Gunpla/Plamo General

File: 1.jpg (110KB, 720x548px) Image search: [Google]

110KB, 720x548px

First for kit never

File: don't talk to me or my son or my son's son or my son's son's son.jpg (820KB, 640x960px) Image search: [Google]

820KB, 640x960px

2nd for Zaku families

File: Wing_Gundam_Fenice_-_Front.jpg (289KB, 1232x1632px) Image search: [Google]

289KB, 1232x1632px

>>14679218
I dunno about the Rinascita Alba. The design's a bit blander than the Fenice since it lost the asymmetry that I liked about it.

File: zack.jpg (303KB, 581x800px) Image search: [Google]

303KB, 581x800px

I want to go with this color scheme for the Zaku I, any suggestions? I might choose a lighter blue, though.

>>14679269
Whoops, just noticed the knees should be gray, not orange..

>>14679265
Of this we are in agreement. Alba is the Wing Gundam-coloured version of the Rinascita, by the way. It's a good MG though, aside from poor design choices.

>>14679269
Paint it pink like Love Live.

>>14679283
If that's the case, might as well get the regular Wing Gundam. I was thinking about following the other anon's advice and get the MG version of my first Gunpla (Aile Strike).

Really, I just want wings on my robot and the HG Barbatos is the only thing that's making me reconsider

>>14679269
Yo that Mango Sentinel. Where yo Curly Mustache?

Are there any pistols for gunpla? I'm really tired of rifles and launchers.

>>14679330
The following have pistols:

Zaku Amazing
Gundam The End
K9 Sniper GM
Kampfer Amazing

>>14679241
>>14679298
It's the same way for me, haha. We haven't watched any series together though as I'm barely even getting into the shows myself.

>>14679330
>>14679342
You can also just get the HGBC Amazing Weapons Binder instead of getting a full kit if you do this.

Shouldn't we be including the Group Build info with every thread OP?

File: amuro crying.jpg (51KB, 500x375px) Image search: [Google]

51KB, 500x375px

>tfw have a GM Command, Black Rick Dias and GP02 coming in the mail
>And 6 weapon kits

What are you guys waiting on/building soon?

File: 20120130_panku_01.jpg (145KB, 1440x810px) Image search: [Google]

145KB, 1440x810px

This ugly gunpla modeler is fucking super hot chicks and basically, you are fucking stupid

>>14679358
Painting an SD Kshatriya, building an NG Kimaris Trooper to try panel washing on, and got three mass produced suits I'm using for a kitbash-paint project.

>>14679358
Those sweet, sweet old ZZ kits in September, and then I need to buy:
2 HG Gyans (Gazu R/L)
2 HG Doms (Dowadge/Dowadge reformation)
1 HG Zaku II (Desert Zaku)
and an HG R-GyaGya (R-JarJa)

>>14679354
Same for the K9 pack and Amazing Booster. Only The End do you have to buy for it's revolvers.

>>14679363
He is a comedian, and comedian is hot in Japan.

File: DSC_0555_1.jpg (707KB, 1080x1920px) Image search: [Google]

707KB, 1080x1920px

I fucked it up a bit, but goddamn son

>>14679358
Waiting on my RG Sinanju.
Might work on my custom Ace Grimgerde for the groupbuild.

>>14679358
Honestly I'm holding off on building anything until i can make my next order.
I plan on ordering a dozen or so kits

File: 1471927395036.jpg (1MB, 1142x1600px) Image search: [Google]

1MB, 1142x1600px

>>14679358
Got an MG Kampfer on the way, my first MG
pretty hyped

>>14679358
Gundam Leopard Da Vinci, Gundam Astaroth and Denial Gundam with 6 campaign weapons and Cathedral Gundam on the way as well.

>>14679388
How much of a hand grenade is it?

>>14679426
It's an older MG, so if you proceed further up, you'll be amazed.

File: in another world.jpg (78KB, 438x550px) Image search: [Google]

78KB, 438x550px

>>14679447
Yeah the engineering on some of the newer kits is pretty baller from what I've seen, but the Kampfer just speaks to me.

I might pick up the Sazabi/Nu when I find the money and time.

>>14679358
Got an AGE 2, Astaroth, and a Puchigguy on the way.

Only four customize campaign sets tho :c

Actually wait shit still gotta finish off my AGE 1 first.

File: IMG_20140921_105435.jpg (2MB, 3872x2592px) Image search: [Google]

2MB, 3872x2592px

>>14679358
caved and bought pic related

>>14679452
I'm getting it since I found the 9$ sale on it, and from everything I've seen it's a kit that's aged decently.

File: edgyguy.jpg (146KB, 539x960px) Image search: [Google]

146KB, 539x960px

>>14679112
Eva kit from Koto are okay. i owned the Rebuild version of the Eva-01. be careful if you plane to buy one; the "flap" over the entry plug have tendecy tu fall you have to glue it and my kit have some reaction with the Mr.Clear matt finish, they cracked and fall in pieces.

and i finish the basic assembly and sanding of my Mazinkaiser.

>>14679469
Damn the mazinkaiser kit don't look too bad
I might pick one up

>>14679358
Bought a Barbatos 6th form that I want to do another light mod for, but I'm waiting to finish my old NG freedom repaint and repair my kshatriya light setup, as well as other projects, before dedicating time to build and paint it up.

Does anyone know why Polyurethane resin reacts/melts Polystyrene plastic?
Is there some kind of warning i missed, there is nothing about it in the guild and googling it doesn't help at all.

>>14679459
What kit is that? It doesn't look like the normal MG Kampfer. It looks painted too. If so, you've done well.

>>14679358
I have a half finished MG build strike because I got bored of strike frame and an untouched Freedom 2.0 because I'm scared I'll fuck up the leg like everyone else

I want to buy MG GM custom and MG REGZ

>>14679495
It's kampfer evo which is a chink version of the mg kampfer that uses the zaku 2.0 frame. Photo's just one I found on the internet, but I do plan on painting it and probably use it for the group build

>>14677769
Is the Macross kit good?
Any photo-review from Japan?

File: 20160826141107764.jpg (26KB, 500x500px) Image search: [Google]

26KB, 500x500px

> Premium Bandai exclusives are now available outside of Japan! International shipping service is now available. The RG 1/144 Trans-Am Raiser Gloss Injection Ver.and four other Gunpla are available now!

http://en.gundam.info/topics/white/104699
http://p-bandai.jp/bc/images/net-s_tokushu/international_delivery.html

>>14679573
So we get trans am 00 and 4 vanilla kits? I don't get it

File: choo choo muthafucka.png (427KB, 614x511px) Image search: [Google]

427KB, 614x511px

>>14679515
Good luck anon, it seems like a good kit.

