At least two rifles edition
Last >>33177761
>posting in arg
>owning an AR
ishygddt
>>33185572
needs magwell
I don't own ARs. Can I adopt a trip and shitpost?
>having not one but two of these things
L m a o
>>33185612
yes of course
>>33185612
*May I
MI is garbage and Curious George is an autistic retard.
>>33185524
bithc I will sink $3k to beat that faggot
>>33185604
no it doesnt
So Colt is floundering before finally shitting itself as it expires
http://www.thefirearmblog.com/blog/2017/03/03/breaking-colt-lays-off-custom-shop-director-employees-company-rumored-gutted/
>>33185628
>MI is garbage
Truth
>>33185626
Fuck you
*kicks over chair
>>33185634
>>33185628
>MI is garbage
wrong
>>33185604
>needs a job
you don't even own one of those, fuckstain
How much will a Colt lower be worth once the company is RIP?
>>33185713
Nothing, since people will have realized they're garbage.
>>33185713
a lot more than is reasonable
>>33185713
in a few years, probably a lot thanks to colt fanboys
>>33185713
The answer will always be much more than they're worth
>>33185680
It is the vacation destination.
I put thing on USP
>>33185713
It's genius you see. The last potential offering will be a stupid expensive clone that they have nothing to do with, they may get like 12 of the "limited production" out before imploding, then all of a sudden collectors want the last, shit riddled offering from the husk formerly known as Colt, pushing up prices that much further. One last boost of cash directly into the owner's pockets since all their employees are laid off.
>>33185757
Nice Sig
>>33185757
literally the only good thing inn this picture is the stock
>>33185757
that almost makes me want a USP compact
>>33185757
Is that an ar-10? Did you build it, and if so, how much did it cost?
>>33185784
and they say glocks are ugly
>>33185556
I want to replace my mft minimalist stock now that I've had some time to familiarize myself with my rifle. I've been considering the f93, UBR (NO, ORANGECAT) or b5, leaning heavily towards f93, UBR of I am unable to find a reasonably affordable example that isn't airshit tier. Do you have any recommends? Besides putting my rifle in the garbage and killing myself that is.
>>33185772
>b5 stock
orly
>>33185799
kill the rifle and put yourself in the garbage
>>33185799
>Besides putting my rifle in the garbage and killing myself that is
No, you will need your rifle for that
>>33185807
>>33185797
wow kill yourself
i've been jacking off non stop to that single picture HK released for that last couple of days
i need a fucking VP9 L release right now
>>33185784
Nice M&P
>>33185799
Get the one on EE that's 180 if you want a UBR
>b5
Stop being poor
>>33185817
You wanna start shitposting gemfag
>>33185628
Sure there's seemly a lot of bad report about imi but my experience with them is nothing but good.
their m193 shot 2moa out of CHF&CL FN spikes barrel
I dont think I have shot their m855 but their mk262 shoot moa or submoa for me out of multiple barrel all CL. But i remember my dad later saying it shot heart size group about 3" thur that same spikes I had with newer lot of imi he brought for hog hunt. I wrote it off as him pulling it by putting inconsistent pressure with the rest on non-freefloated quad rail handguard.
I shot all my older imi and i now only have like 2 or 3 mag worth of newer lot which was ordered about last December or so.
>>33185631
Then you might want to look into getting Hodge Defense System Inc. SBR or their regular length.
You could go and make a gucci sbr or a recce/spr style ar.
if you go recce/spr atlas bipod and gucci scope is must.
what do you have in mind?
>>33185650
>>33185680
he just mistyped IMI in fit of blind rage.
>>33185817
can you be any more pathetic
>>33185818
vp9 is balanced, unlike that abortion you're drooling over
>>33185799
Keep the mft friendo.
>>33185824
I could stop being poor, but I don't want to. I've been keeping tabs on EE and my local Armslist though.
>>33185842
>balance
>wouldn't shut up about a glock 34 with x300
>>33185762
ty i like ur ar
>>33185772
That's funny because it's the only thing I don't like. Stock is fat, heavy, very wide, needless storage, but it came with the gun. Was thinking about replacing it with a MOE-SL or something not complete shit.
Side question, what specifically did I do to you to make you attack me like you do? I get the burt bashing bandwagon, but is there an actual reason? I don't feel bantz from you, just hate.
