/akg/ AK General

File: RI218201.jpg (24KB, 800x315px) Image search: [Google]

24KB, 800x315px

>>30286303
So what's the deal with Hungarian AKs? They're pretty cheap. How are they are as far as quality and reliability are concerned?

So what's better, Wolf or Golden Tiger?

I can get wolf for a little cheaper, but I've heard bad things about it

how does one go about building an AK from a parts kit? Can I buy the receiver at a gun store?

File: 1461000280967.jpg (860KB, 770x5634px) Image search: [Google]

860KB, 770x5634px

>>30286585
Golden Tiger>Tulammo>Wolf

That being said, your rifle is an AK and will fire whatever you load it up with. Just make sure to clean and lube after and you'll be fine.

>>30286585
Golden Tiger is WAY better in my opinion, noticed parts were less dirty than with wolf also more accurate. Laquer coating and sealed is a plus too

>>30286833
Kits can be sold anywhere. You'll have the biggest selection online. Apex gun parts and Atlantic firearms are a good place to start

>>30286833
1. typically gunstores will not have ak receivers b/c building one is much more difficult than putting togeather an ar

2. youll need a 12 or 20 ton shop press, rivet crushing tools, barrel pressing tool, headpace gauges, a spot welder, if you get an 80% lower chances are youll need a bending die, then a MAP gas torch to heat treat the FCG holes.
TL:dr its a lot of fucking work

good stuff here https://www.youtube.com/playlist?list=PLAE577579342DC51D

File: Photo_2016-06-15_02-28-06_PM.png (1MB, 1936x1936px) Image search: [Google]

1MB, 1936x1936px

Which one is better, /akg/?

File: photo_1465847361245.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>30286303
Gotnmy first AK! Feels good

File: image.jpg (2MB, 4928x2304px) Image search: [Google]

2MB, 4928x2304px

>>30287050
Under folders are cool and all but the only ones I've shot have been flippy floppy, I personally wouldn't get one

>>30287082
What is it and where is it from? New or used? Also, more pics please that stock is sexy

>>30287103
Not to be cheeky but that's not what I asked. Of the two, which is better?ive never heard of bhi. Are they better than century?

File: 20160613_133626.jpg (4MB, 5312x2988px) Image search: [Google]

4MB, 5312x2988px

If my mak90 is an angle cut reciever, does anyone want to buy it for a deal?

File: image.jpg (3MB, 3264x4928px) Image search: [Google]

3MB, 3264x4928px

>>30287082
Nice triangle stock, I wish I would've bought the SLR 107 that came with it, but I went with the poly solid instead

How are the new WASRs?

>>30287050
Pretty sure black heart is American made, which is a no go for me

>>30287157
Good, just INSPECT for the love of God.

What are the best accessories for a standard AK, and where are good resources for accessories?

>>30287298
>accessories

Specifically furniture

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>30287119
What state you in ?
> I'm really loving the plum pic related

>>30286858
>>30286866
Thanks fellas


Worth it to get one of those badass wooden soviet crates to hold the little 20 round boxes?

>>30286858
Anyone who says Tula is better than Wolf is a fucking moron.

It is autistic to clean the dust and rust off the springs of my new steel mags?

File: aksmall.jpg (131KB, 800x600px) Image search: [Google]

131KB, 800x600px

Where's the anon with the green plastic furniture? I fucking love that one. Also the plum is sweet too.

/akg/, I need your help. I'm thinking of saving up and buying my first non .22, and I've been wanting either an AK or an SKS. My only problem is that I live in Commiefornia, and I want to know whether either of them are legal here and where I could get them.

>>30287872
Get an SKS, an AK would have to be altered with bullet button shit to be owned there, and it's just sad

>>30287872
for cali id say the SKS is a better option. the Yugo ammo from sgammo comes on stripper clips too fyi

File: 617765_L1 (1).jpg (32KB, 1000x1000px) Image search: [Google]

32KB, 1000x1000px

is there any mechanical difference between new ak47/74's? what about saiga shotguns? Veprs?
or is everything just scaled to size?

>>30286303
Where can I find a fixed stock AK-63F?

Is there anything wrong with AMD65's? Does anyone here own one?

>>30288081
No, it's just that most have that rediculous 16" barrel instead of the long muzzle break.

>>30286303
>Posting a new thread when there's still 40+ posts in the old one
>Not linking the old thread in OP and not linking new thread in the old thread.

Stop doing this shit, faggot.
Bump the old thread until it's done.
If it's still in the catalog, it isn't "dead".

>>30288131

do the Single-Stack NPAPs only take single stack mags or do they just ship with a single stack mag?

>>30287770
The price per round goes up slightly in tins and crates sometimes, and besides novelty, the only real plus in the crate is for long term storage. But they sure are cool as fuck

>>30288216
They only take single stack mags. Otherwise they wouldn't ship it with one.

>>30287119
I'll give you about tree fiddy

>>30287157
>>30287224
Store to get a WASR?

>>30287164
Why are American made AKs boner killers for you?

>>30288737
GunwatcherDOTcom

Type in WASR and pick a store

SKS mags, which ones are shit and which ones are good?

or should I just buy stripper clips?

>>30288987
Good - the one it came with
Shit - everything else

>>30289317

yeah. I bought a metal detach mag but I don't really like it. Just gonna put the original in.

