WIP thread GW/Warhammer/general minis

first for
BENIS :-DDDDDDDD

File: wp_20170728_21_04_50_pro_36245792425_o.jpg (1MB, 2688x1520px)

1MB, 2688x1520px

>>54593393
Thanks, but I need some work... Like I said, for my next batch i'm going to paint the frames of the trays light brown, so if I miss any spots with flock, It'll look better than just having the black peek through.

Previous thread btw:
>>54572364

If I was doing a model for something like a Mister Rogers Neighborhood type show where it was going to be shown as if it was an outdoor shot even though it would never fool anyone, what would I do differently? I assume things like edge highlighting no longer work and a lot of techniques would be equally unhelpful.

File: 1501368557629.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

Rate my IW chaos lord

File: Comb29072017045734.jpg (1MB, 1632x3672px) Image search: [Google]

1MB, 1632x3672px

Put my crew on my basisilk, so it's finally finished.

R8 m8s

>>54594112
Looks interesting... I'll be able to judge it better when primed. Only complaint is the helm looks a bit plain for a lord...especially with all the elaborate fancy shit you did with the rest of the armour.

>>54594184

o.0 Is that Captain American's own personal Cannon?

File: what.gif (888KB, 450x252px)

888KB, 450x252px

>>54594224
What

File: _20170730_001036.jpg (781KB, 1853x3281px) Image search: [Google]

781KB, 1853x3281px

Nearly there. Just a bit of work on the seal, sort the base out and I think I might be done.

File: 13434924_1420203121339332_5696920266073186848_n.jpg (55KB, 960x717px) Image search: [Google]

55KB, 960x717px

Nah.

Greyjoy=best house

File: 13423714_1420203458005965_6549407717627539955_n.jpg (48KB, 960x717px) Image search: [Google]

48KB, 960x717px

>>54594305

File: z13406729_1420203441339300_5194684120778718761_n.jpg (45KB, 960x717px) Image search: [Google]

45KB, 960x717px

>>54594328

File: bloodletter.ref.jpg (693KB, 2268x2268px) Image search: [Google]

693KB, 2268x2268px

So as far as basic ground troops go, how's this look for tabletop quality (the gap aside)? I think I might highlight the horns, but I might wait until all units are at this level to do it first.

File: Displeased Squid.jpg (36KB, 350x350px) Image search: [Google]

36KB, 350x350px

>>54594328

>>54594305
Now, put it on a boat

>>54594305
Squid looks nice, but as per usual with these things the gold ends up looking flat and plastic-y on the knight. You need a good amount of gradual shading/highlighting or some other form of color modulation to make that paint work on so large surfaces.

>>54594184
paint looks nice, but i don't like the fucked up barrel

File: relic00126.jpg (2MB, 1920x1080px) Image search: [Google]

2MB, 1920x1080px

Has anyone used Rustoleum Color+Primer for minis?

http://www.homedepot.com/p/Rust-Oleum-Painter-s-Touch-2X-12-oz-Satin-Paprika-General-Purpose-Spray-Paint-249068/100670404

I'm trying to paint tyranids, picture related.

Also, I was in Michaels and noticed that they had their "Tiny treasures" merchandise on sale. It's designed for cute dioramas, but there's some flock and gravel that's perfect for the grim dark future.

>>54594648
I've tried rustoleum a couple of times. Avoid it, it goes on too thickly. If you're gonna go for cheap primers I would go with Krylon

File: 2017-07-29 19.32.59.jpg (174KB, 763x1183px) Image search: [Google]

174KB, 763x1183px

Got some bases done last night.

>>54594632
Ebay salvage

File: IMG_20170729_205938.jpg (2MB, 2880x2160px) Image search: [Google]

2MB, 2880x2160px

What do you guys think of my hammerhead

Trying to build some Aggressors at the moment, I hate whoever designed this kit, it's really going to be annoying to make it in sub assemblies

>>54594917
what the fuck is going on, you decided to make your Tau hippies?

>>54594701

The Krylon matte line is fantastic for a one-spray primer and costs 1/5 what GW Chaos Black does.

File: 1501271945585.gif (2MB, 245x246px) Image search: [Google]

2MB, 245x246px

>>54594917

>>54594917
Strip it, actually prime it this time and thin your paints, I guess.

I'm assuming this is secondhand.

>>54594964
For the greater good man

>>54594984
dude seriously why did you do this.

File: 20170729_150841.jpg (2MB, 2880x2160px) Image search: [Google]

2MB, 2880x2160px

Well I like what I see here for my wings. Now to do a layer of slannesh grey and a wash.

>>54595027
And some touching up of course

File: IMG_20170729_210833.jpg (318KB, 2160x1364px) Image search: [Google]

318KB, 2160x1364px

>>54594978
This was actually a childhood paint job I found at a friend's house while we were painting.

This is what I actually just finished

>>54595049
>insert maximus quote here

File: 20170729_191419-1.jpg (3MB, 2773x1803px)

3MB, 2773x1803px

Definitely thought my Flamebelcha would be bigger but I still love him, great model to put together. Now I gotta figure out the Howdah.... any ideas....

File: 2017-07-29 19.33.51.jpg (185KB, 838x1146px)

185KB, 838x1146px

I'm definitely procrastinating finishing these guys to avoid painting the metal bits on these guys. I want more wall bits now. I think they look nicer flying over obstacles.

What's a good way to paint scorching and exhaust soot on the jets?

>>54594808
So cut off the tip or fix it. It would be the easiest thing in the world.

>>54595349
That yellow looks grainy....

File: _20170729_220249.jpg (266KB, 1040x1367px) Image search: [Google]

266KB, 1040x1367px

Trial scheme for carcharodon successors. Feedback?

>>54595410
Fuck. Its not just me, then. I think the heat might have boned me.

File: photo_2017-07-29_19-53-54.jpg (88KB, 960x1280px) Image search: [Google]

88KB, 960x1280px

>>54594112
added the claw arm

How long can I leave miniatures in super clean before they turn into plastic stew?

>>54595481

Nice. Not too garish. I'd paint the body of the power pack the same as the legs and torso, just to stop the power pack looking like a black blob though. Leave the vents as is.

That bolter looks very operator-ish in that scheme. Looking good.

File: CameraZOOM-20170729210433625.jpg (129KB, 632x853px) Image search: [Google]

129KB, 632x853px

Disappointed, was excepting to get this guy done today after not being able to paint for a week but the highlighting on the armor and belt took me much longer than I wanted it to. Will have the rest hopefully done tomorrow but I am unsure if I want to put this level of work into all my Primaris.

