Busou Shinki and Friends General - someone's gotta start

>>6216234
>boxer custom
P-pics?

File: airbrush-schematic.jpg (59KB, 901x582px) Image search: [Google]

59KB, 901x582px

>>6216126
>Is an airbrush really worth the $2-300? I'm just getting into painting, and don't know if I'm going to be doing anything like weathering or even serious amounts of painting, and it really just doesn't seem to be worth the investment. Is it really that much better than hand painting with a brush?

$300 is a good estimate of the cost of the airbrush, compressor, paints, mixing tools, cleaning tools, respirator, painting tools (masking, holding, etc), and maybe even a booth.

it's worth it if you want to enjoy airbrushing. It's not necessary if you want to enjoy an MD or FAG. It can maximize your enjoyment of a gundam.

pick up airbrushing if you want to pick up airbrushing. not because you want to pick up gundam/models/whatever.

>>6216270
>pick up airbrushing if you want to pick up airbrushing. not because you want to pick up gundam/models/whatever
That's the best hint ever. Should be pinned here and on /tg/ as well.

>>6216248
He posted a group shot of his works back in the last thread
>>6210487

File: Good Girl Gourai.jpg (109KB, 772x1040px) Image search: [Google]

109KB, 772x1040px

"So when are you gonna build this thing, Anon?"

>>6216330
>Those gouges on her cannon

Might want to be a bit more careful with your knife next time, or maybe get some sandpaper instead

>>6216298
Oh.
It's just that none of them looks like a boxer to me.

File: Jinrai Boxer Graviton Rifle.jpg (73KB, 800x758px) Image search: [Google]

73KB, 800x758px

>>6216354
The one in the center. Her armor's based off the Huckebein Boxer from Super Robot Wars. I'll be handing it over to Architect in April and switching Jinrai into something lighter and more ninja-inspired.

>>6216353
Yeah, I was getting too confident and too reckless with my knife. Unfortunately, they're too deep to sand. Gonna have to get some epoxy. Lesson learned though.

>>6216383
Ah well, these things happen.
What I'd normally do is shave off most of the nubs with either godhands or a knife, then sand down the excess with 800 grit paper wrapped around a popsicle stick.

File: Stylet Exploitable.png (160KB, 561x409px) Image search: [Google]

160KB, 561x409px

Reposting for those that might've missed out on this exploitable.

File: Stylet Naive.png (161KB, 561x409px) Image search: [Google]

161KB, 561x409px

>>6216473

File: 1486359953394.jpg (146KB, 600x450px) Image search: [Google]

146KB, 600x450px

>>6216477
Who would coat a baka flatly in glue like that? Now, Hamburger...

File: IMG_20170228_225356.jpg (311KB, 2280x801px) Image search: [Google]

311KB, 2280x801px

>>6216330
The asymmetry of that version's color scheme really upsets my autism.

File: 6452974.jpg (3MB, 2988x5312px) Image search: [Google]

3MB, 2988x5312px

>>6216561
Yeah it bothers me too. I'm thinking about painting it with proper Type 10 camouflage instead of the half-assed color scheme it comes with. Something like this pic.

File: 1391747025263.gif (2MB, 369x277px) Image search: [Google]

2MB, 369x277px

> tfw haven't ascended to the glorious age of FAGs

I know I just don't have time so I'll stick to old fashion shinkis. Really want a Hresvelgr though

>>6216889
It's okay, Anon.

She'll wait for you.

File: 1456383268203.jpg (154KB, 1297x960px) Image search: [Google]

154KB, 1297x960px

>>6216905
gourai kai kinda soonish maybe i hope

I better build my first wave gourai before it comes out

File: C5mSJfSUYAApu7C.jpg orig.jpg (158KB, 2048x1365px) Image search: [Google]

158KB, 2048x1365px

>>6217048
didnt mean to quote but whatever

File: FAGSmugletIsASurvivor.png (156KB, 561x409px) Image search: [Google]

156KB, 561x409px

>>6216477

>>6216889
You should try it. Hres is an especially long one to finish, but you can take your time building her.

Though relatedly to Hres, what's my beg option for a peg thickener? One of her arms is very loose on mine.

>>6217163
superglue or some sort of varnish

>>6217163
Lick the peg, then put a tiny bit of super-glue on it.
Saliva acts like zip-kicker, and it'll dry in a flash.

>>6217201
>Lick the peg
L-lewd.

>want to start building and painting gourai
>still at the part of the year where humidity levels are constantly way too high for painting

patience is a virtue I guess

>>6217219
I know that feel man.
I have high humidity all year round here, plus high temperatures over 6 months.
Painting hobbies are meant for colder climates

>>6217236

Well, it's not great where it's colder either. I live scandinavia and there's no way in hell I can paint during the fall or half the spring, too humid. Same for most of the winter. Not sure if I can if it's low humidity and below/close to zero though, never tried.

File: FAGSleepover.jpg (289KB, 1200x990px) Image search: [Google]

289KB, 1200x990px

>>6217215
Licking the peg keeps her tight, Anon.

>>6217163
Use a bit of Future floor polish, or plastic cement. For Future dip the joint in the solution and wiggle it around in the socket, then separate and let them dry for 24 hours. If you want a more in-depth guide I wrote the Nendoroid general's guide, and there's a joint tightening tutorial at the end so check that out.

If you go the plastic cement route make sure it isn't the "thin" variety with less dissolved styrene, and only apply it to one side. Don't join the parts for about an hour.

>>6217219
>>6217236
I paint indoors with a mobile aircondotioner. Using that, a little ventilation hood, and a gasmask with filters for organic solvents I've never had a problem painting with lacquers so long as it wasn't actively raining. I use a water knockout trap that I submerge in ice water connected to my pressure regulator just to make sure the air is dry for the paint, and I keep a little portable temperature/humidity monitor in my garage so I'm positive conditions are adequate in that room.

>>6217398
No offense to you, but I really can't recommend plastic cement for that kind of application. That shit melts the plastic, not thicken it up. You don't want to be putting that on pegs if you want them to stay intact.

Pledge Future or any other kind of noncorrosive acrylic finish, even just a varnish from Vallejo or Golden, is just fine. Superglue, aka cyanoacrylate, aka krazyglue, aka loctite is more permanent, but given the kind of skills I've seen from this thread, probably not the best choice either.

>>6217411

Well, I'm currently using cans and handbrushing. And since the handbrushing needs primer (in a can) anyway, I can't do that when the weather is shit for weeks on end, either. Honestly though, a couple of weeks and the weather should be a lot better.

>>6217416
It actually works surprisingly well. Yes, it dissolves plastic, but it also has plastic dissolved in it to help weld parts together. It also isn't aggressive enough of a solvent to liquefy whatever you put it on. If you coat a part in a thin layer of cement it will eat away at the plastic, and then when the solvent evaporates it will leave behind a thin layer of clear plastic that has bonded with the original part. I use this technique all the time when building gunpla and have it on hand, and I typically save Future for PVC figures and such that have paint on them.

Don't believe me? Dip a scrap piece of runner in plastic cement, and let it cure without touching anything else (on an alligator clip painting stick). It won't dissolve, and there will be a thin coating on it.