>>33185784
>almost
Well jump that hurdle and get to "want." You'll probably find those euro LEM imports resold for ~$650-700 soon.
>>33185794
Sort of, it's an Adams Arms Small Frame Patrol 308 which is more or less a clone of the DPMS G2, with minor changes and with a gas piston system.
>piston
>!
>>33185818
>veepeenein
And to think I almost had a shred of respect for you.
>>33185856
There's literally multiple LMTs for 125 all over used EE, if you're willing to spend up to 240 on a shitty ass UBR why is the LMT a problem?
>>33185824
im already in the middle of destroying one thread on /k/ i can start with this one
>>33185833
>cuts rocks and plays army man dress up as a "adult"
>>33185860
>I don't feel bantz from you, just hate.
dont take everything i say personally
>>33185867
Poordecisionmakingskills.jpeg
>>33185858
sorry, is there supposed to be an argument here or are you just weeb posting per the norm?
So, I have pic related in jail for another 6+ months (maybe I bought myself a Christmas present?).
I bought it for a 9mm pistol but it will work with 300 subsonic. I've got a start on a reloading setup already. So, I think this is the perfect opportunity to build a 300memeout AR.
Does anyone know a manufacturer for a stripped lower that will engrave my trust name before the finishing process? (so the trust name can look exactly like the roll mark). I’m going to form 1 the lower right away then build it as Gucci as I can over the next 6 months (getting the 9"ish barrel after form 1 is returned).
I'd be happy to have any other advice. In exchange I promise not to post update pics, or 'look at my sweet parts, I'll finish next week I swear'.
>>33185878
>plays army man dress up
i'm not the one who unironically owns a plate carrier
>>33185867
This hurt to look at
>>33185878
Yea I saw you posting Gravity Falls porn in another thread
And you laugh at qb for cutting rocks?
>>33185887
i dont have a pc
>>33185881
Well there is one good pistol there
Holy shit! just now googled imi m193 grouping/accuracy and I found alot of 3inch avg but i also found some 1 and 2 inch avg but theres more 3inch avg than older 1-2inch avg.
imi dropped the ball.
>>33185871
maybe its not about the money but the money to Orange's valuation of the item ratio.
>>33185885
imagine how good a VP9L is going to look with my X300u
>>33185893
he couldn't even get into the army he's so fucking pathetic
>>33185894
i wasn't looking too hard and thought you were psi for some reason
ofc you don't, you can't even remotely afford plates.
>>33185915
>imagine how good a VP9L is going to look with my X300u
worse than a glock brand glock :^
>>33185920
kek
>>33185915
<3
>>33185871
I wouldn't spend 240 on a UBR. The reason I wouldn't spend the extra money on an LMT vs a b5 is because while I acknowledge that it is well designed, I simply do not care for how it looks, so I am less willing to spend more money on it. I guess I'd probably just end up spending more in the long run anyway though.
>>33185830
I'm averaging just at the 2MOA point as well with the IMI M193 through a 416R Odin Ultralight as well as a 4150CMV melonite Faxon SOCOM. 2MOA for 193 is great in my book. Of course, these groups are bench shot with sand bags and 1-4 optics.
I have some of their 855 but haven't shot any yet. 855 should be good for like 20MOA right?
>>33185934
UBRs go on sale for $180 a lot
Gen2 is going to be that or cheaper
>>33185934
>won't spend 240 on a stock that retails at 260
Why are you even looking at it then
The lowest you're gonna get it for will be 180
>>33185932
you must have some sort of brain damage
>>33185844
I certainly don't hate it, I just want to go a different direction overall.
>>33185958
>>33185958
He's not the one that posts anime all the time.
>>33185951
180 is less than 240. I would consider 180 an acceptable price, but I am considering the f93 before I purchase a UBR. Also trying to take into consideration the incoming gen 2 may be marked lower, or make the previous generations value decrease. This is why I was asking Burt how he felt about the f93 in the first place.
>>33185886
I think they aren't rated for .300 supersonic because of the three piece aluminum construction, which is kinda worrying to me because most tube suppressors are. That's just my dumb opinion.
