WIP Painting/Converting/Sculpting General

My vallejo primer is weak as fuck and scratches easy, I'm finding it hard to get good coverage with citadel primers outside, too.

CAN I JUST FUCKING PAINT?

>>47405611
I got good experience with The Army Painter Primer. Also doin it outside is waste of paint that gets caught by the wind.

>>47405728
See I'd have no problem with the canned primers but obviously the propellant is toxic so I can't use it inside.

>>47405728

Stop trying to hurt people's brains

>>47405611
Had the same problem. Threw it out and switched to ak interactive airbrush primer. They make a very nice surface to paint and are a bit more durslable. Still a polymer primer though so it is best to let it dry for 24 hours.

>>47405728
>I got high using The Army Painter Primer inside and soon I will die from chronic solvent-induced encephalopathy, to the net benefit of mankind.

>>47405865
See, at first I thought I hadn't let it cure long enough but then I left it over the weekend and it still seemed to not really bond to the plastic very well and really easily scraped off.

File: collage.png (3MB, 1687x1678px) Image search: [Google]

3MB, 1687x1678px

>>47405566
Here's a wip collage of my chaos marine Kill Team. The guy with the out stretched hand is a sorcerer.

File: collage.png (4MB, 2037x2029px) Image search: [Google]

4MB, 2037x2029px

>>47405966
And my wolves.

Noticed the size was retardedly huge so here's something smaller.

>>47406060
And that turned out to be way huger. My apologies /wip/

/WIP/, this is officially my first mini that I have painted. I don't have a lightbox, so I hope natural sunlight will do. Any advice moving forward?

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>47406101
Fucking, damn it. Here's the pic.

>>47406101
You could start by posting the mini.
:^)

>>47406134
>>47406131

>>47406131
>>47406235
As a first mini it's pretty good, especially on the face. I'd suggest cleaning up the highlights on the trousers a bit and doing something with the white armour; it looks a bit thick and bland, maybe do some sort of pattern on the gun/shoulder so you don't just have these big blank patches on the mini.

>>47406101
>>47406131
Looks breddy gud senpai, pretty crisp whites for your first mini. Don't see any mould lines either, which suggests you have lurked sufficiently. Overall, great job, keep it up!

File: sanguinary_priest_white_armour_guide.jpg (229KB, 641x889px) Image search: [Google]

229KB, 641x889px

>>47406101
>/WIP/, this is officially my first mini that I have painted.
>>47406131
>[actual picture]

It's a good start, anon. Can't see any moldlines, the face is nice, and the metals look good. My only criticism would be the white... have you considered starting with a darker off-white colour and then only reaching purest white-of-whites with the final highlight? I'm not saying you have to go overboard, like GW did with the Blood Angels Sanguinary Priest (pic related), but it looks more realistic to scale.

File: 20160223_194142.jpg (615KB, 2305x1369px) Image search: [Google]

615KB, 2305x1369px

Can't believe these 3 niggers took me 12 hours to make... Gonna switch the head on the right one, doesn't feel right

>>47405611
Caught a tip from Bobby Waldron (Gennesis models): cut the Vallejo primer with acrylic floor polish (@ 2:1 primer to polish). Speeds up the dry time a bit and toughens the primer.

>>47406323

I, uh, actually followed this picture for the white considering it gets posted two or three times a day.

File: WIP Skull Mountain 06 - 50pct.jpg (716KB, 1400x5765px) Image search: [Google]

716KB, 1400x5765px

>>47404654

Continuing from the last thread, adding some details to Skull Mountain.

Cut plastic barrels in half and them placed them into the "cave" area. I used pliers to hold the barrels while cutting so as to keep my fingers.
I added a lamp attached to the rock above these barrels, and another outside the cave entrance.
A street light was added in the corner with the door.
And finally I have added an emergency subterranean hatch at the basin of the cave under the skull eye sniper nest. This was pilfered from an old MK1 plastic rhino sprue.

Going to add a couple choice fortification walls on the upper level to provide some more cover and then on to sand.

File: 100_2461.jpg (358KB, 1446x600px) Image search: [Google]

358KB, 1446x600px

https://www.youtube.com/watch?v=P-1-PQRbD28

Needs some TLC, but I'm pretty happy with them considering I've been delirious all week. Technically converted, but it's just a case of using the deathwing command squad heads (and chainfist) for higher detail and a slightly more pleasant shape.

Got to pick up some wildflowers and gobbo green to properly finish the bases off.

>>47406288

I'll definitely hit up the trousers again when I break out the brushes again. Thanks, man. I agree about the shoulders. I don't have any fluff thought up for my dudes yet, but I'll consider throwing a unit insignia or something onto the shoulder.

>>47406296
Lurking helped. Thanks, anon. I just have a fucking mob of these left to paint and base.

What do you think about the scheme?

>>47406338
its more the arm that doesn't feel right.
And these Kharn groupies always look like this. Notice how on the Kharn model his shoulders, arms and hands are oversized (even by heroic standards)?
This is why.
Although the left guy doesn't look so bad. So you are partly correct, the helmet compounds the issue.

File: 2016-05-23_19.24.55.jpg (124KB, 1080x1080px) Image search: [Google]

124KB, 1080x1080px

So finished my first Necron today and my new Ballistari(i think that what it is called)

>>47406537
you need some propa-highlights to make those colours visible.

Atm it looks like a blob of dark patches and gold trim.

>>47406833
Yeah i forgot to get my highlight colour

>>47407074
you mean your base colour plus increasing amounts of white?

Any of you have a good priced lamp-magnifying glass combo? My eyes are fucking horrible and I keep missing moldlines.

>>47406414
your stuff is always great. Makes me jealous.
>>47406060
>>47405966
I like the wolves, but the metalics on all the models look thick
>>47406131
looks great for a first model, especially the face. White seems a little chalky and thick though.
>>47406537
what look are you going for that necron? Rust? Doesn't look quite right to me.

>>47408080
i posted some stuff here. you like it?

File: Hhhehhehe.jpg (804KB, 3264x2448px) Image search: [Google]

804KB, 3264x2448px

First figure from Warhammer Quest finished. Haven't even primed the rest, gonna be a long project.

>>47406060
THIN

File: one_fish_two_fish.jpg (96KB, 620x853px) Image search: [Google]

96KB, 620x853px

>>47408630

Why is he green and not blue?

>>47405611
Funny, I find their brush primer really fucking good, to the point where stripping it is hard.

>>47408667
The other one will be blue. Didn't want them both to be the same colour.

>>47408615
Looks fucking dirty, and not in a good way.

