AR THREAD GENERAL AR GENERAL /ARG/

File: image.gif (2MB, 500x391px) Image search: [Google]

2MB, 500x391px

>>30676003

>giddy is an asshole to old people edition

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676003
>inb4 psi posts those few horrendous looking bitches

I don't mind but please only show us the good ones

File: batman.jpg (1MB, 1920x2880px) Image search: [Google]

1MB, 1920x2880px

>>30676004
i dont really care for the A2 stocks. the length of pull is to much.

>>30676003
should have named it "giddy triggers fags edition"
still can

>>30676022

>>30676003
>not dead wives edition
There's hope for you yet.

>>30676022
Giddy is an asshole to everyone.

File: Gun1.jpg (155KB, 800x450px) Image search: [Google]

155KB, 800x450px

Posted at end of last thread.

Got this 18" SS upper with an A2 stock and LPK a few days ago. what are thoughts on A2 Stocks?

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>30676022
>giddy is an asshole edition
ftfy

Qb you here yet?

File: pewpewmachine.jpg (2MB, 1920x2880px) Image search: [Google]

2MB, 1920x2880px

>>30676016
get more mags. I have around 50 and i still buy more.

Get some sights first and then worry about all the other piddly shit.

>>30676048
You've got no room to talk either faggot

File: image.jpg (27KB, 480x203px) Image search: [Google]

27KB, 480x203px

>>30676003

>>30676048
POST YOUR RIFLE, FAGGOT.

What's the best barrel profile for a 14.5 inch general use carbine?

>>30676059
I hate that picture so much

>>30676048
tell me youve bought something new for your build

>>30676068
Shooter or SOCOM, depending on if you want light or heavy.

>>30676068
also, 5.56 or .223 wylde?

File: image.jpg (89KB, 436x1380px) Image search: [Google]

89KB, 436x1380px

>>30676054
No idea what you're talking about anon

>mfw ordering SCB from D60 and then ACS from qb
Then on to my upper

>>30676060
See above

>>30676074
Most recent is rail but just last night qb is gonna sell me a stock that I'm gonna use on my M&P tbhfam

File: twins copy.jpg (3MB, 2160x1440px) Image search: [Google]

3MB, 2160x1440px

>>30676003
In for hopefully my buddy buys my spare LPK, some of my magazines, and an extra MOE grip so I can buy other AR shit.

File: WP_20160718_007[1].jpg (3MB, 3072x1728px) Image search: [Google]

3MB, 3072x1728px

>>30676068
So long as it's not Govt., you're good.

>>30676085
Literally doesn't matter.

.223 wylde has the POTENTIAL for marginally better accuracy WITH TRUE MATCH AMMO (not this CBC/IMI "mk262" bullshit). You will never see it with production 5.56, and you won't see it without benching and bagging the gun and having a high magnification optic to reduce aiming error.

File: helmetcam.jpg (124KB, 720x960px) Image search: [Google]

124KB, 720x960px

>>30676003
In for Finally brought her Home

>>30675936
Bought it for $650 in 2011 in that condition

>>30675949
I'm not complaining until people tell me to :3

>>30675977
My AR cost me over $1300 including the trigger (ETA TBA) and my P38k conv. cost me around $900.

>>30675988
I get paid barely above minimum wage to talk to idiots all day at a Class III dealer, it sucks but at least I have some fun with it.

>>30676004
Do yourself a favor and just buy an A1 stock from Fulton

>>30676094
>See above
That's just a handguard, not a rifle.

So a handguard is all you have? Why are you here?

File: gear - guns.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676094
Oh man, I'm so impressed, you have a list of things you're going to buy? That changes everything

File: derpstick.jpg (706KB, 1920x1280px) Image search: [Google]

706KB, 1920x1280px

>>30676102
love buying me some mags, almost as much as i do flash lights.

File: image.jpg (2MB, 3264x2208px) Image search: [Google]

2MB, 3264x2208px

>>30676115
I posted the m&p. Er, well half of it I guess. It's pretty uggo

>>30676117
Who are you?

File: image.jpg (74KB, 479x720px) Image search: [Google]

74KB, 479x720px

>>30676072
Yeah me too. Here is qt Jessie Abbate to make up for it though

File: 20160625_163117 (2199x1105).jpg (2MB, 2199x1105px) Image search: [Google]

2MB, 2199x1105px

>>30676033
couldn't find a pic of a dead old woman with an ar

>>30676048
qb died, doc said he got the aids from nick and msd was infected too.

>>30676041
see >>30676114

>>30676085
Which costs less, goyim?

>>30676117
Buy a shotgun

File: Mike copy.jpg (3MB, 2754x1836px) Image search: [Google]

3MB, 2754x1836px

>>30676052
I need to get more mags also.

>>30676085
5.56 if for a SHTF duty rifle.
.223 wylde for range gun.

>>30676048
Pls dump all lizerdpics

File: 1.jpg (230KB, 800x600px) Image search: [Google]

230KB, 800x600px

>>30676151
Call. Me. Daddy

>that Monstrum optic

File: image.jpg (962KB, 2048x2048px) Image search: [Google]

962KB, 2048x2048px

>>30676155
Shit, now how is he gonna send me my stock?

>>30676173
Hey m8

>>30676176
K hol up

>>30676178
I know senpai. I know.

>>30675977
>Think I may get them just for the hell of it. They're not expensive anyway.
go for it, like i said they cleaned up the pull on an expensive trigger that was otherwise going to be a huge disappointment if i hadn't....

File: gear5.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676160
I wanna get a 590 or a 590A1 when I get the time, I'd rather get a 9 or just some more camo for collecting purposes first though

>>30676107
I'm still surprised you don't go free-float.

File: image.jpg (1008KB, 2048x2048px) Image search: [Google]

1008KB, 2048x2048px

>>30676186
2/2 unless anon has requests

File: IMAG0195.jpg (257KB, 1280x768px) Image search: [Google]

257KB, 1280x768px

>>30676117
we posting M1s now?

File: image.jpg (1MB, 2446x2989px) Image search: [Google]

1MB, 2446x2989px

>>30676176
Here's my work crab

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>30676196
That is free float anon

>>30676208
Post a pic of the shop. Is it decent or one of those shitty stereotype mom and pop fish stores

File: nido_Garand.jpg (78KB, 960x720px) Image search: [Google]

78KB, 960x720px

>>30676206
sure

File: fishternk.jpg (786KB, 1920x1080px) Image search: [Google]

786KB, 1920x1080px

>>30676201
do you buy or breed your reptiles?

Im looking to buy a morph ball python but have no idea what websites are good.

>>30676186
pretty sure stocks are illegal in cali
>tfw bed time

File: 20160716_191454.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>30676114
Nice you're in shape.

>>30676041
Get something with an adjustable length of pull. It is the god damn current year.

>>30676128
I've got around thirty 30 rounders, so I think I can sell 8 or 10. I need the cash anyway. Plates and making my 10.5" into an actual rifle are priorities right now.

