Revoltech General: Cool! Cooler! Coolest! Edition

Sakamoto gallery

>http://nov.2chan.net/y/res/3565531.htm

>literally a bishounen school student
>not figma
dropped the ball

Accidentally posted this on the old thread, didn't catch the new one right away:

Anybody else having flimsiness problems with Ultron's shoulders? Would you recommend just locking the movement of the first ball (the one that goes to the torso) shut with super glue to improve stability?

Also, any tips on handling that nightmare of a hip joint system would be much appreciated.

>>5872040
Ultron is pretty massive for a revo, and the joints they use for the shoulders weren't really made to support arms as large as his. I can see where you're going, but I think actually gluing them is a bad idea though. Maybe try something non permanent first like floor polish?

The hips are straight up take it or leave it. They bug the fuck out of me, but I've long since stockholm'd into dealing with it.

>>5872040
pry that one apart and stick some paper in there to gum up the ratchet.

>>5872046
>Maybe try something non permanent first like floor polish?
Yeah, I think I'll go ahead and try that. Kaiyodo really should've engineered new, stronger joints for this section, though.

>The hips are straight up take it or leave it.
That's what I was afraid of. Oh well.

Thanks for the answers! Man, Ultron epitomizes my love-hate relationship with Revoltech. A seriously kickass rendition of a character, marred by even more serious issues.

File: Screen Shot 2016-08-23 at 8.22.08 PM.png (295KB, 555x686px) Image search: [Google]

295KB, 555x686px

I don't know, he's starting to show the typical signs of a Revo Iron Man, sculpt is very soft/mushy and the joint segmentation is even more pronounced as the 45 is supposed to be super sleek.

>>5872297
Glad I passed on him then. He looked promising as hell too. I assume the mushy look is down to the paint.

>>5872297
retard who posted in the older revoltech thread instead of this one just said he's really amazing. who to believe?

File: CqiDJtuUkAAKS0u.jpg (145KB, 900x1200px) Image search: [Google]

145KB, 900x1200px

>>5872902
That was me, also old OP haha.

Hey post link to new one next time?

Anyways, 45 is the best Revo Iron Man for me. Poses very well, paint is nice and has good accessories. Even weapon holding hands for some reason.

File: 1469063923398.gif (3MB, 375x211px) Image search: [Google]

3MB, 375x211px

so honest question, why do ya'll like Revoltech so much?
I've bought 3 Revos in the past few years and I've nearly hated all of them.
The first one I got was Revo DMC3 Dante, it looks goofy as fuck and the joints are a weird mix of squishy and clicky.

Then I got Iron Man 2 War Machine.

The guy cannot balance without a stand, and again the joints just feel "off" Like I couldnt really pose him the way I wanted too. Goofy as fuck looking unless you put him into a "dynamic" pose and then only looked at it from a certain angle.

Then I got the Monster Hunter Swordsman Jinoh figure and again, not feeling it. hard to pose, or to get standing or to get it not look goofy.

Am I missing something about revos? Cause they look nice AF

>>5873298
I'm fucking with ya man. I always buy revos of stuff i like, but every time i open the box or touch those revos, parts fly everywhere, paint app is shit and they look fucking goofy half the time.

File: 1471879883428.jpg (716KB, 1260x1680px) Image search: [Google]

716KB, 1260x1680px

Stupid and sexy Sakamoto

>image cortesy of 2chan

>>5873796

>adding eyeshadow to those Legends figures

>>5873796
Sakamoto is a Hommo Superior??

That explain many things

File: CollectinGaems.jpg (1MB, 2046x1137px) Image search: [Google]

1MB, 2046x1137px

>>5873298
>so honest question, why do ya'll like Revoltech so much?

Because I've never had a problem with them outside of one figure having a stuck peg that took a drill to get out, they've got super good articulation which I highly value, and they're pretty well made.

I own most of the QB Revo's, Snake, Raiden, and a bunch of various robot Revo's. Shit's glorious.

>>5873880

Impressive revo collection. What do your other shelves hold?

File: TimeForDivinePunishment.jpg (2MB, 2048x1536px) Image search: [Google]

2MB, 2048x1536px

>>5873896

Books, a figma Satsuki & Ryuko, bunch of Transformers both 3P and official, some Daibadi stuff, and any useless junk/accessories/hats/whatever. Just general purpose shelves I toss all my stuff on when I don't have it on my desk/dresser/any other display point. Like most people my shelves are for display, or for stacking stuff I don't have on display

Do the TSFs hold up? Unfortunately, my local store only has the first two which they seem to have restocked in their website. The few times I went to the actual nearest physical store (since 2013) there was always a Takemikazuchi.

>>5874072
Yeah they're fine. Pretty standard joints configuration, has revo joints for shoulders and hips so no need to worry about weird articulation. Knees are just a simple, non-revo hinges.

The peg for the double joints for the booster jets might be tight so you would need to loosen the grip on your own.

Otherwise, has good sculpt and play value, just don't pay too much since they are pretty easy to find online for cheap.

>>5872914
>>5872917
I really dont know what to do here
with takeya's stuff l always went with the rust version, looked better most of the times and it's better as a whole
but this guy doesnt look colorful enough to look bad with the others

and buying two would be raping my wallet too much

>>5874148
>play value
Yeah, that's what I'm looking for. Thanks. Was actually looking for Eva-01 but the RDs and Revos never seem to be available. There's Vic Viper too.

It's wierd because I have no attachments to their respective franchises. But damn I want to fiddle with them.

File: 057.jpg (2MB, 3648x2736px) Image search: [Google]

2MB, 3648x2736px

>>5874752
You've made a mistake.

I would go colour though seriously. The promo photos never do them justice.

>>5875080
no, l haven't
l prefer the dark tones of the rust ones, that look like living statues, rather than the too much colorful ones.
l've seen em both in stores before buying, anf l still dont like those colored dragon and kirin (nor the skeletons, joints just look horrible to me)

but this guy's colored version looks dark enough..
l guess l'll wait till they're both out to make a choice

>>5873880
>Because I've never had a problem with them
well, i wish I didnt have that problem.

I wanted to like them so much, (which is why I bought 3) (( with enough time between them, because I figured myself it'll just improve more ))

but yeah, i hate the squishy and clicky joints and the goofy posing and just nearly everything I mentioned.

but I'm glad to know it's a ME thing. because clearly people like them, i thought I was going insane

>>5871422
Sakamoto doesn't look cool, he looks...goofy. The sculpt really hurts him, he's too thin and his limbs are too long. None of the show-poses in the 2ch thread look very good at all (although it could just be shitty posing). Kinda disappointing.

>>5875163

Well, to be fair, Dante was one of the first Revo's, and not very good even for his time. Dunno about Iron Man, I don't like Cap'n Alcoholic so I've got no idea what could be wrong, and I own the Zinogre Hunter myself. He is a little bit harder to mess with than most because he's fiddly with the armor plates and for some fucked up reason has peg hands instead of revo jointed ones, but he's still pretty easy to get into decent poses.

