AR Thread /ARG/ tripfag containment

File: 8-19-17 DSC_0202.jpg (2MB, 2400x1595px) Image search: [Google]

2MB, 2400x1595px

>>35166088
Thank God

>>35166088
Thank

God bless you for not making me go to his thread.

File: 1504237488769.jpg (2MB, 1568x879px) Image search: [Google]

2MB, 1568x879px

Thank fucking christ oh my god

File: ThisKillsAsh.jpg (127KB, 830x585px) Image search: [Google]

127KB, 830x585px

>>35166117
this

File: lms vfg.jpg (268KB, 600x918px) Image search: [Google]

268KB, 600x918px

Yay baby!

Praise him!

File: farcry4fanboy.jpg (2MB, 3456x1945px) Image search: [Google]

2MB, 3456x1945px

Our Savior

>calle

>>35166148
gj you discovered the hue slider

Is Bobro the best for the money or is there a better option?

>>35166151
Hey, be nice

>>35166158
Bobro is best unless you take the Sphurpill

File: CIJOoKcUkAAFy8b.png (18KB, 530x492px) Image search: [Google]

18KB, 530x492px

>>35166165
kek

File: IMG_20170803_182558248.jpg (161KB, 1152x648px) Image search: [Google]

161KB, 1152x648px

>>35166176

File: 6300202+_b281fc7449a152659cb49d4731b1cb4c.jpg (79KB, 640x542px) Image search: [Google]

79KB, 640x542px

>>35166158
larue
what are you fucking gay

>>35166176
no no no
stay in your own containment thread

>>35166176
No one wants you here, go back to your thread

>>35166166
All good, and I'm not taking that pill. I'll do Bobro but anything higher is not for me.

>>35166184
Do I get the bottle opener with the mount?

File: IMG_20170903_153637787.jpg (389KB, 1152x864px) Image search: [Google]

389KB, 1152x864px

>>35166184
>>35166187

>>35166194
yes
and anything else
i have like 10 of them

>>35166202
How much even was your completed rifle

>>35166215
>completed

>>35166211
Oh damn. Might have to go with Larue.

>>35166229
>tfw didn't order soon enough to get the 2016 holiday dillo

>>35166215
havent got my new rail, new front sight, scope, and light yet so I dont know how much the rifle costs.

>>35166229
dillodust mounts are quite robust

>>35166244
So robust they test the robustness of your pic rail yeah

File: 313.jpg (77KB, 724x1024px) Image search: [Google]

77KB, 724x1024px

>>35166229
oh yeah and the dillodust meat seasoning, the 3 pocket constitutions and possibly some dumb paint mixer that actually works really well if you ever actually use it

>>35166234
Whats the holiday dildo?

>>35166248
>3 pocket constitutions
I'm a fan of that.

>>35166242
Stop dodging the fucking question and tell me how much that rifle in the picture cost and not future trashgrades your gonna do to it

>>35166251
It was green and said happy holidays on it. Rare. Mine's just the basic black dillo.

>>35166252
idk how much I have in it. I think I have $900 into it.

>>35166242
You made a thread first and people willfully chose a later one
LOLOLOLOLOLOLOLOLOL
is there anyone hated more on /k/?

>>35166251
they're also inflammable
that turbomanlet skeletor tried to burn them

>>35166256
I'm a sucker for that ltd shit. I've got time to set money aside for a scope/mount now that the property tax is out of the way.

>>35166252
>⭕

>>35166270
What a fag

File: 20161021_120227_resized_1.jpg (72KB, 450x800px) Image search: [Google]

72KB, 450x800px

>>35166246
So will bobro when the recoil lug breaks

File: 1503805593108.jpg (98KB, 409x409px) Image search: [Google]

98KB, 409x409px

>>35166280

>>35166277
i sent him some more with that rail he bought from me

>>35165913
Oh, okay then.
>That image
Top kek.

Anyways onto the continuation. Sorry if this is a bit anticlimactic. I typed up a bunch more stuff but I've decided not to include some of it. Basically it comes down to the fact that this is an archived, public forum and I'm not willing to risk the more astute of you might figure out what company I'm talking about and expose me. I'd like to think you guys would respect that I've chosen to share this shit and that I could potentially get fucked for "leaking" it but we're dealing with the lowest common denominator here and this is 4chan after all.

Anyways onto the stories:

>>35164795
Hmm okay. Nothing else illegal springs to mind immediately although some of this shit should be IMO.

Let's start out light and entertaining. So one time some random dude emailed one of the CS guys with no prior contact saying "Hey asshole, send me a dealer application form." That's paraphrased and the actual message might've been longer but I don't remember, the wording is probably like 95% accurate though.. The CS guy actually printed it out to show other people and it gets passed around every once in a while. Oh yeah, that guy never got his dealer app IIRC.

I bring up this story first because for this anecdote and many others I really regret not bringing my phone to work for photographic evidence of some of this shit. I didn't for several reasons.
1) Cell phones we're not allowed.
2) The rule was somewhat lax but my manager was the biggest hardass about this rule in particular.
3) The place has video surveillance and taking photos of shit would probably be a good way to get fired and probably sued or some shit.

Cont.

>>35166270
That's great. What a fucking pecker neck.

>>35166280
>tainless
perfect accompaniment to an OLT

File: B10-300-300_05.jpg (2MB, 4707x3138px) Image search: [Google]

2MB, 4707x3138px

>>35166280
>>35166284
NEVER trust a company that uses Phillips head screws on anything

>>35166301
wow, glad I saw this

Anyone know of a 2-10x32 with CAPPED TURRETS in the $1000 range?

