WIP - Work In Progress General

File: IMG_20170724_2059273_rewind.jpg (1MB, 3200x1800px) Image search: [Google]

1MB, 3200x1800px

R8 my set up

File: Untitled.jpg (1MB, 2916x2568px) Image search: [Google]

1MB, 2916x2568px

I had visions of a glorious dawn banner and tried to make one.
Put the first coat down so far, should I keep going or start over?

>>54508208
Guard?

>>54508208
>poorfag/10

What army are you painting anon?

File: Path to Enlightenment.png (2MB, 1260x910px) Image search: [Google]

2MB, 1260x910px

Now that I had a few days to sit down, I was able to slap together the 3d-printed terrain I had been working on. I actually needed to cut a new base out for the Path to Enlightenment, since the one I ordered ended up being too small. Luckily the tools and material were cheap, and everything turned out well. The Path to Enlightenment is not a perfect 1-1 representation due to freecad limitations and the limits of my own skill, but it gets the point across. 7"x7" base, and it fits almost perfectly.

>>54508232
So long as the middle bits get cleaned up as you go, I really like the colors so far. Just too much grey in between the colors, but as I've never painted something like this I don't know if that's normal at this point or not.

>>54508242
look to >>54508238

File: Plasma Generator.png (1MB, 1110x910px) Image search: [Google]

1MB, 1110x910px

>>54508247

And finally the Plasma Generator. The acrylic rod in the center looks a lot brighter blue when light is shining directly into it. It was the best I could do since I couldn't find a perfectly teal/turquoise transparent acrylic rod. Not a 1-1 representation once again, but it's clear what it is, at least. I think some of the sizing regarding the base compared to the top may be a bit off, but it looks close enough. I was looking forward to this one most of all. Maybe I'll make another one day, to have two or three. Unlike the other one, I can actually use these as Haemotrope reactors, since the people at the local store look at you funny if you suggest custom rules.

>>54508308
Aside from sanding what else are you using to finish the prints?

File: IMG_1766[1].jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

Rate my Bullgryn, was the first time ive got eyes done correctly.

All other times i've tried its made them look like they just witnessed their best friend get turned into a cloud of red mist.

File: 0724172022a.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>54508208
We doing r8s now? Fuck my shit up,/tg/

The unlabeled ones are from the basic gw modeling kit.

File: IMG_1767[1].jpg (987KB, 2592x1936px) Image search: [Google]

987KB, 2592x1936px

>>54508362

>>54508381
Needs wash

>>54508354

I tried sanding it, actually. The material is quite tough, and wasn't taking to it well. Low grit sandpaper was just scratching and damaging them, while high grit wasn't having much of an effect at all. I actually got most of the layers out, but some were either too tough or in too small a place to sand down. I don't like some of the layers that got through, but it used to be far worse.

>>54508393
on everything or the armour? because i have done a light wash on the pants with some deeper recess shading

>>54508247

>phoneposter
>tripfag
>unthinned paints

Everything checks out, does it come as a package?

>>54508393
additionally the lighting i have is not very kind, and by not very kind i mean its a computer screen on a white webpage.

>>54508368
Ultramarines/10

>>54508412
If you want the armor to look newer, then only on the skin.

>>54508454
what do you recommend? some light Agrax or reikland over it all, because i have done some deeper reikland shading, but it does not show up well, but its enough to easily define the muscle

>>54508409
You did a good job. I figured you were using some of that filler goop they sell to smooth them out.

Has anyone tried shading Ultramarines/Crimson fists/any blue chapter with Drakenhoff Nightshade or another deep blue, rather than Nuln oil? Want to see how it looks, but I don't want to spend $10 on a shader I'll never use again if it doesn't look good.

File: 99189956002_TECHNICAL2016LahmianMedium01.jpg (31KB, 600x620px) Image search: [Google]

31KB, 600x620px

Literally what does this even do?

>>54508381
show me that guard with that big ol gun

File: 2017-07-24 18.35.25.jpg (884KB, 942x1055px) Image search: [Google]

884KB, 942x1055px

CRISP

>>54508519
>Do not use the side of my shoulderpad as a step
lol k

>>54508514
thins paint color without ruining the consistancy, because its just paint without pigment

>>54508514
Literally google Lahmian and choose the first result

>>54508495

Filler goop? What is this? I'm still new to getting stuff sent out for 3d printing, so anything that gets rid of those fucking ridges sounds helpful.

File: IMG_1768[1].jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

>>54508516
its my first ever conversion, done around july of last year, after being in the hobby only like, 4 months. its a heavy stubber off of a stormlord kit since i built it as a baneblade.

made him since the local GW manager runs a loyalty point system and makes custom datasheets for loyalty points.

>>54508562
kinda reminds me of the marines from aliens with those guns on the harness's. i dig it

>>54508575
i originally planned for the squad to be done up in a kinda Starship Troopers colourscheme.So this dude is of course called Rico.

>>54508544
https://www.smooth-on.com/product-line/xtc-3d/

I ordered some but don't have it yet so can't vouch for how well it works.

File: 1500823511971.jpg (476KB, 1184x2006px) Image search: [Google]

476KB, 1184x2006px

If the person who painted this guy is around, what colors did you use for the armor? I really like this shade of pale earthy green.

In absolute absence of Ogryn Camo, what would be an adeguate alternative for highlight the plague marines?

File: IMG_4147.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

Scored 40 shootas off ebay, ork army getting nearly done now

File: GWpls.jpg (49KB, 600x300px) Image search: [Google]

49KB, 600x300px

GW knew what they were doing. Look at the gun for christ's sake.

I know what must be done.

File: 1500941375451.jpg (50KB, 513x476px) Image search: [Google]

50KB, 513x476px

>>54508892
>DIE DIE DIE

>>54508892
GW ripping blizzard off, the irony.

File: 1498662605128.gif (518KB, 500x715px) Image search: [Google]

518KB, 500x715px

>>54508519
>Hazard stripes are also on the trim

>>54508892
thats clearly the lawmaker gun from judge dredd. come on guys

Winsor & Newton Series 7 users, do you use the normal or miniature versions?
Which sizes do you use and for what task?

>>54508697
I use Nurgling Green.