>>30288987
Don't fuck up your sks with aftermarket tapco bullshit, it's tasteless and unreliable.

>>30288672
Fucking jew, I said for a deal, not a for a price thats akin to robbery.
>>30287562
FL

>>30289455
Dam in in az or else I would take it

anyone have that image of that guy's custom ak with orange and shit and the izzy logo on the stock?

File: IMAG0857_1_1.jpg (358KB, 2618x1027px) Image search: [Google]

358KB, 2618x1027px

>>30286334
Legit Hungarians aren't cheap, and are superlative.
>inb4 grip

>>30289773
Wrong pic, whatever nice rifles

>>30288941
Because they are degenerate traps

>>30287050

this one, the ones you listed are made by century arms monkeys.

http://www.jgsales.com/yugo-zastava-npap-df-ak-style-rifle,-7.62x39,-with-underfolder-stock.-p-65089.html

Is there any real reason to not get an AK in 5.56? At least mechanically speaking.

>>30290007
>ak in 5.56

harem

So I guess it's time to buy an AK... only I know next to nothing about them.

Can a noob get a quick who's-who and what's what?

Also buying advice.

File: Beryl and Saiga.jpg (2MB, 2988x1681px) Image search: [Google]

2MB, 2988x1681px

>>30290030
>harem
Sure, why not?

>>30290065
Century blows dicks

>>30290007
something about straight walled cartridges

>>30289633
If I end up selling it, I could send it to an FFL you use. I actually just sent Ian a gun in AZ, shipped with no problems.

>>30290153
Who do you recommend? I hear WASR is the model to look for but what brand?

>>30290177
Alright that could work. Have you figured out if it's a slant back ?

>>30290200
I personally like DDI, Google them

Why does the Hungarian AK have such a weird pistol grip?

>>30289455
The tree fiddy thing is a joke. How much are you getting it for?

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30290316
I would assume like 600$.

>>30289773
elusive left-handed ak or mirrored pic?

File: AK closet.jpg (706KB, 1536x2048px) Image search: [Google]

706KB, 1536x2048px

>tfw 64 pounds of 5.45x39 arriving Tuesday

It's funny because the usual UPS delivery driver is a feisty little Mexican girl and I'm sure she's going to give me crap because it's heavy

>>30290708
What kind you get ?

>>30290245
That rules out the cheaper options :'(

>>30290724
Lacquered and sealed Wolf '5.46x39'

Good deal?

http://www.armslist.com/posts/5487505/sw-washington-rifles-for-sale-trade--custom-build-ak47

>>30290708
But is she cute?

>>30290373
Mirror I guess, I didn't intend to pick that one. Point stands Hungarian AK are God tier

>>30290864
She's your typical short fat early 40s brown person, so no

She's very nice and it's nice chitchatting with her when she delivers but she's far from attractive.

>>30290892
hungarian shill found>>30290892

File: IMAG0856.jpg (506KB, 2688x1520px) Image search: [Google]

506KB, 2688x1520px

>>30290907
Nothing to shill about, btfo my arsenal
>I'm really lazy when it comes to photographing my weapons of mass destruction

Anyone got any recs for a scope rail/mount or railed dust cover?

What is the best AK for the money? I have never owned an AK but I'm looking for the most reliable make/model in 7.62x39

File: image.jpg (945KB, 3565x1523px) Image search: [Google]

945KB, 3565x1523px

>>30291075
Slr107

>>30290851
Top kek.
>$2k for a "custom built" tRASh47
>will trade for Scar16s, Tavor, Sig, Lwrc rifles, Five seven, Daniel defense, Noveske, Deviant short action, Fal

How delusional are these kinds of people?

>>30290225
Not yet man, out on vacation atm. Will know by sunday/monday the latest.
>>30290316
>>30290355
Somewhere around $650

>>30290851
https://www.youtube.com/watch?v=Vs7eK2SmGYM
RAS47 seems a little sketchy in the long run.

>>30291184
http://www.armslist.com/posts/5387121/austin-texas-rifles-for-sale--polytech-ak-47-legend-df-with-accessories

Am i being cheated too \s

>>30286303
Link the old thread next time faggot.
>It makes it easier to go through the archives that way.

>>30257731
>>30257731

File: ivan_AK.jpg (118KB, 600x650px) Image search: [Google]

118KB, 600x650px

>>30291033

sage

>>30287082
Did you buy this or have it made?

If I want to buy an AK what brand should I buy?

>>30291317
cigur wasr

>>30288216
They only ship with single stack. Also, they usually ship with 20+ mags

>>30291244
Lol, nice find
>Austin Texas
>newsprint from Wisconsin

These Nigerians must step up their game

>>30291324

Piece of crap with a single stack bolt and no receiver dimpling.

>>30291244
not necessarily, but i certainly wouldn't send a money order

File: 9beccdf3-3dc9-4b5a-aa4e-fd3a3eb151a9.jpg (82KB, 667x1000px) Image search: [Google]

82KB, 667x1000px

Gonna dump some ak

File: poly3.jpg (497KB, 1024x664px) Image search: [Google]

497KB, 1024x664px

>>30291408
>piece of crap
compared to what? american AKs? lol
>single stack bolt
doesnt make a difference if it had a double stack bolt
>no dimples
muh aesthetics

I want an AK and I'm willing to drop no more than 1k

Whats the most reputable maker here in the states where I can buy myself a new one I can pass down to my first born?