>>47408507
Yes its rust

Is Airbrushed paint supposed to be coming off so easily from contact while being painted on top of, or did my friend forget to prime these when he did them for me?

>>47408615
You got valid critique and were like 'it's intentional'

The washes were applied poorly and the whites look bad.

>>47405611

Do you clean your models before priming them?

>>47409317
bronzed flesh looks weird without wash, and loads of it.

>>47405196

You want to start off by learning how to make wire frames and making proportional bodies without any details. For sculpting details there's a million youtube videos and books available.

Little things like the chainmail can be made with actual fine mesh chainmail

>>47409394
It looks weird and shit now. Worse.

File: 20160523_193708.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

Built my weirdboss for my new snakebites.

>>47409549
The power of da waaagh turned my photo sideways.

Anyone else that gets covered in paint when using the GW pots? Just opening and closing a pot will cover my hands in paint.

File: file.png (834KB, 1332x1332px) Image search: [Google]

834KB, 1332x1332px

Okay WIP, please help me learn how to airbrush.

Tonight was the first time I held one of those things in my life, here's the results. Primer and base goat of gunmetal.

On some it was perfect and I love it.

>>47409394
Your Whites are terrible.
If they were people, they would be red necks, the worst kind of Whites.
Don't just slather a black wash on them. It's just not good.
I like the scheme though.

File: file.png (1MB, 1332x1332px) Image search: [Google]

1MB, 1332x1332px

>>47409741
But on many more here's what happened.

More often in the priming phase, but also with the normal paint, I had these huge blobs.

File: file.png (761KB, 1332x1332px) Image search: [Google]

761KB, 1332x1332px

>>47409766
Close up of what I mean.

Vallejo's guide did say to use 10-15 psi, and I noticed I was at 20.

Was I spraying too close? Too much? Are 5 Psi really so massive a difference?

>>47409291
Probably the latter. Though if they're clear coated, they still shouldn't be rubbing too badly.

>>47406338
I think they look fine as is, they have a coherent motion to them and I think the arm is a good fit

>>47406397
lookin really cool so far

>>47409802
5 PSI is the different between flat, perfect and bulging tires.
And we're talking 25, 30 and 35psi on a standard car.

>>47409835
Even just picking them up by the helmet for a brief second (crackle paint base was drying) had the blue starting to fade away to reveal grey plastic underneath.

I have a feeling he forgot to prime them and just wanted to get the blue on before he left for his trip. Guess it's time to strip them.

sup /wip/ has anyone used frogtape for masking before? I want to do some intricate masking on my upcoming project and the masking tape I'm using at the moment just won't cut it, it's good but only for doing straight lines really, I have trouble with it adhering to curved surfaces.

File: weathering.jpg (179KB, 1038x781px) Image search: [Google]

179KB, 1038x781px

Started weathering my Australian fleet for DW- I'm hoping to have these guys done by the Nova Open, but I've been working on them for years. I want them to look really well used, so I'm going pretty heavy on the rust. The lower left ship is a junker I've been using to test painting ideas, and I've circled the rust in light blue- does it look overdone? It's washed out a little in the photo. Circled in purple is my attempt at heat discoloration on the smokestack- comments? The areas circled in red I can't decide if they need more metallics.

>>47409944
Painter's tape is OK, but Tamiya's is the best I've used - well worth the premium. Amazon if you can't get it locally.

>>47409944
You can use poster putty / blu tack for coverage on uneven surfaces, or try the paint-on masks.

File: train-car-implosion.gif (4MB, 480x360px) Image search: [Google]

4MB, 480x360px

>>47409802
>Are 5 Psi really so massive a difference?

Earth's standard atmosphere is around 14.7 psi. Pic related is what 14.7 psi can do.

>>47409802
Could be a few things:
1. Pressure (as mentioned). 20 psi isn't nesssesarily bad, but the rule of thumb is lower pressure and multiple passes.
2. Paint viscosity. I have a hunch this might be part of the problem; if your paint/pressure ratio's wrong, the atomized paint starts to dry mid air. Bad.
3. Distance. Off the cuff, you want to be 6-8" away from target; too close and you can spider, too far and you can orange peel. It totally depends on how light your touch is, though.

Speaking of which; what's your brush/compressor set up?

>>47409911
>>47410212
Point taken, thank you.

>>47410232
I'm using a CRPlus Evolution with the 0.4 nozzle, and a Sparmax TC-610h.

Paint was unthinned, but the vallejo metal color line is supposed to be ready as-is. Next time I'll try diluting it a little.

>>47409394
Look, there's no point you asking for critique because you can't actually take it, nothing is a big deal or your fault.
Unless you can be receptive, don't post your shit.

Post a model where you've actually cleaned the mold lines and where you can't see brushstrokes and pooling in the wash.
Consistently paint the eyes on your marines, you just left some undone.
Do any basing. Just sloppily painting the base brown looks shit, I fucking mourn for that Imperial Space Marine.

>uh it's weathering

No it's a shitty washjob, look up a decent weathering tutorial if you want them to be muddy.

If you can't get the desired look with dwarf flesh, try another paint.
Zandri Dust -> Ushabti Bone -> Screaming Skull instead, for your creamy whites.?
You'll still want to wash it brown, but again, wash it, don't drown it.

File: Shit Invader.png (3MB, 1560x1634px) Image search: [Google]

3MB, 1560x1634px

Helppppp! I'm trying to make this guy look like an invader from dark souls, but it's going to shit, any advice?

I painted him black, did the red bits by thinning my red paint further and further to try and blend it, but it came out like dogshit. I tired riekland fleshshade to shade it since I know it's redish, and that didnt help anything, so I tried highlighting with more red, and it still looks like a turd. Then to save that I tried nuln oil, and here we are. How can I get this to work? Essentially the red areas are supposed to be from a downward light as far as I can tell from reviewing source materials on invaders, but I cant get a solid clean blended red for whatever reason (probably me).

Forgive the pictures, turns out dark red on black is hard to take a picture of.

>>47410524
I think you've got the right idea, you just need to tune the execution a bit. Maybe a black undercoat and then a maroon base coat, then blend up to red-orange as a highlight.

>>47410524
Doing a black fade on top of red is going to be a lot easier than doing red on top of black.

Brush strokes in the direction of fade, rather than across it, can reduce the obvious lines at the boundaries if you let the strokes go into one another.

If it helps the red you have on the legs actually looks pretty cool.

>>47410033
I don't think you reached that point when rust ruins the model,just ask yourself if you like it like this, i do.

File: 20160523_173307.jpg (3MB, 4608x2592px) Image search: [Google]

3MB, 4608x2592px

Bloodspatter y/n?

