Hey, /vp/. My QR scanner in Moon is giving me the wrong Pokemon when I try to scan from PKHeX. I have the patch installed so that I should be able to do this.
What do? It was working a few nights ago when I was Wonder Trading some Shiny Munchlax.
>>33516763
just inject lol
>>33516779
Kek
>>33516779
lol
sent :^)
>>33516763
sounds like your cameras are out of sync, what you're gonna want to do is re align the vertices along the outer bezel, be careful not to apply too much pressure cause those babies will pop right out, if that happens you're looking at a real precise soldering job, but anyway what you're going to want to do is use your microspanner to turn them 15 degrees per pixel density, then re apply the adhesive to the outer shell, make sure you don't get any on the screws cause you'll need these later, then wait a couple of hours for it to dry, make sure you have a hairdryer ready otherwise you'll be waiting for days for it to dry, the hairdryer needs to be outfitted for 220 voltage, if yours isn't you can get a screwdriver and turn the attunement nozzle until you hear a soft click, you'll have to listen real close cause it's a real softy, when you hear that click you'll know you've gone to far to turn it back a couple metres and it should be good to go, you might want to install an external battery source because the power tends to fluctuate in the house and you don't want your power to go out in the middle of all this, make sure your 3ds is plugged into the charger during all this i think i forgot to mention but it's real important