WIP/painting thread

File: 100_0844.jpg (464KB, 2048x1536px) Image search: [Google]

464KB, 2048x1536px

blurry picture time

I'm converting up a SAG big mek, where can I find a bendy tube to use for the snotling feeding pipe of the gun?

>>44334397
>blurry picture
Then don't fucking post it. Go take a new one instead

File: 20151222_224442.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

Here's my apprentice/journeyman Runesmith I would like to use for WFRP. Like a lot of my models, I think it can still use a lot of work so I consider it a work in progress. I can still use a better camera, though.

File: 100_0846.jpg (469KB, 2048x1536px) Image search: [Google]

469KB, 2048x1536px

>>44334509
By Imperial Command!

What are some good ways to make black armour pop? Going to be painting up some SM black but I'm worried about the base colour looking to bland.

>>44335344
Edge highlighting with a grey color

>>44335344
Basecoat leadbelcher then highlight with runefang steel then apply seven layers of nuln oil allowing each layer to dry before starting the next.

>>44335483
Are there any examples of this being done?

>>44335565
I don't have any pictures but a guy does it at my FLGS. The nuln oil makes the armor black enough but there's still a sheen to it, and it has natural highlights.
He does it with green for his grey knight swords and I saw him do it with blue for some Ultramarine commissions, it looks great.
It takes a few hours a model.

>>44334918
Dude, just drybrush.

>>44335344
just drybrush a dark grey, or some other colour if you want a different look.

Then highlight

done

>>44335763
That would have been a better idea yes.

File: 1931482_1739517269618125_4805093300039437423_n.jpg (66KB, 960x720px) Image search: [Google]

66KB, 960x720px

> Oh, don't put primer on Reaper Bones, it melts the plastic they use
FOR FUCKS SAKES. I ended up spending 8 fucking hours on this one guy today. And of course I ended up giving up before finishing the highlights, because fucking yellow takes too many fucking coats.

I regret absolutely everything with this decision to make my half-drow paladin wear yellow armour.

>>44336855
I've primed over the Bones figures before, no problems at all? What brand of primer were you using?

>>44337028
Literally any primer. I can't really check what I've got right now, but it's some generic primer bought from a crafting store.

I was just told by 5+ people at my FLGS that primer melts the Reaper Bones. What primers do you use that you know don't melt them?

>>44336855
I've never heard that before, I airbrush Vallejo primer onto Bones with no problem.

>>44337072
I use Rustoleum American Accents. Primes with no problems, no melting or anything.

>>44337126
>>44337090
I'll look into both of these in that case. And I'll probably also just use one of my spare bones zombies as a test dummy to see if the primer I'm already using works on them.

I don't want to spend 8 hours painting one guy ever again. That was just misery incarnate.

File: 20151222_215304-1 (722x1024).jpg (322KB, 722x1024px) Image search: [Google]

322KB, 722x1024px

Started painting one of the Blood Warriors I got from the Secret Santa(Thanks again Aussie-anon). The red is super thick I know, its been awhile since I've painted red and I totally forgot to undercoat it, so thats like 6-7 coats of red over black. Next model I'll def use the airbrush instead.

>>44337167
I know your pain, love Bones but painting them can be a pain in the ass. I'll wash the model with soap and water but theres always that one spot I missed that the paint wont stick to. So frustrating

Hey I want to build some chaos spawn, but want to do some serious conversions. Anyone know of some guides or cool images to help me decide how to build the little blights?

>>44336855

Don't bother with Bones figures. Get the metal versions instead.

>>44337613
>Don't bother with Bones figures. Get the metal versions instead.
Great advice, I'll go ahead and tell all of my clients to fuck themselves whenever they buy bones miniatures.

Also, I got these off my FLGS's rewards program. Free bones miniatures just for coming in and buying Monster Coffee to go with my 40k games is an offer I don't think I could not take.

File: IMG_20151222_223621591.jpg (2MB, 2340x4160px) Image search: [Google]

2MB, 2340x4160px

So this is my first model ever, my bro got me a box of termagaunts about a year ago and I finally worked up the motivation to paint them.

Tell me how bad I am, I have no idea what I'm doing, how do i get good?

>>44337859
Add a wash and put on some highlights and it'll be fine
Honestly as a starter you seem fine to me. What I'd really work on is your picture taking skills

Is it easier/more common to glue a Daemon prince's shoulder and leg armor before priming and painting the body or after the skin it goes on top of is painted?

>>44337650

Because you totally mentioned they weren't your models to begin with.

I got a pewter mini with a slotted bottom and a slotted plastic base.

How the hell do you get them to stay. The gap is too wide for any glues I have. I don't think blutack is strong enough to be permanent.

>>44338574

You need to fill it with epoxy/greenstuff. What I did was cut up square toothpicks and stuffed them in the gap and superglued it. Only took one toothpick's width. There's also thicker, gel superglue and similar products used to fill gaps and you can use that but you have to hold the model upright while it dries.

>>44337289
Holy shit, Aussie-anon here, those look awesome man! Unfortunately I've been flat out cleaning my place for the relatives so I haven't even had a chance to touch my models. Thanks again, I've sent you something else (this time by proper mail) with my own Xmas card because I felt so shitty I didn't do it for you.

Also, this is the first time I've ever worked with Bones, what are the things I should look out for when prepping/painting (aka what do I do?)

File: Night-Lords-Terminator-Lord-WIP.jpg (210KB, 720x720px) Image search: [Google]

210KB, 720x720px

Just about to paint this Night Lords Termi Lord and some more regular termis I slapped together, going to be a cheeky bugger in zone mortalis and use Sevatar to deep strike all the dudes with no mishaps.

File: Freehand.jpg (224KB, 938x764px) Image search: [Google]

224KB, 938x764px

>>44322425
Anon asked about the freehand on my TermieLib.
Here it is. Looks kinda shitty up close, but at arm length it's fine looking.

>>44339170
I actually really like it, thats a really nice freehand.

for my converts for my DA, i have a thin plastic stencil I made to paint over

Any UK/EU anons know where I can buy a nice brush set from?

>>44339170

Yeah it could have done with a darker grey base, followed by lighter grey, finishing in white to make it smoother but that's something to take with you next time I guess

>>44339170
Is there a reason you refuse to thin your paints?

>>44339448
That's not a bad idea.

>>44339490
I do a codex grey base followed by ceramite white. Then a skull white coat.

>>44339470
There's this small underground website called amazon.co.uk

Looking into getting an airbrush, any recommendations for a newbie? (I already have a compressor from a friend who couldn't take it with him).

