Modding toys

File: 1448497504664.jpg (250KB, 1920x1080px) Image search: [Google]

250KB, 1920x1080px

>>5302834
A, theres a nerf thread.
B. Do some reasearch

C. Alright, im done griping, here are the basics of basics.

1, see these red circles? find the electric switches and rotate them then shove them back in so they are eternally depressed.

this will disable some of the locks that make stock stryfes so unpleasant.

2, See the green circle? underneeth that is some sort of mechanizm that prevents you from pulling the trigger unless the rev-trigger is already depressed,, Figueout which piece it is, and get rid of it.

3. Somewhere up top, but not pictured in this photo, i believe there is a piece that extends out over the clip chamber.. When you load a clip, a dart presses up against this,

This is the single worst thing about the stock stryfe, and is the easiest to get rid of, 90% of jams are caused by this piece of plastic, Get rid of it.
Past this, you can get a bit more advanced, Like Re-wiring it, and putting in stronger batteries,


Extending a mag is easy,, go buy a bigger one, the 12 or 18 dart clips are pretty easy to find, and if you really search you should be able to find an 18 or 32 dart drum mag.

File: stryfe mod.jpg (59KB, 736x489px) Image search: [Google]

59KB, 736x489px

>>5303132
Thanks.

I don't mind the safeties. It doesn't make sense to pull the trigger when the motors aren't running. It would jam. And without the mag nothing at all would happen.

I will look at the chamber once I reassemble it.

>>5303150
Not him, but seriously look into getting the locks removed. If you intend to take your mod the distance, you'll likely have to in order for the higher voltage batteries to work. The dart tooth lock is essential in increasing the rate of fire you can output. The entire switch for the rev trigger will likely have to be replaced to handle higher volts. Also the thermistor needs to be taken out if you plan to raise voltage in anyway, since it will lockdown the gun otherwise. There are several videos on YouTube that go over this entire process, so start there.

Lastly I recommend you keep it looking like a toy even after your paint job is done unless this is for a prop. The risk of getting into trouble with law enforcement isn't worth a "tacticool" paint job.

If you get rid of the mag sensor switch it allows you to keep track g while changing Mayan. Meaning you will already be at top speed and ready to fire the moment the new mag clips in.

>>5303916
That makes sense.

>>5303344
Right now I intend to keep the muzzle, magazine, and trigger in the original bright orange.

>>5303925
Oh man.. My spell check. I'm sorry.. At least you got the message.