QTDDTOT Thread

>>34282666
Steel pot-
http://www.ebay.com/bhp/steel-pot-helmet
50-75 bucks.

and bayonet-
http://www.ebay.com/sch/sis.html?_nkw=WWII+M1+Garand+Bayonet+10+in+PAL+Military
300$ because everyone wants one.
How many magazines is enough /k/?

File: 20170617_083619.jpg (2MB, 2094x2347px) Image search: [Google]

2MB, 2094x2347px

Can anyone tell my why I keep getting this rash on my leg? I work a construction job and my vans werent cutting it so I pulled out some old combat boots I had that id never worn much. Its on the inside of both of my legs where the zipper for the boot is. I wear long socks too and those helped but it still happens.

Anyone got any good recommendations for good kevlar vest with rifle plates in the $250-$300 range?

File: 2844F4C9-CC04-499C-8605-34B8E933DDFA-1066-0000016C39A1D9B7_tmp.jpg (65KB, 1024x451px) Image search: [Google]

65KB, 1024x451px

How would a submarine crew seal a breach if they were unable to surface? Assuming that it is a minor breach at a moderate depth.

i want to upgrade the iron sights on my 10/22 what should i get

>>34282691
Truthfully, you can never have enough.

But depending on your budget, 50-100 is a reasonable amount for a single person.

Keeping them loaded is up to you, but personally I would.

>>34282691
3 is enough

File: born_to_meme.jpg (20KB, 344x344px) Image search: [Google]

20KB, 344x344px

I'm about to buy a mav88 and will be my first gun how often should I clean it and what products do I use

>>34284634
Either Nodak Spud or Tech Sights.

>>34282894
What brand of boots? Poorfag walmart boots?

>>34282894
try really washing the boots, if it's not an allergic reaction to something soaked into the boots its probably from abrasion.

>>34284809
should i get the tsr100 or tsr200 tech sights?

>>34282894
sounds like the guy who had the boots before u had tench foot and now u got it from the boots

>>34285311
Kind of a preference thing, I personally prefer the tsr100 with the flip apertures because they are really similar to the Magpul MBUS pro I have on my AR.

My LGS has a Remington model 8 in pretty good condition for $550. Should I take it?

>>34282894
Wear thicker socks and hydrate as you break the boots in.

File: 81WPJrIpk3L._SL1500_.jpg (136KB, 577x1500px) Image search: [Google]

136KB, 577x1500px

>>34284746
clean it after you shoot it, these are under $10 at walmart or on amazon.

What's the average price of a cz-52?

File: 00.jpg (23KB, 750x1132px) Image search: [Google]

23KB, 750x1132px

What Deagle model does this most closely resemble?

inb4 "drawn", I mean IMI, IWI, IXI, etc.

File: 51428kZUaHL.jpg (41KB, 332x500px) Image search: [Google]

41KB, 332x500px

Plastic paddy here,
what are some guns made in Ireland or by the Irish?

>>34286715
i see them for a little under $300

>>34286757
they were generally not allowed to make guns, a few contract enfields and webleys.
https://www.boards.ie/b/thread/2055416573

File: omega.jpg (135KB, 1000x540px) Image search: [Google]

135KB, 1000x540px

How much more comfortable is a stock than a brace for pistol caliber weapons?
Is it worth bothering with the ATF to SBR a pistol caliber "pistol" or cut down a carbine as opposed to just using a brace or leaving the carbine setup as is?

Is there a collapsing brace available for MP5s?

What's a good folding knife under $150

>>34286785
>Kavanagh Shotgun
This'll do, thank you.

What is /k/'s opinion on the .300 weathrby magnum?

File: hunter_pistol.jpg (21KB, 408x409px) Image search: [Google]

21KB, 408x409px

What muzzle loader does the Hunter's Pistol most closely resemble?
inb4 just plain old "Blunderbuss"

>>34286866
Blunderbuss

File: 1476051600472.jpg (66KB, 500x500px) Image search: [Google]

66KB, 500x500px

>>34286871
... what's the best weapon to subdue an armed person, so you can rape him in the ass?

>>34286885
Stick

File: 96545d.jpg (25KB, 800x240px) Image search: [Google]

25KB, 800x240px

>>34286866
ottoman blunderbuss

>>34286982
More like it! Thanks a ton, anon!

File: IMG_0602.jpg (66KB, 573x175px) Image search: [Google]

66KB, 573x175px

How good/bad is the Sig 556?

>>34282666
How many loads of cum would it take to fill an average car tire, and how long would it take?

File: bond_backup_bb.png (317KB, 570x359px) Image search: [Google]

317KB, 570x359px

i'm looking to pick up one of these bond guns, but the one i want comes with a black powder coat. do any of you guys know how powder coats wears over time? if it just fades i'm okay with it, but will it actually crack and flake off?

>>34282666
Have all Webley revolvers (including repros in .442) fallen under the scope of Antiques yet? I can't find .442 Webley anywhere and thought I'd ask.

>>34286885
Taser or tranquilizer dart shooter if you dont want to hurt him
Literally any weapon if youre experienced in body disposal and into necrophilia

>>34287418

Significantly worse than an AR.

So, basically it's ok. Because ARs are pretty great, being worse than an AR isn't the worst thing in the world. Lots of guns are. But you can get better for cheaper, so you're a sucker if you buy it. Just like say, a mini-14.

File: B-BUT IT COULD WORK.jpg (23KB, 480x480px) Image search: [Google]

23KB, 480x480px

Looking for a good M16a1 upper thats not Brownells

>>34284746
>my nigga
I always clean after shooting it, if youre too poor to buy >>34286292 then a weighted towel on a string with some bulk CLR should unfuck it enough.
Never expect it to look like new after the first 10 rounds though.

>>34288022
anyone have experience with crinkle powder coat on a fire arm? does it crack or just fade?

what's a good reloading setup for a newb I don't know anything about reloading but I want to learn

/k/ and gun owners in general tend to be super autistic when it comes to small details and more often than not, safety. So why is it that every time someone posts a picture or gif or webm of their gun the fucking selector is set to semi and the only person this seems to bother is me? Keep your weapon on safe until you intend to fire!

>>34288307

If I've cleared the firearm and am literally just setting it down for a picture, it doesn't fucking matter.

>>34288359
Maybe it's just some stupid muhreen brainwashing I need to offload but for me flipping the selector to safe is like flushing a toilet. I don't even think about it, it just happens.

File: IMG_20170617_091958.jpg (4MB, 4419x2536px) Image search: [Google]

4MB, 4419x2536px

I bagged these suckers earlier today with a .177 crossman classic 2100.

Does anybody have tips or care to share a story about staking out and defeating the chipmunk menace?

>>34288484
Also, can anyone tell me if the bottom one was pregnant?

>>34288501
Why not just slice it open?

>>34288533
Because I threw those assholes deep in the woods in my backyard. Not worth getting all bloody slicing them apart to find out.

I tried googling pictures and I think I'm right. Just wanted to see if someone here had knowledge/experience in identifying this sort of thing. Either way, a dead chipmunk is a good chipmunk. Wanted to know if I prevented more from popping up with this one kill.

So I'm meeting this guy to buy a gun off him at the police station tomorrow, should I call ahead of time tomorrow, or should I just walk into the lobby and tell them whats going on so they dont shoot us?

>>34288696
Go in and let them know, it couldn't hurt. If they say it's not cool, don't argue and fuck off.

>>34286757
I don't know of any Irish made gun. A lot of contracted guns, illegal or legal. The IRA and loyalists were both illegally importing guns. You can sometimes find Ulster Volunteer Force Mausers, but I don't think you would want one of those haha.
>>34286785
Most, if not all, of those "Irish Contract" No4Mk2 were never delivered.

will any iron sights work on a rifle with an extended upper rail? or are the front sights designed to compensate for being attached to a barrel?

