Daibadi/Polynian General: Summertime Robot Edition

File: Polynian Mel 1.jpg (92KB, 926x650px) Image search: [Google]

92KB, 926x650px

Reposting from last thread

Finished production model of Mel.

File: Polynian Mel 2.jpg (91KB, 975x650px) Image search: [Google]

91KB, 975x650px

>>5783819

File: Belmont Gloves CG.jpg (107KB, 892x462px) Image search: [Google]

107KB, 892x462px

CG Model of Belmont's Hands

File: Pinkle 1.jpg (52KB, 440x695px) Image search: [Google]

52KB, 440x695px

Photos of Pinkle's prototype

File: Pinkle 2.jpg (61KB, 440x757px) Image search: [Google]

61KB, 440x757px

>>5783825

>>5783825
>>5783827
A must get

So being a hamhanded retard, I broke the peg on one of my clover's knee joints. I recall the joints are actually a basic hobby joint I could buy, anyone know which one would fit specifically?

>>5783974
You are looking for Hobby Base Ball Shape Joints G grey Part number PPC-Tn11.
Something of note, at least the joints that I have a slightly different finish then my shamrocks original joints, they are slightly more matte. But it is nothing to noticeable and I think with time they would even out.
Also each joint in the figure has a custom peg length and a sightly smaller chamfer around the peg but that is nothing you cant fix with a few minutes with a hobby knife.

>>5784033
This is the most informative and complete post answering another anon's question I think I've ever seen. Well done.

>>5783111
>No bulge

No buy.

Really, really sad here. A manly robot with a huge bulge would have been the perfect companion for the trapbot.

(The trapbot tops. Every time.)

So as I said in the last thread I'm planning on making a custom gray Shamrock, but I'm unsure what I should make.

I think Tomo (The guy that made the bunnyboy shamrock) is going to make a Nurse, so that's out.

I'm thinking Cowboy trap, Fluffy sheep robot trap, or possibly incubus devil trap.

What should I go with?

File: 30b8733846ac6aae73f163e55dd54d4f.png (180KB, 750x500px) Image search: [Google]

180KB, 750x500px

Are there any lolis in this series?
I want a cute robogirl but I don't care for the baloon tits.

>>5784038
Thanks, I happened to have a package of them laying on my desk at the right time.

>>5784391
Are you envisioning a cowboy cowboy with boots, spurs and a lasso or a trap cowgirl with cow print lingerie and bovine horns? If it is the cowgirl I would be partial to that or the incubus/succubus trap.

>>5784397
Switch the chest of any robogirl with Shamrock

>>5784378
>trapbot
>top
This is my fetish

>>5784033

Include this shit in the OP from now on, since there seems to be so many QC problems with these fucking things and joint breaks seem common.

Also do Revoltech joints fit these guys?

>>5784451
I meant cowboy cowboy, hat, spurs, vest w/ tassels, boots, and chaps, definitely chaps.

>>5784500
I'll add it in the the next thread. Its the most detailed explanation so I was already thinking about it. And yes, revojoints fit the polynians.

>>5784397
There are. Well, there are child Polynians. I think I have a pic somewhere but I cant seems to find it. If I do I'll post it.

File: Faggot.png (134KB, 707x270px) Image search: [Google]

134KB, 707x270px

>>5784378
>Not wanting the trapbot to fuck the more masculine one with his huge donkey dick

File: image.jpg (113KB, 600x600px) Image search: [Google]

113KB, 600x600px

>>5784397
>>5784548
Yeah I knew I had it. Was just buried in my phone. Like I said though, these be children. But part-swapping could let you make your own loli when and if the time comes.

>>5784609
Morphine-kun stop being a bigger Polynian fan than me.

>>5784570
Because I want to be the one bending over for the trapbot.

>>5784033
thanks man, I hate breaking stuff, but at least I can fix this one.

>>5784609
That 10 year old Polynian is cute CUTE!!

>>5784639
I fear that may be impossible anon, my love for the Polynians runs deep.

>>5784690
Yes is are anon! A total QT 3.14

>>5784765
>Yes is are
The hell is wrong with me. Meant to say- yes she is

>>5784609
How... organic... are these robutts? I mean, a regular robot can just be build to be whatever age you want to made it look, why would be relevant to notice if they are 10 or 20 years old?

In fact, why would you build a child looking robot?

Other than milking the pedo cow, which wouldn't surprise me coming from /d/aibadi.

>>5784779
>why would you build a child looking robot?
You know exactly why

>>5784779
Well, the clothed Polys came after human and robutt cross-breeding so maybe one of the traits that carried over was the act of growing/aging? The Polys could start off small and maybe the body reaches a point where it doesn't age/grow but we (humans) continue to count the number of years.

As for the motoroids they're seperate beings from the Polynians. While the Polynians came from space, the motoroids were made on earth my the humans and polynians as an artificial robot life form.

Also loli's are real polular so of course they'd make some.

>>5784786
Damn right. to put him in a blue suit, and give him an arm cannon.

>>5784609
where can I buy these?

File: 1429669080408.gif (820KB, 275x207px) Image search: [Google]

820KB, 275x207px

>>5784905

>>5784807
MOrphine-Kun did you translate the site or something?

File: IMG_4590.jpg (2MB, 3456x2592px) Image search: [Google]

2MB, 3456x2592px

IT'S
LIT

File: Aye.jpg (151KB, 574x471px) Image search: [Google]

151KB, 574x471px

>>5784907
Buy which anon? Polynians in general or the child Polynians? The Polys can be bought at sites like HLJ, Amiami or any other inmport shop that would sell figures and such. Now as for the Poly children those aren't even out yet and wont be out for awhile.

Links incase you need/want 'em:

HLJ
>http://hlj.com/scripts/hljlist?GenreCode2=all&Word=polynian&x=24&y=13

Amiami
>http://slist.amiami.com/top/search/list?s_keywords=polynian&submit=Search&pagemax=40

>>5784934
Maybe....there is info floating around out there too, just have to look.

>>5784961
Morphine-Kun do you moonspeak?

File: image.jpg (970KB, 3076x3080px) Image search: [Google]

970KB, 3076x3080px

>>5784975
I might. Or i might use translate. Well, I'm actually working on it as I can speak it pretty okay. My goal is to be able to read moonspeak by the end of this year.

>>5785029
I'm kind of in the same boat. Though I imagine I won't be considered literate for a few years, my Kanji is terrible. I'm hoping to get a job in Jap-land to change that though.

File: image.jpg (253KB, 1080x1080px) Image search: [Google]

253KB, 1080x1080px

>>5785260
Well good luck anon, wish ya the best. Hope it all goes smoothly.

In the mean time I leave you all with a picture.

>>5784779

They're literally space aliens that kinda look like robots.

They can have sex with people, and bear human children even.

They grow up and age, and act like people, for the most part.

File: FIGURE-018960_19.jpg (50KB, 480x800px) Image search: [Google]

50KB, 480x800px

Need more shotabots!

>>5785444
where's our barabot?

File: IMG_2336.jpg (180KB, 602x920px) Image search: [Google]

180KB, 602x920px

finally a use for my old revoltechs that I had boxed up.

>>5784609

I think you can track down the gashapon drossel set. They used to be abundant on ebay.

File: Cm8OXzMWIAQwB0x.jpg:orig.jpg (283KB, 2048x1726px) Image search: [Google]

283KB, 2048x1726px

>https://twitter.com/GrafDe/status/751835475506266112

So what's the difference between the regular POlynians and Clover/Shamrock? Why are they naked?

>>5786169
>So what's the difference between the regular POlynians and Clover/Shamrock? Why are they naked?

They were among the first "generation" of Polynians that arrived centuries ago.