>>54509532
I prefer the normal sized versions, size 2 for basecoating, size 1 for literally everything else

>>54508644
Looks like Steel Legion Drab with Agrax Earthshade to me

>>54509424
I'm contemplating calling the number for customer support

>>54509551
Alright thanks.
I'm getting the vibe that a 1,2, and 3 will do pretty much everything I'll need including large model painting. But I think I'd be even fine with just a 1 and 2.
Do you think I'd need anything in particular for T'au models?

>>54508892
is the new GW sculptor a blizzard fanboy or something? all the new primaris shit looks like it was stolen straight from starcraft 2

>>54508519
No it isnt, the golden parts are painted over.

File: grenade-guard.jpg (3MB, 2365x2613px) Image search: [Google]

3MB, 2365x2613px

My 7th guard

File: plasma-guard.jpg (939KB, 1091x1403px) Image search: [Google]

939KB, 1091x1403px

>>54509847
Another one

File: wat.png (632KB, 1705x794px) Image search: [Google]

632KB, 1705x794px

What the fuck are these...
Who thought this was ok.

File: screaming.jpg (73KB, 476x349px) Image search: [Google]

73KB, 476x349px

>>54509915
>click pic expecting THICC
>see tallboyz

zog me

File: leg-days.jpg (234KB, 660x958px) Image search: [Google]

234KB, 660x958px

>>54509915

>>54509847
>>54509865
pretty good, needs some highlights on the armor and maybe on the most raised parts of the fatigues. Otherwise they're coming along nicely.

tips for putting down gold easily?

>>54510037
let go of your hand slowly and gently place it on your surface of choice

Anybody wanna share their Sylvaneth armies for inspiration?

>>54509972
Thanks lad. Any suggestion for the paints I should use for those highlights ?

File: Well Played.gif (1MB, 490x480px) Image search: [Google]

1MB, 490x480px

>>54510052
For real though

File: Sylvaneth.jpg (148KB, 1572x1479px) Image search: [Google]

148KB, 1572x1479px

>>54510076
I basecoat any area i'm painting with brown and then work up from that.
Retributor Armour is a decent paint for working on gold apparently, I've never used it so I can't comment

>>54510053
I've not done much but here's my sylvaneth

>>54510070
Ushabti bone for the fatigues, and maybe Eshin grey on the edges of the armor. I use London Grey from the Vallejo paint line for edge highlighting my black, so I don't know if you wanted GW paints or not.

>>54510037
What exactly do you mean by put down?

I apply it like any other paint and it works fine.

>>54510180
Brown? Really?

>>54510245
It's a neutral color that works better than grey with warmer colors.

>>54510245
Most gold paints contain red which works well with brown.

>>54510264
>>54510279
I learned a thing.

File: 2017-07-24 20.41.20.jpg (513KB, 772x1057px) Image search: [Google]

513KB, 772x1057px

>>54509259
Obviously it isnt done yet you double nigger

>>54510368
Damn that's looking good

File: 20170724_231012_1500952213088.jpg (551KB, 2560x1440px) Image search: [Google]

551KB, 2560x1440px

My friend is giving me pic related, and I'm thinking about converting them into Incubi. Any thoughts?

>>54510187
I'll try that. I use GW stuff because I don't really know other brands. What are the advantages ?

>>54510368
there was no indication of you not being done with that post. All you said was "Crisp"

Also, obviously it's not done, if someone came up to me with this and said it was done I would tell them that they are very wrong, and to get back to work.

>>54510408
price

>>54510417
Like I would go through all that trouble to mask all the stripes out and airbrush everything then just leave the trim all fucked

File: 100_1369.jpg (360KB, 1152x1671px) Image search: [Google]

360KB, 1152x1671px

After getting this guy's box the day it came out I just painted him, and now I want to start an Eldar army just to use him this model is sexy.
The closeup makes the paint look a bit thick but it's better irl, it was done pretty thinly

>>54510450
you're the one who called it Crisp

>>54510463
I meant the hazard stripes

crisp doesnt really indicate a level of doneness

>>54510368
>you can tell from the way I use my walk I'm a woman's man, no time to talk

>>54510471
It also doesn't indicate an implication to move forward. A vague statement on the internet will never bring across your full intentions, so you should always be prepared for people to misinterpret it.

>>54508186
i always marvel at how detailed that mini mini-marine is.

>>54510525
which one?

>>54508519
no one noticed that the 2 shoulder pads are on the same side?

>>54510557
That was on purpose so I could have both hazard stripes and an aquila transfer facing forward

File: IMG_20170720_2222068.jpg (5MB, 3672x4896px) Image search: [Google]

5MB, 3672x4896px

Progress on thunderbolt. Converted missing pieces and put plasticard in for Windows as I'm missing the cockpit. I'm using old fleshwash ink to match the rest of the army, and using grey for the underside. Wondering what kind of insignia and markings to put on it. Sorry for big pic

>>54510368
Kind of flat, needs highlighting but otherwise coming along nicely.

File: IMG_20170720_2222168.jpg (5MB, 3672x4896px) Image search: [Google]

5MB, 3672x4896px

Grey underside needs cleaning up, wash got a little out of control

File: IMG_20170720_2221254.jpg (4MB, 4896x3672px) Image search: [Google]

4MB, 4896x3672px

Still needs details. Previous paintjob refused the simplegreen treatment so I just said fuck it and resprayed in army painter desert yellow

>>54510682
>>54510612
>>54510582
Nice, getting that Afrika Korps vibe

>>54510578
so why make 2 right shoulder pads?

>>54510541
the one in hand. because he would've had to affix it without damaging it.

File: johnny.jpg (395KB, 1162x1427px) Image search: [Google]

395KB, 1162x1427px

>>54510794
That's photoshopped in

File: 121289-Humor, Painting, Space Marines, Ultramarines.jpg (70KB, 482x500px) Image search: [Google]

70KB, 482x500px

>>54510794
>>54510827
This is the original image

>>54510839
i've seen both, and my point remains the same

>>54510866
I'm not sure what the scale is but it looks like whoever made it put a lot of effort into it.

>>54510180
Those are some hype sylvs.
How'd you do that bark? Basecoat of black then coral white with some nuln oil?

>>54510884
i still haven't found the original without the radio photo shopped in.