>>34288696
I thought people just met in the station parking lot to feel safe, why do you have to go inside?

>>34288433
That's because anyone who knows how to guns and has a 3-digit IQ knows not to rely on a mechanical safety.

>>34288484
aim well

>>34288433
with my AK, switching is habitual, but on any other platform, I have to think about it. and my pistol doesn't even have a safety.

File: safety.jpg (18KB, 849x357px) Image search: [Google]

18KB, 849x357px

>>34288042
taser sure, but tranq is very hard to dose right, it's why it's only used on animals where it isn't a tragedy if they die or get away.

>>34288066
http://shop.ar15sport.ihoststores.com/category_v3.aspx?categoryID=94
http://www.gunbroker.com/All/BI.aspx?Keywords=m16a1+upper
https://www.tntesales.com/603-m-16a1-ar-15a1-upper-1-12/

>>34288228
i know crinkle paint on lighters holds up really well. no obvious fading, it will flake off if the metal rusts underneath but it provides a good protective coating.

>>34288307

>>34287940
The average volume of a car tire is 10 liters.
The average amount ejaculated is 3-5 ml.
With a load of 5 ml each ejaculate, it would require 2000 loads of cum.
The average refractory period of an 18 year old is 15 minutes, so if you did nothing but nut constantly whenever you could, it would take approximately 20.8 days to fill a tire with semen.

>>34288957

thank

File: 1465548787199.jpg (62KB, 800x890px) Image search: [Google]

62KB, 800x890px

I just got my bayonet fitted for my m91/30 but it looks like it's angled to the right, are they supposed to be off center?

>>34288957
>/k/- Weapons

I'm moving from NJ to a state with really lax gun laws. Have quite a bit of money. Is it worth buying an SVD/TIGR? I'm thinking about budgeting about 6k.

I love milsurp and inaccurate rifles, and I already have an FAL. Is there anything else I should consider?

>>34289031
>inaccurate
get a "springfield m14"

>>34288023
not just yet, but probably the majority of them

>>34288696
>>34288709
agreed. Do the deal in the parking lot, but let them know what's up

>>34289018
they dont call it a garbage rod for nothin

>>34289068
They do?

If I want to make my own firearm, what works for furniture? I have a bunch of 2x4s lying around but I have no clue how that wood holds up to recoil / general use. I'd love to do something like walnut but that'd take me a billion years to carve because of how dense it is.

>>34289018
>fitted

wtf did you do

File: 66f623465f637c36a4d8fca7d0827cd7cec623c3023698b635acb973e6b7d06b.jpg (60KB, 900x900px) Image search: [Google]

60KB, 900x900px

>>34289103
Spergs do. "Muh garbage rod" was started by the retards that kept chopping them up and are just now complaining they aren't $50 anymore. Anyone that calls them a garbage rod is an idiot. Pic very much related.

>>34289112
That density is partly what makes walnut and other hard woods good for stocks. A 2x4 is unseasoned pine. It's trash.

>>34289117
Well after some quality time in the basement with a hammer, vice, wrench, and something like a metal taper I picked up at a consignment shop I was able to mate the two, funny how the russians didn't get around to interchangable parts.
>>34289136
I see, do you know if it's supposed to be off center? It could be a trick of the eye due to the tapper now that I look at it again.

>>34289136
garbage rod is also my nickname for my penis

>>34289156
I'm so glad you bent the metal instead of filing it down. In the future you can use a hammer and an old drill bit and widen the socket enough to fit on in like 10 seconds

>>34289018
>>34289156
yes

File: 1426740862283.jpg (24KB, 469x351px) Image search: [Google]

24KB, 469x351px

>>34289168
Holy shit, I could have just used an old drill bit...

>>34289172
Thank you. mine autism has been satiated, also I'm glad I don't have to try to remove it, because I don't think I can.

>>34289189
I've been thinking of making a shitty WECSOG infograph for it for a few years. It's so fucking simple

>>34289156
>funny how the russians didn't get around to interchangable parts.
Or lazy importers/gun shops take the 3 fucking seconds to match the bayonets with the rifles.

>>34289199
The thought never even occurred to me.

>>34289202
It doesn't help mine is a tula, who decided it would be a good idea to recycle the numbers every year.

File: cop.jpg (71KB, 1500x821px) Image search: [Google]

71KB, 1500x821px

Would a Colt Official Police with a 5" barrel make for a good shooter for $400? I've always wanted an older cop revolver, as well as a Colt, but I've also heard that Colts are a gamble to shoot regularly because they're hard to fix if something goes bad.
If that's the case, would an older Smith & Wesson M&P .38 be a good or better pick for about the same price?

Novice here looking to buy first gun, what should I go for? Budget in all in roughly 3k

>>34289910
I'd buy the Colt and risk putting a few boxes through it just for fun, but for something you want to take out regularly the M&P or a trade-in Model 10 (if any are even still around) would probably be better.

>>34286116
Depends on chambering, if you can get ammo easily yes.
If you can't only get it if you're into reloading and making your own brass.

>>34286722
Impossible to tell, identifiable details too poorly drawn, most likely not IXI. 100% not modern production.

>>34289975
Well do you want a handgun or a rifle?

A ruger 10/22 is a great starting gun to have, cheap to feed and easy to use.

It really depends on alot of things, do you own land to shoot on? What will the gun be used for? Are you over 21/ can you buy handguns?

>>34290037
I imagined it'd be something in-between. I wouldn't be running hundreds of rounds through it monthly, but I definitely intend to take it for a whirl semi-regularly.
In the long run, I'd probably run more than a few boxes through it though.

Are binoculars for loadouts something /k/ ever mentions? I've been wanting to get a pair but am largely unsure of what to look for.

>>34290087
No, not really. Probably a better question to ask in precision rifle threads or
>>>/out/

I'm going on a holiday to the US and I will be in Denver for 4 days, I want to learn to operate a firearm. How to I go about this?

I was thinking about emailing a store or gun club to see if they know anyone that wants to make a couple of hundred dollars. But that may seem a bit terroristic.

>>34290462
Some gun ranges will rent firearms for cheap.
Look for ranges in the area and call and ask them about rentals, ammo, etc.

>>34290462
google "rental range denver co" start with the closest one to where you're staying.

>>34288833
If it's any help, I like pre-modern weaponry, akin to >>34286815
I saw some only percussion Irish target rifle on RIA a while ago for example, don't remember the name.

>but I don't think you would want one of those
Very astute lol

File: 05.jpg (70KB, 750x1099px) Image search: [Google]

70KB, 750x1099px

>>34290061
Is this angle better?

I heard that the Springfield 1903 is actually less accurate than popularly regarded, at least in comparison to other rifles at the time. Anybody know if this is true?

Also does anyone have an image to show what looking through a Hensoldt ZF 6×42 PSG1 scope looks like?
Also Ian's video was a bit long, is my raifu as reliable and great as I always imagined?

>>34290462
>>34290547

Actually, are you asking because you're a complete and total novice and are looking for someone to help walk you through proper handling of firearms? Handling a gun for the first time can be pretty daunting, sure, but if you can't find anybody to hold your hand, you're going to have to man up and just go for it.

Like I said, look for ranges and call and ask about rentals. Have an idea of what you want to shoot. Find out what guns they have available.
After that, look into the specific gun(s) you want to shoot. Don't settle on one in case they are already renting it out or they don't have it anymore for whatever reason.
When you go to shoot, start off by loading one round at a time and work your way up as you get more comfortable.

As a complete novice, I'd say 50-100 rounds (pistol) and about an hour and a half to two hours at the range sound about right.

>>34290567
Still hard to tell, its an IMI Mk1 or Mk7.

>>34290594
IMI Mk1 or Mk7 is good enough for me, thanks so much!