You could get a custom engraving of your manufacturers info from the likes of York Arms or Orion arms. I believe both of them do it before anodizing. Ident or anyone else can do engraving on a stripped lower, which you could then send out to be anodized.
I recommend having it done inside the top of the trigger area if you want it out of the way.
Also if you don't plan to sell the gun as an SBR, you don't have to engrave it. Supposedly. I took mine off.
I need to buy another handgun.
>>33185985
ikr?
i think he's fucking gay or something
>>33185920
You should get a glock next
>>33186017
i dont think your ironic homosexuality is as ironic as you think
>>33186005
Well whatever you do I'd still recommend not getting one at all, I hated mine when I had it
But that said I'll still offer you mine for the lowlow price of 200 shipped :^
>>33186052
what's ironic
Did you know you can get a Glock brand Glock at Lenny McGill's Glock Store?
RECOMMENDATION RETRACTED DUE TO MANUFACTURER DROPPING BALL MASSIVELY
SHRED OF RESPECT FOR JEWS LOST!
My recommendation for IMI ammo retracted and their mk262 is now rated 2-3 moa. older lot i shot was satisfactory submoa-hoveringMOA
I'm disappointed as fuck in IMI now.
if mk262 i have now doesnt shoot well IMI is dead to me forever!
thanks PSI and anon for making me reconsider IMI
>>33185942
m855 should be 2moa or 3 moa.
>>33185830
>what do you have in mind?
Can't say, I don't want to tip Psi off that I know what he's up to.
>>33186124
what did you do to that poor rear QD port
>>33186052
Sakuya is ironically homosexual
CG is unregretfully homosexual
Giddy wishes he was sexual at all
>>33186112
You just tipped him off.
quick delete the post!
>>33186137
pushed a blue force gear UWL through it because I like that it flexes and bends.
also the UWL makes less noise, something I didn't really like about the QD socket in the stock, which doesn't lock.
>>33186106
Told ya. Their new loads are garbage, especially the M193. They probably just took a page from Larue and figured Arfcom would buy it now matter what.
>>33186142
>CG is unregretfully homosexual
Wrong! Straighter than linear equation reporting here.
>>33186174
you don't even have a favorite boatslut you little queer
>>33186168
brb
Aww yiss.
>>33186205
>muhrin KAC rear
gay
>>33186205
looking good
>>33185572
> finger grooves
kys
>>33185556
>HOLES IN PAPER EDITION
>>33186205
Your brake is upside down dumbass
>>33186256
newfag
>>33186256
Gear Queer General is thattaway.
>>33184531
>>33186184
I like Ushio
>>33185556
What handguard is that up top?
lets get this thread back on track please
>>33186388
who do you think you are you pathetic little fuck
>>33186393
the only person you'll ever love
>>33186388
People who use velcro to secure their pressure switches need to be chemically castrated.
>>33186412
tail cap master race
Best muzzle devices for a 16" middy that won't be suppressed??
>>33186431
you're pushing it
>>33186442
That's straight as fuck
>>33185556
Hold on guys, you need to wait for me to post the Gold Standard here first, so you have a proper frame of reference to compare all your shitty AR rifles to.
Try not to cry too hard though.
>>33186124
I like everything on that gun, except the flash hider
>>33186460
Hetero-normative 4 life!
>>33186460
>>33186460
Wat
>>33186487
Labia
>>33186487
It's a feminine penis
>>33186483
Heck yea my dude!
>>33186509
here we go
mods i have nothing to do with this one
>>33186487
Disgusting outie pussy
>>33186528
Prolapsed vagoo
>>33186500
>>33186509
>>33186528
I don't know, that almost, kinda looks like a nutsack. I am hesitant. You all might be kinda gay.
>>33186573
This isn't /brg/
>Thread
RIP pepperonis
I hate ARs now.
How do I install and time a sf3p? How many shims do I need? It's for a 55.6 barrel.
>>33186747
rtfm
>>33186756
gfy
>>33186756
The manual is garbage
>>33186747
Probly someone has posted a YT video of the procedure.
thats the first place i check for things like this if the part doesn't come with good instructions
>>33186747
also, i think you use "crush washers"
>>33186807
>"crush washers"
>>33186793
>>33186780
The instructions are fine, anon is just retarded
>>33186800
>2
>not "approximately 3.5"
Lurkmoar faggit
>>33186225
>my special babby hands can't handle this grip
>>33186780
are you actually legitimately retarded?
