing, yeah, that's just retarded.

So what does the forward assist actually do on most AEGs?

>>1436256
It has a spring inside it which compresses when you press it.

>>1436252
On most airsoft stuff, my understanding is the springs are fairly low quality and will actually deform or break under consistent tension.

This is what I've been lead to believe on magazines at least.

dump pouches, yea or nay?

File: Blops m4.jpg (377KB, 2880x1800px) Image search: [Google]

377KB, 2880x1800px

So I got some shitter walmart blackops cobra m4 AEG from a liquidation store for like $20, and obviously the thing is defective.

In my hubris, I figured that me with my high falutin' engineering (electrical, mind you) degree could get the thing chugging with just a little gentle persuasion, but I'm afraid I'm stumped.

All the bits appear to be in place. I've 'ad her open, and aside from the gear teeth being full of plastic piston pinion shavings, and the pinon teeth being a little worse for said wear, there doesn't seem to be any obvious issues.

But when I have it together, pulling the trigger gets me the sound of the piston being pulled back most of the way, and then stopping, and then no amount of persuasion will get it moving until I have the whole thing apart again.

It's not the shit fucking 8v battery, because I was running it on 10.5v from a bench supply, and the thirsty little off-brand fucker was eating a good 15A.

Should I try a new piston, maybe? or cut my losses and get store credit?

>>1436672
Adjust the motor height.

>>1436660
Literally why the fuck wouldnt you, do you want to lose your mags?

>>1436360
Nah. They hardly lose any tension once they've settled in. A loss in output energy is usually due to air compression.

>>1436672
learn to shim the gears and adjust the motor.
https://www.youtube.com/watch?v=ZahpxfCsSAY

File: tumblr_nuiwhmzbqN1sr1lf3o1_400.gif (940KB, 400x228px) Image search: [Google]

940KB, 400x228px

So, I want to run a PKM.

What sort of modifications should I do to it. I'm not looking to HPA it, so that's out of the question.

It would be an A&K or Matrix (Which I assume is just rebranded A&K).

>>1437505
It really just needs the usual things like AoE correction and the shit. wire it to deans with a lipo and maybe change the motor and it is good to go.

>>1437505
Trigger contact can be sticky, so get that replaced.
Also hopefully you have a strong back because if you're using it for more than a couple hours it'll start to kick the shit out of you.

>>1437508
>>1437509

Can you change the springs on them or otherwise modify FPS? While pretty much every field around here allows for 400 with .25s, at some milsim events they allow 450 with .25s for machine gunners.

While I know FPS =/= to accuracy or even a better gun it would at least be nice to be able to take full advantage.

File: sumrak_zpsbd51a803.png (660KB, 576x800px) Image search: [Google]

660KB, 576x800px

>>1431299
that's pretty noice

File: sl373098.jpg (3MB, 3072x2304px) Image search: [Google]

3MB, 3072x2304px

My AEG is shooting in fps at the moment, is there a particular type of spring that will allow it to shoot m/s?

File: mmmmmm.png (146KB, 258x249px) Image search: [Google]

146KB, 258x249px

>>1437730

Are drum magazines common or did those die off with the Thompson?

File: KbDCozb.jpg (211KB, 1200x797px) Image search: [Google]

211KB, 1200x797px

>>1437763
In terms of being issued by the military? Yes. After the 50s, issuing the average infantryman anything that held more than 35 rounds fell out of favor.

The only thing close I've ever seen are FSB/MVD troops using drum magazines on AKMs but those aren't that common. The Bizon also uses a helical magazine (basically a drum) but again, it's not that common. There are also pictures of North Korean troops using modified AKs with over folding stocks and helical magazines but we have little to no information on those.

In terms of after market/rebel/militia use they're all over the place. Drums are easiest way to carry more boolet aside from a belt feed system.

>>1437817
Basically I'm wondering more about MG magazines and such. I think the RPK looks pretty sweet with a drum magazine.

File: YugoM72RPK_Catagory_Image_Web_1.jpg (41KB, 700x200px) Image search: [Google]

41KB, 700x200px

>>1437819
There are (technically) only drum mags for the 7.62x39 version of the RPK, the 5.45 versions do have aftermarket variants but they're almost all made in the US.

While it "technically" isn't kosher it's far from improbable that there's some kind of drum similar to the 75 round 7.62x39 that an irregular unit might use.

The Russians were rather adverse to issuing drum mags with the RPK.

>>1437834
I don't think I could even tell the difference between RPK and RPK-74 externally.