>>35166301
wtfff

File: 20170710_olt.jpg (620KB, 1600x900px) Image search: [Google]

620KB, 1600x900px

>>35166088
Posting in the real thread

>>35166309
x44 yes, x32 no

File: 1497913773207.jpg (834KB, 1800x1200px) Image search: [Google]

834KB, 1800x1200px

>>35166309
1600

>>35166323
>posting in the Ash thread
We all make mistakes

File: 5F10E344-C491-4D57-BA0F-F08789A48926-8213-000008D744F20DD1.jpg (128KB, 1200x800px) Image search: [Google]

128KB, 1200x800px

>>35166088
can anyone tell me what this handguard is? plz thank you

>>35166290
4) Some people would use their phone in their car on break but being a weapon manufacturer there were a ton of gun mags around that the mags send to the company for free as samples because we pay for advertising. Why is this relevant? Where normally breaks without my phone for entertainment would be boring af, I had plenty of gun mags to read. Plus after people had read them it was totally cool to take whatever ones home that you wanted for free (they were nice mags too, recoil, ballistic, etc in addition to your more typical gun mags and hunting centric ones).

>Pic related, a few magizines I took. The Japanese one was kept strictly because I thought it was funny, it's from 2006 so pretty old.

Every once in a while you'd get your shitty anodizing colors (light grey, purple, blue instead of mil-spec black). Most of the time this wasn't a huge deal and it went out (still wouldn't be happy personally if I got something with some of those colors). The worst example I saw from before my time was some parts that were like a grey similar to tungsten cerakote but with a sky bluish tinge (if you can imagine that in anodizing) AND THIS WAS SUPPOSED TO BE A MIL-SPEC MATTE BLACK ANODIZED PART!

I didn't experience this firsthand but I overheard multiple times (again from high up reliable sources) the story of "The accuracy problems after the switch to QPQ barrels (from being chromed previously)." This really cemented for me what quality companies mean when they say that nitride is very good but it is very important that the nitride is being done right. This was a case of a third party doing the nitriding (pretty common) but not being better before hand or chosen simply because of proximity. I don't know the specifics of this not do I know if any of the shitty barrels actually went out to customers and if the complaints about poor accuracy were from customers or internal frustration.

Cont.

>>35166347
colt

>>35166347
Advanced Colt Carbine Monolithic

>>35166349
Was going to upload the pictures as I posted but I'm phoneposting and my upload is shit so I'll dump them later when I have decent internet. Pretyped this so that's why there's inconsistencies where I say.
>Pic related

>>35166338
CAPPED TURRETS!

File: Wojak3.jpg (270KB, 800x601px) Image search: [Google]

270KB, 800x601px

>>35166368
>>35166369
thanks boys!

>>35166349
While assembling one of the suppressors I decided to look down through the baffles. What did I discover but rust patches on the edges baffle cone towards the center where the bullet travels through. Some were worse than others and not all had it but a good majority of the baffles had at least some rust all in this same spot. Not certain but I believe they were 17-4ph steel baffles (does Income even rust?). This was quite alarming to me and when I brought it up after checking and discovering how widespread the issue was (I kinda figured maybe it was just a one-off at first) the response I got was "Huh that's strange, it shouldnt rust." Don't know if anything was ever done about it, I honestly don't recall but I think brushing it off might've been mentioned. Sure I understand it's a gun part and it's gonna be dirty as fuck as soon as a customer gets it but it being rusted from the factory bothers me. These are the only supressors I've handled, is this normal and I'm just over reacting?

Parts were rarely blemed unless they flat out wouldn't work or were very obviously broken, those were set aside in a special box and discounted for employees. Examples include pitting and dings in anodized aluminum parts. These were regularly allowed to go out the door with the rationale of "If the customer doesn't like it they will return it." Zero care for their image or putting out a quality product; profits were the bottom line, every time. Birchwood casey super black paint pens were a staple in the assembly dept (At A FUCKING PROFESSIONAL MANUFACTURER). To cover up imperfections in anodizing, scratches, etc.

It was truly eye opening to see some of the shit that goes on behind the scenes. This is only a sample size of one company but it really makes you think and question where you're buying shit from. The scary part for me is this is a generally pretty popular brand that I've even seen recommended here.

Cont.

>>35166088
What parts kits you fags use?

>>35166395
Large part of the reason I no longer work there is that I took issue personally with their business practices. A focus on cranking shit out versus doing it right. Bringing up quality issues to a supervisor who would 90% of the time just say "Let it go." because he himself didn't want to bring it to his boss only to be told "let it go" because the boss above HIM (who coincidentally had big man syndrome and abused his position to be an asshole to everyone) would just say to "let it go". This ties back to the profit over quality. Basically they couldn't be assed to mention even things he thought were questionable because after working there for nearly a decade he was tired of hearing "let it go" from his boss, and bosse's boss. Obviously this should raise eyebrows if you understand manufacturing, this is how shit gets let by that really shouldn't. I did the right thing most of the time by focusing on quality as much as I could and bringing up any issue I thought was significant, I even took to singing "Let it go" from Frozen in my head on particularly bad days. This of course impacted my speed versus the other wage slaves (in assembly) who largely had zero interest in guns and/or simply didn't care and did what was necessary to make rate.

The suppressor department didn't have near as many glaring issues (I WOULD FUCKING HOPE SO) with much closer attention to QC and blem issues so at least there is that. The rust issue was the only issue I can recall that I don't know for sure was addressed, most of the shit I brought up there was either legitimately not a big deal or was set aside to be corrected.