>>14679573
Am I being played?

File: mindblown.webm (2MB, 480x360px) Image search: [Google]

2MB, 480x360px

>>14679573

>popular characters such as Gundam

>characters such as Gundam

>>14679592
>>14679585
They will probably add more stuff later, right?

File: Mineisbigger.jpg (80KB, 960x539px) Image search: [Google]

80KB, 960x539px

>>14679564
i just finish the Edgy Boy. be patient i will post some pictures in the week of the kit in no paint. These two kit gonna be full paint to.

For the moment i can say that the kit inclued Water Decals and don't have so many pieces but have a great level of details ( Hasegawa Kit).

the kit have only 4 different colors but i thinks just panel lining and a finish coat will be suficient to have a great kit.

mine is going to be custom with add details and special paint in a lot of different shade of grey,sand and brown tones.

+ you have to cute, sand in a solid plate 39 litlle robot of 4mm by 2 by hand... it seems to be the more annoying parts of the things.

>>14679604
Maybe if we send another bomb

>>14679573
inb4 no one orders anything and bandai goes back to not doing pbandai internationally

>>14679622
They are not shipping by themselves, so I doubt they will lose anything if few people order.

im a fucking retard

I should have sold my mb freedom and invested in mb sf when I had the chance

>>14679628
i know but they could be using this to gauge interest

>>14679241
>release gunpla without manual
>sell it as a 3D puzzle
>save 2 dollars on paper

Bandai should hire me. I'm a fucking genius.

>>14679482
Not sure what you tried, but polystyrene serious just reacts to everything, especially organic stuff. There are few things it doesn't react to.

File: 20160830_020325.jpg (910KB, 1345x900px) Image search: [Google]

910KB, 1345x900px

Hollowed out behind the visor parts on the big Master Cheif kit and experimented with adding an orange LED. Battery is definitely going in the torso but I'm not sure exactly where yet.

This is going to be for a small local show in two months so the battery only has to last a few hours. I picked up some grip plate patterned styrene to detail up the base with too.

I'm entering a couple of other things but this is going to be my main entry.

>>14679597
Gundam was the best Try Fighter

File: 1472479086459.jpg (13KB, 300x288px) Image search: [Google]

13KB, 300x288px

>>14679612
>All those runners
It makes my dick rock hard when I see a lot of runners

>>14679652
I know this feel. I rock hard just by thinking of my futur neon zeong.

>>14679648
how does it look in low light?

>>14679636
you see, if they put up an actual worthwhile P-Bandai exclusive like, oh, i dont know... MG Tokugawa Mk-II and SDX Superior Gold God Kaiser, then maybe, MAYBE, someone will actually buy it.

>>14679726
>Sd
>$300 non-model kit sd
>Selling in the west

Good one.

File: 1454211937527.png (1MB, 1169x800px) Image search: [Google]

1MB, 1169x800px

>looking for 50 x 150 cm table things to put on my gunpla table

>all i find is anime body pillows

>>14679636
But it still doesn't make sense that they're putting vanilla kits on there. Doing that for just a normal unicorn or RX 3.0 MG is so much fucking effort when I could just buy it from HLJ or hobbywave for like 40 bucks.

>>14679652
>tfw I automatically assumed you were snapfag because of the reaction image
I'm not entirely convinced you're not actually.

>>14679851

nah. snapfag isn't as gay as he is

Anyone here use testors paint for their kits?

The only arts/crafts/hobby store near me is a Michaels and thats all they got

>>14679927
I've only used their topcoats and they were awful. I haven't really heard anything about their paints though.

>>14679927
I used them to get used to handpainting on an SD kit with their enamels, as long as you thin properly it seems to come out pretty okay

>>14679851
I was the guy who asked for said image because it was adorable.

File: 5625864344_e3bac5c5d0_o.jpg (1MB, 2965x2191px) Image search: [Google]

1MB, 2965x2191px

>>14679358
still waiting

File: IMG_20160823_164019.jpg (578KB, 1536x1536px) Image search: [Google]

578KB, 1536x1536px

Tfw you are 4 pieces away from completing the kit but too lazy to buy paint

I just started building an MG instead

File: File Aug 29, 6 19 56 PM.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>14675016
Late reply because some shit came up
Anyways, my setup is this cheap little Testor's Airbrush and no I'm not using Testor paint, it just uses Testor bottles and the kit came with 2 empty ones that I mixed paint in

File: File Aug 29, 6 19 44 PM.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>14680155
I was able to get it spraying again, not entirely sure how but I did.
Results from some pieces, it seems like I went heavy here but I may be wrong but regardless I want to work on my technique

File: File Aug 29, 6 19 28 PM.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>14680157
Not sure what the texture here is about, or if it's even a problem at all
Also, never painting on the runners again because that was a terrible idea

>>14680158
It is a problem, that's orange peel texture, which means you layered it on too thick

>>14680155
>>14680157
>>14680158

Your paint is pooling, so you've laid it on too thick, which is also what causes the orange peel. Do thinner coats, wait for it to try, then do more coats. Don't rush, or you'll ruin it. If you've primed (or sanded if you're not priming) properly you won't have any problems with paint adhesion on thin coats.

>>14679363
>whitey judges asians by white people standards with a sense of white supremacy
>"wtf why does the entire world hate us and call for our death we dindu nuffin we good boys"

>>14680174
>>14680200
Thanks, will work on that

File: IMG_0468.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>14680262
Oh yeah, took a pic this morning before work, it seems to look a lot better dried at least

File: e7d2401c9b4eaae94b63ce2c1592b0a9.jpg (778KB, 786x1080px) Image search: [Google]

778KB, 786x1080px

== ACE PILOT GROUP BUILD ==

Starting September 1st, you have two months to build, customize, and paint a mobile suit of your choice into your own personal design. This can range from just a repainted Zaku to a kitbashed Gundam loaded with any spare rifles and Rocket Launchers you can find. Any suit from any series is fair game, just stick to 1/144 kits and you're good. When you're done feel free to post it in the thread, but also send pics to [email protected] so that all the entries can be judged/posted at once when the group build is over (If you don't want to be judged for the contest just feel free to mention it when you send in your pics).