File: IMI_Magnum_Desert_eagle_black.jpg (139KB, 750x867px) Image search: [Google]

139KB, 750x867px

>>34290596
If you find any other pics the main difference is the short slide stop and safety on the mk1(Top).
The difference between mk7(bottom) and XIX is most modern production XIX have fluted barrels on the sub 50. AE and most have either 2 cut or full pic scope mount.
Early model XIX are externally the same as Mk7's

>>34290591
Yes, I am a complete novice. After some looking I found a lady that owns a range and offers private classes, I think I will get her to instruct me for one lesson and then try it on my own.

>>34290667
That sounds pretty viable. I wish you the best of luck.

File: ae3f11e8255b454914e44facfe4e673a.jpg (417KB, 1387x1500px) Image search: [Google]

417KB, 1387x1500px

What's a good hunting rifle that would fit well with an ALICE rig? Mine is like pic related but replace the Canteens with one 2 quart Collapsible Canteen. Then again replace one of the Ammo Pouches with a Condor Multi purpose Map Pouch.

I also rigged a MOLLE 2 Radio Pouch with some para cord attached to the rig 1930s Haversack style so I don't have to take it off to reach food and clothing. This is helpful when still hunting and literally everywhere is your campsite.

But now i need a gun. I have a 1944 Spanish air force Mauser that my dad bought still full of cosmoline. Its an absolute joy but i want to keep it pristine so i can pass it to my off spring.

Texas WMAs range from close bush in the North East and a variety of long open space and woods every where else. Will a Savage Axis in .270 do for both situations?

File: 30JulyRange022.jpg (150KB, 800x600px) Image search: [Google]

150KB, 800x600px

Will the Marine Corps adopt Multicam, or a rip off version of it like the army did?

Why is the AR7 in gimmick tier on the sticky list? I just want a rabbit killer I can use beyond handgun range that still fits in my underwear.

>>34291702
Shitty sights, no sling hooks, barrel doesn't come threaded.
Get a 10/22 takedown or get treatment for your Parkinson's because .22 can't reach out beyond effective pistol ranges anyways and you're just a shitty shot.

File: 1491753392612.png (328KB, 686x1200px) Image search: [Google]

328KB, 686x1200px

>>34288957
but you'd die before 2000 continuous ejaculations

>>34290567
Fuck off with your gay mango

>>34282666
Best way to remove rust from surplus mags and what to do after (refinish, paint, etc)?

Talk to me about those tnw aero survival rifles in 9mm please. Ive watched a few videos on them but im still kinda on the fence about them. My wife wants one, and we already have ARs and AKs.

Also spoonfeed me about Atlantic firearms, ptr 91s. Ive watched a few videos and im pretty into them, but im on the fence still. Yes, I have an ar10, but we're both in the market for something different.

Anyone here have experience with joining the Foreign Legion? Or know anyone who has? Specifically, how important is military experience to them. I'm considering joining up, but I've got zero combat background. They don't state it as a requirement on their website, but I don't think they would disregard it that easily.

why did dollanon's thread get deleted?

File: knurled handguard.jpg (62KB, 1500x477px) Image search: [Google]

62KB, 1500x477px

Can anyone identify this handguard? I know it's not much to go on but it's the best I can do

How do i get a girlfriend?

>>34293108
https://www.midwayusa.com/product/1151122407/hogue-free-float-tube-handguard-ar-15-knurled-aluminum-black

>>34293126
Thanks sweetie

File: cod4a.jpg (277KB, 1200x969px) Image search: [Google]

277KB, 1200x969px

I bought a .177 pellet gun the other day.

What care and cleaning considerations does it have? Should I be taking apart the piston to grease it up regularly, or is that a spring cleaning kinda thing? What kind of stuff should I use to clean the bore, would normal pipe cleaners be sufficient?

Also, is .177 at 400fps sufficient for literally anything other than knocking cans off fences? I don't eat a lot of meat as it is, but if I felt like hunting, could I go nail rabbits or birds with it or is it kinda like hunting deer with a .22?

Is the dovetail mount present on airguns likely to be the same as picatinny rails on full fledged firearms? Could I take the scope off of this thing and put it on a real gun? If I see accessories for real rifles or airsoft guns, could I take them and put them on this BB gun?

I'm a new shooter, I'm in the naval reserve of the canuckistan so I've shot before, but their instruction isn't great and I'm not very good. I just can't get my head around using a scope, or why I'd even want to if it's not ridiculously powerful. I have no idea how to zero it either. What are the basics to know about rifle scope usage and maintenance?

>>34284480
Same way surface ships do; wooden plugs and "splinter boxes". splinter boxes are basically a bucket with a bolt and toggle threaded through it, kinda like sinker screws you get for hanging stuff in your house. except instead of hanging a shelf it hangs a bucket. The bucket goes around the hole. You tighten it on with a giant wingnut.

The alternative, because splinter boxes are big and bulky and space is always at a premium on any ship, are wooden plugs and rags. You put some rags on the plug to make it fit just right, then smash the plug in with a mallet. If there's gonna be issues with pressure, you build wooden shoring to keep it in place. Metal shoring widgets also exist, but like the splinter boxes, they're bigger and less versatile than just carrying shitloads of 4x4 and a saw.

>>34293112
get a bf

>>34293192
>Should I be taking apart the piston to grease it up regularly, or is that a spring cleaning kinda thing?
Once and a while

>What kind of stuff should I use to clean the bore, would normal pipe cleaners be sufficient?
Lead solvent, pipe cleaners may be enough but a .15 rod and .17 brush are cheap.

>Also, is .177 at 400fps sufficient for literally anything other than knocking cans off fences?
Its on the low end for rabbits, anything smaller is fine.

>Is the dovetail mount present on airguns likely to be the same as picatinny rails on full fledged firearms?
No its most likely a 3/8" (aka 11mm) dovetail. You can get adapters to fit.

>Could I take the scope off of this thing and put it on a real gun?
Bad idea, likely will break on anything but 22lr

>If I see accessories for real rifles or airsoft guns, could I take them and put them on this BB gun?
No for scopes, yes for anything else.
Air rifles have a strange recoil impulse which most companies don't design scopes to resist, best off just getting air rifle marked scopes.

>>34293291
Ok, so basically, the dovetail is wrong, but adapters exist, but scopes are not cross-compatible in any way.

Beyond maybe some aftermarket irons, is there any must-have meme accessory I should be on the lookout for to make this thing more effective or more fun?

>>34292458
Only thing I've heard is they will pair you with someone who knows French to help you learn it, but you better learn it real fast, because their drill instructors will fuck your shit up just for messing up a word.

>>34293372
oh also two last questions

I plan to utterly ruin it with stickers and tassels and colored tape and junk like a goddamn hadji, is dark green/pink a color scheme associated with ponies because i dont want to be mistaken for a pone lover, i dont mind being called a faggot but im not no donut eater gnome sayin

and what's a convenient way to carry pellets, I don't wanna have an easily knocked over or misplaced tin or carton with me even if I'm just blasting cans

>>34293112
are you someone worth dating? improve yourself first, then start the long and lonely search.

>>34282666
Just got my first mosin, covered in cosmoline. I know mineral spirits and everything but how do I make sure cosmoline doesnt leech out of the stock and gum up the bolt

File: obrez-big2.jpg (39KB, 810x491px) Image search: [Google]

39KB, 810x491px

I wanna get a .22 or .177 airshit to bring about the squirrel apocalypse and protect my birdfeeder. Any recommendations? I don't mind spending money on something nice and on CO2 cartridges but I don't really wanna go through the trouble of getting a real fun just for this.
[spoiler]mfw looking at some airshit and find a obrez'd nugget[/spoiler]

>>34293901
CO2 is generally shittier than PCP or spring piston airguns afaik. PCP will be more powerful than spring piston.

As for specific models, I dunno. But most will have their muzzle velocity listed. Airshit won't be sufficient, you need a proper BB or pellet gun. Airsoft is 6mm plastic balls, BBs are generally steel or copper and pellets are lead. Airshit can't load BBs or vice versa.