File: ZinogreHunter.jpg (1MB, 1600x1200px) Image search: [Google]

1MB, 1600x1200px

>>5875427

Wrong pic, this is the right one, that was an old shit pic I took.

File: DSCF5495.jpg (2MB, 3648x2736px) Image search: [Google]

2MB, 3648x2736px

>>5875084
The coloured ones are meant to look like painted wood carvings while the rust ones are meant look like iron statues like Jizai Okimonos original work. As much as the rusts are true to the source material I feel half of them look like shit in hand with blotchy paint jobs that look like someone just spray painted them and rolled em in dirt. That being said the rust Samurai Skeleton does look great in hand compared to the other rust's I've seen in person though I like the coloured's armor better.

It's all subjective though. I'm hoping they do an Ohmu as well but if they dont I can always get the statue.

>>5875469
l admit they could have done a better job with the paint, but l may have been lucky, but all of mine, while not perfect, don't look as bad as some pictures l've seen.

>>5872917
Hebikera color ver is up on HLJ

http://hlj.com/product/kyd12013

>>5873298
sell me that war machine.

>>5876226
idk what a good price for it is, i dont even know it's msrp

>>5876240
15$ good offer for you, best your going to get take it while you still can

>>5876314
I'll pay $16 just to spite that fucker.

File: 1472140480395.jpg (359KB, 1200x1600px) Image search: [Google]

359KB, 1200x1600px

Holy scale discrepancy, Batman!

>>5876570
revos are non scale anon.

>>5876570
Either Japanese Ultrons were nowhere close in scale to begin with.

Mark 45 is slightly taller than past Revo Iron Man though.

>>5876240
>>5876314
>>5876360
FYI, it goes for about $80 unopened and $40 opened, since it is a popular character, well made Revoltech, and was never reissued.

File: KAI10467.jpg (35KB, 752x564px) Image search: [Google]

35KB, 752x564px

How is pic related? How are the ZoE figs, in general? Any standouts?

[cant'spoileron/toy/]I know jack shit about the series[/cant'spoileron/toy/]

>>5878300
Ardjet is cool, but the manner in which they fastened the wings to the body and then the stand to the wings can be frustrating; if you've got the wings on, the stand has to connect to the wings, which makes weight distribution weird.

The best ones are the Jehutys, which are a blast to pose and just look fantastic all around.

Anubis is great, but his price has appreciated a great deal beyond his list price. Looks fantastic, but it can be awkward to pose; the wing bits can be a real pain to get perfectly aligned.

The Vic Viper is also looks fantastic, but can be very fiddly because it's a transformer.

>>5877538
oh cool. maybe I will pass it onto BST.
I've never shipped stuff before so idk. look out

>>5878300

I own Ardjet, Vic Viper, ZOE2 Jehuty, and Anubis .I think they're worth it. They're about as poseable as you'd expect from revo's, and last I saw both Ardjet and the VV were cheap as fuck. Anubis is a bit costly nowadays though, probably because of his big-ass wings making him more expensive initially, and then the price going up from there.

What >>5878319 said is true though, they did Ardjet's stand in a very funky way. You might want to just invest in a different stand or something for her.

So...Any news on any more Legacy's?

>>5881897
Well Delorean and Legion are sort of like that.

Bigger question is where are all the VulcanLogs? There is noting scheduled after Baikanfu.

>>5882270
Hopefully they'll put up some release dates within the next few months for stuff yet to be listed.

File: 670.png (191KB, 670x488px) Image search: [Google]

191KB, 670x488px

Yu knoe?

File: 1471082428438.jpg (123KB, 830x349px) Image search: [Google]

123KB, 830x349px

>>5884544
Figma will probably cover that base.

>>5884575
so blank face is gsc shop exclusive? fuck that shit

>>5875469

there are no wrong choices with Takeya revoltechs. I really wanted the bone colored yokai skeleton set but there were only rust colored ones available, so I ended up just getting those because I can pick in person. I love it a lot.

>>5884234

Cross them fingers for a Melona Legacy. I really don't want to shell out the big buckaroo's for one, AND have it be with the old, shit joints no less.

>>5875084
Hey I'm in the same boat. I collected the four divine kings in wood grain color and the Jizai Okimono all in Rust. They look great and I prefer these since they are more authentic/nostalgic to me. At the japanese temples, most of the statues had lost their paint unless they were properly shaded or indoors and the Jizai Okimono were often made with iron without paint anyway.

Source validity: I'm Japanese... that's about it.

>>5878319
Completely agree with this about ardjet. She often looks great without the wings altogether. She also quite small compared to a lot of revoltechs, just as a fair warning. I got her for like 7 bucks so I just grabbed it.

Saw an interesting tweet by Yamaguchi. He refrained from getting Reycal Manga because he knew it would affect his work for sure. So I assume that means he is making something in the same ballpark.

Any ideas?

>>5886117
where do you live?
nice english!

Anybody have any pics of the '66 Batmobile?

File: 7II0gJY.jpg (27KB, 1000x667px) Image search: [Google]

27KB, 1000x667px

So I was looking at my Revoltech Woody today and notice something that stood out, is his hat not suppose to be symmetrical?

Like it doesn't have a perfect "bowl" shape, the left side sticks up more than the right, and it's much more noticeable looking at it from the back where it starts to curve upwards.

Does anybody else have this or has the material just started wearing down over the years? It fell down once when I was away and Woody was laying on top of the hat while wearing it, so that may have caused a wear sag, but either way it's driving me nuts (but not sure if "pay for the same figure" again nuts)

File: RSFX010_misc_3.jpg (137KB, 665x1000px) Image search: [Google]

137KB, 665x1000px

>>5889675
This is straight from the product photos on Hobbystock.

I had no idea one side of Woody's hat was curved in the film, either that's a weird attention to detail or the modeler just fucked up?

File: IMG_2344.jpg (111KB, 750x1000px) Image search: [Google]

111KB, 750x1000px

I just got this thing the other day as an impulse item. Never owned a Revo before. Are they all this fiddly and difficult to move (yes, I'm used to the kiddie Hasbro stuff).

Don't know what to do with it at this point, but it'll probably go in the BST.

>>5887899

Is that balloon clothes?

>>5890097

Depends on the figure. Revo's aren't that hard to figure out though, it's not rocket science. You rip off the limb and turn the joint, then put the limb back on if you're having trouble.

>>5890186
Figuring out how to work it isn't the problem, it's that there's not really instant gratification in moving it around. I had wanted to try out some Assemble Borgs, but I think my first time with Revos soured me.

File: IronBland.jpg (102KB, 600x600px) Image search: [Google]

102KB, 600x600px

>>5872297
>>5872908
>>5876570

Not going to lie: These shitty pics actually make the figure look way better than the fucking official ones.

The official shots make the figure look waaaaay too red, and the gold parts look like a washed-out silver.

One of the few times where a figure actually looks way better in-hand and in amateur pics than in the professional production shots.

>>5890097
Ill give you tree fiddy.