Prizes include:
>1st Place: Any HG kit under $25 + an Action Base 2
>2nd Place: Any HG kit under $15
>3rd Place: An Action Base 2
(Note: Shipping is to USA and maybe Canada only)

Group build ends on October 31st, get building!

>>14679948
I've had nothing go wrong with their top coat. What's your deal?

File: Ace Custom Testfit.jpg (1MB, 1716x678px) Image search: [Google]

1MB, 1716x678px

>>14680320
Decided to do Ground Type and Space Type equipment, but fuck me the Transient feet are awful. Fun Fact, the 'Ground Type' has to be holding its gun out or the whole thing falls over backwards. The absolute worst part is that the ball joint is on the foot rather than the ankle, which is the opposite of virtually every other kit ever made so... either I deal with it or make a new ankle joint.

>>14679927
No Hobby Lobby? Shame, they do a good range of Vallejo paints and quite a lot of airbrush kit. At least, the ones near me do.

>>14680320
This is going to be my first group build, super excited.

File: hugeasssword.jpg (998KB, 1136x852px) Image search: [Google]

998KB, 1136x852px

Finished building my mg quanta. Goddamn, the v fin keeps falling off.

>>14680320
How do custom builds generally work, is it just getting the kits you want pieces from and modifying them with X-actos until they fit together or something similar?
Kinda want to give it a shot since I've never done one before

File: 1468677038444.jpg (66KB, 1280x720px) Image search: [Google]

66KB, 1280x720px

>>14680320
>Shipping is to USA and maybe Canada only

>>14680458
Both Clear and dullcote remained tacky for ages after painting for me. Dullcote was better but it was still tacky for weeks after spraying but clear was tacky for months.

Both also still get a bit tacky now if you hold them wrong, the clear after more than a year!

>>14680483
It's the /m/eijin cup

>>14680483
Most parts generally fit together if its a limb to body connection, due to the polycap system. Forearm to bicep would be more complicated, I think.

File: 1406219461962.png (304KB, 680x680px) Image search: [Google]

304KB, 680x680px

>>14680320
wow what a shit contest.

@14680505
>bait so low it's underground

>>14680505
Oh, I was mostly thinking in terms of mixing bits of armor together not limbs. Makes more sense now

File: 20150611_233150-1.jpg (830KB, 1152x1152px) Image search: [Google]

830KB, 1152x1152px

>>14680483
You mix and match, detail like scribing, or scratchbuild parts. Some stuff fits together easily, some require modification to fit, some are just straight up glued on.

A custom can even be as simple as it holding a different gun and having a different colorscheme.

>>14680486
Huh, it seemed to work out for me.
I had a friend who's really autistic about not using it because he's kind stupid and sprays on thick and on the kit all at once.

>>14680483
Kits have varying levels of compatibility because, for instance, Bandai could never make up their mind whether they wanted the shoulder joint to have a peg or a ball, and whether they wanted the socket in the torso or the shoulder.

Be prepared to modify pieces to fit different sizes and shapes of connector. Backpacks are a big one there, although they're also one of the easiest to modify. Always save your spare polycaps and remember sprues make good scratchbuilt pegs.

>>14680467
That looks really good, anon

>>14680489
Fall 2016 /m/eijin cup

>>14680210
>anyone who says something I don't like is white

>>14680210
Fuck off you nigger, she isn't even that good looking

T. Asian

>>14680483
What works best for me is taking a base kit and work from there. Once you have a "canvas" you can go and find something that works for you from any spare parts you have lying around, or a second kit that you don't mind sacrificing to Plamor. Most modern HGs from 00/AGE onward use pretty much the same construction method (Ball-jointed hips/elbows, female arm peg to male shoulder peg, etc) so it's mainly just swapping limbs, but you can experiment with what you have and see what works. Pick up one of the Build Fighters kits based off of an older kit like the GM Cardigan, EZSR, or Mega Shiki that come with a bunch of extra parts and just fiddle around with those and find a combination of what you like.

>>14680485
Sorry, I'm just going off what I can do with Amazon. Also it turns out US buyers can ship to Leafland so Canadafriends are a go.

Zaku kai rg fucking never

File: 14159724_10154357241005460_1858225597_n.jpg (54KB, 960x539px) Image search: [Google]

54KB, 960x539px

How is this for priming?

>>14680820
Looks smooth.

>>14679241
I want to do something like this with what will be my first painted kit (also an MG Double X) but only one of my paints are actual model brand. (Tamiya)
The others are krylon band that I had lying around. These will work well too right?
I should top coat before painting right. what about panel lining?

>>14679573
Anybody know what's special about the other P-bandai imports? They all look normal.

>>14680897
I don't think you're supposed to top coat before painting.

>>14680902
oh shit that's right I had it backwards!!
I just went on a tangent about that stuff anyway. All I really want to know about is the paint.

>>14680897

Topcoat literally goes on top. You don't topcoat before painting. You sand a little which helps with parts fit and also helps primer adhere to the surface of the plastic. Then you prime. Then you paint. Then you apply glosscoat. Then you panel line/wash. Then you apply the final finishing topcoat.

Also DO NOT use Krylon, it goes on thick as shit and the pigments are giant, so you are guaranteed a painful orange peel texture.

>>14680906
>>14680906
Thanks man, I had a feeling about the krylon.

File: TOY-RBT-4148.jpg (39KB, 600x600px) Image search: [Google]

39KB, 600x600px

>>14680907
These new MSG items are kinda cool.

>>14680912
>>14680907

Those wings are probably the best backpack add-on Kotobukiya has made. And that speak would look great once the clear parts are painted over in a nice metallic.

>>14680906
So I have a can of testors that says clear coat and spray lacquer on the can but it says glosscote on the sell label.
I was under the impression that it would be my top coat. Is there another brand I should look at? I think I do want a gloss finish at the end of the day.

>>14680944

There are different types of topcoat. You can use that as your topcoat if you want a gloss finish.

Be forewarned though that Testors

1) Is really fucking strong
2) Will make your panel lines run if you spray it on too heavy

The generally accepted solution is to do a light coating of Testors, wait a day, then spray a second layer to finish.

File: PSO2_Gameplay.jpg (121KB, 1024x576px) Image search: [Google]

121KB, 1024x576px

>>14680912
Looks like something I'd expect to see in PSO2.