>>54596040
best looking lamenter i've seen on here, if you get a whole army done like that it'll be amazing

How do avoid brushstrokes when brush priming? I've recently picked up some Vallejo primer because Texas has about 2 months out of the year where you can spray prime outside with no issues(Late March-early April and late October-early November). Airbrush is not an option for me currently.

>>54596556
Thin ya paints

>>54596556
thin primer just like with all other paints

>>54596647
>>54596598
I've done it with water and it leaves a horrible finish on the model and in places where it pools the primer starts cracking.

File: s-l1600.jpg (183KB, 1600x900px) Image search: [Google]

183KB, 1600x900px

If this was ten dollars cheaper i'd buy it

>>54596704

You're either using too much water or your water is too hard to use for thinning

>>54596728
I do have some liquitex flow-aid, but it did just about the same thing as the water. Should I dilute it, too?

File: IMG_0199[1].jpg (745KB, 2448x2448px) Image search: [Google]

745KB, 2448x2448px

Made some progress on my plague marines, finished 2 more and I'm making progress on n°4 and 5

Here's 1/2

>>54596721
Did you make an offer?

File: IMG_0206[1].jpg (959KB, 2448x2448px) Image search: [Google]

959KB, 2448x2448px

and 2/2

>>54596728
>>54596647
>>54596598
And on top of that, I've seen things that say NOT to thin the primer because it fucks with it.

How bad of a idea is metallic silver eldar?

>>54597187
use medium

File: image.jpg (648KB, 1936x2592px) Image search: [Google]

648KB, 1936x2592px

You guys were right. I got rid of the face with rebreather and forehead cut, and replaced it with this. I think it's a big improvement, and looks a lot more like an imperial fist.

>>54594917
Nigga you went back into 1992 childhood and smoked some oshkosh didn't you

File: inquisitor.jpg (225KB, 1056x480px) Image search: [Google]

225KB, 1056x480px

Still not sure how to paint the sword. An anon said to paint it metallic blue, another said to paint it black with green lightning, and a friend proposed sharpened bone color with dried blood. Neither are bad, but neither speaks to me. Any other ideas?

>>54597342
oh yeah, that looks way way better.

If I might suggest though, consider doing the stubble on the head by mixing your flesh color 1:1 with the hair color and watering it down a bunch, then applying it very thinly on the scalp. Eyes look awesome btw and I really like the pink scar. Not sure why I never thought to paint a scar like that before to have it stand out.

>>54597380
Paint it with this.
http://www.businessinsider.com/vantablack-vs-hubble-telescope-black-paint-2016-4

A nice blazing orangey fire blade would be nice though.

File: 16235823484_ccb5b59051_b.jpg (193KB, 1024x576px) Image search: [Google]

193KB, 1024x576px

Imperial Assault player coming from /swg/. Anybody here have input on urban-style basing in Star Wars like Coruscant? I have a couple Red Guards Where I painted the bases black and gave two of them a red glaze and two of them a blue glaze for the feel of Palp's throne room.

Just bought a Space Marine captain. Best way to kit him out? i play iron hands.

>>54597946
As a follow-up, all of my Cloud City Wing Guards and Lando have white bases with clear glaze. I want a distinction between Cloud City and generic urban.

I bought an electric drill for magnetizing and things, but realized that this shit might be dangerous when I hold resin/plastic parts with my fingers. Is there any tool/stand that holds small bits firmly? What is that called?

>>54598014
A clamp?

>>54597230
>How bad of a idea is metallic silver eldar?

I've seen it done poorly, and it looked like crap.

>>54595889
Ty, The power pack is done half and half. I just dont have an image right now.
Should I go for some Maori tattoos? I'm from NZ and i think I could do it justice.

File: img47a43ff5b1dd8[1].jpg (164KB, 500x2100px) Image search: [Google]

164KB, 500x2100px

>>54598075
>>How bad of a idea is metallic silver eldar?
>I've seen it done poorly, and it looked like crap.

Although this looked pretty cool.

File: 1471837331255.jpg (576KB, 795x2437px)

576KB, 795x2437px

>>54597230
it all depends on how well you can paint. a good painter can make anything look good.

>>54598039
Apparently (bench) vise would be a thing I was looking for. But thanks

>>54598151
>>54598269
>tfw you will never be able to blend this well

>>54594184
I appreciate what you did with the barrel, honestly. Looks good!

File: image.jpg (547KB, 1945x1018px) Image search: [Google]

547KB, 1945x1018px

With wolf guard terminators being more viable now along with being heavily variable I decided to rip the arms off of all mine, magnetize them then scrounge together every spare shoulder pad I could find to get a more weapon options for them

For starters I've got the standard melee in a land raider loadout

File: image.jpg (515KB, 1839x940px) Image search: [Google]

515KB, 1839x940px

>>54598341
Deep striking, combi madness suicide squad load out (sure hope I made the right choice going plasma instead of melta)

File: IMG_1949.jpg (1MB, 2592x1936px) Image search: [Google]

1MB, 2592x1936px

Just finished my first primaris marines.

File: image.jpg (659KB, 1907x1223px) Image search: [Google]

659KB, 1907x1223px

>>54598374
Along with the bonus of being able to customize them individually if they're going to be leading a squad of infantry, most of the options went towards my heavy weapon specialist who maybe providing more missile support for my long fangs

Thoughts on my kit bashed cyclone?

File: IMG_1950.jpg (2MB, 2592x1936px) Image search: [Google]

2MB, 2592x1936px

Getting ready to start on my Iron Hands Primaris.

>>54594300
Wheree do you get these

>>54598387
>helmetless primaris
disgusting

File: 100_1374.jpg (374KB, 1192x1868px) Image search: [Google]

374KB, 1192x1868px

When a model just comes out right

>>54598387
damn these look smooth... well done on the cleaness here...

File: vindicare_assassin_large.jpg (433KB, 1971x2611px) Image search: [Google]

433KB, 1971x2611px

>>54597946
>Anybody here have input on urban-style basing in Star Wars like Coruscant?

I have some models meant to stand on the battlements of Imperial structures for 40K. To represent that they are on a metal surface, I base them using cut out sections of solar window screen material.

File: wp_20170729_23_47_28_pro_35860636840_o(1).jpg (1MB, 2688x1520px) Image search: [Google]

1MB, 2688x1520px

So I just finished with these bases. My question is... they have little bits of rock and lots of gravel I've glued on..and I use foam transport cases and even from me just picking them up and normal wear and movement, how do you guys avoid them from chipping and the rocks coming off?