>>1437839
Gasblock.
Angle of magazine.

>>1437514
Google

File: 1370623252092.jpg (8KB, 400x481px) Image search: [Google]

8KB, 400x481px

>mfw there's not a single M16A1/A3 itt
>mfw only tacticool slav shit and M4 fagsticks

>>1437900
I have an M16A3 but it's just a stock P&J one with a scope.

>>1437900
I have an XM-177 I need to rebuild, does that count?

>>1437900
Post your NATO then fgt

File: muh magpul.png (578KB, 1260x436px) Image search: [Google]

578KB, 1260x436px

>>1437900
Here =^)

>>1437900
>tripfag complaining about stupid shit
like pottery

File: 3.jpg (3MB, 4128x2322px) Image search: [Google]

3MB, 4128x2322px

>>1437905
>>1437911
Pls do so nigs.

>>1437912
Here you go.

http://imgur.com/a/Dmd4c

>>1437974
>dissipator on a full-length AR-15

D I S G U S T
I
S
G
U
S
T

ITT airsoft confessions

>I like listening to and mostly agree with GMRs thoughts on gear, tactics, and overall airsoft.

>>1437974
>Imgur

Lol these tripfags

>>1437979
>>1437979
I almost always call my hits.

File: 964.png (535KB, 600x450px) Image search: [Google]

535KB, 600x450px

>>1437999

Rate my Airsoft collection

P&J M16A3
G&G M1903A3
WE Browning Hi-power
Cyma AKM
Cyma RPK
Cyma Thompson M1A1
JG G36K
AGM MP-40
AGM STG-44
Dboys K98k
Well Scorpion

>>1438049
Also please be gentle

>>1438049
no japanese/10

>>1438059
Does anyone make Japanese WW2 weapons?

No rate mine.

TM M-14 socom
dboys AKs74u
Double eagle M56dl
Galaxy MP5-k
JP Sig 556
ASG Vz61
WE M9 barry burton custom
S-thunder grenade launcher pistol
Tanaka 8 inch resident evil revolver
Some kind of wingun co2 revolver

>>1438061
Tanaka

>>1438066
I've never seen Tanaka weapons on sale on the pages I go to, or from within the EU at least.

>>1437979
I like my boots because they make me 6 foot 3
Not even a manlet but its addicting

File: when you shit yourself mid game.jpg (127KB, 800x531px) Image search: [Google]

127KB, 800x531px

>>1437900
What? JG, G&G, King Arms, Classic Army, G&P, and probably more at least make an M16A1 or A3.

>>1437979
I don't even play airsoft anymore.

>>1437979
I shot my teammates all the time because I don't truly have one.

>>1437979
I have 12 airsoft guns, 6 different loadouts and I have played two games of airsoft in my life.

>>1438166
If there was ever /asg/ in one post, this would be it.

>>1438166
>have played two games of airsoft in my life
and I thought I played too less per year

>>1438169
I would like to play more, but I'm a fat asshole and I think everyone I meet laughs at me behind my back.

File: I know I must kill.jpg (233KB, 460x688px) Image search: [Google]

233KB, 460x688px

>>1438067
To my knowledge, they've been long out of production. Or maybe they're just rare and stupid expensive (like, 3x the price of a real Type 99 Arisaka).
The cheapest WWII Japanese gun would be a Marushin Nambu and those things have been out of production for a while and are hardly field worthy.

>>1438276
I was just talking about Tanaka weapons in general, but thanks for the info. Japanese weapons aren't really high on my list anyway.

>>1438290
>WW2 guns
>tfw Gunfire has a Forcecore Armaments Italian SMG for sale really cheap
>but no one in Europe stocks it's magazines

>>1438290
Oh. Well Tanaka revolvers are generally sold at either Japanese or Hong-Kong based stores like Impulse101 or Uncompany.
Good luck finding any of their bolt guns though.

>>1438189
Just hit up the gym boss

>>1438327
I would never.

File: 1464820472010.jpg (36KB, 506x404px) Image search: [Google]

36KB, 506x404px

>>1438327
>Implying the Boss of the gym would ever let you beat him

Not an abomination but heres my aug anyway.

File: dscn9398kqqu6.jpg (235KB, 1024x768px) Image search: [Google]

235KB, 1024x768px

>>1438473
now with pic

The 120 dollar MP40 on Evike is really tempting me

>>1438342
Its piss easy if you know the types on his roster or just overlevel your main

>>1438537
it's pretty okay. I'm not sure if I managed to broke hop-up on mine or what, but maybe the range is a little lacking.
Why aren't airsoft guns just rifled?