>>30676219
>That is free float anon
Oh shit, you're right. I thought I saw a gas block cap

My bad MSD.

File: rsz_20160218_150628.jpg (4MB, 3984x2241px) Image search: [Google]

4MB, 3984x2241px

>>30676114
What makes the A1 substantially better?

File: M1.jpg (93KB, 640x960px) Image search: [Google]

93KB, 640x960px

>>30676206
I'd rather see M1s than Lizzie's handguards again

File: mutant.jpg (1003KB, 1920x1080px) Image search: [Google]

1003KB, 1920x1080px

>>30676237
10.5 is best .5

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676224
I do not breed my own personal animals.

What reptile experience do you have?
Next time I hope on TS we can chat about it and I can give you some pointers

>>30676234
Reee

>>30676173
How do your teeth smell?

File: 20160716_173205.jpg (4MB, 2938x2203px) Image search: [Google]

4MB, 2938x2203px

>>30676201
>>30676186
God damn you have a lot of critters.

Which AR vise block should I get?

http://www.ebay.com/itm/NO-M-A-R-AR-15-Upper-Receiver-Vise-Block-Armorers-Gunsmith-223-Barrel-Nut-Tool-/122020863201

or

http://www.ebay.com/itm/Gun-Smithing-Tool-AR-Upper-Receiver-Vise-Block-for-223-5-56-Rifle-Repair-/281816338058?hash=item419d900e8a:g:5aUAAOSwVL1WDzRn

The first one is obviously optimized for flat top uppers. The second can be used for both flat top uppers, and those with fixed carry handles. I own an A2 with a flat top upper that I might want to change out some day, but I don't like the idea of a flat top torquing around in there. Ideas?

File: image.jpg (152KB, 750x683px) Image search: [Google]

152KB, 750x683px

>>30676201
Where's that one where it was saying
"Your ar15 is shit"
I love that one lizard that gets posted all the time.

File: electricboogaloo2.jpg (873KB, 1920x1080px) Image search: [Google]

873KB, 1920x1080px

>>30676245
Thats the only pic i have of my M1. Its kind of a safe queen since i bought it for 1k back in '11.

Its a Springfield 1944 that was re arsenaled by RRA

>>30676252
I had a ball python back in the day. Had it for a couple years before I went to school

>>30676237
That's my dad and I almost didnt have the heart to tell you. I'm conditioned, but not what I'd call "in shape"
>spooky scary skeletons

I honestly look like I fell out of a Norman Rockwell painting.

>>30676243
>aesthetics
Also its shorter and more comfy, better for close quarters and just about everything that isn't prone or bench shooting.

File: Pmag.jpg (401KB, 1920x1280px) Image search: [Google]

401KB, 1920x1280px

>>30676282
neither, get the BEV block or the guysnamedlee action block

File: 20160409_144238.jpg (1MB, 1755x1265px) Image search: [Google]

1MB, 1755x1265px

>>30676269
Right now pretty good.
I need to go buy more toothpaste.
Why the fuck are you asking?

>>30676288
I don't take many pictures of anything, especially since I only have my phone for it. Did you not know of the CMP in 2011? I got pic related 1941 SA with original stock for 650 through them

>>30676282
Yep. I think that those pics are pretty up to date though

>>30676286
I think giddy has it. I love the smug little bastard

>>30676288
Oh okay. Where are you located? I might be able to reccomend a good breeder but it's kinda a long shot.

Whatever you do, don't buy from a big box pet store.

How pleb am I? Need suggestions on a new hand guard, lightweight and keymod

File: rsz_20160613_142903.jpg (4MB, 3984x2241px) Image search: [Google]

4MB, 3984x2241px

>>30676293
It's an 18" Wylde barrel. I don't know if it will be used for anything but bench or range shots. A2 it is.

File: raifu.jpg (3MB, 1920x2880px) Image search: [Google]

3MB, 1920x2880px

>>30676307
i knew of it and have participated in a Appleseed shoot last year. But it was a factory refinished M1 with all the paperwork from the Govt when the dude bought it from them in the 80s? I was the first person to fire it and that alone made it worth 1k to me.

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>30676318
Damnit

>>30676282
ignore >>30676302
get this https://www.botach.com/kley-zion-ar15-m4-barrel-spline-socket-rod/

File: image.jpg (1MB, 3024x4032px) Image search: [Google]

1MB, 3024x4032px

>>30676322
I'm looking for an 18" 223wylde barrel around $250. What do you have?

File: 2016-04-24 08.23.30.jpg (2MB, 2988x5312px) Image search: [Google]

2MB, 2988x5312px

>>30676309
>Where are you located?
indiana mate, like Fort Wayne area. Thats where I got my first python. Holy fuck mites m8. Battled that shit for like 2 months.

File: 20160709_192346.jpg (4MB, 3264x2448px) Image search: [Google]

4MB, 3264x2448px

>>30676282
I meant I own and A2 with a fixed carry handle upper that I might want to change out.

>>30676293
Is he in his 40s or something? How old are you. If your dad looks better than you do you should seriously be ashamed. Well maybe he's already ashamed enough for the both of you. It depends.

>>30676302
I'm not spending $50 on something that I can spend $15 on instead.

File: image.jpg (2MB, 2446x3123px) Image search: [Google]

2MB, 2446x3123px

>>30676219
It's pretty fucking grimy, I'm trying to clean up but it's hard with all my other responsibilities

I'm going to tackle the mold growing in the corners of the shop tomorrow

It's really irritating cause I feel like I care more about the shop then the owners sometimes

File: 2016-07-15 00.19.47.jpg (2MB, 2988x5312px) Image search: [Google]

2MB, 2988x5312px

>>30676335
thats a decent option as well, but holy fuck tooling marks batbuttfucker. No wonder its $40

>>30676327
Fair enough, I kinda like the idea of an original better though, but I'm also an autistic collector so who cares.

Pics of paperwork?

File: 2016-07-01 02.10.30.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>30676353
>not spending money on tools
m8 just spend the money on something that isnt shit. Those platic shells make you take your optics off and dont always work for every type of rail either.

>>30676355
>It's really irritating cause I feel like I care more about the shop then the owners sometimes
except you don't because you won't clean that bucket on your own accord, you'd rather take pics of it and post it online and complain about it on a malaysian thumbwrestling forum than actually clean it.

>>30676303
Its a fetish thing I think. What bones?

>>30676307
>no pic related
I drove up in 2011 and got mine for that too.

>>30676318
UTG Pro makes some affordable shit

>>30676322
Make sure it has the trap door.

File: Chilly.jpg (2MB, 2184x2912px) Image search: [Google]

2MB, 2184x2912px

>>30676353
>I meant I own and A2 with a fixed carry handle upper
Ill trade you a 20" flat top with detachable handle for it assuming it isnt fucked up

File: image.jpg (1MB, 2864x3817px) Image search: [Google]

1MB, 2864x3817px

>>30676344
Yeah dude, big box stores are generally better for supplies but are shit for animals and they don't tell who their suppliers are so there's no way to know

>>30676355
>mold
Jesus Christ

File: 1453313309726.jpg (32KB, 679x688px) Image search: [Google]

32KB, 679x688px

>>30676286

File: image.png (451KB, 442x427px) Image search: [Google]

451KB, 442x427px

>>30676377
Oh look it's you

>>30676392
You have no idea

File: 13632790_10157076063580414_1042246911_o.jpg (563KB, 2048x1152px) Image search: [Google]

563KB, 2048x1152px

>>30676343
PSA 18" 1:7 Stainless. Can be had for about $100.