>>6217493
If you want additional definition or gradients on those spray canned parts like you see on airbrushed pieces, consider investing in a dry pastel set and a makeup brush.

File: IMG_20170301_130431.jpg (702KB, 2193x2985px) Image search: [Google]

702KB, 2193x2985px

>>6217416
Left is untreated. Right is dunked in plastic cement. Sorry for belaboring this, but I just wanted to prove the technique works. However, it can be easily fucked up and isn't reversible unlike Future, so it may be above some people's skill level.

>>6217048
>gourai kai kit
>includes new under-slung gun
>and stripped down alternate body from the right page
please let this happen

>>6217581
>Right is dunked in plastic cement.

NIGGA YOU'RE JUST SUPOSSED TO APPLY A THIN LAYER

>>6217592
It was just to prove a point that even submerging the part wouldn't dissolve it

>>6217599
I STAND CORRECTED

>>6217048
>>6217587
So is this the re-release that's coming out in April? Or is that one just a, well, a re-release of the original?

>>6217629
Modified version of Gourai.
Not the same one.
The one in April is a re-release of the original.

>>6217416
Myself I use simple clear nail polish.

File: FAGHresIsAPervert.jpg (130KB, 1006x906px) Image search: [Google]

130KB, 1006x906px

>>6217048
With this, I can hold out on getting a Type 10 (or two, for color-matching purposes) for another couple of months.

Really looking forward to Griefen, too.

>>6216889
Don't worry, anon. By the time you get around to getting a Hresvelgr, there will be like 8 to chose from!

>>6217924
Oh fuck I never even thought of that. Good one, anon. I might try that out to see how it reacts with different types of plastic, because iirc it contains acetone.

>>6217927
Is that supposed to be a nosebleed on Hresvelgr?

>>6217971
>Nose Bleed?
Either that or a cleft lip. Hard to say.

>>6217927
Is that blood on her nose?

File: READY TO FLY(2).png (2MB, 810x1080px) Image search: [Google]

2MB, 810x1080px

>>6217048

Build her, you will not regret it.

File: Clipboard02.png (178KB, 443x378px) Image search: [Google]

178KB, 443x378px

Koto needs to make lewd faces like the new assault lily's

>>6217219
>live in weirdass climate with wet, cloudy summers and wetter, cloudier winters
>procrastinated on painting anything in my backlog
y-yay me

I bought a compressor that comes with a moisture grabber thing about two years ago and havent used it since, so there.

File: FAGHresLift.png (2MB, 1185x1190px) Image search: [Google]

2MB, 1185x1190px

Hresvelgr is pretty flexible, as it turns out.

>>6216330
Hey, how did you attach the freestyle Bazooka to her back like that?

>>6218195
there should be a few pieces left on the sprue that make up the mount

File: i approve.png (115KB, 239x235px) Image search: [Google]

115KB, 239x235px

>>6218190
I think Hres is my favorite thus far.

File: IMG_20170301_204608.jpg (3MB, 3088x4160px) Image search: [Google]

3MB, 3088x4160px

>>6218195
Like >>6218235 said, there are a few extra pieces that let you do it. It's a tight fit tho, and you're going to have to tilt her head away from the bazooka to get it into a shooting position.

>>6218436
God I need to paint her... That closeup is really unflattering...

Hey Anons, how do you decide what colors you're going to use for a girl? Any custom jobs or do you just paint in the colors they come as?

File: FAGDepartmentOfBunnyAffairs.png (1MB, 1125x1120px) Image search: [Google]

1MB, 1125x1120px

>>6218451
I mainly try not to repeat colors.
I plan on starting a Sentai team with them, after all.

Recently, with Hres, I snagged a pic of her online, and messed with the colors in an art program until I got something I liked.
I ended up going pretty close to her originals, though.

File: IMG_5005.jpg (562KB, 1080x810px) Image search: [Google]

562KB, 1080x810px

>>6216442
>shave off most of the nubs with either godhands or a knife, then sand down the excess with 800 grit paper wrapped around a popsicle stick.

personally, I use the cheapest xuron clippers I can find to cut distal on the peg away from model, then shear off the peg til its as near as I can get to the model without inducing pressure stretch marks in the plastic. then I take the cheapest #15 blades I can find on ebay to shave the peg near level. I'll then seam weld with Tamiya extra thin cement, rubber bands to hold pieces together. they bond after a couple minutes, and I then wet sand with 800 grit for big clumps, and polish with 2000 grit. I tend to group the pieces, like I'll cut several pieces off tree, clip them all, then blade them all, cement them all, and finally sand each one down en masse.

I think it comes out pretty well, if you look at the outer most seams vs the inner seams that haven't been touched. pretty cheap too, I'm not spending much on these tools.

it's very zen, like I listen to music, speeches, or other such things as I'm doing this. my most latest guilty pleasure is head massage asmr. super tingly...

>>6218469
Really? I'm planning on doing the opposite. I want all of my FA:Gs to have the same color scheme barring hair and skin tones. This would mostly be to give them easy cross compatibility with accessories and such, but I can't decide on a palate. Nothing too bright, and definitely no monochrome.

>>6218408
Hres is definitely proof that the line's quality is going up drastically, but she's number three for me. I'm quite partial to planes, and Baselard is my favorite Frame Arms by far so for me it's Stylet > Baselard > Hresvelgr > Gourai > Jinrai > Architect > Materia.

>>6218610
Personally I find Jinrai hits just the right level of equipment where she's customizable but has character standalone. Hres having lots of gear is really nice, and I definitely want more like her, but I also have a lot more trouble thinking about how to customize her because she's already got so much she can do OOB. Of the five I have it's Jinrai > Hresvelgr > Baselard > Stylet > Gourai.

>>6218610
Blue and white, man. Or for extra style you can due blue+yellow/gold or black and gold. Gray accents where needed.

File: hIE1450921781.jpg (114KB, 600x900px) Image search: [Google]

114KB, 600x900px

>>6218621
I'm leaning blue/white because pic related just looks so good IMO. Wasn't entirely sure that it was just my Stylet bias, but it's good to get an outside perspective that reinforces my own.

>>6218619
That's definitely fair. Jinrai is pretty much centered around being customizable. How do you think Innocentia will stack up?

>>6218635
I mean I was staring at a poorly constructed version of that same Stylet as I typed that but it IS a good combination. Those colors are why I bothered looking for the recolor over the original though I now find myself wanting both.

>>6218635
Definitely considering painting my regular Stylet like this over the original color. It's up in the air between that and sky camouflage, since some helpful anons taught me how to do that in the previous thread.

File: IMG_20170302_005856.jpg (387KB, 1926x2048px) Image search: [Google]

387KB, 1926x2048px

On the topic of painting FA:Gs I just found this on Twitter, but I can't seem to find any information about it.

Am I the only one who can't enter FG site?

>>6218649
They're FAG paints from Gaia that started selling last month.
Can't find any online shop that sells it since paint is considered a HUGE hazard.
Same reason why we can't get arpeggio paints.

>>6218649
>Plastic Fresh
>Base Fresh
>Shadow Fresh

Oh Japan.