>>1438547
Because plastic pellets don't expand to engage with any sort of rifling.

File: spm_a261.jpg (116KB, 800x600px) Image search: [Google]

116KB, 800x600px

>>1438547
Tanio Koba experimented with rifled barrels like a decade ago, but rifling is pretty useless in airsoft because the guns lack the pressure to push the bb across rifling like an air rifle.

>>1432576
ohhhhh! "That Gun !"
Fallout 1 and 2. And New Vegas

File: bladerunner_M2019_blaster.jpg (135KB, 700x500px) Image search: [Google]

135KB, 700x500px

>>1438583
That Gun is based off of Deckard's blaster though, ya dingus.

File: Fallout2.jpg (4KB, 251x86px) Image search: [Google]

4KB, 251x86px

>>1438602
Yes you are right. But the original description
from Fallout1 and 2 is basically this>>1432576
here:
In-game description: A .223 rifle modified and cut down to a pistol. This is a one-of-a-kind firearm, obviously made with love and skill.

File: 00d5ff1411fb7a74d43f1deab1a84941.jpg (42KB, 550x377px) Image search: [Google]

42KB, 550x377px

>>1438647
That abomination up there is a hacked off M14 rifle
(7.62x51mm)

The original 2019 LAPD Blaster is an amalgamation of a Steyr .223 bolt-action rifle (top part) and a Charter Arms .44 Special (bottom and blank firing part)

They're literally nothing alike.

File: Steyr-Mannlicher-M--1.jpg (199KB, 1200x742px) Image search: [Google]

199KB, 1200x742px

>>1438684
To be fair, Deckard's blaster and That Gun both use a Steyr .223 rifle a base.

This is more of a /k/, or even /cgl/, thing though.

File: bueno 2.jpg (137KB, 641x534px) Image search: [Google]

137KB, 641x534px

>>1438482
God I love Aug A1s.

File: DSC00232.jpg (339KB, 667x1000px) Image search: [Google]

339KB, 667x1000px

>>1438049
Why not just post a photo?

>>1438766
I don't have anywhere to lay out that many weapons, and it's past midnight so it's dark too.
Maybe tomorrow.

>>1438684
>>1438712
Yes. You are right again. But like I said.
"A .223 rifle modified and cut down to a pistol."
This is the closest you can get in the real live.
P.S.: and yes, I know that the caliber on this >>1432576
is not the same. but it doesn't matter, for me.
P.S.(2):P.S.: if you don't like my answer google this - [ Poe's law ] It's explain why people don't understand expressions on internet.

>>1438790
It's more that my country's government doesn't allow guns.

>>1438802
Why did you reply.

>>1438805
I'm tired and bored.

>>1438808
I, too, am gay.

>>1438806
I get that shitposting is fun, but these threads are one of the few places that are relatively free from /wwe/ shitposting.

>>1438813
I didn't even know this was a thing in /asp/
I regret everything now

File: image.jpg (419KB, 1280x960px) Image search: [Google]

419KB, 1280x960px

>>1437519
Thanks senpai

>>1438786
>P.S
Stop that.

>if you don't like my answer google this - [ Poe's law ] It's explain why people don't understand expressions on internet
That's not what Poe's Law is.

File: image.jpg (369KB, 1280x960px) Image search: [Google]

369KB, 1280x960px

>>1437505
I added a barrel mounted rail on the "gas tube" so I can add a vert grip. That's really all I did. The rail and scope are just there to troll mostly. It does somewhat help in a very wooded area to spot movement farther out.

Out of the box I recommend the following.

1. Make sure all wiring is firmly in place.
>my negative motor wire came off under fire my first time using it.

2.clean all the factory grease out of it
>the stock lube job is beyond horrible
>I recommend 5000 weight RC car diff oil for replacement lube

3. Put a weaker spring in it
>mine came shooting 450 out of the box. Is fine like that if you want it, but a weaker spring will offer a higher rate of fire and overall smoother working

4. Use an RC car 7.4 lipo for most realistic results.
>shoots 660 rpm on a 7.4v with an m120 shs spring. (11.1 in this case does about 20 a second with same spring)

5. Remove the rate or fire adjuster thing
>it's not that useful. It can cause more problems than it's worth.

I don't have a UKARA so my only option to buy a WE Makarov W65U is to pay for it to be sprayed two tone.

Is it worth it or not?