>>5890097
if you have issues with this one, try posing fujin/raijin on their stupid stand

if they included a decent stand like figma's, revoltech would be a much better line overall.

>>5890647

They've started doing so now with the Vulcanlogs.

>>5890294
>One of the few times where a figure actually looks way better in-hand and in amateur pics than in the professional production shots.

all Mezco figures

File: vulogbaikan1.jpg (197KB, 600x600px) Image search: [Google]

197KB, 600x600px

I can't find any reviews or videos of this guy. Anybody have him? How is he?

>>5891804
I really would like to get him, but that price is just way too ridiculous.

>>5890731

Part of that is just that Mezco's promotional shots are always garbage lol

File: Photo Sep 05, 2 34 11 AM.jpg (173KB, 1612x1209px) Image search: [Google]

173KB, 1612x1209px

>>5871422
Been a long time since i got a revoltech robot. not as good as Dancouga, but still good

File: Photo Sep 05, 3 38 16 AM.jpg (178KB, 1209x1612px) Image search: [Google]

178KB, 1209x1612px

>>5894215
>>5891804
just recieved him actually~

>>5894217
>>5894215

Looks cool, but...Why's he so damn pricey? Does his come with like 40 accessories or something?

File: Photo Sep 05, 2 58 17 AM.jpg (166KB, 1612x1209px) Image search: [Google]

166KB, 1612x1209px

>>5894217
Not sure? he comes with four swords, six additional hands, a shield, and shoulder pads

File: Photo Sep 05, 3 21 23 AM.jpg (870KB, 1596x4824px) Image search: [Google]

870KB, 1596x4824px

>>5894282
GOD.

HAND.

SMASSHH!!

>>5894273
Sentinel collaboration

>>5894282
How is the paint in comparison to the usual Revo offering? Still looks somewhat thick, materials better quality?

Got to be something to the price besides it been a collab.

>>5894305
The plastic is more solid than revos, it doesnt have that very slight "gummy" feel. The paint is pretty much the same, but there's alot of it, there's even paint detail underneath his shoulder pads, and the insides of his elbows.

Speaking of the paint...it caused me issues that i never faced before with revoltech. When I got baikanfu, he couldnt turn his head, because the peg hole for the revo joint was painted, making the hole too thick. easily fixable tho.

What wasnt easily fixable was one of his hinged shoulder joints, both the peg and hole were painted, so when i moved it, it snapped off. had to slice open his shoulder and drill a new peg inside.


moral of the story: give your toys some time under a hair dryer, then carefully loosen the joints..

>>5894288
Whose that getting beaten up?
>>5894290
Is there any worthwhile engineering thanks to the collab?

File: Photo Sep 05, 5 46 44 AM.jpg (161KB, 1612x1209px) Image search: [Google]

161KB, 1612x1209px

>>5894803
SH Figuarts Baltan. im not into Ultraman, but the design is charming

>>5873298
>Am I missing something about revos?

No, that's more or less my experience with them as well, though I'd add that they're also prone to plasticizer leakage on top of everything else.

>>5873298
Most people I see who don't like them or say "Revoltechs are hard to pose" don't pose their figures well in the first place. They're happy with really static poses (or simple poses), while Revos are usually designed to be in really dynamic poses. See: everything on Yamaguchi's twitter

Interestingly, I'm surprised you think the majority here likes them. They were looked upon favorably here a long time ago with the market had less to offer, but over time I see more and more users on /toy/ posting about how they hate them. I also see more and more pictures of shelf displays with a bunch of straight legged Marvel Legends, characters holding swords the wrong way and buckling their knees in a sword fight, etc.

>>5895016
Can you show us an example of your posed collection?

>>5894832
lucky devil I couldn't even preorder that before stock ran out and I can never see one for sale. I don't know much about that clawed character but when I saw it I too thought it was a loveable looking character.

>>5894305
>Got to be something to the price besides it been a collab.
Being Sentinel has pretty much nothing to do with price...

It's still Union Creative releasing it, Sentinel is part of the companies they distribute for just like Kaiyodo.

With Goshogun, the reasoning was inflation in general, and the number of parts and paints were double that of regular Revos apparently. That sculptor wasn't used to keeping such things low to save cost I guess. Actual Sentinel figures are expensive because it has so many moving parts and are of higher quality for a smaller company with lower number of production. The VLs they sculpt are not like that.

I think the mecha VulcanLogs too are lower in number compared to the others like MH or YuGgOh so that drove up the pricing. Kaiyodo would not have made such distinctions with their robot Revos but I think UC isn't so keen on having an universal pricing despite how many they are making. Maybe if they pick a robot that would sell better the pricing would not be so high, but they are sticking to pretty niche selection.

>>5894803
i think the selling point is sentinel's sculpt+ revoltech engineering

>>5895016
>>5895019
Gee I couldn't help but notice you made a statement about the community's ability to pose figures, but STILL presented no example of how to pose them yourself.

Care to post your own collection so that we can be properly educated?

>>5895474
No one's gonna post anything cause no matter what, you're gonna shit on it cause you're butthurt that you may be one of those that suck

>>5895514
I see a lot of these posts in the occasional display thread and I'm genuinely curious about them, in the sense that I thought I had it figured out, but that might not be the case.

I can accept sucking if I can understand WHY, I just want the guy to post pictures of his collection since he seems to have an idea of what posing should be, pointing out buckling knees, holding weapons improperly, straight legs etc. as in there's clearly substance in what he's saying.

I'm not looking at this from the perspective of a butthurt poster (though somebody could piggyback on my posts just to shit him) but I would like it more if people took responsibility for their statements on the quality of collecting in this board, a visual example goes a long way, otherwise you're just saying "everybody's doing it wrong" without much help.

>>5895016
What's wrong with knee buckling? I like doing it cause it keeps a figure from tipping over without a stand.

Is the Mark 45 Yay or Nay?

>>5896874
hes a yay for me

>>5896874
Go for it.

>>5895581
I think he was saying that the general complaints been about Revos been hard to pose come from people who don't like the type of dynamic poses that Yamaguchi does and a lot of Revo collectors like.

Basically he feels the complaints come more frequently from the type of people who want to be able to pose their figures in a more neutral position like stood up straight with not much bend to the knees. (I'm not saying that the people who want that are incorrect) and don't accept that Revos don't really aim for the stood straight poses and flourish much better when you go for dynamic poses full of movement.

Personally I think Revoltech is a serious Love or Hate type of line. If you like the Yamaguchi style/Platinum Games over the top style of action then you probably will enjoy the Revo figures.
If you don't get his style then I think the Revo line won't really work too well. Of course there are going to be exceptions to this as that isn't really a rule but I feel it seems to be a general vibe in Revo threads.

For anyone that has Cattleya does she have a double ball joint in her torso or is it so long that it's two single ball joints?

>>5897624

Do you mean the 6mm or 8mm?

>>5897672

6mm

>>5897624

Two single ball joints, so her full torso (crotch, belly, breasts) is 3 parts.

>>5897747

Man, i'm trying to get a legacy/improved 6mm flesh joint but I don't know where to get one.