>>33186818
>doing some new
>asks for advice
>retarded
>>33186831
>shits on others
>assmad when they shit on him
High capacity keks
Also
>mfw tripfag
>>33186818
>doing some new
>asks for advice
>retarded
>>33186876
>>mfw tripfag
>>33186847
I don't think we're supposed to use that word any more. Especially in front of them.
>>33186780
Read harder
>>33186776
Yeah, concise, descriptive manufacturer's instructions are a trick, into the trash
>>33186831
But he's right. Literally no good production pistol or rifle has finger grooves because only an idiot flunky engineer would think that every hand is shaped the same. pic related
>>33186873
>asking 4chan for help on anything
you're really asking for it buddy
Caught dad and brought his one box of 69gr smk fgmm. the box look like he dropped it but its fine cause those have good plastic case that protect the cartridge well. (just now feel funny calling 223 "cartridge")
then i went backyard to estimate how much bamboo I would have to cut to have line of sight to bigger backstop.
the estimate is "a lot"
about 400 mature poles, 10 babby pine tree about 6 inch thick trunks and smaller, one or two unknown tree with lighter colored bark and wood tree maybe a birch again about 6 inch diameter or less. plus about 200 dead bamboo laying in 5ft high pile across would need to be moved or I would need to make a raised stand out of perhaps bamboo to shoot over the pile.
I think it would take me a month if i went at it daily for about hour.
fuuuuuck!
then i check to see if few box left of 69gr fgmm I had is all same lot as they should be.
they arent only two box is same lot and one isnt plus a box from my dad.
I mixed the lots box when I move/rearrange them and shot away all of the big two lots i had.
i have three different lot probably year between them one off box and my dad's the one off lot number is semi- close to my pair of same lot.
those are $1 per round still
fuuuuuuuck!
>>33186906
Wtf is this blog post. It's like a special needs student slammed a speedball and found an ipad.
>>33186906
>tfw cant spam report him for being off topic and squid him into oblivion
>>33186906
also all of those fgmm brass say '14 but thats bullshit i think unless i luckily brought them from store that have them sitting for years.
or fed just made shitton brass in '14 that last them beyond.
>>33186184
sure i dont but at least I like 3dpd
>>33186431
mfw
>>33186460
nope >>33186487
thats balls
>>33186500
u wot m8
>>33186528
>>33186557
>>33186573
dude. its balls.
>>33186747
That looks like a three prong flash hider/suppressor quick mount. I read that you don't want to use crush washers for a suppressor quick mount.
Just get a couple of shims, and try to get it indexed around 12-o-clock or so at around 20-40 ft-lbs.
If it's not a suppressor quick mount, just get a crush washer and crank that shit till one of the prongs is at noon.
Pro-tip, a crush washer can be crushed at least 360 degrees.
>>33186941
Just admit that he's your son. The apple doesn't fall far from the tree.
>>33186987
It's for the suppressor. Just going to. mess around with it until I get the logo facing upward with the shims.
>>33187014
Not him, it takes a little playing and trial and error, but it's not difficult. Look at these retards. If they can do it, you can too.
>>33186992
> Fat fuck had skeletal for a son.
It sure look like the fat fuck have very good fat retention!
IMI the best. I heard they got their powder from a Polish supplier.
>>33186992
My wife has dwarfism and would never have been able to birth a full size autistic spergoid. That's pretty insensitive to my wife, who has lived through two car accidents and a toppled stack of Monster pallets.
I suggest you apologize.
Also reminder that pmags are you know what
>CG making fun of Burt
Burt BTFO forever
>>33185556
I sold my 14.5 for $2.2k so i can buy nvg.
>>33185966
B5 is best 5 this kryptek one cost me like 25 bucks
>>33187104
Acog and all, minus the can?
>>33186876
>lolumad posting
>>33187104
Certainly your talking pesos?
>>33187122
Nice target
>>33187056
> Polish supplier
if that's true that would be the fault of their downhill in group size.
I think it actually would be bullet overcrimping or inconsistent in crimping.
I'll maybe pull one to find out after i continue look in attic for acog and more optics I think i still have if I havent sold them off.
