Revoltech General: Grab them by the tongue Edition

File: C0MGdPfUUAEVFSl.jpg (36KB, 640x480px) Image search: [Google]

36KB, 640x480px

Lots of sample photos so I'll put them together in a moment.

File: Qdr4kuf.jpg (35KB, 369x395px) Image search: [Google]

35KB, 369x395px

>>6084485

> Venom's fingers are sculpted in a curled position

Can he still do a good middle-finger?

Kinda wish he came with an alternate jaw that wasn't a huge underbite.

File: C0SRDrWUUAIXeOR.jpg (90KB, 1200x900px) Image search: [Google]

90KB, 1200x900px

>>6084513
Like that?

>>6084521
>>6084513
but I thought you wanted a MvC venom, now you dont?!?!

>>6084525

I'm not even a spidey fan, just gonna get it because it's cool.

I placed my pre-order.

>>6084517
Happy to see this now after I've placed my pre-order.

>>6084513
I said the same before. That, or a way to bring the jaw back using the articulation so the mouth can close up properly. Oh well.

How much do they cost?
Looks amazing

>>6084725

IIRC $60-100 depending where you get'em. Venom and Spidey aren't out yet though, not coming out for a few months still.

Deadpool's been out for about a month.

I'm probably not going to ship spider man until a bunch of other stuff comes in at the end of february. I can already tell this is gonna suck.

>>6084510
>>6084517
Oh these photos made it to the Marvel General. Always interesting to see the divergence of reaction between here and there from looking at the same thing.

>>6085605

Link.

I might be retarded but how does the Vulcanlog Venom Snake's bullpup rifle attach to his canteen??

Just got this figure and there's no instructions to puzzle over, so fuck.

>>6085675
Push peg out through the back of canteen (may need to remove canteen from belt or belt from figure entirely), put flat side of additional small black peg piece into the gap in the rifle, then peg into canteen slot.

File: PICT4850.jpg (190KB, 1600x1200px) Image search: [Google]

190KB, 1600x1200px

>>6085675

This.

>>6085679
>>6085680
Ah, okay so thats what that thing is for. Thanks guys.

>>6085683
Just flip it so it points at an upward angle opposite what that image show so it will sit better.

>>6085708
That's not true at all

>>6085711
>>6085680
Looking at that image looks like you lose half the peg because it's facing down instead of up where there wouldn't be a gun body to get in the way.

File: 2016-12-22 23.19.23.jpg (337KB, 1632x918px) Image search: [Google]

337KB, 1632x918px

>>6085713

>>6084485
>Gamera 1967 (Gamera vs Gyaos)
>Gyaos 1967 (Gamera vs Gyaos)
>G1 Gamera (Gamera: Guardian of the Universe)
>Gyaos (Gamera: Guardian of the Universe)
>G2 Gamera (Gamera 2: Attack of Legion)

Woah, woah, are these getting reissues? Or is this speculation due to Legion?

>>6085735
reissues i think

>>6085735
They announced it as a sub-line consisting of reissues of all the Gamera Revos, then an additional newly sculpted G3 Gamera. But that was a few events ago so not sure what's going on with it. Legion came along so I'm guessing it's on track.

Don't know if there is any Gamera projects in the works to time an release with. It's all Godzilla nowadays.

>>6085962
> Don't know if there is any Gamera projects in the works to time an release with. It's all Godzilla nowadays.

SDCC 2015 they showed some test footage for an upcoming movie to celebrate the 50th anniversary. Kadokawa has been pretty quiet about it, though, since. There's no release date or anything.

>>6084725

I'm paying $66 for it, basically half down for preorder at the shop in my city, then the other half when it arrives.

Venom looks rad! So I PreorderEd him.

>>6085979
I thought that WAS the celebration material, like that CGI Ultraman short. Sometimes they get uploaded by others as "trailer" when that short is it, so I forget which it was. Sometimes it is a proof of concept, if everyone loves it we might move forward deal as well so they say nothing at all.

Revo Bane when?

>>6086813
I rather get Revo comic book Batman first, do gargoyle pose and cool martial arts poses with ease.

File: IMG_2395.jpg (98KB, 600x800px) Image search: [Google]

98KB, 600x800px

>Spider-Man
>late January
>late
Fuck, I've never felt so impatient for a figure to release. I've loved Revoltechs since the beginning and was a huge Spider-Man fan as a kid, so this is going to be amazing. Pre-ordered Venom too.

Thanks to the anons several threads back who helped dissuade me from getting the Sci-fi Revoltech to tide myself over, my SDCC Raft Spidey is doing just fine.

File: GDS-5600_08.jpg (28KB, 600x400px) Image search: [Google]

28KB, 600x400px

I don't have much experience with revoltech, but can anyone speak to the quality of the Shin Getter 3? The arms look like they'd be fun as hell, but also like they might fall apart at any moment.

>>6087272
>they might fall apart at any moment.
Pretty much impossible. All the joints are big sturdy joints. Paint might be sticky since it's an old one, and I haven't checked mine in some time to see if this particular revoltech was one of the over used plasticizer figure.

>>6087360
Good to know. My only other revoltech was a Was a Pazer Corps trooper whose arm fell off right out of the box, so I wanted to double check before I bought another one

File: 1472727851737.jpg (59KB, 372x471px) Image search: [Google]

59KB, 372x471px

>>6084513
>>6084521

File: APOCALYPSE_001.jpg (2MB, 2152x2902px) Image search: [Google]

2MB, 2152x2902px

>>6086813

If we must get more american comics revoltechs... I'll take Apocalypse or Thanos over Bane anytime.

I've already placed my pre-order but one thing I'm hoping for is that Venom doesn't have any of the flexible, soft materials like the Metal Gear ones. I'm not a fan of how they eventually give way and rub off colors, especially for the ones with a sheen on them like Cyborg Ninja.

>>6086813
Never, fuck DC

Batman and Daredevil would be a great additions to the line.

>>6088167
I'd suck so much dick for revo Apocalypse. We haven't really had a decent Apocalypse figure, there is the Toybiz BAF but it has silly looking proportions.

>>6086813
If I twist this joint would you die?

>>6088729
I liked the MU one but yeah it was 4 inch scale. Revoltech Apocalypse would work well because of all the weapon parts you could have to swap out with the arms.

>>6088770
Very clickfully.

Yamaguchi said on his twitter that Venom is made of the same material as Raiden and Cyborg Ninja. I'm reconsidering selling it. I love the Raiden revo but Cyborg Ninja scuffs badly on his hip parts, I really dislike squishy materials being used for major parts of the body.

I'm just wondering how durable Venom will be and how much of it is made of the softer material to let him pull off the poses where he's squishing his shoulders together and such.

I mean he's nice enough to have answered when someone else asked but I also wonder how this affects the figure for me.

>>6091282
Again, I'm not entirely sure because parts of Raiden are solid plastic and parts like his lower torso and groin are made of softer plastic... I'm just being paranoid about a figure I was super excited for

>>6091282
>>6091286
I don't see the tweet you're talking about, but yes you're being paranoid. In terms of material, every Revoltech, Mini, whatever are all made up of PVC for the body parts. The softness depends on other stuff you mix into them. That's my understanding anyways. So saying Venom is made of the same stuff is like yes he is made of plastic. I assume you asked specifically if it was the same as those two?

Venom should be similar to Revoltechs that came out recently so should be similar to Deadpool in terms of hardness of the PVC.