>>5897790

Doesn't Sigui have a 6mm revolver joint? She has a legacy release.

File: SnakeGetsTheBounty.jpg (395KB, 1186x1046px) Image search: [Google]

395KB, 1186x1046px

>>5897790

Well, what I did to fix up my Menace was to take the neck joint from a bunch of my Legacy's/post joint fix QB girls, and then just use those. Since the heads on the QB girls aren't, you know, super heavy or anything, the old shit tier joints work fine there, and Menace has good body joints as a result.

I should probably do the same for her arms, but meh.

>>5897806

Sigui doesn't have a Legacy. She is post-new joints though, she she has the good joints by default.

>>5897814

Does she have a 6mm revolver in her torso?

I kinda want to get the DMC Krauser Revoltech, the tanned Indian version, is it still a decent figure by today's standards?

Can anyone repost the photo directions to fix Vulcan Venom Snakes face? I'd appreciate it thanks guys.

I have it. I bought it for the guitar and mic accessory and it was also only 1k yen on Mandarake. To be honest its pretty shit and I plan on salvaging it for joints. That being said it did convince me to check out the manga which was fucking fantastic.

>>5897814

I'm trying to work that out for echidna's torso but using two of the newer 6mm single joints is too long, do you recommend cutting them or trying to find another 6mm revolver joint?

>>5897999

I have no idea how I would fix her torso. Sorry man. Just get a black colored newer one and put it in there? Not like anyone will notice if it's inside her body, right?

>>5898091

Yeah I don't mind the color it's just hard finding one of the newer style joints and not just the grab bags on ebay which is usually old style joints.

>>5897947
I think all you have to do is place the face in warm water and then use your thumb and index finger and apply small pressure around the eye area to close it up. I don't have the original pic but that was essentially the idea since the eyelid was more open giving Snake the 1000 yard stare.

File: FIGURE-018773.jpg (73KB, 600x600px) Image search: [Google]

73KB, 600x600px

Anyone get those baseball players?

File: TL300795379.jpg (46KB, 354x532px) Image search: [Google]

46KB, 354x532px

>>5898091

I just got pic related, hopefully these are the new joints style.

>>5900936
>>5900941
>>5900943
>>5900944
Neat, but perhaps a little overdone

>>5900957
you just described Deadpool perfectly.

>>5900957
>He thinks you can be overdone on memepool.

>>5900936
>>5900941
>>5900943
>>5900944
I have zero interest in Deadpool but that's a great looking figure, and the box is awesome.

>No mention or appearance of Vulcanlogs Yuuichirou and Mikaela at the last WF
>inquired about it and UC replied that "they're still working on them"
>a month and a half still no updates about them
I'm really hoping they didn't can them, I mean it's weird since they already made uncolored prototypes 2 WFs ago, and I'm confident that their Seraph of the End line of figures would be one of their most successful lines. Should I just assume that they cancelled them?

>>5900936
>>5900941
>>5900943
>>5900944
I can't wait for tons of domesticfags to bash this when they can't figure out how to use the slightly different joint integration

>>5900936
Completely forgot about this guy ever since the license debacle.

Where do you even buy him now?

>>5902054
Plamoya seems to be the only place I can find that has a preorder available. But if you wait like a week or two after release, he'll probably be up on amazon for a good price by 3rd party sellers.

File: Screen Shot 2016-09-08 at 10.05.49 PM.png (614KB, 784x586px) Image search: [Google]

614KB, 784x586px

>is that a mall?
What the fuck

>>5902069
Its Deadpool.

Why the fuck are you questioning it?

>>5901328
>slighty different

you mispelled "bad"

File: Screenshot_2016-09-09-01-45-40.png (2MB, 2560x1440px) Image search: [Google]

2MB, 2560x1440px

Found a video review for MK45 Ironman. Really interesting decision for the chest

https://youtu.be/fcqUGtT4a5Q

>>5874752
Probably helps that in this case they went more towards trying to match the more washed out water color tones of Miyazaki's manga versus the solid and more saturated colors of the film.

Personally I wouldn't feel too much of an issue myself getting it colored versus the rest of takeya being rust since it's something from a fantasy film versus myth and legend. It already stands out from the other takeya without being in color is my opinion.

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

So I got Baikanfu in the mail yesterday and opened him. His arm literally fell out of socket, the peg had been sheared before I got it. Now I'm trying to fight AmiAmi for a replacement, they told me to take it up with the post office. WTF

>>5903093

That sucks, sorry to hear that Anon. It doesn't use Revo joints all the way through though?

>>5903119
No, the revo joint is in the upper shoulder and then there is a peg swivel at the top of the bicep. No bicep swiveling on this guy, disappointing really =\

>>5902054
I placed a pre-order on CDJapan, and got a confirmation when I did so. The payment went through, and I was never refunded or told it was cancelled.

Does this mean I'm getting the figure still?

>>5903275
I mean, that sounds promising, but you should probably email them about it at some point.

>>5903275
Searching Revoltech Deadpool on CDJapan gives me nothing, they must have removed the listing.

Maybe they're committing to early orders, I guess.

>>5901147
Hard to tell considering there is little news on future Vulcanlogs at all. Maybe sale numbers were not as good as they hoped so they are shuffling some future projects around. UC does release a number of different stuff other than VLs and maybe those are doing better in today's market.

>>5902333
Yeah I really like it though, lets you get some extra clicks forward without looking too odd. It's cool that they keep changing the format of articulation each time. I think they hit the sweet spot for articulation and visuals with this one.

Too bad IM related characters are the only ones Kaiyodo seems to be allowed to produce for MCU. It would've been good timing to make Black Panther, Falcon or Vision ahead of other companies.

File: AlleyeneAndEchidnaPlaying (2).jpg (303KB, 1430x1177px) Image search: [Google]

303KB, 1430x1177px

>people always going on about figma ass tech
>Echidna has been around for years, along with the rest of the QB crew

Does no one know?

>>5903652
I'd imagine figma is far more known and picks up trending series to take advantage off for ass tech. People still have that love it or hate it thing for Revoltech so Queen's Blade was probably not seen as often.

File: Photo Sep 04, 9 10 07 PM.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>5903093
>>5903122
anon, that's the same exact problem i had, and on the same shoulder too! here look: >>5894347
now you cant even tell that it was broken:>>5894282


if you have an exacto knife, and a drill or vice of some sort, i could tell you how to do it, otherwise go for the replacement

>>5903652
>>5903692
And you can't blame people for not liking QB Revos or avoiding them. When it started out the sculpt was a bit rough and the 6mm joints were at its maximum degeneration.

I noticed people rarely go back to check a toy line out when their initial experience was a bad one. Like they can't imagine things actually improve... Probably why till this day I still hear complaints about Dante. But I guess not so many toy lines are different from figure to figure as Revoltechs are.