The clothed ones are from more modern times and have integrated into human society/culture.

>>5786169
Yeah,>>5786175 is right. Clover and Shamrock were from the first generation of Polys to arrive on Earth. The clothed Polynians; Yume, Mel, Emile, Belmont, were the generation of Polynians that came after the Poly-Human cross-breeding years after the war and such. Motoroids are a different thing altogether.

File: 16586383659.jpg (159KB, 1280x720px) Image search: [Google]

159KB, 1280x720px

>>5785696
>Using King Gainer parts
Do the dreadlocks parts fit in the head already or did you modify them?

File: IMG-20160711-WA0084.jpg (714KB, 1456x2592px) Image search: [Google]

714KB, 1456x2592px

So my shamrock came today and I've been playing with him all day

File: image.jpg (203KB, 1200x900px) Image search: [Google]

203KB, 1200x900px

More custom Shammies. Original Shammy transforms.

>>5786280
What line are those parts from?

>>5786205
They fit with no modding. I was worried I widened the holes for a sec, but they seem fine.

I'm trying to get my hands on an original Shamrock for under 150, but all I can find is eBay scalpers, even Mandy has nothing.

>>5786303

They need to just rerun them. The aftermarket price is fucking retarded.

>>5786315
You think they will? I mean with the gray flesh it feels like they're going the bandai "Same but different colors" approach.

>>5786323
IIRC Daibadi mentioned it would consider reprinting the originals if there were enough demand.

>>5786323

I don't know if they will. Nothing they do makes sense.

Instead of rerunning the originals, they spit out shit grey versions no one wanted.

Instead of fixing their QC problems and replacing shit, they put out that stupid tape image.

Instead of admitting they did sloppy paint work, they just removed paint altogether.

File: image.jpg (243KB, 1200x900px) Image search: [Google]

243KB, 1200x900px

>>5786303
>>5786315
>>5786323
Pretty sure they'll rerun then eventually. Seeing as how they were rereleased once already, they might do the same with the greys and after Belmont and/or Pinkle, they'll think of re-issueing them again.

>>5786297
Unfortunately I dont know anon. The look like peices from mecha model kits to me but I couldn't tell you for certain or give specifics.

>>5786333
Don't really want to start another arguement in the thread but Daibadi does plan to release grey versions of other Polynians in the future so having plain grey bodies for part swapping makes some sense. As for QC problems on Yume, I recall them saying that they had trouble with the factory they were using and changed midway into production I believe. The paint work though is a whole other can of worms.

>>5786247
I need to go buy some balloons....

File: 4303621653_f3c9d3f7f5_o-550x.jpg (63KB, 550x733px) Image search: [Google]

63KB, 550x733px

Hey guys, after a little peeking I managed to find one of these on Mandy. What ball joints will I need for her?

>>5786330
>>5786333

They did a re-release of Clover, but I guess everyone forgot about that.

>>5786421

They didn't release enough if the price is still sky high obviously.

>>5786399
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

I AM JELLY ANON. I AM SO GODDAMN JELLY RIGHT NOW.

Is there any way you can make a recast of it and sell me one? I will pay you more than the 10k in yen you spent.

I'll even throw in my older bigger Aphrodai A Daibadi kit, the more lewd one.

>>5786426

Lots of figures get re-released, and the price drops temporarily, and then jumps back up.

It took figures like Figma Samus and Link almost 4 or 5 re-releases before the price stabilized at retail.

Fact is, they re-released Clover. And their prices never even really went up all that high until they had been out a while.

It isn't really their fault when you came into the line late and you missed the boat. Twice.

File: IMG_20160711_153505.jpg (1MB, 1603x2048px) Image search: [Google]

1MB, 1603x2048px

Fun discovery: the person that helps design Polynian also does official -Gundam artwork for model kit boxes.

Have some Virtua On Polynians.

File: 502daaea6b064.jpg (56KB, 720x720px) Image search: [Google]

56KB, 720x720px

I guess here's as good as any place to ask. I have been trying to track down this fucking figure for an embarassing amount of time. I'm losing my mind here. I'm willing to pay any price to get my hands on her. Does anyone know any resellers/recasters or should I just keep haunting mandy and yahoo auctions?

>>5786518
Sweet find anon. That entire first line of designs would be must buys for me if they were made into figures a la Polynian.

File: Perspiration.jpg (81KB, 500x500px) Image search: [Google]

81KB, 500x500px

>>5786429
Shit. Sorry dude.

Fuck man I'm not that experienced with that kind of thing. I would be willing to try, had I anything even close to the tools or skill.

If there's a recast group out there or anything akin to that you know of however I'd be willing to work with them.

Also, should bog standard globe joints be good?

>>5786554

They look like Hobby Base or Revo joints to me.

File: 1757278.jpg (41KB, 600x600px) Image search: [Google]

41KB, 600x600px

>>5786545
You're out of luck, senpai. Daibadi/Dimension Diver doesn't make more of those anymore and for some reason nobody has done recasts yet, your only chance is finding one in jap auctions

File: ByhSKVcCYAEyH5E.jpg (32KB, 600x800px) Image search: [Google]

32KB, 600x800px

>>5786557
That's what I figured. Worth asking, though. I'll get her someday. Even if it kills me.

>>5786429
>>5786556

You know what? Give me your e-mail. We can work something out, I'm sure.

>>5786561

I'm >>5786556

I just suggested some joints that look like they might work. I'm not looking for those figures. You sound like a cool guy though Anon.

>>5786562
Fuck. Well, thanks for being honest, my request still stands for that anon. Just throw me your e-mail and we can figure something out.

>>5786569
E-mail is [email protected]

Thanks anon, I didn't expect you to actually be interested in working something out!

>>5786596
Sent you a message, then. Thanks dude.

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>5784391
If you want to make a maid, revoltech Airi would be good to cannibalize

>>5786758

Are those Ariri's lower legs too, or are those from something else?

Also pretty sure Nanael (same line, revo's QB), her dress fits the Polys, could've sworn I saw some pics with them wearing her dress.

>>5786768
They are. The problem with Nanael's dress is that it's molded to fit a chest with breasts so there will be a gap unless you use a Clover torso. Ymir, Alice and Melona's dresses can fit Shamrock just fine though.

>>5786775

Which Alice? Probably not the Boost version, huh?

File: image.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>5786780
Nope. Loli Alice. Sorry for all the phone pics. Can't get to a computer lately.

>>5786554
Not the anon looking for a recast, though I'm kinda interested too.

You might try the Gunpla or Custom thread and ask if anyone does resin recasting. I think Richigo has done some in the gunpla thread and I know there was another anon who recast some guns, or maybe it's the same guy.

Recasting tends to be expensive when outsourced since it needs some decent equipment, but I think most people will give better prices with scale, so a group buy of about 10 or so would probably be ideal. I know some resin GK shops would do special order recasts of old stuff if they had 10 or 15 orders, but they did it themselves.

>>5786554
dont do it anon, recasting usually destroys the thing you're recasting. not worth the risk bro.

>>5786934
What on earth are you talking about? I've been recasting shit for a while and I have never "destroyed" my original.

>>5786807
Shit, really? I wouldn't mind commissioning someone for recasts at all. That'd make more people happy in general! Do point me in the direction of some of those shops with recasting options, I'm completely clueless to it.

I'll ask the customs thread and Gunpla generals when I have the kit in hand. I'll have to write that dude I contacted about this.

>>5786791
>The gap on the skirt made his bulge more notorious.

Lewd.

>>5787039
Not sure about how a professional place would handle it since you'd be recasting someone else's product. I know there were some guys on Hobbyfanatic who did recasts so you might be able to ask there.