In the end, I'm glad I don't work there any more. It was really cool to work with firearm stuff but in my singular example I didn't really get to do any cool shit (like test fire the fully automatic guns or cans), the benefits weren't great, no real discounts (that's a whole 'nother topic), and it just wasn't worth the fucking headache.

>>35166387
why?

File: DSC02057[1].jpg (876KB, 1784x1000px) Image search: [Google]

876KB, 1784x1000px

>>35166270
fact, terrible firestarters.

>>35166406
That's the end boys. Sorry if you dont care and had to scroll past my walls of text, but caliper anon asked so I delivered. I think it's worth reading if you have time but I'm biased of course.

>Pic dump of Japanese gun magazine later. Some qt3.14s in there if you're into Asian women with guns.

>Calle

>>35166408
Cause I want what I want and I want it now

>>35166489
why?

Has anyone here attempted making a build with a 4-14x on top and an offset 1-4x?

>>35166497
Koz

File: IMG_20170628_225046-1.jpg (2MB, 3138x3269px) Image search: [Google]

2MB, 3138x3269px

>>35166272
>>35166272
What did you order to get all this?

I only got pic related with my MBT.

>>35166536
looks like the trigger without the sale price.

>>35166529
explain

File: 1504138976704.gif (2MB, 202x360px) Image search: [Google]

2MB, 202x360px

>>35166523

>>35166536
Is it just chance whether or not you get that neat trigger apparatus with your MBT?

>>35166555
They had the MBT and the trigger testing thing for $99 a couple of times.

>>35166552
stranger things have been done
>1-14x effective range

>>35166555
you literally just missed it, ended 2-3 days ago

>>35166536
Ordered the mbt in a rush

>>35166132
oh shit i dig that receiver, what brand ?

>>35166588
That gun would weigh a lot you would be better putting a rmr off set and just do the 4-14x on top.

>>35166555
It's always rough when such a fine get is wasted on a question, let alone one from Matey.

>>35166542
Koz I don't trust no dag blasted "lockin" turrets on no dag nabbit $1000 scope

>>35166603
All LMT my dude

>>35166607
I'm not asking from the standpoint of it being a serious idea, I'm just wondering if someone has tried it, as a joke or otherwise.

File: DSC00526.jpg (3MB, 3024x1702px) Image search: [Google]

3MB, 3024x1702px

>>35166594
Shieeet

>>35166609
>caring about gets
Go back to /b/, you pathetic ugly duckling

>>35166607
What kind of pathetic DYEL are you? I run an offset 20-60x on my AR-10 with an underslung range finder and a rear view mirror on the 3 o'clock rail.

>>35166651
He is a weak faggot with shitty ausage fingers

>>35166176
What red dot are you running on there?

>>35166655
a piece of shit bushnell

>>35166654
sausage*

File: ARs.jpg (1MB, 3264x2186px) Image search: [Google]

1MB, 3264x2186px

>>35166662
Lol. werent you giving me shit earlier for using a sig micro?

Practice what you preach bucko

File: What.jpg (537KB, 2560x1920px) Image search: [Google]

537KB, 2560x1920px

>>35166671
I have that on a .22 I put it on my AR because people were bitching that I dont have a scope.
>>35166651
Is you in the army?

>>35166671
>listening to trAshly ever

>>35166695
a2s trigger me

>Meticulously Burred Trigger

>>35166272
is this the standard MBT loot crate?

Anyone ever mount their vertical foregrip on the side of their handguard to see what it feels like? I feel like you could really troll the other people at the range if you shot like an autist

File: hqdefault.jpg (41KB, 480x360px) Image search: [Google]

41KB, 480x360px

>>35166813
your autism is outdated

File: onlypretending.png (3KB, 698x1284px) Image search: [Google]

3KB, 698x1284px

>>35166813

File: sbcfg.png (88KB, 1264x645px) Image search: [Google]

88KB, 1264x645px

Reeee give me foregrip

>>35166835
Hey I want one! My AR NEEDS this.

File: daniel-v7-defense-3.jpg (22KB, 1000x302px) Image search: [Google]

22KB, 1000x302px

>>35166088
Bless u op

Now that we're in a new thread, how much of a meme is Daniel Defense? I'm shopping for my first AR, and I've heard good things and fired pic related.

Im looking for buis, what should i consider?

File: ls3Wqdu.jpg (540KB, 1800x1200px) Image search: [Google]

540KB, 1800x1200px

>>35166852
Not enough good mlok foregrips on the market

>>35166861
its great, their stocks are a joke though, 70 bucks for that piece of shit is bullshit. same with grip. everything else is fine

>>35166861
Just get a bcm. Dd is a little overpriced

Did anyone just get an email from eotech about a class action settlment? They gave me a coupon for $22.50 off eotech products. Im not going to ise it but i thought this was settled long ago

File: 1495347401513.jpg (71KB, 720x960px) Image search: [Google]

71KB, 720x960px

>>35166861
DD is fantastic, a bit pricey however, and their furniture is less than ideal.
>>35166871
KAC, Magpul

>>35166405
I just built one using battle arms controls and pins, and everything else was either from an oops kit or a bin at the lgs. And a cmc drop in because on sale.
Very pleased with battle arms.

File: avSO74a.jpg (398KB, 1920x1040px) Image search: [Google]

398KB, 1920x1040px

>>35166884
>DD is overpriced
>get a bcm

>>35166893
are those offset sights a thing?

File: 2017-08-19 22.33.21.jpg (1MB, 1920x1440px) Image search: [Google]

1MB, 1920x1440px

>>35166909
you git and stay git nerd

>>35166893
>comment on the merits of DD
>post DD cosplayer in Hawaiian shirt

Top kek, Master Miller.