Which models do these "fresh"tones correspond to?

>>6218674
http://www.gaianotes.com/products/framearmsgirl_color_vol1.html

Plastic Flesh is the base colour, and Base/Shadow are used for accents, assuming you just want to match the default color FA:G skin is molded in.

>>6218662
Don't know how I missed this on a reverse image search. Oh well, I'll wait for sealmodel.com to stock them. RIP 2 month surface shipping because paint. I honestly don't get why you can't ship small paint bottles by air. Airlines will let you check flammables in your luggage so long as they are less than 500 mL or something like that.

>>6218674
>inner black

It's how you get the percentiles required for natural US citizenship.

>>6216905
>>6217927
One day, one day

Damnit, why are the specific Mr. Color paints I need so hard to find? I just want to make sure I can match Gourai's skin tone. Is that so much to ask? Having a Japanese hobby outside of Japan is suffering.

I don't really want to have to paint her face, but I might just have to bite the bullet if I can't find another brand that's close enough.

Are there any shinki's with dark skin?

>>6218838
Maochao, Strarf MKI, and Valona have slightly darker tan skin.

Graffias is dark chocolate.

>>6218847
Thank you very much.

>>6218826
Just buy other acrylics man.

File: FAGGouraiLegion.jpg (198KB, 1200x743px) Image search: [Google]

198KB, 1200x743px

>>6218610
>All FAGs: Same color.
I would probably do this for something more homogenous, like Megami Device, or like this guy did with his awesome Gourai collection, but to me they're just too different. Gourai and Stylet will never be served by having the same colors, save for as a dress uniform.

Nominally, you could rationalize Stylet, Hres and Baselard as "Air Force" but Bassy is clearly based around a space fighter, and Hres is such a radically different design from the ground up.

Gourai and Jinrai are nominally both ground units, so I could see doing them similarly, but I'm just too enamored of the Red Oni/Blue Oni presentation.
Same with Material Yin-Yang Materia are my favorite so far.

>>6218989
From what I remember Jinrai was originally a customized Gourai build, so she works better with exotic custom colours.

>>6218826
sealmodel.com I've used them numerous times. Gotta wait a long time for the paints because they come via boat/land only, but the prices are fair and the stock is good.

File: FAGKurabe.png (2MB, 1577x625px) Image search: [Google]

2MB, 1577x625px

>>6218610
Hres is a little dim, but her heart is in the right place. Gourai is a soldier by nature, and has trouble with conflicting orders.

>>6218989
>Nominally, you could rationalize Stylet, Hres and Baselard as "Air Force"

This is what I'm doing. Stylet is long range air support, Baselard is a bomber, and Hres is a more mobile fighter. Dressing them in white, royal blue, and gold.

The others are my ground team. Gourai is equipped with gatling guns and missiles, Architect is loaded to the gills with blades for CQC, and Jinrai is going to have the upper part of the Gigantic Arms strapped to her back (and probably Gourai's unused bazookas). They're mostly painted in panzer gray because I'm shit at camo.

File: Speak Gabrine.jpg (177KB, 600x450px) Image search: [Google]

177KB, 600x450px

>>6218847
>Forgetting Gabrine
anon pls

File: 8752453687_32a161560f_k.jpg (1MB, 2048x1365px) Image search: [Google]

1MB, 2048x1365px

>>6219056
>Dressing them in white, royal blue, and gold
yes this seems like a good palette for an air combatant

Bunnylard and Hres Ater are both white/blue/yellow to begin with anyway

>>6219072
>Wanting to remember Gabrine

>>6218870
meep meep!

>>6219078
[Urge to paint imtensifies]

Nanoha's color scheme is so good. That little bit of red helps make it too.

>>6218635
Innocentia goes a bit too light on Frame Arms and a bit too heavy on girl for my tastes. You could definitely beef her up with the right parts, but it'd take a lot more work.

I'm skipping her for now, but if I got her I'd want to do some kind of nine-tailed fox build.

File: IMG_1069[1].jpg (2MB, 1920x1280px) Image search: [Google]

2MB, 1920x1280px

Daily delivery.
Finally got a clear append Hresvelgr

File: 1016s.jpg (158KB, 612x816px) Image search: [Google]

158KB, 612x816px

>>6219109
Bought the bottom left kit without knowing exactly what it was, but was worth a punt at 2000 yen.
Turns out to be one of these.
1/12 scale and not too shabby, will be using different joints though.

>>6219085

I was kinda thinking about getting her to do a Miku Hatsune thing but I'm not sure I could ever get the right shade of green paint.

File: unnamed.jpg (139KB, 2120x351px) Image search: [Google]

139KB, 2120x351px

>>6216227
OP, Don't forget to include the Kotobukiya's Frame Arms Girl YT channel when you make the next thread

>>6218989
I always assumed Baselard was a heavy gunship rather than a space fighter.

File: FAG_Baselard (8).jpg (66KB, 800x640px) Image search: [Google]

66KB, 800x640px

>>6219338
The main reason I assume space fighter is that she's COVERED in multi-directional thrusters, and the anime preview shows her shields being individually flight capable, sort of like an R-Type or Gradius fighter.

If she was primarily atmospheric, she'd have more of her thrusters pointing in one direction.

Also, if she was a heavy gunship, I'm pretty sure she'd have larger breasts.

Griefen, as an example, is a gunboat, and she's pretty stacked.

>>6219125
Too bad the ballden joints look like trash

>>6219085
>but if I got her I'd want to do some kind of nine-tailed fox build.
I am currently looking at various kits pondering how to do that very same thing to her. not going to get her till i can armor her up to a point I am satisfied.

FAG with huge tits and drillhair when

>>6219449
Ooooooohohohoho~!!

>>6219430
That's pretty solid reasoning. Especially that last part.

>>6219449
When Rapier.

>>6219430
baselard is toespikes and a jetmode away from being valhawk from SRW W.

>>6219449
That'll be Rapiere.

>>6219442
I'm thinking Mega Slash Edge might have potential? Six tails from the side blades, three from the center blades?

>>6219430
I'd say a light space cuiser. Quick and manuverable with a good number of laser cannons.

File: Cz2xJkLUoAAg2O7.jpg (207KB, 900x1200px) Image search: [Google]

207KB, 900x1200px

>>6219509
Personally I am not a huge fan of using blades for tails. As adorable as Renge is, it is the one down side I have with her. The insane versatility the unit has as a swiss army weapon does make up for it. But I digress

I seen this thing recently, and also someone did up a nine tailed shadow fox Zoid in one of the image compilations i seen for this past wonfes. At least I think it was this wonfes, could have been that Kotobukiya celebration thing a little earlier. Regardless, unless it is feasible to easily cast the tail on my fox(got to check that), using shadow fox for the tails will get very pricey and fast.

>>6219571
The Extend Arms shields definitely have the desirable fluff, but there's a lot of useless parts going into it too.

I'm also thinking you could put together some of the long arms from Flexible Arm B with the beam saber bits from Gunblade Lances, for fluffy tails when the blades are off to sword tails when they're on?