>>5787248

It'd be a recast of some ridiculously unknown by normal people garage kit from Japan. For all they know it's a custom.

>>5787248
I'll check it out. I'll also just cross my fingers I get that invoice soon, I'd really like to pay quickly since some dudes have trouble with Mandy like that and I like being prudent.

>>5787248
Actually forget Hobbyfanatic. Looks like the site is basically dead.

>>5787276
Oh, well never mind that then.

>>5787274
Well even if you do find a professional place it'll likely be much more expensive than some guy on /toy/. The best way to find a good recasting service is probably to be in with a community that has members that do it like those people who make those expensive dolls caked in make up or people who build resin kits of waifus.

Hobbyfanatic had a few guys who did recasts because they had a decent GK scene, Gundam and other, but at a glance it looks like the place is basically dead.

File: CmrpgsPVIAAtXhZ.jpg (66KB, 800x640px) Image search: [Google]

66KB, 800x640px

Can I post creepy robutts?

>>5787798
I cannot unsee the lefthand one just having a goofy long-ass leg arm.

File: CmrpG32UIAENZ1E.jpg (51KB, 800x640px) Image search: [Google]

51KB, 800x640px

>>5787808
The other side might help you.

>>5786399
WAIT HOLY SHIT

ARE THERE MORE OR IS THERE JUST ONE??

SPOONFEED THE BABY

>>5787878
On Mandarake? Just the one I picked up unfortunately. I haven't gotten an invoice yet, though I did get an "order acknowledged" email.

https://order.mandarake.co.jp/order/detailPage/item?itemCode=1046054645&ref=list

However because it seems multiple people are quite interested, I really, really want to find a recaster so multiple people can enjoy the kit.

If anyone here could help out that'd be great too.

File: file.png (214KB, 771x657px) Image search: [Google]

214KB, 771x657px

Yeah, NOOOOOPPPPPPPEEEEEEEEEEEE!
Fuck you!

>>5787981
>tards think these things are worth $200

Jesus.

File: img_973980_56504308_5.jpg (19KB, 300x400px) Image search: [Google]

19KB, 300x400px

>>5787906
Hey there, Original recast request anon here. I just wanted to let you know I think its really cool that you want to share with everyone! I actually have another Daibadi kit, the old Strike Witches Neuroi(Pic related), that I'd also like to get recasts of the share with anons that are interested.

So I'd like to work with you if possible on finding a good recaster!

>>5788029
>>5787906
Now if we could get an anon who has DD's Brass we could get a recast of all the DD treasures

>>5788029
Oh shit, you're the guy who put up his email? I sent you two messages, sorry about that!

It's really cool to see that you'd be up for trying to get more recasts into the world as well. I still don't really know where to look, but I've still been trying. I was thinking of asking the Gunpla threads, Customs generals, and /tg/ if necessary here on 4chan.

>>5788039
That's only if we can find a recaster at all. Help please!

>>5788055

/tg/ might know as much or more than the Gunpla folks.

>>5788060
Maybe so, but I'd like to ask the Gunpla guys first. I posted in both the /m/ and /toy/ threads, so far to no avail, but I'm going to try again.

>>5788055
Oh, you did, I responded, but it looks like you didn't get the e-mail. At any rate I like this idea more than your first one.

I'll try and find a recasting service today, so I'll let you know if I find anything.

>>5788039
Brass shows up every now and again, along with Pepper Cat. Someone managed to find the DD Purple Samus kit years after it was sold, so anything is possible!

>>5788074
Try sending your reply and any addends my way again, my internet is some serious shite.

[email protected]

>>5788062
Ask /tg/ and /diy/. /diy/ has a pretty wide variety of skills and tabletop game players are known to make bootlegs because figurine for games like WH40k are obscene. I've only seen a handful of guys on 4chan's gunpla general that actually work with any resin much less enough to recast stuff.

>>5788074
Considering how long I've been chasing Brass, I'd be willing to pay almost any price. I'll keep you updated if I ever get her, senpai.

>>5788113
Will do, soon.

The one thing I'm still worried about is getting the item at all, seeing as I haven't gotten the invoice yet and I went SAL. It's only been a day, but still.
Also, still didn't get an email yet from request guy. It's only been an hour but if you did send it again there's probably some internet issue somewhere.

>>5788159
If you're in the US SAL will take about 3 weeks most likely. 2 if you get lucky.

>>5788159
Just sent you an e-mail. Hopefully you got it.

>>5788074
DD did a Pepper Cat? And its still available? And I'm only learning this now?

Fuck.

>>5788309
My mistake, just looked it up and it's not a DD Pepper Cat, it's someone else, but they also made a Brass as well and they were both sold at WF Summer last year.

http://www.fg-site.net/archives/295583

>>5788335
Oh my fuck

>>5788335
I dunno, I've stalked the sculptor's twitter and never heard him say he got a liscense for them, never saw pics of the kits, never saw pics of his table, never saw anyone who bought one's pics. He recently made a St. Nurse and posted her besides Brass and Peppercat but that's it. I don't think they ever made it to wonderfest.

>>5788494
I've seen Pepper Cat on YJA before. I'm certain of it.

File: CUal1e1UYAAEM1T.jpg (41KB, 600x450px) Image search: [Google]

41KB, 600x450px

>>5788505
I know there's one really good Peppercat out there, but I don't know who makes her. Regardless, I wish Medabots had enough merch that we could make a general and not just leech of Daibadi's thread.

Aphrodite A is officially paid for! The search for a recaster continues, however.

File: image.jpg (84KB, 640x840px) Image search: [Google]

84KB, 640x840px

>>5783742
;^)

>>5788860

I didn't know CLAMP was doing some Polynian art.

>>5788860
That bulge though.

File: adorable_roboscout_by_necrobern-da1qz2e.jpg (729KB, 950x1247px) Image search: [Google]

729KB, 950x1247px

>>5788860
What's with this image? Why's it shrunken?

File: image.gif (382KB, 400x263px) Image search: [Google]

382KB, 400x263px

>>5788992
>>What's with his head? Why's it shrunken?

Fixed

File: image.png (96KB, 413x612px) Image search: [Google]

96KB, 413x612px

>>5788992
Shamrock fan art is better.

>>5789039
>>5789046
If I'm gonna be completely honest with you I only posted that image because I remembered who that artist was. You can check his DA, he hasn't changed in years, weird ass bodies and all.

I'm not a shota man.

>>5788568
>make prepainted medabot line
>release metabee and rokusho
>line is kill

>make plastic model medabot line
>release metabee
>line is kill

I just want Sumilodon, Peppercat and Arcbeetle. Maybe even Cyandog or Brass. Meta and Rokusho are both overdone and to me, boring designs. There are so many other great designs in the franchise but they only ever focus on the posterboys. I know this sort of problem isn't unique to medabots but still.

Anyway, apologies for interrupting the Daibadi thread, just needed to vent.

>>5783974
Fuck man, had the same thing happen to the grey Shamrock I got a couple days ago. Found out the Hobby Base joints can be ordered off of amazon, but it says it will take a month to get here.

File: IMG_0803.jpg (840KB, 2448x2448px) Image search: [Google]

840KB, 2448x2448px

Went to a yard sale today and spent $5 on a box of random Gundam parts. What else could I use to customize my polynians?

#inb4sumretardhurrdurrotherpolynians

>>5789355
Don't Revotechs use the same peg diameter? I suggest getting some Revos, even some non-human bootleg Revos like the Warrior Alien.

>>5789355
Yeah, >>5789379 is right. Revoltech joints fit in with Polynians so you could use parts from revoltech figures to part-swap. I would suggest the Assemble Borg line, which consists of several joints and parts to build different figures with. They're currently up for PO all of which come out this September I believe.