File: 20150808_165926-1_zpsyqvwshj8.jpg (533KB, 1024x600px) Image search: [Google]

533KB, 1024x600px

>>35166941
Yes however its an extremely niche thing and I wouldnt recommend it, especially for irons

>>35166884
Shit, this rifle from Bravo has everything I wanted and nearly everything the V7 has, and it MSRP's for ~$100 cheaper. I'll keep this in mind, anon.

https://shop.bravocompanymfg.com/BCM-RECCE-16-KMR-A-Carbine-AR15-Bronze-Cerakote-p/bcm-carbine-750-790-brz.htm

>>35166813
Yes, and the KAC grip feels great that way.

>>35166998
Oh good lord no.

>>35166998
You want a kmr and a shitty stock?

>>35166945
better keep an eye on this, paul demands your gbp

https://www.bravocompanyusa.com/BCM-MMR-13-M-LOK-Compatible-Free-Float-Handguard-p/bcm-mmr-13-556-blk.htm

I should do a 9mm AR pistol.

File: anfofmposg.jpg (339KB, 1600x900px) Image search: [Google]

339KB, 1600x900px

>>35167062
nah. dedicated subguns are more fun

File: MRONI-G17-2.jpg (39KB, 500x282px) Image search: [Google]

39KB, 500x282px

>>35167062
Why do that? Roni already did that for us. :^)

>>35166861
Get a DD upper and a complete LMT lower

>>35167097
>>35167111
I was thinking about one of those PSA 9mm glock lowers with a Maxim brace.

File: 17493757_2267480353476158_5272968221593436160_n.jpg (126KB, 1080x820px) Image search: [Google]

126KB, 1080x820px

>>35167138
This and an echo trigger

>>35167150
MPX's get a shit ton of gas blow back while shooting suppressed, also expensive as fugg for what youre getting

>>35167186
Gen 1s had a lot of blowback. Theyve gotten that licked since

>>35167186
This. I think the PSA 9mm AR would be better suited to what I want, and I already have glock mags.

>>35167117
This, but get the mars ower

>>35167203
Has it? Havent used it since the gen 1 so thats cool to know

>>35167222
This, but an LMT upper too

>>35167021
Whats wrong with bcm stock?

>>35167251
can't argue with that

>>35167246
Gen 1 was pretty bad with like 75% of all cans. Gen2 they did something to solve that with almost all cans

File: 2017-05-21 14.28.50.jpg (1MB, 1920x2560px) Image search: [Google]

1MB, 1920x2560px

>>35167053
gonna keep rocking the shelfmod till i fuck it all up then go MMR or the quad

>>35167327
They are eternal

>>35167327
the quad looks neat, only 14 ounces

>>35167097
Agreed. m8

File: Pmag.jpg (401KB, 1920x1280px) Image search: [Google]

401KB, 1920x1280px

>>35167384
i always seem to have quads though. Kinda liking the keymod light rail right now. Only problem is that when it gets hot, it gets FUCKING HOT.

>sure is lonely in TS right now

>>35167384
pics?

>>35167413
>not your entertainment
>try netflix

File: 2017-03-31 02.07.04.jpg (921KB, 1920x1440px) Image search: [Google]

921KB, 1920x1440px

>>35167429
>thinks an anon can carry on a conversation
>can't even bully worth a shit
>paying for entertainment

stay anon my anon

>>35167420
he's lying
it looks like trash
https://www.bravocompanyusa.com/BCM-BFH-16-Mid-Length-Upper-Receiver-Group-w-BCM-p/bcm-urg-mid-16-bfh-qrf12.htm

>>35167449
fag

Easily top quad, only other non shit quad on the market is larue

File: DSC_0608.jpg (626KB, 1800x1200px) Image search: [Google]

626KB, 1800x1200px

>>35167476
wrong
it still uses BCM's garbage bolt up system

>>35167485
>RIS II
lmfao get out LARPer

File: 2017-08-18 12.27.40.jpg (1MB, 1920x1440px) Image search: [Google]

1MB, 1920x1440px

>>35167499
but BCM bolting system a shit

>>35167485
Sure, if you don't mind waiting months to be lucky enough to see an arfcom EE post before anyone else

That's not really what I would call "on the market"

>>35167485
>>35167514
Post a BCM rail broken at the barrel nu/cross bolts

File: worry.png (68KB, 500x374px) Image search: [Google]

68KB, 500x374px

>Get XM177E2 for all of three hours before stripping the receivers entirely and shipping them off to be refinished
Maybe by October I can enjoy my 'Nam carbine...

>>35166540
>>35166600
That would explain it, got mine for 99 dollary doos on sale.
>>35166555
Other peeps already responded but yeah, I know for sure they throw in the chassis during the sales but it's super cheap to make molded plastic so I wouldn't be surprised if they throw it in with every purchase now. I would just call and ask or if you have a phone of phone conversations search around on ARFCOM.

>>35167548
Who in the everloving fuck are you?

File: fucked.jpg (636KB, 1152x2048px) Image search: [Google]

636KB, 1152x2048px

>>35167518
the RIS II is the most robust FF quad rail ever made, but the lite rail ii is close behind

not the lite rail iii, DD fucked that all up.

>>35167529
its not that, it's this
the barrel nut is just too short.

File: WP_20170523_005[3].jpg (3MB, 3072x1728px) Image search: [Google]

3MB, 3072x1728px

>>35167485
Further proof that Centurion is still GOAT for lightweight FF quads.