It seems like they're going to be constantly 'shedding' the gravel and rocks as I move them around...is there like a spray seallent or something?

>>54598686
folks always give marine players flak but kitbashes like that are one of the big reasons why theyre the most collected army, looks great

what chapter?

>>54598817
homebrew, Bearers of Light, now with chapter master

>>54598754
Thx. it's hard for me since i live in a basement and it constantly rains dust so smootheness is rare for me.

File: Screen Shot 2017-07-06 at 3.06.52 PM.png (121KB, 340x372px) Image search: [Google]

121KB, 340x372px

>>54594917
Fisher Price Tau

>>54598851
You're in a basement, where dust is falling from the ceiling constantly? What, are you in a secret bunker during siege bombardment or something?
>if so that's amazingly mood fitting

>>54598910
Live in my parents basement. It's an old house.

File: maxresdefault.jpg (44KB, 1280x720px) Image search: [Google]

44KB, 1280x720px

>wash brush in whiskey
>sip paint water

File: wp_20170729_23_47_20_pro_35860637590_o.jpg (1MB, 2688x1520px) Image search: [Google]

1MB, 2688x1520px

>>54598937
ha, no worries, I live in my folk's attic...much brighter thought and temps are ok.


Any advice on this >>54598808

>>54598966
>drinking whilst painting
How? I cant keep anything steady after more than a beer. Are you just old scotsman alcohol tolerance, or chinese drunken master levels of brush steadyness?

>>54597342
Love the scar and damaged cloudy eye.

>>54599508
Thats actually surprising anon, since alcohol is something of an advantage when it comes to steadying hands.

As in, considered a performance enhancing drug in shooting contests level of steadying.

How would you guys go about making a fat chaos worm thing (kind of like an elongated jabba the hut) with a baby doll face.
I want it to be largish and sitting on a chaos shrine throne thing attended to by cherubs. Anyone have any tips using largely GW models, or tips on doing it in general.

>>54599992
depending on your skills with greenstuff, use an actual doll head, make the body primarily out of fimo and greenstuff with a tin foil core, and kitbash the whole thing. Otherwise raid forgeworld nurgle pieces.

>>54600020
Any idea for the rest of the shrine he will be sat on? I want it to look like a creepy golden throne built apon the legs of a dunecrawler.

Anyone here know how to paint those grey/black Death Guard that were in this months White Dwarf?

I´d like them as some Black Legion allies.

>>54599674
Welp, my hands are never the steadiest at the best of times, but when i've been drinking they go shuddery and i wouldnt want to do anything more complex than basecoating vehicles.

>>54598311
Buy glazing medium and keep your paints thin. Blending is more of a test of patience than skill once you've got the basic techniques down.

Do you guys use Primer/Paint spray, or Primer only spray, than paint the base?

File: 20524333_1667504689989368_449121497_o.jpg (128KB, 1080x1920px) Image search: [Google]

128KB, 1080x1920px

Working on my numarines

File: 20170729_224931-1.jpg (1023KB, 2030x2463px) Image search: [Google]

1023KB, 2030x2463px

Still working on this big boy

Got the base to do and most of it is done so i glued it all together though some detail and highlight is left and i hate how thick the paint looks on this pic

I feel like im no doing the model justice though, any ideas?

>>54600502
Why he so bigg???

>>54600527
4 u

>>54600439
Why would you pick this color scheme

>>54600705
I was thinking of ideas and this one really stuck with me, I really like it. I have no idea what to call em though

>>54600502
>After months of being teased and belittled by the much taller Primaris Marines, the regular marines work with the Adeptus Mechanicus to develop growth technology.

>>54600766
The lemon limes
The mist twist
the gin and tonics

I'm working on a company of bikers for a chapter of mine based on the Cossacks. I'm desperately trying to find a good source for curved swords that don't look like toothpicks in even marinelet hands. Anyone have any ideas?

>>54600439
You madman you

>>54600502
It's a Minotaur right? Throw some subtle verdigris on there.

Do Eldar Harlequins ever show their faces? I want to mount a head, but I don't feel like asking for or buying a unit just for the head.

Thought of just using a general hanging head and maybe paint it up like a clown or something.

File: 03B2AF880000044D-0-image-m-75_1469191521724.jpg (135KB, 634x451px)

135KB, 634x451px

>>54600766
>I have no idea what to call em though
With that yellow and green?

The Cool Runnings

Just be sure to throw some red trim in there.

File: Screenshot_1.png (334KB, 862x479px) Image search: [Google]

334KB, 862x479px

>>54601042
I can't find a specific reason they wouldn't take them off.

>>54601042
Just go to your game shop and ask around and see if you can find a player willing to part or sell some heads. It's what I did when I needed some nid heads and most people are cool with it as people start to collect a lot of unused parts from their kits, heads being one of them.

But no, Harlequins never show their face because the dawn the mask to play the roll it represents, on stage or in battle. Their whole battle strategy and mannerisms are based off their masks.

I have a bunch of metal grey knights on 25mm slotted bases I need to move over to 32mm. If I clip off the metal tab how much of a pain in the dick is it going to be to get them on the 32mm bases?

silver or bone white skull masks for my Krieg grenadiers?

>>54598498

Ebay. Don't pay over the odds for them though. Buy them painted and strip 'em down. There are A LOT of scalping cunts all over these at the moment.

Theres a guy in Europe recasting a good portion Necromunda stuff too. I'm waiting to see if he makes some Arbites.

>>54600376
Any recommendations for medium? I don't want to drop $5 a pot for Lahmian if I can get a large amount cheaper.

>>54598117

If you're going to do anything like that I'd go for light on dark and maybe do a strip across the bottom of the left-hand pauldron.

I think if you do it in a darker colour on the lighter parts of the armour it'll get lost.

>>54601234

Not much. For all the metal models I've re-based recently I just used two-part epoxy glue.

Snip off the tab. File down whats left on the feet. Then drill a small hole in the feet to act as a well for the glue. It'll bond to the plastic better than the metal. So far I've had no casualties.

>>54601324
You can get get liquid acrylic glaze medium at any arts and crafts store. Liquetex is good. Lahmian medium is just the same thing put in a small jar and marked up.

Be wary of what you're getting though. They come in gloss, semi-gloss, and matte varieties.

>>54601097
>>54601134
Would using Green Stuff to just make a mask work?