File: DSC00580_1.jpg (1MB, 3600x2026px) Image search: [Google]

1MB, 3600x2026px

Finally received my XLV Iron Man. He's very revoltechy in the best and worst sense. One thing for certain though is that the promo pic doesn't do the figure justice, the metallic red is way darker than the cheap bright red they show on promo pic. Also this guy for sure is the most articulated Iron man out there

File: DSC00585_1.jpg (1MB, 3600x2026px) Image search: [Google]

1MB, 3600x2026px

>>5904725
Unfortunately, on neutral pose the proportions are super off. The limbs are lanky, abs are too small, and the diaper butt are too big. Certainly doesn't come off as someone with an exoarmor on it

File: DSC00587_1.jpg (1MB, 3000x1688px) Image search: [Google]

1MB, 3000x1688px

>>5904733
One improvement over other Revo figures that I really like is that finally we get a real ball hip joint, so no wonky hip joint like Big Medic or Ultron anymore

File: DSC00581_1.jpg (1MB, 3600x2026px) Image search: [Google]

1MB, 3600x2026px

End of blog

File: Cattleya3.jpg (603KB, 1139x987px) Image search: [Google]

603KB, 1139x987px

>>5904577

Joints are almost a non-issue these days thankfully, since if theres a problem, you tear the joints out and replace'em.

>>5904823
Yes, but not many are aware of such changes, which was my point.

Kaiyodo doing Legacy releases was a smart move, made more people aware of it and even go back to seek older Revos apparently.


Would've been better if they kept it up.

>>5904736
Mark 42 did that way before btw.

how is revoltech Jason Vorhees? and where could I buy him?

>>5904907
He's okay, kinda small, good accessories though. Mandarake has him for 55-60 before shipping, probably not worth it. Go for the NECA I'd say.

File: FuckingCat.jpg (143KB, 599x600px) Image search: [Google]

143KB, 599x600px

>>5904895

When are we gonna see the next Legacy line already? Shit, even if they only made the top 20 or 30, we'd still get some of the rarer, expensive as fuck Revo's re-released.

>>5903652

Part of the "ass tech" thing, though, is that they make the asses look full, smooth, and seamless.

That one looks full, but not really smooth, or seamless.

>>5904936
Satsuki Figma has great ass tech but bend her legs past the set position and it's not smooth or seamless. Still great ass tech

>>5904979
That's the opposite of ass tech. That was just a well sculpted ass. Ass tech means it looks good in multiple positions, like all those panty-sporting school girls.

>>5900936
Stoked for this. I bought the newest Marvel Legends version at Toys R Us to hold me over until this one is out. Looks amazing as fuck, loving the old school comic design.

File: 1349060013533.jpg (324KB, 819x1024px) Image search: [Google]

324KB, 819x1024px

>>5904983
I still feel like they haven't surpassed Hibiki yet in regards to ass-tech.

>>5903958
They outright refused replacing it. I have a drill though, enlighten me.

>>5905090

Thats terrible fucking customer service. Sorry to hear, man.

File: Photo Sep 04, 9 10 07 PM2.jpg (150KB, 1903x907px) Image search: [Google]

150KB, 1903x907px

>>5905090
The peg I used was from a gundam sprue. Just get anything thats of similar size to the peg that was on baikanfu.

if you need more clarification, please tell me!

>>5905234
oh, to clarify, i sliced the part in (1) with an exacto knife. But before you do that, you should place the part under a hair dryer for a while, makes it malleable and easier to cut

>>5903122
Man, that kinda blows. I feel like if Yamaguchi was doing the articulation he would've had one in there.

Though I'm not sure how many of the other Revo mechanical have bicep swivels anyway.

File: Photo Sep 11, 2 05 10 AM.jpg (110KB, 1209x907px) Image search: [Google]

110KB, 1209x907px

>>5905360
>Though I'm not sure how many of the other Revo mechanical have bicep swivels anyway.
uuh, they all do. even baikanfu. the revo joint doubles as a forearm and bicep swivel

>>5905375
Of course, but I like it when there's a dedicated swivel so that the sculpt actually moves.

>>5905396
ooh i getcha.

for the yamaguchi robots, they had a dedicated swivel, Dancouga and Arbalest come to mind. but baikanfu doesnt have that yeah

while i do like alan moriguchi i would have preferred it if yamaguchi designed baikanfu. cause proportionally he suffers from the same issue as SRC Gurren Lagann, chunky legs and weedy, weak looking arms

Which EVA figure is it that comes with the blood splatter effects, and how many blood splatters are in it?

>>5905403
EVA 2 Beast. it has two effects, but only one can be used with other figures (pictured)

File: TOY-RBT-1126_14.jpg (60KB, 600x525px) Image search: [Google]

60KB, 600x525px

>>5905409

>>5905411

So whats the other effect then?

>>5905420
you can exchange its eyes for eyes that gush blood

File: machine_robo.jpg (34KB, 500x375px) Image search: [Google]

34KB, 500x375px

>>5905402
I don't really see that problem with Baikanfu, personally. Maybe thats just cause I like my robos to have powerful legs.

File: CVOeZL7UwAAZf0S.png (806KB, 600x845px) Image search: [Google]

806KB, 600x845px

>>5905424
powerful legs is nice but powerful arms is important too~

>>5905430
Yeah, that's true. Either way, all beef is good beef.

>>5905402
Was SRC GL Moriguchi? I only know of Detonator Orgun as his work.

Yamaguchi bots ditched the diagonal shoulder cut joints eventually though.

I agree Yamaguchi shoul've done these. They look and articulate pretty much the same and yet end up costing way more than they should. I feel like Yamaguchi knows ways of keeping cost down.

I wonder if he lost his love for giant robots because he hasn't really done a completely new one in ages.

>>5905496
>Was SRC GL Moriguchi
no no. the proportions just remind me of GL

>I wonder if he lost his love for giant robots because he hasn't really done a completely new one in ages.
i dont think he's lost his love for it, it's probably that he has other priorities now, namely Amecomis and other things. if thats the case moriguchi's not a bad substitute

>>5905496
>I wonder if he lost his love for giant robots because he hasn't really done a completely new one in ages.

I don't think so, or at least he still plays around with them on his Twitter.

>>5905600
Sure he builds some occasional Gunpla, but for a guy who is known for making robot figures it has been quite a dry spell.

File: IMG_620644.jpg (143KB, 750x1000px) Image search: [Google]

143KB, 750x1000px

Buy some cnina toy soldiers for 1,5 bucks, because of their riffles. Works fine with Snake.

File: giant m16 by Yamaguchi.jpg (32KB, 478x640px) Image search: [Google]

32KB, 478x640px

>>5906171

File: UoNcrUc.gif (3MB, 640x266px) Image search: [Google]

3MB, 640x266px

>>5906171

>>5905496
you never lost the love for robots, you just put on pause at best

>still no word on Legacy's

Feels bad man. That poll gave me some hope.

>>5906171
Yeah might work better with the full size version, anon

>>5910308
can't fucking wait

I know most will say that the RD EVAs are generally "better", but having two RDs and 1 revo, I'd really like to even that up. I'm looking at the LR EVA 01 Awakening version. I know about the hands being swivels, but is there anything else I should know?