File: 2017-09-03 14.40.26.jpg (2MB, 1920x1440px) Image search: [Google]

2MB, 1920x1440px

>>35167529
>not understanding the actual issue
wew lad

The largest problem with the BCM bolt up is the barrel nut and bolt system combo. The barrel nut is to short to get a proper alignment with the barrel, think concentric to bore, and the two screws that tighten pull the rail upwards. So with those two issues, when you tighten the nuts you pull the rail upwards. Its not to bad on the Alpha rails, but was extreme with the original KMRs.

take an upper with nothing on it and lay it rail side down and see how much bowing their is.

>>35167561
>exposed GI barrel nut
it's barely above MI trash

File: 2017-04-15 15.05.54.jpg (3MB, 1920x2560px) Image search: [Google]

3MB, 1920x2560px

>>35167561
>no 13.5 length
into the trash

File: WP_20170611_007[1].jpg (3MB, 3072x1728px) Image search: [Google]

3MB, 3072x1728px

>>35167570
Just lets everyone know there's a non-shit nut under there. :^

>>35167554
Top kek, the DD barrel nut is shorter than BCM's and the lateral crossbolts can pull a rail off in random directions more easily than BCM crossbolts will if assembled by careless normie retards like the one who built that rifle

File: nothankyou.jpg (272KB, 1050x745px) Image search: [Google]

272KB, 1050x745px

>>35167577
>ditching A2 FSB
No thank you.

File: 40ec2e0cef9ead1814ac6dbab6263219.png (47KB, 240x240px) Image search: [Google]

47KB, 240x240px

>>35167591
i have had 5 DD rails and literally zero problems like this

but the KMRs i had did this

keep living in denial about your shit rail.

>>35167617
Then you're an idiot who can't install a rail

File: 6376868+_833f89bc36f3458cf65acf0186d22854.jpg (35KB, 326x326px) Image search: [Google]

35KB, 326x326px

>>35167626
yeah buddy
go put a straight edge on your rail

File: 0609-CC-9.jpg (143KB, 1000x667px) Image search: [Google]

143KB, 1000x667px

>>35167596
they make a rail for the A2

>>35167617
>danielposting

>>35167649
That looks ass.

File: 23e1a6_6352400.jpg (252KB, 850x850px) Image search: [Google]

252KB, 850x850px

>>35167626
hey btw, one of those KMRs i had was on an upper build by BCM

File: nomnomnom.png (536KB, 1024x768px) Image search: [Google]

536KB, 1024x768px

>>35167655
Everyone calm down, okay?

>>35166088
AR newfag reporting

What's a good (preferably cheapish) starter AR that I won't want to trade in within a year's time, and has a good amount of accessories?

>>35167656
yeah, but still...

File: IMG_20170421_175357.jpg (4MB, 2340x4160px) Image search: [Google]

4MB, 2340x4160px

Move aside quad rail mall ninjas and shelfmod warehouse employees, best "rail" coming through.

>>35167682
Cardboard tube would be just as good and lighter

File: c4-12fsp_rail__47664.1413406403.500.659.jpg (36KB, 500x223px) Image search: [Google]

36KB, 500x223px

>>35167667
It's also not 13.5. You could have at least posted their 12" RIS II knockoff.

>>35167705
I just grabbed that one dude. cool your jets.

File: IMG_20170228_172347317.jpg (1MB, 3031x1227px) Image search: [Google]

1MB, 3031x1227px

Ahh, the monolithic lyfe

>>35167682
Are you aware it isn't 2010?

>>35167705
yours might have been halfway aesthetic if you went whit the half FSP cutout

File: anime.png (716KB, 1150x883px) Image search: [Google]

716KB, 1150x883px

>>35167665
pls respond ;-;

>>35167554
>not the lite rail iii, DD fucked that all up.
Not otherfag but what's wrong with that one? I was looking at getting a 12

>>35167665
Comes with a good amount of accessories? Nothing cheap. Get either a SW or Ruger for a first AR

>>35167711
It's the best life

>>35167729
instead of those 6 strong bolts on the RIS and lite ii, they now have 4 tiny shitty fine threaded button head bolts that strip out if you torque them only a little, or remove and reinstall them more than once.

>>35167732
Should have said
>has a good amount of compatible upgrades

as in, not just pictinny rail addons, but actual upgrades, like trigger kits, etc.
(sorry if sounds dumb. I'm not originally from US, and have only ever owned simple guns like bolt action carbines)

>>35167665
Post a budget dipdong, and dont pay for accessories as a package, thry will be shit and you'll replace them, but unable to sell them because nobody wants that crap

>>35167754
Oh so the same shitty bolts as on the mfr xs? I didn't like those

File: WP_20170710_024[3].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>35167710
>cool your jets.
Don't tell me what to do.
>>35167715
Would have looked groce.

>>35167763
I would very much like to stay under $700USD if possible. I'm ok with buying used, as well.

File: IMG_7432.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>35166088
Is this stock surefire mount any good? Should I replace it?

Also anyone of you have a UE tail cap you want to sell?

>>35167761
you can change practically anything on a gun, though its not going to come with the gun itself you have to buy it apart then install it.

i would reccoment the m&p15 and go from there, if not buy all the parts and build your own gun.

>>35167771
uh yes

>>35167776
wrong

>>35167761
A standard AR15 (like the two I just said) should be compatible with most of the accessories in this thread, requiring only minimal tools to swap out parts

>>35167776
That was a suggestion!

>>35167787
>not going to come with the gun itself
fuck my English

>has a good amount of compatible upgrades AVAILABLE

Also thank you. I'm looking at a few, now. Is there a good site to simply buy parts piece by piece? or perhaps an absolute barebones weapon that I can customize to my liking from the ground up with aftermarket parts?