>>54601633
Of course it could work. The question is whether or not you're a semi-competent sculptor.

>>54601796
Time to find out!

Could just cover half the face in nothing but smoothness and leave most of the other half exposed.

>>54598808
As much as I hate unpainted basing materials, your only hope is spray varnish. Eventually they'll shed tho.

File: WIP Dragon Warriors of Tzeentch.jpg (2MB, 2576x1932px)

2MB, 2576x1932px

I heard plasma was good now. Still very WIP.

Jesus it took forever to get the mask the way I want it to so it doesn't look TOO stupid.

Now I just gotta spray paint it and pray it looks like a harlequin head

>>54602165
Those CSM look pretty thicc desu senpai

File: 2017-07-30 00.48.54.jpg (773KB, 1574x556px) Image search: [Google]

773KB, 1574x556px

120 boyz, 40 tankbustas and 30 grots batch painted in 6 days

I need to take time away from painting after this

File: Black Plague Marines.jpg (410KB, 1392x816px) Image search: [Google]

410KB, 1392x816px

Any Idea on how the armor of these were painted?

>>54603144
mechanicus standard washed with agrax and highlighted with dawnstone

>>54603149
Thanks mate.

What's the best way to paint things without a base?

I've decided to start doing sub-assemblies (finally moving onto vehicles and elites) and I was wondering what the best way to prime/paint with a spray can (GW Chaos Black) was?

Normally I use the base that the mini's are on to hold and position for maximum paint coverage, but with the smaller pieces should I just leave them on their side and spray?

File: 1497254524984.jpg (456KB, 1600x1049px) Image search: [Google]

456KB, 1600x1049px

>>54603141
the absolutely madman did it

>>54603141
How the hell did you do that

File: p10c.jpg (207KB, 1173x1242px) Image search: [Google]

207KB, 1173x1242px

Does this paint look thin enough or should I try going further?

>>54603141
watdafak and I'm struggling with four models in three days

File: 1467913464381.gif (13KB, 250x194px) Image search: [Google]

13KB, 250x194px

>>54593911
haha ebin :-DDDD

>>54598488
>Iron Hands
Patrician taste m8

File: 1501399076134.jpg (43KB, 720x720px)

43KB, 720x720px

>>54594917

File: 1493920579115.gif (3MB, 684x340px) Image search: [Google]

3MB, 684x340px

>>54603141
Oh lawdy

File: priest card front.jpg (36KB, 372x500px) Image search: [Google]

36KB, 372x500px

Does the three color minimum include a black/white base coat? Generally speaking, not specifically for one tournament or another.

>>54604267

Nope.

File: FB_IMG_1501421276535.jpg (41KB, 1120x720px)

41KB, 1120x720px

Minor conversion on my Dunecrawler gunner. Don't waste precios stubber rounds on unworthy enemies!

>>54594184
Looks quite cancerous t b h

File: IMG_20170730_163424[1].jpg (2MB, 1836x3264px) Image search: [Google]

2MB, 1836x3264px

Wew lads i think i dont i´ve ever had to clip something annyoying out like the shoulderpads of rubric marines

Any tips for getting these parts flush?

>>54605073
good job mike, you did it

Why is it that there's a lot more people dumping NIB Tau stuff on Ebay compared to any other faction by a large margin?

>>54605312
How about a knife?

File: Imperium vs Tau.png (852KB, 1250x2820px) Image search: [Google]

852KB, 1250x2820px

>>54605351
Tau were OP in 7th, apparently they're not anymore. So a lot of WAACfags dump their grey robots on ebay.

>>54605351
>NIB?

also because most tau players are typically Waac fags and their index rules aren´t that strong anymore and are selling their shit out of anger i guess.

Boy i really hope they get strong rules when their codex rolls around, just so i can drink the taufag tears

>>54605312
I know exactly what you mean. For mine I used needles files.

>>54605396
the concave rounding makes it pretty hard with my x-acto knife

maybe someone would have a better way for that, i hoped

File: IMG_4678.jpg (473KB, 1920x1080px) Image search: [Google]

473KB, 1920x1080px

>>54593889
How to paint the following with GW paints

File: IMG_4680.jpg (453KB, 1920x1080px) Image search: [Google]

453KB, 1920x1080px

>>54605563

>>54605351
what does NIB mean?

>>54605579

New in Box

>>54597361
>>54598868
bingo

ive shaken my imperial primer as hard as i bloody can for a good `0 minutes with plenty of stopping and stirring to break up the chunks but it isnt getting any better than this..

is this pot fucked and worth replacing or can i somehow salvage it?

File: 20170730_171415.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

Continuing with my Blood Ravens. Comments and criticism welcome.

File: 1501425732300.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>54605700
wow good thing i attached the photo

>>54605720

This happens to my primer too, and very quickly. Don't know why

>>54605752
is it even useable in this state? ive shaken as much as possible and it isnt getting any better.

>>54605752
>>54605720
because its a rather bad product happens with all imperial primer

just get a rattle can

>>54605766

Most times for me, it gets one big clump and then has a thinner liquid in there with it. In desperate times I'll use the thinner liquid, only usually would have to use more than one coat to get an even layer

>>54605563
>>54605572
Doesn't the painter use GW paint names?
Just use these as starting point and pick appropriate highlights/shades for each.

>>54605976
Yes but they're not fully accurate, and then I need to translate them to the new range some of which have been discontinued
TL;DR Do shit feel happy

>>54603141
Just 32 models a day. Not that hard. But good on you, from one Ork Lord to another.

File: 20170730_164938.jpg (6MB, 5312x2988px) Image search: [Google]

6MB, 5312x2988px

Should I leave the barrel on? Or chop it off as connect the silencer directly to the gun?

File: Nurgle_fun (12).jpg (86KB, 709x709px) Image search: [Google]

86KB, 709x709px

Hello. I want to paint my Back Legion classic plague marines black (they are BL OGs, not DG offshots) but give them this Nugle feel. I don't want to paint them like on pic related (it's Death Guard scheme I believe). Any tips how to make it properly? Pics maybe?

/40kg/ failed me

blue tacked this guy together as a Praetor/Captain.

Does he look command-y enough? Anything I could add?

File: IMG_0606.jpg (2MB, 4032x3024px)

2MB, 4032x3024px

>>54606141
Fuck, forgot pic.

And yes, I know the yellow is thicc.