File: 20160709_191427.jpg (2MB, 2255x1729px) Image search: [Google]

2MB, 2255x1729px

>>30676318
Free float rail?

BCM KMR is my vote.

>>30676322
Nice rife. A2 wouldn't be my first choice functionally but it will at least look good.

>>30676327
Your shots are nice.

>>30676328
What is wrong with your current rail?

>>30676335
>https://www.botach.com/kley-zion-ar15-m4-barrel-spline-socket-rod/

Thanks but I'm really just trying to decide between the two that I linked. I'm very poor.

>>30676353
>I own and A2
I fucking hate when I do that. I need dinner.

>>30676393
Fuck yes
Thank you

If you have anymore, feel free to drop them in your posts :>

>>30676393
Look at that smug little bastard

>>30676398
You need to fix that shit or quit my dude

>>30676399
How well does it shoot?

File: 1453401013261.jpg (133KB, 678x688px) Image search: [Google]

133KB, 678x688px

>>30676414
only other one i have

>>30676416
do you ever shove him up your butt?

File: 2016-03-25 01.01.50.jpg (2MB, 2988x5312px) Image search: [Google]

2MB, 2988x5312px

>>30676362
i cant seem to find the pictures i took of them and its too late in the night for me to dig em out and take more. about to hope off of here in a second. Sorry, hold me to it though. Ill be sure to take some and post em.

>>30676392
for sure, thats why im trying to find an online retailer that deals with reptiles

>>30676429
No. I do not put things, or animals, in my butt.

File: SurefireMB556K.jpg (869KB, 1920x1280px) Image search: [Google]

869KB, 1920x1280px

>>30676400
thank you

File: 20160319_170603.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676372
You're probably right mate. Cheaping out on tools rarely pays. Shit.

>>30676382
>It is a fetish thing

Now I'm creeped out dude.

That is a good question about the bones. I think it is a deer and what we're looking at is one length of vertebrae and one length of neck. What is your guess?

>>30676383
Pics please. I am interested. Not fucked up, maybe 1000 rounds through it.

>>30676353
He's in his late 40's and weighs around 280, the way he's standing hides it. I'm 19 and have to eat 2200 calories a day or I lose weight.

I tried being /fit/ and I could cut but bulking does nothing. 3k cal. a day gains me 5lbs every two weeks, but as soon as I quit eating at that volume I lose it. So I'm just gonna be thin for a while.

File: image.png (243KB, 750x1334px) Image search: [Google]

243KB, 750x1334px

>>30676429
Kek

>>30676439
You're missing out

File: danger.jpg (147KB, 833x1368px) Image search: [Google]

147KB, 833x1368px

>>30676431
This is one of my favorite images ever.

>>30676450
>All them GI's
Do you prefer black or gray?

File: Front copy.jpg (3MB, 2700x1800px) Image search: [Google]

3MB, 2700x1800px

>>30676447
This was taken with a real camera I assume?

Most of my shots are shitty cellphone ones but I have a few that were taken with a nice camera.

My old roommate took this one.

File: 12948505_10156700462855414_1469413860_o.jpg (198KB, 2048x1152px) Image search: [Google]

198KB, 2048x1152px

>>30676416
I have yet to test it out. Just bought a new house, been renovating that piece of shit.

File: image.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

>>30676431
Why online?
I'm sure there is reptile shows around there and then you can look at the specific snek in person and check its health as well as get a feel for the people selling it.

I'd normally say to check rescues first but they can be shady sometimes and I don't support that.

Meet and great w/ the seller is my favorite thing tbhfam. What's your budget for snek and terrarium?

File: PrecisionBullshit.jpg (609KB, 1920x1080px) Image search: [Google]

609KB, 1920x1080px

>>30676450
as someone who spends $250+ on a single micrometer, spend the money on your tools. If you ever have to sell them you'll get your money back. Its like Snapon vs china brand

>>30676398
>Oh look it's you
>say you care about the shop
>stand around a filthy net bucket and complain about it on the internet when it takes 30 seconds to rinse out

oh look, you're still a fag. take the initiative and clean it without being told dumbass.

>>30676485
I don't know where your getting this impression I didn't clean it

File: 1468800596972.png (1MB, 859x1221px) Image search: [Google]

1MB, 859x1221px

>>30676473
the high quality images that i have are from DSLRs. Either a Nikon D3100 or a Canon T3i. Shit DSLRs in the DSLR world, but the work for what I do.

>>30676470
mine as well.

>>30676476
Never heard of a reptile show near me, then again i've never been interested in one. Probably around $600 for a snek, i have the terrarium figured out already.

>>30676450
Definitely ungulate, my guess is deer or cattle.

File: 20160709_191326.jpg (3MB, 2947x1877px) Image search: [Google]

3MB, 2947x1877px

>>30676457
Damn how fucking tall are you guys? Hickok45 and son status or what?

Dude 3k cal is nothing. I breakfast with 6 eggs, 6 sausages, 4 pieces of toast, jam, and cheese every morning. I never understand how some people just can't bring themselves to eat.

>>30676470
The black ones are actually Israeli steels. I'm trying to sell them to a friend right now.

Grey USGI magazines upgraded with Magpul followers are a fantastic value.

File: image.jpg (917KB, 2399x2503px) Image search: [Google]

917KB, 2399x2503px

>>30676475
Ah okay. Do be sure to report back, pls.

>>30676468
Charge your fuckin phone you literal pleb

>>30676480
>that colorfill
Nice

>>30676516
Well I'd def. look into it. Any ideas for a morph?
I really like pie bald pythons

>>30676503
well you see, you shirked your responsibility and took a pic of it instead of saying you had to clean it.

>>30676516
Are snakes that expensive

Why don't I just grab a garter snake out of my backyard

>>30676525
>not being 6'5

can anyone give me a quick rundown of the /k/ approved AR brands and ones to stay away from? I'm currently looking at the Colt LE6920 and had a friend recommend Stag, but I've seen some people call them mediocre.

>>30676557
colt > stag

simple enough

>>30676525
>Grey USGI magazines upgraded with Magpul followers are a fantastic value.

Do you mean legit GI ones, or repros? I have two Brownell's repros that seem to be working great with magpul followers.

Would like to have a legit issued GI mag, since I have bakelites and steelies for my Wasr.

>>30676525
3000 calories is a lot to HAVE to eat literally everyday. It's a lot of time eating and a lot of money. People don't understand how much time I spent a day eating just to get my calories in during bulking; I had to eat a peanut butter bar every fucking hour. i hate peanut butter ;-;

I'm 5'11" and he's 6'01". His brother is 6'03", sister 6'00", and father is 6'07"

File: 20160707_174317.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30676475
Nice picture and nice AR. What magazine is that.