>>35167695

>Implying

>>35167713

Are you aware there have been zero meaningful improvements in modular rails since 2010 besides the introduction of two competing "standards" which are only relevant for about 10 minutes until you've bought the accessories you need?

>>35167777
http://www.brownells.com/firearms/rifles/semi-auto/ac-15-5-56x45mm-nato-16-mid-length-rifle-prod82606.aspx?avs%7cManufacturer_1=AERO%2bPRECISION

Search around, or wait for it to come back in stock

File: p_100018335_2.jpg (6KB, 400x400px) Image search: [Google]

6KB, 400x400px

>>35167761
Most ARs have largely interchangeable components that can be upgraded without having to worry a lot about compatibility. If I were you I'd look at Aero precision's OEM rifle kit, that way you can choose what type of rail and stock and optics you want without wasting time and money on a complete rifle, but without the hassle of assembling most of the rifle.

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2053587.m570.l1313.TR0.TRC0.H0.Xm952v-tn+km3.TRS0&_nkw=m952v-tn+km3&_sacat=0

I would also recommend Colt's 6920 for a complete first AR.

File: 52711567400__502EB76F-CD3C-47E6-9D17-D78B9C238FA3.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

Rate

>>35167820
This is alot like what I am looking for!

>>35167820
wrong link.

http://www.brownells.com/firearms/rifles/semi-auto/oem-mid-length-16-rifle-prod81838.aspx

>>35167820
You can get Colt 6920 OEMs for $700 now

File: 654698468546546854685465146541.jpg (634KB, 1613x1210px) Image search: [Google]

634KB, 1613x1210px

>>35167825
Demsightsdoe/10

>>35167726
You can get Rugers AR556s and M&P Sport 2s for less than $600, or an Aero complete rifle for close to the same price. Generally you buy something cheap like that, shoot the fuck out of it then you build something with better quality parts and change the stuff you don't like, so like maybe you go from carbine gas to mid length etc.

https://gun.deals/search/apachesolr_search/aero%2Bac15?view=list

>>35167761
I would personally do what >>35167820
Has said.

I'd pick the Colt oem first and the Aero second. Then you pick your rail and stock of choice. You can have a nice rifle with a free floated rail and good stock for like $700 if you go with the Aero

>>35167848
Wait how does that work

>>35167837
>Colt 6920 OEM
oh wow, that's a good weapon. My range buddy has one, and I love it!

File: tumblr_o69bu3ALNO1qc0pnjo6_1280.jpg (286KB, 1280x853px) Image search: [Google]

286KB, 1280x853px

tell geissele to make QD mounts

>>35167848
Not a colt upper, don't care not impressed

File: 68468468468465435411684.jpg (902KB, 1602x1194px) Image search: [Google]

902KB, 1602x1194px

>>35167861
It doesn't yet. Waiting on the buffer tube and "brace" to get here in the mail.

File: IMG_7434.jpg (387KB, 1440x1072px) Image search: [Google]

387KB, 1440x1072px

>>35167863
And fsp rails

>>35167873
no thanks

File: basics (1).jpg (580KB, 1600x900px) Image search: [Google]

580KB, 1600x900px

>>35167862
This was a Colt OEM1, dont regret not having a waffle stock and clam shell handguards taking up room in my parts bin.

>>35167868
did you end up going with the KAK+saddle?

>>35167783
I fucking hate them, I had one unscrew its way loose and it almost fell 200 ft to a watery grave. Replace or dummy cord them.

>>35167825
the least remarkable rifle i have ever seen

File: 465416516851465163516351.jpg (1MB, 2016x1512px) Image search: [Google]

1MB, 2016x1512px

>>35167885
Yes sir, for now at least.

i want to see an APC223 with block iii on it
psi, sell your rifle you never shoot anyway and buy it

>>35167895

What's wrong with the sights on >>35167825

File: IMG_7437.jpg (36KB, 350x350px) Image search: [Google]

36KB, 350x350px

>>35167887
Any suggestions on mounts? It'll be on a Quad rail.

Any experience with S&S Precision?

File: sept.jpg (475KB, 1578x858px) Image search: [Google]

475KB, 1578x858px

>>35167783
Arisaka makes really nice, simple mounts for scout lights for like 37 dollars shipped. I've had trouble finding used UE07, lowest price I've found for the complete assembly is $75.

File: 769.png (276KB, 1204x1598px) Image search: [Google]

276KB, 1204x1598px

>>35167814
M&p 15 is one then follow this list
websites are really random depending on sales, if they accept paypal youre good to go, primary arms, red barn armory, joe bob outfitters, optics planet the main websites for parts like geissele, cryptic, magpul obvioulsy are going to have the stuff though usually they never have sales.

File: IMG_0169.jpg (555KB, 1305x817px) Image search: [Google]

555KB, 1305x817px

>>35167918
I just dislike those magpul sights. So nothing really.

>>35167933
Gear Sector

>>35167825
Pretty low. But if you're happy then I'm happy

>>35167816
>MLOK is just a fad guys, and there's no real difference between it and Keymod!
Oh no, it's retarded -and- has bad taste, enjoy your faggy tube.

>>35167938
>tfw Meprolight isn't on the list

>>35167933
>Any experience with S&S Precision?
No light mount experience but I have some of their micro shivs and they are g2g.

Gear sector is a good choice, or hsp

File: 20170809_183425.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

>walls of text
>keymod vs mlok

Can you faggots not?

