DYEL edition
Old >>34607150
>>34610370
Needs surefire Z70 rail covers
>>34610370
Last new thread was pwned.
>>34610370
This one gonna get deleted?
>>34610387
What happened? I just got home and found dead
pls gib keymod sl-k rifle meme
>>34610403
Couldn't say. Nothing obvious happened.
>>34610392
Yes
>>34610370
rifle should be getting thinner toward the end, not thiccer
get a g rail and try again
also whats up with people using these ugly ass a2 pistol grips
>>34610425
Yay
Rip old thread.
>>34610433
A2 is gay
>>34610018
The is no "extra fine" 6-32. It is a #6 machine screw (approx .13 inches) with 32 threads per inch. I believe that a finer thread #6 is 6-40, the easy way to tell if the pitch (threads per inch) is different is by holding the two screw next to each other, pic related.
It looks to me like the two silver screws in your pic might be different from the black ones, but I can't tell for sure
>>34610422
>flashlight is most expensive part of entire rifle
i'm falling asleep here mane, build a rifle that arouses me
>>34610370
https://www.youtube.com/watch?v=kijpcUv-b8M
>>34610463
Actually the optic was. $550 for the scope. Another $210 for the mount.
Does anyone make a cold hammer forged barrel with qpq and no chrome lining?
>>34610370
>have UBR
>put it on a 16" AR
>16" AR now weighs more than my 20" AR with a loaded mag
neat
>>34610564
what makes ubr so heavy? I don't get it
>>34610577
The weight
>>34610586
>>34610577
>>34610564
Gen 2 isnt bad at all
>>34610576
You made some good choices overall
>captcha is dolan meme
>>34610559
yes
>>34610603
It'd look better with a KAC FF RAS
>>34610422
How do you like your stock? I'm thinking of getting one to replace my CTR.
Is this legit?
http://www.ebay.com/itm/KAC-Knights-Armament-Back-up-Iron-Sight-BUIS-Rear-Flip-Sight-Authentic/332304639639?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
>>34610603
Stop lying to FA
>>34610577
Take your buffer tube, add a metal sleeve to it that the 'stock' and cheek rest attach to, then have another piece of metal in the 'stock' that interfaces with the sleeve on the buffer tube. Then top it off with a complex latching mechanism.
>>34610623
yes
>>34610627
Post AR
>>34610623
I'm gonna buy that
>>34610623
The picture is
>>34610622
I like it so much I bought a second one.
>>34610642
Here's a R
>>34610623
I bought 4 from that seller, two were the normal "usmc" markings and the other 2 looked like it had been laser etched instead
>>34610676
there's a bunch of fakes out there now, using convincing airsoft clones that they then etch the USMC onto.
>>34610676
Lel. Made in China airsoft confirmed.
Are PSA full uppers the way to go if I want to get a basic, cheap midlength AR?
>>34610676
post pics
>>34610605
Who?
r8
>>34610732
6/10
>>34610708
>>34610710
Welp, rip me.
>>34610726
I don't have them on hand atm
>>34610732
Keymod. RIP
>>34610732
10 point deduction for shelvingmod
>>34610780
>stock too bulky
>barrel still looks too long
>black peq
3/10
>>34610780
no thanks
STOP TALKING SHIT ABOUT KEYMOD. ITS SUPPORTED BY BCM AND EVERYBODY KNOWS THEY THE BEST STAHP IT REEEEEEEEEEEEEEEEEEEEEEEEEEEEE
>>34610827
Tweaker git
>>34610672
Here's three Rs
>>34610845
cool
>>34610780
>all this circlejerking just to end up back here
So we can probably just cancel /arg/ now right? Everything has been done before.
>>34610848
I didn't give you permission to respond to my post
>>34610858
Your rail covers are fucked up. Looks ugly as shit.
>>34610858
>So we can probably just cancel /arg/ now right?
please
>>34610837
>yfw even BCM abandons the shelving technology meme
How do you go from pic related to... >>34610780
JUST
>>34610876
Awful. Looked better mixed with tan
>>34610858
Has anybody actually finished a mk12 tho
>>34610904
It's a million times better than his recceshit
Finally gonna get to assemble this on saturday.
>>34610925
arg always cheaps out on the barrel
Guys pls explain this?
>>34610834
>>34610893
is that 14.5"?
laser, ambi safety, m952v, stock and matech
>>34610904
shit taste
>>34610928
>14.5
>acog
>recce
>>34610448
Wut lazor??