>>47410619
Answer is always no imo,unless it's for a very precise reason or you are trying to do a trashy model it always looks pretty boring and childish. But i would add some of that bronze somewhere and or make boots brown.

I'm trying to paint up a large area of exposed muscle at the moment, i'm just wondering does anyone have any tips/experience with it?

>>47410033
Make the stairs metallic if you want, but on board real ships everything gets paint; exposed metal and water don't mix at all. If you want to pick them out in something, red or gray.

>>47410797
>>47410619
Fucked up the quote

File: 20160523_173512.jpg (4MB, 4608x2592px) Image search: [Google]

4MB, 4608x2592px

>>47410797
He's always carried games for me so I thought some on his saw would be appropriate.
Judge pic related, I think I'm ok with splatter

>>47410832
>>47410795
Fuck your sneaky ork

>>47410837
It's not about how it is done,it's just boring to me,but if it's just to honour the warboss,it's good i guess. Plus i think some red would look good on him.

>>47410808
It's more a matter of visual interest- I actually work on an old WWII warship, and it drives me a little crazy the way so many gamers feel the need to pick out every gun barrel in gunmetal. I just don't know if that's too much unbroken green in there.

File: orkred.jpg (111KB, 678x858px) Image search: [Google]

111KB, 678x858px

>>47410524

>You should have primed black.

>Then any areas that were going to be red have done a thin layer of dark brown over black

>then build up from brown to red in those areas

Your paint looks really thick, get it to a consistency of milk and apply a layer. It's going to look blotchy and ugly. LET IT DRY 100%

Apply a second milk thin layer, it'll still look blotchy. LET IT DRY 100%

repeat until red.

- this red on my Ork here (which I like to think is nice and flat) was achieved in the same way (but I wanted a full red instead of red to black highlight)

File: 20160523_175257.jpg (3MB, 4608x2592px) Image search: [Google]

3MB, 4608x2592px

>>47410899
How's this?
Any idea for base and helmet?

Anyone got experience sealing pastels/pigments? They don't look nice after sealing, slightly better when applying medium/varnish through an, but still not nearly as good as without sealing them.

Any tips?

>>47410837

If you intend to do splatter do not do as much as that on your Warboss, that looks like someone put some TNT in a cow next to the truck and let it explode rather than it hitting something.

If you HAVE to do splatter... then less is more.

>>47411198
>implying that blowing up a grox isn't something that the orks would find hilarious

Where can I find miniatures of children? I'm converting rattling snipers.

>>47411323
Warlord Games has a few hitler youth soldiers in their line

great escape games has a hitler youth anti tank squad too.

Maybe you can use these as a base for conversion

>>47411157
>>47410837
Nice blood! any specific tutorials you would recommend for that look?

File: 200PCS-LOT-Column-head-plastic-oil-font-b-brush-b-font-Paint-font-b-brush-b.jpg (52KB, 853x640px) Image search: [Google]

52KB, 853x640px

>>47411404
>buy plastic brushes like pic related from dollar store
>buy blood for the blood god
>dip half of the brush with blood
>flick onto surface with finger
>?
>Profit!

>>47411451
Shit. You wouldn't think that something that simple would make something look that good. Well cheers thanks for the (you).

>>47411157
that is some of the coolest blood effects I've ever seen. That model is legitimately intimidating.

File: CjLC6T4WUAEKHn7.jpg (47KB, 600x449px) Image search: [Google]

47KB, 600x449px

First time painting, did I do good?

>>47411876

Try getting closer to your models

>space smurfs

>>47411876
I like your robin mug

File: CjJ2FIHWYAAJw9i.jpg (69KB, 600x449px) Image search: [Google]

69KB, 600x449px

>>47411950
I only did smurfs as practise, I'm painting these into Charcharodons

>>47411643
Last time, this gave me Storm Wardens. Working on them now but let's see what I get for a spare model

>>47411876
Great mug anon!!!

>>47411876
closer please

>>47411977
Thanks, it's rather comfy

>>47411981

Fair enough. Get closer pics and highlight more. Also, good mug, it's nice.

Base too please

>>47411998
:D

>>47411643
rolling

>>47411995
Fire Hawks, you are a lucky one.

File: IMG_20160523_234411.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>47412039
>>47411998

>>47411643

Pls

>>47411323
HF have some children and a line of sci-fi dwarves.
Reaper also has a few kids.

I'd look into using hobbits or something like that though. Unless you want to build kids that count as ratlings and not just convert your own ratlings.

File: IMG_20160523_234356.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>47412039
>>47412001

File: IMG_20160523_234334.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>47412039
>>47412001
I'm glad people like the mug

>>47412167
how do YOU think you did.

Look at them as if someone else painted them, what would you say?

>>47412100

Closer, more light, greater focus on the camera

Your gold lacks neatness and elegance, and your arms look a little odd, kind of exposed.

At some points seems like your primer is visible, more layers needed

Highlight the armour and gold, it looks kinda flat

Can't see the backpack, but it looks as though you have missed out metallic details

>>47412126
Looks neater, the eyes are nice, although you have smudged. Needs highlighting all over

Please buy a fine detail brush and some basing materials.

I would say you have a fair bit of potential, but you need to stop being so lazy. There is evidence here of steady brushwork that is sadly ruined by carelessness.

>>47412206
I think I'm on the right track but I need improvement.

>>47412231
Cheers, I'll put these tips to good use.

>>47412100
>>47412126

Looks like you need a smaller brush or better brush control. Prop your wrist against the table if you have trouble with shaking. Also, don't be afraid to go back and clean up areas that you've spilled paint onto places you don't want, like the shoulder pads and around the eyes.

>>47412289
Yeah brush control is one of my main issues. Cheers man.

>>47411643
Let's see what I get

Anyone here with experience in sculpting? I'm looking to try my hand at making a few Scandinavian warriors (vendel period). Anyone got any techniques for doing chainmail good? This is my first time.

>>47411176
I've heard hairspray can work

File: IMG_0534.jpg (910KB, 2016x1512px) Image search: [Google]

910KB, 2016x1512px

6 months later and I finally finished assembling my BaC box
Painted squad is ~90% done, need to do finish eyes, highlights, clean up, and transfers
Ended up going with Forgeworld's BaC Alpha Legion scheme as I wanted something turqouise, wasn't fond of the metallic blue look

>>47413155
>that right handed bolter

Where is it from, brother? I'm in dire need of one.

>>47413155
The hell is that guy on the far right doing ?

>>47413427
Its a cut-up bolter + handle from a power sword or knife I can't remember which.
I found one in my bits box with a bird head pommel and used it.
Worked out perfectly with a little greenstuff

>>47411360
Awesome, thanks.