File: IMG_20170730_120002729-864x1152.jpg (277KB, 864x1152px) Image search: [Google]

277KB, 864x1152px

In the arms of an angel
Drown away

>>54606263
but why

>>54606114
I'd cut the barrel flush to the rest of the rifle. You might want to seal up the holes on the side of the barrel as well.

If I'm planning to run a chaos list with a dark mechanicus twist to it, are there any tech-thrall like models from third parties I could use to represent cultists? The only reason I'm not considering the obvious forgeworld HH ones is because they have a big old admech symbol right on their chest.

>>54600906
Fantasy Ogres!

Or maybe skeletons? They have a few scimitars. Dark Elves?

>>54606263
What is dead may never die.

>>54606007
there is a paint-conversion chart if you google it, dingus!

Anyone know the best way to make Calth mkiv legs look bigger so they aren't out of place with my Thousand Sons legs? I've tried just straightening them out of the squat pose and they're still too short.

>>54606263
in soapy depths, rest in plastic

File: Citadel Conversion Chart.jpg (463KB, 873x1200px) Image search: [Google]

463KB, 873x1200px

>>54606683
>some of which have been discontinued
I assume that's his problem but if not, 'ere he go

>>54606780
A popular way to lengthen Marine legs I've seen is to cut the lower legs roughly in half and put a plasticard disc in and gluing it back together.

File: store-spider_1100x.jpg (46KB, 716x850px) Image search: [Google]

46KB, 716x850px

What colour base trim / flocking and stuff would work best with this colour scheme for a slaanesh daemons army?

>>54606007
>>54606683
>>54606792
>some of which have been discontinued
>I assume that's his problem but if not, 'ere he go
In that case you could just buy Vallejo Game Color.
The paints are a near perfect match for the old range. Recently stocked up on them and all I can say is I love them.
And they are cheaper than GW anyway.

>>54606347
Stripping to convert a Manticore

>>54607012
The rocky outcrops with black trim like in your pic would definitely work.

>painting highlight of a glazed surface
>make a mistake
>no biggie if im quick I can use a bit of water to wipe that off!"
wipes off that section of glaze instead, now theres a big uncoloured splotch

AAAAAAAAAAAAH

File: Warhammer-Bitz-Vampirfuersten-Skelettkrieger-Schwert-A-Champion.jpg (60KB, 800x800px) Image search: [Google]

60KB, 800x800px

>>54600906
Theres a few on the skeleton warrior kit or the skeleton chariot kits, might find some on bits sites

File: gw 99800101095_WhiteScarsBikeUpgradePackNEW01.jpg (54KB, 600x620px) Image search: [Google]

54KB, 600x620px

>>54600906
You could just buy the White Scar stuff available.
The biker conversion pack has two guys with curved swords, and if you turn to ebay you can probably find the Deathwatch biker too.

>>54600906
>>54600906
>>54607271
Seriously, these guys even have the cossack hairstyle and ride bikes.

File: mastercrafted minis W-SCIM_img01.png (999KB, 848x729px) Image search: [Google]

999KB, 848x729px

>>54600906
and there are 3rd party bits as well of course

>>54603413
The Tyranid/BA rivalry is so fucking good honestly and I wish it was played out more. BA are the only ones that acknowledge how fucking much of a threat the nids are and it's such a perfect match for them in terms of enemies.

>>54607578
Aside from Ultramarines. Who even have a unit with official models named after that one time when Nids ate Macragge.
Or Scythes of the Emperor, whose fluff entirely revolves around that.
Or Space Wolves who got them in their Homeworld's oceans.

The BA/Nid rivalry goes mainly back to Space Hulk, it's only recently that GW pushed that into 'mainstream' 40k.

Not saying I don't like it, just saying the 'they are the only ones' part of your post rubs me the wrong way.

File: image.jpg (1MB, 1936x2592px) Image search: [Google]

1MB, 1936x2592px

Too poor for a Primaris Apothecary, so I made one myself

>>54607679
His arms are too long. Otherwise looks good

>>54607679
>>54607766
Yeah arms a tad long, are they fixed tight or do you reckon you could shorten them without my problem?

>>54607858
Shouldn't be an issue to shorten both arms.

In fact now you mention it, I'm suprised I didn't notice it earlier. They're like Orangutan tier arms.

>>54605716
It's looking good. what was your paint application process? What did you prime with? Looks nice and smooth

>>54606114

I like it the way that it is

File: duncan.jpg (80KB, 1280x720px) Image search: [Google]

80KB, 1280x720px

>>54596775

>thin your thinners

So what should a virgin buy before getting any models

>>54608028

....models. paint isn't going to do you any good without anything to put it on

File: wraithlord harlequin.jpg (185KB, 586x2299px) Image search: [Google]

185KB, 586x2299px

Hey /wip/, how's it going???
I'm in a great fucking mood! After getting a bunch of free shit, I've decided to make a Harlequins army! I'm almost finished building it, too!
I've got 33 clowns including Troupe Masters, 3 Shadowseers, 2 Death Jesters, a Solitaire, 3 Void Weavers, and 6 Starweavers!
I've built almost all of them, but painting? Haven't even gotten started!
I'm doing the diamond patterns too! Fuck that laziness where you just paint them in garish colors and call it a day. If you don't do the diamond patterns, you aren't doing it right!
Somebody please kill me!

Seriously, I've never done diamond patterns before. I'm not a bad painter, but Jesus I'm feeling like I bit off more than I can chew here. I've seen all the tutorial videos and everything, now how do I just get that little boost of confidence to get started with this shit?

>>54608028
Clippers, glue, knife.

Buy them along with the models.

>>54608028
>So what should a virgin buy
A prostitute?

>>54608042

Try it really well on pne small model first, and don't stop until you are very satisfied. Then finish the model completely. once you see how great it looks you won t want to stop til they are all done

>>54608028
>>54608050

This.

A set of clippers and a sharp blade are required

>>54608067
You don't 'buy' a prostitute. They are service providers.

File: 100_2618.jpg (317KB, 1097x700px) Image search: [Google]

317KB, 1097x700px

and done

the bumper's not quite right but I'll go back to that later

>>54608240
Your conversion on the Inquisitor is fucking awesome. Simple, but great!

>>54608042
holy shit

>>54608203
>Not owning a whore and renting her holes out

>>54608240
Still waiting on that Edelwiess anon....

>>54598966
You're not a true painter until you've done this with some kind of beverage.

>>54608240
>two pepperoni pizzas with extra cheese, on the double!

>>54601550
Here from last night. I see there's a bunch of Liquitex mediums, is there a specific one I should use for blending? I was thinking matte. And is there a difference between glazing medium and matte medium?