Oh and if you want to give them more action oriented parts go for some of the Muv Luv mechs. Some of them are under $20 on Amazon.

Amazon links incase you wanted 'em

Shiranui Type-94
>https://www.amazon.com/Revoltech-Muv-Luv-Alternative-Shiranui-Type-94/dp/B006G4F1CQ/ref=sr_1_2?s=toys-and-games&ie=UTF8&qid=1468410805&sr=1-2&keywords=revoltech
Terminator
>https://www.amazon.com/Revoltech-Muv-Luv-Alternative-No-011-Terminator/dp/B007E5OG22/ref=pd_sim_21_2?ie=UTF8&dpID=515b0yHhJrL&dpSrc=sims&preST=_AC_UL320_SR288%2C320_&psc=1&refRID=X2X109AK08SYG14CZBF9
Super Hornet
>https://www.amazon.com/Revoltech-Muv-Luv-Alternative-No-004-Hornet/dp/B005QULRN8/ref=pd_sim_21_4?ie=UTF8&dpID=51N-wWX9HLL&dpSrc=sims&preST=_AC_UL320_SR230%2C320_&psc=1&refRID=SWMCEQM1A9Q84ZZJ18ZA

I listed the ones with Prime so you could get 'em fast if you wanted. The first is also under $15.

>>5789412
Gah, forgot to link the Assemble Borgs.
>http://hlj.com/scripts/hljlist?Maker1=kyd&cl=1&Word=Assemble%20Borg

>>5789708
OOOH.

Anyways, progress on Aphrodai A recasting so far is going okay but not great. We have an anon who may recast her if it comes down to it, but looking around on /m/ and /tg/ has so far yielded nothing. I'm going to be reposting my recast request/commission in the next Gunpla general, but so far there's not been any takers.

>>5789123
>Cyandog
I have a softspot for that guy.
Warbandit and Gokudo would be cool too.

>tfw america had a shitty ass team of little indians for some reason so no a-10 thunderbolt eagle medabot

>>5789729
How many recasts do you want?

>>5789801
I'd say at a minimum six to ten.

>>5788992
>They have a Patreon
>$3 a month

File: 1458277553442.png (440KB, 633x758px) Image search: [Google]

440KB, 633x758px

>Still no payment request for Yume on HLJ

File: image.jpg (59KB, 549x566px) Image search: [Google]

59KB, 549x566px

>>5789123
>>5789797

There's a Cyandog model kit.

>>5789999
You're probably fucked bro.

I'd say go ask BST I got mine a month ago for close to retail. I had mine backordered for a month or two now and I just gave up.

>>5789145
Why not order from HLJ, dumbass?

>>5790115
Is this the right joint pack?
http://hlj.com/product/YLSPPC-TN11/Sup
Not that anon, but I couldn't even find these earlier because they have "globe" in the name instead of "ball" like all the other Hobby Base joint packs in this style.

>>5789836
Do you have a budget?

Where do you recommend buying clothes for them? Clover specifically.

File: image.jpg (153KB, 750x1019px) Image search: [Google]

153KB, 750x1019px

>>5789999
The Yume thats up on HLJ looks like its the re-issue set for November. Its the only reason I could think of since its still up while Shamrock is gone. Seeing as how every other retailer has given her two listings (original and renewal) and has Yume listed as "Out Of Stock" and HLJ still only has the one listing and its been in "Backorder". Plus HLJ is a bit slower with updating their site and they're doing inventory now which slows down confirmations and such.

>>5790031 is probably right, go try your luck in the BST maybe you get lucky and are able to nab one there. Other than that you'd have to wait for Yume's fixed version in November.

Just checked, Amiami currently only has the renewal version of Yume up for order.

>>5790125
Those look like them, yeah. The whole "globe" over "ball" name thing got me too.

>>5790140
Clothes with sleeves look somewhat awkward on Polynians since they have the higher shoulder bits on them but if you dont mind that certain Picco Neemo clothes look good on 'em. There's new sets up for PO right now for later this month too. As for Clover the swimsuit seems to look great on her. Other than that others use the clothes from the Queens Blade figures from Revoltech, like the anon who put Alice's dress on Shamrock. Though not all QB figure clothes seem to work if I recall.

>>5790133
Not really, no.

I would prefer to avoid spending something outrageous like $1000 or so alone, though, if that means anything. I thought and think it'd also be best if other anons contacted the recaster for purchases intended for themselves.

>>5790155
Forgot the link. My bad.
>https://hlj.com/scripts/hljlist/?SeriesID=5473

>>5789999
There's one on mandy right now you could probably snag. I'm just waiting for the reissue cause I hear this run has problems.

>>5790155
Queen's blade panties fit, but on Shamrock it's a bitch of a stretch because his dick.

>>5790158
You should try and see if there's really demand for it and secure some orders and then ask around. I don't think any recaster is willing to take a risk of trying to make their money back on their own. Plus you could make a little profit from it too since you're in possession of a fairly rare item.

>>5789797
What. Everything about that last sentence was bad.
I agree with the former though, Warbandit for life.

File: 4303621653_f3c9d3f7f5_o.jpg (108KB, 461x614px) Image search: [Google]

108KB, 461x614px

>>5790524

I'm not sure exactly how to 'secure' people' sorders, but I'll give it a go, here and now. I'm not sure whether to repost this on other boards and threads as well, but I won't for now.

Alrighty fellows, if you'd like to buy an Aphrodite A kit, then vote here. This is to gauge the best course of action for a recast effort.

http://www.strawpoll.me/10742260
http://www.strawpoll.me/10742260
http://www.strawpoll.me/10742260

>>5790598
The BST is probably a good place to try too. I'd like to say /m/ as well but sometimes I wonder about those guys over there.

>>5790601
Well, I've put out the poll in the BST, now.

guy who broke his clover knee a week ago: amico just sent me a shipping number. RSAL, but a number. so yeah, replacements for factory defects are a viable option from amiami.

There's a gray clover on YJA for 10 bucks, but it's missing a thigh. You think I could get a replacement from Daibadi?

File: I feel dumb.png (13KB, 335x238px) Image search: [Google]

13KB, 335x238px

Maybe I shouldn't have put in all those options.

>>5790598
Hey anon, have you found a recaster? I've worked a little bit with resin in the past but it was really just trying to make junk like beam sabers for gunpla.

If you're serious about and want to take a risk this contact me at [email protected]. I'm willing to get a pressure chamber set up and other necessary equipment to get as close as possible to perfect recasts, and practice before I recast anything of course. I don't think a vacuum chamber will be necessary with smooth on's mold making silicone but that's also a possibility. Anyway, if you're interested email me.

>>5790799
I am serious, but I've also already been talking with another dude on recasts for now, so we'll see how that goes first.

>>5790799Hello from /tg/, was gLiving the recast anon advice there.
Having worked with Smooth-On, a pressure chamber is completely unnecessary for the
Oomoo silicone, but you'd still likely need it for the resin. It's wholly possible to get a bubble-free result, but if you're going to be producing them, probably best to bite the bullet on that investment.

>>5790859
Don't encourage spending just yet, nothing's yet been finalized.

>>5790859
Yeah I think the pressure chamber is a required item. The vacuum chamber is up in the air. It might be useful for drying 3D printer filament but it looks like a proper set up is pretty expensive. A pressure chamber on the other hand would be like $300 to set up with a Grizzly paint tank (or other OEM) and one of those pancake-tank compressors from amazon.

>>5790864
I was considering getting back into resin stuff anyway. I guess it depends on how my custom 3D printer turns out. it's FDM but I'm hoping it will be able to print ultra fine details, if it doesn't I'll have to get stuff printed at shapeways, finish it, and then recast in casting resin.