File: IMG_20161125_1026082.jpg (5MB, 4896x3672px) Image search: [Google]

5MB, 4896x3672px

>>54510736
Part of my Tallarn/solar aux force. Glad you like it, been rocking that camo scheme for over a decade

>>54510916
rakarth flesh base, agrax wash and then I use many many coats of P3 Menoth white highlight

File: PaintMarine.jpg (93KB, 482x500px) Image search: [Google]

93KB, 482x500px

>>54510933
Does this help?

>>54510983
Those dudes are cool, third party or conversion?

>>54510994
yes... yeeeeeeeeeess

File: 1029151630.jpg (573KB, 2048x1536px) Image search: [Google]

573KB, 2048x1536px

>>54510983
More shots of tanks

>>54511004
Solar auxilia lasrifle infantry tercio from Fw

>>54511069
ah, thanks.

I need to magnetize marine shoulderpads, how do you recommend doing so? What size magnets, and also what sized magnets for the weapon arms on scouts?

>>54510983
>>54511056
Nice

>>54511056
round turrets make me happy

Has anybody here ever shaded the skin of their minis green? And I don't mean Orks, I mean otherwise normal human/elves with a greenish tinge to them. How did you do it? How did it turn out? Is there a way to make it look like not-scurvy?

File: 20170724_234131.jpg (4MB, 4032x3024px) Image search: [Google]

4MB, 4032x3024px

This is an rough concept of an Ork generator a friend is to trying to sell me on. Is he on to something, or not at all?

>>54511236
Sorry for the sideways image.

Hey guys I need some advice. I've been looking at doing some custom count's as conversion for an army I'm building, and I want to do some large Chainfists on a walker. Any suggestions on how to go about converting powerfists into chain fists? Any idea where i could get some guides for something like that?

>>54511270
Ironclad dreadnoughts come with chainfists, you could try to incorporate those somehow.

File: 5242280-0074614980-latest[1].png (2MB, 1366x768px) Image search: [Google]

2MB, 1366x768px

>>54508892
If GW is ripping off anything, it's most certainly not some faggy blizzshit.
Not like Overlord is much better though.

>>54508514
You can make any paint you want into a wash or glaze.

it saves you when you don't want to buy washes you would barely ever use. like I wanted to orange plasma coils but I had no use for orange glaze other than that. So I did troll slayer orange and Lahaina medium and saved myself 5 bucks.

File: daboyz2.png (887KB, 908x423px) Image search: [Google]

887KB, 908x423px

life got complicated, progress slowed down to a halt for a few months... but i'm back on the wagon! some WIP boyz and the beginnings of an ammo runt

>>54511706
I'm liking them a lot already anon.

File: sistersproject3-1024x720.jpg (105KB, 1024x720px) Image search: [Google]

105KB, 1024x720px

>>54511294

I was thinking of doing something similar to these and then counting them as penitent engines, with the flamers slung under chain fists on each side and some baroque bits thrown on. Good idea you think? Or should I just get actual penitent engines?

File: daboyz.png (500KB, 610x441px) Image search: [Google]

500KB, 610x441px

>>54511706
here are 2 finished lads to show how far i've yet to go
i must have a masochistic streak to put this much effort into hordes

Hey guys I didn't know where else to go but here for this question:

Are there any GW minis I could make into a Monk character? Or perhaps I could mix a few sets to make a good looking monk. I'm not having good luck finding anything so far.

>>54511991

When you say monk do you mean like a Buddhist monk or more European looking? And are we talking real monk or like monk from dnd?

File: 20170724_185843.jpg (476KB, 1803x1014px) Image search: [Google]

476KB, 1803x1014px

BULLgryn-anon with another update.

I've successfully attached all the hands to their weapons. There was some hassle making sure the angle of the wrist was correct for the intended pose (there's three, since the three models in a minotaur kit are all different) but it seems to have worked out.

Tomorrow I'll trim the greenstuff, reinforce the joints with glue and see what I can do about that knurled texture on the grip. I have a few ideas for hand-texturing greenstuff. I hope it works.

I need to get back into painting my backlog. It's been a good year now, but mustering that drive to just start up again is eluding me.

>>54512021
Dnd/pathfinder monk

File: 20170724_205409-2268x2268.jpg (770KB, 2268x2268px) Image search: [Google]

770KB, 2268x2268px

Holy fuck why haven't I been using one of these all along. So much easier on my eyes and back.

>>54512199
Oh sorry, and more like a buddhist monk. Unless that makes it tougher then either works.

File: poxwalker1_v1_cc.jpg (111KB, 700x900px) Image search: [Google]

111KB, 700x900px

Are the things inside him supposed to be giant maggots? I kinda liked the idea of him growing weird tentacles / being a tiny portal to horrible gribblies.

File: 2017-07-25 01.57.53.jpg (323KB, 1885x1060px) Image search: [Google]

323KB, 1885x1060px

Nearly finished the hellblasters.

File: IMG-5518.jpg (2MB, 3264x2236px) Image search: [Google]

2MB, 3264x2236px

>>54508208

>>54508519

>CRISP

>Fuzzy edges and overspray

Okay buddy.

>>54512218

Because the alteration of depth perception messes with hand-eye coordination

>>54512270
>anon finally emerges from his room.jpg

I love that the belly things and the shoulder things are colored the same. Makes me imagine them waving around instead of being just differently colored, stiff horns.

File: 2017-07-25 02.09.46.jpg (236KB, 1182x1344px) Image search: [Google]

236KB, 1182x1344px

First of many renegade cultists.

File: 2017-07-25 02.18.55.jpg (572KB, 1904x2085px) Image search: [Google]

572KB, 1904x2085px

With his best friend, Big Mitch.

How should I go about "40king" the Savage Boyz, Ard Boyz, and Orruk Brutes I'm getting over the next week

File: IMG_20170724_232751.jpg (3MB, 3984x2988px) Image search: [Google]

3MB, 3984x2988px

AAAAAHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH[?spoiler].

>>54512397

Slap gubbinz on them for the most part. If you just swap out their weapons and add 40k ork bits i think that would be plenty honestly. Maybe file off some of the tribal stuff for the savage boyz. Honestly I don't know why more people don't use the AoS models for orks.