>>34610925
>b-but I'm not done with my not-a-clone!
Does it matter?
Let's call it boys, /arg/ is done. We've shitposted literally everything there is to post, mission accomplished.
>>34610946
I didn't say recce, I said recceshit.
So, what style configuration would you call it? Bland and utterly forgettable is accurate, but too long to be conversational.
>>34610960
>Be me
>Inna TS
>talking with other trip fags about ricing out my glock
>Come here
>see this
>decide not to
I think I found my new clone build
>>34610960
Welcome to /arg/
Remember, your here forever
>>34610960
rip, perfect time to sell all my shit then
>>34610979
REEEEEEEEEEEEEEEEEEEEE
>>34610970
>So, what style configuration would you call it?
parts bin abortion
>Bland and utterly forgettable is accurate, but too long to be conversational.
>keeps bringing it up
>>34610982
Pfft, like hell I am.
Later fags.
>>34611012
rreeeeee vortex
>>34610979
looks fine
>>34610946
A stock image looks better than your entire setup.
>>34611009
You keep posting it for some reason, probably because even you forget what it looks like when it's not right in front of you.
>>34611024
>>34611002
wait never mind I want to do this one
>>34611026
>>34611033
brb selling all my guns
>>34611014
Want
>>34611046
this is new information how?
>>34610370
>DYEL edition
Come at me.
>it's even heaver now with a quad rail
>>34610929
Wrong mount bro. Get the Delta.
>>34611046
I mean, that is what you do every other month.
>>34611061
In its current config.
>>34611057
selling everything for good, dropping trip, moving to new zealand
if a noguns anon doesnt have the same taste as me whats the fucking point
>>34611034
>bare threads
>short barrel
>a1 upper
my god I thought I couldn't ree this hard
>>34611009
Rekt
>>34611033
Damn deadly return fire.
>>34611062
Dont really care about mounts. Ill just use wharever garbage is on my k16i right now.
>>34611070
>blindly follows whatever qb is doing
>>34611086
Cambodia is a wonderful place
Is it worth it to part together an A1 clone or just settle on a used SP1? Is it worth it to buy another 20" AR when I've already got an A4?
>>34611073
No thanks
>>34611105
Where's QB's XM again?
>>34611109
>Is it worth it to part together an A1 clone
No.
why is anon rekting psi
pls guys b nice
>>34611113
wheres yours
>>34611080
But it genuinely looks like shit. You managed to bubba a classic block 1. Horrible tastes. You should honor kys.
>>34611125
I wish those didn't come with those faggy plastic followers. And that the finish didn't look like utter AIDS. Oh well.
>>34611138
Imminent. ;^
Post AR.
>>34611140
>bubba
>>34611102
Should have spent your 401k on getting good tastes.
>>34611108
>>34611034
Do I have to dig around in the mud in Cambodia to find a handguard like one of these?
>>34611140
>block 1
Goddamn anon is spicy tonight
>>34611164
Only QD mount im into is sphur isms
And they dont make it in 30mm
Im only putting it on a 1-6, nothing serious
>>34611140
>bubba a classic block 1
>>34611166
Or just the local range. Blow a cow up with an RPG for only like $200.
>>34611169
>>34611214
>If I show my autism is superior, it somehow makes my rifle less ugly.
>>34611291
being unable to appreciate a basic bitch m4 is a sure sign of retardation
>>34611291
I don't think anyone can top your autism anon
>>34611308
Your bipod is in the wrong position
I got the iMod stock in yesterday.
It's more wobbly than I expected. That's 2011 technology for you I guess.
>>34611311
No you're retarded. Your M4 is ugly. I posted the stock M4 that looks better than yours. Somehow you managed to fuck up a basic M4 aesthetics.
>>34611311
Those has RAS and are no longer basic
>>34611371
if only you could post your rifle and teach me aesthetics
>>34611380
RAS is standard issue
>>34611316
Not forward enough?
>>34611385
Yea I misread I'll go khs now :<
>>34611401
Kms
>>34611426
No thanks tweaker
TS
Got 6' 7' and 8' steel gongs on the way. Figured it was better then having one big target. Now I just need to figure out a way to nigger rig them to a standard pvc diy stand.
Thinking of running up 4ft of pvc vertically with two T joins on either top. Run pvc between them and 2ft out either end. Screw in some hooks and hang them on chains.