>>5790759

Just saw that too. I wonder how the heck it ended up like that.

Tempted to try and get it so I can replace my Shamrock's buldging crotch with her smooth mon pubis.

>>5790759
make a peg leg

>>5791751
>100000
I think you mean 10,000 sen.pai

As of writing this poll's gotten 37 votes. I'm really surprised at how many people voted. I'm guessing it'd have gotten even more had it been posted on /tg/ or /m/, or the Gunpla general.

The real question, however, is how many of you voters have worked with resin before!

Anyways most people are either in the ~$30-49 or ~$50-69 camp. The kit retailed, and I got it for, about 10000 yen, or ~$100. I guess most peolpe think of it more like a Polynian that needs extra work?

File: Surprise.png (12KB, 301x229px) Image search: [Google]

12KB, 301x229px

>>5791758
Yeah I screwed that up. I was literally rewriting to fix it and my new, messed up post showed up a second after yours.
Fuuuck.

>>5790552
The American team was terrible.
Sure, they worked as a team and cheated with tech that was too advanced to be ruled yet but having a country of a couple hundreds of millions appear with three of the same robot was off-putting.

Got Shamrock today but the front flap cover thing is like severely warped and bent up. After looking at it more closely it seems like the clam-shell inside didn't get shut properly so it was pushing up on one corner and not letting the flap sit flush with the window. Combined with being tightly packed during shipping it caused a big ass warp.

Anyone else have this happen to them? Is it normal? Should I worry about it with Clover? I don't care about boxes that much but it is sort of annoying to get something not in perfect condition when the store in question has a "damaged box" discount on stuff but I didn't get any discount.

>>5791760

Just a note from a fa/tg/uy, but for anyone who hasn't worked with resin before:

That shit is toxic as fuck to humans and I assume, most animals. Do not inhale the dust if you're sanding it, don't get any of it in your mouth, etc. Wear a mask so you breathe without inhaling the dust or fumes (if any, when it's a liquid). Wipe your area off after you're done working with it.

>>5792026
Email them asking for the damaged box discount amount as a refund.

>>5792026
I'll let you know when I get mine at the end of the month with Mel.

>>5790789
it's not all bad man, at least you have an idea of what people would pay and how many people are interested.
At least 50 people are interested and most wouldn't pay more than 60/ 70-ish dollars.
I can kind of understand though, recasts aren't perfect and generally are an inferior quality. Factor in needing to paint it

>>5791762
So do you think the recast is going to happen? If it gets recast in colored resin I'd pay a little more, like $80 or 90.

>>5792982
I'm determined to see to it that a recast happens.

Colored resin however I dunno about. Pricing in the end isn't as important as just making sure the kit gets out to the world!

Oh yeah, and also both e2046 and GK-M offer recasting services! Interesting stuff.

>>5793025
Don't use e2046. Their recasts are shit quality. I've bought better kits from tiny Canadian recasters than e2046. I mean, it was years ago but just a montth or two ago one of the namefags in the gunpla thread showed they haven't improved at all.

>>5793028
Oh damn. What was the model? Do show. If you have any other means of comparing recasts do show. Alternative recast group suggestions'd also be nice.

Grey Clover finally showed up.Her knee joints seem just a little stiff at the hinge.

File: Right hand.jpg (161KB, 696x600px) Image search: [Google]

161KB, 696x600px

My Grey Clover has the right hand cut under the palm and the left hand has a twisted pinkie. I mailed HLJ and they can't send me replacement parts. The options are:
- sending back the figure for a replacement.
- sending it back for a refund (not interested).
- keeping it and getting a refund of 20% as store credit.

What should I choose?

>>5793197
The cut on the hand I would be able to get over, as for the twisted pinkie, I don't know, depends how twisted I guess. If its just these minor things and you could work with them, I would say go for the 20% store credit and use that towards another figure you want or another Polynian like Yume or Emil. Unless of course you want a pristine Clover, in which case go for the replacement.

>>5793197
Store credit

But that's because I'm picky about my figures, and I almost always get stuck with a worse looking one after exchanging.

>>5793197
>What should I choose?
-Unclenching your sphincter, and stop being so autistic.

>>5793050

I don't know of any recast services, just shops like e2046. I think hobbyfan is still active.

I'm pretty sure it was this, but like I said it was a while ago.

http://www.e2046.com/p/PMX-000+Messala/7594/

It's either boxed up somewhere or I tossed it during a move, but basically parts had a good of warping, nothing fit (from warping and, I'm sure, shrinkage), and surface detail was soft.

You'll have to ask the gunpla general for comparisons but I had some conversion kits from a small shop called cubeX (something like that). In comparison the cubex stuff fit well and looked mostly complete during test fits (some gaps here and there, but nothing huge) and was nicely detailed. I never got to finish them though so I either sold them or boxed them up.

In hindsight I regret selling some of it, I got my hands on some neat stuff like a VP Alex conversion and a Nu Evolve conversion for the HGUC Nu.

You can actually find Dimension Diver stuff on e2046 for cheap, but you get what you pay for as they say.

>>5788029
>>5788039
>>5788039
>>5788055
I'd be more than happy to buy recasts of Aphroditie from you.

I'd kill for a Neuroi Girl recast.
I'm almost but not quite desperate enough to sculpt one myself. Plus I hate working with alclad.

>>5793644
I'd be willing to sell you mine if it doesn't get recast.

>>5793236
>The cut on the hand I would be able to get over, as for the twisted pinkie, I don't know, depends how twisted I guess.
I was mostly afraid of the cut getting worse when moving it but it doesn't seem to be the case. The twisted pinkie is not too bad and I want to try to fix it by warming it.

>>5793282
>I almost always get stuck with a worse looking one after exchanging.
Yeah, with my luck, I'm sure to get a replacement with more problems.

So, store credit it is. Thanks for your advices, guys.

File: 594834.jpg (29KB, 443x788px) Image search: [Google]

29KB, 443x788px

So has anyone successfully panel-lined them yet? What did you do? I want to pretty mine up but I'm uneasy about messing it up because the plastic is so porous.

Hey recast dude, I sent you an e-mail with preliminary final details for the whole deal, along with forwarding that GK-M e-mail. If you didn't get any of that, lemme know!

>>5794263
cute horns, what are they from?

>>5794320
Msg skull massacre. Can't remember if that's the exact name but it's the scythe. Bought it for her only to be disappointed she can't hold it

>>5794263

Curious as to this myself. And if you used a gundam marker or something, please say what kind. Theres like a billion of the fucking things and not everyone is into that shit.

So when does the "Belmont" one come out, it's the only one of these things have any interest in.

>>5794409
She's still in development, as far as we know the prototype isn't even finished yet, much less a release date.

>>5794263
Won't pencil panel lining work? Easier to erase, no ink trail, etc.

>>5794409
So far only the CG work of her hands has been shown. They've expressed that they want to try and show her at WonFes though, so here's to hoping she is shown.

>>5794509
If the previous threads poor job was any indication, then pencil might be a safer bet for line work.

File: image.jpg (82KB, 750x829px) Image search: [Google]

82KB, 750x829px

More photos of Polynian designs being teased for WonFes. Seems they were added to the Daibadi event plan/booth. Cant wait to see full non-blurred pics.

File: image.jpg (165KB, 600x593px) Image search: [Google]

165KB, 600x593px

>>5794873
Is...Is that Reimu on the left??

File: image.jpg (14KB, 200x200px) Image search: [Google]

14KB, 200x200px

>>5794878
Yes it is anon. She was teased s while back too. Also this could be another shotabot but I kinda hope its a tomboyish robutt girl. Just seems to me like a tomboy would fit in with the rest of the Polys.