>>30676480
What do you work in? Your standards are obviously much higher than my own. I've got all harbor freight stuff except my combination wrenches are Craftsman.

I'm sorry dude but I'm probably going to cheap out and get one of those Ebay vise blocks.

I do have nice Snapon torque wrench that I got in a trade. Shame it is 3/8 drive, meant for engine building I assume. My 1/2 torque wrench is china freight.

>>30676524
Haha you taught me something.

File: image.jpg (74KB, 736x578px) Image search: [Google]

74KB, 736x578px

>>30676543
There is a few (like two) scaleless ball pythons that were supposed to sell for like $100k because they literally exist nowhere else.

Pic is piebald

File: stillshitrifle.jpg (774KB, 1920x1280px) Image search: [Google]

774KB, 1920x1280px

>>30676537
no idea, im sure ill see one and fall in love with it. I love snakes in general.

>>30676543
just specialty ones

well im out of here folks, later taters

>>30676439
does your wife tickle your taint with her tongue?
if not you should try it.

>>30676557
Colt name comes with an markup. You can build a functionally equivalent or better rifle for less.

>>30676586
Machinist. Mics are the cheap tools as well.

>>30676590
muh dick

>>30676590
what a cute snek

File: image.jpg (514KB, 681x1024px) Image search: [Google]

514KB, 681x1024px

>>30676590
I saw a lady on craigslist giving away 2 ball pythons for free a couple months ago

Should of got em

>>30676598
Come back soon

>>30676557
Don't get Colt or Stag.

Radical Firearms is poorfag status. S&W is respectable middle tier. Windham is great for production rifles. Daniel Defense is high-tier.

Remember, fashion > function

>>30676620
>Should of
lol tripfags

File: 20160423_161400.jpg (3MB, 2938x2203px) Image search: [Google]

3MB, 2938x2203px

>>30676557
Unless you are actually jonesing for the pony you can build a half gucci rifle for the cost of a Colt.

>>30676569
Legit USGI mags are really perfectly acceptable once you upgrade the followers. I got a shitload at a gun show in packaging and everything.

>>30676570
He's 6'1" and 280 lbs? I'm very skeptical.
You're right, it is an entirely different matter when you HAVE to.

>>30676598
Snakes are really great little critters. They aren't the blood thirsty baby killers they get made out to be

>>30676604
No

>>30676613
>>30676615
I know right? That's the wife's dream snek and they are really neat, specially in person

>>30676620
No, you honestly shouldn't have. Craigslist is not a good place for that

File: 20160313_101151.jpg (1022KB, 1648x1013px) Image search: [Google]

1022KB, 1648x1013px

>>30676613
That is a cool job. Industrial? Science R&D? Guns?

>>30676632
Radical Firearms uppers are more expensive than PSA uppers dude. I went to their warehouse/factory in Houston and their shit seemed pretty legit to me.

File: mag.jpg (22KB, 450x800px) Image search: [Google]

22KB, 450x800px

>>30676586
Thank you. I've heard that from you before. It's apparently a Bushmaster?

>>30676003
This image is photoshopped.

File: image.png (918KB, 750x1334px) Image search: [Google]

918KB, 750x1334px

>>30676652
What About this one

>>30676706
No

File: WO_L2332---600.jpg (324KB, 429x600px) Image search: [Google]

324KB, 429x600px

Girls with guns are my jam.

I think I got interested in it back in 2008, the hey day of AAC and Noveske in the AR world.

File: Hillary-Clinton-Benghazi-Email-Bombshell.jpg (197KB, 1400x700px) Image search: [Google]

197KB, 1400x700px

>>30676652
your loss

>>30676677
and?

File: image.png (867KB, 750x1334px) Image search: [Google]

867KB, 750x1334px

>>30676725
Idk what the fuck this but it's pretty cool

>>30676638
might be down to 260ish now

>>30676672
FWIW we were having issues at a machine gun shoot with our M16 because the bolt had been gassed in for suppressor use blah blah

We threw a Radical upper on and it went through 2000 rounds in an hour and a half, smoking fucking hot, and actually held up great. PSA is cool though too.

>>30676748
It's similar to a monkey I think.

>>30676740
God I hate that cunt

>>30676748
Weird

File: 920x920.jpg (63KB, 920x733px) Image search: [Google]

63KB, 920x733px

>>30676770
don't we all

>>30676606
>>30676632
>>30676638
So essentially order a kit from PSA is best?

>>30676858
Yep. Just not ptac

>>30676382
It does.

>>30676677
what's photoshopped about it?

>>30676823
mfw you reply with someone even worse

>>30676114

>buttstocks don't go on your bicep
>hour support hand isn't doing shit sitting in front of mag well
>tuck that elbow Mr. 90's S.W.A.T
>"I don't know what I'm doing" = bladed stance
>feet too far apart

your shit is all fucked up. first thing first, you need a shorter length of pull so you can hold that damned rifle like a man, instead of a manlet. move that support hand forward about 4 inches. you don't have to go full on chris costa but goddammit man you should grip that forend like your grip your boyfriends throbbing black cock.

i'd try to help with your stance but i'm almost out of beer so it's sleepy time. all jokes aside.... at least you're not fat and your rifle is sexy

>>30677145
the support hand is fine
the bladed stance is not a problem, he's clearly not wearing any body armor to present
rest is agreeable, if you followed the thread you'd see that it's his father, not the poster.

>>30677145
This is how I shoot, I can get some damn good accuracy out of it and I don't see any of your critiques as anything more than strictly subjective.

This stance is nice because it is not fatiguing so you can do it for hours at the range. Or hours in a gun battle. Or whatever might require you to shoot for a long time.

I use a heavy-built A2 with HBAR though so that might be part of it.

File: 20160409_132857.jpg (2MB, 1958x1469px) Image search: [Google]

2MB, 1958x1469px

>>30676761
>We threw a Radical upper on and it went through 2000 rounds in an hour and a half, smoking fucking hot.

That is good to hear man. A lot of guys on here shit on them even though they have never shot one. I've never shot one but I've seen the operation they are running down in Houston and I think they are legit.

Hardened Arms is also up there.

It is a shame these completely competitive and viable options are simply outshilled by PSA simply because PSA has been in the game longer.

>>30676858
See my post above.
https://www.hardenedarms.com/ecProduct_444_27


I bring tidings from /pol/
Please check out this video:
https://www.youtube.com/watch?v=_47-epAfUKE

>>30677407
>It is a shame these completely competitive and viable options are simply outshilled by PSA simply because PSA has been in the game longer.
agreed, desu I hate PSA

how's it going up there tonight btw?

File: 20160716_191441.jpg (3MB, 2938x2203px) Image search: [Google]

3MB, 2938x2203px

>>30677551
In /pol/ or in Colorado?

PSA is okay stuff, but their market share is far too big.