>>33187141
You're a target
>>33187161
I'm not a cat
>>33187104
Literally no one bought that, or any single component from that.
No one.
>>33187175
No one likes you
>>33185572
I installed most of the Zev starter kit in my 17 yesterday. It's bretty gud
>>33187104
noooooooooooooooooo
>>33187104
End of an era(?)
>>33186879
>>33187131
Lol tripniggers unite, anal sex to follow
>>33187160
>Polish
As in Aschuwitz. IMI. Aschuwitz. Israeli Military Industries. Aschuwitz, Poland.
>>33187175
Well, technically i bought every component of that rifle.
>>33187122
He's just sleeping right?
>At least two rifles edition
>>33187268
Well... shit
>>33187189
Post your ar little guppy
>>33186747
55.6!!!!!! HOW BIG IS THAT?!?!?!?!?!
https://en.wikipedia.org/wiki/5_cm_Pak_38#/media/File:Bundesarchiv_Bild_101I-549-0743-13A,_Tunesien,_Soldaten_mit_Pak_38.jpg
That's like a 5cm gun!
>>33186881
How does that Steyr shoot?
Do you have a G19 to compare?
>>33187317
I'm sorry, I don't shoot my guns anon. :( Can't make it out the door anymore
I don't have any glicks to compare
>>33187303
>>33187430
trash
>>33185582
Wow that's pretty. Are slide safety's really shitty or is that a meme?
I only have these two guns so far. The ar is named ancalagon the sks has no name as of yet. Is it weird to name your guns /k/?
>>33187438
They're shit.
>>33187460
Yes you fucking autist
>>33187460
No.
>>33187430
kys
(am i doing it rigt)
>>33187438
People have different opinions but functionally no, they're not shit. Any normal sized human can reach the levers and they work as a safety/decocker while moving the lever out of the way of your thumb, which some like. The fat, gnarly lever can be annoying to grab when you're trying to manipulate the slide, but that's why it's serrated farther forward.
>>33187466
Which one have you got? Can I see pics?
>>33187476
but why? I gave her life, shouldn't I get to call her by a name?
>>33187460
cringe as fuck
>>33187460
when you name anything "ancalgon" thats pretty goddamn autistic
>>33187532
hey how about fuck you.
>>33187548
What did you think was gonna happen?
Nobody likes a cringe autist. Go to reddit cringemaster
>>33187480
I've got a CZ clone with a slide safety and I hate it. The only upside is that I can half cock the gun for the first double action shot.
>>33187572
>On /k/
>from r*ddit
, I'll have you know I'm from /fit/.
>>33187598
Even worse
now we now how you contracted severe autism
>>33187631
maybe but I can still kill someone when I run out of ammo.
>>33187548
Sorry to say, anon isn't wrong. You asked a question, don't shoot the messenger.
>>33187645
With you fag aids
>>33187655
cheque'd, but I'm afraid you're the fag aids carrier, I bet you carry a hi-point.
>>33185650
>Colt
>dying
Naw. Someone will buy or bail it out.
>>33186877
Lay off my pepe
>>33187585
Well I can't comment on a Jericho 941 safety because I don't have one, but I have four Walthers and a Beretta with slide mounted safety/decockers and none of them get in the way or are unreachable. Maybe it's just Jerichos that have shit safeties and generalizing isn't fair?
>>33187702
The only people that would buy Colt right now are hawks trying to squeeze as much money out of the brand as possible, which is the same thing that has happened for the past few decades, and Colt is getting to the "last few dollars" part.
>>33187737
Should I grab a colt 1911 while they're still in production?
>>33187711
Mines a TZ-75 with the slide safety. It's not that I can't reach it, it's that it's pointless because I can get good purchase on the hammer to decock. I'm used to that with my 1911s which is why I don't care for it.
>>33185871
Is the SOPMOD even a good stock? Or is it just a meme at this point since there are more modern options.
>>33187797
It's very comfy and comes with snack tubes.
>tfw unironically want a colt brand colt 1911
>>33187797
It's a really good stock. I regret considering it a meme and wasting a lot of money on just about every other stock out there before finally giving it a chance.
Two
>>33187850
Yet you can't afford McDonald's
>>33187850
You sure you don't want a Sig for $300 less that also includes a rail, checkering, better finish, and modern aesthetics all of which are missing from the Colt that costs more and won't have any customer support soon?