File: image.jpg (15KB, 200x200px) Image search: [Google]

15KB, 200x200px

>>5794878
Also, heres the slightly larger image in all its blurry goodness.

>>5794883
I hope it's a boy

>>5794887
I'd be okay with that too. If it is, it'll be my first male Polynian if I dont get arount to ordering Emil or going for grey Shammy.

>>5794895
I have no doubt it's a boy.

The question is, how shota is he?

>>5794883
I swear I've seen that guy before...

>>5794883
Hoping for a shotabot, but it looks like it's wearing a croptop and I won't be at all surprised if it's a tomboy.

>>5794964
Looks like the boybot from the grey shamrock box? But with clothes.

>>5795088
That one has purplish-brown hair in a clearly different style. This one isn't that boy, but I'd love for that boy to get a figure.

>>5786758
Requesting pics of Shamrock in Airi's full outfit. Fuck this is really tempting me to buy both

>>5795105
i was going off memory desu

>>5794263
I was gonna panel line my Shamrock but now that I have him in hand I don't think he really needs it.

>>5795137
Sadly, that's as much as he can get. Airi's top is molded to detach in the front to expose her breasts, but doesn't fully come off. I'm sure if someone was a talented modder they could get it on Clover, though.

>>5795079
Emil has his midriff exposed. Don't give up hope too easily.

>>5794263
I used a regular dark grey model paint and one of those think, pointed cotton swabs from a hobby store to do mine. I just wiped away the excess while it was still wet. It's uneven in some places, but passable. When I have my hands on a camera that's not my phone, I could do some detail shots.

>>5795079
I think it could be a life-vest, maybe it's a swimsuit boy to go with Mel Karon.

File: giphy.gif (542KB, 500x378px) Image search: [Google]

542KB, 500x378px

>>5794873
>robot reimu
I swear to God, Daibadi wants to kill me.

File: IMG_20160716_165000064_HDR.jpg (1MB, 1456x2592px) Image search: [Google]

1MB, 1456x2592px

>>5786247
hey anon how did you do that with your balloons? i did some stuff with balloons but its kinda hard to be accurate with them. [nospoiler on toy] sorry for ugly pic[/spoiler]

>>5795538
I'm kind of dumb and forgot how I got that type of cut, but I'll try to post a tutorial or something on how to make lewd summer clothes

>>5795630
thank you, i tried making panties before but the balloons we have here are ass. the best ive done is a tight t shirt which looks sketchy af
quick question, some of my joints are loose, and i have craft glue, would sticking some on the joint and the peg seperately help or should i use something else?

>>5795776
I use a little bit of future in the socket

>>5795792
future? like floor polish? i heard some people say they use that.

File: 2016071603.jpg (136KB, 721x1003px) Image search: [Google]

136KB, 721x1003px

These guys are a lot smaller than I expected.

>>5795794
Yeah, exactly like that.
In my country we don't have Future, so I use a "wax for parquet and laminates". In the back label says it works for wood and PVC and is like a wonder, I even use it to varnish scale models to a great success

File: image.jpg (150KB, 750x713px) Image search: [Google]

150KB, 750x713px

All right, looks like Daibadi's FB page was updated, sorry for being late.

Anyways looks like the Polynian designs on display will be for Reimu, who we already new was coming and the new Poly Lucio! And as the mentioned before, Vania's (Belmont) prototype will be shown off at the booth along with Pinkles. Can't wait to see how they look. Seeing as how these are two of the ones I look forward too, I hope they turn out great.

>>5795819
>These guys are a lot smaller than I expected

What did you expect?

They are 6 inches after all.

>>5795977
Fuck, I already fapped today...

>>5795820
Future is an acrylic. Any acrylic will do but wax is going to wear quicker.

File: IMG_6220.jpg (189KB, 1034x959px) Image search: [Google]

189KB, 1034x959px

>>5795904
>What did you expect?

Maybe half again this size. I'm bad at judging dimensions. Pretty happy with them though.

>>5796124

How big are poly's? Figma/revo size (1/12th roughly)?

>>5796238
About Revo size. Shamrock can wear Alice's dress pretty easily. Panties, too, but it's harder cause of his bulge.

>>5796238
Yeah about 1/12ish. Yume is like 5 1/2 inches and so are the others I believe. They look good next to eachother in case thats what you wanted to know. You can swap heads too since its just a 3mm peg. And like the other anon said some of Revo's QB clothes fir on the Polys.

File: Lucio-Art.jpg (121KB, 1280x720px) Image search: [Google]

121KB, 1280x720px

>>5795883
>Lucio

???

File: 2459567uy.jpg (100KB, 1401x788px) Image search: [Google]

100KB, 1401x788px

>>5796238
I snapped a quick size comparison with her next to a Starwars Black Series, a Busou Shinki, and a Frame Arm Girl

>>5796423
They kinda look like they're in the same pose to. Caused me to chuckle when I saw it.

Also Overwatch Poly style is something I didn't know I wanted to see.

>>5794883
Tomboy would be great. Already got a girly guy, so it fits in well with these other robos.
Although lets be real, short hair is amazing no matter what.

File: Snapchat-8325712381071204593.jpg (245KB, 1080x1794px) Image search: [Google]

245KB, 1080x1794px

HOOOO BOY, that was a lot more intensive than i had hoped. i tried to do the line flooding but the panel lines are so shallow that when you go to wipe off excess, it would wipe whatever was in the groove away too, so I had to paint every line by hand. It doesn't show up very well in pics, but it looks great in person.

It was still pretty easy and this was my first time doing it, I'm certainly not very light handed either. If you made a mistake you can wipe it off easily and if it dries a bit and cant be wiped off you can use nail polish remover (Mine was acetone free but I dont know if that factors in or not)

The top of the hip panel line and down towards the butt crack were the HARDEST to paint.

File: IMG_20160717_224243.jpg (2MB, 2336x4160px) Image search: [Google]

2MB, 2336x4160px

>>5796615
I'll probably go back and clean up a bit more tomorrow and maybe add another coat.

>>5796442
Can you put a ruler behind Clover? I don't collect Black series, shinkies or Frame Arm Girls.

>>5795819
I'm always surprised by the size of my new toys at first as well

>>5796618
cut your finger nails holy shit

File: rip.jpg (769KB, 2350x2470px) Image search: [Google]

769KB, 2350x2470px

Today I learned I probably shouldn't do panel lining. Or at least not with paint pens....
Also they are shiny because I pledged them. I'm planing on getting some doll clothing for them and I've had some paint transfer issues from that before and they looked even worse with just their torsos and upper arms being shiny.

>>5796780
I think the concept is great, it's only your execution that leaves something to be desired.

They look kinda evil in a fun way.

These panel line failure stories are hilarious and depressing.

>>5796780
I've seen worse.

How did you go about cutting his bangs and glueing it into place?

>>5796615
>>5796618
Your colour choice is pretty nice. Looks good!

File: IMG_6246.jpg (225KB, 1194x1005px) Image search: [Google]

225KB, 1194x1005px

>>5796729

These are really small for the packaging, and.. really, less than twice the size of a Lego guy, come on

Actually, anyone else think their arms are a bit undersized?

>>5796780

Seen worse. I like these a lot. Concept and colors are great.

>>5796824
A cheapo disposable scalpel from amazon and some jb weld clearweld.

File: 20160717_103745_HDR-1.jpg (1MB, 2813x1777px) Image search: [Google]

1MB, 2813x1777px

Ayy

File: Yoko Robo.jpg (61KB, 600x648px) Image search: [Google]

61KB, 600x648px

Recast effort anon here.