>>34611486
>>34611492
HOOKS
OF THE SHEPHERD VARIETY
>>34611526
That was my original poorfag solution but I heard they bent like every other outing.
>>34611526
NO
>>34611526
https://youtu.be/DXjnC32_B4s?t=357
This is what I'm drawing inspiration from. Using the original pvc stand and just getting a light cheap upper portion specifically for steel. I don't own a welder so I go to hand them from chains and I am coming up short trying to figure out a secure sturdy way to hold a 2x4 without additional tools and pvc piping.
>>34611543
They do bend but don't break unless you hit them with .308 regularly. They are also $5.
>>34611550
Very yep
>>34611566
If you put gongs anywhere near PVC, the PVC is going to get annihilated by spall in a handful of shots.
>>34611581
You mean spalding.
>>34611501
>
i like this, cant tell if sbr or not, ive got a tingling goin on
>>34611598
its an sbr
>>34611581
Any clever way to attach them so the hook is as least to a side instead of directly behind? That dude welded a bolt horizontally so it could swing but wouldn't twist. I feel like if I use chains and hook to a single point the wind is going to spin them. High wind ruined my range trip just yesterday.
>>34611263
What's the story behind this picture again?
>>34611492
That's gonna get destroyed.
>>34611652
... ok exactly how destroyed? I mean 10ft of pvc is literally $4 so if a piece gets completely split it is very cheap to fix. Would the spalling just completely fucking blow it to piece after a few dozen rounds or we talking gradual wear down and pock marks?
>>34611614
Wind won't spin gongs.
>>34610780
>still doesn't shoot his guns
For fucks sake
>>34611686
>Would the spalling just completely fucking blow it to piece after a few dozen rounds
Yes. Ask me how I know.
>>34611692
It is some pretty serious wind. 40mph gusts are common here.
>>34611705
How do you know? What is the safe distance between target and pvc? Could I still use that base and use wood as the brace the targets directly connect to?
Sup guys
>>34611708
It won't spin gongs if you're using 3/8s AR500
>>34611614
You can just use a single chain link, S-hook or chain coupler attached to the gong, giving you a mounting hole 90 degrees off.
No normal wind will not move a small gong and strong wind will not move a 10" or larger gong.
/arg/ still hasn't touched HK rifles
>>34611726
hi nigger
>>34611686
>>34611722
bring a shovel or a heavy blanket of some sort to lay over the pipes at the base?
>>34611752
>that stock
Who would want to?
>>34611752
I wouldn't want to touch it, don't wanna catch the uggo af
>>34610954
Zenitco Perst 4
>>34611752
Not even a Geissele HK rail can make up for the fact that HK refuses to put chrome lined barrels in the MR series.
why do u fags buy all this tacticool shit you'll never use? still playing soldier as a grown man?
>>34611722
20 ft or more, it'll still take damage but the arc of exposure is small at a distance so it will erode less quickly. Spall is no joke to soft shit. Pic related.
>>34611752
There are a couple of HKs in arg, I have made fun of them for coming with plastic dust covers.
>>34611783
Yes. Next question please?
>>34611783
post AR or git
>>34611752
>/arg/ still hasn't touched HK rifles
why bother? mid range US AR makers make better guns than HK ever will be able to make for a fraction of the price. HK=trash.
>>34611757
hi fool
>>34611783
dont lump me in with that faggot shit. post ar.
>>34611783
can we see your no nonsense ar definitely not for larping purposes?
>>34611752
>still hasn't touched HK rifles
Thought about it but I don't like pistons and LMT is better.
>>34611722
You could use that base and use furring strips to staple cardboard to.
If you want a gong hanger, try this.
http://www.xsteeltargets.com/DIY-Hybrid-Gong-Stand-p/diyhgs60.htm?gclid=CjwKCAjwqcHLBRAqEiwA-j4AyFJ8-GtCEtauzTkArbesWchlzOu16-2WRyHwjuB57Nw35raw6dxMOBoCPkIQAvD_BwE&utm_source=TPA%20On%20Google%20Shopping&utm_campaign=TPA®%20Shopping&utm_medium=cpc&utm_term=All_Products
>>34611752
been there, done that
>>34611820
that is one thicc bitch
>>34611820
We both know thats not a real HK
>>34611752
It was okay.
>>34611843
I could understand selling the Macs but why would you sell a 33?