>>14679927
The blue on the visor, shoulders, upper arm, thigh, hands, and bottom of the feet on this >>14677683 were done with testor's enamel.
They were kind of a pain to work with, and I wouldn't recommend using them if you have other alternatives, but they're usable

>>14680987
Forgot to say, but I also used Testor's topcoat for it, and didn't have any problems like >>14679948 >>14680486

>there are people who snapbuild fucking kotobukiya kits

why

why

why

>>14679358
Just ordered 3 kits.

MG Jesta
HG Mobile Worker
1/100 Grimgerde

>>14680999
Never bought from them, do they need paint or something?

>>14681031
>paint or something
a bit of an understatement

>>14680999
Are there any kotobukiya plamo lines that don't need cement/paint?

>>14681031

Kotobukiya kits have more obvious seam lines, some only slightly obvious, some real goddamn terrible. They also require a lot more detail painting. Although they've stepped it up recently.

File: MH12_HWU12_up6.jpg (344KB, 1000x667px) Image search: [Google]

344KB, 1000x667px

>>14680912
Oh shit one of them looks like Feito's Bardiche. Cool.

File: TOY-RBT-4148_01.jpg (34KB, 800x534px) Image search: [Google]

34KB, 800x534px

>>14681045
You get a shitton of parts, CLEAR parts and possible configurations.
And it is cheap too.

considering all of the kits, not just setsuna's

>gundam 00 season 1
better designs

>gundam 00 season 2
better kits

>00 movie
worst designs AND kits

yay or nay

>>14681071
I will definitely be picking one up for my FAG kit. The older MSG weapons are too edgy for my tastes. I hope the newer ones are more subdued.

>>14681073
worst designs overall definitely goes to S2

>>14681073
>>14681087
exia > qanta > 00 raiser
dynames > zabanya > cherudim
kyrios > arios > harute
virtue = seravee > raphael
seraphim > nadleeh

>>14681073
But the movie has the Brave Commander, which is top-tier.

>>14681096
This. The basic quality of the kits really went up as the franchise went along. A lot of the S1 HGs were FG-tier, whereas most of the movie kits were modern HGUC-tier.

>>14681093
Nah, it's:
Exia > 00 Gundam > Qant > 00 Raiser
Dynames > Cherudim = Zabanya
Harute > Kyrios > Arios
Virtue > Seravee > Raphael
Seraphim > Nadleeh

>>14681093
>>14681146
Exia > Qant > 00 > 00R
Dynames > Cherudim > Zabanya
Kyrios > Harute > Arios
Virtue > Seravee > Raphael
Nadleeh > Seraphim

>>14681135
>A lot of the S1 HGs were FG-tier,

By what standard? They're subpar now but decent to good for their time, and definately a step up over most destiny kits. Especially when it came to seam hiding, shoulder range, and part separation. The initial kits just got caught in that awkward stage between engineering jumps where they are better than most seed/destiny, but lack the better improvements of the later 00 kits.

>>14681146
>>14681154
at least we can all agree the raphael is shit

>>14681073
Nay

>>14681073
Nay.
I think that overall, the movie suits were better than the rest of the series. Can't say about the kits though, since I dont own all of them. But from what I have the movie suits are better than the earlier kits.

Exia = Qan[T] > 00 > 00R
Harute Final > Kyrios >>> Arios
Zabanya Final > Dynames > Cherudim
Virtue > Seravee = Raphael

Reading the wiki on the gelgoog made my dick rock hard and made me want an origin ver gelgoog so bad.

File: crest.jpg (110KB, 700x561px) Image search: [Google]

110KB, 700x561px

>>14680458
>>14679948

The Testors one coat lacquers are the ones you want, the wet look clear is great, even on shit like this steel alclad that has some texture to it. It sands and polishes up really nicely. I use the stuff when I'm doing something I will sand to super shine status.

>>14680820

can't see shit

File: Untitled-6.png (1MB, 1195x793px) Image search: [Google]

1MB, 1195x793px

Literally perfect

File: 1463168948278.png (2MB, 1129x1600px) Image search: [Google]

2MB, 1129x1600px

>>14681260
Good, now read MSV-R and weep over no modern Ridden custom Gelgoog hguc.

>>14681291

But it's literally just a red Gelgoog.

I want use Providence's waist on Legend's body but waist - body sticks aren't same size. Can somebody give a hint?

>>14681294
Different backpack. Which can only be gotten on the really old msv kit. The onld kit is also the only kit that included the bazooka. A modern hguc with all the added panels would also be nice.

You would think with all the UC wank and Revive shilling Bandai does they would have made a Revive Gelgoog by now. They could sell a billion different variations.

>>14680157
oh yeah you went pretty heavy. is that airbrush dual action? are you spraying full blast?
white is hard to paint because it requires a lot of coats over grey primer to show as white I think you tried to get that white color in too few coats

>>14681323
>white is hard to paint because it requires a lot of coats over grey primer to show as white
This is why white primer exists.

>>14680320

SEED tier ace mods okay?
also shipping a single Action Base 2 across country for 3rd place. lulz

>>14681326
I dont think he knew about white primer.

>>14681315
You are overestimating the sell power of the character.

>>14681339

Not really. There are a lot of Gelgoog variants you could make, and the Gelgoog mold that exists is pretty outdated. UC fags would go for an updated Gelgoog, and I'm sure they could find some way to shill it with a Build Fighters OVA or something. You could even have P-Bandai Ramba Ral's Gelgoogs and all that shit.

File: o1280085413729845137.jpg (477KB, 1280x854px) Image search: [Google]

477KB, 1280x854px

Anyone one else picking up the new Hummingbird?

It's practically my dream kit, in my favorite scale.

>>14681380
link?

>>14681367
Ramba Ral was dead before the gelgoog was even a thing in series. If you mean in the vein of a Gelgoog R35, both the Gouf and Dom R35 were references to a ms he had and a ms he was supposed to be sent (but M'Quve was being a little shit and didn't send him). A Zaku I R35 is more likely than a Gelgoog R35.

File: 1465504399097.gif (1MB, 480x270px) Image search: [Google]

1MB, 480x270px

>My tool kit came in today so I begun work on my very first MG
>Everything's going well, my sanding could be better but it's going well
>Using a paper towel and a black Gundam Market to panel line as I take pieces out of the runner
>Get to the backpack
>Fuck up setting up the holsters and wind up breaking one and getting a piece stuck into one of the beam sabers
>Realize what I did wrong after the fact and manage to not ruin the other one
>Make the busted one appear damaged using my brown marker, the file and by clipping into the plastic
>Realize I fucked up an arm
>Chest piece breaks in two (thankfully nowhere that ruins its stability when attached) when I take the body back apart to fix it
I'll take all the vitrol you have for me, I really did fuck up bad but please could you tell me if there's a site I can get replacement pieces from?