File: 78314350-f080-405b-8a05-f92120f4f568.jpg (287KB, 1024x577px) Image search: [Google]

287KB, 1024x577px

>>30291479
Used Chinese, Maadi, Valmet or Galil

what type of metal mags are best?

what buy?
>country of origin
>price
>where can buy?

File: 04c7f1cc-97b9-4a79-9d6e-c75c82d725b4.png (355KB, 500x375px) Image search: [Google]

355KB, 500x375px

>>30291546
The ones that feed and are the cheapest. I like Croatian ones.

File: saddam-gtfo.png (111KB, 200x299px) Image search: [Google]

111KB, 200x299px

>>30291102

>>30291513
Valmets, Chinese, good maadi, good galils even used for a 1000, kek

File: b49f2b61-0a2f-439e-8f97-d7e56e48ed50.jpg (533KB, 1280x1640px) Image search: [Google]

533KB, 1280x1640px

>>30291738
Prob not valmets or Galils (or Polytech) but sometimes you'll be suprised the deals you can find some places. Norinco mak90s and Maadis can be had well under 1000

File: image.jpg (2MB, 3415x2847px) Image search: [Google]

2MB, 3415x2847px

>>30291733
Geez why so much hate?

>>30291738
idk what hes smoking, valmets and galils are not 1k. --> 1.5-2-3k

>>30286303
/r/ anyone got STANAG pepe?

>>30291774
Yeah save someone offloading a treasure who is ignorant. My buddy bought a ACC maadi and it's pretty shit desu.

File: cdda6f16-a032-4b4f-8e10-4c0a3cbe5c79.jpg (177KB, 960x528px) Image search: [Google]

177KB, 960x528px

>>30291784
Yes, on average. As I said, deals can be found if you are smart and know where to look. Stay out of gun shops and specialty forums unless you're looking for parts, mags etc

File: 5451241_01_ak_47_amd65_640.jpg (63KB, 640x1138px) Image search: [Google]

63KB, 640x1138px

>>30291847
decided to browse armslist after your post
>$1300 abortion

>>30292028
eokek in a forward position
>??

>>30286866
I actually had a FTF yesterday. Full primer punch and all....weird.

>>30290708
You should fuck her

>>30291689
>milled AK-74
Cancer

>>30291689

These always intrigued me. Do they work?

>>30287807
I second this. I will feed my WASR Wolf ammo as much as I have to (thankfully it will now eat it willingly, unlike when it was brand-new).

Tulammo just plain scares me based on the shit I hear. Robski has admitted to using it to save money and has also said it constantly causes problems for him.

>>30291781
Is it accurate? I've always wondered that about those pistols

Anybody go through the process of custom building their AK?

I don't have enough money to buy a good quality one all at once right now, so a custom build sounds like a reasonable choice for me.

Overall, does a custom build cost more or less than a recognized brand (depending on parts of course)? Is there a babby's first guide to choosing parts and such? I should be able to just order the parts to my doorstep right?

Anybody help me out through this process please?

File: New Npap.jpg (1MB, 1940x888px) Image search: [Google]

1MB, 1940x888px

What's a good grip (preferably not short / stubby) you guys recommend? Because I find the polymer grip on it currently a little un-appealing. Also is there any places to buy furniture blanks?

>>30292644
Just buy a WASR.
I know, I know. WASRs are a meme. But you will be spending more money for a probably shittier gun if you have no idea what you're doing and try to build an AK.

File: 10931251_318217425041418_3561142824820407442_n.jpg (87KB, 778x658px) Image search: [Google]

87KB, 778x658px

>>30291781

Just because the rifle was designed so that some illiterate farmer in rural Asia/Africa/Eastern Europe could use it doesn't mean it has to look like it belongs to an illiterate farmer in rural Asia/Africa/Eastern Europe.

also

>AK pistol
>bipod
why?

>>30292654
US Palm Battle Grip

>>30292654
Classic yugo grip

File: DSCN1388.jpg~original.jpg (160KB, 1024x768px) Image search: [Google]

160KB, 1024x768px

>>30292654
molot gen 1 or 2 grips feel like sex

>>30292654
>Also is there any places to buy furniture blanks?
Why would you want that?

>>30291197

and the short run and everything in between

>>30287807
Exactly. I'd take Wolf over Tula everyday of the week.

>>30292701
So I can eventually make furniture that is custom fitted for me. That and atheistic pleasure and self-fulfillment, I love making things.

>>30292690
>>30292689
Thanks.

>>30292679
Sold out for now- but I'll keep my eye on them.

(ALSO): I've got 3 Korean steels coming in (these: https://www.classicfirearms.com/30-round-ak-47-magazine-steel-rib-backed-south-korean) did I do a good? Or did I fuck up?

>>30292776
Worst Korea mags are shit. Sorry to say.

>>30292810
Could of got surplus Euro for that price.

>>30292776
Korean mags are shitty and way thinner than (Romanian, Russian, Croatian, Hungarian alternatives)
>ya goofed
http://www.apexgunparts.com/ak47-30rd-steel-magazine-7-62x39-romanian-good-to-vg.html

>>30292776
>So I can eventually make furniture that is custom fitted for me. That and atheistic pleasure and self-fulfillment, I love making things.
You don't need that unless you're a lanklet, in that case get a
rubber buttpad/extension. If your hands are too big, head over to Ironwooddesigns and get a Yugo handguard with a palmswell.