Also Minis in general were made cheaper so QC were not so good and were gummier up to a point.

>>6091519
Never mind I see it now.

...Yeah he didn't really answer the question like you wanted him to. He just acknowledged it is the same, which to me doesn't sound like it's about the softness.

>>6087716
>A amorph alien symbiote witout perfect human jaws

WOW

File: C0rCKx0UQAAhkRA.jpg (110KB, 1200x900px) Image search: [Google]

110KB, 1200x900px

Yamaguchi says the hips are cut joints and knees are hinged as we knew already. And the ankles are ball jointed. I assume that means one of the joints used in the Minis that has a ball end. The ball jointed hips couldn't support the weight of Venom.

Being all hinges and no revo joints from hip to ankles is a bit disappointing for freedom of posing.

File: C0rNLz4UUAAODIf.jpg (78KB, 1200x900px) Image search: [Google]

78KB, 1200x900px

Ahh can't wait.

File: 001.jpg (32KB, 419x358px) Image search: [Google]

32KB, 419x358px

>>6094262
>That veiny ass
Mirin' hard

>>6094262
I mean waist to ankles

File: v1~01.jpg (345KB, 1637x1675px) Image search: [Google]

345KB, 1637x1675px

>>6094270
I'm going to stick with an action setup but the ass sculpt is a nice touch.

File: iris.jpg (80KB, 640x594px) Image search: [Google]

80KB, 640x594px

They show pics of the solid sculpts of G3 Gamera AND Iris in Figure Oh, so yes Revoltech Iris is confirmed.

I can't find a pic of the page but apparently it looks the same as the old Kaiyodo one, so here's a picture of that.

I'm curious how they will do the tentacles. Or include the flight mode at all.

I guess the reissues of Gamera Revos will go on as well.

>>6094346
Also for the nonjointed sculpts Iris is about double the size of Gamera, but who knows if that will carry on to the final revo.

Gamera revos are smaller anyways so they might.

File: webs.jpg (1MB, 4768x1792px) Image search: [Google]

1MB, 4768x1792px

THWIP THWIP

>>6094452
I appreciate that he posts pics of the figure before it's out, but I feel like he's overdoing it. Like I won't be able to come up with anything original when I get it as he's already posed it in nearly every way possible.

File: venomback.jpg (1MB, 3564x1808px) Image search: [Google]

1MB, 3564x1808px

Shoulder blades articulation looks great. They are on ball joints.

File: artist working hard.jpg (107KB, 600x605px) Image search: [Google]

107KB, 600x605px

>>6094460
>wanting to come up with something original with your toys
>by posing them
....

Maybe you should make your own toys if you want to feel like an artist.

>>6094460
>stop promoting unreleased product by showing all the cool poses.

It's not a competition, people don't go and say yeah the guy who made the figure did that pose so you are worthless. He does post them also as a guide for people who don't know how to pose.

I wish more companies would do what he does, get a better idea of the toy more than the promo pics which can differ quite a bit from the final product.

>>6094264
Why did they design the knee joint like that? They should have at least attempted to make it more organic rather than a straight edge cut.

>>6094460
Don't be a fag.

Do we have a specific date for Spidey yet, or is it one of those "it ships when it ships" ordeals?

>>6094749
Late January

>>6094472
>>6094478
>>6094746
I know it isn't a competition, I just don't want to be tired of the figure before I even get my hands on it

>>6094262

What is a cut-joint exactly? His legs haven't looked limited in the poses he' shown so far.

>>6095023
then leave the thread if you don't want to see pictures

>>6095023
Your complaints make no fucking sense.

>>6095023
Does your autism bring in the NEET bucks?

>>6095023
I legit think you're autistic

File: wolfwood.jpg (57KB, 999x837px) Image search: [Google]

57KB, 999x837px

>>6095028
It would be like MP Eva or Wolfwood to name some popular ones. Ultron's hips behaves like that as well despite using revolver joints.

Simple rotation at two points, at the hips and thighs, lets you position the legs. It's not that limiting, but there would be positions the legs can't go due to the angles of the cuts.

File: I would liberate them islands.jpg (15KB, 400x398px) Image search: [Google]

15KB, 400x398px

>>6094262

>>6084485
think this revoltech spidey will be better than the eventual figuarts? at least in terms of posing?

>>6095670
Posing, likely yes. Figuarts as great as they want to be for poseability, they fall short at certain body areas most of the time. Neck, torso and shoulders usually suffers relative to a Yamaguchi style Revoltech. When the SHFs focus on posing like the Kinnikuman series they do rely on moving the joints away from the body to get greater range, and that tends to look very choppy in the end. And even then the torso joints were not that great compares to what the Revos usually achievers with a single joint.

Also SHF Spider-Man will be a movie one for sure so if you want to stick to a classic look the Revoltech will be the Japanese action figure to go for some time. Until other places copies what Kaiyodo did...

File: 800783655275.jpg (78KB, 800x450px) Image search: [Google]

78KB, 800x450px

>>6094262
>hips are cut joints and knees are hinged
>$80

File: 20161229_022607.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

My Super Valkyrie just arrived, I'm pretty pleased

>>6095989
Huh, really? I thought those were among the revoltechs that hadn't aged well.

>>6095997
The transforming ones a re a disaster, but the battroid only ones are decent enough.

>>6095997
>>6096021
I think the transforming one works well in theory, except for the wings falling off easily. The 6mm joints were real shits then and with the proper joints they can be nice cheap VF-1s toys. They weren't that much of a partsformer like Gunbuster was. There were no white joints available but I might try it one day with all the extra AB joints.

>>6095997
you're probably thinking on the transforming ones

>>6095997
I'm mostly happy with the look.. it has nice, sturdy proportions. It's definitely not the most impressive figure ever

>>6084485
Where can I find some images of those new Assemble Borg releases you have listed under TBA?

File: CoGLt-fUEAEHBCT.jpg (184KB, 1200x865px) Image search: [Google]

184KB, 1200x865px

>>6097376
They were shown at the last Wonder Festival. I'll check for a link that has decent photos of them. Most of the pics that were posted came from twitter though.

>>6097376
Okay there are some photos here, plus other Kaiyodo products.

http://hobby.dengeki.com/event/232857/

File: 1483052156064.jpg (781KB, 1988x3056px) Image search: [Google]

781KB, 1988x3056px

>>6094452
I'm fucking excited to have him pose with Deadpool. Current run's fantastic.

I got my Revoltech Naked Jehuty and it's the [spoiler]first figure I have ever purchased.[/spoiler]
Pretty happy.
Also the lighting in my place is ass.

File: Screen Shot 2016-12-30 at 12.01.35 PM.png (2MB, 956x1228px) Image search: [Google]

2MB, 956x1228px

>>6098309
Whoops forgot the image

Anyone here have the Vulcanlog Dark Magician? How is it? I like the design, and if it's decent enough, I may just end up grabbing the rest of the Yu-Gi-Oh ones.

Also, how's the quality of Vulcanlogs in general? I only own some older Revoltechs like Krauser, Yotsuba, Optimus, and Lupin.

>>6098360
Solid overall though the only Vulcanlog issue I ran into was with Tigrex's tongue falling off the area where it holds on to very easily. Both Felyne's from Monster Hunter held up great even though holding the lance for one is near impossible for anything dynamic since the joints on the arms or hands can't handle the weight.