>>44339738
http://www.ebay.com.au/itm/1-6HP-Voilamart-Air-Brush-Compressor-2-Airbrush-Spray-Guns-Stencils-Hose-Art-Kit-/121704702509?hash=item1c562a622d:g:Z04AAOSwo0JWJdRt

shits tops, cheap and easy, just like your mum

File: WP_20151220_009.jpg (456KB, 1918x1077px)

456KB, 1918x1077px

Should I add flock to this? I was thinking a very yellow green(summer grass).

File: Kaeris Crew.jpg (421KB, 1322x643px) Image search: [Google]

421KB, 1322x643px

slight update on my Malifaux, slowly working through my massive backlog, still have far too many models left to paint though.

>>44339920
Wow, your brushwork on kaeris's skin is really nice. bases look very plain though, are they done?

>>44339939
Thanks, Kaeris was really fun to paint. As for the basing; I've done the firestarters base and I'm going to finish basing everything else all in one go once i've got the rest of the crew sorted.

Going to try greenstuff and ayumayu (or whatever its name is) for the first time, any advice?

>>44340232
Keep your tools wet. Greenstuff might be easier to sculpt if you let it rest for few minutes after applying to miniature.

>>44340232

First press small amounts into the most detail areas, Don't be afraid to apply a little force. After that you can just fill it up.

>>44339920

I'd love a zoom in on the skin on that chick very good.

I consider myself a somewhat accomplished painter but I've always struggled on Human skin

I fucked a bit of gluing up, and I need to fix that.
I heard about putting in it the freezer, to break the superglue bond. But I'm concerned with the paintjob, will it be affected?
Superglue, plastic models, gw paints and no varnish if it matters.

>>44340451
>put in ziplock bag
>put in freezer
Done

>>44340430
The skin only really looks good at a distance, it's too thick and it's something I need to work on in the future, i'm still happy with the mini overall and it looks fine when on the table.
Skintone is basically done with a basecoat of GW Ratskin flesh then just adding white and shading the recesses.

File: closeup.jpg (145KB, 441x430px)

145KB, 441x430px

>>44340511
hurr, forgot my image

>>44340469
So the paint won't break off, only the glue?

>>44340522

xD diddies

>>44340561

It won't break off but it'll become brittle enough for you to safely snap it off with little resistance. You'll still have to wiggle off the rest with a knife.

>>44340561
The glue bonds a lot of water in its structure, that's why the freezer treatment can get it loose. The paint evaporates most of the water, so it won't be damaged much by the cold.

Are these brushes worth it? $10 dollariedoos a brush is what people tend to recommend. I need a full set as all mine were broken by some autistic fuck (long story). I'm ordering a bunch of stuff from this website, wondering if I should toss the brushes in too.
http://www.back2base-ix.com/brushes-p420.html

Otherwise I'm also getting a bunch of stuff from these guys. What brushes would you recommend?
http://www.tabletopempires.com.au/Hobby-Supplies/paint-brushes-13/the-army-painter-68
ive never had good brushes, best I ever had was hogs hair. Want some good ones

>>44340628

Look for kolinsky liners on aliexpress if you want it to be cheap

Mo' money, mo' models

>>44340575
>>44340597
Got it, thanks buds.

>>44340658
I hate this attitude. You don't go woodworking with dollar store tools do you?

>>44340658
Ehhhh I've got more than enough models (for me at least) so mostly I'm just looking for quality now, something that'll last me a good while. Plus, chinaman's got me covered for cheap models.
>>44340694
My thoughts exactly. Any recommendations?

>>44340711
I like the Windsor & Newton series 7 brushes, they hold a point really nicely and they're not massively expensive, I think I paid about £6-7 a brush.

>>44340763
>Winsor and Newton
Just looked them up, they're about $20-30 a brush. That's a little overkill.

>>44340795
fair enough, I do feel that they are really good brushes, and if I can find them cheaper I really can't recommend them enough.

>>44340829
Will keep my nose to ground for them. In the mean time, I think I'll run with the first ones. A full set for $60 isn't that bad and they seem like good quality brushes.

>>44340795
order from eu and take advantage of the strong usd

>>44340795
You looking at Dick Blick or something? Amazon has them at @ $15-20 a pop.

>>44340878
Aussie here. Our dollar is quite weak right now.
>>44340893
Again Aussie. Amazon shipping to here kills most bargains.

>>44340954
Perhaps look at Rosemary and Co brushes? They're a UK brand so they may be available cheaper?

File: 2015-12-23 13.12.54.jpg (2MB, 4128x2322px) Image search: [Google]

2MB, 4128x2322px

"The weather is fine!" I said.

"It's not that windy!" I said.

"It's not that cold!" I said.

"That can probably isn't as bad as I remember!" I said.

The most powerful nailvarnish remover I can find yeah?

Thank fuck this was a test model.

>>44340991
If it's metal, yes. Otherwise get one without acetone. Or it'll dissolve the model.

>>44341086
Plastic, so yeah i'll find something acetone free.

Might just stick with black primer from now on, don't understand why it's so hard to prime white nowadays. I've had nothing but bad luck with the stuff.

File: 71V3uBnP6qL._SL1500_.jpg (241KB, 1500x1500px) Image search: [Google]

241KB, 1500x1500px

recommend me an airbrush

I've never used an airbrush before but it would be really useful for me.

I don't have a lot of space so something like this would be ideal:
>https://airbrushes.com/product_info.php?products_id=21078
seems a bit expensive though, and it doesn't have a tank or moisture trap

Is this one too cheap and shitty?
>http://www.amazon.com/Master-Airbrush-Performance-Multi-purpose-Dual-action/dp/B001TO578Q/ref=sr_1_1?ie=UTF8&qid=1411863029&sr=8-1&keywords=airbrush+kit
in some reviews people say it gets incredibly hot

thanks for any advice

>>44341126
get a compressor with a tank on it.

>>44341142
in reviews of the neoair they say it maintains pressure pretty well without a tank, does it make such a huge difference?

>>44341126
A tank is a must have. It makes your airflow so much more stable. Also prevents the pump from overheating.

As for the brush itself, get yourself a good one. Yes that's expensive, but they'll last forever with the right care.

>>44341157
If it uses multiple pistons, the flow should be fine, but that will still leave the heat. Most of these can't run continually for more than 10 - 15 minutes.

>>44340694

They aren't dollar store tools, you just dodge taxes and european labor costs. The brushes themselves are great. You can also get windsor & newtons via aliexpress for 90$ a brush if you choose to. It's just a site that helps you dodge taxes.