>>54511236
6/10

>>54512406
>painting on the sprue
YAMERO

File: IMG_20170724_234404.jpg (4MB, 3984x2988px) Image search: [Google]

4MB, 3984x2988px

>>54512546
I don't know what that means but brah it's so much easier

>>54512560
Oh honey, no...

File: IMG_20170626_212149.jpg (3MB, 3984x2988px) Image search: [Google]

3MB, 3984x2988px

>>54512605
Sweetie

>>54512560
What can men do against such terrible horrors

File: Untitled.jpg (231KB, 697x1033px) Image search: [Google]

231KB, 697x1033px

>>54508232
second coat. Picture shows me grey areas near the scroll I need to get.
>>54508251
Thanks

File: wip question.jpg (42KB, 652x242px) Image search: [Google]

42KB, 652x242px

Hey WIP, do you think it would be possible to get flamers in where there are normally missiles on the centurions? And do you think it would look alright? I've never worked with centurions before and no one i know has any so i don't know about their sizing, but i'm curious.

File: img5937f48f08ed4.jpg (643KB, 900x3312px) Image search: [Google]

643KB, 900x3312px

>>54512560
>>54512605
>>54512627
>>54512546
>>54512406

you're gonna need to try a bit harder...

File: 1468216826332.jpg (57KB, 468x414px) Image search: [Google]

57KB, 468x414px

>>54512799

File: PANIC.gif (2MB, 300x169px) Image search: [Google]

2MB, 300x169px

>>54512799
>that paint job
>ruining it with sprue bits left over

>>54508629
I would actually rather use this: http://www.rustoleum.com/product-catalog/consumer-brands/auto/primers/filler-primer-spray since the xtc is apparently rather a sealant. i guess you want to paint your models since this is WIP and therefore this is the stuff i use. I lean the prints with isopropanol since some filaments have additives in it which let the spray dont bond, then just spray the model and sand it smooth. Afterwards clean it with pressurised air if available. Depending on the layer height you might want to smooth it chemically before everything else but that is another endless hole of possibilities and depends on your material.

>>54510389

Anyone with a thought to add?

File: 99120212011_GarnethExecutionersNEW01.jpg (44KB, 600x620px) Image search: [Google]

44KB, 600x620px

>>54510389
These guys would work better

File: bador.jpg (111KB, 960x1280px) Image search: [Google]

111KB, 960x1280px

Finished this fucker off in a day.

>>54512847
>>54512811
it was intentional, the person did it as a project, not as something to assemble later.

>>54512949
>converting plate/chainmailed spearmen with open helmets into masked Landsknechts in spiny banded mail
Good luck?

>>54512949

If your getting them as a gift you really have nothing to loose, so you might as well have fun with em and go crazy. I look forward to seeing what you do. It's not gonna be easy, but i'm sure you can do something with them if you get creative.

>>54512847

Nigga he did hella freehands on the sprue itself. He's never unclipping that. HE'S GONE FULL META

>>54512780

Very much doubt it. I found those chest weapons to be infuriating to work with even with the shit that was designed for them. Plus they're much too small.

Sorry you can't make your flaming nipple idiot-bot.

>>54512627

You have the basics down pretty well, actually...but...jesus, did you even prime these?

>>54513082

>flaming nipple idtion-bot

When you put it that way I'm kinda glad it won't work out. Just looking for somewhere to stick flamers on the damn thing if there's no room on the arms. Somehow shoulder mounts just don't seem the way to go.

File: 1366243693246.gif (846KB, 245x194px) Image search: [Google]

846KB, 245x194px

>>54508186
Would a primaris marine without its power pack look weird?

>>54513096

Why would you build it without it's powerpack?

File: princey.jpg (91KB, 1280x960px) Image search: [Google]

91KB, 1280x960px

>>54513095

just model him with a lizardman head and say he breathes fire.

If anyone gives you shit, show him your massive file of personally made fluff on your custom chapter, complete with several thousand dollars of commissioned artwork

>>54513011

Hrm. Damn. You're totally right. Still, I'm getting the others for free. I figured I can use the bodies and pick up something else for the great.

>>54513043

Yea. I'll have to dig around my old WE bits and see what I can mix and match into something.

How the fuck do I stop my brushes from splitting?

I try my best to not let the paint get far up in it and regularly clear them but two or 3 models and boom it's split again and I can't do any details on the rest of my models.

What do you /wip/ use to brush?

Quick question, how retarded would a flamer look if the tube feeding the flamer went up from the tank rather than hanging from the bottom?

>>54513342
Didn't I meet you in Burlington?

>>54513019
Not Chaotic Enough.
All 4 gods are displeased.

>>54513342
>not making the horn tips bloody as well
Missed opportunity. Sick paint job tho.

File: 25072017_034314.jpg (101KB, 1080x1080px) Image search: [Google]

101KB, 1080x1080px

Stergard veteran) My crimson first ) last work

How would one achieve the green energy glow that Necrons get, but with a orange as the main colour instead? I know that the green process is Caliban Green>Warpstone Glow and the Moot green for highlights.

Does anyone have a process for paint orange energy?

File: ammorunt.png (540KB, 523x470px) Image search: [Google]

540KB, 523x470px

ammo runt update. tying to speed up the process a bit, still a wip

>>54508232
>>54508247
>>54508308
awesome

>>54513884
What did you use to make that hand? Looks pretty real.

File: IMG_20170725_024417221.jpg (4MB, 3006x5344px) Image search: [Google]

4MB, 3006x5344px

>>54513342
Got pretty far today only thing left is scythe and the base
Nice job on the Lord of contagion tho I look forward to doing mine but I'ma do the same color pattern as my typhus

>>54514299
Real human beans

>>54508644
I really want to see a Primaris painted with the old 'Eavy Metal Kasrkin scheme.

Im really tempted to go out and get a squad but I can't justify a squad i'd never use.

>>54514457
Then buy the 3 man easy to build kit. Use one for your color scheme, one for the johnny conversion, and whatever for the third. Make him a corpse on a base or something.