>>34611816
>paying $45 for what is essentially 2 45 degree angle nubs and a square fitted for a 2x4
Godammit this is the cheapest way to get this kind of set up isn't it? Why the fuck do they charge so much for what is $7 in metal?
>>34611863
Because it was pretty meh and I'd much rather have had the $14,000 I got for it.
>>34611863
>msd
Is that not explanation enough?
>>34611883
Also it was a 53.
Can I say how fucking overrated FA is?
>>34611884
Literally no one likes you.
>>34611883
>>34611894
>not just sitting on it and soaking up the inflation
What the fuck duderino. You could finally shut anon up by spamming it
>>34611894
Aren't you like the 50 year old who admitted he was sexually attracted to goats and undertale gave you an outlet you've never had before and it is why everything you have is stamped by goat dad?
>>34611894
>incorrect
And you think anyone likes you?
>>34611878
If you're upset by that, you should sell your guns and ammo.
>>34611894
>>34611914
>>34611915
lot of crazy shit here.
Whats /arg/ opinion on the wolf a1
http://www.atlanticfirearms.com/component/virtuemart/shipping-accessories/wolf-a1-upper-detail.html?Itemid=0
>>34612085
Gay
>>34611816
Fuck it I bought them. I am going to spend as much if not more trying to make pvc work. Any chains will work right or do I need $55 AR500 steel chains to go with it?
>>34612136
1/4 inch or whatever.
>>34612085
awful
>>34612111
>>34612170
damn well that settles it. I just have to have one now.
>>34612195
go for it.
>>34612136
Find hooks that fit the gong
Find chain that fits the hooks
Buy 8 18 inch lengths
Buy 8 hooks
The conduit
2x4
>>34612222
>>34612136
Actually 16 inch lengths
To mount to the 2x4 you can either use bolts washers and nuts, or just stout nail at an upward angle.
>>34612246
Would a few zip ties and a chain link with screw opening work?
>>34612261
A number of things will work. Ideally you don't want the chain the slide back and forth. 6
>>34612085
Burt has one.
>>34610463
Only other AR besides mine that I've seen posted where the optic isn't mounted far back.
>>34612350
That doesn't mean anything.
IVE BECOME SO NUMB
>>34612390
Don't post another fucking pic of doggo if you don't have at LEAST a lvl III canine plate carrier
>>34612399
Fite me bch
>>34612415
>>34612390
Uggo. Where's your shitty lizards and pig?
>>34612415
You're fucking dead Michael. I'm on my way right now.
>>34612422
>>34612399
>t.ATF
>>34610409
I would sniff and lick her butt for hours
Is rail length just preference? The upper im getting comes in 12 or 15 inch.
>>34612442
You might have a case of the gay, anon. You should get that checked out.
>>34612443
bingo bango
>>34612419
Sleeping, and I don't have a pig yet. Shits like $1,100 nigger
>>34612422
I TRIED SO HARD
>>34612085
>>34612368
It's a neat novelty but I think it's a bit overpriced. You could build an upper middle tier AR upper for $600.
It's smooth shooting with Wolf Gold ammo, I haven't tried it with full power ammo.
Machining is good in most places but kind of sketchy in others. It is however a military contract upper (with a police contract gas block and US made barrel) so it has adequate providence of durability.
I noticed some wear caused by the cam pin intersecting the inside of the receiver which does not seem to have gotten worse since the first magazine, but that it happened at all is a little surprising.
tl;dr If it came with the rear sight like it was originally advertised to, $600 would be a fair but not great price. If you want a military piston upper that isn't an HK, Wolf is your huckleberry.
>>34610461
All three screws pictured are 6-32. The screw that fits in the slide is a 6-32. I tried several other 6-32 screws from the hardware store, zinc plated, stainless, black oxide, and none fit. The one that did fit was the stainless one with phillips head drive. Fucking weird.
>>34610576
AUG looks great. I wonder what it would look like with some super short sight radius MBUS pros?
>>34611071
I like this rifle. More pictures please.
>>34612473
Honestly looks cool to me. Would be interested in how long they last.
CloZee killed it. Awesome time.
>>34612473
thats bullshit that it doesn't come with rear sight. Would a normal ar rear flip even be at the same elevation?
>>34612502
I thinks so, because the wolf uppers have a taller front sight.
>>34612502
>>34612473
https://www.ecwid.com/store/t91tactical/
Des
>>34612502
Yes, all current production come with "normal" front posts now.
>>34612558
Cool!