>>44341101

Just get vallejo airbrush primers and drybrush those on. I'm from the netherlands, the weather is almost always shit for priming.

>>44341202
Airbrushing in the shed ftw, no wind, and airbrush primers don't care too much about the temperature.

>>44341142
>>44341167
>>44341182
ok thanks, are there any acceptable air compressors for just priming, base-coating and rough shading that don't cost an arm and a leg?

I don't think I need a bambi bb8 and I definitely don't want to spend that much.
maybe I can adapt a cheaper compressor from a refrigerator or something?
I don't have any experience with airbrushing but I'm pretty handy when it comes to other stuff so I think I could do it.

>>44341383
Not one I know offhand, I have an oilcompressor, but those cost an arm and a leg. So those are right out.

Didn't get any tips from last time, so reposting

For my stonehorn's furr, is this scheme good?

Primed with chaos black
Scorched Brown
Drybrush of khemri brown
wash of agrax
light drybrush of bleached bones

>>44339920
Wonderful work

>>44341470
I live in an apartment building so I don't have somewhere to use a noisy compressor, and I'd have a hard time justifying the price of a lubricated compressor to my partner... an expensive oil compressor will have to wait until I have my own house. I guess I'll just get a cheap tankless one and stick to priming/basecoating with it for now.

I know somebody who works in a workshop where they surely have an air compressor. Might be able to get away with using it for any vehicles or 'showpiece' miniatures I do.

Thanks for the advice.

>>44338971

At first I thought there was a chainsaw on the end of that gun.

>>44341523
Isn't there a small battery powered compressor from Iwata on the market now? I have heard good things about it. And it is whisper quiet, might be ideal for you.

>>44338971
Is that the dude's own chainfist hand? Been looking for a way to make the chainfist arm into a sword army.

>>44338634
Prep Bones just like any other mini, wash with soap and water(use dish detergent and an old toothbrush to really get in there), then prime as you would normally or not, Bones can be painted without primer, its more difficult but can be done. As for model lines, I find most times files dont work well on them, so I usually just cut them off with a hobby knife and that can be messy if you take huge gouges out of the model which is easy as the material is real soft. Then paint and seal as normal.

Very cool I look forward to it!

>>44339819
Green and yellow would work, since those are the already used colours I think

File: CTRLALTDEL20081110_GoW2_out_of_gas.jpg (177KB, 625x790px) Image search: [Google]

177KB, 625x790px

>>44341570
>At first I thought there was a chainsaw on the end of that gun.

Nothing wrong with that as long as gas prices stay low.

File: 20151208_125752.jpg (2MB, 4160x2340px) Image search: [Google]

2MB, 4160x2340px

>>44341126
Hold on anon, I'll give you a link when I get home. I did these guys with a 50$ masters airbrush

File: the_emperors_peace.jpg (97KB, 402x608px) Image search: [Google]

97KB, 402x608px

>>44340991

It's plastic? Administer The Emperor's Peace.

>>44342539
I have a hope I can save him. I was looking forward to painting the dog behind him too.

File: nonacetone_results_johnny.jpg (976KB, 2925x1148px) Image search: [Google]

976KB, 2925x1148px

>>44342571
>I have a hope I can save him.


Well, then... listen to >>44341086

>>44342622
That's the plan yeah, going to grab some of that shit tomorrow and see how it works.

Whats the name of the kind of blue you get with Caledor Sky/Drakenhof Nightshade/Teclis blue/Lothern Blue?
Like its not a super light blue, but its not a midnight either

>>44342622
>nail polish remover
Agianst metal I've been told its ok, but on plastic is it safe?

>>44342970
If you intend to let your plastic rest inside that stuff for 15+ minutes: No.

>>44342970
Don't soak it. dip a q-tip in it and lightly brush the paint away.

Takes longer but is produces the best results.

File: nonacetone_results.jpg (461KB, 1600x999px) Image search: [Google]

461KB, 1600x999px

>>44342970
>Agianst metal I've been told its ok, but on plastic is it safe?

It *must* be non-acetone nail polish remover and, as >>44342978 and >>44342997 say, don't let your stuff soak in it like you would with metal models and Dettol/Simple Green/Brake Fluid.

Dip your guys in it and scrub with an old toothbrush. Re-apply as needed, and rinse with lots of water when you're done.

File: image.jpg (194KB, 935x935px) Image search: [Google]

194KB, 935x935px

Needed a break from the largest glottkin brother so I've started on one of the guys on top.

>>44343269
looking good, I like the skin

are there any Dutch bros in here? Im looking to buy a drill with actual drill come with them for not much money.

I only know about the GW drill which is fucking expensive. Help an anon out.

>>44343442

Thanks, the armour is only base coated and washed, still WIP

File: wipgunsmith.jpg (196KB, 499x702px) Image search: [Google]

196KB, 499x702px

been working on this today, counts as gunsmith for my Arcanists (having to wait til February for the actual models to come out sucks.)
I'm not sure what colour to do the hat and coat, I'm thinking either grey coat and a dark bluey grey hat or brown coat with a black hat

>>44343448
Will look once I'm home, relevant site isn't working on mobile.

>>44341616
Frank Ippolito (Face off, Tested) has plugged that a couple of times; but he's probably running a shop conpressor for his main air, too. It does seem like it would make a good travel compressor, but maybe not the bast main compressor.

File: IMG_20151223_191026.jpg (120KB, 1200x1200px) Image search: [Google]

120KB, 1200x1200px

>>44343489
nice mini and nice paintjob anon, i'd go for a dark grey coat with matching or black hat

update on von Horstman, baudros is as good as done. not entirly happy with the base, suggestions anyone?

>>44343853
For a beginner such a simple compressor might not be a bad idea. Especially if they are only priming and basecoating with it.

File: IMG_20151223_191053.jpg (138KB, 1200x1200px)

138KB, 1200x1200px

>>44343905

Hey WIP, I'm doing my shopping list for my project box and I've hit a snag, I don't know anything about super-glues for reisen models and I need a lot since it's gonna be a sizable part of my army.

I've got mixed reports about Loctite and Gorilla Glue from a few other sources but I've found /tg/ recommendations have been pretty dead-on. What do you guys say?

File: IMG_20151223_190937.jpg (147KB, 1200x1200px) Image search: [Google]

147KB, 1200x1200px

>>44343938

File: IMG_20151223_191118.jpg (118KB, 1200x1200px)

118KB, 1200x1200px

>>44343966

>>44343963
Either of those are fine.

Get two part epoxy adhesive for some of the weaker gaps that need something more.