File: 20354162_10154877873718505_2074599219_o.jpg (166KB, 1440x1920px) Image search: [Google]

166KB, 1440x1920px

so i woke up and saw that i could wash over this to get better results and to blend the colours, but im thinking on using agrax earthshade or even drakenhoff nightshade for it, and i dont know about the ratios of using it over this, 1:1, 1:2 or just from the can, any suggestion?

i like how they look, like a stone armor, but its kinda silly kletting em be like this

File: MOLDIV.jpg (944KB, 1280x2560px) Image search: [Google]

944KB, 1280x2560px

Finished the main part of my first Plague Marine as a bit of a proof of concept, pretty pleased with the overall look. Group shot included to compare to existing. I wanted the DG colour scheme to be cold and desaturated to contrast with the bright daemons. C&c very welcome.

>>54514336
I'm enjoying your painting style, looks really characterful. The colour palette, textures and gradients put me in mind of stuff like Quake 1. The only thing I would suggest is bringing up some of the black areas to dark shades rather than flat black.

>>54513946
Personally I'd go

>Jokero Orange
>Troll Slayer Orange
>Shade with Fuegan Orange
>Highlight Yriel Yellow

File: Mari.jpg (239KB, 1044x770px) Image search: [Google]

239KB, 1044x770px

>>54514768
>taste the rainbow!
>puke the rainbow!
Looks good.

>>54512742
Very cool!

>>54510779
To be righteous as fuck

File: 99689987043_ImperialSpaceMarine03[1].jpg (43KB, 600x620px) Image search: [Google]

43KB, 600x620px

>>54510827
You're showing your age. The model on his hand (and the ones on his desk) are the old Epic scale space marines (6mm scale). The painter is (I'm assuming) the space marine statuette from FW that's been very heavily chopped up and re positioned, with a new head sculpted.

File: P7250247.jpg (871KB, 1920x1280px) Image search: [Google]

871KB, 1920x1280px

>>54509847

From one newbie to another, looks good!

>>54508514
It's an acrylic flow improver. You can buy bottles of the stuff from artists supply shops for a much lower price.

File: IMG_20170725_221354.jpg (733KB, 1600x1200px) Image search: [Google]

733KB, 1600x1200px

>>54513946
I use the same paints >>54514837 suggested with the added fire dragon bright before the yriel.
I also use the medium to thin the layer oranges.
I've been putting a gloss varnish on them afterwards but I don't know if I'll keep doing it.

>>54515092
Looks like that spider thing is about to spank whatever it is he is holding, and it looks like the Warrior's gun is sucking glowing orange shit out of the Warrior's ass to power the the weapon

File: hot tits.jpg (579KB, 1076x709px) Image search: [Google]

579KB, 1076x709px

>>54512780
It would take some work for sure but is possible.
(pic related)

File: WBMaulerfiend01.jpg (4MB, 3992x4720px) Image search: [Google]

4MB, 3992x4720px

I've been working on a better Mauler Fiend the for the last two days. It's suprising what a few swaps can do for the miniature as a whole.


>>54514336
I honestly adore your painting style, but your pictures are always a bit shaky, sadly making most of the details unrecognizable.

>>54514768
Unsuprisingly, it looks really good. Especially enjoy the weathering on this guy and the strong contrast between the armour and the bits of skin. There a a few details, that you seem to have missed, such as the piece of metal in his palm, next to the gun's handle. Also i think that the cloth around his neck hardly stands out. In fact, it very much looks like a piece of his armour, and that is, in my eyes, a wasted opportunity for more contrast.

>>54514924
I suspect that the painting marine is mostly green stuff, with some parts from the 54mm Inquisitor range, mostly the old Artemis model. I've seen the Space Marine Statue sculpt up close, and it's much too detailed to be part of this conversion.

>>54512780
Those are one of the worst models GW has ever produced so you'd be better off evading them

>>54512780
Chop up the flamer heads and dry fit them before you add glue. There's no reason why you shouldn't try if the flamer heads are surplus bitz.

>>54508735
I'm loving your blue and copper/bronze colour scheme anon.

File: Raptors.jpg (144KB, 1215x684px) Image search: [Google]

144KB, 1215x684px

>>54508644
Looks like death world forest to me

File: Whole Family is here.jpg (236KB, 864x1152px) Image search: [Google]

236KB, 864x1152px

>>54515092
>>54514837

Thanks for the tips. I love how bright the orange is on the Immortal's cord and Scarab's eyes are. That's the result I'm after.

I've tried a few techniques and can't seem to get it right. I don't actually have any medium so I'll look into picking that up.

The potato for an image is the current scheme I have for each model (My praetorians were my guinea pigs so they won't ever see the light of day). The warrior on the right had the Fuegen Orange done last while the one on the left was Jokaero>Fuegen>Troll Slayers.

>>54515154
That maulerfiend looks great!

File: 2017-07-25 15.34.21.jpg (656KB, 702x1254px) Image search: [Google]

656KB, 702x1254px

Getting some paint on the AM commander.

>>54508247
cool

>>54508514
i use it to lock down transfers

>>54515212
You have orange toobs as well. I dig it
I find I have to do a lot of coats with the troll slayer to ever get them to brighten up. Also painting a really thin grey (assuming black undercoat) gives my oranges better coverage

>>54508247
that keyboard man
buy a new one please

>>54514336
what parts have you used for this?

>>54514768
how did you do that grimy armor, it looks delicious

>>54509915
Oh shit I remember when that guy posted those models here saying he was trying to make orks that stood up straight.

File: 20353834_464727493891671_1285155295_o.jpg (86KB, 1193x671px) Image search: [Google]

86KB, 1193x671px

fuck me, i should've gone squad by squad

File: IMG_20170723_230704.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Working on a second grot-crewed "deffkopta"

>>54514336
Love the contrast your painting-style creates, we need better focused photos tho.
Remember a spot color adds a lotta life, like the teal(?) on left hand.

File: grotkopta1.jpg (561KB, 1872x1440px) Image search: [Google]

561KB, 1872x1440px

>>54515783
and the first finished one

File: IMG_20170723_230306.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

One of my character grots (usually used as an oiler to act as a bodyguard for the big mek)

File: IMG_20170723_225651.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

my grot-crewed warbikes

>>54512088
Keep us posted, kinda want to do this but give em slabshields and mauls

File: IMG_20170723_225800.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

A good start on the mega armored grot warboss and big mek. I'll be adding more bits and detail onto the gorilla arms of the boss.