>>34610370
>>34610370
what types of grease do yo uguys use on the barrel when it goes into the upper
>>34612767
aeroshell or whatever kind of anti-seize you want
remember to torque it to spec and loosen it 2 or 3 times to fully engage the threads
>>34612443
yep
if you're not going to need a lot of space in front of your hand, just get the 12
>>34612767
>>34612817
the armourer's manual calls for white lithium grease with molybdenum in it. don;t get anything with graphite in it
>>34612390
So has the lead singer since he's dead.
Think I covered everything so far. 2/5 reloads done. Two non-empty's left to go, and one "violent" reload.
Any details missing? Kinda trying to go HAM with this set since I love the model so much.
>>34613191
What game or project is this and when is the expected release date?
>>34613216
I was contracted for it, not sure what the title is or when it'll be out. I was only given an internal title of "Tactical FPS" and a list of tasks to do for it.
>>34612443
>Is rail length just preference?
No. If you're getting a lw spaghetti barrel because you're a weight weenie, go 15" and spare us having to look at a gun that doesn't even lift
KAC 600m or Matech?
>>34613495
KAC
>>34610370
What barrel profile did you go with? You mentioned that the URX 3.1 is heavy, but it really doesn't seem to be so. And it's only 0.5 oz heavier than a mk8. I'm sure that UBR doesn't help though.
>>34613495
KAC or MBUS Pro, I probably wouldn't use the MaTech for anything but a clone.
>>34613805
What the fuck is that rail?
>>34613834
A shitty one.
Good morning /arg/. Happy Friday!!! Don't know about ya'll but I'm ready for this week to be over with. My SOPMOD stock, ADM QD for my light and TD vertical grip are arriving in a matter of hours, so I got that going for me which is nice. I plan to get a kiddie pool for the pupper to chill in this weekend, takes some gun pics, finish that fucking office floor, drink some rum and try to wind down a bit.
>>34613834
KAC URX 3.1
>>34613805
Thanks
And why the rails at the back of URX? What would you use them for?
>>34613851
Hi there Caliper Anon, Happy Friday to you too <3
>>34613849
>I don't like that it has rail slots in the rear so that automatically makes it shitty
Anon pls
>>34613862
>What would you use them for?
Nothing, they're fucking useless.
>>34613851
>>34613862
sure is leddit in here
>>34613882
Happy Friday to you too Anon.
>>34613862
I'm probably going to use it for a CQD forward sling mount just because I can, instead of using the qd mount.
>>34613873
I enjoy how upset these rail slots make you
>>34613885
>matech rear sight
No thanks
>>34613882
Good morning anon!
>>34613895
>Match HBAR
Post moar plz.
>>34613922
Aye gurl, wut dat bbl do?
>>34613933
Let's just say he's lucky it doesn't have a front bead sight
>>34613922
>>34613933
>>34613944
those integers
>>34613947
Where the fuck did all these new trips come from?
>>34613960
Its the summer so everyone is out of school so they can shit post their parents guns.
>>34613960
leddit
>>34613981
I came from 9gag.
>>34613981
Funnyjunk*
>>34613981
i'm from tumblr
>>34613981
MySpace here.
>>34610946
hngggg
Don't listen to anon, that's a sexy M4
>>34614298
>>34610946
severe lack of SOCOM
>>34614298
>anon
>devoid of taste
color me surprised
Anons, i need advice on making my rifle lighter. I have a ddm4v5 so I definitely need to replace the handguard. I kind of like the stock and grip, but if theres something lighter ill take a look. Right now I have a geissele scope mount and a trijicon i had on another gun on it. Purpose of the rifle is backyard plinker on my 9 acre property.
>>34614417
get a BCM ELW barrel
>>34614450
that's not nice
>>34610780
I like your style
>>34614470
I need M68 CCO now
>>34614463
I want an ATPIAL but that'll probably come after I finish my next build and get a can.
Also thinking about turning the lower I have into an A4 clone so a laser with no NODs just doesn't pique my interest at the moment. I do want one for shit posting though.
>>34614501
Post ARs fgt.
>>34614513
MSD pls go
>>34614516
*bleats*
>>34614513
Put your trip back on GC
>>34614543
>lightly used
>severely illegal
rip woofer
>>34614573
Its photoshopped and nothing is illegal on it summer fag
>>34614577
>args #1 shitposter calling out a summerfag for shitposting
what a time to be alive
>>34614594
>anon is both #1 shitposter and a summerfag
Pottery.