>>44343963
Both come highly recommended from various sides, I don't think you could go wrong with either. Might want to wait for more knowledgeable people to comment for the specific types though.

Emma's hand gestures really piss me off.

File: skullz.jpg (446KB, 1600x1200px) Image search: [Google]

446KB, 1600x1200px

What's a good way to paint servo skulls? Should I base them in white, black, or silver?
I don't want to experiment on them because stripping would be a nightmare, they're so small.
Anyone here have any tips?

>>44343459
cheapest I could find:
http://www.sceneryworkshop.nl/drill-handboor-tl5001.html
http://www.sceneryworkshop.nl/pin-vice-5-drills-handboor-tl-112.html
they're €8,25 and €9,50 respectively rather than €22 for the GW version.

>>44343448
Sorry, >>44344366 was supposed to point to your post, not the other one. My mistake.

So I've got every other paint for painting ork skin besides the base-coat, Waagh Flesh. Any other GW or Vallejo paint that works well? (I don't have the Vallejo equivalent either unfortunately.)

>>44343448

Pinning drills are what you want. You can get a decent set at almost any hardware store or aliexpress. Any cheap one will do for plastic, the better ones can do metal too.

File: 20151214_141708-1.jpg (172KB, 507x567px) Image search: [Google]

172KB, 507x567px

>>44344282
Primed with Vallejo grey primer, silver all over, based the skull with brown and worked the color up from there. Its not gonna win a Golden Demon but I think it looks fine.

>>44344377
>>44344366

thanks a lot, gonna be 5 euro verzendkosten anyways, still cheaper than GW stuff

>>44344797
Thanks m8

File: Night-Lords-Terminator-Lord1.jpg (220KB, 720x720px) Image search: [Google]

220KB, 720x720px

>>44341625
Yeah Bro its just his original chainfist hand, all you have to do it cut away the bottom and clean it up and you can then chuck anything on it! Priming is now done, time for some details.

>>44344819
happy to assist.

>>44345038
those are some sexy looking models, is the the battle at calth set?

File: image.jpg (60KB, 649x638px) Image search: [Google]

60KB, 649x638px

>>44345038
>that mold line on the auto cannon skull

Nightbro I can't even...

>>44345195
Yup Catlh set with bits thrown on I had lying around
>>44345211
ah yeah would you look at that, cleaned the rest of it up but missed that, will fix that up just for you

>>44345211

It came out of the manufactorum like that. Dark mechanicus doesn't give a shit.

NL bro, cover that line up with a greenstuffed flap of flayed skin or something cool like that

File: Submariner.jpg (475KB, 2336x1120px) Image search: [Google]

475KB, 2336x1120px

Haven't painted in ages but this was my very first one I ever did, about 6 years ago now. Was very proud of it and I still am I suppose. Excuse the god awful camera resolution

>>44345398
god that looks even worse than I thought. jesus christ

>>44345398
>>44345443
the resolution isn't so much the issue as the focus. Put those models on a simpler background (a single colour bedsheet will do just fine) and let the auto-focus do its thing in Macro mode, that should come out loads better.

>>44345398

Nice stealthsuit

>>44345617
yeah the optical distortion field is working just fine, but I think that's a Warmachine Gangplank?

File: drybrush.jpg (633KB, 1609x1131px) Image search: [Google]

633KB, 1609x1131px

Finally got to priming and assembling. Got the raised edges, next is anything metal, then brass.
Also, rear sponsons are magnetized and GW sent me a pack of skulls. Gonna add them on when I get my renegade icons in and can work on all that junk.
Also: I'm thinking about two demolisher dozer blades on the front. Anyone have measurements for it?

>>44345767
Warmachine Mariner

File: Skitarii.png (971KB, 1080x720px)

971KB, 1080x720px

Decided to try my hand at painting at last. Any advice for what I could do better next time?

>>44346302
the colours look good, but I'm missing the highlights, so either make those on the grey and red a little stronger, the metal looks pretty good, and I like the lenses.

File: talon strike force hor.jpg (2MB, 2500x1084px)

2MB, 2500x1084px

Working on a raven guard kill team for heralds of ruin, painting up some new models for a less traditional raven guard playstyle. Don't worry, he's a stealthy terminator.

>>44342622
It's pretty strange, but that crusty paint effect on the smurf's helmet actually looks pretty fucking good to replicate a micro chipping effect.

>>44346471
>sarge has no beak
>medic has no beak
>terminator has no beak and isn't using novelty eagle claws
might as well play black templars at this point

>>44346680

You dont see the rest of my army.

>>44346459
Found it really hard to figure out where to highlight outside of the hood. Shit's smooth.

>>44346908
start by only picking out the extreme edges with a lighter tone of the same colour. Then pick out the outer most extremes with an even lighter colour (this will generally only be a small area).

That should help add a little definition to the model.

>>44347017
Thanks, will give that a try with the next one!

>>44346892
Would you trust a man without a beak with your life?

File: 1387744950218.jpg (66KB, 257x331px) Image search: [Google]

66KB, 257x331px

How the fuck do i add weathering/chipping to black models like Iron Hands?

>>44347120

The chapter can't be all beaks, silly.

But point taken.

The storm bolter termie is mostly because assault is kinda awkward in kill team. Especially against my tau opponent.

>>44347244
>prime metal
>varnish
>paint black
>scratch black paint
>metal underneath at weathered points

Just like you would do it with a tank or plane

>>44347244
Break apart some foam and dab on metal with it in areas where you want a chipped look. After that paint around the metal with a dark grey and highlight as normal.

>>44347244
https://www.youtube.com/watch?v=7MbQMwnjqik
Yes this is one of Emma's tutorials, but most of what she's saying is colour independent. You could use a slightly brighter colour for the damage, but the metal parts work just as well on black as they do on anything else.

>>44347385
What metal? Leadbelcher, ironbreaker or runefang steel?

>>44347434
Emma is using Runefang for the metal damage, see >>44347394

File: Taurans Overdrive Combat 10.jpg (205KB, 680x1024px) Image search: [Google]

205KB, 680x1024px

>>44347244
It looks pretty neat if you paint a dark brown into the crevices of the armor. The whole paint chipping thing can be done in a variety of colors. Something rusty like a dark terracotta could work well, depending on what you are going for.
There's a video on warhammer tv for some orky stuff that was painted that way. Can't remember exactly what it was they painted, maybe parts of the stompa, or the new kit that is slightly smaller.
There is also a pretty good WIP thread currently up on the BnC where a guy paints taurans like I mentioned above with red chips.
>pic related

>>44345948
What is that tank?
Its XBONEHUGE

File: comfypepe.jpg (145KB, 670x424px)

145KB, 670x424px

>>44334224
>tfw watching duncan wrapped in a blanket while its dark, cold, and raining outside

Also this damn sponge technique blew my mind
https://www.youtube.com/watch?v=gyuPxJG5kFc

>>44347692
Brace yourself, Brotha.
It's the BANEBLADE!