>>34293929
Alright, thanks. Looks like I know even less that I thought about this kind of thing. I had pellet guns in mind when i said airshit. I'm probably gonna get some spring-piston gun. My parents also have an awful woodpecker doing a bunch of property damage to their siding every year that I can deal with finally.

does powder coat flake off on guns or just fade?

>>34282922
I've got one for sale if you'd be interested. Email me at sharpiepainter (at) gmail.

>>34292113
Depends on what they're made of, for steel just google it, for aluminum it's a waste of money

>>34292320
PTR91s are a good time, just get one for the novelty if you like it.

File: 77f2bd0cabe91798dee5e40d85e133593d796bdc89ffb3ea4fe0a2f258073930.jpg (92KB, 1024x440px) Image search: [Google]

92KB, 1024x440px

Brit here. Never touched a gun in my life but want to start:

>Need character references for a gun license
No real life friends and my family (like most normie Britbongers) find gun possession unthinkable so they'd never give me a reference, plus it may even scare them
>Need background check
Not sure how far this goes. I'm worried this means being put a watchlist and gives them permission to search through my PC and online activity, or ask questions at my workplace.

For the record I don't possess anything illegal on my computer, but like the average /pol/ak I have controversial political views. As for my workplace it would make thing difficult because of all the assumptions the average Britbonger will have about me once they found out I applied for a gun license.

What should I do, and are my fears justified?

Also inb4 "get a truck"

In a recent InRangeTV video they said something to the effect of "the DMR of the past is the standard infantry rifle of the future", but then militaries seem interested more and more in compact guns like the M4. Are they right?

>>34294856
Wait for a revolution

Shot in the dark but does anyone have a screencap of the copypasta about a knight training years with a sword only to get shot by some illiterate serf with a gun?

File: Corbyn.jpg (66KB, 674x506px) Image search: [Google]

66KB, 674x506px

>>34294866

Sadly pic related is what Britbongers consider for revolution. A revolution like this would only restrict things further.

is there anything wrong with buying a gun safe from academy? i know they are just walmart brand safes but i'm more constrained by size and space currently and i don't exactly live in a bad part of town

for occasionally stomping around in the woods and doing some farm work are work boots the best option for me? looking at wolverine work boots

>>34295118
Mate I wouldn't be too worried, your economy is absolutely fucked and soon enough your people will be forced to face the reality that socialism and globalism are not sustainable.

For how much go vanilla, factory new Colt made M1911A1s/Govt MK4s in. 45? I've heard they go for around 500-700 USD. Can someone enlighten me?

File: AR10B-LULA-300x300.jpg (10KB, 300x300px) Image search: [Google]

10KB, 300x300px

Anyone know if this Maglula loader for M1/M14/AR10 will work for AICS magazines?

File: 10616922_932919986782755_846887074_n.jpg (113KB, 640x640px) Image search: [Google]

113KB, 640x640px

sauce/name on pic related?

File: THICC.jpg (68KB, 736x1214px) Image search: [Google]

68KB, 736x1214px

Guys, I fucked up, I put my Mosin bolt back together after cleaning, screwing the firing pin into the decocking piece to be exact, and the damn thing got stuck halfway through. I tried using the bolt connector to screw it out but it wouldn't work. I tried smacking it with a hammer and I fucked up the prongs on the connector, now he firing pin isn't flush with the cocking piece and, while I was able to put to bolt back together, it failed the protrusion test by like a millimeter.

So is my bold fucked guys? Anyone else had this happen to them? I'd hate to have to buy a whole new bolt assembly

>>34295791
nvm, found it, leaspeed6

File: 20170618_171244.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

So found a mosin nagant with a Soviet scope on it today at a pawn shop for $195 out the door. The thing had wear on the stock and the bluing but no rust. Had piece of wood chipped off of it just left of the bolt. Wast able to check the bore because of the lock it had on it.
With the half assed info and pictures I've provided does /k/ think its worth it? Always told my self i wouldnt buy a mosin for over $100 but the scope has me considering it.

File: 20170618_171257.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296059

File: 6568173_01_vz2008_640.jpg (39KB, 640x478px) Image search: [Google]

39KB, 640x478px

How much so you guys think this is worth?

>>34296089
Vz. 2008

File: 20170618_171302.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296059
All numbers seemed to match as far as i could tell but the trigger housing was a forced match amd couldnt make out the numbers on the stock

File: mp93.jpg (42KB, 650x489px) Image search: [Google]

42KB, 650x489px

I've read that tearing in traditional ballistics gel isn't representative of what really happens to a target and should be ignored, and is also why clear gel that doesn't tear is a better example. Is this true?

>>34293901
>>34294022
quick blog followup, prob gonna get the Crossman MTR77, the mallcop tacticool look isn't great, but the performance seems good and the FPS is rather high. Is there any reason I should look for a .22 over .177 for pest removal?

File: 20170618_171330.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296059

File: 20170618_171332.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296059
Not sure if these are the same scopes that were issued at the time, don't know much about these guns to be honest.

File: 20170618_171251.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296059

File: 20170618_171338.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34296076
And the last shitty pic i was able to snap before they closed shop

What is the condensed version of California private transfer laws?

Lets say im outta state resident, wanna buy something off a buddy and bring it back with me to other state.

>>34296089
Bayo $30-45
Mag $11
Mag pouch $25-45
Rifle i dont fuckin know sorry anon

>>34293901
>>34293901
Must admit i dont know shit about airshit but i know midwayusa sent out a email a few days ago saying there having some sell on refurbished models. $30-$70 savings from what i sawbalmost got one but wasnt sure if they were worth while models.

>>34293794
Leave the stock outside on a hot sunny day to "Bake" out the cosmo. You can put it in a black garbage bag if its not super hot in your area.

>>34295578
No those mags loaders generally only work for double feed types and i'm pretty sure AICS are single feed.

>>34296059
Worth

>>34296380
Wrapping some paper towels on the stock before you throw it in the black garbage bag helps with clean up.


And i take it "worth" means the rifle is worth the asking price? I dont even know what these things are going for now days

>>34296380
>No those mags loaders generally only work for double feed types and i'm pretty sure AICS are single feed.
Do you know of anything that does work for aics mags?

>>34296442
Without the scope i think they're up to 150, so even if its a repro its still a pretty good price.

File: $_1.jpg (19KB, 400x400px) Image search: [Google]

19KB, 400x400px

>>34296444
Nothing off the shelf but it would not be hard to make one if you had access to a 3d printer.
Essentially all you'd have to do is scale up one of the simple pistol loaders to fit the mag.

File: IMG_20170531_213538.jpg (1MB, 3649x3006px) Image search: [Google]

1MB, 3649x3006px

>>34286799
What are you using it for? If it is daily carry I'd say a Spyderco Paramilitary 2, if its harder use, ( probably just buy a fixed blade), go for the Military.

>>34296598
what kind of gun is that

File: 6568173_03_vz2008_640.jpg (46KB, 640x478px) Image search: [Google]

46KB, 640x478px

>>34296287
Thank you very much Anon.

>>34296752
Looks like an H&K SPF9, ral 8000 model.

>>34282666
thats a vietnam era pot nigga

>>34296059
>>34296076
>>34296103
>>34296141
>>34296210
>>34296222
>>34296234
A steal for $195, but it's a fake PU sniper that Century made.

>>34297743
Yeah not to worried about it being 100% authentic war era but i havent bought mil surp in years just want to make sure im not getting ripped off here and if i end up getting bored with it i can make my money back.

What's the worth of a Winchester M97? I see originals going from $300 to well over $1500 and have no idea what the huge difference in sales price is based on.

I was thinking of testing my clearing bucket on the 4th. Is this a stupid idea? I live in a city but next to a bunch of Mexicans who shoot into the air on the 4th so i wouldn't think it'd bring too much attention.