>>47412120
I'll check them out, thanks.

And, no, I've had a Guard army on the back burner forever and wanted to make them look grizzled and desperate. Was going to attach an allied Alpha Legion squad or two pulling the strings.

>>47413663
He is going to have sniper rifle in his hand, I am not attaching it until it is painted.
my low budget placeholder for Exodus until I have the time to hunt down/purchase better bits,

>>47406131
thank you for actually trying, instead of posting "hurr here my first model [blurry mess of shitty paint that gets posted upside down 4 times because of phones or something]"

this looks good/okay, definitely good for a first model

how do I apply wash to space marines

do I just paint it all over the armour or dip it in or something?

>>47413930
paint it into the recesses on the model

>>47413930
Never ever ever ever EVER dunk your model in wash. That would be silly. Here, have a helpful guide to painting your tin men.

https://www.youtube.com/watch?v=g9HzqHVg1uE

>>47411643
Rollan

>>47411157
blood looks good, but the rest of the model could use some cleanup like his boot, parts of the gun, and around the skull. I still like it though, very aggressive.
>>47412167
Much better than my first time stuff, though you've made some of the same mistakes I did at first too. First of all focus on getting good clean layers on each part. For instance don't let any black or silver to show up on the blues, unless it's nuln oil in the crevasses. Keep the colors seperated and the layers solid. These guy's guides really helped me when I was new you should check them out. Here's the one for ultramarines.

https://www.youtube.com/watch?v=1FQuqr3gW10

>>47413155
need close ups

File: doppleganger.jpg (107KB, 429x501px) Image search: [Google]

107KB, 429x501px

just started working on my doppleganger, I think it's coming along ok. Still unsure how to do exposed muscle though

File: WIP Skull Mountain 07 - 50pct.jpg (766KB, 1420x6342px) Image search: [Google]

766KB, 1420x6342px

>>47406397
>>47409896
>lookin really cool so far

Thank you! I am have a *lot* of fun making this piece!

Here are some current progress shots.

I've added some fortification wall segments along the top where cover was more sparse.

I also added mount points on either side of these walls for 2 Havoc Launchers.

I added a storm bolter at the back door entrance,

Cut out 3 control pad/panels from a wall piece. 2 were cut right down and added to the pillars that supported the Havoc Launchers. The idea here is that the HLs are controlled by these pads! The larger panel was attached to a rock with pipes added going into the ground. The idea here is that is can remotely unlock the bottom door, as well as control the storm bolter there.

I added some smoke launchers into the rock face.

I made a portable escape hatch exit point complete with above ground sensors and smoke launchers to obscure ones exit.

>>47414281
paint one muscle strand at a time and continually highlight up the centre of each strand.

How is Lahmian Medium as a thinner? Should I grab a pot or should I try to find some Vallejo Air thinner at my LGS first?

File: shingeki-no-kyojin-hd-wallpaper.jpg (588KB, 1920x1200px) Image search: [Google]

588KB, 1920x1200px

>>47414281
>Still unsure how to do exposed muscle though
>>47414333
>paint one muscle strand at a time and continually highlight up the centre of each strand.

Try injuring yourself - say, biting your hand - when your mind is focused on a clear, simple goal.

>>47415191
Did they ever explain what those fucking things were or what was in the basement?

>>47414293
that's doin' terrain right, it's like stumbling upon an outpost in fallout, it's got it's own narrative going on

File: attack_on_titan_giant.jpg (811KB, 1600x1919px) Image search: [Google]

811KB, 1600x1919px

>>47415353
>Did they ever explain what those fucking things were or what was in the basement?

Picture to keep this WIP-relevant and help answer >>47414281's questions.

Been paying attention to the subterfuge and "who's the *real* enemy" talk in the anime?

The royal family, to which Christa Lenz (her real name is Historia Reiss - she's the *real* king's illegitimate daughter) belongs, has been pulling the strings since before the three walls were built. Someone of royal blood can, with the correct titan-shifting ability, alter human memory en masse. They do this to control Humanity at large and stay in power. And who would want to go outside the walls? Hell, there are titans out there!

Eren's father figured this out and stole the power, then changed Eren into a titan-shifter. Eren then ate his father (which is why he is missing for the entire series), inheriting this ability. Eren is not of royal blood, so his use of his abilities are limited, but it is important that he, and not the royal family, have them.

If you've watched the entire anime, you know that Annie is the female titan. Ever notice that even in background shots, she is often seen in the company of Reiner and Bertoldt? That's because they are also titan-shifters (the Armoured and Colossal titans, respectively). If you read ahead in the manga, they confess to Eren almost immediately after the end of the TV show's run. They also kidnap him.

I've read all the way through episode 72 of the manga, and have yet to find out what's in Eren's basement, but Historia becomes the rightful queen after the military stages a coup.

>>47406338
I think the head looks fine if you paint the emboss gold like the symbol of Khorne, however the arm looks a little thin, maybe try putting a shoulder pad on to balance the model out.

Otherwise I love these, I remember the one you posted a week ago, very nooice.

>>47415900
Model looks cool.

And there is still only one season, right?

File: kabane.jpg (139KB, 1920x1080px) Image search: [Google]

139KB, 1920x1080px

>>47415964
>And there is still only one season, right?

Yes. You can read ahead in the manga, though - there's at least another season's worth in there - plus there are two live-action movies where the details are quite a bit ... *different*.

The same ladz wut wuz involved in Attack on Titan are currently releasing Kabaneri of the Iron Fortress (pic related) both in Japan and the US simultaneously. It's a cross between AoT and the Walking Dead, but with trains! Not sure if Kabaneri will delay or derail (Hah! Train pun!) a possible second season of Attack on Titan.

>New technical paintts
>Three of them for putting on metallics to make gemstones
Neat.

>Looking over crackle paint bases
>Four of them crackled properly
>Fifth one has a big fat blob that hasn't cracked yet

That's odd, I put the same amount on all 5. Should I try running them under a hair dryer or just wait?

File: 20160522_223631.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

Testing out some color schemes I want for a future army tbd. Also, fun with blending!

>>47414689
Its ok. I've tried both but have since given up and reverted back to water. I find Vallejo makes my paints gum up

>>47416592
Hm, I'm having poor luck with water. Either I need to get a dropper and I'm putting way too much, or my town's tap water is worse than I thought.

File: teleporter.jpg (182KB, 1366x768px) Image search: [Google]

182KB, 1366x768px

Painted my teleporter homer for my interceptors. Gotta keep putting off that dreadknight...

File: white.png (2MB, 1304x1408px) Image search: [Google]

2MB, 1304x1408px

>>47406323
ill just butt in here and post the objectively better, easier, and requires-less-paint edition.