Sakamoto is one of those things that should've been passed over to as a figma. Venom is a solid release overall though the final release version has the eyelids or eyehole being wider than what was originally shown so he has this sort of 1000 yard stare. Ended up using warm-hot water to adjust this.

Can't comment on the other Vulcanlog figures.

>>6098360
Dark Magician is great, best of the bunch. Articulates very well and easy to get expressive poses. Among Vulcanlogs I say DM and V Snake is at the top, but hey I like Yamaguchi Revos so I might be biased. Upcoming Hunter might knock out some of them from their spots.

Also to add for the Sentinel robots Vulcanlogs, simply not worth the price but good for like 5000 yen mark. Goshogun's wrists are garbage so posing with weapons is annoying. Baikanfu is way better in that aspect, but it seems there was a last minute change to the shoulder/bicep rotation, I think most were glued together maybe due to fragile pegs. I see many folks breaking it off thinking it will rotate. The shoulders works fine enough just with the revolver joints, ending up just like the articulation setup of Goshogun. They are both bigger than the old Revoltech robots too, much more so in the modern size standards.

>>6098360
>I may just end up grabbing the rest of the Yu-Gi-Oh ones
You should
They are shelfwarming hard as fuck right now

>>6098366
>>6098394
Awesome, thank you, kind anons. I'll buy one.

>>6098487
I've noticed that, Yugi and Dark Magician especially.

Wasn't sure if that was because of quality, or if people just don't like Vulcanlogs. I saw a lot of people on mfc complaining how Kaiba and Dark Magician weren't figmas. Fucking casuals.

>>6098618
Vulcanlogs are just fine, people might be confused with the name change, and/or Union Creative simply overproduced them. And they made some weird choices in selection like 4 uniform variants for a baseball manga character.

As for Yugi, there was the figma and many went for that one instead I bet. For DM it was more due to it not being the classic design and hoping figma will eventually do that particular DM. Overall I think everyone didn't care for the movie versions.

So hey, I don't buy many figures. Is it possible to pop out joins for the purpose of cleaning them or is that pretty much just gonna break the figure?
I know over time it's gonna get dusty.

File: IMG_0162.jpg (351KB, 640x480px) Image search: [Google]

351KB, 640x480px

>>6098726
For Revoltechs and VulcanLogs, as long as they are revolver joints you can take them apart no problem. They are just held in there by friction, and has no catch keeping them in.

For RevolMini, the joints besides the wrists are not really meant to be taken out, but since the pegs and balls are harder plastics compared to the sockets they are in it's not that difficult to take them apart either.

>>6098726
yeah, the ball shaped ones are meant to be removable. infact it was originally the main point of the line so you can partswap and do cool stuff (the assemble borg line was the original idea but they went for licensed characters for fear of not being popular enough)
now there some that you shouldn't take out, like the ones from ultron's, venom snake's and deadpool's hips, since they might get loose.
just try to be careful

>>6098745
>>6098752
Good to know, thanks anons. I am pretty sure almost every joint on this except the neck is a ball joint so cleaning it should be simple.

File: 4L_iI3qflfr.jpg (813KB, 2049x2264px) Image search: [Google]

813KB, 2049x2264px

Kept you waiting, huh?

>>6099486
Can you take a picture without the NVG?

File: 4L_PQAjBZOA.jpg (1MB, 2305x2305px) Image search: [Google]

1MB, 2305x2305px

>>6099545
he's a little rough around the edges, I feel like they did a better job with Venom, but not bad.

>>6099991
is that face from the concept art?

File: kyd03024_9_1467862171.jpg (60KB, 600x450px) Image search: [Google]

60KB, 600x450px

Is Hades Pod worth $80? It looks so cool but the shipping costs are insane.

>>6097478
>>6097484
Thanks man, you're the best.

General Assemble Borg question. How often are they releasing new figures at this point? I know for a few years there wasn't much going on.
And are they kind of dropping the whole Microman-esque vibe with the clear bodies?
Final question is does anyone know of any other revoltechs/blank revo's that use clear bodies? Wouldn't mind trying to kitbash some of my own together.

>>6101048
>How often are they releasing new figures at this point?
They just released the first new one in three years and there's no ETA on the others shown last August. They also re-released a good amount of the old ones a couple months ago and they're still in stock on HLJ.

>are they kind of dropping the whole Microman-esque vibe with the clear bodies?
They've been moving away from that since 2011 with the more monstrous/mechanical designs.

>any other revoltechs/blank revo's that use clear bodies?
Off the top of my head there's a clear purple EVA-01 and a clear/crystal Alien.

File: eva0_112.jpg (38KB, 500x305px) Image search: [Google]

38KB, 500x305px

>>6101068
>re-released a good amount of the old ones
Technically it was just a clearance of their inventory stock, selling them to other stores than their own. So Nothing new was produced besides the Nexus ones.

>>6101048
Anothe clear body would be the very first Revoltech ever I believe, which was a yellow clear EVA-00 which they called the giant of light. It was a magazine mail order exclusive.

Also I'm seeing clear blue and clear purple TV EVA-00 and 01 too but not sure how they were released.

Oh and there were tiny ABJarknoids that came with some old Revos that had fake 6mm joints you needed to replace if you wanted them to move.

Any chance Deadpool will drop in price? Or should I just go ahead and snag one from BBTS for $75 right now?

>>6102012

I don't usually shop there because Canadian, but how are their sales? I think they usually only put shelfwarmers on sale.

>>6098366
>Sakamoto is one of those things that should've been passed over to as a figma.
Have you read the manga? Its just Sakamoto making JoJo-style poses all day. A Vulcanlog or Revoltech seems pretty ideal for him.

File: 431.jpg (239KB, 1448x724px) Image search: [Google]

239KB, 1448x724px

>>6102648
I have but the Revo or at least the promotional shots just made the figure just not make his eccentric poses work for some reason. I enjoy revoltechs as much as the next guy but a figma of him will probably be a decent fit if they can work a decent ab crunch with his uniform sculpt.

>>6102648
>>6102656
I think he is the only VL besides the Sentinel ones that didn`t have Yamaguchi work on the articulation, so was a little off compared to the rest in terms of the joints setup. Well Sentinel ones are just copying Yamaguchi`s old mecha Revo so Sakamoto is really the only VL so far with zero Ymaguchi involvement. At least I think it is, I don`t have Sakamoto and the info on the box about the sculptor is the most accurate one. I think Beat and Arthur are like that too.

>>6102656
Figma has that one school kid with the bike that just needs a new head to be sakamoto.

>>6098366
>Revoltech got Sakamoto and Ted
>Figma got Ninja Slayer and Berserk

Shit's all kinds of backwards.

File: 1435388353259.jpg (37KB, 500x500px) Image search: [Google]

37KB, 500x500px

I have a couple of revolmini and I'm looking for some joints just in case but I don't know what size they are.
Can anyone help me know what size I need if I were to look out for them.

>>6103111
Revolmini have dedicated special joints and the only way to get some spare ones is to sacrifice another Revolmini.

>>6102769
Figma had Ted before Revoltech.

File: 1422407431859.jpg (65KB, 350x277px) Image search: [Google]

65KB, 350x277px

>>6103372
I thought so, thanks though I'll end sacrificing my venom snake for my olive drab Snake and solid if I ever brake any of the joints.

>>6103525
You can get a cheap one like Black Hole for joints. Granted the colors might not match but they are all black joints so it wont look too bad.