>>6219431
>will be using different joints though

Finished my first FAG today (stylet), I thought the stand she came with would be shit but you can actually do somewhat decent air poses with it.

>>6219571

Every time I see that custom I can't help but think how absolutely terrible her hair is. Awful, just awful.

File: ReactWTFamIReading.gif (1MB, 340x281px) Image search: [Google]

1MB, 340x281px

>>6219449
>assembling injection plastic princess curls.

>>6218870
whats the general consensus of Megami Device, are you guys going to collect them ?

i dont see post them (the soldiers i mean) much to be honest

File: IMG_4992.jpg (740KB, 960x1280px) Image search: [Google]

740KB, 960x1280px

>>6220287
I've got 2 snipers I'm building up.
2 assault/scouts on the way.
3 of the hornets ordered.
3 of the roadrunners ordered.
and I'm prob gonna get 2-3 black haired oni that's been shown. may skip the blond one or just get one.

I got 4 muscutos, but I think that'll prob be it. he hasn't replied to any of my emails.

I purchased a couple gourai's and a hamburger, but I think that'll be it. they were from amiami, so I couldn't cancel them. may just give them to friends or harvest for parts.

File: MDMonocycle.jpg (169KB, 1200x900px) Image search: [Google]

169KB, 1200x900px

>>6220287
The available ones don't appeal to me much.
Once the SOL series comes out, that might change.
I'm pretty interested in the ones they debuted in Wonderfest, but it'll probably be Autumn before they come out.

I love the FAGs, and Megami Device are similar enough that I might grab one once I'm done building all the FAGs. Based on availability, of course.
Roadrunner looks like the most interesting one so far.

>>6220287

No money for model kits until the start of the work season, hopefuly I will have some spare cash and the grappler will still be avaible.

>>6220287
Likely my favorite among the "sucessor" lines. There's so much potential to be had with it.

>>6220328
>that QUALITY Atra

File: 20170302_123438.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Mail came

>>6220287
Bought the sniper/striker-package, but a fracture in my had after a car crash left me unable to build them up until now.

>>6220287
Hell yeah I'm collecting them. The WISM girls are good for army building.

>>6220287

Gonna get roadrunner and hornet at least. I love their faceplates.

>>6220639
>Hello Mr.Mailman, where is my Hresy???
>Still in some shady warehouse in Japan? O-okay.
SAL be damned.

>>6220287
>i dont see post them much to be honest
Probably because people here are slow builders. My soldier is stil in the box waiting to be built, while the catgirl haven't been delivered yet, go figures.

File: C5_XKjsVMAArwIS.jpg (122KB, 675x1200px) Image search: [Google]

122KB, 675x1200px

Heck Yea

File: C5_XYTnVUAIk2g1.jpg (117KB, 675x1200px) Image search: [Google]

117KB, 675x1200px

>>6220769
"Seriously?"

File: 20170215_225143 - 25p.jpg (246KB, 1328x747px) Image search: [Google]

246KB, 1328x747px

>>6220771
You could help put her together and have her as a sister.

File: 20170303_230518.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>>6220777
She's already a big sis of a bunch.
Won't help, I guess

File: 1488550526.jpg (85KB, 850x478px) Image search: [Google]

85KB, 850x478px

>Just a week after the WF
>Local(Korean) Hobby shop
>Just lost the meanig of my Japan trip 2 wks ago

File: IMG_9776.jpg (196KB, 1024x768px) Image search: [Google]

196KB, 1024x768px

Look what I got

>>6220818
Tell me about the figma anon.

>>6220818
S c a n s

>>6220836
>figma
Did you mean the Custom Lilies?

>>6220885
Yes sorry.
I guess you are going to take pics once thei are free from the plastic prison.

File: IMG_9790.jpg (91KB, 768x1024px) Image search: [Google]

91KB, 768x1024px

>>6220888
Just what I was doing, actually

File: IMG_9794.jpg (81KB, 1024x768px) Image search: [Google]

81KB, 1024x768px

>>6220898
All the hair and face parts.

The braided bun is clearly meant for the type A ponytail head while the dango are obviously for the type C twin tail (they even give you two)

File: IMG_9799.jpg (96KB, 1024x768px) Image search: [Google]

96KB, 1024x768px

>>6220903
Breakdown of the clothes that come on the body. Basically just the same set as the first type B release in an alternate colour scheme.

File: IMG_9801.jpg (70KB, 1024x768px) Image search: [Google]

70KB, 1024x768px

>>6220904
Body is the new Picco Neemo body- And they seem to have given it a new unannounced upgrade.

This also applied to the body I got at Wonder Festival, but they seem to have improved the torso joint so that it doesn't come off so easily. In fact it doesn't seem to come off at all anymore (not 100% on that since I'm not about to tug on it with all my might, but a decent amount of force isn't enough to separate them)

File: IMG_9795.jpg (164KB, 1201x611px) Image search: [Google]

164KB, 1201x611px

>>6220906
Hair parts are of course compatible with the ones from previous releases.

File: IMG_9803.jpg (151KB, 1147x592px) Image search: [Google]

151KB, 1147x592px

>>6220908

File: IMG_9811.jpg (147KB, 1024x768px) Image search: [Google]

147KB, 1024x768px

>>6220911

>>6220908
The expression on the right is just fantastic.

>>6220911
Careful with that Majin in your left arm, there.

File: bunnylard crash.jpg (165KB, 532x1500px) Image search: [Google]

165KB, 532x1500px

These skellies can be salvaged for wrist joints it seems.

>>6220953
>bunnylard tsumtsum
I love it

>>6219082
Oddly enough, releasing a Coyote MD would make Roadrunner an instant sell to me,

>>6220953
Don't tell that in the skellie thread. It could prove too spooky for them to bear.

>>6220911
walking the path of explosions.jpg

>>6220799
Can't see the price tag, how much was it? Seems Kotobukiya is now distributing officially to Korea now. Meanwhile KotoUS is still sitting on its ass.

>>6220799
>dark green assault/scout
Where to get one?

>>6220911
which other assault lily did that short hair back come from?

>>6221160
Korean hobby shops, clearly.

...But seriously, where? I can't find anyone who is even pre-ordering it.

>>6220764
I was with SAL too, took longer than it did last time at 18 days rather than 9

>>6221160
>>6221185
It's an alternate color exclusive to the Kotobukiya online shop.

>>6221282
And the regular release of it isn't out yet.

>>6221160
>>6221185
It was released early at Wonder Festival, the store in >>6220799 is run by scalper scum.

>>6220799 should burn the place down.

>>6221312
>And the regular release of it isn't out yet.
It's been released more than a week ago. They're selling it online and their offline store.

>>6221312
By your logic, Mandy and Ami should be burned down as well

>>6221341
In fact, they started selling it since Feb 7th (according to twitter). So it's normal that >>6220799 , Mandy, Amiami have stocks.

>>6221312
Burn yourself anon

>>6221341
I wonder how long before Kotous, HLJ and AmiAmi get it?

>Ameriscrub.

>>6221361
>>6221345
the regular release is june, retard
http://www.kotobukiya.co.jp/product/product-0000002347/

kill yourself

>>6221364
>KotoUS
I never count on these guys.