File: 20170618_171233.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

>>34296059
Forgot this pic shows most of the wood finish damage

>>34282666
What firearms have extreme weight differences unloaded vs loaded? American 180 for example is about 2x it's unloaded weight, about 5 pounds compared to 10.

>>34297962
You'll easily make your money back.

Both the scope alone and the rifle alone are worth at least as much as their asking price nowadays,

Will me as a new shooter using a red dot instead of iron sights hurt me going forward?

Bought it cause it was so cheap but my buddy has been giving me shit for it because its an easy button and i dont know how to shoot without it yet. (Can ring steel most of the time at 100 yards on irons. Only been out 4 or 5 times to shoot my ar-15)

>>34299053
What do you think? It'll hurt you going forward shooting with irons. ARs are accurate and most iron sights on them are very user-friendly. If you don't ever plan to shoot with irons though then you can keep doing what you're doing.

just bought the tsr200 tech sights for my 10/22. what else do i need to buy to install and zero them? can i do it without buying the tech sights tool?

>>34299342
Not easily, it seems you can also use an A1 pattern sight tool if you have one or ccan get one cheaper.

File: Stardust.gif (42KB, 341x192px) Image search: [Google]

42KB, 341x192px

Hey /k/, newfag here.

I'm interested in firearms and would like to know more about them, but I don't know where to start. Should I just read a lot on sites like Wikipedia and shit, grab a book on a topic of my interest or what?

Thanks in advance.

>>34299401
buy some guns

>>34299412
How would I now the right model for myself if I know little to nothing about them?

>>34299422
get a 10/22

>>34299401
Most firearm books that you will find tend to be more in depth research paper types rather than general overviews.

http://modernfirearms.net/index-e.html -Index of modern firearms
http://www.imfdb.org/wiki/Main_Page -Index of movie/tv/games firearms and their real world counterparts.
https://www.youtube.com/user/brownellsinc/playlists -Basic firearms maintence videos.

>>34299430
Will read those, have a good one.

>>34299090
Its not like i don't know how to use them and its not like i still cant use them to train with from time to time. I mostly just want to put rounds on paper and steel. Of course i want to get better but im never reaching anything more, and its not my home defense rig anyways...

Basically my arguments but he wont let up.

Whatever. Thanks for the input though, i appreciate it.

>>34299053
why dont u just co witness them and train with both at the same time

>>34299784
This is what i plan to do really...

Is 530 a good price for a Glock 19 Gen 4? What are some good IWB holsters for one? I'm not a small person so I think I'd be able to CC one. In winter time at the least.


>>34293112
I'm late to the thread but maybe this will help some of my more autistic /k/omrades. Work on getting generally physically fit and don't be weird. Its really that easy. Remember that girls are people just like you are and aren't any more special than you. That helps when you get nervous. Most girls are really worthless to talk to about anything of substance, so their main value will be sex and enjoying how they can make the days go easier. But its fun to have a girlfriend so long as you don't psych yourself too much, anon. A lot of stuff just comes from potentially painful experience, though in all honesty.

>>34282666
Why does /k/ have such a hate boner for ar500 plate armor? I just got done watching demolition ranch where they test out III+ and it held up pretty good.

>>34290674
m40

File: sb.jpg (31KB, 576x415px) Image search: [Google]

31KB, 576x415px

Greetings /k/, /tg/ game designer here - I'm writing a modern air combat game and researching Vietnam era aircraft.

Anyone know any good resources on radar ranges of Vietnam era aircraft? I can find some resources, but it would be nice to have something that covers 'nam era more in-depth as I have some holes.

For example the range of the radar on the A-6A and A-6B intruders. I can find the range for the radar on the A-6C - 277km, but it would be nice to find more specific data on the older variants.

Surely this stuff is well documented somewhere? There must be a datasheet of 'Nam era aircraft radars somewhere

Thanks

I am from a socialist police state with very small gun owning options for civilians but have been given special permissions because of credible threats against my life. I can choose between a small list and have narrowed the choices down to a Glock 19, a Beretta 92FS and a SIG Pro 2022. Capacity does not matter because I will only be allowed ten shot magazines, and the cost difference is small compared to the large fees I have to pay. I am mostly liking towards the Beretta 92FS because of the safety and towards the Glock 19 because it is small. I can not feel any of them in real life first which is bad because many people say the Beretta 92FS is large and I am a fairly small person at 171 centimeters (67,3 freedom inchers). Of course you all know better than me so what does /k/ recommend for me?

>>34299401
Lurk here for five years and acquire a wealth of knowledge to rival the most experienced shooting instructor and historian.

And then read a single book and realize every single thing you learned here was incorrect.

Are airguns a worthwhile way to play with shooting targets without falling afoul of nogunz laws, or is it so different to a "real" gun as to constitute an entirely different thing without much in the way of transferable skill?

>>34300468
Glock triggers are garbage and the 92 is the size of a small car, no manlet can handle it. Go for the Sig. It's the worst Sig but it's still better than the other two.

>>34300468
Glock 19. The others have DA/SA triggers which require training to use properly.
Also your ESL is showing.

>>34300594
This. Exhibit A: >>34300624

Hey /k/, french here. I really want to own a SKS, and was looking exactly how to get one. It doesn't seem to be too hard, but I have no idea which shooting range let you use it.
Is there any other french that have experience or ressources about shooting range, how to find a good one?
Thanks in advance

>>34300468
You're comparing three very different guns, one of which has a different kind of action than the other two. I personally am a big fan of DA/SA because I like carrying safety-off, hammer-down so I can just use the DA trigger-pull as my safety, but not everybody is like that. But my opinion doesn't matter. Try out all three at a range. Buy what you want based on what is most comfortable and which has the action and features you like the most. This applies to every "which gun should I buy out of x, y, and z?" scenario.

>>34300624
5'4" manlet here. I CC a 92FS every day at work and have done so for several years with no trouble or discomfort. A full-size pistol is a full-size pistol. You're full of shit.

>>34300624
The Beretta 92FS is only ~13% larger than the other two. I am more concern with grip size than any thing other.

>>34300694
>Glock 19. The others have DA/SA triggers which require training to use properly.
I am being made to take a 8 hour class 1 time for week for 4 weeks any way. Most of them after the first are spent shooting at a range.
>Also your ESL is showing.
I know. I do not work in international so I do not use english since school.

>>34300807
>You're comparing three very different guns, one of which has a different kind of action than the other two.
I am sorry. I do not really know the classes of gun after handgun, shotgun and rifle.
>I personally am a big fan of DA/SA because I like carrying safety-off, hammer-down so I can just use the DA trigger-pull as my safety, but not everybody is like that.
I think the Glock 19 is also like this with the only trigger safety. Is it not?
>Try out all three at a range. Buy what you want based on what is most comfortable and which has the action and features you like the most.
I can not. Gun malls are not a thing in my country and ranges are for government users only. I am being allowed to use a range only for my needed training.
>5'4" manlet here. I CC a 92FS every day at work and have done so for several years with no trouble or discomfort.
Can I ask you how big are your hands from the top of the wrist to the top of the middle finger?

>>34300921
A single-action hammer-fired pistol, such as the 1911 or Hi-Power, has a relatively light, short trigger pull and the firing pin is forced forward, into the round's primer by a spring-loaded hammer. The energy of the fired round pushes the slide back, which in turn recocks the hammer into a position to be fired again. A double-action/single-action pistol such as the 92 uses the same principle, but also has a double-action mode, meaning that if the hammer is down, or uncocked, the trigger can be puled, though with a much longer and heavier trigger pull, to cock the hammer and fire the round in one action. Most modern revolvers are DA, as the trigger-pull is used to cock the hammer, fire, and rotate the cylinder in a single movement. In a DA/SA automatic pistol however, after the DA trigger pull, the hammer will already be recocked due to the aforementioned movement of the slide, so even if you shoot in DA mode for the first shot, all subsequent shots will be in single-action, unless you decock the weapon. Some pistols have a decocker lever or combined decocker and safety.