File: C1JnTcMUsAAZR_-.jpg (122KB, 675x1200px) Image search: [Google]

122KB, 675x1200px

Protodeadpool

It would be nice if he did a blank body for like 3500 Yen.

>>6087272
It's one of the sturdiest revoltechs by a long shot.

>>6087272
He's the most fun out of the three main Getter figures.

>>6103749
Just a bit more work and we can have Gray Fox.

>>6100714
They are a lot of fun, especially if you have more assembleborg stuff. I'm having to sell stuff for bills and I have two of those, if you're interested in two of them for $80, let me know.

[email protected]

>>6103765
I wish they made all 3 getters for the original when they did the Renewal version of Getter 1. Getters 2 and 3 gets very little love. Include the separate jets in scale as solid display pieces with 2 and 3 and you pretty much have the best set of Getter Robos at a nice price point.

File: image.jpg (133KB, 600x800px) Image search: [Google]

133KB, 600x800px

>>6103847
I'm excited for the Dino Getters, though Goshogun and Baikanfu were kind of flops...

Revo is superior to the Sentinel release since it has more than just the half open hands, no transforming I don't believe though. Dino Getter 2 was hardly articulated, so a Revo would be nice for him as well. Hopefully they get that far.

File: o080005521279329149470.jpg (53KB, 800x552px) Image search: [Google]

53KB, 800x552px

>>6103884
Baikanfu was okay. This Dino Getter would be much better since it looks like it fixed one of the biggest flaws of the first two vulcanlog mechs, and use the 6mm joints for the wrists.

Not a big fan of the designs though so I wish they will move on after 1 for this one...like 90% of Getter releases.

I`m not sure if the Sentinel vulcanlogs should keep going as it is. Either go for more mainstream stuff and get the price lowered, or something unique nobody else would make, which the Dino Getter is a good sign.

One cool thing they could do is make that Sentinel mascot robot, would be one of a kind and don`t have to pay up licensing fee so might be cheaper in the end. Another thing they could do is something nostalgic and popular others haven`t done recently, like the Eldran series robots so it can be mass produced and be cheaper.

Yamaguchi seemed to have hinted a new robot Revo so there`s hope of some return to the good old days.

File: Cw6Y7pWUkAAaP4z.jpg (128KB, 1200x900px) Image search: [Google]

128KB, 1200x900px

>>6103945
God I would love some Revos of Eldran or Brave robots. There have been some really nice customs people have done that really make me want to see what Yamaguchi's take would look like.

File: 1442739374645.jpg (35KB, 415x481px) Image search: [Google]

35KB, 415x481px

>>6103616
Yeah, I was looking at a couple on bbts and amazon which I will end up using for fodder.

File: IMG_20170102_223349.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6104883
>>6104883
>>6104883
Gf

File: KAIYODO ROBOT GAOGAIGAR KING 2.jpg (58KB, 640x478px) Image search: [Google]

58KB, 640x478px

>>6104356
There are customs like that because he use to make Gaogaigar figures. Bandai loves the Braves so that's why I think Eldran is more likely to be explored by others. And the Sentinel ones so far are pretty blocky looking.

File: 1291_1.jpg (80KB, 363x428px) Image search: [Google]

80KB, 363x428px

>>6104975
He did some really badass resin kits too.

>>6105009
kinda sexual in a way

File: IMG_20170102_223757.jpg (2MB, 3480x4640px) Image search: [Google]

2MB, 3480x4640px

>>6104896

File: IMG_20170102_224354.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6105285

File: IMG_20170102_224528.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6105286
>>6105286

File: IMG_20170102_225217.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105287
>>6105287

File: IMG_20170102_225504.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6105292
>>6105292

File: IMG_20170102_230035.jpg (2MB, 3480x4640px) Image search: [Google]

2MB, 3480x4640px

>>6105293

File: IMG_20170102_230552.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6105293
>>6105295

File: IMG_20170102_230847.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105299

File: IMG_20170102_231124.jpg (3MB, 3480x4640px) Image search: [Google]

3MB, 3480x4640px

>>6105302
>>6105302

File: IMG_20170102_231347.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105302
>>6105302
>>6105306
>>6105306

File: IMG_20170102_232529.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105309
>>6105309

File: IMG_20170102_232617.jpg (2MB, 4640x3480px) Image search: [Google]

2MB, 4640x3480px

>>6105312
>>6105312

File: IMG_20170102_233409.jpg (2MB, 3480x4640px) Image search: [Google]

2MB, 3480x4640px

>>6105313
>>6105313

File: IMG_20170102_233754.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105314

File: IMG_20170102_234301.jpg (3MB, 4640x3480px) Image search: [Google]

3MB, 4640x3480px

>>6105319
>>6105319

do the queen's blade figures leak plasticizer after a while?

>>6104883
>>6104896
>>6105285
>>6105286
>>6105287
>>6105292
>>6105293
>>6105295
>>6105299
>>6105302
>>6105306
>>6105309
>>6105312
>>6105313
>>6105314
>>6105319
>>6105322
jfc

>>6105458

samus snake otp

File: godsentinel.jpg (115KB, 425x600px) Image search: [Google]

115KB, 425x600px

>>6103945
Full body view if anyone was wondering. I like how the weapon is the 糸 part of the "Neru" kanji and the gold bits has the other kanji parts.

Kind of wish toy companies went more aggressive with original stuff like AB or Kotobukiya's FA

Where's the best place to preorder the venom?

>>6106291
HLJ

>>6106314
Any reason why them over BBTS or Amiami?

>>6106319

Not that guy, but BBTS is more expensive and amiami has shit customer service if you have a problem + you cannot cancel your order.

>>6106319
Yeah, >>6106334 is right.

>>6106334
>you cannot cancel your order.
Well, you can, but there's a 9/10 chance they'll ban your account.

>>6106347
That's not true at all.

I've cancelled numerous orders you just don't have to be an autistic idiot to constantly order and cancel constantly.

>>6106334
I'd honestly forgotten how much of a pain amiami is, and not just being able to cancel stuff. I ended up having to go with them for some stuff hlj didn't have, and even just being able to ship things whenever I want is a godsend. "Hey these two toys came out a week apart, but in separate months? too bad, we're shipping them separately now gimmie 25 bucks per box."

File: 1359694880651.jpg (25KB, 300x300px) Image search: [Google]

25KB, 300x300px

>tfw just got first Revoltech fig

Tell me about these fucking joints. I'm constantly afraid of breaking them and my fingers are ready to bleed over it. Is this normal for Revoltech? Do you need to re-seat the whole peg to get a joint to move on another axis?

>>6107365
What exactly is the problem you are having? The joint has two pegs on either end and you should function as swivels unless they are stuck. If they are try applying some heat or pulling it apart and re-assembling a few times until it loosens up.

To utilize the swivel you must hold the joint with one hand and swivel the parts with the other hand. They are fairly stiff and that's by design. You would have to use a lot of force to break these things because they are pretty robust joints.

File: FIGURE-023286_13.jpg (83KB, 800x800px) Image search: [Google]

83KB, 800x800px

this guy is releasing this month right?

>>6107382
Should be.

>>6107365
To swivel the joints properly make sure they are not in a straight position because then twisting either ends of the connecting body parts you can't control spinning the joint in the correct position. bend the joint a few clicks so the two pegs are on some angles, that way you have control over the direction of the joiht.