>>44340658

Leave it to chinafags to be retards.

Your brush is your most important tool that you use 100% of the time while painting. Why the fuck would you skimp on that?

Don't listen to retards who buy shitty, ugly misshapen recasts for advice, because they will only result in you getting shitty, ugly, misshapen results. If you can't afford a $10 sable brush then just play with mud and sticks instead of miniatures.

File: Fuck off dumb frogposter.gif (3MB, 576x324px) Image search: [Google]

3MB, 576x324px

>>44347748
I like dunken too but don't post pepe

Why doesn't /wip/ have a general image?

>>44348034
it does sometimes, just not at the moment

>>44348017
I have no problem getting chinaman recasts, especially for things like Empire models. Plus, their quality is top-notch, and I have yet to receive a model worse than some extra flash or webbing between fingers.

Brushes and paints on the other hand, now those you never skimp on.

File: 20151223_181814.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

Just got back into painting. Finished up this Witch Hunter Assassin today. Starting on her sister after Christmas. Have never taken photos of my mini's before so sorry if it's shit.

>>44348257
Photo quality is good paint job is Superb!.

>>44348257
Don't be sorry, your photo quality is better than most (good job in listening to the advice for taking model photos).

As for the model itself, I fucking love it. Sure there's some details that could use work if you zoom right in, but that is an absolutely gorgeous model. Well done. Especially impressed with the freehand on the waist tunic(?) between her legs.

Only recommendation would shrink the filesize down to around 1-2mb

>>44348257
nice solid paintjob looks good.
Just out of interest how did you do the metallic blue?

>>44348024
>he doesn't post dank pepe memes

Autist/10

>>44348257

Are you playing a mage hunter list?

I'm planning on buying a Ret army in the future and it's just Ravyn, Discordia, shit tons of Mage Hunters, two Stormfall Archers, and some Mage Hunter solos and Eiryss.

>>44348337
Looks like basecoat silver -> blue wash -> edge highlight

>>44345038
dog the handle on that chain staff thing is wonky as FUCK

>>44348917
just the angle bro, its pretty straight

File: wipgunsmith2.jpg (172KB, 480x715px) Image search: [Google]

172KB, 480x715px

slight update on my gunsmith. Got the basecoat and wash onto the coat, I'll be making the coat look a fair bit paler once I start highlighting it probably.

File: IMAG0537_1.jpg (263KB, 1264x1813px) Image search: [Google]

263KB, 1264x1813px

Which do you think is better; rounded or the angled chest I had before?

Anyone here have any luck creating a juggernaut mounted Khorne Lord for 40k? The only cavalry legs I'm finding are the Thunderwolf ones and to be quite honest the fantasy model looks good enough that I'm considering running it vanilla as a human Khorne Lord leading the warband if the conversion is a hassle.

File: 1450921433344-978695310.jpg (3MB, 4320x2432px) Image search: [Google]

3MB, 4320x2432px

What do you all think about magnetizing guards men? So far I'm magnetizing 4/10 guardsmen so that I can quick change my sergeants and special weapons dudes. Thoughts or opinions?

File: 1450922016818-793229173.jpg (2MB, 2976x2976px) Image search: [Google]

2MB, 2976x2976px

>>44348337
1:2 (drops) highlighted by 1:4 respective to the image. Then highlighted the whole thing with Citadel chainmail mixed with white.
I was experimenting and I never used the metallic medium so I thought why not and just started playing around with it and found a nice mixture.

>>44349776
Oops

File: DK7.jpg (166KB, 694x526px) Image search: [Google]

166KB, 694x526px

>>44349620
Got one I did up quick and dirty, haven't finished it though. Terminator legs worked.

>>44349826
I like the bone color you have there. would you care to tell me what you used to get that color?

>>44349826
Looks pretty good. I'll pick some up in my next bits shop. Just normal termi legs then?

>>44348535
I run Kaylissa with Mage hunters, a griffon, and a chimera. I've gotten my hands on a metric ton more of ret thats just exploded my backlog but they were on sale and I love the way they look. I dont really know what to do with it all though, because I just play with 2 buddies who run Cryx and Khador.

>>44349870
Brown, Ulthuan Grey, wash with Sepia until you get the shading you want, then thin layers of Ulthaun Grey again finished with edge highlights of any of the bright whites
>>44349907
yeah I was lucky enough to have a few loyalist and choas termi legs lying around and just dry fitted them all until I found one that worked for that particular Jugger (they all have different poses so different legs may work better with some)

File: squad_actaeon_large.jpg (446KB, 3348x1389px) Image search: [Google]

446KB, 3348x1389px

>>44347269
>The chapter can't be all beaks, silly.

We're not even Raven Guard, and yet ...

File: WIP_original_vs_johnny.jpg (359KB, 1281x1937px)

359KB, 1281x1937px

>>44348034
>Why doesn't /wip/ have a general image?

We like to mix it up sometimes.

>>44344145
She looks like her fat pussy really stinks

File: image.jpg (1MB, 2320x1685px) Image search: [Google]

1MB, 2320x1685px

I'm beginning to fall for AoS. Those models so delicious, converting bits and pieces to make another dark apostle to my collection, but thinking about making his backpack removable so maybe I AoS one day.

but it puts me in a pickle because I don't know what to put in his left hand.

Total newbie here, I'm assembling my first bac marine and having doubts on whether or not I should glue the gun arm before or after primer.

What would be the most efficient way?

I'm using Zap a Gap glue if that matters.

>>44353223
I play iron warriors, so the bolter and armor are the same color anyways, so I glue it before. I use plastic glue by the way, as it has a better bond than super glue because it melts the plastic together. for my blood angels, I glue the arms on, but leave the bolter off and just super glue it in after both the body and gun are painted, scraping some of the paint off the contact points so it glues better.

>>44353223
>>44353484
I do use superglue for things that already have paint on them though, like by blood angels in the previous post where I glue in the bolter last

>>44349549
round for sure

>>44343112
And a mr. death eagle too?
What kind of gun is that again?

File: death_eagles_trio.jpg (382KB, 1600x745px) Image search: [Google]

382KB, 1600x745px

>>44354469
>And a mr. death eagle too?
>What kind of gun is that again?