>>30292810
>>30292776
korean mags are more like hit or miss, with the bias being towards miss. good luck anon

>>30292810
>>30292843
>>30292848
Well I guess when they get here I'll be able to tell if they're shit or not. Well learn from your mistakes I guess.

>>30292847
Sure I don't *need* it but I want it.

>>30292776
South Korean steel mags are dogshit. The welds are shit, the QC is shit, and the steel they use is too thin

>>30292915
>Sure I don't *need* it but I want it.
My point is that no, there is not option and unless you have the woodworking tools it's going to look like ass.

File: 1439690412293.jpg (1MB, 2880x1408px) Image search: [Google]

1MB, 2880x1408px

Anyone interested in selling me a triangle folder stock? one that has a 4.5mm hinge pin?

>>30293114
You can get them cheap on ebay

>>30293118
link me; cheapest I could find is 120$ shipped.

>>30293125
That's about the cheapest you'll find them now. Sometimes used ones will pop up for about $65-70 plus shipping, but they're gone pretty quickly.

>>30293145
So 120 is a decent deal then? It seems like a bit much.

>>30290157
5.56 isnt straight walled

>>30292416
'no'

Why would I? My wife is infinitely more attractive

>>30293185
Then buy a Taiwanese one if price is a concern.

>>30293266
>>30293145
Just snagged a Russian one for 90$

>>30290200
Wasr is a brand of ak that century imports and sells. Other importers like m+m sell their own version under a different name

>>30288737
Most gun store owners have at least one supplier that can send in WASRs. Just ask the store owner.

>>30293266
The Taiwanese ones are actually more expensive

>>30293224
Why not both?

File: hqdefault.jpg (25KB, 480x360px) Image search: [Google]

25KB, 480x360px

Do they make AK47 kits?

>>30293456
There are parts kits but it's not like an AR-15 where you can just assemble it with a wrench, and some punches. It's a tool and skill intensive process.

>>30293387
Because she's physically repulsive and probably smells like perpetual Mexican bean farts and that's gross

>>30293456
You'd know if you lurked more faggot

File: absolute shit.png (2MB, 1204x1524px) Image search: [Google]

2MB, 1204x1524px

>>30293568
>probably smells like perpetual Mexican bean farts
Why am I so erect?

File: AK fireplace.jpg (538KB, 1632x960px) Image search: [Google]

538KB, 1632x960px

How much should I expect to pay for a Soviet faceted 74 brake? I've got a guy emailing me pics of one he might sell but I'd like to have a general idea of how much they sell for. I'm assuming $100-$125 ish? Honestly I'm not sure. I don't want to be a sucker and accept whatever price he gives me but I also don't want to be a jerk and give him a super lowball offer based on my ignorance.

>>30293633
>>>/d/ fampai

First time buyer here. Trying to make a choice but genuinely curious as to why theres a lot of distaste for american made AK's.

Very uneducated on long rifles in general, but I was just browsing the catalog at the kalashnikov usa website and really liked to look of the classic wood model. Whats the issue so I can make an informed decision.
Thanks in advance

>>30293686
>genuinely curious as to why theres a lot of distaste for american made AK's.
The only two brands that are out there have cast bolts and trunnions, which is not okay.

>>30293686
AKs are a little more labor intensive to build than ARs at non gov't factory scale levels. Smaller companies cut corners to keep costs down and the result is shit rifles.

Some other things at play too, but thats the quick and simple

>>30293699
Pls tell me why! I'm just a shotgun and revolver guy and I have Zero knowledge with rifles or the deep intricacies with guns in general.

>>30293723
Cast can be as good as forged, but needs high attention paid to QA/QC procedures. The companies at hand do not have those procedures even on the basic stuff.

File: received_1601691733474635.jpg (22KB, 640x480px) Image search: [Google]

22KB, 640x480px

>>30286303
Are the Polish Tantal 74s good? Does anyone still sell them? Any other good sub 1k 74s?

>>30293736
>Are the Polish Tantal 74s good?
Tantals are great, Century's Tantal builds are very hit or miss like the vast majority of Century's builds.
>Does anyone still sell them?
No, you're going to have to either buy used or have someone build you a kit
>Any other good sub 1k 74s?
No, just save an extra $200 for an SLR104 which is the best 74 on the market for the money.

>>30293723
Think of it like this.
>you have liquid metal
>you put it in a mold
>it cool down
Now molecularly, you don't have the same density and strength/structure to the material. Even when you heat treat it, it will have a weaker structure. The alternative is usually a bolt and trunnion milled from a billet of steel or a forged billet of steel, you have denser and structurally stronger material that is less likely to have microfractures or wear unnecessarily quick.

>>30293766
Got it. Thanks anon

File: photo_1465847687756.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

>>30287104
AK Khyber pass kits from AKbuilder.com
>>30291300
I bought the parts and had a gunsmith build it

>>30293615
sorry brah I'm strapped for cash. Being on here just makes me want to buy guns and I can only afford 1 or 2.

I think the AK is mechanically superior to the AR but I'm worried about scarcity of ammo and replacement parts in the US if shit ever hit the fan. The AR is much more accurate from what I've seen.