>HLJ
Never.

>amiami
Might take a while.


Go to Mandy instead. I saw some up last week.

>>6221370
My bad. Thought you were talking about hamburger.

>>6221373
>>6221371


>>6221160
>>dark green assault/scout
>>6221282
>It's an alternate color exclusive to the Kotobukiya online shop.
>>6221312
>And the regular release of it isn't out yet.

So, I want to order some oyumaru along with a couple MSGs for my FAG from HLJ and it says backordered.
What now?

>>6221390
Wait for it to restock?

What does 'clear parts append' mean?

>>6221394
It has extra clear parts that's just clear, not colored (Colored version included)

Tiny robot girls are like a drug to me.

Unrelated: What will Koto do if they get to a point were there's as many FAGs as there are Frame Arms? Do you think they'll start making original designs for FAG? Or is that what Megami Device is for? Also is the Cross Frame thing meant to be a crossover FAG type thing?

>>6221312
>run by scalper scum

The price on that WISM set is lower than when they were selling it at WF, putting into consideration the KRW > JPY exchange rate. Must be some incompetent scalping going on there.

>>6221467
Cross Frame is a super old kit line that was using the Frame Arms system to make kits for third party licenses, ala Border Break and stuff. This is them reviving that line with Frame Arms Girl and GaoGaiGar.

Finally got the Frame Arms Girl mook today. Looking at the page for Hresvelgr Rufus, I'm not convinced it's planned to be an official product yet. I'm pretty sure it was just a custom based off of what's written.

>>6221484
>a book of nothing but sample builds and customs

>I'm not convinced it's planned to be an official product yet. I'm pretty sure it was just a custom

no shit?

>>6221488
People were talking about it as if it were going to see an official release a while back. I'm just notifying people that it doesn't seem to be the case.

>>6221493
Where is that?
>>6221482
Ah, well I still have a mighty NEED

>>6221493
Whaaaaat? The Akiba Koto store didn't have cute little signs like this. :[

>>6220953
Poor Skellie

>>6221000
>Triples confirm that you shouldn't tell them

>>6221493
Reposting from the buyfag, I guess it is in one of the Koto stores

>>6221401
Oh ok thanks. I was scared I missed out on something

>>6221392
H-how long does it take?

>>6221553
Fastest I've seen.......3 days
Longest was 1 month for me

>>6221467
I'm pretty sure they're pacing themselves to avoid that. This year we're getting FAG Hresvelgr, FAG Innocentia, FA Reyfalx, FAG Hresvelgr=Ater, then whatever comes in the second half of the year. Ater's just a repaint with some parts changed out, and Innocentia's an original design that's basically just a base body. At Wonfest we got both the FA and FAG Byakko, art of a new FA, and art of FAG Griefen.

We might see some more FAGs based off FA customs, like Jinrai, plus variants like Gourai Kai, but it looks like they're aiming to pace themselves so that they don't run out of designs.

File: 1_c8d0aabb-f557-41fd-acea-8e7a42161863_grande.jpg (39KB, 400x333px) Image search: [Google]

39KB, 400x333px

Has anyone tried using camouflage stencils on FAGs or MDs? The ones I'm looking at specifically are the ones on fallouthobbies.com. Specifically the infantry-sized traditional camo in the pic. I'm kind of worried that the bigger size would be too big for the tiny FAG armor (Stylet's and Gourai's in particular) since their armor mostly comes in lots of smaller, disconnected pieces rather than a few big, contiguous ones, but I'm still not sure how well the smaller patterns will actually work. I wanted to ask you guys before I commit tho in case anyone actually has experience with these and can offer advice.

>>6221390
Place the order anyway and set it to Private Warehouse. When it comes in you'll get a notification.

>>6221467
the Megami line and the Cross Frame sub-line will help them a lot if they ever need to pad things out

but mostly what >>6221585 said, they got almost as much new Frame Arms coming as they got Frame Arm girls. Although I kinda hope they feel like they need even more padding,. It might mean they will put out a line of HMM Girls.

And that would be the day my wallet completely dies as my shelf becomes populated by animal robot girls.

>check if the big gun gourai comes with can be placed on her back and tilted forward
>head is in the way

You know what I'm gonna put two of them on her back and they're gonna be there, completely useless but at least they will look cool.

>>6221646
You can put one on if you tilt her head away from it. There must be some MSG you could use to extend further above or to the side of her head tho.

>>6221653

Yeah I found one that should do the job. Thanks for reminding me.

>>6221646
Grab Flexible Arm A and/or Flexible Arm B if you need more range on your joints. B in particular is absurdly useful and I try to scoop some up whenever HLJ has them in stock. Unfortunately it's one of those products they mark Discontinued between batches for no reason.

>>6221646

Just put some little extenders on there, bro. A simple ball joint gives you all the range you need.

>>6221475
I remember that shop imports gunpla as 1:10 ratio (generic rate, although official direct shop sells at 1:12),
but not koto's. even though they're official retailer for koto kits.
It seems to have megami at 1:10, and FAGs at 1:12. almost bargain for'em.
even Real type ver.s have no premium on it.
At the fact that other exclusive items(7-11 gundams & etc) were sold in a premium price,
I guess they just got a carton from koto itself

Reading this thread makes me feel inadequate as though theres a 1000 foot deep rabbit hole that I'm 5 feet into, but too scared to go any further.

>>6221757
Don't feel that way, Anon! You can go as deep as you want! It doesn't matter if you're dressing them up in fancy clothes and giving them custom paint jobs or if you're just popping their parts out of the runners and snapping them together, as long as you build your FA:Gs or MDs with love and care, they'll always love you back!

Remember, everyone has to start somewhere! Everyone pro was a beginner at some point!

How fucked am I if I want to get Arnval MK.2 full arms or Tempesta MK.2 full arms?

File: C6CVn6FUYAA583f.jpg (50KB, 354x380px) Image search: [Google]

50KB, 354x380px

Koto needs to start selling this

>>6221771
>tfw your stylet is stored in pieces in her box because no compressor
It's like fate.

>>6221757
Honestly, I'm a snapfag for the most part and I still make stuff like >>6216375. The only paintwork there so far is rattlecans I used on Jinrai's skin-colored parts to give her a bodysuit, and depending on what kind of build you're after, you don't even need to do that.

Start simple. Get a girl you like, get some extra parts you think would go nicely with her. Some nippers and an Xacto knife from any hobby store is all you should need to build her if you're careful. Put her together, put the parts on, and you're done.

>>6221778
This.
Koto should have already figured out that a custom-oriented line like FAG can lead to a wallet's death by a thousand shallow cuts.

>>6221778
They could milk me dry with face plates and waterslides alone.

>>6221772
Check Mandarake. Arnval MK2 Full Arms are going to cost you. Strarf not quite as much.

>>6221772
You can still found them around if prices don't scare you.

>>6221787
It already does. MSG sets are fucking addicting, man. I'm typically using two or three per girl, and that Boxer monstrosity took fourteen of the damn things. Even if they're only about five bucks apiece, the total cost racks up fast.