It's just a bolter, perhaps with some kind of suppressor. A lot of unusually armoured models from Rogue Trader days bear strange-looking weapons.

So, I just found some small silver pendants that were left by my grandfather before passing away, and I found an amazing crane whose head is just 2 mm bigger than a pauldron.

The head alone fits perfectly into my plague doctor inspired raven guard successor chapter, and i think it'd be nice to add them both in his memory and for aesthethic reasons.

My question is, How well does silver hold primer/paint? What kind of glue would you anons suggest?

>>44354921
I would probably not make my grandfathers silver pendants into models.

File: catomg.jpg (71KB, 430x480px) Image search: [Google]

71KB, 430x480px

>>44355852
I second this, seems disrespectful and flippant

>>44354921
Just make a mold out of oyumaru and cast it in greenstuff.

>>44356130
This.
Craneheads for all sergeants while actually respecting your grandfather.
https://www.youtube.com/watch?v=hTq6qkWbpsY

So instead of painting details on my Night Lords I started on my World Eaters tac squad......

File: World-Eaters-WIP4.jpg (247KB, 720x720px) Image search: [Google]

247KB, 720x720px

>>44356414

is there a way to make a gyrobomber into a small airplane?

>>44341126
I'm just learning the ropes with using an airbrush so I got the Amazon deal and have to say I'm perfectly fine with it. Honestly I think the whole needing a tank thing is really for people that actually use an airbrush more commercially, like painting their walls etc. These are mini's, your going to be using short controlled blasts.

For the price, I think it's great for a beginner, you can always splurge out on the more expensive equipment later when you actually know what your doing.

File: First dedicated bomber.jpg (1MB, 1808x1396px) Image search: [Google]

1MB, 1808x1396px

>>44356541
It would be more about scratch building an airplane and fitting as much of gyrobomber into it.
And if it's supposed to be (designated) bomber, I doubt it will be small. Because wings.

File: 94E1A834-4107-4A84-9969-1D61B8AC6E48.jpg (2MB, 1936x2592px) Image search: [Google]

2MB, 1936x2592px

>>44356541
>>44356603
On the other hand, there's this guy...

>>44340991
I made an even worse mistake, with a limited edition White Dwarf model.

>>44352423
Unless you want to have a shield or something particular, I'd say he looks like he'd go well with a pointing hand.

>>44348017

Leave it to retards to make assumptions. I use windsor & newtons myself but I was curious about the quality of china kolinsky brushes so I bought a pack and was pleasantly surprised. Yeah, not 40 dollars a brush worth quality but at 3 dollars a brush you can't buy anything remotely as good anywhere else.

>>44349667

You could just get more guards instead huehuehue

>>44356421

Fuck yeah white scars

>>44356695
um... anon, i've got some bad news for you...

>>44349549
>Avecs Sons Chapter

>>44349549

This is just begging to have grenades thrown into it

>>44356638
Damn son, sorry for your loss.

>>44356638
What have you done?

Could we include this in the future OPs?
http://www.mediafire.com/download/zo9oio39b1l2rm6/%5BScale_Modelling%5D_-_FAQ_of_the_AFV_Painting_Techniques_by_Mig_Jimenez.pdf

>>44334918
T H I N

>>44339920

The best Rail Golem that I had seen.

File: ogre boom.png (1MB, 691x704px) Image search: [Google]

1MB, 691x704px

My 4th and last leadbelchers, the thunderfist!

I'm going to paint the Stonehorn in the next week, does anyone have tips/tutorial for the Stonehorn?

I hate asking, but does anyone know where I could find cheap Alpha Legion conversion bits? I've got 30 marines to modify and $90 per ten is just ridiculous. I've found some on various sites, but they disappear within a day.

>>44358244

Do you mean third party stuff? Did you check the usual places like chapter house and various fora?

>>44358280
Basically recasts.

>>44358244
I think you can get some stuff from spellcrow.
Maxmini might have some too.
Aside from that you could look into recasting.

>>44358287
Issue with recasts is that one day they exist, the next they're gone. I'm trying to find recasts of the Forgeworld bits, but it'd be nice to find something that's there for more than 24 hours.

>>44358286
>>44358335

They're quite easy to find but we can't post them here because GW monitors 4chan

>>44358376
I'd offer contact info of some sort, but 4chan. God dammit, GW.

>>44358335

I'd go with Z if you're a poorfag. It's like 15$ for 10 each torso, head, shoulderpad.

>>44358376
>GW monitors 4chan

for sure

>>44358386
Just use google. Its not that hard

>>44358386
>>44358376

Yeah because GW hasn't found the big recast subreddit board with instructions, reviews and shit so they have to troll 4chan for their info.

https://www.youtube.com/watch?v=MjQS4houOb8&list=WL&index=5
Last Advent Calendar video, Duncan does Calth Word Bearers.

>>44358401
That was actually helpful. Thanks, man.

>>44358335
I meant recasting yourself. Buy one FW kit and then make molds of it.

>>44358402
>>44358421

This is the same company that modernized their webshop only 2 years ago and doesn't collate a rise in sales with opening up shops in a region.

>>44358244
Give me a throw away email and I'll swing you a chinaman catalog

And Merry Christmas from Aus-land WIP

>>44358649
[email protected].

>>44358681
>[email protected]
Sent. Let me know if you got it

>>44358789
Received. Thanks, Aus-anon.

>>44358802
Forgot actual email, check should be a second email with his email

>>44349219

Is that from the female Malfiaux character kit?

I was considering picking one up so I can make a proxy Obedient Wretch for my metal Hamelin crew.

>>44359426

Ethyl butyrate is just a weaker corrosive than butyl butyrate but it's still pretty goddamn corrosive.

Anyone got any ideas of things I can add with greenstuff to change one of my Ghoul models to look more like a Dreg for mordheim?

File: zbzs.jpg (192KB, 360x400px) Image search: [Google]

192KB, 360x400px

Out of curiosity, how does a sponging/stippling technique transfer to large vehicles?

Basically like the pic which is almost pure sponging, would that carry over well enough to tanks?

>>44359669
Our lord who art in heaven Duncan has used this on tanks and even a gorkamorka. You just pick out the edges and use the sponge to stipple along the edges, first a brown and then over the dried brown a steel for added effect

File: 12011272_10153565031846788_2173159396967415542_n.jpg (19KB, 500x251px) Image search: [Google]

19KB, 500x251px

>>44337289
I... I actually like the way you got the red to look. Very solid? Not sure that's the right word. Bold? Bright? Anyway, not bad IMO. Just remember...