I'd like to have both.

>>30293805
Btw, when we say "American made" that usually refers to 100% American made guns. Guns that are professional built off of parts kits (demilled military AK's) are fine as are rifles that come in as sporters and get de-sporterized.

>>30293853
>I'd like to have both.

Get both, they are very different animals to dick around with at the range.

>>30293853
>sorry brah I'm strapped for cash. Being on here just makes me want to buy guns and I can only afford 1 or 2.
Just get a WASR or N-PAP for $550-650
>I think the AK is mechanically superior to the AR
Not really.
>but I'm worried about scarcity of ammo and replacement parts in the US if shit ever hit the fan.
7.62x39 is everywhere, the only parts you have to worry about wearing out under 20,000+ rounds might be the springs, the firing pin, and *possibly* the bolt.
>The AR is much more accurate from what I've seen.
Marginally, a decently built AK will shoot 2-3 MOA at 100 yards and a comparable AR will shoot 1.5-2.5 MOA similarly. 7.62x39 just drops off faster, about 350-400 yards, than does 5.56x45, however people have still hit mansize targets out to 500 yards with 7.62x39.
>I'd like to have both.
That's the right mindset

>>30293736
Tantals are awesome. Buy a used Interarms one if you're looking.

How are those CAI AMD65s? They have FEG receivers, so they can't be THAT bad, right?

Or perhaps I should just go for an SLR.

>>30293945
If they have those retarded 16" barrels, pass. If they have the 12" barrel or whatever with a muzzle extension, go for it.

>>30293909
Isn't I.O., Interarms?
Are you trying to fuck with me?

>>30294015
no I.O. stands for InterOrdinance

>>30294015
http://www.highstandard.com/index.php/home-interarms

>>30293681
I might be pretty wrong on the price as I've found some that sold in late 2015/early 2016 for around $70. I might be confusing the prices of current 74M brakes with these as 74M brakes sell for around $100

>>30286585
GT, it's not even a close competition.

File: WP_20160428_20_18_52_Pro.jpg (1MB, 3072x1728px) Image search: [Google]

1MB, 3072x1728px

>>30293078
finland

>>30295361
Send black waffles, pls.
Will pay generously.

>>30295399
buy (10) waffles

>>30293681
if its chrome lined its prob legit

>>30295439
I have plenty of ((10))s.
Just not the same.
>Already have OD Finnish waffles, just need some black ones.

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

lads I really need some help. how can I make this even more slavaboo??

>>30296400
bakelite bayo and slav sight?

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30296400
sorry for the shitty quality picture. this one is a little better

>>30296429
I have a bayonet, but I'm not eager to drop 300-500 on a sight so I can shoot my meme gun a little better. I'm looking for the most dirty Eastern European stuff people do to personalize these guns.

File: 1439873745648.jpg (101KB, 790x800px) Image search: [Google]

101KB, 790x800px

>>30296529

>>30296573
how buy this beauty !?

>>30296573
would cop

>>30296594
Etsy

>>30296447
>>30296400
Stop trying so hard.

>>30296447
blue tap on the mag

>>30296635
the whole point is to try too hard

>>30296644
oh, right. this, how did i foreget the blue tape

>>30292678
Because it's my money and I do what I want with what I buy.

>>30291781
Because you just fucking attention whore and it's disgusting

>>30297048
Isn't that pretty much all of /k/?

>>30297071
About 10%

File: I think I dun goofed... again.jpg (63KB, 650x650px) Image search: [Google]

63KB, 650x650px

>>30292654
Alright I'm this guy and I think I really fucked up. Again. So my cobra sight just arrived and after trying to fit it I'm deducting one of two things: either I'm doing something incredibly wrong or I made another bad economic decision and it isn't compatible. Did I just fucking buy a 74 mount+optic for a fucking 47 rifle? (Yugo Npap)

>>30297225
How is it not fitting some mounts require adjustment ?

File: 100_4800.jpg (2MB, 2832x2128px) Image search: [Google]

2MB, 2832x2128px

>>30297312
It seems to not be sliding all the way forward- it will get half way then stop due to a protrusion near the rear of the optic mount. It mounts and stays on but not in the best way... like pic related (will get pic when I find camera)

>>30297104
I'd up that estimate to 40%

>>30297380
It looks like you have a different style of mount I'm not familiar with. Did you put it on yourself ?
Tho they should all be universal as long as it's a ak mount not svd

>>30296400
>slavaboo
>romanian ak

You dont.

>>30297380
>>30297225
It's not because it's a "47 rifle", it's because it's a yugo you stupid fucking nigger. Yugo's have special side mounts

Arsenal 106 Y/N?

I've heard of problems with .223 AKs in the past, and something about the straight gas tube being better, but it's been a while and I don't remember.

File: saiga2.jpg (1MB, 2304x1386px) Image search: [Google]

1MB, 2304x1386px

I used a real camera this time

I am very undecided on my first AK. I don't know whether to get a 74 or 47. It more than likely will be an Arsenal brand AK, that much I'm more or less certain about. So /akg/, which one is better for my first?

>>30297796
get a 47

>>30297796
Get a slr107. I'm a huge fan of 5.45 but for a first ak 7.62 is far better to learn with.

>>30297834
*7.62x39

>>30297796
7.62 especially in this political environment. Then if you have a 5.56 AR or equivalent, a 5.45 74.