>>14681403

Ramba Ral's Gelgoog is from Gihren's Greed.

>>14681396
>http://www.e2046.com/p/MSZ-006C1+Hummingbird/25798/

FYI it's a garage kit, resin not plastic.

>>14681339
chars gelgoog is pretty popular

File: 1452397474677.jpg (438KB, 1280x720px) Image search: [Google]

438KB, 1280x720px

>>14681045
>>14681071
>>14681045

>purple clear parts

I can pretend they're Ether-type weapons for my Skell!

>>14681410
relatively new and am going to get 2 MGs soon (Nu ver ka and Thunderbolt), tell me anon, should I be worried, or are you just retarded?

Since when does HLJ orders require credit card? I can't pay my order with paypal since i have visa electron.

>>14681502

I think that guy's just retarded and didn't read the manual properly. That said those kits you bought are both long and pretty complex builds so I hope you at least have the basics down and don't ruin two very expensive kits.

File: IMG_20160830_165016.jpg (871KB, 1920x1440px) Image search: [Google]

871KB, 1920x1440px

>>14681502
I'm just retarded, I inserted a piece the wrong way into the holster and got it jammed. I thought it was just stubborn and tried forcing it, breaking off one piece, then I tried using the beam saber handle to force it and the bit that handle goes into snapped off into it and I couldn't get it out (I chopped a bit of one of the beam saber's insertion nub so it'd go into the handle still at least).

As for the chest, I simply pulled too hard and overestimated how solid that particular piece is.
The rest of the kit came out relatively well so far, especially the head.
I wouldn't be afraid, just don't be an idiot like I was

>>14681510
That's the thing, the manual's diagrams for the holsters didn't really show HOW it fit, just that H2 slid into B50. I'm not any less of a fucking moron for not realizing I slid it in at the wrong point though. I'm just glad I figured it out while the other holster was still ok

>>14681508
Looks like I fixed it by sending the money straight to my paypal account first. Weird because visa electron used to work just fine before.

Kinda panicked when I saw the "payment problem" email by HLJ.

>>14680999
Frame Arms are mostly fine to snapbuild. The only issue is the frame itself, and those are usually solid if they aren't the older pre-built ones. I do glue the hips and biceps together usually tho.

>>14681335
What do you mean by SEED tier?

>>14681510
I usually find that the diagrams are easy enough to understand, and I have 2 RGs that I want to build first for practice anyways.

>>14681410

I broke my origins chest too, only piece I've ever broken. I fixed it though.

>>14681519
You're painting, right?

>>14681410
Try reddit, gundamforums, hobbyfanatics, gundamstoreandmore, or bluefin.

>>14681093
>kyrios > arios > harute
You're an enormous faggot

File: f3025578.jpg (79KB, 819x1024px) Image search: [Google]

79KB, 819x1024px

Why does Super Fumina's face looks like such shit? I would have totally bought it otherwise.

I mean, look at that fucking mouth. Who OK'd this?

>>14681690
Are we not gonna talk about the sticker eyelashes and eyebrows?
That looks horrible

File: monkey's paw.jpg (126KB, 1063x1063px) Image search: [Google]

126KB, 1063x1063px

>>14681690

>>14681711
Decal eyes (including eyebrrows and other features) are almost always better than molded eyes. If they had gone with water decals or even just only stickers with multiple faceplates they would've been fine, but instead it has some weird ass partial molding going on that looks like shit on an anime face.

>>14681722

Has Bandai ever put water decals in an HG? I don't think so. And even dry transfers are rare. I think they wanted to go stickers only. But then they also wanted you to be able to paint the eyes in. And then the eyes are separate from the rest of the face. All of that adds up to disaster.

That said even if you were to address the problem of the eyes, the face itself still looks shit.

They also made it BIG AS FUCK to cheap out on making an entirely new weapon pack mold so the thing looks hilarious next to other kits.

>>14681690
This is why it needs a RG or even a PG rerelease.

>>14681722
Fuck. Is the titans version that bad too?

File: Cq1EdelVUAA3s3k.jpg (131KB, 1024x1024px) Image search: [Google]

131KB, 1024x1024px

>>14681735
Titans version is just a recolor with some new option parts. Cat ears and bunny ears.

>>14681728
>BIG AS FUCK
>can't even replace the head with a Gendum or even a figma

brutal

File: 435433234.png (2MB, 1600x1158px) Image search: [Google]

2MB, 1600x1158px

>>14681737
And a tail. That too.

>>14681728
I think really old kits pre HGUC sometimes had water decals. But even then I doubt most of them did.

If you want to the fumina to look good you should sand off the raised details, fill up the eyes, and then buy some of those anime eye decals from HLJ or whatever. I think they should include some for 6" figures, which should be acceptable for super fumina.

>>14681746
noice

>>14681737
>>14681746
Good to know it's garbage.
I'll have to buy it anyway.

File: Untitled-8.png (1MB, 1600x1154px) Image search: [Google]

1MB, 1600x1154px

>>14681751
It is our curse. Even when we know a kit's bad, if it's cute/sexy/awesome enough...

File: 44ae58_f32545bc1b3d43f186d515148bc9d8d0.png (1MB, 916x1282px) Image search: [Google]

1MB, 916x1282px

>>14681690
Looks pretty good when you paint it up. The only issue I have with it is the way the eyes are with the clear parts. If i ever get one I would have to fill the eyes holes with puddy and use a decal for the eyes.

File: 20160830_183515~2.jpg (2MB, 2905x4890px) Image search: [Google]

2MB, 2905x4890px

Working on a new SD

File: 20160828232713cc0.jpg (309KB, 745x1600px) Image search: [Google]

309KB, 745x1600px

It's worse when you consider the Figure-Rise Bust series they started up just a bit over a year later. We coulda had this for the head.

File: FAG is freedom.jpg (957KB, 2120x2485px) Image search: [Google]

957KB, 2120x2485px

>>14681751
>>14681759

Why not just get a FAG?

>>14681759
When is this coming out?

File: IMG_9277.jpg (111KB, 979x1224px) Image search: [Google]

111KB, 979x1224px

>>14681690
>>14681737
>>14681746
>>14681759
>>14681762
>>14681782

>>14681785
Because i collect Mk-II titans stuff

>>14681789
Release Date: Dec 2016, Price: 1,944 yen

File: laughter mk. ii.jpg (194KB, 800x451px) Image search: [Google]

194KB, 800x451px

>>14681797

>titans version

>>14681759
Oh she has 3 different "ties" too. A regular tie, a bow tie, and a more traditional maid tie.