>>44359772
I know what you mean, it almost looks like the red is a leather. It's nice and thick, kinda adds to the effect

thinking about repainting my chimeras. should I strip them or is it not necessary on vehicles?
paint job is not bad, but I just want to change the tank pattern

Okay anons, I'm looking to convert a plastic daemon prince into a warboss. The stock bosses are so weedy, the that prince is RIPPED. Trying to decide what to do with the legs, the digitigrade legs of the prince make this kinda tricky. Any suggestions?

>>44359967
swap head for a fantasy giant head

you could also do dreadnought legs

rob a gundam model

the legs for the Boneripper work as well. As long as you feel its ork feet.

you can always cheese it with total mechanized replacements, but that feels wrong to me.

>>44359947
Depends, have you got a pic on hand to give us an idea. Stripping is always for the best, but if it's just a simple pattern might work to just cover
>>44359967
Why not use dreadnaught or just plasticard some cybernetics legs. Make him like that Ork HQ who had metallic crows legs

>>44349826
Wash that metal. Everything else had s but of dirt and grime to it and the metal looks really clean.

File: 7867.jpg (102KB, 960x540px) Image search: [Google]

102KB, 960x540px

>>44360017
scratching away the greenstuff on the green one

File: 10 (1280x909).jpg (722KB, 1280x909px) Image search: [Google]

722KB, 1280x909px

>>44359669
I did just that with this tank just recently, sponged on a couple of different colors during the weathering process.

File: wip12 (731x1024).jpg (347KB, 731x1024px) Image search: [Google]

347KB, 731x1024px

>>44359772
Thanks! Here's a small update, some skin base coated and a quick wash. The red I used is Heavy Red from Vallejo Game Color. Part of the reason it took so many coats is because that color is "extra opaque". Working on the skin, then highlights. Trying to have this guy wrapped up today.

>>44360790
looking great, especially for this close up. did you miss the neck, or are you going for like black bodysuit look

I remember seeing a picture of someone casting a quarter of a leman russ to make terrain out of it, would anyone happen to have that picture, or any other short terrain making pictures.

File: mold.jpg (952KB, 600x2244px) Image search: [Google]

952KB, 600x2244px

>>44361084
Here you go.

>>44361958

I've got to get me some of this stuff once I have a nice large workplace to hobby on

>move back in with my parents for financial reasons while I'm starting my own business
>tfw more warhammer filled moving boxes than actual things with practical uses

File: 55ad60707f6b3.jpg (474KB, 800x1079px) Image search: [Google]

474KB, 800x1079px

Can anyone tell me what the base model for this is? Also any tips for painting in a similarly slap-dash style are welcome.

>>44364317
it looks like some sort of horse greenstuffed to a daemonette upper half, the painting style has a name which i can't remember, having to do with a GW artist who drew in that style

>>44364317

Kinda looks like LotR shadowfax with a daemonette on it. You could just get any horse model and make something similar.

>>44364317
Not a clue on what the model is (looks like it may have been a GW Shadowfax from the LotR range), but the painting style looks like it might be Blanchitsu, which is the style of painting pioneered by John Blanche of GW. He used it both in his art, and in his models. The highly stylized colour scheme certainly looks like something his style might do.

>>44364317
the deer from those wood elf cavalry with a daemonette on top

File: john_blanche_in_1986.jpg (824KB, 1413x1675px) Image search: [Google]

824KB, 1413x1675px

>>44364419
>the painting style has a name which i can't remember, having to do with a GW artist who drew in that style

Are you thinking of John Blanche and "Blanchitsu?"

>>44364542
yes, i realized it shortly after but someone else had responded with that

>>44364475
>>44364542
indeed he is, the super limited palette with lots of reds, yellows and blacks screams John Blance's style.

File: 20151224_095553.jpg (1MB, 2391x1345px) Image search: [Google]

1MB, 2391x1345px

Made a pair of simple portals

>>44364591
The transition from yellow to orange is lovely but the white to yellow is too harsh. Gently make the white center a little smaller and brush on some white onto the yellow

>>44364475
>>44364576
this one is actually done by Blanche himself. He's got a very particular and difficult to imitate style though.

>>44364916
Cool, didn't realise it was an actual Blanche piece. But you are correct, it's a very tricky style to try and copy.

File: bloodwarrior (1076x1280).jpg (647KB, 1076x1280px) Image search: [Google]

647KB, 1076x1280px

>>44360790
This is about as far as I want to take this guy for now. The pics suck, my shitty "light box" is buried in my closet atm. As >>44361006 pointed out I kinda ignored the area around his neck, not sure what I'm gonna do with that. Also I missed one mold line on the very tip of his axe that of course I just now noticed. But this was a good test model. I need to find a better red to highlight with.

I had a lot of fun painting it, thanks again to Aussie-Anon for sending these my way!

>>44359174
sorry for the incredibly late reply but yea, it is.

I completely screwed up on a coat and the model is soaking in paint stripper now. Managed to remove the head so it's not a complete loss and I can just stick it back on I guess

File: 20151224_163145.jpg (5MB, 4233x6090px) Image search: [Google]

5MB, 4233x6090px

Alright guys, sorry about the crap lighting and my crap photography skills, but this is the basic scheme I've got for my Gal Vorbak.
These are the first models I've got in a real long time that I actually want to look good, instead of just be painted.
Feels like I'm missing something, should I take some watered down Blood for the Blood God to the muscley/fractured areas, light on the right of the chest peice or the left thigh (from our view)? What should I wash on the guy's abs below his bone cuirass on the bottom right pic? The glint from the current wash just seems to distract from the pop of the bone.

File: this one.jpg (1MB, 2449x3113px) Image search: [Google]

1MB, 2449x3113px

>>44365393
>>44365501
Maybe it actually rotated this time.

>>44359703
>>44360671
Thanks, this is super helpful.

So then if I got it right, for the tank I'd change the painting order?

The model is simply Khorne Red -> Wash -> Sponge Evilz Sunz Scarlet -> Blackline. Plus black & silver in the battle damage.

For the tank to be consistent with the troop scheme though, I'd do Evil Sunz -> Sponge Khorne Red -> Blackline?

>>44365700
That demolisher was the first tank I've painted, I really flew by the seat of my pants the whole time. I airbrushed my base color and highlights then sponged various brown/rust/silver colors. Then the water stains and streaks, then blackline. Sorry I cant offer more helpful advice, but the mini you linked looked great so I'm sure whatever you decide will be fine.

Primed my first commission

Think I have the equivalent of stage fright

Any advice?

>>44366094
Just paint like you always do. That is what he pays you for after all. No need to worry.