>>35167933
Ive had good luck with the haley strategic
>>35167966
rightfully so

File: THE-Rifle.jpg (112KB, 1152x824px) Image search: [Google]

112KB, 1152x824px

>>35167973
>that rifle
>your opinion
t r a s h

>>35167973
Are you trying to summon wgws?

>>35167825
Are you going to be just using irons, or planning on putting an optic? Magpul MBUS are fine, but MBUS Pros, KAC micros or even griffin m2s would be better folding buis. If only irons, Scalarworks makes some fixed that might look cool on your setup.

>>35167990
What's wrong with Meprolight?

>>35167990
>>35167967
>>35167943
Thanks for the suggestions

You guys know of people that make scout heads other than malkoff? Does anyone make them in tan?

>>35168002
shit posting aside, they work fine, but are inferior to aimpoint in most ways but cost

>>35167993
Muh Dick

Been thinking about going into 416 land

>>35168000
Might throw a holosun 515c on it

Or an eotech, we'll see I'm not sure. My cash allocated for guns is pretty low between this new pistol and my pws.

>>35167973
>mek still thinks his opinion matters
your rifle is poop tier

>>35168018
feelsbadman
>tfw grandad was one of the founding employees of Meprolight
>never been able to afford their gear

File: IMG_7333.jpg (2MB, 1870x3187px) Image search: [Google]

2MB, 1870x3187px

>>35168021
Holosun makes a good little optic and you might also check out PA micro dot. I've had good results with mine thus far, but I also haven't been too hard on it. However I hear they can take a beating.

File: 20170810_185758.jpg (2MB, 2560x1440px) Image search: [Google]

2MB, 2560x1440px

>>35167993
>>35168028
Nice rifles boys.

File: IMG_7200.jpg (2MB, 1634x3227px) Image search: [Google]

2MB, 1634x3227px

>>35168044
I almost did an A4 but ended up being a fag

File: 20170611_120331 (2017x1135).jpg (1MB, 2017x1135px) Image search: [Google]

1MB, 2017x1135px

i'm welding a bunch but no one is teaching me what to do.

also, i need a welding jacket

File: 20170814_124328.jpg (4MB, 4032x2268px) Image search: [Google]

4MB, 4032x2268px

>>35167997
I would rather a hundred wgws than the new and old tripshits we have now.

CG was better than this.

>>35168061
Typical.

>>35168073
You're not welding high pressure flow lines, a retard could probably do what you do.

>>35168044
>posts objectively shit rifle
>deflects by posting an overweight meme rifle
p o o p

https://www.theguardian.com/world/2017/sep/14/north-korean-launches-unidentified-missile
RIP we gonna die.

File: WP_20170830_001[1].jpg (2MB, 3072x1307px) Image search: [Google]

2MB, 3072x1307px

>>35168061
At least you're honest with yourself.

>>35168086
Hey, you're alright

>>35168086
yes, but i would still like to be taught so i don't have to learn by trial and error

File: 1505243536812m.jpg (67KB, 1024x576px) Image search: [Google]

67KB, 1024x576px

>>35168089
Wow that cuts deep anon, please stop.

>>35168091
>>>/pol/

File: ThisTriggersWGWS.png (1002KB, 942x417px) Image search: [Google]

1002KB, 942x417px

>>35168116
No

>>35168116
>/pol/
Beat me to it. thanks

File: 1505015885001.jpg (77KB, 640x640px) Image search: [Google]

77KB, 640x640px

>>35168113
Pick up a book my man, then be ready for trial and error as you figure your setup out.

File: Pianoman.jpg (99KB, 674x654px) Image search: [Google]

99KB, 674x654px

>>35167726
rip wealthy harpsichord

>>35168137
i can't read

BCM MMR or Guyslee MK8 which should I get?

>>35168148
Audiobook?

>>35167942
they're almost 3oz lighter than the steel set and work well enough, perfect for a backpack gun
but thats about it

>>35168153
Mega wedgelock

>>35168154
lost my hearing in the war

>>35168153
noose

File: vis3upper.jpg (1MB, 3024x4032px) Image search: [Google]

1MB, 3024x4032px

>>35168021
I know something about that. I saw a T2 plus mount the other day on EE for like 375 that I had to turn off my phone over. Save up, get something nice. I wish I would have. your setup has lots of potential.

>>35168004
The only other one I'm aware of is Cloud Defensive. Never used those before though. Maybe check TNVC? They have an absurdly large selection for illumination.

(pic unrelated)

File: PmgssSZ.jpg (2MB, 3648x2736px) Image search: [Google]

2MB, 3648x2736px

>>35168164
but I want rails on the upper 45° quadrants.
>>35168166
no u

>>35168166
Be nice

>>35168086
Uncle Mek my car won't start.

File: 1503344397307.jpg (53KB, 869x435px) Image search: [Google]

53KB, 869x435px

>>35168205
That's a predicament.

>>35168205
He's too drunk to fix it.

>cap caca cherokee

File: 1505279976353.jpg (58KB, 722x349px) Image search: [Google]

58KB, 722x349px

>>35168260
Lies, there's never such a thing.

Now, being too hungover on the other hand...

File: MI-G3ML9-2.jpg (238KB, 1200x419px) Image search: [Google]

238KB, 1200x419px

why is this only 7.3oz including the barrel but

guys

GUYS

what's this scuttlebutt I hear about Eotechs being fixed? Can I get that sweet holo reticle and not worry about my optuc shitting the bed? I don't need constant on or 5 gorillion years battery life.

>>35168358
The reticle isnt any faster, the sight is still more delicate. Just get a comp m5

>>35168372
>Just get a comp m5
That is tempting, is there a street date yet?