File: IMG_20170723_232718.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>54515868
and their mega honchos (in Gorkamorka, honchos are the grot equivalent of nobz)

File: grotmarines.jpg (73KB, 960x720px) Image search: [Google]

73KB, 960x720px

I have one-third of a squad painted up now. Twenty more of these guys are converted wearing bits of scavenged space marine armor that still need to be painted.

File: IMG_20170723_231127.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

and lastly the Gorka and Morkanauts. One is made from a gundam Zeon mobile worker kit with most of the Wazbom Blastajet sprue, the other is made with a Funkopop Titanfall figure covered in choice bits from Imperial knights, battlewagons and stompas.

>>54514865
Thanks.

>>54515154
I see what you mean with the cloth, but I was intentionally keeping it similar to the armour, partly because these guys have so many details there isn't much armour left, and partly because I wanted to build on the contrast with the bright Daemon flesh. Food for thought though.

>>54515335
It's probably more laborious than it needed to be. Grey amour, highlighted as you'd normally do it. Sponged and painted on small amounts of vmc burnt umber for rust patches, highlighted the rust and also the paint under it. Then satin varnished followed by mig dark wash and AK light rust wash. The dark wash basically just all over then left for a while before coming back and removing excess. Took a bit of fiddling to get it looking how I wanted.

>>54515783
>>54515798
>>54515819
>>54515838
>>54515868
>>54515903
>>54515931
>>54515977
Apologies for blowing up the post with so much stuff, but I just wanted some feedback on the conversions and possibly some ideas for more grot looted things.

File: 54mm-Inquisitor-Space-Marines-Artemis.jpg (88KB, 873x627px) Image search: [Google]

88KB, 873x627px

>>54515154
I'd forgotten about Artemis; looking at the chestplate/collar makes me think you're right.

>>54512270

I hate the robo arm on this Poxwalker. Like it's so damn stiff and unnatural looking!

>>54515868
The red is nice and even, but the suits could use some paint chipping and dirt smudges on there. Also grot markings and stripes.

>>54512277
Just a comment about OSL in general. Ever tried using a torch in the day? Light is additive. If yellow marines are in an environment where their armour actually looks yellow, for instance day light, then there is probably too much light for the blue glow to be visible. If the blue glow is visible then the yellow needs to be painted as though it's in half light.

>>54516072
Definitely adding more black and yellow hazard stripes. Going to have to look up some tutorials on paint chipping as my previous attempts all looked off. I know the good stuff has to be done before the base coat, so I'm sort of past that now and have to go with alternate methods if I'm to pull it off.

>>54516044

10/10 would battle against!

>>54516050
Man, Inquisitor was great fun.

>>54516111
The simplest way to get paint chipping is use some foam, like the stuff you used to get from GW blisters, or the stuff you get from army transporting bags.

https://www.youtube.com/watch?v=4l0k8TeHgeA

Check from minute 11:20 onward. Duncan shows how to do easy paint chipping.

Scratches are done in the same paints, but with a paint brush.

>>54516044
Looking nice so far, could use some weathering to make it look scavenged and "Orky"

File: IMG_4324.jpg (356KB, 2134x1192px) Image search: [Google]

356KB, 2134x1192px

3 Mortars I finished highlighting this morning!
Next up are the mortar crews themselves!

>>54509748
Why couldn't they have stolen somethingfrom Starcraft 2 that would have pleased everyone- Da Overfiend

>>54516044
Your grots are awesome.

>>54508892
Nice confirmation bias, Overfaggot

>>54510884
I think it's an Inquisitor model painting Epic ones.

>>54516195
It really was. I still have Eisenhorn lying around somewhere, likely in pieces by this point.

Rulebook was gorgeous, too.

>>54516044
great looking conversions, now you need a big centerpiece with tanks fused on top of thanks fused on top of other tanks fused to a submarine with tracks

File: 20170725_164037.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

im new to this stuff

>>54511152
I did that once years ago. Washed thin over an ordinary flesh tone undercoat, highlighted up to bleached bone. Did not look healthy but did fit the part.

File: 20170725_164127.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>54516589

File: 20170725_164136.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>54516606

>>54511706
>>54511799
Damn nice anon. Looks proper grimy but still a lovely shade of yellow. Keep it up!
I'm trying to get out of a six-month painting slump myself so seeing others work is good to try and rekindle interest.

what's the best way get a consistent basecoat on a big model (corvus blackstar as proxy for GK stormraven) without an airbrush? I already primed the thing in black. I tried the drybrush method explained in https://youtu.be/74p9eGwRAog but it didn't really cut it for me.

>>54512302
so much this

>>54516625
Your brush control seems looks to be pretty decent. You should focus on getting full coverage however, as your blue looks very splotchy. Try doing multiple thin coats to give a strong and consistent color all over.

Other than that, pretty good stuff!

>>54516625
your paint seems thick, water it down a bit or use some lahmian medium, other than that they seem like some decent enough minis, some paint overspill though, but that can be lessened with time.

>>54516671
>>54516677
will do. thanks for advice

File: IMG_2375.jpg (1MB, 3072x2304px) Image search: [Google]

1MB, 3072x2304px

Finally i finished him.

File: Borale.jpg (23KB, 637x344px) Image search: [Google]

23KB, 637x344px

>accidentally bumps desk, plague marines falls.
>pick it up
>the tip of one it's horns has snapped off
>mfw

Anyone got any tips on painting nice (disgusting) nurgle human skin?

>>54516781
That sculpt is so much nicer than the plastic one GW shat out

>>54516818
You have failed
The emperah

How long do the Citadel texture paints (Agrellan Badlands, in this case) normally take to dry?

File: wtf.png (57KB, 147x198px) Image search: [Google]

57KB, 147x198px

wtf windows?
>>54516855
Thats why i chose him, but not new Daemon Prince. Also, it was pretty hard to attach wings to him -- still looks extremely fragile.

>>54516924
>still looks extremely fragile.
If you've pinned them then they should be fine, they'll probably be fine even if you haven't as long as you're not too rough with them.

>>54516971
I used no pins -- only superglue and Tamiya Putty.

>>54517023
I BOUGHT LAHMIAN I SWEAR I'M A GOOD BOY

>>54517023
D-Duncan senpai...