Also just remember, when you consider her sexy, she's only 14 at the oldest.

>>14681448
The good thing about the kit is that its compatible with the frame arms line

>>14681817
Hasn't stopped me before.

>>14681797

You could buy a FAG and paint it in Titans colors.

File: 5d4.jpg (24KB, 600x835px) Image search: [Google]

24KB, 600x835px

>>14681073
>00 movie
>worst designs
You are the gayest cunt to have ever graced the internet, I hope you're proud of your accomplishment

>>14681830
remember if its not suited for gritty and ground combat and has any sort of sleek/futuristic look its a bad design

>>14681814
>no agp aeug Mk-II
Sorry the decision was made for me.

>>14681817
>Also just remember, when you consider her sexy, she's only 14 at the oldest.
horse.jpeg

>>14681673
Thanks, anon

File: Zabanya_Centered.jpg (170KB, 1692x1687px) Image search: [Google]

170KB, 1692x1687px

>>14681835
>sleek/futuristic look

>>14681866

NICE FENCE YA JACKASS

>>14681668
Eventually when I get paints and such, the split is just a small crack when the chestpiece is put together so a bit of paint should make it look like nothing

File: lacus07.jpg (57KB, 480x640px) Image search: [Google]

57KB, 480x640px

>>14681794
To be fair, their Lacus looks fairly good despite the Hirai-face.

>>14681817
>Also just remember, when you consider her sexy, she's only 14 at the oldest.
Where do you think we are?

Besides, her entire character design was PURE SEX. I mean a sports bra and spats are her casual wear.

>>14681866

Yeah, Zabanya is shit. But the other 00 movie designs are fantastic.

File: Raphaelhqssp.jpg (241KB, 699x1073px) Image search: [Google]

241KB, 699x1073px

>>14681875

>>14681875
Fuck you I love the Zabanya

>>14681873

Too bad they pussied out and gave
her the worst of both worlds with the Super Fumina. A maid/waitress outfit that covers up the form fitting splendor of her default outfit but then they stick the spats on anyway to remove pantyshots.

>>14681877

But anon that design is absolutely fantastic in motion.

>>14681882
So is Zabanya. And Harute for that matter.

>>14681873
That's pretty cute

>>14681892

I like Harute though and its design makes sense when you realize it's never supposed to touch the ground ever, same as the Raphael. The Zabanya though is simply ugly. I assume it's intentionally ugly because it looks the most half-finished of all the movie Gundams.

>>14681794

He looks like you walked in on him while he was on the shitter.

So if I want to apply a waterslide to a painted piece, can I apply the slide directly or do I have to glosscoat the piece first, then put on the decal?

>>14681915
>do I have to glosscoat the piece first, then put on the decal?
do that

>>14681902
On the shitter in a very small stall

>>14681794
He looks like he either needs a sweater or to be left alone while shitting.

File: 1471834498243.png (475KB, 584x568px) Image search: [Google]

475KB, 584x568px

>>14681817
Old enough to bleed, old enough to breed.

File: 1471920262382.jpg (12KB, 233x231px) Image search: [Google]

12KB, 233x231px

>>14681817
>she's only 14 at the oldest.

>>14681794
>>14681902

I would just get him and not put him on the base, then have him stuck in things like cups and spare toilet paper rolls

File: 51NipFGoOnL._SX425_.jpg (42KB, 425x425px) Image search: [Google]

42KB, 425x425px

>>14679241
What DVD comes with this?

https://www.amazon.com/Guntank-Gundam-Special-Included-Bandai/dp/B000JSIBO0/ref=sr_1_7?s=toys-and-games&ie=UTF8&qid=1472604716&sr=1-7&keywords=gundam+guntank

File: IMG_9598 (1).jpg (111KB, 979x1224px) Image search: [Google]

111KB, 979x1224px

>>14681873
>>14681896
It's not too bad.

>>14682009
>no Kimono version
Goddammit.

File: IMG_9600.jpg (136KB, 979x1224px) Image search: [Google]

136KB, 979x1224px

While we're showing these off...

File: IMG_9608.jpg (104KB, 979x1224px) Image search: [Google]

104KB, 979x1224px

>>14682025

File: Untitled-23.jpg (488KB, 719x941px) Image search: [Google]

488KB, 719x941px

>>14682029

>>14682009
I think i have her gundam in a box somewhere

File: MSVR-Johnny-Ridden-v12-001.jpg (447KB, 1129x1600px) Image search: [Google]

447KB, 1129x1600px

>>14681260
preach

File: [Manko] Mobile Suit Gundam Thunderbolt - 04 [7DA8CA89].mkv_snapshot_00.09_[2016.07.06_04.36.52].jpg (88KB, 1280x720px) Image search: [Google]

88KB, 1280x720px

>>14681260
>Origin or Thunderbolt ver Gelgoog never
I don't know why Bandai hates the Gelgoog so much.

>>14682241

I really want to believe they are working on it since all the OYW suits seem to be getting Revives.

File: 1471219513340.png (185KB, 456x480px) Image search: [Google]

185KB, 456x480px

>bitching about muh no gelgoog when the 2.0 is a superb kit

>>14681817
>Also just remember, when you consider her sexy, she's only 14 at the oldest.
Where the hell do you think you are

>>14681873
Her design was wasted, I am in despair.

>>14681735
Is the titans version p-bandai?

>>14682273

Maybe they want an HG 2.0, dickbutt.

>>14682281
Maybe stop being a picky bitch

>>14681297
gotta eat big to get big cmon

>>14679241
>Is the titans version p-bandai?
If i remember correctly it is p-bandai

>>14682294
Good, so it'll come out on SG p-bandai at some point (hopefully it won't sell out as fast as the MG Heavyarms)

>>14682294
Ment for >>14682277
These mobile apps are garbage.

File: razangriff.jpg (292KB, 851x1234px) Image search: [Google]

292KB, 851x1234px

>>14682297
>using mobile apps instead of a standard browser
Is there any advantage? Maybe I'm too much of a luddite.

Anyway, what is the beefiest gun-encrusted plamo available? I already have the MG Heavyarms, but I need something that looks like this.

>>14682273
>MG 1/144 Gelgoog Ver 2.0

>>14682322
>implying I ever stated it was an HG

>>14682315

You could buy one of those fat Armored Core V kits and then strap a bunch of M.S.G/Frame Arms expansion packs to it for the other shit.