File: IMG_20170730_145006574.jpg (3MB, 5344x3006px)

3MB, 5344x3006px

Any advice on unfucking these power packs?

Thought I had set them properly but I guess I fucked it.

Side question, what color of spray should I use to base these guys if I'm painting Imperial Fists?

>>54608977
>how to unfuck the backpacks
Greenstuff

>Imperial Fists
White, grey or yellow

File: Screen Shot 2017-07-30 at 3.55.34 PM.png (664KB, 560x734px) Image search: [Google]

664KB, 560x734px

>>54593927
Thin your paints. Light your pictures.

>>54595791
Claw arm looks a bit too Orky IMHO.

>>54594356
Horns and the sides of the base and it's good.

>>54594917
Is that tempera paint?

>>54601234
You could also just use 32mm slotta bases.

>>54605720
I've heard good things about putting a stainless steel BB in there before shaking.

>>54606114
Leave it.

>>54606123
Maybe black with green ooze + a single green shoulder pad (like the deathwatch). See pic for other ideas.

>>54607012
Polished daemonic infused marble.

>>54608042
Those diamonds are sex. Whatever time you put into them, it was worth it.

>>54608977
Greenstuff or very well controlled UNthinned pain over the gap.

>>54609021
>>54609119
Alright thanks lads.

General question, new player to 40k.

I don't like the Skitari Vanguard Helmets and I prefer the hooded Skitari Ranger heads.

Is there an issue if I make Vanguard with Ranger heads?

>>54607984
I prime with GW Black primer and then just do a quick wash with Abaddon Black.

Red:
2x Layer Khorne Red. Don't worry about any of the other details on the model, just keep it thin.
Layer Agrax Earthshade
Drybrush with Evil Suns Scarlet.
Another Agrax Earthshade to darken everything a bit.

Shoulders:
2x Layer Zandri Dust
Shade Agrax
2x Layer Ushabti Bone

Then I work through and just do details from there.

>>54609424
>Is there an issue if I make Vanguard with Ranger heads?
No. It's YOUR plastic space army men, do whatever the fuck you want.

>>54609424
It's only an issue for WYSIWYG-fags, but since their guns are different anyway, everyone should be able to see what is what

>>54603141
do you have a sweatshop production line or something?

File: IMG_20170730_224631.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

>Beep boop loyal corpse worshipper, prepare to be annihilated

If I had money to spend on bits like I wanted I would totally do a whole squad like this.

>>54594305
>>54594328
>>54594349
Wipe the fucking cum off your camera. Jesus.

>>54603141
WAAAGH!!!

File: 2.jpg (7MB, 4136x2399px)

7MB, 4136x2399px

Can't decide how to base.

Right now I'm leaning towards Rhinox Hide with Ushabti Bone drybrush (the left one).
I'l be putting on bits of Valhalla Snow on them later.

Any suggestions?

File: img4f2e39f676550.jpg (146KB, 799x661px) Image search: [Google]

146KB, 799x661px

Does anyone know where can I get pic related? It's Mamon from FW but they stopped selling it some years ago

File: Collage 2017-07-30 16_03_55.jpg (688KB, 1440x2144px) Image search: [Google]

688KB, 1440x2144px

Ayyy so light box finally came in so I thought I'd take better pics of the typhus I did

>>54610162
I really like the left one too.

>>54610203
recaster maybe?

>>54610244
I've never bought from a recaster anon. I tried with mirandairene but they didn't accept paypal so I don't know where to start. I don't feel comfortable buying to them either but I suppose I don't harm FW buying old models

File: IMG_20170730_231500.jpg (2MB, 2336x4160px) Image search: [Google]

2MB, 2336x4160px

Thousand Sons Daemon prince WIP

>>54610326
ive bought plenty of recasts from ebay

you can usually tell by the price if its a recast for one

bought the FW great unclean one for 20 bucks took a little bit of cleaning up though

File: 1496104553064.jpg (154KB, 1024x514px) Image search: [Google]

154KB, 1024x514px

>>54610409
fabulous/10

>>54610409
That looks like it had some potential but looks really strange to me. I'd say maybe a different head or more armor could make it look less strange, like maybe if you were to use the bird head from the exalted sorcerer kit or something. Outside of that looks pretty neat.

>>54610573
I think if he had upper torso armor it would look better

>>54610593
Yeah, that would certainly help given the head choice.

>>54610573
I tried that head, looked strange and not in a good way.

>>54610573
That would be a bitch to convert.

>>54610409

That amount of fabulous looks more Emperor's Children than Thousand Sons.

File: FGDSGFDSGFDS.png (2MB, 799x1461px) Image search: [Google]

2MB, 799x1461px

>>54603413

>>54610648
`What can I say. I like my marines fabulous. Emperor's children are my next project

File: WIP.jpg (299KB, 1280x1721px) Image search: [Google]

299KB, 1280x1721px

I realize this is just a drawing, but If I had some transfers what is the best way to apply them and make it look like part of it is fading away showing the armor under it like these shoulders do? Can you literally take a knife to the back side of a transfer and scrape some away?

>>54610763
Drybrushing the colour of the surface on top of the applied transfer is probably your best bet

>>54610763
possibly drybrushing the original colour, then lightly glazing over the top of that with the same colour again.

File: 20170730_154742.jpg (359KB, 1133x1509px) Image search: [Google]

359KB, 1133x1509px

Skelle for SoBaH. Was nice to paint something a little messy for a change.

File: IMG_0864.jpg (1MB, 3242x1687px) Image search: [Google]

1MB, 3242x1687px

What squads have you guys been working on today WIP?

Just hand primed an assault squad, and a rhino for my Red scorpions, and my biker lord of Khorne for my chaos dudes

Gonna paint the assault squad in CODEX APPROVED camoflague circa the Angstrom incident from the Badab war

File: IMG_0865.jpg (43KB, 214x310px) Image search: [Google]

43KB, 214x310px

>>54611582
Pic related is the camo

>>54611616
That's gonna look fuckin cool. Good luck, Anon!