File: 20170725_104311.jpg (2MB, 1661x1864px) Image search: [Google]

2MB, 1661x1864px

Second minature Ive done. I like how it turned out. Few things I need to work on though. 1)the coat isnt as smooth as Id like. I THINK its because I didnt have an even prime. 2) A little too dark. Probably from the wash seeping into the uneven base due to poor priming. 3) After I get the collors fix i need to learn to dry brush and highlight. I feel like I missing out on to many details.

Thoughts?

File: 20170725_104822.jpg (2MB, 1955x1481px) Image search: [Google]

2MB, 1955x1481px

>>54517302

For comparison. One on the left was the first one I did. It came from the 3 space marine paint set. So the paints were old snd the brush was medicore. I think its an improvement. Im working on a few more right now using different techniques to see what works best.

>>54517401
you need to focus more on getting a smooth coat, right now your paint is really uneven and thick (it's espeically notitcable on the right marines shoulder and gun).
Also if you've not already watch a few tutorials about the basics, other than that just keep practicing

>>54517401
Good try, but you should try:
Using a wash
Basecoating white/yellow or any bronzish color before applying gold
Other than that, follow some guides/watch tutorials

File: 20170725_120211.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

Punisher for my Confederate themed Guardsmen. Just need to neaten up before washing. Should I do recess shading or all over? And should I add more markings to make it more interesting?

>>54517580
>Confederate themed anything
>not Feral Orks

>>54517627
Found the yankee.

>>54517580
racist please delet

File: Tiny head tiny arms.jpg (380KB, 1284x1560px) Image search: [Google]

380KB, 1284x1560px

Just had some PuppetsWar heads delivered and they're alot smaller than I imagined they would be. Could these be salvaged by green stuffing the gubbings space marine heads have on them or should I just chuck the heads on some guardsman?

>>54517627
>>54517751

yankees are worse than elves

>>54517784
on guardmen, thats way too small

>>54517785
racist end it NOW!

>>54517802

STOP BEING SOUTHERNPHOBIC! REEEEEEE

>>54517785
Ain't that the damn truth. As if the Jersey Shore dickheads aren't irl flashgitz.

>>54517796
Thought so. It's a bit disappointing because they took a month to arrive and I don't fancy playing marines whos gene-seed defect is comically small head syndrome.

>>54517899
Shit that sucks, at least you'll have some cool Guard heads?

>>54517784
HAHAH just use them like that please.

>>54517820
*gets you in headlock*

Look pal I'm trying to be reasonable here

>>54517899
Yeah unfortunately puppets war heads are a bit small even for guarsdmen. You can make it work though, if you're clever enough with greenstuff or with your paintjob.

>>54517990
Not him, but as the modeler of the tank in question, I'd ask you both to stop shitposting. I'm trying to make a serious contribution here.

>>54517784
earthworm Jim is that you

>>54517924
Yeah, they look pretty decent on scion bodys so it's not all bad.

>>54517954
I'll play them as a Salamanders successor chapter "Son's of Vulkan". They can regenerate lost body parts but due to a gene-seed defect they grow back a fraction of the size.

>>54518027
well delete.

just kidding big boi I like the tank but I'd have went for a colour for the barrels etc. For me the bronze is a bit dark

>>54518027

Fine. I call a temporary armistice with the Yankees. Now back to your post. Do you want the tank to look battle worn or clean? In guess thats the best way to decide if you want recess shadding or all over. As far as markings go I think it looks good as is. Maybe add some kill count markets to the others side if you think it would fit.

I want to build/convert 6 zzap guns and some anon on an Ork thread a while back posted his zzap guns which used old spark plugs. I didn't think to download the picture at the time so if that anon sees this post can you post the zzap guns again please? Did you scratch build the chassis or use trukk parts?

>>54518198
Not deleting for anyone's ridiculous sensibilities.

Yes, I realize the bronze is dark. However that's just a basecoat. Going to be highlighting with Skullcrusher brass, as well as doing a heat distortion effect.

>>54518231
I already have an Aquila here, but yes, i think some kill markings on the hull are a fine idea. As for battle damage, I don't feel like having a lot, so I guess I'll do a recess shade. Maybe some light wear using that sponge trick.

File: 20170725_125433.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>54518318
Pic for reference

File: IMG_1673.jpg (1MB, 3418x1681px) Image search: [Google]

1MB, 3418x1681px

>>54508644
Ooh, that's me. I applied the green with an airbrush starting with vallejo olive yellow (looks dark green on a black base coat) and blended up about 3 layers brightening each time as I go with yellow ochre and white.

Washed the whole thing in gw camoshade to bring the layers together into a more olive drab sort of green, painted the details/edge highlights and lined the recesses with nuln oil.

Here's a line up of some of the other WIP guys for you.

>>54518357
i'll take a better picture of the guy on the left, looks more of a mint green IRL than just grey.

>>54518357

You dont have any trouble painting/airbrush with the arms already attched? I was was worried that wouldn't come out even.

File: IMG_1675.jpg (304KB, 1217x1770px) Image search: [Google]

304KB, 1217x1770px

>>54518391
There's one with better lighting.

>>54518410
Nope, but I use a 0.2mm nozzle and heavily thin my paints. As long as you have good control of the air/paint mixture coming out of the brush, no problems at all.

>>54516818
It's a sign that you should file the horns down.

All of the Nurgle models in Dark Imperium are cranked up to 11. Poxwalkers look much nicer when you remove the spikes.

File: Forgeworld-MINOTAURS-3.jpg (47KB, 840x518px) Image search: [Google]

47KB, 840x518px

Just ordered Asterion Moloc from Forgeworld, what can I expect? Never touched a FW model before.

File: IMG_1640.jpg (1MB, 3220x2306px) Image search: [Google]

1MB, 3220x2306px

>>54518357
Working on a castigator in the same colour scheme too. This army's going to be sweet when it's done.

>>54518501
First thing you need to do is trim away the flash and moldlines, then wash it in soap and water. Don't let there be any dust on it when you apply an undercoat. You'll be sorry otherwise.

>>54518501
>8th edition
>buying manlets
>expensive manlets
Kek

>>54515783
What did you use for that? I want to steal that id

>>54518602

Yeah, well unfortunately I don't think FW will ever update their models to Chad size but on Chads are only slightly taller than anything in Termis. If anything, I could just raise them up the base.