I'm going to start unapologetically shilling Hardened Arms.

>>30677551
B C M
M
A
S
T
E
R A C E

>>30677407
PSA will fall by the wayside one day. Just like CMMG did.

>>30677602
in colorado

just catchin up with ya

PSA's customer service is not that great.

>>30677626
bcm aight

Alright guys I'm completely fucking stumped.

Got a BA barrel in the mail today and spent the afternoon installing it. All went well, until I dropped a BCG in...it wouldn't close and lock up. The lugs on the bolt seem to hit the lugs on the receiver extension. I took the bolt out of the carrier and dropped it in to make sure it wasn't the key having an issue with the gas tube...nope, it slides back and forth like silk. No catch there at all. Put the bolt back in, sure enough it won't close.

So I take the barrel off, clean it up, clean the threads, examine the little indexing notch on top. Seems okay, not deformed to my eye. Plug barrel back in, check for play, none. Pretty snug. Torque and back off barrel nut a few times, then torque it down for good. Same issue again.

So I back off the nut, torque it again, past the point where the nut indexes with the gas tube, then back it off just a hair so it indexes correctly...now I can get the BCG to engage if I apply a fair amount of pressure.

So I put the upper on the lower, grab the charging handle, pull it back and it won't even move a quarter inch before it binds.

Swapped a few different uppers on a few different lowers, different BCGs, and the problem is with the new upper. Every other rifle upper/BCG/lower combo works flawlessly.

What do? How did I fuck up?

>>30677883
Oh and I checked the barrel extension ramps to see if they line up with the cuts in the upper receiver when the barrel is on and fully torqued, and they seem to me to be damn near perfectly aligned.

>>30677883
>>30677905
pix, sounds like the upper is machined poorly

inb4 'doesn't matter, all recievers are the same' muh milspec dimensions are widely known.

just to fully eliminate the possibility, can you remove the gas tube and install the barrel to make CERTAIN the key isn't hitting the tube cockeyed?

pix are the best thing though, especially pix of the barrel installed in the upper looking AT the chamber from the mag well opening side (dont pin it to the lower to take a pic dummy)

What's a good side mountable laser optic?

File: IMAG0576.jpg (253KB, 899x1177px) Image search: [Google]

253KB, 899x1177px

>>30677992
>>just to fully eliminate the possibility, can you remove the gas tube and install the barrel to make CERTAIN the key isn't hitting the tube cockeyed?
Forgot to mention, I did run the BCG without a gas tube and it wouldn't close.

After working the bolt back and forth manually a bit more, I can now get it to almost close under its own weight when I hold the upper at a 40 degree angle, pull the carrier back, push the charging handle forward and latched, then drop the carrier. But! As you suggested with the upper possibly being out of spec, I see now a very obvious point of wear inside the upper where raw aluminum is exposed.

File: IMAG0578.jpg (465KB, 1365x1157px) Image search: [Google]

465KB, 1365x1157px

>>30677992
>>30678061

File: Screenshot from 2016-07-19 04-26-42.png (19KB, 318x109px) Image search: [Google]

19KB, 318x109px

Should I just get an M&P15 or would I actually be better off building my own? I've heard some debate over this in the past, and I have seen videos on how to build one and it doesn't look any harder than building a computer which I've done.

I have a sister who is extremely anti-gun and she's specifically afraid of the AR-15 death gun assault-type weapon. She thinks nobody should be allowed to have/shoot one.

However, I am nogunz. I've been going to gun shows and renting guns at the range and I like the M&P15 (haven't shot any other AR-15's) but I don't know if I could build my own for the same price and have it actually be better or what.

>>30678061
>>30678062
it appears the carrier is being forced upward in the upper, or that outcropping is too close to the carrier (i.e. bore of the carrier machined wrongly)

you should try to measure it in relation to some other points in the upper and compare with other uppers.... i suspect it might be the upper?

put old barrel back in and test again. im serious. did the gun function before?

>>30678082

>put old barrel back in and test again. im serious. did the gun function before?

It was a virgin upper today, but now I think that's exactly what's happening. It seems like as the bolt begins to engage with the extension, the carrier is striking that surface and possibly knocking the bolt out of alignment which was causing it to not close at all. But as it wears it seems to be improving. The question is, do I just let the BCG and upper continue to pair that way or should I get a new upper?

Steel BCG should not be damaged by aluminum upper...it should continue to file that surface down until it's no longer in the way. But could it be dangerous?

>>30678061
>>30678062
also is this occuring with the upper alone pulled off the lower? or pinned together?

do you see corresponding aluminum being deposited on the carrier in different places other than the one you circled?

check the carrier for that, or look around for a corresponding bottom-located wear mark ramping the carrier up into that part circled in red

sorry for the contrived process, it takes a lot of fucking around with shit to troubleshoot. fucking around and parts swapping every part posible. old barrel included

>>30678099
>Steel BCG should not be damaged by aluminum upper...it should continue to file that surface down until it's no longer in the way. But could it be dangerous?
you'll have a less supported BCG, i'd send the upper back if you can conclude it's actually the cause of the issue. like i just said, swap a lot.

who makes the upper and what model is it?

>>30678108
Aero forged upper. Super disappointed if this thing is out of spec as an Aero lower I've had for some time now has been outstanding.

I could try to take it back to the shop but I bought it a while ago as I began planning this build and no longer have a receipt. Maybe I could get Aero to swap it, but again, no proof that I'm the one who bought it first.

I'm going to check wear on the carrier in a bit here to see if that tells me anything.

>>30678127
you MAY be able to save yourself time by not using a barrel nut (if you can properly support the barrel.

or just install the nut enough to hold the barrel in place but no specific torquing.

as a matter of fact, if you got this from a shop you should take your barrel, bolt, upper, and charging handle over there and see if they'll let you put the barrel on a different upper from a different maker and show them yourself the problem. or another aero upper if you're feeling brave. if it is the upper you might get lucky and find another one that's poorly machined (if that is indeed the issue). that can be good for your case if you are trying to get a refund/exchange

but like i said if you dont torque the nut down hard, you can have it hold the barrel in place to test the issue on a lot of uppers pretty quickly.

>>30678143
I bought the barrel and bolt separately from the upper, but the shop I bought the receiver at offers the full course of gunsmithing services and they specialize in ARs, so I'll most likely swallow my pride and go ask them for help.

>>30678068
Build.

Buying individual parts is cheaper if you look for sales. You're probably going to want to switch out parts eventually so you might as well get what you want to begin with. You'll want the tools required to build anyway because they're necessary to take down the rifle all the way, which you should always be able to do anyway. You'll learn the ins and outs of the rifle quicker if you build. You'll feel proud looking at it if you build.

>>30678153
you don't have to have bought it from them to ask them why it wont fit in the upper that you DID buy from them.

take em your stuff and show em it wont work, i'd doubt they would deny trying to make it right. i am so damn curious about what's wrong. somehow let me know. this shit interests me a lot.