So things have almost been finalized, but first, there's one big question: GK-M or e2046? Both offer to accept donations of models for recasting purposes, however an anon has mentioned that e2046's quality is shoddy.

IIRC a while back there were a few dudes who purchased GK-M recasts of the TTGL female robots Daibadi puts out. GK-M still puts out those models, but if anyone can remember the quality of those recasts please do tell, so that the Aphrodite A GK can also be sent to the best possible recasters.

>>5796618
Cut your nails you disgusting pig. Jesus.

>>5796982
Any word on prices from either? Also, e2045 already has a DD Aphrodite A recast on their site I think.

>>5796970
You better be posting that art somewhere anon.

>>5797045
Here you go senpai.
Going to try colouring it later.

imgur.com/CYAdupT

>>5797120
thats awesome
do you have a place where you post your artwork?

>>5797120
Well, I'll be waiting excitedly for that then.

>>5797120
nice! definitely want to see this shaded/colored.

>>5797145
I used to post on DA but fuck that place. Stopped drawing for years though, gonna make a tumblr or something for my new shit. Still drawfag for /d/ and /m/ occasionally though.

>>5797158
I might be drawing some 5pg porn book of two shamrocks and a clover soon too. Daibadi's designs hit me right in the dick.

Anyone have any suggestions for bits to fit into Clover's gaping head holes?

>>5797165
Damn senpai. You've inspired me to take up drawing again, I was never much good, but I've always wanted to just throw myself into it, and draw for hours on end.

I tend to get frustrated and stop, but I'm gonna really try now. Seeing your pic was the last bit I needed, weirdly enough.

>>5797120
>imgur.com/CYAdupT
Y-you didn't just do all that with a marker right? You did a sketch or something first and used an under drawing.... r-right?

>>5797181
Jeez man, that's much better than the usual creeper comments I get on /d/. Glad to hear it man, only reason I'm drawing again is cause of Fatalpulse and Agata's new stuff.

>>5797185
Yes bud, I'm not Than,i need thumbnail roughs and pencils before anything.

Seriously though don't derail the thread because of me guys, I just wanted to provide content.

>>5796615
>>5796618
looks fucking awesome dude great job

File: legossssss.jpg (74KB, 634x1002px) Image search: [Google]

74KB, 634x1002px

>>5797213
inspired me to try drawing them too, but I'm not sure how yet.

also Clover's hair can take Lego pieces with a little wiggling.

>>5796732
>>5796994
>here we see toy not realize it's OK for a lady to have long nails.

I was supposed to be painting them originally

>>5797284
>lady
>collecting shota robots

I dunno if I'd ever believe that.

File: 007.jpg (164KB, 900x607px) Image search: [Google]

164KB, 900x607px

>>5797305
yaoi is aimed at women, and so quite a few stumble upon and get into shota too. speaking from experience here. i'm into bjds but i couldn't resist trap bot.

>>5797307
I'm still waiting for that tavern gangrape anon.

File: 001.jpg (158KB, 900x600px) Image search: [Google]

158KB, 900x600px

>>5797314
im sorry anon, i had grey clover on preorder but never paid it and let it get cancelled. im probably black listed at both amiami and hlj at this point, as i had let venom snake fall to the same fate. i just couldn't justify the cost and the lower quality, though now i kind of wish i had gotten grey clover anyway, just to do lewd poses.

>>5797305
>implying ladies arent into traps

not into yaoi tho, I just like bullying boys

>>5796780
Speaking of panel lining, anyone know if gundam markers would work well on polynians?

>>5797325
>I just like bullying boys
Go on...

>>5797325
I want to get bullied by a trap.

>>5797328
I'd say go with the fine tipped ones if you can, the other ones are a bit too big for the fine lines on the poly's.

>>5797349
I'm gonna make my Yume bully the fuck out of my grey Clover. Nothing cuter than getting bullied by a school girl.

>>5797359
I think I've got the fine-tipped ones in black, gray and brown.
That should be enough, right?

>>5797367
Yep! Line in the grey, black might be too much.

>>5797367
How fine-tipped are they? I've got some 0.3mm Micron Pigmas I'm probably going to try.

>>5797434
I can't find any reliable specifics, but they seem to be somewhere between 0.3mm and 0.5mm

File: Fem-bot-dom.jpg (1MB, 3080x4766px) Image search: [Google]

1MB, 3080x4766px

Did a sorta "Bully Yume" set and by sorta I mean I only took this one shot and it isn't even that great.

>>5797434
I actually think I might do this too. Been mulling it over a bit.

>>5796615
>>5796618
Really like how it came out. Nice color choice too.

>>5796780
These look like the assistants to an evil overlord or something, especially Shamrock.

I have been meaning to panel line my Clover, but I need a really, really fine point ink/paint pen/marker, anyone got good suggestions for some I could get for a reasonable price?

>>5797526
go to any sationary store, they'll have fine point markers, they might even have them in the "buy only one pen" section (no idea what its actually called but its got all the single pens in little holders all down the aisle) so you don't even have to buy a whole pack for one colour. You want a Fibre Tip Pen, stabillo is a brand I know, there's also Staedtler. I dont think brand really matters.

Ones in my country are listed at $5 but i'm not american so you can probably get em cheaper.

also if I can paint the lines using a brush that's any where near as tiny as 0.5mm I wouldnt worry about the nib size too much.

>>5797605
Um anon? I'm interested but theres no pic.

File: IMG_20160718_131430.jpg (2MB, 2336x4160px) Image search: [Google]

2MB, 2336x4160px

I bought some ice cream gashapon to use as implied penises in photo shoots and now I'm wondering if I could fashion a strapon but I dont think water-balloon's would work, as cutting a hole might make it rip when inserting...ice cream; I'll try it anyway. It's a shame they're a little big, but i guess that makes it more lewd.

>pic related, clover destroyer v.1

>>5797608
I know, hence why I deleted that post and am re-posting

File: IMG_20160718_131355.jpg (2MB, 2336x4160px) Image search: [Google]

2MB, 2336x4160px

>>5797610
Here's the bigger one

>Mega Ultra Clover Ass Destroyer v.2

File: lines.jpg (745KB, 666x1117px) Image search: [Google]

745KB, 666x1117px

How's my inking?

>>5797662
Looks great man! I'm glad we've got more people inking them, I only remember the one dude in the last thread had inked his.

>>5797610
>>5797619
Yeah I noticed when my post went up. It was still up when I was typing. Anyways, really diggin the names man. Good luck with the water balloons!

>>5797662
That is some fine inking my friend.

>>5797662

How did you do this, what did you use?

>>5797670
>>5797684

Thanks anons. I think I should've taken this example >>5796780 and used some weird color, and this needs some touching up, but I think it's an improvement.

>>5797526
I used Micron Pigma 005 pen and a paper towel soaked in isopropyl to wipe off the excess and stray lines.

So, here's a question: are there any good compatible hands out there for having my Shamrock hold stuff? This grey one is the first I've owned, and I've never had anything of similar size ever since I was a kid.

>>5797755

Since apparently some of the pegs in the Poly's will fit Revo joints, it's possible they could maybe use some Revo hands.

>>5797788
Would Figma or Figuarts hands also work?

>>5797793

No idea. I don't own any Poly's yet, merely parroting what others have said in past threads about Revo joints working with them to some degree.

I do want a Shamrock and Clover though, but those fucking aftermarket prices are crazy.

File: image.jpg (1MB, 3004x2988px) Image search: [Google]

1MB, 3004x2988px

>>5797793
Figma hands wont work since they use smaller joints that the Polys/Revos. Though some people have modded LA hands to fit. Here's a pic of the size difference. Took it for an anon in the last thread who had a similar question. Excuse the lighting.