>>47416818
>that photoshop

File: punisherFO.png (701KB, 450x800px) Image search: [Google]

701KB, 450x800px

Is a X-wing repaint fine too?

Just about done with it, need to clean up the wings and do highlights

File: curr3.jpg (230KB, 1742x804px) Image search: [Google]

230KB, 1742x804px

Dark Angel and Death Guard are just about done (other than basing)

my counts-as Vindicare needs a big cleanup, and highlights.

r8 m8's.

>>47417292
he's going to have to take the plug out of his plasma gun before firing

>>47417292
The Infinity model makes the GW ones look terrible, all are very nicely painted though.

>>47411643
Don't have marines but I wanna see.

>>47416986
What is shopped?

>>47417698
look closer at the space marine's bolter on the top image

>>47417710
I'm... I'm not seeing it.

I don't have my glasses, can you explain?

File: Untitled-1.jpg (62KB, 560x193px) Image search: [Google]

62KB, 560x193px

>>47417728
they instead took another picture at a slightly different angle, threw the pic in photoshop and messed with the picture's levels

>>47417710
>>47417767
That's more a problem of all GW's painting guides. They are never properly white balanced, which is why the colors and lightness can look randomly different in something that is supposed to be a step by step tutorial.
If you squint you can see the line highlight on the right side of the pic you just posted. You can't see it on the left.

Now this is more likely due to shitty photo editing than not painting what's in the tutorial.

>>47417767
No? You can see where they highlighted with white scar in the second image.

>>47417292
that deathguard is awesome. Especially the melted face, sword, and the scratches/holes in the armour.

>>47417515
Yeah Corvus Belli has been putting out better Infantry models than GW/FW for the past year or two.

>>47417292
Deathguard looks good. Not a fan of the fat highlights on the dark angel though.

>>47409549
Looks like he's into autoerotic asphyxiation.

File: 20160523_233947.jpg (297KB, 1223x1067px) Image search: [Google]

297KB, 1223x1067px

I cant paint white for shit. I think Ill make the tabards very dark grey with gold trim, like how they are on the phoenix termies

>>47410795
Could look alright.

Whatever you do though, do NOT do the flicking red at the model thing. Always looks shitty.

Be a bit thoughtful about where the blood on a spinning saw would land and pool. Then have it run down flrom there and drip away.
The outside area should look a little brown and crusty with the center looking red and fresh.

File: IMG_20160524_183850.jpg (827KB, 1702x1788px) Image search: [Google]

827KB, 1702x1788px

Tonights menu is the same as the previous two.

Cream of Necron soup with a reduction of WAAAGH broth.

>>47418660
he already did it here >>47411157

>>47411451
I use that same type of plastic brush when I'm gluing magnets to models (because not metal and still good to push the magnet in) and to spread flock around when basing. Good, cheap, trash brushes.

File: thing.jpg (63KB, 1280x960px) Image search: [Google]

63KB, 1280x960px

Can anyone identify what this thing is? I bought it on ebay from a seller that sells 40k stuff almost exclusively, and it was titled "Ork Device Objective Marker."

I bought it with the intent of using it as a stand-in for a Void Shield Generator (and still will in casual games with my friends), but I'm starting to doubt if this thing is even from Games Workshop. It's plastic and on a 1999 50mm GW base, but that's not very telling.

>>47419481
it's made up of parts from a chemical plant terrain set

not GW, I can't remember the company name right now

File: maxresdefault[1].jpg (119KB, 1280x720px) Image search: [Google]

119KB, 1280x720px

>>47419506
>chemical plant terrain
Say no more.

Thanks, broseph. Funny enough, I know my Pegasus terrain sets, but I guess this specific design made it slip right over my mind.

>>47419521
I can't say I'm a fan of the style, only remember it because of the banding on the pipes.

>>47419540
Yeah, Pegasus can be pretty hit or miss. The only reason I'm familiar with them is because I had bought their old (the square not hex) platformer set for a diorama I was making a year or two ago.

>>47415900
and I thought the story couldn't get any dumber

>>47414135

"dont dunk your model in wash" Duncan dunks the model in wash

>>47416313

just wait, it will crack. The big blob will probably look the best in the end.

>>47411643
I play infinity, but how do I paint my Military Orders.

>>47405566

Advice on unpainting?

I got the "Battle of Maccrage" starter kit from my local library for $5, all the pieces are there, but half the space marines are put together (not glued) and have a terrible paint job on them, I want to find a way to undo their paint job so I can paint them to join my army.

>>47420314
get some super clean from walmart if you are in the US. Also why did your local library have warhammers?

>>47420314
99% isopropyl rubbing alcohol, that stuff strips so well that a cotton swab with some on it will remove paint if you rub it. soaking also has no effect on plastic or forge world resin, I tried for 2 straight days and nothing happened to the plastic, but the paint seems to dissolve

>>47420348

Someone donated them to the library, so they sold them in their little shop they have at the front of the library.
Also got a impereal guard chimera, box was opened, but was untouched, for $2

So, I'm new to painting, can I just use a cheap acrylic paint from a hobby supply store? Or is there a real difference in quality of higher cost paints?

>>47406537
>finished
>cant paint within the lines

File: 1464089119647-549142091.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

>>47420314
This is me>>47419397

Using dettol disinfectant at the moment. It's fantastic stuff the paint just slughs off after a few hours soaking.

>>47416796
wash? wash.

>>47420365

Nonononono. forge world resin is destroyed by alcohol. Dont listen to this heretic.

>>47420774
i left it soaking for 48+ hours with zero problems, but if you say otherwise, so be it

File: blackmask.jpg (671KB, 2522x1248px) Image search: [Google]

671KB, 2522x1248px

Just finished painting up the core of my Black Mask crew for BMG. Black Mask himself was fun to paint, the black and white are basically the same 4 paints.

>>47420774
>>47420805


As always test a sprue piece of your material for a few days first.

Resin is a broad term.

>>47420887
>>47420887
>>47420805

yes.
I put a few pieces of an alpha legion contemptor in alcohol overnight. It turned into hard jello, i could dig into it with my nail and the details are gone. Be careful

>>47416796
>>47420727
Just like your grey knights. Looks like shit.

>>47416796

You really need to highlight and wash. Yes, your base-coats are neat and smooth, but just a base-coat is boring!

>>47420502
Googling will get a more complete answer,but basically it doesn't thin well enough,but it's ok for bases

>>47421183
I mean painting bases,not basecoating

>>47421265
What are we looking at?

>>47421302
A Boss Nob for Kill Team I just primed.