>>54518636
Not him but i think its one of hasegawa's egg planes.

File: boxtops.jpg (176KB, 796x506px) Image search: [Google]

176KB, 796x506px

>>54518700
Oh right, those things

>>54518712

why do the japs have this thing with military hardware and little girls

I heard there is entire anime series with this themes

File: IMG_20170725_1329556_rewind.jpg (1MB, 3200x1800px) Image search: [Google]

1MB, 3200x1800px

>>54508208
R8 me now boys

>>54518778
>why do the japs have this thing with X

just dont ask those question anon, two nukes can do much to a country

>>54518883
This. Japs have always been strange, but the radiation probably made it worse.

>>54518804
Same paint palette as me/10

File: 20170725_132337.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

WIP for my Nurgle Psyker. Gotta work on those wings on his backpack and geez was that psychic attack annoying to paint.

File: 20170705_122545.jpg (446KB, 1512x2016px) Image search: [Google]

446KB, 1512x2016px

>>54518978
That palette is everywhere. I have one too and here it is being used as a museum prop at the National Museum of the USAF.

>>54518992
You know, I'm still pretty new to this and painted the first dude in my new colour scheme today and was pretty proud of him, then someone comes along with a model that would be done about twice over for me and says "yeah, still WIP". That magic blast looks REALLY sexy.

>>54512277
How the hell do you do head stubble, that looks great

>>54518804

Enjoy yourself my man, try to keep it clean, also don't namefag

>>54519049
Oh shit didn't even notice I still had it on

>>54518992
those guts are really nice, good job.

>>54516883
I let mine dry over night

How much layers of paint a model can bear before losing details?

My arachnarok has one coat of black, 2 coats of 2 different paints and one coat of shade. Is it ok if I paint it black again and proceed to give it a non-retarded scheme?

File: 40k painting marine eyes details how to.jpg (13KB, 360x240px) Image search: [Google]

13KB, 360x240px

So ive been using this guide to paint my space marine eye lenses, but they keep looking crosseyed or the effect isnt coming through to me. I'm painting them green with: Caliban Green, Warpstone Glow, Moot Green, and a dot of Ceramite white.

Is there a better way of doing these? I tried silver eyes and the green glaze but it didnt come out right.

File: IMG_20170725_192217210-1305x734.jpg (206KB, 1305x734px) Image search: [Google]

206KB, 1305x734px

First Sicarian I've painted, still new to this (Previously just done 2x10 Skitarii and a Dominus in Mars colours). Trying out my new colour scheme, plus the layered highlights on the sword and using texture paint. I know there's a couple spots on the blade where the Evil Suns Scarlet wasn't quite right, but otherwise I'm fairly confident this is my best mini yet. Think I'm tabletop standard yet, and/or any tips?

File: IMG_20170725_192230004-1305x734.jpg (194KB, 1305x734px) Image search: [Google]

194KB, 1305x734px

>>54519534
Side view. I've decided that Sicarians are fun to paint compared to the regular Skittles, much less fiddly.

File: 2017-07-25 14.36.33.jpg (667KB, 1884x2008px) Image search: [Google]

667KB, 1884x2008px

>>54513462
I got you covered.

>>54514336
Totally rad.
>>54513395
Probs not. Just painted this last night.

>>54516109
Huh. Good point. I should ptobably just make the yellow armor touched by light bright and washed out.
>>54519042
Thanks- Mixed administratum grey and cadian fleshtone with a bunch of lahmian medium and just stippled it on. Its not super hard. It helps to look at someone's head or a picture so you know where to put the hairline

File: Explosion_helmsdeep.jpg (423KB, 1600x1345px) Image search: [Google]

423KB, 1600x1345px

Would it be inconvenient to make a single base for a single squad of Inceptors?

Was thinking of making a wall or building side that they come bursting out from.

Pic related to the idea.

>>54519499
Maybe White Scar instead of Ceramite white? It's layer, so it will look more like reflection tinted in colour of the base.

>>54519921

For gaming purposes, yeah very inconvenient.

Many people make things like that but modular. Each inceptor could have their own separate base that fits into a larger scenic base with exploding wall and whatnot.

>>54512277

Not a huge fan of Imp Fists but goddamn I love seeing people paint their models after them. The yellow scheme is just too good to not appreciate.

>>54519961

>Each inceptor could have their own separate base that fits into a larger scenic base with exploding wall and whatnot.

Thank you so much for that anon, I did not think of that.

Now, I gotta look up to how make an exploding wall with no past experience of sculpting terrain or working with the required materials.

File: DSCN1806.jpg (6MB, 4608x3456px) Image search: [Google]

6MB, 4608x3456px

>>54519534
>>54519548
I would put more details on the armour (lenses, gold trims and stuff), but it is probably just my personal preference. Blade has great scheme.
But I am also pretty new to this, so I wouldn't take myself too seriously. See my infiltrators.

>>54519928
That might be the case. The dot might be too bright or big, making them have bug eyes.

>>54520013
The rank and file will have brighter bronze armour with silver trim, and the limb stumps and torso side fatigues will be green instead of black since I want to keep the green going. I just prefer a somewhat minimalist approach, but there are certainly cables and rims and such I could have painted if I could have been bothered to pick them all out. Blue Skitarii always look nice, although personally I'd stick some more wash on those Taser Goad handles.

Now trying to work out how I'm going to approach painting Goads with my red-orange thing. Probably something similar, just focussed more around the prongs.

>>54520193

anyone have the printscreen with duncan telling a disabled anon to wash his wheelchair with nuln oil?

>>54515592
>i should've gone squad by squad
>>54515609
>>54515627
It's not too late.

It'll be super motivating to look at the finished guys while you paint the rest too.

new thread
>>54520768
>>54520768
>>54520768

File: 1.jpg (341KB, 1078x800px) Image search: [Google]

341KB, 1078x800px

>>54508186
Pretty much finished now.
I somehow managed to fuck up his power sword, so I'm replacing it with a chainsword.

File: 2.jpg (340KB, 1078x800px) Image search: [Google]

340KB, 1078x800px

>>54520789
and his back

>>54520789
>>54520847

I can only hope i'll ever be as good as you