>>1438910
wait, get a ukara, then do it.

Or get a friend with a ukara to buy it for you.

>>1438913
I don't know anyone close with a UKARA nor is getting a UKARA anytime soon gonna happen or be cost effective; what do?

I was thinking I can easily spray over it in Black, surely.

>>1438925
Why is getting one not an option? Underage or just not actually a skirmisher? It really isn't hard to get one.

>>1438929
Never Skirmished but I guess you're right, it probably is best to wait, no matter how long it is.

>>1438891
What motor do you recommend if the stock one shits out?

Is three 40 round magazines enough for semi auto CQB skirmishes with teams of 8 or 10? I don't really want to dump another $50 on just a friggin magazine

>>1439479
They should be. You can always go back to the staging area and top them off again if you have too. It also depends in your style of play.

>>1432011
could I get a version of this without the meme arrow texts and with a red text underneath the ape that says "le elevated tier face"

>>1437974
>fagpul

>>1438327
>going to the gym to lose weight
>not just doing cardio
In airsoft you benefit from cardio way more than the ability to be able to carry a lot of weight pham (unless you want to be able to carry 3 long guns, a tactical shield and an EOD suit)

some guy at my local field had an AEG with a firerate that was nearly HPA-tier. I asked him what parts he's running and he said "Its stock and only has a mos-fet in it".

Seems like bullshit, or maybe the gun was a very good stock gun, but does a mos-fet increase your firerate?

>>1439905
>mfw I've been calling out for shooting full-auto on a semi-only CQB
>mfw I was using semi the whole time, just lipo+mosfet
Some stock guns shoot nicer than others

File: 141017082501764190225_P1050782.jpg (591KB, 3264x2448px) Image search: [Google]

591KB, 3264x2448px

>What are your favourite guns purely based on aesthetics, /asg/?

1. Type 89
2. 1911
3. Sig 550
4. AK-74M
5. SVD

M16A3 narrowly missed my list, but for me the whole AR15 platform looks a bit too much like a 1950s space-gun.

>ordinary weekend skirmish games
>assaulting a village made out of plywood "houses"
>enemy airsofters keep leaning out for long periods of time because they think that no-one is within AEG range
>aim a bit higher to compensate for the distance and my gun being shit
>eliminate atleast 5 guys from the village by firing at them from our spawn with my stock SRC M4


>>1439910
His gun was a SCAR so I guess it might have been a really nice stock gun since the companies that make SCARS tend to make good guns, right?

File: 1.jpg (109KB, 1024x683px) Image search: [Google]

109KB, 1024x683px

>>1439911
Marushin Mateba without a doubt, since there's like only three real 2006Ms in the US.

File: tumblr_n7tjxdw08N1rvhbxso1_1280.jpg (163KB, 960x495px) Image search: [Google]

163KB, 960x495px

>>1439673
There is LITERALLY nothing wrong with MagPul.

>>1438890
like I said : people don't understand expressions on internet.
this was an expression >>1438583
it's remind me of "That Gun !"
but you are baiting on the words and forgetting the meaning (the expressions)
like with the "Poe's Law"- it's not just about the CP or sjw issues. it's about to: "distinguish extremism from satire of extremism on the Internet unless the author clearly indicates his/her intent."
in this case- expressions, from one side. and the pointless "extremism" to be accurate on the other side.
P.S.: by examining your posts, I may go to the conclusion that you have very huge super-ego.

>>1440026
There's literally everything wrong with magpul

File: 1.jpg (41KB, 514x536px) Image search: [Google]

41KB, 514x536px

>>1440034
You okay mate?

Is there any benefit in using a short 4x32 scope on a non-sniper AEG? I saw one for cheap at a local airsoft retailer's online store and was thinking of grabbing one.

>>1439905
probably had a nice high torque motor, mosfet and 11.1v in there

>>1440160
You mean high RPM, right? High RPM = high fire rate. High torque = high FPS

File: Newfurniture.png (1MB, 1419x613px) Image search: [Google]

1MB, 1419x613px

>>1440037
Matching Magpul with Magpul looks perfectly fine. You have to go all the way though.

>>1440162
Motors impact FPS very little. High torques have more strength like their name implies and thus pull the cylinder back faster, resulting in a snappier trigger response.