A striker-fired pistol like the Glock on the other hand, rather than having a hammer, has an internal firing pin system similar to that of a bolt-action rifle. This is more mechanically efficient, but every shot is double-action. Some prefer that consistency, or like it as an added safety precaution. Glocks lack an external manual safety.

>Can I ask you how big are your hands from the top of the wrist to the top of the middle finger?
Around 7.5 inches, or 19 commiemeters for you. My hands aren't particularly big, especially for a man. You get used to whatever you shoot a lot, and I like how my big meaty Italian pistol reminds me of my big meaty American cock. Of course, if you don't have the luxury of being able to shoot and get used to all kinds of things, then a smaller gun will usually be more comfortable if you have smaller hands (such as mine) and vice versa for bigger hands.

>>34301198
Thank you for the explainations. I do not think I would like the Glock 19 then. I would rather like to just do bad on the first shot then have a easy trigger pull.
>Around 7.5 inches, or 19 commiemeters for you. My hands aren't particularly big, especially for a man.
We have almost the same hands then. Mine are 18 centimeters. Maybe I can handle the Beterra 92FS.
>You get used to whatever you shoot a lot, and I like how my big meaty Italian pistol reminds me of my big meaty American cock. Of course, if you don't have the luxury of being able to shoot and get used to all kinds of things, then a smaller gun will usually be more comfortable if you have smaller hands (such as mine) and vice versa for bigger hands.
Do you think I will be better off with the SIG Pro 2022 then with only almost 24 hour of total trainer time? I could maybe try and ask for more but I do not think they will let me. It is a military police range and they are very restricted about who can go on there.

Is a coyote going to fucking explode if I shoot it with 7mm rem mag? I know it's not ideal but I don't want it to limp around with a .22 in its ass either.

>>34301354
Wait, so you don't get to train on your own, even after the classes? If that's the case then you're probably better off with the smaller gun. I'm not familiar with the Sig Pro series but I believe it's similar to the 220/226, which is a highly-regarded product.

Still though, if you don't have a choice it doesn't really matter which you buy since you'll get used to whatever you shoot. Research the features of each gun and what they mean and choose whichever you think will fit your needs best. If malnourished Russian manlet conscripts can get used to rifles longer than they are tall you can get used to whatever you decide on.

>>34301486
>Wait, so you don't get to train on your own, even after the classes?
I do not think so. This does not usually happen so there is no internet guide or any thing. I will ask them to see although.
>I'm not familiar with the Sig Pro series but I believe it's similar to the 220/226, which is a highly-regarded product.
It is the 'poor man P226' with the nylon frame in stead of the anodised aluminium one.
>Research the features of each gun and what they mean and choose whichever you think will fit your needs best.
All right. Thank you very much for hælping me. Last question is do you think that having the safety on the Berretta 92FS will be good for when the gun is just at home for safety? (we do not have different words for the gun part safety and the general safe activity and I hope that it makes sense any way)

>>34300468
which country and why are people trying to kill you

I'm looking for a good scope for 10 or so inches of eye relief, with at least 2x magnification, preferably for 160 dollars or less.

Does /k/ have any suggestions? I'm currently considering this one, https://www.amazon.com/Nikon-ProStaff-Black-Riflescope-Nikoplex/dp/B004MYBKLS/ but I want to know if there are better options available for my budget.

Does /k/ have any suggestions?

File: 20170619_190900.jpg (3MB, 2105x2375px) Image search: [Google]

3MB, 2105x2375px

>>34301592
>which country
Danmark. Here are some monopoly monies for proof.
>and why are people trying to kill you
They probably will not. I saw them do nigger things and they say they will.

>>34301683
damn bro hope u get to shoot those niggers

Whats the best way to sell a waffen werks ak74, 20 mags and 6? spam cans of 7n6?

I want to get out of my 7n6 and get into 5.56 as i have since converted to an AR guy.

I dont expect to get much for my shitty AK but the spam cans have got to be worth like $220 each.

>>34300468
If you can only get 10 round mag can you get a Glock 26? Much smaller than the 19 and it only holds 10 rounds.

But really, it all comes down to personal preferences. Is there ways for you to hold each one and maybe shoot them?

>>34301561
A gun is an inanimate object and will not discharge on its own unless there is some defect or mechanical failure. There is no reason to have the safety engaged unless you're actively carrying it, and even then plenty of people prefer to carry with the safety off. If you leave the hammer uncocked it doesn't even matter if you leave it loaded with a round in the chamber. If you don't have a lot of time to practice flipping off the safety and/or racking the slide before firing I recommend leaving it with a round in the chamber and hammer down, and just using the DA trigger pull as your safety, as I do when I carry. In a dangerous situation you want to be deadly as quickly and reliably as possible. Your local laws might have something to say about leaving a round in the chamber though, I don't know. This applies to the Sig as well. The Glock has several passive internal safety mechanisms but as there is no manual safety you don't have to worry about this anyways.

>>34301683
Man I thought Denmark was in pretty good shape crime-wise compared to most of Europe. Didn't think the gun laws were that restrictive either. Stay safe.

>>34301809
No they are white they only do black things. Thank you.

>>34301889
No there are only 9x19mm and some 7,65x17mm handgun on the list. The only place that have guns here are hunting clubs which are break shotguns and rifles. I am not a part of any any ways (Google translater is bad "any any" can not be right).

>>34301899
>A gun is an inanimate object and will not discharge on its own unless there is some defect or mechanical failure. There is no reason to have the safety engaged unless you're actively carrying it, and even then plenty of people prefer to carry with the safety off. If you leave the hammer uncocked it doesn't even matter if you leave it loaded with a round in the chamber. If you don't have a lot of time to practice flipping off the safety and/or racking the slide before firing I recommend leaving it with a round in the chamber and hammer down, and just using the DA trigger pull as your safety, as I do when I carry. In a dangerous situation you want to be deadly as quickly and reliably as possible. Your local laws might have something to say about leaving a round in the chamber though, I don't know. This applies to the Sig as well. The Glock has several passive internal safety mechanisms but as there is no manual safety you don't have to worry about this anyways.
I do not think I will use the safety for carrying and I maybe now think I do not need any. I may still get the Beretta 92FS only because it looks better. Silly but it may probably be only for decorative anyways.
>Man I thought Denmark was in pretty good shape crime-wise compared to most of Europe.
10 year ago we are. Now there are Romanian gypsy vagrant and other like people. Still not bad like Germany which are just southern to us.
>Didn't think the gun laws were that restrictive either.
Gun laws are very bad. Our conservative party is like americas liberal in gun laws. Finland is the one who has nice gun laws.
>Stay safe.
Thank you.

Have remove words for limit so english is worse.

>>34302180
>regressing further into borkspeak instead of removing the fuckhuge quote
Try not to shoot your foot.

Whats a good optic to use with .308?

>>34299831
$530 new is basically the only price you'll see unless you start shopping blue label. Glock has a stupid rule that everyone that carries their pistols has to have them priced at their suggested price or they will stop dealing to them. All sales have to be aproved by glock.

Most used glocks show very little wear as long as they're not leo trade ins, dont bother buying new not worth it in my opinion.

>>34299958
Because they're heavy as fuck and everyone on /k/ thinks they're high speed low drag.

I'm buying some in the near future figure if i ever need it, it will be a quick ordeal where im just trying to get the fuck out as fast as possible and I'll just deal with the added weight if it has the potential to save me.