File: FA096u.png (502KB, 768x575px) Image search: [Google]

502KB, 768x575px

>>14682315
The old app i used made browsing 4chan on mobile a breeze. This new one is garbage.
Have you looked at the full armor unicorn gundam?
It's not as gun encrusted as the heavyarms tho.

>>14682341
I bought the Full Armor upgrade kit for the PG unicorn, I'll need to put that together at some point.

File: plamo.jpg (941KB, 1487x1503px) Image search: [Google]

941KB, 1487x1503px

How difficult are these to assemble compared to an MG kit? I assume I should build a couple practice models first since I've never done it before.

>>14682330
The rest of us were talking about HGs so why even chime in?

>"I really wish I had an orange."
>"Why do you want an orange when apples exist??"

>>14682336
Oh yeah, I forgot about that, better plan my purchases. Do they all have the same number of hardpoints or do some have more than others?

>>14682346

Not that hard but I hope you like stickers out the ass.

>>14682351

I think Armored Core kits have the same amount of hardpoints in the same places. 2 on the back 1 on each shoulder. At least that's how it works in the games. Dalong has done reviews of them so you can check for yourself.

File: stickers.jpg (901KB, 2010x1498px) Image search: [Google]

901KB, 2010x1498px

>>14682359
I'm sure it will be fine

File: 1430242406299.gif (3MB, 264x192px) Image search: [Google]

3MB, 264x192px

>>14682347
>I want an apple
>here's a bigger apple
>NOOOOOOOOOOOOOOOOOOOOOOOO >.<
whatever you say retard

>>14682273
Ignoring actual values for a second
>i want some shinier silver
>lol dude just take some gold
>but i dont want gold
>wow fucking picky bitch

>>14682393

Mother of God

>>14682430
>tries to enter a 1/100 MG in a 1/144 contest
>"stupid fucking judges disqualified me, why can't they figure out how much better a master grade is?"

>>14682436
I am worried about the tiny stickers.

No reason in particular, but I tend to lean more towards rg kits than mg. What about you guys? I know mg is more popular, just curious.

>>14682457
See how they scrape off when transforming.

>>14682463
I like RG details but I have hamhands.

File: RX-160_Byarlant_-_Front.jpg (816KB, 1678x2202px) Image search: [Google]

816KB, 1678x2202px

You have 10 seconds to explain why this guy doesn't have a HG.

>>14682510
japs have shit taste

>>14682465
>See how they scrape off when transforming.
Please no

>>14682510
Could get a p-bandai soon. If it does, I'll happily buy it.

>>14681291
Keep forgetting about the gel good with zaku flipper visor and scope.

File: TB2CtVXoFXXXXc8XpXXXXXXXXXX_!!24592275.jpg (123KB, 750x563px) Image search: [Google]

123KB, 750x563px

yes or no?

File: h147_01.jpg (105KB, 846x600px) Image search: [Google]

105KB, 846x600px

>>14682510
But it does have an HG.

>>14682528
sure if you're removing pieces an inch away from the piece and doubling back with real clippers. seems a bit pointless and has the potential to wrench little pieces off and break them

>>14682522
...gelgoog I need to remember phone auto corrects...

>>14682528
Dremels are nice for smooth sanding of cylindrical parts. Works just like a mini lathe.

>>14682537
Why haven't you disabled autocorrect yet?

File: byalant.jpg (675KB, 990x709px) Image search: [Google]

675KB, 990x709px

>>14682532
the Zeta version does not have an HG. its more confusing because we have the Custom version. a little change here and there and thats 2 models for the price of one.

>>14682548

What an excellent idea anon, that would make a pretty good P-Bandai exclusive, won't it?

File: end this world.jpg (176KB, 1024x576px) Image search: [Google]

176KB, 1024x576px

>>14682556
Don't
You
Fucking
Dare

>>14682443
>never mentions entering his autism gelgoog in a competition
>gets mad when someone didn't confide in his autism when he didn't even specify
truly a child

File: 14174.jpg (309KB, 770x578px) Image search: [Google]

309KB, 770x578px

>>14682510
>>14682548

The Byarlant is 1 of 6 Zeta designs that still has yet to receive a modern kit... And given how well Zeta era stuff tends to sell, I imagine that it would be a high priority next time Bandai decides to make a new kit for that series.

File: 20160830_235752~2.jpg (908KB, 1791x2861px) Image search: [Google]

908KB, 1791x2861px

I figured I'd start figuring out my group build tonight, and ended up with this thing. Partially inspired by the Heavy Armed type Geara Doga, it's just the HGUC with those missile things from the 1/100 Chaos Gundam and one of the Buster's rifles. I'm gonna go in and make the rifle a bit more Zeeklike, and maybe whip up a halberd like weapon from one of the Sinanju's beam axes and a Kotobukiya polearm.

Need to find what I did with the command type helmet, otherwise I'll make up a new horn.

>>14682595
Please don't tell me you're entering your own group build, dude.

>>14682619
It's fine as long as it's judged by anonymous vote. In fact, it SHOULD be judged by anonymous vote.

>>14682632
I agree with this idea, anonymous vote means that not only can people who didn't enter vote, we can watch the results live, if the polling website allows

>>14682619
I'm not counting my build in the entries for the prize pool, if that's what you mean. Just because I'm organizing the thing doesn't mean I can't build a kit for it for fun.

>>14682632
It was originally gonna be judged by myself and a friend of mine who also builds gunpla, but I like the sound of anonymous voting too.

File: [Kamigami] Kidou Senshi Gundam UC Unicorn - 07 [BD 1920x1080 x264 AAC(Jap,Eng) Sub(Chs,Cht,Jap,Eng,Fre,Spa)].mkv_snapshot_00.05.46_[2016.08.15_08.53.42].jpg (106KB, 1920x1080px) Image search: [Google]

106KB, 1920x1080px

Has anyone built pic related.

>>14682647
Not entering your own design into the prize pool removes some conflict of interest. Still, a vote would be best. And of course, I don't see why you can't enter a build for fun.

>>14679358
bootleg PG Phenex to round out my Unicorn and Banshee PG collections. It's coming in a couple of weeks.

File: 10338476p.jpg (183KB, 775x1200px) Image search: [Google]

183KB, 775x1200px

Is the 1/100 Barbatos worth getting or should I wait for the MG?