>>1440163
Absolutely disgusting

>>1440171
We'll just have to disagree about magpul then my friend

>>1439911
1. Kar 98k
2. STG-44
3. Luger P08
4. Broomhandle Mauser
5. AKM

>>1439911
Vikhr
Mp40
Thompson in GI configuration (No angled grip/drum mag)
pp2000
AK12 (Will grab one for my Rusfor impression once an airsoft one comes out inevitably)

>>1439905
Dual Sector Gear literally gives you two times more RPS.

>>1440162
>High torque = high FPS
completely wrong: you can use high torque motors to pull a stronger spring (more FPS) but with the same spring you will get better trigger response

What headgear does /asg/ wear? I use a flecktarn bandana.

>>1440265
I have a repro Stahlhelm, M1 Helmet, some Russian steel helmet, DDR steel helmet, a flecktarn boonie hat and a multicamo boonie hat.

am I the only one who grabs their gun from the middle with their hand when sprinting?

>>1440265
2 caps, a bandana I wear over my head, an israeli flak helmet I've worn a couple times. I plan on getting a surplus MICH 2000 sometime too as repro helmets always feel too flimsy.

>>1440271
AKs are practically designed to grip by the part where the mag and the receiver meets when running. Also it prevents you from falling on your gun as easily if its by your side.

>>1440055
See>>1438891

>>1440055
They only work well if your gun has effective ranges beyond 200 feet. At that point they're mostly used to guide in shots.

>>1440265
Baseball cap, peltor earpros, Z-tactical bowman, and a half-mask which is supported by the peltors.
I'm wondering if I should remove the bowman and use a pear shaped microphone-speaker instead. One less cable to worry about and I can always connect the pear to the peltors if I need sneaki breeki.

File: asgicon.png (142KB, 618x618px) Image search: [Google]

142KB, 618x618px

Made a discord as an alternative to Skype.

https://discord.gg/tZdrjwz

I'll keep posting it every thread. If the next OP maker wouldn't mind sticking it in the op as well.

>>1440387
it also gives me the benefit of not having to repeat everything I hear on the radio to the guys that don't have any.

>>1440265
Black patrol helmet for police loadout. Multicam bucket hat for woodlands/scrub

>>1439911
AKM
P90
MG42

Maybe I have pleb taste

>>1439911
1. MP7
2. MP5 (any SEF grip)
3. AKS-74u
4. Glock 17

>>1439911
Vanilla/10

>>1440023
Supreme gentleman.

>>1440204
Wehraboo.

>>1440208
Brutalist.

>>1440416
I fail to detect a common thread.

>>1439911
1. F2000
2. MK23
3. L96
4. MG3
5. MP5K
I own first two, I'm working on a budget to include last three to my list, though MG3 might be tricky so I'll probably stick to MG36 or M60.

File: AMD 65 MagPul'd.jpg (278KB, 1888x1119px) Image search: [Google]

278KB, 1888x1119px

>>1440037
MagPul is fine.

Look at this AMD, vastly improved.

>>1440163
>>1440464
Magpul furniture generally looks out of place, both the AR15 and AK platforms were designed over 50 years ago, whilst Magpul products are consciously designed to look modern.

It's like putting rims, spoiler etc. on an old Lada; kind of funny looking.

>>1440271
Nope, I do the same thing

File: AMD 63.png (192KB, 580x382px) Image search: [Google]

192KB, 580x382px

>>1440493
I disagree.

Also on an AMD they're a vast improvement since the metal handguard will burn your hands on the real one.

Anyone know anything about this gat?
http://www.redwolfairsoft.com/redwolf/airsoft/AEG_AEP_ICS_ICS_CXP_APE_AEG_Black.htm

Looks like a nice notacr that is not a piece of potmetal from A&K

>>1440390
joined

>>1440687
ICS internals aren't 100% compatible with TM, you'll find a lot of aftermarket stuff won't fit, both internal and external.

>>1440055
If your bbgat isn't utter shit there is. I bought a chink Acog and I consider it one of my best airsoft purchases.

How long does a 1,200 mah 9,6v battery last on average?

>>1440871
Not long enough, get an 8.4v or 11.1v LiPo.

Seriously NiMH are a 90's technology and they need to please go.

>>1440906
I don't need a LiPo, I need to know how long the battery I got lasts for.

>>1440871
A morning, maybe.

>>1440914
>I don't need a lipo
Poorfags lmao

>>1440915
what's that in hours? 4? 6?

>>1440931
It depends on how many shots you shoot, dingus

>>1440931
Depends how much you're going to be shooting. Mine lasted maybe two. Two of them was not enough for a day.