And yes if it's too tight just blast the area with hair dryer.

>>6106334
>shit customer service if you have a problem
Nice meme.

>>6105451

pls answer

>>6107365

replace them with figma joints

>>6107446

> sorry about that defective figure, here's 500yen back.

>>6107512

File: IMG_625511.jpg (230KB, 756x1008px) Image search: [Google]

230KB, 756x1008px

>>6107512
My don't. I own pretty old ones like Melona and Echidna and they dont have that problem.

>>6107374
>What exactly is the problem you are having?

I'm guessing since it's a new fig the pegs are just incredibly tight, trying to swivel them by levering a joint at an angle causes them to look ready to snap. Takes a lot of careful force.

Thanks for the responses.

>>6105322
I'm always happy with people posting pics, but I feel like at some point, you should've just made a webm slideshow.

>>6107969

I like the pics. It keeps the thread a bit more lively. Besides, we're nowhere near an image limit anyway.

File: IMG_2763.jpg (39KB, 550x539px) Image search: [Google]

39KB, 550x539px

>waiting for Spider-Man
Revoltech has always been my favorite toyline since the first Transformers releases, and Spider-Man has always been my favorite comic book hero.

Still can't believe this is happening. The SciFi one looked pretty bad, but this new one looks great.

>>6110986
I'm in the same boat my boy, although i haven't been a fan quite as long. My first revoltech was the Grey Fox revol mini and while he's one of my favorite MGS characters i still thought "it would be badass if we had a Spider-Man like this" and it's COME TRUE

>>6110986
>Still can't believe this is happening
Since Yamaguchi likes to keep making the same characters and he made the box figures of Spider-Man years ago, the chances were high. Macross, Getter, Gunbuster, DMC, Trigun, Evangelion, etc were all IPs he made figures for long before Revoltechs came along.

Still waiting on those Virtual-On, Jinki and DOA Revoltechs. Any day now. Such high demands. Joking aside female and fighting game Revoltechs should be more commonly made. Votoms came pretty close with the reveal of the nearly finished prototype sculpts which greatly saddens me.

Honestly I'm surprised it took this long to make another Spider-Man and Venom because it's such a hot property compared to the ones he hasn't revisited, and likely never will.

>>6100714
BBTS Has them 70
I just got mine today, lots of fun, just be aware, it took me 1 hour to put together and my fingers almost broke

>>6103846
Do you happen to have any different ones you are willing to sell?

I need posing ideas for Deadpool. Got any ideas?

>>6112712
Hhhhmm, now where in the world could you get ideas on how to pose a COMIC BOOK character? Just don't know man...

>>6112716
Don't reply to Red anon.

>>6112716
Thanks.

File: 1450766832302.png (539KB, 1050x700px) Image search: [Google]

539KB, 1050x700px

>>6111095
Okay but does this mean we're getting a Dante redux?

I would murder for a Dante with modern revo technology.
There's also rumor DMC5 is in the works, so it might be wise to pump out a Dante and Vergil to coincide nicely with that.

>>6112777
>rumors
Stop. It's like the 3rd year this is a rumor

>>6112777
Not really since he did Dante day one. I'm talking about the DMC figures he made before Revoltechs.

Okay so BBTS has venom for like 80 something bucks. HLJ has has venom for 58 or something but international is probably expensive on it

who should I order from? I dont order shit from japan so I have no clue about prices

Does anyone have pics of frankenrevol Alien Girls?

>>6114041
Hlj.com
Shipping will be like 20 dollars or less if you are from the states

>>6114041
If you know another product of a similar size you can throw it in your cart on HLJ and check out the shipping calculations.

>>6105451
>>6107512
Everything will leak plasticizer after a while. How soon depends on the quality of the paint/plastic/sealant and the condition the figure is kept in. Soft/rubbery plastic and glossy paint are more prone to leakage so I'd only worry about their removable clothing parts. The matte painted parts should be fine, but there's no way to know until you open the box.

>>6115379
Actually, it has nothing to do with the quality. It's actually based on the design, era, and research. Sometimes it's just purely by accident, since a lot of toy companies don't hire chemists/engineers to test how plastics/paints will react with one another or over time. So you can have a very high quality plastic that has been tested and a very high quality paint that has also been tested, but never together, and you end up with a sticky mess two years later.

I should also note that how your toys are stored also affects how the plasticizers will leak out and what effect they will have on your toy. Normally, plasticizers are released as a gas and disperse into the air. This is why most of the plastic stuff you own seems to have no leakage. With certain toys, paint/texture can slow the offgassing to the point where it will condense on the surface but also storing it in an enclosed area for too long can stop the gases from being released into the air and will instead settle back onto your toy.

Also, rubbery toys only seem more prone to leaking because they contain more plasticizers.

>>6115505
>purely by accident,
I also think a lot of times the Chinese factories mixes in more plasticizers or go with cheaper analogs on purpose to skim money from their clients.

By quality I think anon means the softer, gummy plastic, which is as you said done so by having different substances mixed in to make it less brittle.

>>6105451
Even with Queen's Blade they made the change to harder plastics with later versions. Like the boobs on older ones were much softer even for the same character. They are aware of it so re-issues are usually okay.

>>6115622
>Chinese factories
More plasticizers would be more expensive.
Alternatives might happen though.
>By quality I think anon means the softer, gummy plastic
Which has nothing to do with quality. Stuff like silicone can be very rubbery, yet won't leak plasticizers like vinyl does. Other soft plastics also don't have the problems pvc can have.

>>6112631
I sold the rest, only have two Hades Pods left.

>>6103884
>Revo is superior to the Sentinel release
Kill yourself, find a way to get resurrected and then kill yourself again.

>>6115743
>not turning into a ghost and start pestering you while you sleep with "revo is better than sentinel" for all eternity till you yourself out of madness

File: 2016s.jpg (529KB, 1156x1440px) Image search: [Google]

529KB, 1156x1440px

Maybe do one of these, although results seems clear-cut.

I put together the "new releases" of 2016. I threw the AB bike in there because I think it's under the new Nexus branding now, first time available at retail, and was reproduced for the release. Those other ABs were old production leftovers collecting dust in Kaiyodo's store so I think should be excluded.


I can't really decide which I like better, Venom Snake or Deadpool, but 3rd place goes for Mark 45 Iron Man then closely followed by Black Magician. I got most of the revos of 2016 but wasn't really impressed with anything else.

Which were your top favorites? Which ones did you get? What revoltech are you looking forward to the most for 2017? Assuming ones listed will come out...

>>6117552
I just realized the only NEW revo I got last year was Deadpool. And he's fantastic, but.

Looking forward to Spidey and Venom.

>>6117552
The only new Revoltechs I've gotten in 2016 were Yugi, Kaiba, and Blues Eyes Alternative Dragon, though I need Black Magician to finish off the Yu-Gi-Oh set. I like them all equally, really liking the movie designs.

Missed out on Deadpool pre-orders, unfortunately but I got one in for Spidey and Venom, so I'm stoked and looking forward to them as well as Beat.

>>6119164
Black Magician is a whole another level better. Much more poseable than you would expect.

File: dc6e0-3.jpg (170KB, 1600x900px) Image search: [Google]

170KB, 1600x900px

>Get the KT Revoltech Skeleton
>Put it's arms on my Revoltech Skeleton Warrior for shits and giggles
>The joints from the KT skeleton work with the Warrior skeleton 100% better

What gives?? Now I just wanna buy the revoltech joints that are the same size as the ones used in the KT skeleton so I can switch them out on my Skeleton warrior so it's not a loose mess.