File: CsOP2PsUEAAaxnI.jpg (88KB, 1200x900px) Image search: [Google]

88KB, 1200x900px

>>5910308
So his legs can go together, good to know.

>>5910519
You're talking of the Legacy right?

So the hips are cut joints like older Revoltechs. That's two diagonal swivels at hip and upper thigh. shoulder pylons are attached to body via a hinged peg joint, what's commonly used for wrist joints in many older Revos, fgma or Minis. They are kind of flimsy, looks like they float about.

Not as good as the Evolution sculpt, but they're okay.

>>5910527
Ah I was just about to post that saying "Is this standing straight enough for you?" because people always bitch about that...

That's been an issue with minority of Revos at this point but still gets brought up. Well V Snake didn't help.

>>5910527
>>5910535
I think people were more worried that he wouldn't be able to kick straight forward, Ultron can stand straight up too and he's still got diagonal hips. The recent legends deadpool ended up being pretty disappointing though so I'm still hyped for this guy.

>>5911494
I'm pretty sure he can't then You mean like normal sitting position right? Because you can "kick straight forward" with one leg if you twist parts around properly.

I do prefer the Revo jointed hips but I get this way it looks better when posing. Plus I suppose ball joints makes it "easier to pose."

>>5910535
I love how that's a legitimate issue for some people.

>>5911657
But I don't want any sort of dynamic posing :(

>>5911667
then buy a fucking statue.

>>5900361

Whelp, for anyone curious these are not in the new joint style. On top of that two of the joints were busted out of the box.

I get the feeling we never saw menace, melona or echidna legacy releases because revoltech didn't retool new 6mm double joint pieces and just did all others as the larger 8mm joint or just single joints from there on out.

Level with me friends, is there an updated 6mm double joint out there?

>>5912332
Oh I could've told you that, sorry.

No they never released joints pack after the upgrade. the one in pics are really old though there were ones sold in plastic bags, but still the older joints. But they were of better quality.

The only way to get surplus joints of newer design are with the Assemble Borgs. The Nexus releases even has the ones with increased ratchets.

The older ones coming out for regular release will have the previous version, still two-piece 6mm so not too bad, since they are just getting rid of old stock.

But these are all black joints.

>>5912577

I don't care if they are black but considering you have more experience with assemble borgs can you show or link the ones that have the new style 6mm double joint? It is incredibly difficult to find good information.

>>5912596
The first generation guys doesn't but anyone later do, basically. Second generation guys have the 2 piece newer 6mm joints, and anyone Nexus will have the latest increased ratchets joints.

Simple answer Yeeg and Zain has the old joints.

>>5910308
Where's that colossus hair piece from?

>>5912889
yamaguchi made since those are his images.

>>5886117

I'm Indonesian, I've been traveling back and forth Kyoto just to see those statues. Takeya is also one of my top 3 fav artists ever so to have this line is a fucking dream come true. I'm so glad they offer both full color and rust/wood color option.

I chose full color for the 4 heavenly kings and the Asura because he reminded me of the super old Asura statue in Kofukuji somewhat and rust/wood color for the Kongorikishi because the ones in Nandaimon, Todai Ji are actually my favorite pieces of classic art.

The Takeya revoltech line is a real childhood dream come true.

>>5890097

Where are you based at? I'll take it off your hands if it's in good condition and price + shipping to be reasonable. I'm in SE Asia.

Is Deadpool out yet?

>>5915682
October

>>5912706

I have made progress! So while scoring hundreds of photos and forums I saw that the revoltech stormtrooper has 2 black 6mm double ball joints for the shoulders. I'm going to pick one up for parts.

>>5910535
>That's been an issue
the hunchback? or something else I need to be aware of?

>>5915910
The legs and/or shoulders, tend to be spread outwards in neutral position. But that was because they had cut joints there and that pretty much stopped after the first year of two of Revoltechs. Ones using Revolver joints are pretty versatile in taking most poses you would expect.

hokuto noken musou ver in your opinion from 1 to 10?

>>5916514
8 for Rei. They didn't paint his eyes nearly as cool as in the promotional photos.

hey guys calling all toyamaniacs! how is the revoltech skeleton samurai?

File: MDC_NORIAKI_KAKYOIN.jpg (113KB, 800x600px) Image search: [Google]

113KB, 800x600px

Hey buds, I just got the Kakyoin figure in the picture and I have question for anyone else who owns it.

Did each head come with its own neck? The sunglasses version didn't have one for me and I can't figure out for the life of me how to get the other head off the neck to switch it.

Thanks pals.

>>5917259
Medicoms dont come with multiple necks, don't think any figure line does?

try putting his head under a hair dryer for a under ten or so seconds to soften the connection, then gently remove

also this is the revoltech general

>>5917264
I'm sorry, I'm just getting into figurines and I'm very lost

For anyone who has bought a nexus assemble borg do they come with the bag of assorted joints like the older releases?

>>5917398
There are a shit load of extra joints in nexus yes.

>>5917404

Like the smaller 6mm joints or just 8mm? Looking for 6mm revolver and single joints

>>5917409
I'll have check when I get home but I'm sure it's the 6mm ones mainly.

>>5917445

Thanks mate, if they do have both types of 6mm joints that are improved from the old revo borgs I will buy one

File: IMG_20160917_182811.jpg (3MB, 2646x2156px) Image search: [Google]

3MB, 2646x2156px

>>5917447
Here is pretty much all the joints nexus came with, there might be one or two with another figure of mine or in nexus' orange box.

>>5917657

Oh shit okay, man would it be alright to maybe buy the joints I need off of you? If that works with you.

[email protected]

If not I will buy a new borg and most likely sell it in the /bst/

>>5917691
Somebody had a nexus for cheap at the end of the last bst, might be worth looking for it.

When does amiami usually charge for preorders? This was my first time because I really fucking wanted all the assembleborgs.

>>5918735
When they meet release and prepare everything for shipping. If something gets delayed then they usually reorder it to its release month.

>>5917259
go to the SAS general. Also, SAS usually have a peg on top of the neck, so you just have to pull out the head and push in the new one. At least that's how my jotaro is. You can ask here >>>5901516

Have anyone tried the new figma archetype neck onto a QB body? Does it work?

>>5911657

I own Snake and it fucking annoys me.

Why the fuck should it be hard to give him a pose where he isn't doing the splits?

>>5921339
Actually I remember that being brought up as an issue at release. One anon did some cutting with the straps and supposedly dealt with the leg issues but I figured it has to do with the way the hips are set up.

>>5921339
>>5921360

Don't cut the straps. Nothing to do with the articulation in that matter.

The socket and the ball joint column themselves interfere.

You can twist the thighs outwards to get the legs a bit closer. Still have the legs apart but looks like standing straight to me.

I think they made the ball joints so thick so dumb Americans wont break them. I think they still keep a certain standards for durability that is higher than other Japanese companies.

>>5903093
Got mine today and I can't help but think that those aren't really joints to begin with since the pegs on mine are stiff as fuck.