>>14681690
I wonder if Bandai think a Mirai, Shia or Gyanko would not sell well at all.

>>14682743
I honestly didn't like it.
It has an underframe that you build and snap all the pieces to making the kit boring.
Also no mace.

>>14682743
it's just a scaled up HG, so unless that's what you want, wait for the MG

>>14682545
I rarely reply on phone, usually just browse for a kick in the muses but to get to work. Or I'm just waking up or shutting down for the day. Autocorrect is handy unless it's a name or something from an anime.

File: 1367622394124.gif (999KB, 250x251px) Image search: [Google]

999KB, 250x251px

>>14679241
Anyone know of a good high grade kit with something you could try to pass off or slightly modify to make a wolf's head?

File: 72c.jpg (18KB, 600x450px) Image search: [Google]

18KB, 600x450px

>>14682743
>should I wait for the MG?
>bandai making one MG that not are RX-78-2 / zaku recast

well better take a sit you´ll wait for sooooo long.
sorry for the bad english

>>14682663
Yes, someone on 2chan did when the OVA came out.

File: 1394815612331.png (43KB, 400x339px) Image search: [Google]

43KB, 400x339px

>Cut RG Zaku II leg tube out of the gate.
>It snaps in half with absolutely no pressure.

I don't have the picture of Kamille autistically shrieking. So just pretend I posted it.

What would you even use as top coat for the RG Sinanju, while keeping that glossy shine it has OOB?

I remember seeing this discussed in one of the threads and people were saying gloss is a no-go for some reason I can't exactly remember. I guess I'm just asking for clarification.

>>14682346
>>14682393
Do not underestimate the stickers, they can fuck you over if you place even slightly off.

Other than that you'll be fine, just be sure to panel-line before putting them on, the lines will give you a guide to applying the stickers correctly.

File: [autistic shrieks].webm (514KB, 984x720px) Image search: [Google]

514KB, 984x720px

>>14682907
There are many different autistic shrieks, you'll have to be specific.

File: 1395864916865.jpg (3KB, 125x93px) Image search: [Google]

3KB, 125x93px

>>14682935
The one where he's tearing up in the Zeta Gundam and screaming.

File: [autistic shrieks].gif (1MB, 480x351px) Image search: [Google]

1MB, 480x351px

>>14682942
Here, let me encapsulate your pain.

File: 1455502402138.jpg (60KB, 800x790px) Image search: [Google]

60KB, 800x790px

>>14682942

>>14682935
>>14682945
>>14682946
I love the faces kamille makes

>>14682926
Should I assemble the entire thing before I panel line and sticker or should I do that in sections?

>>14682958
Assemble, panel line, then sticker.

File: 1450136014908.jpg (52KB, 640x480px) Image search: [Google]

52KB, 640x480px

>>14682946
>>14682945
That's the bitch. That's how I fucking feel right now. I've never had an RG that didn't fuck up somehow.

>>14682961
Thanks senpai. I'll try not to fuck up the stickers too bad.

File: naked vf-31.jpg (65KB, 803x600px) Image search: [Google]

65KB, 803x600px

>>14682958
when I was building my VF-31J, I applied stickered everytime I finished a major section (ex. Stickering up the cockpit when I finished it's assembly and so on). However, this was largley a huge mistake for the main body of the plane, since I ended up messing up the placement a bit on some stickers due to not knowing how it would look completed.

In general, I'd recommend applying stickers to the legs after completing their assembly and before attaching them to main body. For everything else just wait until you're done building the whole thing. Don't be me.

File: sieggy.jpg (80KB, 900x553px) Image search: [Google]

80KB, 900x553px

>>14682958
>>14682980
I forgot to mention, you're fine just panel-lining the sections as you assemble them, there are a few that would have been a total bitch to reach/require fiddling to line if I had waited.

When will Mirage's VF-31 come out?

>>14682632
This will lead to people samefagging votes, letting the guy judge the contest himself is fine since it is solely his money being used.

>>14682989
but can you really samefag votes in those polling websites which give one vote per unique IP? I don't think the voting would be done in thread

>>14682995
It really isn't difficult to get around that type of "protection" on free platforms. I doubt he'll go out and use a paid service.

>>14682989
If it's just that guy and his friend judging, people will bitch about the shittiness of his taste when things they don't like win. Anonymous votes protect them from that, if nothing else.

>>14682984
Thanks. I'll take it slow.

>>14683005
I'd rather whoever is funding the prizes make the decision. Voting is fine if it's at least controlled and whoever is paying for the prizes is ok with it, but when you're on 4chan of all places you're guaranteed to have some scumbag cheat the system. Just look at secret santa grinching over on /toy/

File: intake.jpg (58KB, 575x500px) Image search: [Google]

58KB, 575x500px

>>14683011
Also, when applying the stickers around the intakes (right behind and beside the cockpit, be sure to partially transform that bit so its not covered by anything else. The sticker goes below what you can see in jet mode.

>>14683018
True, he should have the final say. I hope I'll have enough time to finish.

File: 1371500679100.gif (1MB, 320x213px) Image search: [Google]

1MB, 320x213px

>>14682869
No takers? Been looking all over and haven't been able to find anything close so far

>>14682869
>>14683041
How about the Bucue from SEED? If it has a kit.

>>14682273
I found the HAMHANDS

>>14683154
>this is probably coming from an amerifat
lmao

>>14683155
I bet you played with duplo blocks until you were 13 because your parents didn't trust you with legos

>>14683158
Who are you quoting?

>>14683146
That might work. A good option for now but I'm going to look for something that matches slightly better. Thank you a lot though anon

>>14683168
Is that the rg?

What's the best kit for a straight build?

>>14683186
0 Gundam is a good starting point

>Cheap af
>Requires minimal work for a good result
>Refreshing take on a classic design
>Extremely flexible

>>14683181
no MG

All this talk of gelgoogs makes me want one. Should I get the Char's Gelgoog v2.0 or the MP Gelgoog v2.0?

They seem identical except for color.

>>14683196
Trust your penis

Fuck guys I'm going through plastic crack withdrawl

I'm studying abroad and there is no gunpla in sight.

is the 1/100 highduck any good? is there a 1/144 option that isnt ass

>>14683202
But I've already bought all the FAGs and I'm booking a hooker for the weekend.

>>14683196
wait for the revive

>>14683203
Think of the positives: you can save up for a PG.

File: waiting.jpg (114KB, 642x683px) Image search: [Google]

114KB, 642x683px

>>14683208
And end up like this guy?