>>47419481
You realise that a VSG is massive, right? At least try and get a similar footprint.

>>47421265
>Loot a space marine pauldron
>Put ork armour over the top of it
I approve.

Please fill in the slottabase though.

File: gold highlight.png (487KB, 600x620px) Image search: [Google]

487KB, 600x620px

>>47420727
>>47421124
I'll try. I honestly don't like the overly highlighted look though, but I think I could use some highlights and washes in a few spots better.

Some questions:
What's a good highlight for mephiston red? I'm currently using evil sun scarlet and bloodletter glaze, but as the comments have said it doesn't seem to show up well enough. Also what is the last highlight in pic related for the gold on the sword? Is it just scar white? or something else?

>>47421051
I never claimed to be a good painter.

>>47421051
Christ mate atleast he's posting and having fun and not being a total ass.

>>47421506
I've always just used Evil Sunz and got a fairly nice result without being garish. How are you applying the glaze?
It might also be worth looking at an extreme highlight with a very slightly brighter orange.

>>47421506
>I'm currently using evil sun scarlet and bloodletter glaze, but as the comments have said it doesn't seem to show up well enough.
Try using orange or mix in some yellow.
>Also what is the last highlight in pic related for the gold on the sword? Is it just scar white? or something else?
Usually GW's brightest silver. Used to be mithril silver when these dudes were released. Use the current equivalent.

File: 2016-05-24 06.23.45.jpg (1MB, 3096x4128px) Image search: [Google]

1MB, 3096x4128px

Seeking pose feedback again, got some primer b/c my vision is shit and I can;t see details on the beige and took better pictures.

I tried to get the head facing left

>>47402352
>>47404534
>>47404660

File: 2016-05-24 06.23.56.jpg (1MB, 3096x4128px) Image search: [Google]

1MB, 3096x4128px

>>47421663

>>47421605
well part of the problem is my highlights get masked by the bright overhead lamp I turn on to take pictures. I usually apply the glaze 2 parts glaze 1 part medium. It doesn't seem to do much though. Maybe I'll try another coat or get some orange to mix in with the scarlet.
>>47421617
thanks for the answer

>>47408630
Instead of dropping Dr Seuss memes I'll say it's looks fucking awesome

>>47421663
It looks nice and natural

>>47421663
looks ok, I think it'd look better with him stepping down off the rock (right foot on the ground) or stepping up onto it. But i dont know if the joints bend on that model and it could look weird if the rock is too tall

File: johnny_citadel_reds.jpg (273KB, 1280x436px) Image search: [Google]

273KB, 1280x436px

>>47421506
>What's a good highlight for mephiston red? I'm currently using evil sun scarlet and bloodletter glaze, but as the comments have said it doesn't seem to show up well enough.

That's funny... you'd think of all people that a Blood Angels player would know the answer to this, but then again, I actually *start* with Evil Sunz scarlet and go up from there. I prefer the bright 2nd Edition Blood Angels red to the grimmer darkness of the more recent stuff.

How about Wild Rider Red or even going up to Troll Slayer Orange?

>>47421734
Was trying to make it look like it was touching down softly on it.

>>47421717

Just concerned with it since it'll be the centerpiece for my kill team and I want it to look nice.

>>47421771
>Was trying to make it look like it was touching down softly on it.
That's the impression I got from it myself. It was like the guy's coming down to the ground and is about to bring the guns around to shoot in the direction he's looking.

Honestly I wouldn't worry too much about it. Anything that isn't a horrible pose isn't going to affect what people think of it on a tabletop level.

>>47421756
Yeah I might try some orange or a mix of orange and evil sun scarlet as a tertiary highlight. Thanks blood angels guy.

File: IMG_20140617_082318.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

Hi WIP, I'm sculpting my first model from scratch - have only done conversions up to this point. How do you all secure your armatures while sculpting on them?
Picture is basically the last thing I did any sculpting on (2014)

>>47417292
Very well done on the Death Guard, truly a fantastic miniature.

The scar work in particular is just superb. Make more and post them!

File: Khornate ''Biker'' #1 Finished.jpg (538KB, 1459x1515px) Image search: [Google]

538KB, 1459x1515px

1 down almost, the base need a second coat of glue and some paint and some 15 to go. My poor ass is hurting even when I'm not painting. Should probably take a small break form all this... :)

File: thumb__MG_0087_1024.jpg (180KB, 1086x724px) Image search: [Google]

180KB, 1086x724px

I'm currently assembling a ton of high elves sitting in my shelves... there's still a lot of work...

>>47422297
>"For the love of the gods, Elaethan, start using deodorant!"

>>47422250
It looks great anon

>>47410837

>not streaks and half a marine stuck under the grille

>>47422250
Very Nice.

what's your gold recipe?
what's your red recipe?

>>47412100

I don't think he can see

>>47413155

>BaC bought on release
>mine's still in the shrinkwrap

Fuck

File: sr_OriginalSpeed_2.jpg (49KB, 640x1138px) Image search: [Google]

49KB, 640x1138px

>>47421663
Sort of reminds me of the Speed Racer pose with the arms in a different position.

>>47422648
>what's your gold recipe?
Auric Armour Gold painted on a red basecoat, highlighted with a Vallejo equivalent of Runefang Steel and a layer of Seraphim Sepia.
>what's your red recipe?
The Jugger has a basecoat of Mephiston Red on gray primer, Nuln Oil carefully applied into angels/cracks and highlighted with Evil Sunz Scarlet.
The Rider done pretty much the same but with a Evil Sunz Scarlet basecoat and Wild Rider Red highlights. Basecoats were done with an airbrush.

The whole painting process was/is VERY simple, only thing it really requires is decent brush control

>>47422250
really nice colours

File: 98_4.jpg5260d0a48d190.jpg (26KB, 400x455px) Image search: [Google]

26KB, 400x455px

anyone know off the top of their head where I can find one (or eight) of these Robogear T-Rexes? Ebay and Amazon have failed and I can't seem to find them anywhere else.

>>47421977
Block of wood is usually good. Large enough it will sit itself happily on the desk and not fall over.

>>47423404
Ali express maybe?

hi guys, am i the only one who can't access he build your own paint set page on reaper's website?

https://www.reapermini.com/BuildYourOwnPaintSet

How humid is too humid to prime?

>>47423548
404 for me

>>47423601
thank you, at least i know it's not my problem only

File: tumblr_ndi98ob6cy1tjretoo2_500.png (156KB, 469x470px) Image search: [Google]

156KB, 469x470px

I bought a lot of spess muhreens off of ebay and just got them today. They're used, but I found they're all assembled via hot glue gun. Some of it is easy to clean off but most of it won't come off. I read isopropyl alcohol will help remove the glue. Should I dunk the marines in the alcohol and then clean them off?