>>35168358
Just get a meprolight

>>35168383
Lmao I've seen enough from you to ignore your suggestions

File: 20170725_152914.jpg (2MB, 2221x1352px) Image search: [Google]

2MB, 2221x1352px

>>35168153
MK8 for sure.

>>35168353
Because it doesn't have a genuine anti-rotation mechanism.

>>35164071
[email protected]
>>35164783
The fins man, that run along the length of the rail.
Thanks for email plug by the way.


Someone buy AR pls. $900 with 8 USGI mags with upgraded Magpul followers and the red dot.

My can arrived and I want to get the pistol build/host going for it.

>>35168381
Just get a cheap m4 when the m5 comes out.

>>35168410
fine buy a shit eotech

>>35168381
Not for a few months at least. The government is first in line because they have more money than you, even though it's your money they're spending.

>>35168428
Stolen valor m4 is already cheap

>>35168459
Bitter?

>>35168153
Get the MMR so all the trips will want it but can't buy it without stumbling all over themselves trying to explain why they did.

>>35168472
Not as much as I would be if I didn't get most of my money out of the country before the election.

>>35168467
I suppose

>>35168505
Your money isnt safe overseas unless its in physical and in a vault in Switzerland, maybe Taiwan

File: ab1qzkLg3_840w_v1.jpg (91KB, 840x840px) Image search: [Google]

91KB, 840x840px

>>35168250
BOOMER GENOCIDE WHEN

>>35168545
When gen why moves out of mom and dads house

File: images (1).jpg (6KB, 378x133px) Image search: [Google]

6KB, 378x133px

Shitty pic I know, but what length is this setup? 11.5?

File: 1490913263295.jpg (52KB, 469x500px) Image search: [Google]

52KB, 469x500px

>>35167873
YES PLZ FFS.

Fuck rail mounted buis

>>35168538
Have you seen the scalaworks mount for the M4? It's actually pretty hot

>>35168381
http://www.opticsplanet.com/aimpoint-compm5-2moa-red-dot-sight.html?_iv_code=AI-RD-COMPM5-200320

>>35168628
That's pretty wild but it looked a little weird at first but it grew on me.

>>35168545
After we kill the commies and the UAW.

>>35168645
>basically same weight as the m4
>smaller lens
>800
Haha

>>35168628

>The low profile version

Oof, hot. Makes me want a CompM4 for my AK.

>>35168660
I wanna grab one, I'm halfway dedicating to this URX pistol build if someone doesn't pay like 1200 for my mk12 upper so I'll need an optic mount anyways

>>35168679
That would be pretty interesting. do it.

>>35166184
Larue has a well documented problem of damaging the rail

>>35168679
No one wants your upper

>>35168730
I'm looking at grabbing a Brownells A1 lower later this week so it'll start then. Probably won't be done for a while tho, just a piece here and there

>>35168764
All the messages I get about it says otherwise
The only reason it isn't sold is cause it's merchant tier pricing

>>35168788
Hence no one wants it, like wgws's shitbox AT.

>>35168814
>constant messages about people wanting it, but it's too expensive
>"THAT'S EXACTLY THE SAME AS WGWS'S UPPER"
Top kekkle
If I had a dollar for every offer I got on my upper I could buy a URXII right now

File: 20170725_153106.jpg (2MB, 2258x1270px) Image search: [Google]

2MB, 2258x1270px

>>35168814
>Shitbox AT
wdhmbt literally.

>>35166270
OK, that's pretty funny.

Does pb still post here? What about that lizard boy? Milsurpdude? It's been a year since I've lurked /arg/.

>>35168855
No yes yes

>>35168855
Pb was raped and killed by COfags. Or they shot him in one of their "drills." We're not sure.

>>35168866
What happened to pb?

>>35167234
Now we're fuggin talgin

>>35168855
RIP CG

PB here, but a lot less.
gecko here, but less.
MSD here, but less.

>>35168866

Thanks. Who's the new black sheep of /arg/? The weird one with that defends his poorly built AR?

>>35168904
That would be Ash, yes. Ps put your trip back on, Ash.

File: 3withPB.jpg (1MB, 1800x1488px) Image search: [Google]

1MB, 1800x1488px

>>35168832
It is exactly the same as the smoke grenades though. Literally more than 40 interested emails.

>>35168855
Gecko is still around as is MSD. pb is taking a break because of new job. We've got a fat club footed retard fuck named Ash who can't be bothered to take a picture outdoors, a POG named COG with a 50 shades of FDE mismatch who also can't seem to take a decent picture, and a gook manlet homo named orange cat or:
!!ea5XeZ81Rpo
with penchant for posting gay furry porn, that he construes as straight and on topic.

>>35168880
RIP CG

>>35168904
Fucking Ash

>>35167825
From 2019 when short sight radius is hi spd/lo drg. If it works, it works. Enjoy!

>>35168924
That's a more apt comparison
It's easier to get retarded larpers to part with 130 than it is 1200 tho

I'll just keep the diemaco for shitposting I guess, I can always sell it on its own for quick money

>>35168875
Killed by wgws is a training drill gone wrong.

>>35168952
Nobody wants your Diemaco trash either

>>35168924
Where's pb working now? I remember him talking about trying to become a LEO. Or did he take a new job at the water treatment plant?

File: WGWS1.jpg (1MB, 2032x1699px) Image search: [Google]

1MB, 2032x1699px

>>35168952
>Retarded larpers
>Autistic clonefags
We're in the same boat buddy. Except I'm (((6' tall)))