>>30297766
So fudd I actually kinda like it in a way

>>30297380
Google ZRAK rail / scope

>>30286303

Opinions on DDI AK-74s? I've heard conflicting reports of their quality, some good some bad. Might just settle for a WASR-10. Also, what are some good sites to order AKs to your local FFL? I've mainly been browsing Atlantic and ClassicFirearms.

>>30297766
All I can see is an AK mag

>>30295361
why do you own german labeled products then

File: pic25878.jpg (104KB, 950x633px) Image search: [Google]

104KB, 950x633px

>>30286303
7,62 mm AKS-47 (516.33EUR)
Here in Bulgaria .

>>30297766
>>30297979
If there was every a reason to splurge on a OD green ((10)) this is it right here

>please do this and post pictures

>>30297480
>>30297590
>>30297926
Alright I found out the problem, I just need to file a little 5mmx6mm notch at the rear portion to allow it to slide forwards completely. So- the sight should work fine. Sorry for wasting your time because I was having a little panic attack over spending $400 on an optic that wasn't compatible.

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30298087
Figured that all you needed. Good luck sighting that in.
>nice opap btw I kinda miss mine

>>30292644
AKs don't snap together like Lego's or ARs, so the money you'd save by buying a parts kit is lost on the variety of tools needed to properly build one.

>>30292644
Lurk more you cancerous piece of this. This question has LITERALLY been address in this thread.

>>30293224
Post pictures of your wife

>>30297935
Gallery of Guns

>>30298081
OD ((10)), huh... any idea where an anon could find such a thing?

File: BulgarianColoredWaffles.gif (111KB, 800x271px) Image search: [Google]

111KB, 800x271px

>>30299415
They're around. Midway used to sell them for really cheap when nobody wanted them.

There's one on the joker for *cough ohl shit* $150

>>30299415
http://www.akfiles.com/forums/showthread.php?t=267636

Another 115, I think you could get one for like $80 desu

>>30299701
>paying that much
oh shi-

Maybe I'll just try some OD paint. Thanks bro. Love those clear mags. Too bad the Polish clear mags supposedly suck.

>>30299789
Supposedly? No they do fucking suck.

>>30299951
I haven't bothered to watch a torture test. Really, I see a lot of "x totally sucks" when it's only relatively shitty compared to top of the line. But maybe they really are garbage. This isn't exactly a hill worth dying on.

Who makes better AKM barrels, Poland or Romania?

>>30293723
>>30293735

It's the similar thing on the auto world. Forged internals (pistons, rods, crankshaft) are used in high performance street cars and race cars. They're expensive as hell compared cast parts, but they are not only stronger, they are more resistant to heat warping due to hard driving.

Cast parts would crack in a racing engine while forged internals could outlast a cast iron block block.

File: Bestfriends.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

Who idort here?

>>30300940
Adam Lanza go

File: StockCleaningKit 03.jpg (26KB, 900x541px) Image search: [Google]

26KB, 900x541px

is there some magical trick to opening this fucking thing i can't comprehend because im not slav enough? or is the cap on mine just so insanely tight that i cant open it with 1 player in each hand trying to get it to budge

>>30301144
Lol
>rifle made for illiterate conscript army
>AR fags looking for the 1-800 customer service number

File: _IMG1528-1-3.jpg (2MB, 2900x2900px) Image search: [Google]

2MB, 2900x2900px

GUIZ IDS DIS DA AK THRED?

>>30301169
i'm about to crack the fucking thing open with a boltcutter

i don't own an AR if that will keep the shitposting down

>>30301144
>>30301190
Jesus fucking christ.

Step one: grab cap in hand.

Step two, pull on the end.

If step two failed, twist the cap until it moves slightly, then pull again.

its not that fucking hard you retard. its not screwed on. you see that L shape in the Bottom peice of your pic? thats the locking system for the capsule. its got two rivets on the cap that slot in there then twist to keep it shut.

>>30301121
It's not a shrubmaster though, it's my little armalite
https://www.youtube.com/watch?v=nHY14OVk7r0

>>30301190
>breaking something you paid for that made made to be usable by illiterate Siberian monkeys

>>30301190
Whats so important inside the cleaning kit that you need so badly? It's just a screw driver bit, a punch and some other shit

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Just picked up an a like new Arsenal sgl20 with 5 mags for 680 bucks, this is my second ak as my first was a wasr. Did I do good?

>>30301236
>twist it and pull it
gee that's some common sense shit right there wish i thought of it - thing is clearly sealed with finish or something, the cap does not move period, any direction. I have it in a fucking vice with plyers on the cap.

just needed confirmation that i wasnt too retarded to unscrew a cap. i dont obsess on russian shit so if they unscrewed caps the opposite way it'd be news to me.

>>30301353
>>Did I do good?
>implying you don't know that you did good and you aren't posting this here to show off the deal you got
Not as desirable as a 21 but that's still an awesome deal, are the five mags circle 10's?

File: image.gif (1MB, 320x213px) Image search: [Google]

1MB, 320x213px

>>30301630
I literally have no idea that I did, how much do they usually go for? And no just 1 circle 10 mag, a pmag, 2 Romanian steels and a 40 round steel mag. Any help on what that muzzle device on it is?