Rough estimate: 1-1.5k shots. Dense woodland is not friendly to the single shot mentality.
Two 1400mah 7.4 lipos is enough for a day. Buy decent batteries, friend.

(Please tell me you're not thinking about actually using the stock battery that comes with your gun)

>>1440947
>on average
I have a Cyma RPK and it has a very weirdly shaped battery container, pretty much forcing me to use their little weirdly shaped battery that came with it.
>>1440956
I'll buy more expensive batteries when I start playing enough airsoft to warrant it. I have one 9,6v 1600 mah 8-fields battery and like a dozen spare 1200 mahs, but I've never had a moment when I've had to change a battery mid-game.

>>1436118
G&P because it has great internals out of the box and it's TM Compatable so you can easily find replacement/upgrade parts

>>1440965
Be VERY careful with that 8fields battery.

If you have access to a voltmeter, test it. Mine (9.6, 2000mah) clocked in at near enough 11 volts, which did not do my trigger contacts any good at all.

>>1440265
A built up skate helmet, a slavhelm, a boonie, or a beanie, depending on a few things. Mostly on how much shit I want to wear, the weather, and if I need/want a themed kit.

>>1440978
Fuck.

File: 20160326_163403.jpg (2MB, 2000x1125px) Image search: [Google]

2MB, 2000x1125px

>>1440023
>tfw mine is broke and missing parts
Oh well maybe I can find a collector to sell it to so they have backup parts for most of their gun.
>>1440265
An uncomfortable paintball mask, a shemagh, and an oper8or hat

>>1441095
If I knew where to get parts I would buy it off of you, but I don't know if Marushin even considered making spares.

>>1441122
It's possible you could order them direct but I don't know of any retailer selling spares. I just wanna sell this off and hope there's another re-release of them again some day.

>>1440920
More like people who don't want to own a firebomb

>>1440871
Enough for your average day of skirmishing, which is around 7-8 hours.

New thread?

>>1441143
>I just wanna sell this off and hope there's another re-release of them again some day.
I've been asking numerous retailers about this for months now and all I ever get back is "Sign up for our mailing list to find out when it comes back in stock!", which tells me that the last run was the X-Cartridge versions back in December.

File: 1335942957297.jpg (83KB, 800x770px) Image search: [Google]

83KB, 800x770px

>>1441171
Such is life in the airsoft world. I thought they were gone for good then fall 2014 they all just came back out of nowhere.

>>1440439
>Brutalist
You got me

who sc village here

>>1441144
More like irresponsible poorfags lmao

>>1441144
U wot m8?
You probably carry a firebomb in your pocket everyday by that logic.

Who here /Berget/ this year?

>>1439911
>AK104
>STG-44
>G3
>PKP
>Most Glocks

>>1440978
You obviously dont understand how batteries work.
1.2 is the NOMINAL cell voltage for NiMH, basically the middle.
1.4~1.5 is the MAX cell voltage for NiMH.

Your 8 cell battery has a NOMINAL voltage of 9.2v and a MAX voltage of 12~ when fully charged.

What you have there is a fully charged battery.

>>1441420
And a fucked set of trigger contacts.

>>1441423
Shouldn't fuck trigger contacts that bad. Just take the gearbox apart and clean off the soot deposits.

>>1441426
And the bits of melted plastic.

>>1441423
You don't have a fuse or MOSFET?

>>1441435
I've been using LiPo (even 11.1v sometimes) on replicas without mosfet for over a year and the trigger contacts are as good as new. You're full of shit

>>1441440
fuse, no fet. Stock contacts.

>>1441435
You've got current issues, not voltage issues if your trigger contacts are melting.

>>1441440
>fuse helping againts burnt contacts

goddamn, we have ASF tier armchair science going on here

>>1441490
I swapped gearbox entirely after the third set.

>>1441513
Just... Just get a mosfet man.. .Not even an expensive one, just one to protect your contacts.

Who /Berget/ this year here?

>>1441568
I did.

It burnt out.

>>1441575
A man can wish

>>1441588
I give up. You're obviously pulling shit out your ass at this point and I'm not sure exactly why...

>>1441599
I had a jefftrom fet. It went weird, would quarter cycle with every trigger pull, then it melted it's heatshrink off and failed.

>>1441596
It was good. Save and go next year?

>>1441610
I think there are some anons planning to go to some European event in 2018

>>1441622
Yeah, the Skype group are planning for Border War 2k18

File: Picture 10.jpg (449KB, 2029x2497px) Image search: [Google]

449KB, 2029x2497px

>>1441622
We Border War 2018.