>>5797808
Well, that rules out me getting one of the grey blank figma body figures.

Man, why can't I get a 3d printer capable of printing good enough quality parts for these yet, for like 20 bucks

come on it's the 21st century,.

>>5797755
They really should have ran Yume's holding hands in grey for him and the new Clover.

>>5797831
I was hoping myself to find at least something for these off of Shapeways, but all I found on there is a set of high heels for polynians.

File: image.jpg (112KB, 500x667px) Image search: [Google]

112KB, 500x667px

>>5797821
Found that pic of Shammy with LA hands. Dont know what was done though as in what was done to what part and all.

File: f9503156703f1f811e3d0f6a0f7abc34_1264.jpg (33KB, 482x768px) Image search: [Google]

33KB, 482x768px

>>5797007
It's a recast of a different Daibadi model. This model was in plain resin from the start and has more realistic proportions. The color resin one had colored resin from the get-go and a sculpt more similar to the Polynians in stature and proportion.

http://www.e2046.com/p/Aphrodai+A++Full+Action/7848/

There's no real way to gauge pricing from official recasters, unfortunately. e2046 seems to keep its DD stuff in the ~$30 range. The poll I took was more of a gauge of how many people want to buy it than what to price the recasts at, unfortunately.

>>5797886
Well apparently GK-M has better quality and they don't seem too expensive for in-stock stuff. I vote for GK-M.

File: xXBunnyShmexiXx1440626714-1.jpg (79KB, 550x365px) Image search: [Google]

79KB, 550x365px

>>5797893
Yeah, maybe a poll would be a good idea.

An idea me and recaster anon had been throwing around was making a recast of the original GK, getting it up to quality with the original, and then shipping that to a recaster. Perhaps something like this could be done to proliferate more recasts between GK-M and e2046, though I dunno if thy'd like it.

I'll throw up a strawpoll tomorrow.

Here's a comparison of the color resin kit, painted versus unpainted.

File: inked.jpg (973KB, 950x1004px) Image search: [Google]

973KB, 950x1004px

Inked both. I think Clover's butt benefits the most.

>>5797610
>hence why
Goddamn idiot.
Why do you fuckwads insist on using this phrase? Do you think it makes you sound smart or something?
You're fucking it up and you sound even more stupid than you usually do.
It's "hence", not ''hence why''. You're basically saying "that is why why.".
(And technically, in most of the places you idiots use it, the word you need is "thus".)

"I know, hence the reason I deleted that post..."
Or more correctly:
"I know, thus the reason I deleted the post...

>>5797801
>No idea. I don't own any Poly's yet
Then keep your yapper shut, faggot. If you don't know, then your opinion is invalid, and your input is useless.

>>5797165
drawfriend, I'd be very interested in commissioning some art from you.

Please send me a message at [email protected]

File: SmartSelectImage_2016-07-18-19-57-59.png (633KB, 1403x1206px) Image search: [Google]

633KB, 1403x1206px

>>5797915

Should I buy the Original Clover for 100 or the new grey flesh version for 35?

>>5798663
New grey.
You've missed out on original forever.

>>5797165
Can't wait for that porn book then. Hopefully you get your tumblr set up by then!

>>5798712
But I know where to buy clover for 100. I haven't missed out forever.

>>5798663
buy the 35 on mandarake, then wait for the white to get reissues.

>>5798774
I just put in an order for the White one, haha. you think they'll believe me if I told them I ordered the wrong version?

>>5798777
I sent them an e-mail asking about it. I figure worst case scenario I can just resell it and get my money back. Then buy the Grey. Or just keep it. Who knows.

File: 4303621577_74fdb3167f_o.jpg (117KB, 461x614px) Image search: [Google]

117KB, 461x614px

Strawpoll. Choose who you want to recast the kit more! Recaster anon will be making some regardless of what official recaster makes it.

http://www.strawpoll.me/10774399
http://www.strawpoll.me/10774399
http://www.strawpoll.me/10774399

If anyone has any information to sway voters then do please pipe up. This strawpoll will also go into the BST since the last strawpoll did as well.

>>5783742
I think it's time for a new thread morphine Kun

>>5799052
But anon, we aren't even close to the image limit or page 10. It isn't necessary given how slow overall /toy/ is.

It'd be better to do such a thing when one or both of those conditions is met.

>>5799052
>>5799087
Was actually thinking of doing it later tonight since I'm not home right now. So I'll have a new one up later tonight maybe if I can.

Man, I've been enjoying my grey Clover that I just got and fuck, I ended up ordering the shotabot today. These fellows might be addictive.

>>5799395
I'm very glad I got both, would've regretted having just one standing around.

>>5783742
Does Daibadi offer replacement parts? The hole in my shamrock's chest for one of his shoulder joints was drilled too large and it's super loose.

>>5799435
Yes, contact your seller or Daibadi.

>>5799439
How should I contact Daibadi? I bought mine from HLJ and I've heard they just try to give you a discount on your next order for things like this.

>>5799440
If its a factory defect I think HLJ will offer you a replacement. Seeing as how we had another anon who contacted them for minor broblems on his Clover. Otherwise you could try to contact Daibadi, try messaging them on FB or Twitter.

Still waiting on Grey Clover. Like a dumbfuck, I opted for SAL, because I was about to move, and addressed it to my new place.

It's taken LONGER to leave New York than it took to leave JAPAN.

>>5799468
I'll try HLJ.

>>5799511
dude, Japan to freaking Cali can take over a month with sal. You are going to be waiting a while.

>>5790598
Fuck, that figure is fantastic, but i don't have any money right now. How long would it be before the recasts are ready? I just need a rough estimate, i can't really commit to buying one if i won't have any money.

Also, as someone who's new to buying and owning high quality figures, how much is reasonable for a recast like this? My shamrock was around $65 AUD, but for a limited run of hand cast sets I assume more than that is reasonable.

>>5799566
Well, it's in New Jersey now. I'm reckoning either Wednesday or Thursday. I'm just kind of irritated that it sat in New York for like 13 days, but took only 6 to get out of Japan.

Mind you, this isn't the longest I've waited on SAL, but it's getting there.

>>5799602
I don't know what to say, but at a mimimum I'd put it at a month and a half, though I would expect more.

Me, I ordered the GK via SAL, so there's that, but there's also the shipping -to- the recasters and then the time it'll take for the recaster to make new figs.

Furthermore, the Aphrodite A kit is resin- the original is made of colored resin, but the recasts will likely be both slightly cruder and will need paint, and if you haven't worked with resin then you'd best read up because that shit is a health hazard. Additionally, the model needs its joints to be bought separately, namely the Hobbybase sphere/globe joints.

Most of the Dimension Diver recasts I've seen have been ~$30-40 from e2046 and ~$50 from GK-Model. By the time this thing is out you should have enough for it, but in addition if you're not feeling up to the model work you may want to find someone to help out.

File: 48a3903b5be4bcc6e3a26edcdcb629a71422835834_full.jpg (72KB, 640x414px) Image search: [Google]

72KB, 640x414px

>>5799623
Really the only daunting part is working with resin. I don't mind painting or buying joints for her. I'd actually like to paint her in different colours, the red and yellow is a bit glaring.

Has anyone bought the gurren lagann polynian recasts from gk-m? What did you think of them?

>>5799657
Honestly, if it wasn't resin, I'd love to jump at it. My body is so fragile though that I don't think it'd be smart at all to even chance working with it.

>>5799604
Oh, cool. Got here today.

New thread will be up in a bit. Thought it would be better since another long conversation or up more updates could come about WonFes or about recast anons journey.