>>47411643
Dusk Raiders are pre-Mortarion Death Guard, why are they here?

I'm converting the Morghast Archai/Harbingers into a couple of Nurgle daemon princes. While I will be sculpting flesh and icky stuff to cover some of the bones/skulls so they not so blatantly undead things, I'm not confident in my ability to sculpt a head from scratch. So I'm looking for any good heads, from any range, that might be a good fit.

Suggestions? Or even just favorite third party bits shops?

>>47406131
nice scheme, what color did you prime it?

>>47417199
as long as it's a mini, it belongs in the thread, but I've never seen an x-wing look like that.

I cannot come up with a color scheme for my Mawkrusha. Not feeling green, red or white per the pictures. As a fan of monster hunter I was thinking about making it look like a Tigrex. But I don't want to come up with a boring brown dragon or screw up some sort of pattern on the scales. Any ideas?

>>47417292
Sam Fisher/10. In a good way. Well done.

>>47424266
it feels either alpha legion colours or blue and violet, but i understand one is a pretty boring combination and the other is a bit extreme

>>47418560

Start off with a broken white like zhandri dust, then bone, then white highlights

File: saint_duncan.jpg (218KB, 1000x664px) Image search: [Google]

218KB, 1000x664px

>>47420032
>"dont dunk your model in wash" Duncan dunks the model in wash

Dunkin' Duncan?

>>47423563
If you're in the Upper Midwest, yeah, it's way too humid.

>>47423563
if humidity is an issue, wait until around dusk.

>>47423563
you want 50% or less.

File: 20160524_032432.jpg (5MB, 5312x2988px) Image search: [Google]

5MB, 5312x2988px

Heres my hawkshroud knight so far. How am I doing? Im also looking to try a stripe pattern on the chainsword, what's the best way to go about it?

>>47425943
Less Imperial and more Ork id say

>>47425943
Looks good, although the yellow looks pretty thick in places. For the stripes, masking tape is crucial.

File: xcvb.jpg (70KB, 1282x682px) Image search: [Google]

70KB, 1282x682px

Hi anons. What's the thing that sticks to the miniature's feet and the thing under it called?

>>47426064
I don't know what brands you have in your country but usually it's a type of crafting/poster tac and the thing it's stuck to might be a soda lid or an empty paint pot.

>>47426064
blu-tac

File: dark angels fallen chaplain stalker.jpg (764KB, 1447x1339px) Image search: [Google]

764KB, 1447x1339px

>>47405566
Fallen DarkAngel
>https://www.youtube.com/watch?v=WVOfpLi6RsE&index=65&list=PLy55WVLwDMPlyr7qFDehv8aCI9wnuDvZd

>>47426114
>>47426153

Thanks, now i gotta figure out what's it called here and where it's sold

File: primarch primarchs nurgle death guard 30k horus heresy hh .jpg (277KB, 729x635px) Image search: [Google]

277KB, 729x635px

>>47426231
Also a Primarch sized model for 30k i finished recently.
>https://www.youtube.com/watch?v=X8R9ZDBVl1g&list=PLy55WVLwDMPlyr7qFDehv8aCI9wnuDvZd&index=62

>>47426001
I did my best, but the yellow IS really thick in places. It looked beautiful with base paint colors but I had a hell of a time getting smooth even color with my layers. Yeah I wasn't sure what tape. Masking, then thanks.

>>47425955
Stripe pattern you mean?

Hey, this is a question for the anon making the Fist Cataphractii if you're still around; where'd you get the shield from? Did you just have some of the FW boarding kit or what?

>>47426249
>>47426231
Oh hey, green stuff boobies guy is back, and reposting as well.

File: 090909.jpg (86KB, 867x960px) Image search: [Google]

86KB, 867x960px

finished painting my toshiro

File: WIP Skull Mountain 08 - 50pct.jpg (377KB, 1440x2140px) Image search: [Google]

377KB, 1440x2140px

>>47414293
>>47415414
>it's like stumbling upon an outpost in fallout, it's got it's own narrative going on

That is exactly the sort of vibe I was going for, so well received!

I have just finished sanding this beast and am having so much fun! Every little bit adds a bit more character to the piece.

Now to base coat it and start painting!

File: image.jpg (757KB, 1767x2991px) Image search: [Google]

757KB, 1767x2991px

Too many awkward areas.

>>47427009

That's a neat-looking Imagifer, but ... why is she all shiny? Is she coated with Vaseline?

File: 13262549_1223474541016819_804064225_o.jpg (284KB, 2048x1536px) Image search: [Google]

284KB, 2048x1536px

Ello gitz 'n grotz.
da big mek just finished his latest kustomizations.
whatcha fink?

>>47427214
Varnish to prevent chipping

>>47427262

Paintjob aside, the ork on the right's arms aren't even connected to his body.

>>47427295
oh fuck. thanks for pointing it out. fucking superglue is a shit.

>>47427319
aaand it won't come off. guess i'm waiting for my order of greenstuff to arrive.

File: 13281836_1223480567682883_527136946_n.jpg (93KB, 720x960px) Image search: [Google]

93KB, 720x960px

>>47427339
armz fixed

>>47425943
whoh.

>>47427380
thin your yellows.

>>47427572
Whatd I do?

>>47405566
is the painting guides/visions etc. link down for anyone else?

File: blue-man-group-1-67fe5b8b3e3608da.jpg (201KB, 2048x1092px) Image search: [Google]

201KB, 2048x1092px

>>47420836
Are you sure you didn't cross the Blue Man Group with the Payday crew?

File: image.jpg (174KB, 640x1136px) Image search: [Google]

174KB, 640x1136px

>>47411643
Dark Angels for Life

>>47427733
how you hid the image. cought me off guard.

>>47428414
Real talk, I have no idea why it did that.

File: Lamenter.jpg (607KB, 1602x1742px) Image search: [Google]

607KB, 1602x1742px

>>47428463
did you do that?
pic unrelated.

>>47426235
It's typically used for hanging posters if that helps.

>>47428576
Nope, I've never seen 4chan do it either. I'm posting from my phone but this is the first I've seen it.

File: 20160524_155321.jpg (279KB, 1627x921px) Image search: [Google]

279KB, 1627x921px

Hopefully ONE of these will turn out decent

>>47426935
what were you using between the bark, some sort of clay or plaster or wha

File: file.png (958KB, 800x1080px) Image search: [Google]

958KB, 800x1080px

>>47425943
you want Tamiya masking tape, it's the best stuff for modelling and is the perfect width for stripes

just run it along the sword at the same angle on regular intervals and paint

File: Das Clay Ya.jpg (64KB, 1024x589px) Image search: [Google]

64KB, 1024x589px

>>47428776
I used dis Das stuff.
Air drying clay.