>>30678171
They wouldn't do that, they're awesome guys I'm sure they'll help me figure it out. They're fucking hardcore AR geeks too. I just wanted to do a full build myself, but you don't really learn anything when nothing goes wrong.

>>30678180
>but you don't really learn anything when nothing goes wrong.

true that, i like gathering failures for future reference so definitely follow up if you can

>>30678196
Was looking forward to posting the finished project here, so I will. May not be able to get it to the shop tomorrow but hopefully will before the weekend so I can go shooting.

>>30678202
cool, got any pics of your parts so i can recognize it later? mock up build?

>>30678206
Lighting is pretty dogshit atm, but I don't think anyone on /arg/ will have exactly the same setup

>KEK Shockwave brace
>Spike's Cock Dual lower (I know I know)
>Centurion C4 Carbine w/ FSP cutout rail
>Ballistic Advantage 11.5 barrel w/ A2 FSP (that iconic triangle gives me boners for days)
>Magpul K2 grip
>MBUS rear (temporary)
Haven't decided on final muzzle device or optic yet, or the BUIS. Muzzle device will be dictated by what suppressor I choose for my family of rifles. Like what I see from Griffin Armament though, what with being able to mount to their own line of flash hiders and brakes or also a NATO spec A2 flash hider.

Will try to get some mock up pics tomorrow

>>30678223
>>Spike's Cock Dual lower (I know I know)

>>Ballistic Advantage 11.5 barrel w/ A2 FSP (that iconic triangle gives me boners for days)

i have a carbine length m4gery without freefloat so i know what you mean. also it's a spikes as well.

i'll be lookin out for it

>>30677145
Lol that's my dad in his mid-40's and he's never shot an AR15. When he was in the service they drilled with Garands, qualified with M92's, then never touched firearms again.

I always liked shooting with my dad but until a few months ago he was pretty anti-"assault weapon" so he's allowed to have some fun. Don't want to scare him away from it by being too critical.

>he's also left handed and just shooting righty for shits

>>30677407
Honestly considering a RF .300 upper because its a lot less shekels and the performance is there.

File: IMG_6743.jpg (3MB, 3024x4032px) Image search: [Google]

3MB, 3024x4032px

>>30676450

just get a bev block. hard to beat for $50

File: image.jpg (2MB, 3195x2448px) Image search: [Google]

2MB, 3195x2448px

in

>>30678441
>considering a RF .300 upper
ew

File: compare1.jpg (220KB, 1280x683px) Image search: [Google]

220KB, 1280x683px

Is there anyone who's actually taken the classic A2 birdcage and improved upon it, specifically for flash suppression.

I'm kind of looking at the KAC M4QD NT4 flash hider, but can't really find any reviews on it. From what I've read BCM, DD, Vltor, Griffin, and the like that make their own version of the A2 don't seem to supress flash quite as well and the advancement of a comp is negligible.

File: eokekisashit.jpg (3MB, 3049x4209px) Image search: [Google]

3MB, 3049x4209px

Hi /k/ommandos

Thinking about getting a flash hider back on my Troy.

Don't get me wrong, I love my Lantac Dragon and the shitmoving it does around me...But hey, when you're near someone it's really shitty as fuck.

I nearly made cry a kid at the range the other day and some old folks just left when they saw the fireballs.

File: tumblr_nyo8q8Zkl81sey30ro1_1280.jpg (92KB, 900x900px) Image search: [Google]

92KB, 900x900px

Getting bcm upper and lower sometime soon. PSA still processing my kit Reeeeeeeeeeeeeeee fuck you guys

File: image.jpg (350KB, 959x776px) Image search: [Google]

350KB, 959x776px

>>30678777
KAC A2 Clone

>>30678792
That sucks, how long ago did you order the PSA?

>>30676003
In

>>30678806
On the 12th i ordered all 3 upper is coming today though

File: m4_qd_flash_supp.jpg (69KB, 2000x630px) Image search: [Google]

69KB, 2000x630px

>>30678806
This shit ?

>>30678806
>KAC A2 Clone
Isn't that longer than the standard A2. How does it compare to the Vltor VC-A2?

Are there any fixed a-2 style rear sights that are 1) high quality, and 2) dont have giant lugnuts hanging off the side?

>>30678777
Fuck... I want this stock

>>30678906
no

File: DSC02065.jpg (1MB, 4535x1652px) Image search: [Google]

1MB, 4535x1652px

>>30678920
It's top notch honestly. I love those kind of stocks ever since I had a MP5SD

Even had one on my VZ58

>>30678906
No, you have to get the giant lugnuts.

>>30678962
Maybe I'll pick one up for my AK. I just bought a B5 SOPMOD enhanced stock for my AR yesterday

>>30679012
To be honest, I really miss my sopmod. I'm trying to convince my father to change his CTR for a sopmod but, meh, he likes it this way.

Do you guys trust Optics Planet's estimated lead times?

I'm looking to order the new Surefire DS-SR07 tail cap and switch assembly for their scout lights and they claim to have an estimated shipping date of 7-16 days. I got lucky with my MRO from them but I've also heard others complaining about them.

>>30679052
I'm keeping my CTR for now as a backup. I just gave my friend my ACS and replaced it with a SOPMOD. If I like it enough, I may replace the CTR with the SOPMOD Bravo

>>30679068
Urgh. The SOPMOD bravo is ugly as fuck.

File: you know me.jpg (25KB, 211x289px) Image search: [Google]

25KB, 211x289px

>>30676003
You know what's funny?

I can snap and kill every mother fucker on this board if we met IRL.

Seriously, think about it. I'd have your windpipe crushed, your nose flattened, your teeth shattered, your fingers broken, and your eyes gouged out before you would even know what's happening.

You guys talking big shit. Watch yourselves.

File: AR15A4Start.jpg (513KB, 1325x603px) Image search: [Google]

513KB, 1325x603px

What next for my AFourgery?

Keep in mind I am trying to do this entire build under a grand.

I am at $500 in for the ACOG, $350 for the parts, $20 on the KAC.

Got $230 left, budget is king.

File: 8inch czech pos.jpg (2MB, 3570x2007px) Image search: [Google]

2MB, 3570x2007px

>>30679094
Come and see, kiddo, come and see. I'll have you know that I graduated top in my fingerfucking class. I can kill you with my index in more than 700 different ways.

You had to open your mouth, didn't you ? But now it's too late. You're fucking dead kiddo.

>>30679130
Where'd you get an ACOG for $500

Also should I buy an 1-4x Accupoint?

File: 1442749419356.jpg (244KB, 1920x1080px) Image search: [Google]

244KB, 1920x1080px

If I was to buy a free float handguard would I be able to install it without a vice?

Live in an apartment don't got anywhere to install a vice.

Wait if I buy a complete upper with bcg will I come with the gas block and rod installed already?

File: BRAidsPooHK.jpg (780KB, 1859x742px) Image search: [Google]

780KB, 1859x742px

>>30679150
Broke people needing money. Was never mounted either.

And yes. I got this older one for $200. Older 1" tube model.