>>6221771
I don't mean to blow my own horn but I used to be really good at painting warhammer models, but all my paints are dried up and nowhere nearby sells good paint anymore. I just have a black liner but I haven't used it yet. I'm also scared of going to paint my Fags and screwing something up.

I'm more concerned about how people here are ordering from some guy in SK, lurking Jp twitters and going to physical JP events to get these rare photos or kits that I won't see where I am now.
>>6221781
I'm onto my second one and I like her kit which is nice

File: IMG_20170303_183535.jpg (155KB, 901x548px) Image search: [Google]

155KB, 901x548px

>>6221829
>MSG kits
This

Just my Gourai uses
-4 gatlings
-4 chain links
-3 BF parts
-5 HG gundam kits

Multiply that by 6 since I have 6 FAGs......
Making FAGs is raping my wallet.

>>6221860
>Chain link
I mean belt link

File: rsz_img_3993.jpg (939KB, 1296x864px) Image search: [Google]

939KB, 1296x864px

>>6221829
>>6221860

I want to get off this wild ride

>>6221846

>gun is so stupidly large it bows and sags in three different places.

That looks awful, bro.

>>6221963
It is a bit annoying, but I don't really know how to fix it.

>>6221978
Try dipping it in hot water and unbending it.

>>6221995
The components themselves aren't bent, but when they join together they seem that way. Particularly where the front cover is, the join is wonky, but I'm not sure how to fix it or if heating would do anything.

>>6221157
>Ever trusting KotoUS
Kek, you'll never get it. Might as well just start stalking Mandy now.

>>6221860
>-5 HG gundam kits
Damn, and I was doubtful because I wanted just two kits to custom one of my FAGs.
Do you just mine them for parts?

>BF parts
What are those?

>>6221930
>Clear Set
triggered.jpg

>>6221978
The pegs might be a bit loose, so you could try giving them a bit of Pledge Future.

You're also not supporting the gun particularly well, which is related to the pose being very awkward. Try drawing it back so that the stock fits under the shoulder. You want the right arm's elbow aimed diagonally downward, not out to the side.

For anyone looking for extra FAG faces, the red Baselard comes with 6 blanks plus 4 prepainted ones.

>>6222022
Gundam Build Fighters came out with a bunch of option sets akin to MSG sets, since the series is about making custom gunpla to fight in tournaments. Some are a bit interesting, though I've found that compared to typical Bandai quality they're really lacking.

>>6222037
I feel like I was aware of this before but I'm glad to be reminded. Can't wait to fuck up the eye positioning and end up with a cross-eyed bunny.

>>6222022
I'm planning on painting those, it's slightly cheaper than buying the exceed binder and the swords separately.

>>6222022
I bought the kits specifically to make Gourai.
1 HG Noir
2 HG Jesta cannon
1 HG Zabanya
1 HG Unicorn FA

I don't know where I should use the rest of the parts X(

>>6222040
>Some are a bit interesting, though I've found that compared to typical Bandai quality they're really lacking.
So the plastic is of lesser quality? M-maybe I can avoid falling down that hole then.

>>6222061
It's just that since my childhood BW Razorclaw's left claw broke without me doing anything to break it I've been distrusting of transparent plastic.

>>6222064
Which parts are from those? I'm just starting to get into this customizing stuff and I'm looking for ideas I could draw inspiration from.

>>6222096
Hand, pistol, holster from Noir
Rifle from Jesta
Supporting joint and connecting parts from Zabanya
White piece in the middle of the back joint from Unicorn

Still have to figure out a way to place Unicorn's 3 gatling guns, Jesta's grenades, and Zabanya's missile packs.

>>6222096
The plastic is about the same, but the part separation is really shitty and each kit only comes with at most one or two colors, with everything else being done with stickers that feel a lot cheaper than what they use on proper HG gunpla. MSG kits nearly all come in just dark gray, but that's a neutral color that usually looks okay OOB if you can't paint for shit.

BF stuff being designed with HG gunpla in mind also means it's kind of small for FAGs. There's circumstances where they're compatible, but really I'd only use them if you have a specific thing in mind.

>>6222020
Oh no, I don't trust KotoUS to bring over anything of note. I'm just really disappointed in them almost constantly. I hope people have been sending them emails about these enough at least to make them miserable about them.

>>6222123
minor additional advice:
Since HG Build Custom series are meant to be used with gunpla, some of the weapons will be too big for FAG/megami hands.
something like golden claw from matsuri weapon (Yup, mostly hand-sized close combat weapons), for example.

Saw Mandy was selling a Yda reissue with extra face parts for 8000.
Trivia: The reissue Ach & Yda have much sharper printing on all their parts, crisper faces, better hands, and slighlty different colored skin tones. They're a bit pinker than the originals.

File: IMGP3270-Pano.jpg (260KB, 2026x600px) Image search: [Google]

260KB, 2026x600px

>>6221846
>>6221963
>>6221978
I've been thinking about gluing mine together so it doesn't sag, For the time being I've just rearranged the pieces so it doesn't sag much.

So a guy in my local hobby shop said that hand painting isn't good for anything but small details. Apparently it always comes out rough and never looks as good as airbrushing or spray cans.

Is hand painting really that much worse?

>>6222253
You need an extremely large dose of gitgud compared to spraying

>>6222253

You can get a fairly good look with some techniques, eg using liquid to level the surface, fine grit sanding, flat coats etc. But on macro photography all the small flaws will show.

For large surface areas I just hit it with canned tamiya spray for the base color.

It's certainly possible to get decent results.

File: 1487347704008.png (2MB, 800x1230px) Image search: [Google]

2MB, 800x1230px

>>6220799
>Just lost the meanig of my Japan trip 2 wks ago

Honestly if you're not going to wonfes for the GKs and doujin manga you're doing it wrong. Some of those are sold once and then never againn, while the ofiicial stuff can still be found later much easier

File: vb6_manual4.jpg (938KB, 1160x833px) Image search: [Google]

938KB, 1160x833px

>>6222353
she now needs a set of big ass cannons on her back and then she can be a Monster Gourai

>>6222253
>Is hand painting really that much worse?

Not really, it just takes a fuck load longer. Like waiting an hour to put on the next layer instead of anything between a couple of secs to a minute. So complex paint schemes take a very long time.

But it's not like the spray gun completely replaces brushes either - you still need them for aging and most special scale effects.

>>6222253
>set of painting brushes around $30
>airbush $300
>airbrush is just better trust me
It was a store clerk wasn't it.

>>6222401
Have you airbrushed before?

>>6222401
Unless you're going to be like a master hand painter getting an airbrush is the way to go, but you don't need to spend $300. $300 should be the cost of your airbrush assembly including the airbrush, a stand, compressor, tubing, pressure regulator, and filters (optional).

>>6222401
Airbrushing lets you have thinner layers, no brush strokes, and access to lacquers which level beautifully but can't be handbrushed.

But as that one anon said, get an airbrush if you want to get into airbrushing, not because you want to paint.

>>6222396
This, and also thin your paints to the consistency of skim milk. You have to layer up more with hand brushing, but you can get some good results with a lot of patience.