But they gotta be grey and the right size, how do I know the size of the joints on the KY skeleton?

>>6122000
?? Revoltechs always use the same joints so no shit. So you want the 4mm joints, they don't sell them or come as extra with anyone so you just have to get it off of other Revos. Also they haven't really changed in quality over the years either.

Sites like amiami lists how many of what joints are used in a Revo.

I'm not sure those joint sets for plastic models etc goes down to 4mm.

>>6110986
>ya'll got anymore of them Spider-Man Revoltechs?

>>6117552
Who is that little cat nigga in the armor?

File: _20160509_103619.jpg (829KB, 4553x2370px) Image search: [Google]

829KB, 4553x2370px

>>6123036
http://www.amiami.com/top/detail/detail?gcode=FIGURE-015557

He's a fun little figure but a big pitfall he has is the fact he cannot hold his lance in many poses since the wrist and elbow joints barely hold it up. I recommend him but I found the Melynx (or the black cat) to be a little more posable.

>>6122117
>Revoltechs always use the same joints so no shit
I know. I'm surprised that using the joints from the KT skeleton on the warrior skeleton fit 1000x better than the ones the warrior skeleton actually comes with

>>6123144
That's just the margin of error so to speak of the pegs and sockets. Reshaping with heat should have the same effect.

File: image.jpg (150KB, 1200x900px) Image search: [Google]

150KB, 1200x900px

Anyone else excited for this?

>>6124714
I am. Yamaguchi made heavy armor knight with big sword, can't wait.

>>6124714
I'll wait on the 2ch shots but later on. I need more Hunters in my life.

>>6124714
Nope....but getting excited for Spiderman and eventually Venom.

http://ameblo.jp/tokusatsurevoltech/entry-12237701697.html

Looking pretty good, all things considered. Also, I think you can definitely tell the mid-shin joint is the normal clicky type, which I donno about.

File: file.png (792KB, 634x736px) Image search: [Google]

792KB, 634x736px

I finally got one of my most desired grails today!

File: file.png (1006KB, 830x696px) Image search: [Google]

1006KB, 830x696px

He came with this strange trinket. I wonder what it does?

File: file.png (771KB, 581x766px) Image search: [Google]

771KB, 581x766px

Oh, it must have been a SCIENCE trinket. It's time for SCIENCE!

File: file.png (923KB, 581x880px) Image search: [Google]

923KB, 581x880px

okay maybe that's a bit too much science

File: file.png (1MB, 825x766px) Image search: [Google]

1MB, 825x766px

YOU FOOLS, NOW HE'S TOO POWERFUL

File: file.png (821KB, 464x980px) Image search: [Google]

821KB, 464x980px

WHAT HATH SCIENCE WROUGHT

File: o0600063913844517487.jpg (49KB, 600x639px) Image search: [Google]

49KB, 600x639px

>>6126055
jfc

>>6126060
It's the Revo Coin, used to come with every Revoltechs. You could send them in for prizes (basically more Revos or exclusive ABs) but they stopped that service a while ago.

File: o0300079213844517268.jpg (106KB, 300x792px) Image search: [Google]

106KB, 300x792px

>>6126055
I love the fact they went overboard with the box

>>6126055
We knew about the revo joints in the shins for a while, and the beauty of it being a revo joint you could just not touch it and it will stay straight. Or did you want it to be a smooth joint?

I read before that the ankle joints are suppose to be ratchetless but not mentioned in the review here.

Now that claw arm stand is the norm I wish they didn't put the 3mm hole right on his back symbol though. If the red paint I have is close enough I might plug it up with 3mm plastic stick with a red tip.

Did someone ever made Spider-Man figures with magnets in the hands and feet, like Microman used to do? Seems like a no brainer.

>>6126183
>Or did you want it to be a smooth joint?
I was hoping for a balljoint like deadpool's hips. As stiff as revoltech joints are, there's always a little give to them, which could get compounded when you have three of them from the knee down. As long as it works though, I don't really care.

>Did someone ever made Spider-Man figures with magnets in the hands and feet, like Microman used to do? Seems like a no brainer.
I'm pretty sure one of the pre-marvel legends toybiz spideys did. Also one of mafexes, it came with a metal diorama type display.

File: spidey mag.jpg (17KB, 300x400px) Image search: [Google]

17KB, 300x400px

>>6126195
Toy Biz made more than a few Spider-Mans with magnets, some of which came out after the ML line existed.
Just so you know, there was almost always an XMen and spider-man line every single year alongside the ML line, plus movie/cartoon lines.

>>6126066
>thiccccc

File: IMG_3838.jpg (287KB, 1171x1171px) Image search: [Google]

287KB, 1171x1171px

Nothing to add other than pic

>>6127107
For some reason I really like this pic. It feels so... homogenous? With the lighting, background, posing and focus. It's not amazong by any means, actually kinda basic but it just 'works' in a comfy kind of way.

>>6127217

Its an oldie. Most pics I used to take from when I was learning toy photography are kinda hard to look at but I always liked this one

>>6126083
Are these pictures of the actual finished and ready-to-ship product that we're gonna get?
I'm asking because I'm really liking the finish on this. I would've been okay with the very glossy look but this is pretty much perfect.

>>6128327
Yes. When they do picture reviews like this on their blog it's the final product. This is the figure we are getting.

why does eva unit 02 cost 45 bucks on bbts but spidey 75? huge price gap

eva bring a bunch of accessories too

>>6128496
combination of licensing costs and plastic being more expensive these days

>>6117552
I got Venom Snake, Stitch, the two Felines, Mark 45, and Deadpool.

The best executed figure for sure is Stitch as he can do mostly everything the character needs to do.

>>6128504
Stitch was well made, just wished it had ray guns or the alternate red suit version. They tend to do multiple versions for the cute characters stuff it feels like a missed opportunity.

Anyone have any suggestions to tighten deadpool's eyeholes? The yelling face is fine but none of his eyes will stay securely in the regular one. I've tried pledge but it didn't seem to work.

>>6130489
Heating the whole head with the eyes in sort of works for me, but since I have extra and didn't want to lose the default eyes I just glued them in for now. Thickening the peg with glue should work too, but it's all so small with very little contact area I know it's just a matter of time before you notice the eyes are missing and have no idea when or where it happened.

They really should improve the hold power on those pieces if they want to continue this feature.

>>6130543
That same thing happened to me, I was putting his swords away after I took some pictures and I noticed he was missing an eye. Took me 5 minutes of searching around the floor to find it. I was thinking about gluing them in since I rarely use the feature, but fuck me, that feels terrible.

I'm hoping he gets it together on spider man.

File: FEW-GR004img2.jpg (129KB, 800x479px) Image search: [Google]

129KB, 800x479px

>>6087272
best getter
if i ever win the lottery this'll be the first thing i buy

I pre ordered spidey but I'm a little short on cash for venom right now, will I still have a chance in a couple of months?

>>6132982

Where are you preordering things from that makes you pay up front?

>>6133051
They don't, I just don't want to preorder stuff I don't know if I'll be in the position to pay for

>>6132982
If you're so short on money that you need to think about these things, you really, REALLY should not be ordering toys.

You would be better off putting your money in an emergency fund that should cover your living expenses for 6 months. Only after that you can start spending money on useless stuff.