Also, my general opinion about this fig is that it's merely okay and absolutely NOT worth the retail price.
It's not any bigger, more detailed or of higher quality than older Revoltechs (in fact, the finish of the paintjob on the shield of mine is pretty bad) and you could easily see this being released seven years ago along with the Revo Dancouga.
It's also odd that the feet are one solid piece each and don't have any toe joints despite being large enough to house them.

>>5911667
You are buying the wrong line of figures then lad.

File: petting the king.jpg (468KB, 800x1800px) Image search: [Google]

468KB, 800x1800px

any news on beat and arthur?
it has been pretty quiet recently, must be the lack of releases, i hope there'll be some discussion once the assemble borgs are out

The first Revoltech Yotsuba, is she worth it? a great figure or naahh?

File: 4370-550x-2233773556_e73c165e6a_o.jpg (82KB, 550x825px) Image search: [Google]

82KB, 550x825px

>>5926798
If it's this one then yeah. I only have the summer version but she's fairly posable and hell, it's Yotsuba. The only issue I came across was one of her hair pieces was prone to falling off easily but other than that I can recommend her.

>>5926798
She's pretty good, but remember she's on the 1/10th scale Fraleuin series, rather than proper revoltech. Also she had cut joint waists, if that bothers you

>>5926833
>Also she had cut joint waists, if that bothers you
I don't really mind that visually, but what does that mean for posability?

>>5926842
It's kind of hard to describe, but look at her pics. >>5926832

For example she can't bring her arm 90 degrees to the side. She also can't bring her leg straight forward, it's always on an angle

File: IMG_1672.jpg (2MB, 2418x3635px) Image search: [Google]

2MB, 2418x3635px

I got Mark 45 mainly for the effect parts but it's all around a good figure. Very posable.

File: 2016-09-23 14.05.30.jpg (531KB, 1920x1080px) Image search: [Google]

531KB, 1920x1080px

I hated revolmini solid snake with a passion, but I recently got the cyborg ninja and I love him. Probably because he doesn't have the retarded bondage straps getting tangled up with his hips. He sort of feels like a better version of raiden, and I adore raiden. Anyway, what other releases in the line are worth a pickup? I still hate the scale, but I kind of want at least one other fig at this size.

>>5927624
Nice pose.

>>5927624

Just Ninja and Snake are worth it. Might as well ignore the rest.

>>5927643
I really like how he's light enough to pull that kind of thing off.

>>5927671
That's pretty disappointing.

File: 09.jpg (514KB, 3009x2845px) Image search: [Google]

514KB, 3009x2845px

>>5927624
Ironman and War Machine are surprising when I got them in. Manage to nab Ironman for 1.5k and War Machine for 3.5. Only downside of Ironman is the lack of hand repulsor effects and you only have effect parts for his feet. War Machine packs more effects for his guns.

>>5927696
>a bunch of iron mangs on mandarake for 1500
>even cheapest shipping brings them in line with the overpriced domestic ones on ebay.

Next time I do a big order, I guess.

File: IMAG2164.jpg (395KB, 927x1566px) Image search: [Google]

395KB, 927x1566px

Selling an Iron Man MK 3 if any Britbongs are interested?

File: ripminis3.jpg (648KB, 1968x1876px) Image search: [Google]

648KB, 1968x1876px

>>5927624
>>5927695

Don't listen to that guy. Minis are all great besides the Soviet Soldier since they all are basically the same body sculpt.

I like all the Kinnikuman characters that is not Kinniku Suguru, I think Yamaguchi nailed the super poseable male body buck with them. Iron Man pair is fun too. Venom Snake of course is a great figure all around. Klaus is pretty good but Zapp is pure crap.

Just try not to pay too much for them.

>>5927913
What's wrong with Zapp? I got a chance to watch the series he and Klaus is based on and he's a blast.

>>5927973
Poseability issue. Elbows and knees can barely bend. Wrists are not as free ranged as one would want for a swordsman figure. Just not worth the increased price, maybe at 50% off you should get it along with Klaus.

There are figmas on the way I believe? Might wanna wait for those but I doubt Klaus can be any better than the Mini. Probably be near 7000 yen anyways not being a fotm school girl figma.

File: Jofuu1437453065.jpg (65KB, 1024x576px) Image search: [Google]

65KB, 1024x576px

>>5928019
I'll wait on the figma, thanks anon

>>5923590
Opened my Baikanfu.

I see what everyone means. There is definitely a swivel joint placed in the shoulders, the way the shoulder pads moves confirms it. I checked the Sentinel's blog and it does show and say the upper arm swings out. And warm up the plastic if it's stiff.

Bull shit they're completely stuck on mine. I think either the factory did that by mistake or they made last minute changes.

Due to the way the revolver joint's pegs are positioned in the shoulders they do give enough swivel to outwards direction, so it's not that big of a deal.

I could try cutting into the separation point but the peg them selves might be glued if it's not from the paint sticking the two pieces.

Don't fix what's not broken I guess. The wrists works much better than Goshogun so there's that.

I might go through twitter and see if the shoulders are stuck on all or most. Shishioh's review of it looks like they were stuck.

Went through some twitter pics. They all look like they got stuck shoulders. One guy's twitter even mentions how his was about to break there, sent back for replacement, and got the same or another one back in the exact same condition of near breaking point haha.

No official comment on the matter as far as I can find. I think they made it a sold piece on purpose because it was a structural weak point.

>>5928786
>>5923590
>>5903093
>>5903958

"Legacy of Revoltech" indeed

>>5929231
Good joke if Baikanfu actually belonged to that.

>>5929246
>"REVOLTECH INHERITANCE" indeed

better now?

>>5929271
YES.

That's such a Japanese naming too, sounds so dumb. Should've been Revoltechs Lives On or something.

Which queen's blade revo should I buy? I'm torn between quite a few of them and can only afford one for now

Deadpool at the end of October, or before?

>>5930684

22nd

File: Menace3.jpg (870KB, 1600x1200px) Image search: [Google]

870KB, 1600x1200px

>>5930680

What are you looking for in a figure?

>>5930680
Avoid Nowa, Menace, Leina, and Siggy because they have no pussy.

>>5930784
Good quality sculpts, decent articulation, and [spoiler] big anime titties [/spoiler]

>>5930817
Cattleya, Legacy version.

File: CattleyaIsOneOfTheBreastOfUsAll.jpg (873KB, 1600x981px) Image search: [Google]

873KB, 1600x981px

>>5930817

Legacy Cattleya for the biggest tits.

Others also have good sized jugs, but nothing beats her.

I finally found a store that stocks joints from the Revoltech Supply Parts line (I'm looking for those specifically and they're sold out on the usual places or are horribly overpriced)
Unfortunately, it's all in Japanese and only delivers inside the country. I've bought a few things with Buyee before but their shipping charges are kinda shit and it seems to have a bad reputation, can anyone recommend me a good proxy they've used themselves?
>>5930875
What character is the girl with the wings?

>>5933393
Nanael. Also have a Legacy version. Her alt face and body under clothe have "holy milk" sculpted on.