File: gallery_23369_1556_69910.jpg (101KB, 612x533px) Image search: [Google]

101KB, 612x533px

>>54611692
thanks anon

i wonder if any of our local space shark painters would dare to paint some of their dudes in camouflage

Cleaning up mold lines and assembling standard guys is the most boring part of this hobby.
even after all this time cleaning I guarantee that someone will point out a moldline i've missed once I prime everything

>>54611884
What's your army? I went through 50 Horus Heresy space marines last january. The trick is to make each individual have his own personality. Just attaching some granades or a knife helps a lot

>>54611884
I always try making my standard guys feel a bit unique so I like doing that part. (but I also dont play 40k or anything, I just paint) for me
>dealing with resin in general (getting rid of flash, mold lines, bending pieces, etc) is the worst
>priming/basecoating everything is a light chore
>figuring out a good color scheme for vehicles and such can be troublesome

File: 20170730_184710-1.jpg (792KB, 1152x1193px) Image search: [Google]

792KB, 1152x1193px

>>54611582
Not a squad, but I painted up one of my old snapfits. Kind of want to do a squad now but I don't think I could pull it off.

File: 20170730_184717-1.jpg (679KB, 1152x1105px) Image search: [Google]

679KB, 1152x1105px

>>54612115

>>54611582
assembled my first lot of Aggressors today, only issue I have with the kit is the fact that the heads need to go in first and thus I can't paint them separately like I normally do.

>>54612144
Stop putting your flag everywhere anon. I don't have anything against your country but this is just edgy

File: wut.jpg (4KB, 119x125px) Image search: [Google]

4KB, 119x125px

>>54612200
>edgy
How is that edgy? Or is this just bait?

>>54612162
Yeah its annoying. Ive been just painting heads first to get them out of the way.

>>54611582
Going to finish my flamers, brimstones, and screamers. Then maybe I'll work on my rubrics again or something.

>>54612115
Reminds me of the military power armor from fallout NV lonesome road
i like it anon

>>54612200
no idea how flags on armor are edgy

File: Lamenters 1.jpg (355KB, 1406x1321px) Image search: [Google]

355KB, 1406x1321px

First Primaris done. Highlights didn't come out so will in the picture so sorry for that. Was on the fence about putting this much effort into these guys but now that I see the finish result I'm going to do the same for the rest of them. Should have my whole army when 9th edition drops.

>>54612359
beautiful

>>54612319
American flags fucking everywhere are edgy. At least it's not like that guy on youtube who had his space marines painted gold with american flags

>>54612359
What colour did you use as that base tone?

>>54612410
Averland Sunset.

>>54612400
Thank you.

>>54612402
I think the word you are looking for is PATRIOTIC and not edgy anon

being enough of a petulant child to complain about tiny plastic american flags on an anime image board is edgy though

File: 1487224691936.jpg (87KB, 605x526px) Image search: [Google]

87KB, 605x526px

>>54612359
Top stuff anon

ive just started the hobby and have chosen thousand sons, and already i am super keen to start building it up and developing my skills at painting and assembling, and one of the things i really like the idea of is a avian tzeentch themed daemon prince with feathered wings and a bird head instead of bat wings and a typical daemon head.

what models would be a good thing to buy bits of for the wings and head? there are a lot of winged beasts in age of sigmar though not too sure about what size is appropriate, same with the head.

>>54612578
The Sanquinary Guard models have some good wings. Not sure about the bird heads though

>>54612359
how'd you get that snow? mine always comes out looking really slushy

pls spoon feed me I am stupid

what brushes should I get for starting out ,

>>54610162
>>its 7mb
But why tho

>>54612622
I work construction and one day I had to cut a fuck ton of PVC pipe. It was a big job so there was a specific station to cut all the pipe. Anyways under the saw there was a huge pile of PVC shavings that I thought looked perfect for snow. So I gathered up a big bag of it and use pva glue to stick it to my bases. It's really simple, get some pvs glue, use your shitty brush to spread it on your base however you like, then take a big scoop of your "snow" and dump it on the base. Let it sit there for some hours as the glue takes a while to dry. Then dump off the access, air off the particles, and there, snow.

>>54612664
You can probably find some starter painter set at a local craft store.

A few thin tipped brushes and one or two flat head brushes should do fine.

>>54612664
a medium sized brush, a smaller one, and a smaller-smaller one.

>>54610763
You have two options
>scrape the decal with a knife after you apply it
>dab a bit of the base colour overtop with a piece of sponge
Don't listen to the people recommending drybrushing. You're just going to make a mess that way and it won't look natural.

>>54602165
They are, but don't supercharge with named bros. Did that with Mephiston and lost him lol.

>>54612758
>>54612772

Thanks. will this do

https://www.amazon.com/gp/product/B007H4YR8S/ref=ox_sc_act_title_2?smid=AU2FNATHSFHNB&psc=1

I've been watching some Duncan vids and he talks about dry brushes. Should I find one as well or is that more advanced than a FNG should worry about?

>>54613373
those are just fine for starters, its what I started out with
dry brushing isnt that advanced. if you really want to do it, get a drybrush. you dont want to use a normal brush for it, because it ruins it real quick.

File: SW_Frost_Blade.png (202KB, 1000x242px) Image search: [Google]

202KB, 1000x242px

Any good alternatives for the frost blade? I like the chainsword look, but not interested in buying several upgrade packs to get all the swords I need.

>>54613456
The CSM sprue has about ten double edged chainswords. Needs some bits but it could work.

>>54609119
how does that anons claw arm look too Orky?
It's from the old metal Iron Warriors Warsmith...

>>54613627
He must have stolen it from an ork.

>>54613456
3rd party? Google 3rd party 40k bits for a nice list.

File: Evil-Craft-Chaos-Autocannon-complete-model-No-I-s.jpg (246KB, 800x800px) Image search: [Google]

246KB, 800x800px

>havocs are still finecast
>meanwhile pic related is what you can get third party
GW is steaming trash
Although indeed those are expensive, 16 per model.

>>54594300
What model is that friend?

>>54613814
looks like someone left a marine in acetone and forgot about it for a while

>>54613571
I've already looked through GW bits. Chaos chainswords just look like crude chainswords. Even with "double edge" they clearly have a front and a back.

>>54613752
I've done it. Very few that I can find. Only thing even remotely passable was some Kromlech thing, though it was fairly generic and more of a sword with some teeth on the edges.

>>54613456
there are cool in a pulpy kind of way
http://www.spellcrow.com/frost-weapons-p-395.html

I've also seen people just paint energy weapons ice blue. Would be good enough for me.

>>54613848
necromunda redemptionist

>>54613917
Why are SW the only ones with this type of weapons? I'd love to see a Salamanders army with swords and axes of chipped alien obsidian or something.

Just so that chipped alien ice weapons of the SW would feel a bit less retarded...

>>54608042
well you dirty eldar faggot, it's all about right angles. You gotta learn by painting checks, then turning them diagonally.