>>30679152
>tfw when you know you will never get a girlfriend reloading your ammunitions in lingerie

>>30679138
>wake up
>mom and three daughters stabbed in the cooch by a durka for how they dressed
When are you guys rolling out Madame Guillotine again?

>>30679152
I imagine loading does get done in underwear, but i don't think you'd want to see it. :-D

>>30679094
What the fuck did you just fucking say about me, you little bitch? I’ll have you know I graduated top of my class in the Navy Seals, and I’ve been involved in numerous secret raids on Al-Quaeda, and I have over 300 confirmed kills. I am trained in gorilla warfare and I’m the top sniper in the entire US armed forces. You are nothing to me but just another target. I will wipe you the fuck out with precision the likes of which has never been seen before on this Earth, mark my fucking words. You think you can get away with saying that shit to me over the Internet? Think again, fucker. As we speak I am contacting my secret network of spies across the USA and your IP is being traced right now so you better prepare for the storm, maggot. The storm that wipes out the pathetic little thing you call your life. You’re fucking dead, kid. I can be anywhere, anytime, and I can kill you in over seven hundred ways, and that’s just with my bare hands. Not only am I extensively trained in unarmed combat, but I have access to the entire arsenal of the United States Marine Corps and I will use it to its full extent to wipe your miserable ass off the face of the continent, you little shit. If only you could have known what unholy retribution your little “clever” comment was about to bring down upon you, maybe you would have held your fucking tongue. But you couldn’t, you didn’t, and now you’re paying the price, you goddamn idiot. I will shit fury all over you and you will drown in it. You’re fucking dead, kiddo.

>>30679171
Nice. I'm just thinking about upgrading from my MRO to a variable Trijicon. How much slower is the red triangle at 1x going to be than a plain 2moa red dot?

>>30679188
Wait what ? Didn't catch up with the news lately, what happened ?

Also : Don't start me up on them. I live everyday now, knowing that the happening will happen this year.

>>30679188
Holy shit, it's making my blood boil

Absolute or Lower 1/3 cowitness for a red dot with folding buis?

File: Cartoucheroué.jpg (80KB, 479x364px) Image search: [Google]

80KB, 479x364px

>>30679305
Make it happen already, France's history is essentially the citizenry putting up with shit for too long, snapping, and then plunging Europe into chaos for the next 20-30 years.

>>30679363

That's personal preference. I like absolute, but I think lower 1/3 is more popular.

File: WP_20160718_006[1].jpg (3MB, 1728x3072px) Image search: [Google]

3MB, 1728x3072px

>>30679363
Either/or, 1/3 tends to be better suited for a fixed FSB though.

>>30679380
>>30679392
Just curious if I should spend my money on an absolute mount for my MRO. Sold my upper with a FSB and Lower 1/3 mount and am building a new upper with KAC buis and am considering going down to absolute.

>>30679427
If both of your sights are folding, you'll be fine no matter which you choose. I've always found absolute w/ fixed FSB to be needlessly cluttered.

>>30679378
I know, I know. Trust me, it's hard when I take pictures of the sandniggers to give intel to the police on the local drug trafic to not take a picture with another objective...

File: confusedgoat.png (118KB, 623x733px) Image search: [Google]

118KB, 623x733px

H1 or T1?

>>30679452
T1. That's not even a question.

>>30679452
I bought an H1 instead of a T1 for my AK. No problems with it, that said I have to live with it knowing that it's not quite as tacticool as I'd wished it was.

>>30679474
Exactly. It's like my Eotech 512. It's okay but I know it will never have that Nightvision button. Even if I don't fucking own nvg.

Other than that, it's an Aimpoint, you can't go wrong. But really, if the bucks ain't a problem, go for T1.

>>30679188
Holy shit, that little girl is hospitalized in my town.

Fuck them, for fuck sake.

File: 2016-04-04 06.07.17 1_resized.jpg (2MB, 2656x1494px) Image search: [Google]

2MB, 2656x1494px

>>30679498
Yeah, I was impatient at a time when I couldn't find a T1 anywhere and didn't want to spring for a T2. Got a good deal on the H1 with an ARMS mount but I still wish that I had held out.

I just keep the lens caps over the white Aimpoint logo and H1 marking on the side lol

>>30679452
buy my t2 with mount for $650

>>30679550
Link?

>>30679550
I don't know how y'all do it.

I'm sorta just waiting for something like that to happen near me.

File: 4e1401a6-ae8f-4d93-a7cf-a0b4ee42fca9_zps0bfd877d.jpg (204KB, 1024x768px) Image search: [Google]

204KB, 1024x768px

>>30679474
>>30679498
T1 is only about $20 more than the H1 on Amazon, was just wondering which one would be more ideal since I know fuckall about the specifics of their MD models. I've got a job coming up and should have some spending money, and I think the only thing I really want to do with my AR is upgrade my optic since I FF nao.
>>30679575
And have it die on me within the week? No.

>>30679599
ok

File: image.jpg (2MB, 3449x1993px) Image search: [Google]

2MB, 3449x1993px

>>30679599
Post FF my dude

File: goatdance.gif (162KB, 540x498px) Image search: [Google]

162KB, 540x498px

>>30679611
>>30679392

File: image.jpg (3MB, 2119x3262px) Image search: [Google]

3MB, 2119x3262px

>>30679392
ew

>>30679637
Looks pretty okay

Have you noticed an increase in accuracy?

>>30679582
Saw that on tv.

What lo-pro rifle/carbine bag should I get?

>>30679671
I haven't even shot it yet, just installed it yesterday and I got a dining room and kitchen to paint today.

>>30676041

The magpul foxed MOE is more modular and comfy for about the same cost as an A2.

File: 1449113790363.jpg (29KB, 340x372px) Image search: [Google]

29KB, 340x372px

>trying to set up my ar
>about to spend $400 in parts
>put in an order for an arisaka light for $160
>bought a D3 sling for $90
>need a light mount for it, freefloat handguard
>need a way to remove my castle nut and install a qd sling swivel mount
>considering on just not doing it and saving my money

How do you people do this. I have to meticulously research on what handguard to buy, where to source the tools and what are good tools to buy, how to stake a castle nut, how to properly torque a castle nut, drive an a2 fsb out, fuck this shit.

I might just buy an moe handguard and be done with it and not bother with freefloating this motherfucker.

/blog

>>30679786
we aren't lazy retards

>>30679786
>>30679801
this

>>30679786
>I have to meticulously research
Yeah, but I think it's fun and enjoy learning about all of the different options and products out there on the market and seeing what works with what.

File: IMG_3817.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

How do I mount a small rail for a flashlight on my hand guard without putting my KAC RAS on? I like the sleek hand guard, without the jagged edges like the RAS has. Also cuts down on weight

>>30679903
Put your KAC RAS on

File: 20160719_112020 (2500x1406).jpg (2MB, 2480x1402px) Image search: [Google]

2MB, 2480x1402px

i took a picture

>>30679929
Are you a lefty?

File: IMG_3783.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

>>30679903
It has holes on the bottom and top of the handguard.

>>30679920
Saw that coming.