>>33187770
I mean, if you want. I'd still rather find a Series 70 anyways.
>>33187913
well I like to collect historical weapons. So I might.
i'm back. my knee and backhurts ill continue next week.
>>33187907
>cast slide
>>33187907
He can barely afford ramen noodles right now.
>>33187893
i dont know how i feel about those guns
>>33187907
no, i want a older looking one so i can feel like marv in sin city
>>33187906
working on that
>>33187893
I got to play with the one on the left, it felt like a dildo.
>>33187969
Nice try boyo, they're forged like literally every single other 1911 manufacturer.
>>33188001
That's stupid but if that's all you want then buy a $400 Springfield GI or RIA and enjoy shooting it. You can't justify the jump to an entry level triple-priced Colt on those grounds.
Or for $800 you could have a Sig overflowing with features. Extended magwell, frame checkering, dust cover rail, Novak sights or whatever, all kinds of shit that even a $1,000 Colt doesn't have.
>>33187804
>have to take stock off to get to snacks
If I had know that I probably wouldn't have bought it...
>>33188037
sig 1911s are complete dogshit, quit trying to get fluffy to buy ever worse guns
>>33188074
He can't afford it anyway.
>>33188001
You've been "working on that" for over 6 months now. You fail at everything. It's time to kys
you guys like my new mirage cover?
if you fags can do AR clones i can get a 1911
>>33187265
>Israeli Military Industries. Aschuwitz, Poland.
the fuck?! why have i never heard of this i though imi was in israel.
>>33187907
> SIG 1911
> external extractor
no thanks you have poor taste
springer professional is way to go. or RO for poorfags.
>>33188123
Kys
>>33188133
Holy shit you're retarded. This needs to be capped.
>>33188056
Any volunteer want to try out the SLS and report back? Compare it to the SOPMOD.
>>33188162
Been there. SOPMOD is better.
>>33188074
Please provide evidence to support your claim, as I'm going to purchase one and would like to know what you've personally experienced with your Sig 1911. Can you please provide photos of the problems you've had, or describe how Sig customer service handled your specific issues?
Thank you very much in advance anon for proving yourself different from the aimlessly meming noguns who lie on the internet about things they have no experience with.
>>33185556
>>33188133
>>33188149
got me gud! mis-read that as Auschwitz
in my head i thought "jew make imi factory at auschwitz to honor muh 6 million"
>>33188193
I'd rather call you a faggot and tell you to got to r/guns if you want that sort of bullshit you fat diabetic fuck
>>33188201
Why does 4chan randomly rotate pictures. Pretty annoying
>>33188133
Holocaust joke. Went way over your head.
>>33188223
Are you saying that you don't own a Sig 1911 but you're still talking about them anonymously on the internet?
Anon.
>>33188001
They work well.
>>33188193
I have handled few sig 1911 and two if them on separate occasion would close after locking lack on empty mag when i eject the mags.
but i will give them that the slide to frame is smooth and had hair to zero play it was machined to fit.
why is a 10'' AR so fucking comfy
>>33188227
>iphone user
Thoughts on NSN: 9150-00-985-7245 for use a Lubricant for guns?
Found a source that is selling it for literally $2 for a tube of 8oz.
>>33188251
I wonder if you can get through a magazine with that not jamming.
>>33188241
>doesn't understand the lorentz effect
>thinks I'm going to talk to him like an adult
>>33188261
>>33188193
I've -heard- of extractor issues, but that may have been one batch. Bad Springs or extractors breaking, but this was like 4 years ago.
>>33187669
hi-point is what your mamma calls my dick.
it's big, heavy, and has a low capacity.
>>33188251
You fucked up one of the best looking guns on arg.
>>33188251
Because you also love 10 inch cocks on you anime girls.
>>33188228
oh man! it sure did.
I'm tired. been wake for maybe 26hours or so. I volunteered for certain activity today. but i cant sleep yet.
>>33188186
It's just released. You've already tried it? What's wrong with it? On paper, it's the SOPMOD 2.0. No memes.