>>6133091

Just preorder from somewhere that lets you cancel

Contents of the Fukubukuro (not sure how to translate it, but it's end-of-year blind bag deal, aka selling leftovers no one wants) came up.

http://figsoku.net/blog-entry-52035.html

10k Yen bag looks alright, 5k bag....

File: DSC_2060.jpg (119KB, 663x1000px) Image search: [Google]

119KB, 663x1000px

>>6126058
>>6126060
nice
how much did you get him for?

Revoltech Trico...?

Revoltech Jojo...?

>>6135612
Yeah I wouldn't mind another company taking a shot at the main JoJos

File: 1422805388818.png (697KB, 882x1300px) Image search: [Google]

697KB, 882x1300px

>>6135569
>>6135612
u kno

>>6136303
Oh, this panel strangely makes me want to read the series. I'm so used to seeing more intense panels posted (not that I dislike the action).

>>6126060
>>6126167
even if the service was still going, I don't think it was easy for Americans to benefit from it without resorting to proxies/middlemen or something like that. But I could be wrong on that, been way too long since I last heard about those things.

How long until amiami asks for me to pay for Spider-Man?

>>6138684
>yallgotanymoreofthemspidermen.jpg
I've got a bunch of other stuff that I'm waiting on him to ship, too. Probably next friday though.

>>6136303
>Revo Guts in his Berserker armor and white streak of hair
If they ever do that I'm shitting my pants. It would be fucking amazing.

>>6136436
You should definitely read the series, it's overall stunning and engrossing. You should use mangasee to read the big scans.

>>6138760
Do people like all the magic stuff? I feel it got to that jumping the shark we are in for extending the story to sell more books phase with all that. Kinda lost interest, like it's less hardcore now.

>>6138786
I dig it just for the visual elements but the waiting game is what hurts the most.

>>6138786
I like it. I like both the early gritty-fantasy set up and then a certain character promising that he'll change the world and it did indeed change. I enjoy both early and current Berserk, I just hate the figma pricing for their figures and how quickly their joints get loose compared to revoltech, though I'm not sure if revoltech would be getting the likenesses as well as figma does.

File: PhotoGrid_1484372707039.jpg (3MB, 2560x1920px) Image search: [Google]

3MB, 2560x1920px

>>6117552

Was a tie between Snake and Deadpool for me as well. Then I heatwarped and repainted Snake's head and he's my #1

>>6139261
Christ, I wish I could paint. I did the eye trick, but that's about the limit of my abilities.

File: 1448380564449.jpg (91KB, 450x615px) Image search: [Google]

91KB, 450x615px

>>6138760
Frankly I'm surprised it hasn't happened yet. An anime and a game just came out, and the manga is coming back out of hiatus sometime soon, so it's not like Berserk isn't popular. And it's not like there's much competition in the 1/12 scale besides the older figmas, which are all overpriced as fuck right now. I think the 1/6 scale stuff is also pretty expensive.
I guess we can keep an eye out at WonFes; I don't think Yamaguchi's line is exclusively American comics anymore.

Also holy shit think of all the weapons they could pack in there if they went all out.

>>6138786
I don't mind it. I think people just associate the introduction of magic with the hiatus, since Schierke joined shortly before we got on the boat.
But yeah, we haven't seen anything really fucked up since like the Kushan birthing machine. Granted, we've just been sailing around for a while, but I do expect shit to go down at Elf Island.

File: Cyborg1461758007r1461903962.jpg (212KB, 900x900px) Image search: [Google]

212KB, 900x900px

>>6139396
Now that I think about it, are there many figures that take advantage of Gut's arm canon as a display piece? I think the figma had it but I would imagine the Revo adding on an effect piece to emphasise the look sort of like how Ironman MK45 has those neat smoke effects for repulsor blasts.

File: C2mjVB2VIAACAho.jpg (167KB, 900x1200px) Image search: [Google]

167KB, 900x1200px

https://twitter.com/HobbyLobbyTokyo

Reissue. 5/27.

>>6139463
It's nice that people who missed him will have a chance to pick him up. On the other hand, fuck everything if they fix the shitty sword pegs and I have to buy him again to have toy that should have been fine out of the box.

>>6094346
here ya go

>>6112236

>>6106347
>9/10 chance
wut

I cancelled my spidey preorder with an apology and they just sent the standard warning letter

>>6139463
Oh I was about to post that, nice.

So would be interesting to see if the usual sites will sell him international this time.

I think the brand name change to Amazing did the trick, but not sure if Kaiyodo will risk things since it's still the same figure that had some sort of legal issue.

>>6106363
>>6139523
We've been over this again and again for years now. For the final time--

Canceling at Amiami is a crap shoot. Maybe you'll get lucky, maybe you won't. We used to think it was tied to things like how often you shopped there, how much you spent, and how polite you were, but then we had some incidents that clearly didn't follow that example. The only thing we know for CERTAIN is that Amiami frowns on canceling preorders. Maybe you'll go your entire toy-buying career being able to successfully cancel things, or maybe the next time they'll ban you and blacklist your credit card and address.

It's Russian roulette, basically. You can spout all the "but I never got banned!" stories you want--you never know what's coming with the next pull of the trigger.

>>6139514
Cool, thanks. The text does make it sound like all the Gamera reissues will go as planned. Fairly poseable Iris would be a fun toy.

>>6139396
>I don't think Yamaguchi's line is exclusively American comics anymore
They said day one in promo material that they intend to do non Amecomi stuff.
I think Yamaguchi is working on some robot now so that's most likely not American.

On Berserk, I guess. I think I didn't like it as much because it became too Shonen manga with all the companions. Maybe someone at Kaiyodo dislikes Berserk, or don't want to step on IP figma is doing because the CEOs know each other well. For instance the big properties they don't care but more niche stuff they leave each others alone?

>>6139625
and? nothing you said contradicted my post.
>You can spout all the "but I never got banned!" stories you want
and conversely, you can spout all the "they banned me after one cancellation request!" stories you want. '9/10 chance' is a stupid statement to make when evidence exists to the contrary. many people have cancelled multiple times and still haven't been banned.

crap shoot, "maybe", russian roulette etc etc =/= 90% certainty of being banned.

>>6139777
>crap shoot, "maybe", russian roulette etc etc =/= 90% certainty of being banned.
Fair enough, since I wasn't the one who said the 90% statistic in the first place. That Russian roulette post was my first post in the thread.

Is there a concrete release date for Spidey yet?

>>6139806
Not concrete but Amazon Japan is telling me 1/28 from some shop listings so take for what you will.

>>6139782
oh I wasn't implying you were the same poster. I was just informing you that you're flinging your irrelevant feces at the wrong party.

>>6139829
My post was directed just as much as him as it was at you though, even though I didn't directly quote him. Look back at it, I didn't validate his percentage claim in any way, I simply said that past examples have proven that there are no rules and you are taking a leap of faith every time you cancel something.

tl;dr: I didn't side with either of you.

Just got my Glavenus hunter payment request from amiami, can't wait

>>6139831
I didn't imply you were siding with anyone either. And again, nothing you continue to say contradicts my posts. You just waded into the middle of something and regurgitated shit using your keyboard, as if you're imparting some grand knowledge that the people you're directing it at don't already know it.

Again, all I'm saying is your posts don't validate or invalidate anything and are irrelevant to what I said as I was addressing a stupid '9/10 chance' claim.