>>6222402
Yes, but I only use it for first layer or my customs.
>>6222410
>>6222413
>master hand painter
>no brush strokes
Damn I keep forgetting about amount of people with ham hands and no experience in this hobby, sorry my bad.

>>6222418
Back up your claims

>>6222418
as a fellow hand painter, I got to agree with them. we can't see the flaws with the naked eye but with how much cameras keep improving, the brush strokes that are there are more and more likely to show.

I do feel they are greatly exagerating things like 'must be master painter for great results' but doesn't mean they aren't completely wrong.

>>6222353
>going to wonfes for the doujin manga

>>6220906
What does the nude body's ass look like?

>>6222501
Like ass.

File: IMG_20170304_103901.jpg (1024KB, 1699x2956px) Image search: [Google]

1024KB, 1699x2956px

The new Greifen girl looks great (also oh my gosh these legs are the best thing ever, what even)

File: BS and FAGs are great acronyms.jpg (34KB, 350x263px) Image search: [Google]

34KB, 350x263px

>>>/a/154191304

File: C6EBuGmUsAA_gvN.png (2MB, 1200x1088px) Image search: [Google]

2MB, 1200x1088px

http://tgbox.web.fc2.com/hres.html

50k gook dollars (or more) and this could be yours!

File: tomahawk.jpg (91KB, 840x999px) Image search: [Google]

91KB, 840x999px

>>6222393
I thought that too, but she could also pull off a nice Tomahawk Gourai with those shoulder mounted missile pods
Just needs some under-slung weapons like in her kai version >>6217048 or just mounting one of her large cannons under each arm
and then some extra bits above and behind her shoulders to complete the look and balance out the weight of the cannons some

>>6220766
This absolutely. I've been in the middle of separating parts by color for different finishes for 2 of my 4 for two weeks now.

>>6222254
>>6222258
>>6222396
>>6222410
>>6222413
>>6222417
>>6222454
Thanks for the info guys. I don't have a ton of disposable income and I've already been spending a lot of it on the FAGs themselves. I guess an airbrush isn't entirely out of the question, but for now I'm only really interested in FAGs and MDs so I don't know if I'd get enough out of an airbrush to make it a worthwhile investment. Still, I'm not satisfied with the dullness of my Gourai's base armor and I do want to spice it up. I've decided that I'm going to try hand painting her and see how it turns out, then go from there.

>>6222401
It was, but he wasn't pushing the airbrush as much as he was trying to ward me away from hand painting. Convinced me to get a few spray cans instead. Afaik the shop doesn't even sell airbrushes, so it's not like he was shilling. He was a really nice guy in any case though. Had his Jinrai displayed in the store, too.

>>6222647
>Convinced me to get a few spray cans instead.
That's really the way to go if you're not the sort of person who can pour loads of money, time (maintenance) and space (booth and ventilation) on an airbrush.

>>6222666

Handbrushing is cheaper than going all out on cans though.

Personally I use a mix of the two, handbrush any flat colour and cans for metallic/gloss.

>>6222647
>Convinced me to get a few spray cans instead.

Absolutely worth it for base coats. It's just that you'll quickly pay more cash for just that alone than you would've paid for an airbrush setup.

File: IMG_20170304_170218.jpg (312KB, 1762x2048px) Image search: [Google]

312KB, 1762x2048px

>>6222572
Cant reply to that thread so i'll leave it here.

>Mahoromatic
>old and obscure

That post really activated my almonds.

>>6222647
>>6222666
>>6222719
Using spray cans for a single kit can cost anywhere from $30-50, the same amount on handbrush paints would probably last around 10 kits.

>>6222759
Depends on what you're doing. If you're only changing one specific color into a different one, and leaving most of the base plastic colors alone, spray cans can be economical. It's especially true if you're like me and you put the gray suit on nearly all your FAGs, so that one can can stretch across a few different kits. If you're doing full repaints, then you'll definitely want to use other methods, but I tend to keep my kits mostly the colors they are.

File: smart stylet.jpg (343KB, 750x1000px) Image search: [Google]

343KB, 750x1000px

Can anyone identify the parts used on this?
I'm kind of bad at identifying the Exceed Binder when not in backpack-shield mode but I've checked other modes of it and it doesn't seem to me like it's the Exceed Binder.

>>6222647
If you're not painting much, you can use a cheap airbrush that uses airbrush propellant.
I bought one from michaels for like $10~15 with airbrush and propellant included and it lasted enough for 3 gunpla kits.

>>6222811
Zeta gundam
Verde buster gundam
Infinite justice
Lightning back weapon system MK.2
Battle arms
Powered arms
.
.
That's all I can tell.
Probably best to go ask in busoushinkiworld @ZeroEdge

>>6222202
Might copy you if you don't mind.

>>6222850
>Lightning back weapon system MK.2
Ohh, this is a good idea.

If this is the unpainted color >>6222811
the blue looks almost the same.

>>6223016
The lightning back weapon sytem MkII is a darker blue than in that picture

>>6222647
when it comes to hand paints, acrylics are the easiest, Vallejo in particular is very user friendly. Unfortunately Vallejo is very weak and even with top coats it still is pretty easy to scratch off. I have no experience with it yet but there is a new brand of acrylic paint that is supposed to be very good. Mission Model Paint, I seen quite a few people post reviews that all describe how shocked they are over the performance of the paint. Not sure how many of those people used it for hand painting though.

File: bc20_01.jpg (68KB, 800x546px) Image search: [Google]

68KB, 800x546px

>>6223016
That's with paint. This is what it looks like unpainted.

Anybody got a link to the translated manga?

>>6223503
patiently waiting for bunnylard now
http://bato.to/comic/_/comics/frame-arms-girl-lab-days-r20405

>>6222852
go for it, i think it looks better that way

File: 20170219_113139.jpg (827KB, 2048x1152px) Image search: [Google]

827KB, 2048x1152px

>>6222353
Well, I just got few of the accessories at doujin booth for going merch booth first and all I got was free sample nipper from Godhand.
Feelin' quite regretful...

>>6223557
What, I'll love to get a free sample godhand nipper

>>6223648
It's a generic, not the spn-120 ultimate nipper.

>>6223925
C'mon man, it's still a free sample..

>>6223925
It might be a PN-120 but seriously thats still $20 of nippers for free

>>6216227
so now that wonfes is over, has anyone gotten emails or packages back from muscuto?

Anyone have some side by sides of Shinkis, F.A.G.S and MD's? Generally trying to figure out scale differences.

>>6219125
where did you buy that kit? It looks like a great base for some custom work.

If at all possible I'd like to know what to look up.

File: WP_20170116_20_44_21_Pro.jpg (2MB, 3264x1840px) Image search: [Google]

2MB, 3264x1840px

>>6224258

>>6224008
He's put up a notice on the naver cafe saying he's back to work on older orders and has planned on not doing anything new for treasure fest so that he can do catch up. Said he'll be putting up another notice about the orders themselves later.