File: svtb-mz.jpg (88KB, 800x800px) Image search: [Google]

88KB, 800x800px

Son of a...

Kaiyodo finally does a Mazinger Z but it's a soft vinyl. I smell the clutches of Bandai at work.

>>5933492
Nice. I was actually interested in the articulation of the wings for an angel character of my own.

>>5933393
>can anyone recommend me a good proxy they've used themselves?

>http://http://zenmarket.jp/

From the times I've used them, they're pretty good.

>>5933657
Shit, messed up that url.

>http://zenmarket.jp/

How's the paint on the Evangelion Revoltechs? Looks very spotty on the promo pics, so i fear for what the actual thing looks like

>>5934664
I have one, I felt a bit disappointed from the start and I still don't know why. It's the 3.0 version of Unit 02 with the extremely long rifle and two knives. The paint job is... only okay. It has some bleeding over the wrong lines and the details are lost on the small size. I have more problems about the joints and the way it's built so overall I was wouldn't buy another. The paint job on the accessories is better though.

The time has come. I want to buy the only evangelion missing from my collection. It's fucking unit 05. Is the evolution version worth the 5k yen they ask? Should I just take the 2.0 one for 2k? The thing that bugs me the most is no torso articulation

File: ShamrockAndFriends1.jpg (339KB, 1596x996px) Image search: [Google]

339KB, 1596x996px

>>5933393
>What character is the girl with the wings?

Nanael. However, her body under the dress comes with sculpted on "milk" and a "spilled milk" accessory for her milk bottle which is basically just a cum shot part effect. So if you want to display her nude, well, just be aware she's literally covered in "milk".

Guys whats the best gurren lagann fig? i know some are old so im not sure of the actual quality...

File: CtffnRQUEAIEIe6.jpg (74KB, 1200x900px) Image search: [Google]

74KB, 1200x900px

>knee to ear contact
Can based Yamaguchi just make every figure ever?

>>5938232
Just certain characters

File: revoltech-003-devil-may-cry-3-dante-kaiyodo-427411-MLB20555737731_012016-F.jpg (186KB, 1166x1200px) Image search: [Google]

186KB, 1166x1200px

>>5938232
>wants every character to have weird shoulders and hunchbacks
no thanks
I liked Yamaguchi better when his style wasn't as weird and poisonous.

Weren't all those Assembleborg's supposed to re-release in Sept? No news on that?

>>5936843
Old one is shit weak leg joints. Maybe weak arm joints too iirc. Evolution is the only way to go.

>>5938387
They're all out dude.

>>5938175
Can't go wrong with GL + Wings version. Enkis are weird in the way he made the chest work. The rest are all fine though.

>>5938387
Just got payment request from amiami a few days ago, shipping out now.

>>5938550
>>5938704

Which ones would be worth picking up? Just out of curiosity. I tend to like square-ish, chunky mecha stuff.

>>5938350
revised Dante when

File: 1380676981125.png (2MB, 1800x2000px) Image search: [Google]

2MB, 1800x2000px

>>5939590
Before Ryu Hayabusa but after Guts.

>>5871422
looks like kagami from naruto

so anyone got their assembleborgs?

When's Arthur going up for pre-order? I need some GnG action in my collection, especially for my annual Halloween displays.

>>5948509
>>5948511
>>5948513
>>5948514
>>5948515
>>5948517
Something feels "off" about this figure. I think Deadpool looks spectacular but something about this one is kinda turning me off. I love Spider-Man, I love Revoltech, so I should love this figure but for some reason I'm not feeling it for whatever reason. I'll still consider it as a purchase but I'm unsure.

Loving the interchangeable eye pieces, though. They look great.

File: humberto ramos wolv.jpg (98KB, 688x1044px) Image search: [Google]

98KB, 688x1044px

>>5948517
>Dat neck
finally someone that can do Humberto Ramos' Wolverine justice

File: image.jpg (142KB, 599x626px) Image search: [Google]

142KB, 599x626px

>>5948521
Revos always look off to me but this looks like a good mcfarlane-y spidey to me with lots of spidey poseability. Love the eyes.

He is looking off to me because he looks like retard blackie in these pics. >>5948517
Not sure if intentional.

>>5948511
Magnet piece is a nice touch. I do like how Kaiyodo puts in extra thoughts to increase play value like they did with Tazchikoma, including pull-back motor and magnet stand pieces.

Curious to see how PO will go down this time.

>>5948517
They should stop posing the necks jutting out so much. They did the same with Ultron and yet having him in-hand made me realize how you can actually keep it nice and leveled without over-exaggerating how hunched he looks. I have little to no doubt the same will apply to this Spidey.

So why is there no problem when Bandai releases Star Wars character after Star Wars character on Amiami and HLJ, but Revoltech Marvel is a problem on the same sites? They're both owned by Disney. Hasbro has the rights to both properties. Can anyone explain that to me? I know there were problems with the Star Wars model kits, but not the figures?

>>5948598
Diamond and Mezco, who have the rights for collector Marvel action figures in the USA, are double cockblocking Kaiyodo and are only accepting cockloving apologies from Yamaguchi himself to loosen up their policies.
The toy business is really personal and all the licensing rights are done in the cockfighting rings underneath Disney's castles in Florida, Paris, and California.


Honestly, i don't get why people think anyone but Disney's lawyers through impersonal emails and letters ever get involved in this shit.

>>5948521
Yeah it goes too far in the whole DYNAMIC direction. The head is also shaped like a small balloon, Yamaguchi seems to do that a lot

>>5948509
>>5948511
>>5948513
>>5948514
>>5948515
>>5948517
WHERE THE FUCK DO I ORDER THIS

seriously, really tired of this "you can't sell it here because muh laws" bs that they're pulling recently.

Figma managed to do it just fine.

>>5948669
They were selling movie designs, these are straight up comic. Laws are probably different

When is that new revo spidey going up? I can't miss this!

File: BLACKED.jpg (182KB, 750x1050px) Image search: [Google]

182KB, 750x1050px

>>5948509
>>5948511
>>5948513
>>5948514
>>5948515
>>5948517

Black suit ver. when ?

imma need that deadpool ASAP. where is everyone getting him from now

>>5948760

http://mykombini.com/en/october-2016/5099-amecomi-yamaguchi-001-deadpool-kaiyodo-4537807013002.html

Figinstock that shit.

>>5948509
not really digging that glossy finish

File: 419FUsm9CZL.jpg (23KB, 500x500px) Image search: [Google]

23KB, 500x500px

>>5948665
I think the head might be the worse part, yeah. It doesn't look like there's the shape of an actual person's head beneath the mask in the sculpt. It's a shame because I think Deadpool captured that very well.
Also those knee joints still look pretty abnormal. From some angles it's fine but the wall crawling pic really sticks out to me for that reason and just for how the legs jut out.

It's kinda weird how the first revoltech Spider-Man, as outdated as it is, has better knee joints due to the sculpt not being cut.

>>5948509
>>5948511
>>5948514
>>5948515
>>5948517
AW YEE FUCKIN BONER!

Made new one >>5950247