>My post was directed just as much as him as it was at you though, even though I didn't directly quote him
next time, quote all the parties you plan to shit on or don't quote anyone at all.

>>6117552
I didn't know there was a Sakamoto figure. Gettin that shit!

>>6119164
Is BEAD good? I love me some Revoltech dragon/monster figures and I'm thinking of getting that or Tigrex

>>6141600
Tigrex is pretty solid and poses pretty well for that design. My only nitpick is he could be a little bigger.
>BEAD
If you mean Revo Beat then he's not out yet

>>6141625
Woops, mis-read. I heard from other anons Blue Eyes was a decent release but I wish they would go back and do the classic designs.

>>6141631
Gearfried the Iron Knight would make for a perfect Revo. Would also love a Jinzo.

File: Jinzo-TF04-JP-VG.png (386KB, 544x544px) Image search: [Google]

386KB, 544x544px

>>6142201
I'm down for that but I'm always a sucker for Relinquished for a revo release. YuGiOh is just one of those properties you have a field day for releases.

>>6139261
It's amazing anon. Any tutorial? What paint did you use?

>>6139261

Can you use acrylics on toys like that or do you need to use some other kind of paint?

[spoiler]Wargamer asking, I've got a lot of Vallejo and P3 paints collecting dust..[/spoiler]

ayy whens spidey

>>6139261
>>6139277

Heatwarp how?

>>6142674
Mini games paints are the best in the industry, so you're good with what you have.

Just be sure to seal it with a clear coat afterward, because you will be handling the figure much more than you would with a mini.

>>6142759
If you heat up his face and then squeeze top to bottom around the eye, it'll give him a little bit of a squint and hold in place. His eye is too wide out of the box, he has a thousand-yard stare.

>>6142547
>>6142674

I use a mix of artist acrylics. Cheaper than the hobby stuff and one tube / bottle lasts forever.

Mr Super Clear is my choice of sealer.

>>6142759
>>6142776

Yeah I did the eye squeeze. I also pushed in the sides of his head so it isn't so squared. Makes his face more elongated and looks more like the game model.

File: 4656.jpg (72KB, 416x416px) Image search: [Google]

72KB, 416x416px

>>6142224
So many cool monsters.

Also, gotta have a Buster Blader.

I got the Raiden revoltech, but his shoulders and hips are so stiff I can't put him into any cool action poses. When I tried moving one of his arms, the joint actually popped apart. It took a while to jimmy it back together and I've given up on trying to do anything with his arms.

>>6143988
That's really weird, I own both color versions of him and I haven't experienced either of those. Can you go into more detail about joints being stiff? The hips are the standard joints they've used for ages, and the kind on the shoulders are too loose, if anything. Do you mean the actual ratcheting part of the joints (the clicky part) are stiff, or where they go into the socket and swivel? A little heat will fix that last one.

And I've had joints pop apart, but only on the really old ones.

>>6143988
I suspect a lot of your difficulty is because the pegholes are still very tight and not broken in yet. Pull the figure apart and use one of the bigger, sturdier joints (like say, a knee or hip joint) bent into an L shape to sort of "break in" all the pegholes. Stick the peg into each hole and rotate it around to loosen them up some.

Unless you're talking about the clickiness when you say "stiff." In which case, that's just how Revoltechs are.

>>6144002
It's the swivel where the joints are attached to the parts(into the arm and into the shoulder/trapezius).

>>6144007
Ah, all right. Thanks.

>>6144010

If you're in some kind of frigid winter that may be messing with your plastics too. Lubricate the joints with some shock oil or stick grease.

>>6144014
What you should really do, and this comes up too many times, is heat blast the area with the joint pegs onside the holes.

Turn the joint peg where you feel the most resistance, and then blast it with hot air or hot water. The softer plastic hole will reform to the harder plastic of the joint peg, making the movement smoother.

If too loose, do the same thing with the joints out, will expand the plastic of the hole.

File: FIGURE-019879.jpg (95KB, 600x600px) Image search: [Google]

95KB, 600x600px

>>6139463
http://www.amiami.com/top/detail/detail?scode=FIGURE-019879-S001

File: DSC00925.jpg (268KB, 936x1062px) Image search: [Google]

268KB, 936x1062px

>>6139261
Seeing this made me take him off the shelf, and man, he's maybe 85-90% my perfect toy. If he had hips closer to deadpool's he'd be so fucking amazing. The shoulders aren't great either, but I'm not really sure how I'd change them. He's still pretty good as is, though.

File: DSC00945.jpg (326KB, 1355x907px) Image search: [Google]

326KB, 1355x907px

>>6144742
Raiden's pretty slick too.

>>6144707
Just saw this and ordered.
Is it a re-release? I thought this was the one ami stocked last year but quickly stopped shipping to the west over something like copyright issues.

>>6144805
It's a reissue, same figure from last year. Pulled down for an unknown reason, but speculated to be the name "Amecomi - American Comis" cause they changed the name afterwards and Spidey and Venom were oked

>>6144822
Definitely that, DC had a line of statues with the same name so probably they got stingy

Up on HLJ too

>>6144822
>>6144860
I think so as well, but it's dumb because Deadpool's brand name was changed in the end to Amazing so the cause of the issue never existed, at least physically.

>>6144742
What gun is Venom using in this pic?

File: DSC00928.jpg (250KB, 778x1162px) Image search: [Google]

250KB, 778x1162px

>>6144918
The m16 or whatever from figma snake. I sort of didn't like the spacegun V comes with.

File: FuckingCat.jpg (143KB, 599x600px) Image search: [Google]

143KB, 599x600px

>still no news of Legacy stuff from the poll months ago

Affordable Melona is never going to become a reality, is it?

>>6145034
Pretty sure Turtles and Woody were it. And I feel like those were already picked before poll results...

>>6145034
Well, the turtles got re-released if that counts.

>>6144625
This.

is spidey released yet

>>6146549
28th

File: hj07.jpg (207KB, 823x1200px) Image search: [Google]

207KB, 823x1200px

>QB reboot

Now or never Kaiyodo.

Maybe we will get some reissues? At least there's an excuse now.

>>6146952
They somehow look more generic and samefacey now. I mean, they were probably somewhat samefacey before too...maybe I just don't like this new style.

>>6146973
Before they were designed and drawn by several artists. This one they are all being redrawn and retouched by the same guy.

>>6146952
>Not having Oda Non in charge of the redesigns

What a waste

>>6147049
He only draws one type of women so I don't think it will work, or do you mean just designing? I think the idea here is to not change the original designs too much.

>>6146952
wtf I love nowa now.

File: 1406751569815.png (85KB, 379x298px) Image search: [Google]

85KB, 379x298px

>>6124714
>Monster Hunter revos
I am so late on the boat for this but that Hunter looks too good to pass up.

>>6147783
Is it even out yet? You could probably still grab a preorder for it.

>>6146952
Reboot? What's going to be called?

>>6148007
...That part is in English.

>>6146943
>tfw the deadline for my HLJ private warehouse order is the 27th

>>6095347
I've been trying to sell my Wolfwood for a while now...
>>6094462
I don't give a fuck about revol spidey but venom looks sick. What size Is he compared to like... figuarts?

New thread >>6148121

File: 911tKte1vOL._SL1500_.jpg (403KB, 1500x1500px) Image search: [Google]

403KB, 1500x1500px

>>6148119

this thread STINKS