File: C4I_qEXWQAAge7g.jpg large.jpg (90KB, 1024x768px) Image search: [Google]

90KB, 1024x768px

>>6216889
> When Shinki masutahs first try to transition to FA:Gs

>>6224860
>note to self: Don't let Strarf build the MD

File: image.jpg (92KB, 720x495px) Image search: [Google]

92KB, 720x495px

>>6222353
>Those anomalocaris figures

File: gourai stares at a lardo.png (154KB, 664x322px) Image search: [Google]

154KB, 664x322px

Chapter 3 of Gourai Stares at Things is up.
http://bato.to/reader#8a6f4e98ec032338

>>6225053
this manga is great

So which one is better for baby first FAG ?
-Baselard
-Hres purple
-Wait for Hres white ?

File: Veigues Tactical Gladiator custom.jpg (135KB, 734x979px) Image search: [Google]

135KB, 734x979px

>>6224968
Stuff like that is what makes wonfes unique, titty scales of FotM wayfoos can fuck off

>>6225078
Babby's first FAG should probably be Gourai, Stylet, or Jinrai honestly.

>>6225085
But i prefer Hres and Baselard design, i also heard early FAG before baselard have some problem at their crotch joint.

File: IMG_6090.png (291KB, 370x268px) Image search: [Google]

291KB, 370x268px

>>6225053

File: 2b megami.jpg (196KB, 800x1200px) Image search: [Google]

196KB, 800x1200px

>>6225063
>>6225053
Too good, I'm afraid the anime won't live up to my expectations when compared to the manga

File: IMG_6088.png (291KB, 370x268px) Image search: [Google]

291KB, 370x268px

>>6225097
Exploitable.

>>6225078
Baselard is way easier than Hres.

>>6225053
Baselard's personality was a little weird for me, I guess I expected her to fall into the smiling schemer stereotype, but I'm glad she's how she is

>>6225095
Those kits don't have that problem anymore. The issue was that the hip joints were all polycaps which would get loose. They've since replaced those with ABS joints, even for Gourai's rereleases, which are much nicer.

That said, the newer the kit, the more improvements they have. That's usually Kotobukiya's modus operandi. So Hresvelgr would likely be a solid choice for you if you want to just try it out.

>>6225121
This is not the face of mercy.

File: FAGWhereDoBabbyComeFor.png (158KB, 561x409px) Image search: [Google]

158KB, 561x409px

>>6225105

>>6225053
I like how talkative Gourai is despite having nearly no personality initially. It's cute.

>>6225127
yea, those polycaps were horrible
I replaced my gourai's with the extra abs ones from my Jinrai

>>6225124
what a whore

>>6225078
Hres has the most gear and most advanced engineering, but her part count is fucking massive. Baselard has a bit less gear but comparably good engineering.

If you want something with solid engineering and room for customization, Jinrai's perfectly fine, but if you want a more complete experience OOB, Hres is quite worth it.

>>6225053
Too damm cute

File: BULLY.png (285KB, 563x619px) Image search: [Google]

285KB, 563x619px

>>6225053
Stylet is so bulliable.

>>6225078
hres=ater is the best, but is ot ik to w8 her release?
if you want to have more than one fag in the end - so begin with baselard and preorder hres=ater
if you want only one - the go for hres purple

i recieve hres purple week ago and it was very hard design to preorder ater - cause i dont like to have army of clones

File: Stick a cable.png (273KB, 436x776px) Image search: [Google]

273KB, 436x776px

>>6225053
L-lewd

>>6221641
>It might mean they will put out a line of HMM Girls.

Be still my heart. Imagine if they then took the Gunsniper girl and made two variants of her where the base girl looks like the character who piloted that variant in the anime? My wallet could not handle a Gunsniper Naomi. It just could not.

File: C6PJb3wVAAASb74.jpg (196KB, 1200x900px) Image search: [Google]

196KB, 1200x900px

heads

>>6221641
>>6225634
Isn't the Zoids IP itself still owned by Tomy?

>>6225682
They already have a deal with Tomy to make HMM and D Style kits. Not at all out of the realm of possibility for them to come to an agreement for a Zoids girls line, shouldn't be that far fetched considering the insane popularity of these megami and FAGs.

>>6225078
Get a FAG you like. Seriously. I started with Materia as babby's first FAG and I made mistakes, but I'm still fond of her. It was good practice if you're not experienced with plamo.

If you do have prior plamo experience, you could probably do any of them. Personally, I enjoyed putting together Hres more than Bunnylard.

>>6225676
What are all those heeeeaads?

>>6225752
They're the MD heads.

File: img000026.png (366KB, 763x342px) Image search: [Google]

366KB, 763x342px

>>6225105
>>6225538
Are you people even trying?

File: 21710432027223_253_m.jpg (18KB, 255x183px) Image search: [Google]

18KB, 255x183px

Got some interesting aftermarket parts from Taiwan popping up on my twitter feed.

goods.ruten dot com dot tw/item/show?21710432027223#qa&p=1

facebook /pg/EJO3GP6/photos/?tab=album&album_id=1290629797697938

Foreign orders can be done through Facebook and paypal apparently.

File: FAGTittyMonster.png (345KB, 574x730px) Image search: [Google]

345KB, 574x730px

>>6226050
I'll try for you, Sempai.

>>6226078
You. I like you.

>>6226068
Pretty interested in these, so ran a quick Google Translate on the Ruten description, only to find out that they're:

"suitable for:
Thunder, thunder and thunder, thunder venue version, Thunder, skeleton sauce, mo Ting lian, probe and so on ..."

...Skeleton Sauce?!?

Which FAG is Skeleton Sauce? I need to know.

>>6226191
Gourai, Gourai Type 10, the green Kotobukiya Gourai (I think), Jinrai, uh...

Googling 骨架醬 FAG gives pics of Architect, so I guess she's skeleton sauce. I think 茉汀莉安 is Materia, 探針等 seems to be Stylet. Maybe those are fan names or something.

>>6226191
>Skeleton Sauce
>Nickname for Architect
I like it

>>6226078
>The marines titty monster won't appear in the manga

Why even live?

File: 17016881_1290629897697928_2129203778985480249_o.jpg (281KB, 2048x1536px) Image search: [Google]

281KB, 2048x1536px

>>6226068
Ordered 4 off him a few hours ago.
$106 total, not bad.
Just waiting for his paypal address to make payment

>>6226370
That's being converted to usd from taiwanese dollars right

>>6226382
yeah, so about £86 for me.

>>6226370
Those boobs looks nicer than I thought it would
>26.50 per set
A little pricy for me right now though

>>6226451
you do get both small and large boobs

>>6226068
>ruten

URL is broken

>>6224416
Alright, Muscuto. One more chance. Still got some time to get that paypal dispute in if something else distracts him.

File: Sweaty dog.gif (3MB, 300x169px) Image search: [Google]

3MB, 300x169px

>>6225718
>FA girl: Zoid edition

>>6225752
These are the faces of MD. You must purchase each.

>>6226476
Look at the address carefully, Anon.

>>6226068
>>6226370
I fucking need those Gourai oppai but I don't do social media.

>>6226588
>錯誤代碼: 6ad78e8fbbfd,A0002,37
>對不起,找不到此商品的相關資料,請確認是否有此商品。
>時間: 2017-03-07 09:31:57

???