>>30301665
Yeah, it's a really good deal, you could probably sell it for a quick $850, more if you're willing to wait.

20's are slightly less desirable than 21's because the gas block doesn't have the accessory lug and the FSB is Bulgarian instead of Russian. So, effectively no difference, unless you have a grenade launcher you were planning on mounting.

That's just a muzzle nut, it's simply there to protect the threads, it doesn't do anything. Find a 7.62 AK-74 style muzzle brake and replace it. If you can't get it to screw off, then it's probably welded in place and you got one of the ban-compliant SGLs, in which case there's probably a small weld somewhere which needs to be broken.

>>30301735
Awesome, thanks for all the info. Thank god the muzzle device isn't welded haha, I'm going to replace it with a 74 style brake, any suggestions on one or if there's a better one for the money?

Requesting pics of those Russian guys in black hoodies
(posting here cause they had ak 74's)

>>30301837
You could get the Arsenal one, they're very well made but they're $100. The cheapest way would be to buy a Bulgarian AK-74 brake and drill it out with enough clearance for 7.62.

>>30298214
No, not on this Chinese Cartoon website

>>30298004
>why do you own german labeled products then

Why the fuck does shit I buy in the US have spanish and french on it?

File: image.jpg (562KB, 2048x2048px) Image search: [Google]

562KB, 2048x2048px

>>30301915
Gotcha, thanks Chimps!

>>30290954
Hnnnnnngggggg

>>30292690
Can confirm. When i played with chimps SLR107 at a meet up, it felt amazing. Much better than anything toss I've held before

>>30293681
>>30294154
PLS /k/ HE'S ASKING ME TO GIVE HIM AN OFFER

>>30301915
CNC warrior also makes ak-74 style brakes, if you want an economy option.

5.45x39 mags should cost less.

>>30302307
>~$30 for a solid surplus mag
>Expensive

>>30302326
I won't be happy until they cost at most as much as AKM mags.

>>30302307
>>30302341

(You)

>>30302341
They never will.

>>30302396
Not with that attitude.

When will slab side 103 mags start to be more common.
>Want

>>30302415
Soon actually, expect to see them cropping up soon

File: pix610497487.jpg (73KB, 640x480px) Image search: [Google]

73KB, 640x480px

Weird, I didn't know Russia made 5.56 bakelites...

>>30302659
>soon
Are we talking days, weeks, months? And where at?

>>30302888
Never mind, I read the backstory on them
>kek century

Guys I was planning on getting an N-PAP underfolder to add to my poorfag collection (just a mosin atm, i'm 18)
In MN does the N-PAP classify as "military style assault rifle"? I don't know if I need the special license or not.

File: 20160616_213415.jpg (1MB, 2048x1152px) Image search: [Google]

1MB, 2048x1152px

>>30303118
Don't get under-folder. Uncomfortable, nice and compact when you want to put it away, but very uncomfortable to shoot. Also no you don't need any special licence besides maybe a driver's licence depending on where you hail from.

>>30303185
Thanks for the advice, turns out the normal stock is cheaper too.

File: eiasIkO.jpg (318KB, 1836x3264px) Image search: [Google]

318KB, 1836x3264px

My emergency ammo came in the mail today.

I almost want to open it, but I'm not gonna.

>>30302927
Expect to see them in increasing frequency in 2016. They've been popping up from multiple sources in quantity lately.

So lads, I'm selling my vz2008 and I'm going to put the money towards an rpk build
> $375 for mix master yugo m72 parts kit
>~$400 for jbi build (receiver included)
All I need is a barrel. Are all the surplus yugo take-offs sewer pipes at this point? Or can I get something cheaper than $250?

>>30300065
The Polish clear plastic magazines don't have steel feed lips. They will break.

Unless you want it for the novelty and you have plenty of better magazines that you don't want to wear out, then don't get them.

>>30303233
Wolf? How much are those cans?

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>30303269
No plums yet ?

>>30303373
It's Tulammo. I got it from Luckygunner for about 180 dollars including shipping.

>>30303499
Not yet. They cleared Russian customs but they haven't been shipped yet. The supplier said not to worry, they were larger than the other package

>>30303843
Thanks for the reply, I don't want to bug you.
>way to fucking excited for the mags

Whats the best AK pistol to use as a truck gun? Smallest I can get without sacrificing build quality/reliability. It's going to be sitting between driver seat/middle console

>>30304038
Draco pistol or m92
Tho m92 will have better sights for closer engagements

>>30299701

How cheap?


I payed $8 a piece for about 70 bulgarian waffles .

>>30303233

>Tula crap

File: UBxhtzo.png (101KB, 500x366px) Image search: [Google]

101KB, 500x366px

all i can find is a quad rail slr107 for 1199 online, am i too late guys

>>30304171
You might be fucked for now, I could not find any either

Is an AMD-65 as good of a budget AK as a WASR? Most of the reviews of the AMD that I've seen seem positive.

>>30305189
Nope. Most are part kits assembled by monkeys.

>>30303185
What about the 'pap slap' with the wooden stock? Is it really bad? Is it difficult to change the special snowflake stock on the pap?

>>30304171
Just go 104 nerd

Sorry for newfag
What the fuck do I do to buy a good AK
I google about it, and I get the same 10 links, but I want to make sure that I'm getting something I can really use.