>>44366094

Imagine your client naked.

File: tumblr_mm36d7GXgP1sn4kv5o1_1280.jpg (256KB, 700x969px) Image search: [Google]

256KB, 700x969px

>>44366094
Imagine your client is...., then imagine them naked ;^)

Someone comment on my shitty Gal Vorbak.

>>44368210
Nice stealth paint scheme, I can hardly see him!

>>44368260
Thanks, see
>>44365393
>>44365517

>>44365393
>>44365393
Turn the flash off and try again. The runes seem like the paint was too thin when you painted them, what did you use to paint them? A wash would also do some good

>>44368302
Those are two photos with flash and without, do you just need a better angle on the ones without flash? The one below it has no flash either. The runes are Lich Purple. What color would you recommend for a wash?
Though I will give the runes another coat, I appreciate your feedback, truly.

File: tau_cloaked_stealthsuit.png (867KB, 632x787px) Image search: [Google]

867KB, 632x787px

>>44368260
>Nice stealth paint scheme, I can hardly see him!

Sometimes, that's how you know it's done right!

My wife bought me a pretty nice-looking Paasche Talon double-action airbrush and D500SR compressor for xmas. Are there any top-notch airbrushing guides I should read/watch? I figure I'm gonna practice on paper, pieces of cork, etc. first.

In particular I'm looking forward to priming & painting a Heldrake and a Razorback, since I wasn't really looking forward to painting those big flat surfaces by hand. I also have the Chaos half of the Dark Vengeance set to paint up, in Emperor's Children colours, I think.

>>44365700
Here's an example. Skip ahead to the end to see the technique.
http://youtu.be/4l0k8TeHgeA

File: 1ksons.jpg (26KB, 330x449px) Image search: [Google]

26KB, 330x449px

So I found this 30k Thousand Sons tutorial online, and its super easy, it just uses a bunch of washes. But does anyone think its too much of a dark red? I kinda like it but I wanna stay more true to their color scheme.

File: 1ksonscamp.jpg (59KB, 427x520px)

59KB, 427x520px

>>44369281
I didnt paint that, but its the end result of the tutorial. Here is the FW one if someone doesn't know what they look like

>>44369299
>>44369281
I agree, it is way too dark. You could experiment either with the metallic red which vallejo produces, or you could use GW metallics and paint it like you would any metallic piece, then glaze or wash with red, bloodletter i think it's called, and see how that works out

>>44369481
Il try out the bloodletter wash on my test model. Thanks for the input.

File: 1368414909014.jpg (33KB, 433x334px) Image search: [Google]

33KB, 433x334px

>Got Betrayal At Calth from GF for christmas
>Don't have the money to order the Iron Hands upgrade set from FW
Kill me.

>>44369681
You can still build up the termies, characters, and walking bathtub. You could clean up all the bits from the sprue that you plan on using too and have it all ready, you may find a way to pay for the IH upgrade set by the time that's all done if you're as slow as me.

>>44369681
Chinaman

>>44369281

That's Word Bearers red. Just replace whatever step he used to do the red with Tamiya Clear Red.

>>44369681
>has a gf
>has a gf who buys him models and supports his hobby
>kill me

Gladly. Then I'll take your wench too.

>>44369757
alright, il pick some of that up. Thanks

What's the best way to get paints out of a drybrush? I will clean it out with water but a little bit of the other color i used previously seems to stick in.

>>44369900
airbrush cleaner, which is some sort of solvent. alcohol might work, but i'm not sure if it will do anything to the airbrush

>>44369900
Soak it in simple green. Paint falls right out when rinsed afterwards.

>>44369930
>>44369955
Thanks for the tips, I'll try it out soon!

>>44369900

Buy a cake of brush soap. You're going to need it to clean, shape, and store your nice brushes anyways.

>>44369900
Detergent-free soap

>>44369681
Me again. I have some shoulder pads from the GW upgrade kit. Will those work?

File: 1.jpg (2MB, 4597x2741px)

2MB, 4597x2741px

The "I hope this gets some replies for when I get up in the morning edition."

Just added some watered-down null-oil to the recesses above the teeth in his maw arm to make it less monochromatic.

Thinking about putting some watered down ard-coat into the chest plate fracture and runic embeds.

>>44370328
I'd say there is a little too much blood on the maw arm.

>>44370328
around the runes make it less purple, and it looks like you highlighted the legs without main colouring it after the wash. base, then wash, then rebase most places, then highlight

>>44370328

GOOD MORNING GAL VORBAKFAG I'M SPEAKING TO YOU FROM THE PAST

AM I DAEMONS? OOoooOOoooO

>>44370358
That's absolutely fair. It's supposed to highlight the teeth, not overpower them.
I keep trying to get a new, better picture, but it would seem that the camera is just making appear glossy as shit. I might just reapply the Ushati Bone to the upper teeth and go over it again with a more watered down BftBG to make it look more like a gum line than a gore fest.

Thank you for your input, I really do appreciate it.

>>44370440
No problem, I do like how it is coming along!

>>44370417
>highlighted the legs without main colouring it after the wash
Sorry man I don't quite follow, though I wouldn't be surprised if I highlighted wrong, since it's something I rarely do.
>base, then wash, then rebase most places, then highlight
Ah so I essentially "washed too much" and need to just reapply the unwashed color to most of the inner section? I just should keep the wash around the edge, where the highlight will appear?

>>44370516
you washed the entire leg with what looks like black, when you should have selectively washed the recesses to create contrast. with the entire leg washed, it looks splotchy

>>44370565
Gotcha. Avoid slathering the thing. No splotches.

>>44364482
this

>>44369767
>wants a gf that drives you to suicide

>>44369281
The red is a little on the deep side, what metallic did they use as the base? You may need to use a brighter one. Also, the red wash is quite dark too, a brighter one may also help.

>>44369900
>What's the best way to get paints out of a drybrush? I will clean it out with water but a little bit of the other color i used previously seems to stick in.
>>44369930
>>44369955
>>44370119
Cotton Swabs are your friend, and like others have said, airbrush cleaner is very useful.
Be careful with alcohol, as it may gunk up the paint a bit, which makes it harder to remove.

Once you're done cleaning, flush with water to remove any traces of the cleaner and then switch colour.

>>44371276
They all do that.

>>44371534
might be playing for the wrong team there champ

File: 78987.jpg (73KB, 540x960px) Image search: [Google]

73KB, 540x960px

painted my second contemptor
GAYFISTS GETTING BTFO

File: 224.jpg (73KB, 540x960px) Image search: [Google]

73KB, 540x960px

>>44372488