I've used wall plaster putty before, but I found it too moist and sloppy to work with. Plus, it's wet nature greatly increased it's drying time and also caused cracks in the plaster itself and warping of MDF board below it as it contracted during it's drying process.

This Das stuff was easy and fun to work with.
I used a small spare piece of bark to press impressions into wall areas inbetween bark to give it a more "natural" texture.
It blends in nicely once painted.

>>47428932
It was like 5 or so $s at Michaels for the KG. I used the entire block on Skull Mountain.

>>47428918
Oh hell yeah I'm getting this

>>47428945
That's a damn reasonable price for the volume, considering hobby prices in general. Yeah plaster has been a nightmare to work with so anything to avoid it. One more thing for the "to buy" list.

>>47428297
Noice freehand

>>47416818
Don't trust that space marine painting guide, it lies. Look at the shades they supposedly get from using Averland Sunset and Yriel Yellow, it doesn't come out like that at all.

t. Previously frustrated Imperial Fist painter.

Necron compound = leadbelcher or runefang steel?

>>47429278
slightly lighter leadbelcher.

File: 20160524_194353.jpg (3MB, 4608x2592px) Image search: [Google]

3MB, 4608x2592px

I got another jet, gonna make a dakkajet and gonna run them together like a squad.
Should I paint it the same or differently? The new one will be the flyboss. Any customization tips? Really only 1 way to build 3 Supa shoota dakkajets sadly...

>>47429330
>slightly lighter leadbelcher.

Ironbreaker

>>47429360
That is a bit light, and monotone. Not very orky. were'z da red? Were'z da lukee blue? Da flashy yellow, and da morky checkerz?

>>47429427
Its my first one, I haven't built the second one. Went for a rusted crap look.
Wont it look weird if I have 2 different colour jets fly together?

>>47429427
peeled off at super sonic speeds

>>47429445
you should employ the salt and hairspray technique now that you have a nice rust layer down.
It easy and fun.
DO IT.

File: explain.jpg (6KB, 86x124px) Image search: [Google]

6KB, 86x124px

>>47429460
>the salt and hairspray technique

File: image.jpg (1MB, 3264x2448px) Image search: [Google]

1MB, 3264x2448px

>>47429445


Going for the same look, anon. Don't have a better or recent pic of it, but this is what I came up with. I'm happy with it.

>>47429479
Spray dry rust painted area with hair spray.
Apply chunky kosher salt to areas you want to later be exposed. Apply clumps here and there, and especially areas where you expect to experience high amounts of wear and tear.
Now, spray with the paint colour you want (ie, red).
Let dry.
Using warm water and a brush or tooth pick, scrape and scrub the areas that have salt under the paint in order to dissolve the salt below exposing the rusty under layer.
Highlight around chipped worn paint areas and then do a protective clear coat over the entire piece to protect it.
I can share pictures of doing my rusty exhaust vent terrain if you feel that would help.

>>47429535
Here is an older imgur album I made showing the hairspray salt procedure.

>>47429571
D'oh

http://imgur.com/a/NOZWR

>>47426935
Loving it, I wish I had the time to build terrain

File: IMG_20160525_020457_edit.jpg (121KB, 1000x680px) Image search: [Google]

121KB, 1000x680px

so much resin /tg, but i started with the powerfist, mainly because it had the most cleaning/filling to do and it's just a cool weapon

File: Neo-Berzerker #5.jpg (272KB, 913x1801px) Image search: [Google]

272KB, 913x1801px

Pain has now spread from my ass to my back. Why can't I stop? Send help!

>>47429910
>from my ass to my back
>Why can't I stop?
Khorne cares not from whence the blood flows.

Looking good.

File: 20160524_205833.jpg (4MB, 4608x2592px) Image search: [Google]

4MB, 4608x2592px

>>47429583
I absolutely love it, but I can't work with spray paint due to medical reasons. I already ask my roommate to prime and it annoys him...
I think it my jet looks fine, but I'm gonna add some form of "boss markings" to my new jet. Not sure what yet.

File: CAF_P-51D-Red-Nose_-John-Willhoff.jpg (192KB, 800x533px) Image search: [Google]

192KB, 800x533px

>>47430345
Invasion stripes might be a good idea. Checks and dags are similarly perfect for any ork vehicle.

Nose or tail markings would also work. Just look at real-life planes for inspiration.

File: Apoteos_mutants04.jpg (299KB, 1920x1200px) Image search: [Google]

299KB, 1920x1200px

Can anyone give me advice on how to make similar bases? I'm not very sure what materials have been used.

>>47430521
Flock, gras tufts and ferns. You can get them in plastic, etched from brass or lasered from paper.
I'd recommend getting the plastic variety since I assume they'll be the most resilient to frequent handling, as you would expect with gaming pieces.

Were do you find all that?
Just check any model railway shop. They have loads of plants, flowers, trees, bushes and weather effects.

>>47430675
Thanks a lot anon. Do you think the bases pictured have been washed at all or straight from the packet?

>>47430752
I'm gonna go out and a limb and say he probably had a green base on parts of those bases, you can see some on the rock on the front right base.
The rest looks like a blend of different grades of gras and flock though. The Ferns look like they have been painted though.

The guy who did those posts here sometimes too. Maybe you'll get lucky and can ask him how he did them.

>>47430345
You could try spraying the hairspray into a cup and painting it on, ive seen that online.
Wear a mask and do it outside. Wear a bandanna over the mask.
You want a pretty thin layer of spray paint over the hair spray and salt too.
I don't know, I'd gladly do it for you if I could haha. I have asthma and chronic bronchitis but I just try to be careful.

>>47430345
>cant even use hairspray because of medical reasons

how do you even go outside? do you have to be in a bubble?

>>47430345
>I already ask my roommate to prime and it annoys him...
Have you considered an airbrush?

>>47431535
Blame cancer ruining my lungs
And I had it in the blood

>>47427274
Great, now use a matt varnish on top so she doesn't look like a latex doll carrying an inflatable stick

>>47426064
Blue tac
It's at Walmart by the yarn glitter and shit.

Rolled Storm Wardens on the chart a while back.

Decided I like the contrast of a regular blue next to a metallic silver, but I'm not 100% sure what blue to do. I'm thinking Macragge blue with a nuln oil wash will work nice, but not sure what blue to use for highlights... Kantor Blue maybe?

New thread
>>47432752
>>47432752
>>47432752