Hey po/ do you know where i can find the last version of pepakura designer 3.1.8 full with the patch to view locked models? thanks a lot for your help
>>535361
I have no idea. I just paid for it and receive the updates.
>>535401
Thanks for a really useful post.
Here you go OP, I'm too lazy to write a proper patch so you'll have to apply it manually:
00021DF4: 0F95C3 -> 32DB90
0009568A: 01 -> 00
000977B0: 894108 -> 909090
Using a hex editor navigate to the address before the colon, you'll find the value before the arrow there, change it to the value after the arrow, then save.
>>535428
>00021DF4
I can't seem to find any of those addresses, does it work for the 3.1.8 version?
>>535446
Install hex editor software.
Use that software's search function find those number and replay them.
Then do.
>>535449
I tried with notepad++ with the hex editor plugin, should I use another?
>>535451
HxD is decent and free
>>535453
I've followed your advise, that address does not exist, maybe they changed it in the new version
>>535467
The patch is version specific so the addresses definitely exist. You're trying to edit pepakura3.exe, correct? Make sure you aren't trying to open it via a shortcut as HxD will happily open the shortcut file itself rather than the program it links to.
In HxD hit Ctrl+G to bring up the Goto dialog, make sure it's set to hex and put in the address without the colon, it should take you there.
>>535467
Dunno if the given numbers really exist. Already tried several 3.1.8 exe-files and none of them had those digits. Anyway, I now have a quite good version, however I cannot save as registration code's missing. All the keygen no. did not work. If there is a still valid one, please send to: [email protected] Thanks.
>>535805
me too, can't find that code
>>535835
Try this: 0884-9045-5347
>>535855
Thanks, but the code did not fix the problem, so I tried to find the digits in HxD again what eventually solved the problem. At least for me this worked fine:
00021EF0: 0F95C3 -> 32DB90
00095850: 01 -> 00
00097740: 894108 -> 909090
<<535895
That's it, thank you. But thus we now also have the digits for 3.1.8
HxD will not let me change codes.
any help please
HI po/ do you know where i can find the patch to view locked models?
Thank U for HELP ME!!!
>>538205
Here you go:
https://www.mediafire.com/?cieiz6bztshfisg
Manual patching instructions as usual if you don't trust my program:
000127B3: 894108 -> 909090
00028F8A: 0F95C3 -> 32DB90
0009C99A: 01 -> 00
0009EA50: 894108 -> 909090
(Using a hex editor navigate to the offset before the colon, you'll find the values before the arrow there, change them to the values after the arrow and save)
For anyone who cares, something interesting I discovered while debugging the code path for the new PDO format:
PDO files contain a byte that tells Pepakura whether it's locked or not, in previous versions it would validate this value against a salted hash of the password to make sure you hadn't tried to tamper with the file and unlock it manually. With the "upgraded" PDO format they've introduced in 4.0 the hash check is completely missing, so you can just open any locked PDO made with Pepakura 4.0 in a hex editor, change the byte at 0x44 to 0 and have Pepakura open it without complaint.
Thanks for the help.
According to changelog, they also made this version high-resolution.
>>538244
Ah, so this is what they mean by "Robustness of locked files is strengthened"
>>538244
I know I'm a moron or idiot perfect, but I'm new with this handle hex editors and I hope someone is kind enough forum, to explain to me how can I install the code you shared us, it would be for me a great help and value .
By the way I use the "HEX Editor v6.11 NEO" serves this editor to modify the pepakura designer 4.0 with the code that you're not sharing?
Thank you very much for your help, attention and patience.
>>538271
>>538244
Thanks for your answer and excuse me again, but with this it says at the end of their posting and their patch ....
Also apply the patch or what has to be done on their part with hex editors?
I mean this paragraph:
"For anyone who cares, I discovered something interesting while debugging the code path for the new PDO format:
PDO byte files Contain That tells Pepakura Whether it's locked or not, in previous versions it would validate esta value Against a hash of the password salted to make sure You Had not tried to tamper With the file and unlock it manually. With the "upgraded" PDO format they've Introduced in 4.0 the hash check is completely missing, so you can just open any locked PDO made with Pepakura 4.0 in a hex editor, change the byte at 0x44 to 0 and Pepakura Have open it without complaint. "
Thank you for your patience / understanding, attention and help.
>>538280
>>538278
You don't have to worry about that bit. It's just some technical info I thought people might find interesting. The patcher program handles everything, no additional effort required on your part.
>>538282
Thank you indeed for your time and patience.
Also for sharing this cool patch... Personally, do not use it to sabotage to designers or artists trying to steal his works, perhaps just changing the size of them or remove / put the lines.
Greetings and thank you again.
>>538244
Seems like they fucked up support for some version 3 pdos too.
I get "failed to open" on a bunch my old files. Confirmed it's not a problem with your patch, happens with the original .exe too.
Thank you!
4.0.1 is out so here's a new patch:
https://www.mediafire.com/?p207mx223g6d202
Manual patching instructions:
00012623: 894108 -> 909090
00028E8A: 0F95C3 -> 30DB90
0009C71A: 01 -> 00
0009E800: 894108 -> 909090
>>538301
Sounds like they fixed this from the patch notes. The reduced "robustness of locked files" is still present though, bizarrely.
>>539068
>The reduced "robustness of locked files" is still present though, bizarrely.
Is is still byte 0x44? Because I tried and couldn't reproduce that.
I was just doing it out of curiosity, your patch works fine, thanks.