>>34610972
>talking about ricing glocks
>im not present
you fuckin up and you know it
>>34614769
Show your riced out glock
>>34614788
Inforce Gen3 or TLR1HL?
>>34614298
>>34614410
>trips backing each other up and sucking each other's dick
Truth be told, the T1 m4 is much more tasteful than the all black one.
>>34614573
>shooped
>illegal
What's the best way to go about creating a trust? I'd like to get one set up rather than file as an individual?
>>34614838
Why not something nice?
>>34614899
>best
Lawyer
>cheap
One shot trust
>>34614917
I'm kind of leaning towards having a lawyer do it.
>>34614929
I just self file
quick question, is staking a castle nut really necessary? Mine didn't come staked, and now im paranoid if some really unlikely scenario would occur that my nut (lol) would come loose in a combat situation. Is there any good videos on how to do it properly or should i take it to the local smith. Im gonna fuck it up.
>>34615052
No, I'd like to add my girlfriend and also my dad
>>34615077
They going to be using them without you being anywhere nearby?
>>34615077
forgot trip
>>34615085
I live with my girlfriend, I plan marrying her. Also yeah, I'd like to be allowed to share NFA stuff with my dad and make transfers to one of them easily if something should happen to me or him.
>>34615102
Then go trust.
>>34615102
I was thinking of doing the same but the gf doesnt shoot without me and my dad isnt really into ARs so I think im just going to file individual to start
>>34615200
>psi
>gf
Need pics
>>34615211
how new are you
>>34615200
My dad doesn't really shoot ARs but I also want to buy him a .22 suppressor and if I were going out of town or the country for an extended period of time, they could be moved to his house in his safe. Plus if something were to happen to me, they wouldn't just wind up in some locker room without hoops to jump through from my dad or gf to get them back.
But individual does sound way easier and I could get that done this weekend. Is it pretty easy to move a NFA item into a trust after it's already been filed as an individual? Would you then have to go through a transfer process? I'd also rather have the trusts name engraved on it than my own.
>>34614906
>>34614912
Too expensive.
I posted about this last night after someone asked about a potential ebay scam, can anyone tell if this is legit or not? It came sealed in the plastic bag.
>>34615380
Yes its legit
>>34615380
That USMC doesnt look right, the letters sbould be taller
>>34615291
Its just $200
>>34615430
There is 2 different versions of the usmc on KAC sights. The one anon has is legit.
>>34615430
Yours has stampings above the USMC logo as well and his does not.
>>34615380
engraving doesn't look correct
>>34615434
Fair enough I suppose, the packaging is correct.
>>34610642
Dude how heavy is your gun?
>>34615466
DYEL EDITION SHITLORD
>>34615434
>>34615420
Thanks, I ordered 4 and two had the laser etched engraving and two looked like >>34615430
>>34615486
>shelfmod
What KAC color best matches the LMT FDE SOPMOD stock?
Taupe, FDE, or Tan?
>>34615494
Say that to his face not online
>>34615242
i think you have to do another form and pay them 200 to transfer but I'm not positive
>>34615501
what are you looking at
>>34615512
>i think you have to do another form and pay them 200 to transfer but I'm not positive
ree
>>34615512
URX panel kits
>>34615501
RAL 9000
>>34615525
Its another $200, but you keep possession during it.
>>34615200
Unless you have plans for a bunch of nfa just do individual. ATF hates trusts and will probably screw with them again. If it has your name on the stamp they can't argue you don't actually own the item.
Where is burto when we need a new thread?
>>34615525
its hard to tell, they look different in every pic i find. probably taupe or fde, tan looks light.
order all 3 and send back the two that dont match well :^
NEW
>>34615578
>>34615565
Wendys
Does anyone have any experience with BSA 1-4x24mm scopes? I'm considering getting one to see if I like the 1-4x scope concept before purchasing a more expensive optic.
>>34615501
Id guess FDE, KAC Taupe is closer to most brands' coyote
>>34615585
mcfucking kill yourself
>>34615602
>>34615602
>>34615602
Selling for $500
Why don't white people walk on sidewalks? There's a perfectly clean sidewalk for walking but white people seem to want to walk on the street and then when you honk at them because there's two large Vehicles going in opposite directions and barely enough room for them they get upset as if they're in the right walk on the sidewalk that's what it's for it's for walking on the side of the street sidewalk it's pretty simple I think white people are becoming retarded