Operating System
Windows 7 Home Premium 64-bit SP1
CPU
AMD FX-4350
Vishera 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 668MHz
Motherboard
ASUSTeK COMPUTER INC. SABERTOOTH 990FX R2.0 (Socket 942)
Graphics
VG248 (1920x1080@120Hz)
ASUS VS228 (1080x1920@60Hz)
2047MB NVIDIA GeForce GTX 1060 6GB (EVGA)
Storage
238GB Samsung SSD 840 PRO Seri SATA Disk Device (SSD)
So I upgraded my 750ti to a 1060ti and now my 2nd HDD won't show up in bios.
I didn't even fuck with the cables during the install.
I've done the following since problem.
unplugged an replugged sata cables
switch sata cables
removed an test said hdd (it works)
I had a dvd drive plugged in an it works fine so i switched the cables an still nothing.
I've googled this shit till im blue in the face.
any fucking tips/advice would be great!
>>293501
Try going on disk management and assign a letter to that drive.
>>293501
Have you tried turning it off and on again?
Sorry...
>>293501
ok uh
you're sure both sata and data connectors are plugged in?
have you tried resetting bios to default?
you're sure the drive works by itself? if so does your first drive work on the ports you're trying to use for your second?
are you SURE it's all plugged in correctly?
does it show up with the 750 back in?
>>293501
I guarantee you you have a SATA power extension/modurice PSU lead, and it's plugged into the drive at one end and nothing at the other.