Seriously though. Painting gridlines is for faggots. Orient each diamond by painting the edge lines for it first and then filling it out. Then paint the next diamond parallel to it by linking the edges of the new diamond with the first diamond.

DIAMOND VISION

>>54614005
>Why are SW the only ones with this type of weapons?

Because even before they devolved into total wolfing wolfwolfs, the Space Puppies were are kinds of superduper special and got exclusive wargear left and right.

File: 20170730_174350.jpg (2MB, 2880x2160px) Image search: [Google]

2MB, 2880x2160px

My first metal model. Had problems with glue setting, but I just glued limbs one at a time while tackling other projects.

>>54614132
Wargear like frost blades and... Leman Russ Executioners?

>>54604166
Fantastic gif. I remember the game that this art style is taken from. Commando? One of the arcade games they reproduced over at miniclips when that was still a thing.

...Is there a warhammer version?

What is a good brand of glow-in-the-dark paint? I want to use it to paint my Malifaux Will-o-Whisps and Jakob Lynch crew

>>54614174
Looks... alien. I like it! Make sure you quadruple varnish that shit though.

>>54614258
It's a lictor, varnish? It's not even primed

>>54614258
The children among us think that metal is more susceptible to chipping because it does not bounce when dropped upon pavement.

File: CaptainF.jpg (118KB, 490x653px) Image search: [Google]

118KB, 490x653px

Finished all my Dark Souls stuff (though it's not re-based yet...so no pics) and I'm looking forward to starting on these Endure the Stars figs now. Here's the female Captain. Taking a break from KDM, though next up I think I'm doing phoenix armour.

File: CaptainM.jpg (155KB, 612x816px) Image search: [Google]

155KB, 612x816px

>>54614626
And here's the male variant of the Captain. Got my friend to do some 3d modelling for bases, printed them at home.

>>54614311
Does it chip easier?

>>54614739
In my experience, no, metal doesn't chip any easier than plastic (but this is with primed models; I'd imagine unprimed metal might be worse than unprimed plastic).

>>54614739
Let me ask you this:
When does a plastic mini chip? If you drop it or if you just throw all your shit in a box.
If you take good care of your minis while handling and in storage, then the answer is "about the same".
If you just throw your bag of minis in a corner when you come home you are obviously gonna have a problem, Mainly cause it is a lot heavier, though. But you don't treat glass- and tupperware the same either, so...

Most younger generations seem to have gobbled up the GW propaganda concerning Finecast being 'so much better' than metal, which was obvious bullshit even then. But if you never had a metal mini, how are you gonna know?

File: my second dude.jpg (293KB, 1440x2139px) Image search: [Google]

293KB, 1440x2139px

R8 my second attempt at painting minis.

First go I used nothing but paint I found at a craft store for cheap and didn't bother with washes or anything. This time I've got my hands on Citadel paints and washes and goddamn it looks so much better than my first guy.

>>54615201
>R8 my second attempt at painting minis.
breddy gud.
Honestly better than some stuff I've seen from people who have been painting for years.

So you are off to a good start. Keep it up.

File: OG Dude.jpg (92KB, 868x1194px) Image search: [Google]

92KB, 868x1194px

>>54615225
Thanks man. Trying to get as much practice with the whole process of painting before I crack into some 30k/40k minis.

Here's first guy for reference btw.

File: 20170731_123341.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

Finally got around to spraying my plauge marines and it kind of came out all munted and dusty. Should I cop it cause they are PMs anyway or what?

>>54615693
No anon, I just learned this tonight and trust me, it works. Take those minis to your sink and grab a toothbrush. Put some dishsoap on that brush and give your guys a light scrubbing all over for a minute or so. Rinse, let them dry completely. They will be silky smooth.

File: IMG_20170730_223414263_HDR.jpg (1MB, 1944x2592px) Image search: [Google]

1MB, 1944x2592px

>Spend a lot of time trying to figure out an Ork paint scheme for the kitbash Snakebite Orks you're going to do.
>Spend awhile painting a random boy I have sitting around.
>Immediately dissatisfied.
Boy I hate myself all the time.

Building some Knights. I've got a shit ton of them and I want to convert some of them, but I don't have too many ideas right now. Anybody got some good ideas?

File: IMG_0871.jpg (767KB, 3075x1058px)

767KB, 3075x1058px

Heres my work in progress assault/vanguard vets squads

One on the left is wip angstrom incident camo

File: Knights.jpg (74KB, 860x645px)

74KB, 860x645px

>>54615776
fuck, forgot the picture

>>54611034
>>54611473
>>54612824
thanks for the advice guys.

Hey guys what GW paint color is most like the corax spray paint?

>>54615880
Skull white

File: a00.jpg (58KB, 680x453px) Image search: [Google]

58KB, 680x453px

>>54604883

>>54615773
It's a bit thick but overall it's not bad. You just need some more practice with thinning paints and controlling how much paint you have on your brush. It shows a lot of promise, don't get discouraged.

What is and where to get a cheaper alternitive to greenstuff

>>54616061
It's called Kneadatite, Army Painter sells some for fairly cheap.

>>54609978

>mysterio-themed army

i fuck with it my nigga

>>54616061
https://www.amazon.com/Green-Stuff-Yellow-Epoxy-Putty/dp/B002MB61RQ/ref=sr_1_1?ie=UTF8&qid=1501471328&sr=8-1&keywords=kneadatite

File: 99239999076_CitadelCrusadeCase01.jpg (27KB, 600x620px) Image search: [Google]

27KB, 600x620px

I know this isn't exactly a WIP question, but does anyone know of any army cases that aren't going to gouge my wallet like pic related?

I have alot of vehicles / dreadnoughts.

>>54615977
Thanks, anon. I'm still trying to figure out how much water to how many brushfuls of paint on the pallet. I normally try two scoops paint to one water, but whenever I try more water it becomes soupy and drips on the model.

>>54616359
Battlefoam cases are expensive but well worth it. Far better than the shit that is Citadel.

>>54616359
short of DIY options? not really

Cases are always kind of expensive, hard cases especially.

>>54616359
>gouge my wallet

GW's cases are literally the most competitively priced on the market. They're cheaper than the better options available from other companies.

If you can't even afford the cheapest foam on the market, you're going to have to go with something like KR foam in cardboard trays instead of a bag or case, or do a homemade option where you buy cheap foam and throw it in a tub, a cheap metal toolbox and magnetize your bases, or buy a cheap camera or gun case and use that foam.