>>539081
Oh sorry about that, it turned out the offset varies from file to file, look for a 0x02 byte probably with a 0x00 byte on either side within the first ~0x50 bytes of the PDO that's the one you want to zero out. You might have to do a bit of trial and error if there's more than one byte that fits that description (shouldn't be more than 2 or 3 though).
I should also clarify this only applies to the new PDO format that v4.0.0 produces, PDO's created with Pepakura 2 or 3 don't have this problem.
>>539084
It worked.
That's really cool.
>>539068
thank you !!!!!!!
now i can change this :
to this
New version, new patch:
https://www.mediafire.com/?20mqo9qmpocojvl
Manual patching instructions:
000135C3: 894108 -> 909090
0002A40A: 0F95C3 -> 30DB90
0009CD2A: 01 -> 00
0009EE50: 894108 -> 909090
Enjoy.
>>540169
fast like ligthing !!!!!!!
thanks again for your work
>>540169
Thanks anon.
>>540169
Cool!! Thank you. :)
>>540169
Any hope for Ver.4.0.2 and beyond?
Update History
Ver.4.0.0
File format of .pdo was changed. Robustness of locked files is strengthened.
>>543287
The link in the post you replied to is for 4.0.2
SERIAL OF PEPAKURA DESIGNER 4.0.2 PLEASE
>>544533
>Tama.Software.Pepakura.Designer.v4.0.2.Incl.Keymaker-CORE
Google it
Gracias
Hi.
What about patch for 4.0.3?
>>546327
There you go.
00014613: 894108 -> 909090
0002BA5A: 0F95C3 -> 30DB90
0009E64A: 01 -> 00
000A0740: 894108 -> 909090
>>546375
If you look closer, you'll see that the patch part looks the same, but the offsets (the first part, before the ":" are different
This >>546367 is mine, and it's for version 403, tested and working.
To use the hex editor you need to go to (ctrl+g if using HxD), type in the offset (so in the first part of the patch for 403 it would be 14613) and hit enter.
The cursor should go to the correct offset and you should see 89 41 08, which are the values unpatched. You just need to change those 3 values to 90 90 90 according to the patch and then move on to the next part of the patch. Once all the 4 offsets are done you just save and it should be patched.
>>546404
Oh sorry my bad, I was using ctr F instead of Crl G
Does this also unlock editing mode?
>>546367
>PepPatch
Thank you!
>>546428
This patch is to unlock editing on locked or password protected .pdo files.
>>546367
Anyone who can and be so kind to put it so?...>>>PepPatch403<<<
It is that I don't know well how to handle the HEX editors... THANK you very much in advance
Hi. Can you tell me where PepPatch403 download the software? The way they do not explain. Sorry for my English, one google translator
>>546522
>Posts Bartman
>Gets dubyas
Nice!
I'm late but happy birthday.
>>538296
Did yiu ever build the stocking model?
Congratulations, this is one of the oldest threads I have ever seen!
You Rock!! it works!! Thank you so much :)
Is the based patchposter still around?
Will someone be so kind to link me a functioning patch for 4.0.4?
Hi. Could you please give new instructions for hexeditors at least?
Just use 4.03 http://www.tamasoft.co.jp/pepakura-en/download/bin/setup_pepakura403_en.exe
se podria cambiar la Version del Programa por ejemplo si es V4.0.4 a V10.0.0
You could change the Program Version for example if it is V4.0.4 to V10.0.0
Patch for pep 3.1.2 HD for oppening locked files? Hex tut would be enough
>>553258
Saludos me refiero a cambiar la version del programa si es Pepakura 3 ponerlo pepakura 8 por ejemplo
----------------------
Greetings I mean to change the version of the program if it is Pepakura 3 put it pepakura 8 for example
>>540169
>894108 -> 909090
>0F95C3 -> 30DB90
>01 -> 00
>894108 -> 909090
Unfortunately this doesn't work anymore for 4.0.4 .. The values are there, but changing them didn't patch it :-/
any news here for the 4.0.4 guys?
Kind of a stupid question, but can papercraft patterns be adapted to cloth to make plushes? Sorry if it's offtopic, but it didn't seem worth it to make a whole thread
>>554364
You can but plush will not be soft. It will be unnecesary seams and hard corners.
Cloth can bend in two dimension at time to make soft curves, and papercraft patterns avoid do that cause paper cant do it. So it make bad plushes.
Anyway a papercraft pattern can be a alpha version to start modifying and make a proper plush pattern
>>555050
Looks like 4.0.5 is out now too, here's the new offsets:
14683: 894108 -> 909090
2B9DA: 0F95C3 -> 30DB90
9E67A: 01 -> 00
A0790: 894108 -> 909090
thanks guys
this is nice but i feel bad with pirating this. maybe if i get some monies in the near future i can pay the license so i can show my support on the people who made this. you guys should too if you got extra bucks, this software is really nice
>>555291
The patch we're discussing doesn't crack the program, you still need a valid serial. I don't see why you're going all moralfag there's like 1 post ITT actually providing warez.
Testing out how to sage!
Well that attempt to Sage didn't work.
Ahhhh there we go.
Have another Sage, /po/
The patch is only for lock file not for program. The file was lock for creator, that mean you can't edit the file like change size, color, etc.
>>535361
official web page pepakura.ru
>>555349
finally, a true image of the bitch
>>555177
how about 4.0.6? Thanks in advance
>>556087
Here you go, 4.0.6 offsets:
14AE3: 894108 -> 909090
2C25A: 0F95C3 -> 30DB90
A130A: 01 -> 00
A3480: 894108 -> 909090
>>556095
Thanks man, you're a nice guy!