>>33188271
thats Aeroshell 7
>>33188281
that's an old photo but i'm probably going back to that
this is boring
>>33185556
R8, h8, continue to masturbate
>>33188288
>10 inch cocks
that's not very feminine
>>33188291
I'm working on 20+ right now as well. Winding down with a little COD4 Remastered free for all.
>>33188297
It's not the SOPMOD. I dunno. I might buy one for an upcoming build.
>>33188223
literally who are you and why are you on this burt vendetta?
>>33188311
>2017
>Guyslee
If digitz, ALG will win the next SOCOM contract.
>>33188261
It's good for installing barrel nuts... It will take a long ass time to use it all up... Might as well just buy some generic moly grease.
>>33188321
hung traps are the only good traps
>tfw you have to come to /arg/ to escape the autism
In other news the sky is down, hell is cold and Burt is young and skinny.
>>33188321
But you like them girly with big dicks.
>>33188324
>Winding down
>COD4 Remastered free for all
is 64 player shipment a thing again?
>>33188331
>>33188338
Is that an A1 stock?
>>33188251
just wait until you get your can, something about petite, chunky guns that feels so right
>>33188353
Yes.
>>33188251
literally best length, especially with suppressor
>>33188337
This. If you gotta have a dick on your girl, it better be a huge one.
Are Criterion HBAR barrels good?
>>33188354
>just wait until you get your can
that would be part of the reason to go back
and the 14.5'' larue barrel back on my SPR
>>33188324
yea i forget to include before last 26hrs i haven't be sleeping enough for days and i'm trying to straighten out my sleeping schedule and today will be the day when it get straighten.
>>33188358
Where did you get it? I have been looking at the numrich surplus furniture kits but I don't want to get one that is shit...
>>33188352
I think G rails are now 6061, so they might as well be ALG. MK1 is the only true G rail.
>>33188383
Fulton Amory.
>>33188374
very. i love criterion based on their rep.
they cryo treat their barrel and it shows.
cryo treatment benefit is real no meme.
>>33188387
doesnt matter that they are 6061 they have strong like fuck profile.
Stripping optics with nail polish remover is a bitch.
>>33188440
SCAR/LMT guy?
>>33188345
Yeah might not be the best for winding down but I am getting my operator in.
>>33188429
They don't feel as nice as 7075. 6061 has a cheap rougher texture. I think RIS II is the other older rail that's 7075. Very few of them are.
>>33188460
No, your mother. You dumbass fuck.
>>33188469
i'm going to make note to treat you like garbage more
>>33188492
SCAR/LMT guy is in fact a huge douche
>>33185556
fuck flashlight mounts
>>33188492
That's how you are to everyone though.
>>33188528
sometimes it's not sincere
>>33188513
Can I take a saw to the adjustment portion of a mil-spec buffer tube to covert it to work with an A1 stock I have? I don't want to buy a buffer extension piece and either I cut the tube down or I try to cut the A1 stock to work with the current tube.
>>33188387
"The SMR MK1 is machined from a semi-billet extrusion made from aircraft grade aluminum."
>>33188464
> feel
doesnt matter, still would buy geissele smr again.
also
> long as fuck barrel nut for maximum contact surface with handguard.
> double tighten crossbolt and cant pull off when crossbolt is in but easy to pull off for cleaning, greasing underneath handguard.
> adjustable anti rotational screw at both side.
> aesthetic like fuck
>>33188387
>>33188550
"The MK8 is machined from a semi-billet extrusion made from aircraft grade aluminum."
>>33188544
>>33188513
>>33188544
wrong and wrong.
buy rifle extension you retard.
>>33188537
It always seems it. Wanna give a short list of the posters you actually hat
>>33188537
you playing buttfield tonight?
>>33188460
Yes.
LMT is getting NF
SCAR is getting Trijicon 1-8
>>33188588
*hate
>>33188575
I'm
>>33188513
not
>>33188544
>>33188619
>>33188588
fluffer
leon
most everyone else is in on it
>>33188607
that's what i thought
makes sense
Citristrip and a papertowel is sooooooo much easier
So, who makes the best magazines?
>>33188644
>mfw
>>33188658
<3
>>33188661
Penthouse
>>33188644
>fluffer
fluffy is awesome, be nice to him
>>33188677
>>33188661
Magpul
Lancer
That is all.
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
new thread >>33188700
>>33188577
that's more money i dont want to spend man.