Is it safe to fire cartridges in a chamber that's just slightly too big for them? Like instead of a .226 inch wide .22lr chamber you used a .23 inch one.

stationed in germany, trying to ship home various firearm accessories back home to the states, such as a DPM ammo box and 3 magazines that came in it, wooden g3 furniture, and other such gear, what would be the best way of going about this? just shipping it home via military post office? filling out a form 6pt2 and doing it the legal upstart way, saying fuck it and selling the mags here so i dont have to deal with it? i dont know anything about importing and i just want to get my stuff home

>>34303137
Try shooting some 5.56 out of it and report back with results.

>>34290072
Rife/shotgun
10 acres of land(California)
Just something to start off shooting and getting the hang of a weapon. Also any suggestions on a gun safe would be appreciated.
& 19 so no handguns

File: 20170619_145451.jpg (2MB, 4128x3096px) Image search: [Google]

2MB, 4128x3096px

Are these brakes safe to shoot at?

File: Screenshot_20170619-150545.jpg (1MB, 1069x1421px) Image search: [Google]

1MB, 1069x1421px

Anyone know why a Marine would lace his boots like this?

What does a modern military look for when deciding on a service rifle/sidearm? I figure weight, accuracy, reliability are some obvious answers, but what are some not-so-obvious things they look for?

>>34304735
Retard proof-ness

>>34304028
So his boots can be cut off in the easier manner.

File: vJGhk4.gif (2MB, 320x180px) Image search: [Google]

2MB, 320x180px

>>34301484
Yes and no. Its organs are gonna be seriously fucked up, but if you hit a softer part, like the torso, then the mess will stay mostly inside the body.

>>34298287
Decided against the mosin even though i wanted to own some Soviet love. Bought a balck powder hawkin woodsman rifle for $50 instead. They retail for $439 so seemed like a good deal and I've been itching to get into black powder

How do you pronounce "sabot"?

>>34306316
Sabot (pronounced sah-bow)

File: 20170619_162909.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>34305105
Forgot pic

File: for the love of God help me.jpg (225KB, 600x300px) Image search: [Google]

225KB, 600x300px

#0 below zero USGI sleep systems.

Best way to clean them with out ruination. I really don't want to fuck up the insulation layers.
Any Ideas? Hand wash...dry clean?
>InB4 use google bitch
I don't trust the answers I'm getting
Thanks in advance.

>>34303933
I sure as hell wouldn't. First, they aren't flat. Second, you have no idea what the steel is. Use a real target senpai.

>>34302738
type of gun and what you're using it for?

>>34304735
cheapness and cool-looking-ness
mostly cheapness though

File: PTR pistol.jpg (36KB, 600x400px) Image search: [Google]

36KB, 600x400px

>>34306971
For home defense.

>>34306316
>>34306356
It's French. The last letter in most words are just decorations that aren't meant to be pronounced.

File: giuz pleez.jpg (13KB, 480x360px) Image search: [Google]

13KB, 480x360px

I'm begging here /k/omrades, I can't ruin these I overpaid as it is.
30 below zero USGI sleep systems.
Best way to clean 30 below zero USGI sleep systems with out ruination. I really don't want to fuck up the insulation layers.
Any Ideas? Hand wash...dry clean? Specific detergent? Can or even should I use permeation?
>InB4 use google bitch
I tried and have zero confidence in the answers


My ass is in the wing gentlemen, please help

File: giuz pleezee.jpg (23KB, 480x360px) Image search: [Google]

23KB, 480x360px

>>34307671
Meant to post image with water marks removed, sorry.

>>34306892
Wash them on cold low, and then low heat dry and complete the rest of the dry with an air dry hanging.

Since the bags are filled with synthetics, you can technically just shove them in a machine and wash/dry them, but over time it makes the bag less puffy/fluffy, so if you baby it, it stays puffy through multiple washes.

>>34306971
Bolt action rifle, precision shooting.
Scopes are a crutch, fuck all the haters.

File: 1494692989892.png (40KB, 626x626px) Image search: [Google]

40KB, 626x626px

>>34307747
Spoken just like an anon who never washed the real good -30 degree systems. There are three parts. Two can be easily hand washed and the third needs to be hand washed in a bath tub with dish soap then dried laying flat on a trap on a hot day. Had mine for years and they are like new.
>4chan, where you go honest for help and every answer is how to make cool crystals.
Nah, that fucks them up. Dry clean them bags anon.

File: pistol.png (2MB, 1013x889px) Image search: [Google]

2MB, 1013x889px

What's the make and model on this pistol?
Pic related.

>>34308855
Glock G0-T4K3 a better picture of the markings you fuck.

>>34309126
It's a cropped version of another pic.
Sorry.

>>34300162
bump for this. Any one know a good resource on Vietnam era aircraft radars?

In early modern time what exactly was the difference between heavy and light infantry and cavalry? Since armour was phased out what was different with them?

>>34296059
American dollars? Because if so, it's not 2010 anymore. You can't find Mosins for under $250 at most places.

>>34296089
Rifle's about $650

Bayonet can be anywhere from $25 to $50 depending on condition (every Vz.58 bayonet I've ever seen is worn to shit)

Mags are $25 each

Just be aware that the sights are very low in comparison to the stock, so if you have a tall head like me you're going to hate shooting this thing.

>>34307787
LEUPOLD
E
U
P
O
L
D

File: 1397453258730.gif (2MB, 350x300px) Image search: [Google]

2MB, 350x300px

Has anyone had any experience with the new drop-in barrels produced by IGB Austria? I was thinking of buying a 9mm luger barrel for my steyr hahn.
TFW I can only find reviews and forum posts from 10 years ago.

File: 1463277456388.jpg (300KB, 800x579px) Image search: [Google]

300KB, 800x579px

Just got a new shotgun. Shells getting stuck in chamber after firing. To get the shotgun to pump, basically requires two hands to rack it. This has happened with different types of ammo.

Any ideas what to do?

File: GGc1Iyt.gif (943KB, 500x658px) Image search: [Google]

943KB, 500x658px

>>34282666
Going to buy a gun off gunbroker, need to do a ffl transfer.
How to FFL transfer for dummies?

>>34311788
Take it apart, clean the fuck out of it and lube everything that moves

>>34311811
Find local place that sells guns and ask them if they do transfers and for how much. Once you get confirmation that they can and will, buy you gun off gunbroker, have the FFL you chose email or fax their info to the buyer. THe firearm will ship to your FFL holder where you will be able to pick it up for a transfer fee.

File: 1488217070591.jpg (11KB, 276x276px) Image search: [Google]

11KB, 276x276px

>>34305105
>decided against the 200 dollar faux PU with matching scope rifle
... Where is this at so I can go buy it anon.

>>34282894
Could be anything with old boots;disinfect the fuck out of them, but also
>where the zipper is
Do you have a metal allergy? Used to work with metal wires a lot, shit's real

File: 111111.jpg (98KB, 738x480px) Image search: [Google]

98KB, 738x480px

>>34288484
I've been having good luck with air infils with operators hand picked for stealthiness from my staff, pic related

File: q3423t2tre43534.jpg (238KB, 892x231px) Image search: [Google]

238KB, 892x231px

>>34294856
Quit your shitty job, and follow in the footsteps of many Brits before you by moving to America. May I suggest Montana?

File: 651649_ts.jpg (158KB, 1155x1155px) Image search: [Google]

158KB, 1155x1155px

What do u call these things
I use a homemade shemagh and its uncomfortable when turning my head around and it presses on my nose(i use it when i bike outside so i dont burn the back of my neck any more than it is)
will this remove those problems

>>34311788
What gun is that?

>>34282666

Just curious how long it might take my Varusteleka order to get from Finland to E. coast USA.

>>34312392
About 1 week, two at the very latest.

>>34312461

Thank you.

File: 1372027781486.jpg (246KB, 787x768px) Image search: [Google]

246KB, 787x768px

So I have a Yugo 24/47 Mauser which I want to possibly reload for. I've noticed bullets come in a diameter of .318 and .323. Which (if not both) should I be using? From my limited research, all military rifles are designed for .323, which should include Yugo Mausers like mine.