File: 20160616_213525.jpg (859KB, 2048x1152px) Image search: [Google]

859KB, 2048x1152px

>>30305407
The Pap slap isn't nearly as bad as people make it out to be- but then again this is one of the new-er production Npaps so it probably has a few problems fixed that the Npaps before it had. Not really that difficult at all (unless I'm misunderstanding the question) after popping the butt-stock plate out it's just using a ratchet to remove the long bolt from the stock that connects to the receiver and bam, just wiggle the stock out and you're golden.

(If I'm a little hard to follow I'm not really operating at 100% right now. Sleep's been rough as fuck)

>>30305828
Nah m8, u understood me

File: DATAMMODOE.png (70KB, 2160x264px) Image search: [Google]

70KB, 2160x264px

i may have succumbed to the panic.

i also bought some mags, not pictured..

File: PhotoPictureResizer_160611_193022594-800x450.jpg (72KB, 800x450px) Image search: [Google]

72KB, 800x450px

>>30297684
I have one. I love it, it's my go-to rifle. Very accurate, very reliable. Akfiles has a few threads about them, the unreliable ones seem to be some of the early ones with certain serial prefixes. A lot of them had feeding issues simply because the feed ramps weren't there or big enough on the breach face. Magazines are a bit pricy but most are of good quality, esp Bulgarian Circle 10.

>>30306347
I want your stock.

File: IMG_1352.jpg (3MB, 2592x1944px) Image search: [Google]

3MB, 2592x1944px

>>30303499
What's the difference in quality again between Tula and Iz? I have a few 5.56 guides I'm determined to make work and ordered a Tula plum to try out. My Beryls still aren't in from Poland :'(

File: 4561b2dc-37e0-442a-87fc-6fe27db48154.jpg (746KB, 1280x1734px) Image search: [Google]

746KB, 1280x1734px

>>30306391
Ill keep an eye out for one for you on the files and local. If i see one ill hit you up on fb.

>>30306399
If I recall there is not much of a difference, Tulas go for more because of the star imo.
>I am no expert tho

>>30306413
Thanks man I really want one now that I have the fixed stock on the Saiga

File: Beryl and AR.jpg (2MB, 1681x2988px) Image search: [Google]

2MB, 1681x2988px

>>30306399
>my beryls still aren't in from Poland
RIP. I'm currently waiting for a Polish pistol grip to come in for mine.

File: photo_zps19d3c4c3.jpg (21KB, 480x227px) Image search: [Google]

21KB, 480x227px

>>30306437
Bro... Wood triangle on the Saiga! I need another AK just to put this stock on....

File: 12fc01d0-3a1a-45a5-a5e7-89e4255d4a61.png (277KB, 500x498px) Image search: [Google]

277KB, 500x498px

>>30306438
Same guy? Kruk? xxfencexx?

>>30306483
>Don't we all... Lol
Fuck I want another 74 I wish I could find a decent tantal

File: saiga_plum.jpg (3MB, 2988x1681px) Image search: [Google]

3MB, 2988x1681px

>>30306490
I have no idea what you're asking.

File: bd0199f7-8b52-4054-9aba-fc8e99fe3170.gif (2MB, 340x139px) Image search: [Google]

2MB, 340x139px

>>30306438
Also, I want your rifle. Fuck man... Tell about it. How do you like it? How much did you pay? I want a new fancy ak from the Radom factory.

File: 34838d64-6157-4f02-a7ac-f84669905b86.jpg (386KB, 1280x853px) Image search: [Google]

386KB, 1280x853px

>>30306507
I assumed you were getting your parts from the polish guy on akfiles. That's where I ordered the mags from. Fence is his name on there.

File: 1466132447515s.jpg (3KB, 124x125px) Image search: [Google]

3KB, 124x125px

>>30302415

They are banned from import legally, individuals illegally buying them from overseas will slowly allow them to show up.

>>30291102
Does that function well with a slant brake? I thought you needed a booster at that length.

File: 1431116737001.jpg (10KB, 240x231px) Image search: [Google]

10KB, 240x231px

>>30306483

>wood triangle folder

why have I never thought of this?

>>30306399

Tula was a smaller plant the general premium is slightly more on tula vs izhmash, Tula bakes are more uncommon the izhmash ones.

File: Beryl.jpg (4MB, 5259x2959px) Image search: [Google]

4MB, 5259x2959px

>>30306509
I love it. I only paid about $750 for it. FB Radom is trying to import more beryls but the ATF is fucking them over.

>>30306518
Nah I just got it from robertrtg since I also ordered a port buffer for my PTR. I did get a beryl mag from some website that I can't remember at the moment.

>>30293456
Palmetto had pre barreled receivers so that one of the harder parts would be done. But they have been out of stock for a long time and I never talked to anyone who used them.

File: 00c83f13-31a5-4652-b849-ef957eabb4a4.jpg (86KB, 1024x768px) Image search: [Google]

86KB, 1024x768px

>>30306556
Lucky bastard. I really need one in my life. I'm considering selling my WASR and something else and then try to hunt one down.

>>30306533
I know some guy who apparently gets parts in Russia on the regular. Maybe he can get a few. What are they worth at the moment?

New thread

>>30306588

>>30306588

>>30306588

>>30296625
Link pls

>>30303118
You need a permit to purchase, basically a redundant background check that's good for infinite gun purchases till it expires.