>>30679933
No, fortunately

>>30679938
>Saw that coming.
imo you can never have enough KAC 2bh

>>30679943
Just curious. Saw you had a tape switch and the light on left side of your rails.

I can't wait to get my tape switch and move my light to the right. Personal preference though.

File: 6afc1cd1efeb3a5268c3795c4b2cf2c1.jpg (31KB, 600x400px) Image search: [Google]

31KB, 600x400px

>>30679903
>How do I mount a small rail for a flashlight on my hand guard without putting my KAC RAS on?

http://www.impactweaponscomponents.com/product/tmc-scout-light-mount-n-slot/

This thing

>>30679929

Who's the gas regulator on your upper made by again?

File: ilikegreyisall.jpg (2MB, 3024x4032px) Image search: [Google]

2MB, 3024x4032px

>>30679786

have you ever heard of youtube

What do I need for a DPMS AR308 that I can't use standard AR-15 parts for?

Or would it be smarter to buy a basic bitch AR308 and add a 24" bull myself?

One last thing, i need a refresh on which twist rates are for what, is it "higher ratio= longer distance"?

Real last thing, polymer ergo thumbhole stocks, are they a thing for AR?

Well, I've ordered everything for my new upper... So the fun of shopping stops and now the waiting stops and it hits me how much I've spent.

Now I just wait.. and wait..

>>30680192
what did ya get

>>30680192
>>30680201

Yea, now we get to judge you.

>>30680147
>polymer ergo thumbhole stocks, are they a thing for AR?
ew

File: image.jpg (162KB, 736x552px) Image search: [Google]

162KB, 736x552px

Shock I paint my ar?

Are Colt 6920 barrels any good? They're on sale right now, which is what's determined my rifle's configuration so far. The online thing holding me back from buying it is that it comes with a carbine gas system, but I've read mid is better for it's 16 inch length. Is it that big of a deal?

>>30680255

I wouldn't. But then again, for some reason I like my rifles to actually look good.

>>30680201
>>30680208
>BCM stripped upper
>BCM ambi ch
>BCM bcg while I wait for Cryptic Mystic Black to come back in stock
>BCM BFH LW 16" barrel and gas tube/block
>KAC M4QD NT4 flash hider
>KAC Micro rear
>KAC M4 front sight
>DD Lite II
>New Surefire DS-SR07 switch assembly for my M600
>New absolute mount for my MRO
>10 magazines
>B5 sopmod enhanced

>>30680064
Innovative Arms

>>30680269
T.boring person

>>30680269
A lot of paint jobs look good

>>30680275
>BCM ambi ch
stopped reading there. not bad

>>30680210
No u

>>30680286
>stopped reading there. not bad
Should I return the BCM ambi for a KAC ambi ch? I really don't want to spend $150 on a charging handle

>>30680336
I like the raptor. A few people here prefer the bcm though

>>30680336
No, the bcm is goat but punk-bitch is a craptor shill who doesn't want to admit that he has buyers remorse

>>30680266
They're only available in M4 profile, which is the worst possible profile.

The quality of the barrels is decent though. If they're at least 30% cheaper than a BA barrel, I guess it'd be okay, but a BA Hanson profile is bestest right now.

>>30680266
How much?
Go Mid-length
Go lightweight profile

>>30680350
>craptor shill
kek. the raptor is aesthetic af, that's what I care about.

>>30680275
KAC flash hider is a bad choice, get something else

File: c3e25b59-a9e6-479b-ac80-119a7bae9f9a.jpg (144KB, 1080x913px) Image search: [Google]

144KB, 1080x913px

Can anyone tell me what handguard this is?

>>30680405
>form over function
Gay

>>30680454
Why?

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

Is buyers remorse the new meme?

File: IMG_20160719_131433.jpg (1MB, 4000x1282px) Image search: [Google]

1MB, 4000x1282px

How did I do? Waiting for PSA lower parts kit now lol

File: wmVaRJq.jpg (165KB, 1000x1778px) Image search: [Google]

165KB, 1000x1778px

>>30680525
>new

If you were to buy an off of the shelf 20" A4 clone, would you buy FNH or Colt?

>>30680356
What's wrong with an M4 profile?

So friday I'll get both my eyes blastered. Finally no more glasses soon. Though he told me "no violent sports".

Does that mean I can remove kebab if I have a flash hider and not a big ass comp ?

>>30680559
M4 profile takes all the negative aspects of government profile, except makes it even worse with the M203 notch that you will never, ever use.

>>30679130
Stolen valor rear sight, kac grip and rail covers

File: mlokislovemlokislife.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>30680529

you did fine

>>30680557

FN

File: OH_NEPTUNE.png (519KB, 628x641px) Image search: [Google]

519KB, 628x641px

There's a complete DPMS lower for sale at my LGS, and I'm looking to build babby's first (budget) AR. The price seems fair, should I buy or avoid DPMS in favor of PSA or Aero ?

File: 1428294461188.png (391KB, 600x800px) Image search: [Google]

391KB, 600x800px

>>30680571
I wish I could find my glasses

>>30680596
It's all the same garbage

File: 300SpecialSnowflake.jpg (783KB, 2125x1196px) Image search: [Google]

783KB, 2125x1196px

>>30680557
FN because Colt is dicks.

Or Del-Ton

>>30680530
How much is shipping going to be?
I'll send you an email either this Friday or next

>>30680606
>Or Del-Ton
you should leave

File: 5457064+_e1333220969dc9b6ddf0f8caa29998cb.jpg (54KB, 457x381px) Image search: [Google]

54KB, 457x381px

>>30680609
just send me your address and i'll invoice you
it's going to be the cheapest USPS service

>>30680609

what are you buying

>>30680626
ACS

>>30680615
Ur not ATF right? Cuz I'm totes not atf

File: 5749139+_db13c9db3cdc93d99e5fc8e77661d3e6.jpg (35KB, 350x396px) Image search: [Google]

35KB, 350x396px

>>30680626
oy vey, fuck off
this is my goy
you're not going to under sell me

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30679216
It's not quite the same, but I'm slightly slower with my ASCC than I was with a dot. I do like the flexibility of a variable optic, but I don't really care for the added weight.

>>30680634

oh

>>30680638

only thing im selling right now is a pack

>>30680634
sure mr notatf
you're only going to get my PO box as a return address

File: image.jpg (3MB, 3612x2808px) Image search: [Google]

3MB, 3612x2808px

>>30680638
Idk half price is Bretty Gud. It's not completely cucked up right?

>>30680648
Ye I'm gonna put it on my M&P and maybe the ALG until I can get my upper and lower finished

>>30680654
Fair enough

File: image.jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

Gas tube hole slightly covered up should I return this barrel? Sorry for bad quality pic.

>>30680668
just rotate it you fucking punce

>>30680484
>he doesn't enjoy the best of both worlds
lmao@u

File: 6117-33.jpg (53KB, 461x210px) Image search: [Google]

53KB, 461x210px

>>30680688
remember he broke his by forcing it open with a screw driver