>>34312365
adler shotgun

File: justgavemyniggahead.jpg (29KB, 371x385px) Image search: [Google]

29KB, 371x385px

Guys i need a /k/ anome to watch, ik you faggots are weebs to

File: Tiger and Cleo.png (1MB, 1328x747px) Image search: [Google]

1MB, 1328x747px

Does anyone know how to change the gas block on an SVD?
FLANDRE I SUMMON THEE.

How does one go about a firearm transfer in person. Looking at buying something from someone on arms list and outside of contacting them, i don't know what im doing.

>>34312808
.323

>>34314343
Gunsmith Cats

>>34315389
>contact person
>arrange meeting at FFL or wherever
>meet at FFL, gun inside case
>tell them you're doing a transfer
>do transfer

>>34282666
Should i buy a Heritage rough rider with 2 cylinders or a American Tactical Imports GSG 1911 22LR Pistol?

I saw this on the BBC and thought you should see it:

Is Lockheed dumping F-16s on India? - http://www.bbc.co.uk/news/world-asia-india-40344566

Thoughts on this? F-16 still viable after 10 more years? Definitely an improvement over their Migs right?

File: IMG_1324.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>34308855
Its a tanfoglio gt27 in .25acp.

>>34312202
bump pls helperino

>>34312202
>>34317799
balaclava or neck gaiter

File: comphy.jpg (133KB, 880x660px) Image search: [Google]

133KB, 880x660px

>>34306892
>>34307747
>>34307957
Google offers no help about washing these things so can anyone who owns them and has washed them a ouple times respond please?

File: 1498020224039.jpg (966KB, 2896x2896px) Image search: [Google]

966KB, 2896x2896px

So I've noticed that some F-18's have rounded intakes, and others square intakes. Is there some sort of functionality difference between the two? Or is this just some out of the blue no reason design difference?

>>34318377
Both sets of intakes are square, it's just the angles the pic were taken.

File: e8d05956d08f7d365b6b9b5d4933e364.jpg (70KB, 915x588px) Image search: [Google]

70KB, 915x588px

Greetings from /tg/. Making a dood with a hand crossbow, but because I have autism I want it to be fancy looking.

So /r/ing "odd" crossbow designs, size doesn't matter so much as long as it works, I can always just handwave away things like that it's rather likely to jam or other stuff if it's got a lot of moving parts.

>>34312202
>>34317799
The Crimson Caravan Merchant had some great ones. The had room for your nose so it want's smashed all the time I broke my once and any sustained pressure starts te ot as mite [painful but not with his.

>>34318685
Yer blind mate. Super Hornet has square intakes, legacy models are rounded.

Can't remember why though

What's the best type of bullet to shoot yourself in the head with? Would be a 7.62x54R. Hollow point, soft point, or FMJ? Also this would be aimed at the brain stem through the mouth, Private Pyle-style.

Asking for a friend.

File: Capture.png (244KB, 1365x766px) Image search: [Google]

244KB, 1365x766px

>>34318694
Other than the magazine being a bit iffy and probably needing a lot of force to actually pull the string by swinging it this seems like it "might" work.

I don't know shit about crossbows though.

>>34318729
12 gauge buck

>>34282691
>Not buying a $68 CMP Garand bayonet

Can anyone offer any insight on conical flash hiders? I see them a lot on LMGs and other long range suppressive weapons, do they offer any real value on a carbine? I understand they pretty much increase the bang but do they offer any sound redirection?

>>34318729
As the other guy said get anything 12 Gauge and labelled as buckshot. Slugs are fine too really.

What's a good place to order an Ruski AK parts kit?

>>34318729
If you're gonna use a nugget to an hero make sure you have no upstairs neighbors

File: miniwood.jpg (13KB, 755x210px) Image search: [Google]

13KB, 755x210px

What are essential accessories for a Mini 14? Keep in mind I live in a b& state.

I already have several 10 round mags and plan on getting the rear tech sight, an M1 carbine/garand sling, a choate handguard for practicality, and a wood handguard for aesthetics.

File: 1103.jpg (27KB, 825x195px) Image search: [Google]

27KB, 825x195px

Theres some sale thing going on herein norway, where i can get a 10/22 and a vortex crossfire 2 plex rimfire scope for like 180$

Should i jump it?

File: 1497997713874.jpg (78KB, 552x828px) Image search: [Google]

78KB, 552x828px

Is this a good deal? Feels suspicious

https://www.armslist.com/posts/6939135/detroit-michigan-rifles-for-sale--wasr-10-63--ak-47

>>34290674
Savage Axis in 270 is perfect for those conditions

Is Rem Oil a form of CLP?
>oh god I feel stupid even asking this...

File: Screenshot_2017-06-20-18-03-41.png (627KB, 1080x1920px) Image search: [Google]

627KB, 1080x1920px

I'll post here since ak general ignored me.

Ok. Just purchased a zastava pap m92. Which size thread adaptor? And why?

Pic related....cnc warrior.

>>34288296
Lee's anniversary kit

Is storing magazines loaded bad for them? Like will it weaken the mag spring out and make it less reliable over time?

File: 250px-Lahti_L-35-1.jpg (10KB, 250x166px) Image search: [Google]

10KB, 250x166px

>>34282666
so we know that some pistols (like pic related) have bolt accelerators, what about revolvers with springs to make double-action trigger pull lighter, has it ever been done in a production revolver?

>>34321726
technically, yes

it's relatively minimal for most mags so imo as long as the mag is in a dry location with stable temp and not being crushed, you're good to go

you can always get aftermarket followers if you're concerned

>>34321893
Static load will not weaken springs, temp changes and stuff doesnt affect them in any considersble ammount.

Loading and unloading is worse than just keeping them loaded

>>34321451
to 5/8-24 if 7.62 (US standard threading for most 30cal)
to 1/2-28 if 5.45 or 5.56

>>34321820
>>34321820
>>34321820

>>34322212
temp changes make the load no longer static.

>spring heats up
>spring expands, pushes harder
>spring cools, contracts, pushes less

But yeah it doesn't really matter too much. We're talking years before you'll notice it at all.

In an environment with no helicopters, how does the rear guard disengage? They have no one to cover their retreat.

I've heard that rounds like .243 and 6.5 Creedmoor can do pretty much anything .270 can, just at shorter ranges. Is this true? I'm looking for a low recoil hunting rifle.

>>34323419
>In an environment with no helicopters, how does the rear guard disengage?
what does the rear guard consist of? Where and what kind of situation is the rear guard disengaging from? Are we talking about a full-scale evacuation (think Dunkirk) or a fighting retreat (like on Karelian isthmus in June 1944)?

File: Post reticle2.jpg (32KB, 880x660px) Image search: [Google]

32KB, 880x660px

What are some readily available new/used scopes that have the german-style post reticle? I want one for a .22lr, so it doesn't have to be particularly robust

>>34323651
I was thinking a fighting retreat, though I guess both situations are interesting.

I specified no helicopters because helicopters make the situation rather simple.

>>34323687
I'd split the rear guard into two or even three parts: one retreats while the other one covers, supplement with indirect fire (as in howitzers and/or mortars) if available.

Is a Star BS pistol worth $250 as a plinking/training pistol?

>>34324104
Don't know how much they go for now but you can probably get it for around 200.
They aren't bad pistols but are prone to parts breakage and are not worth repairing.
So if you wanted something you can beat the shit out of for maybe 3000 rounds then toss, it is the pistol for you.

>>34324170
What parts are common to breakage? A lot of reviews I read point to the ejector being worthless on most of them.

>>34324212
Not sure, nothing major from what i've read just small parts.

>>34324248
Alright cool thanks for the info.

To anyone here who owns a RIA GI 1911, I'm thinking of buying one, (poorfag) how do you like it? Is it worth the money?

Looking for the image ">tfw you want to kill yourself but don't want to contribute to gun related deaths..."