I need a mechanical assistance!!
My car has a 88 305 tbi and it loses oil pressure when It warms up. What could be the problem? I have replaced the oil pump because it went out then it started to do this.
Your engine is worn out. Time to throw out that awful 305 and put a 350 in there.
>>17596679
I have one but I live in California and I need to to smog, is it going to pass??
>>17596693
Leave California you faggot.
>>17596713
no u our touges are good
Smog tech won't even be able to tell the difference between a 305 and a 350
>>17596628
>front license plate
Well there's your problem
>>17596651
pickup oring is common in these too isnt it?
>>17596679
ls swap!
>>17596713
Well offer him a room in your trailer
>>17596651
blowby through the oil sending unit. it's near the oil filter. there should be ....3? wires going to it.. prepare to replace the pigtail as it's going to break apart.
all the SBC TPI motors have that problem.
>>17598026
https://cimg2.ibsrv.net/gimg/www.thirdgen.org-vbulletin/710x722/80-oiltemp_76640a67cef0d500e42a50deedee1b5f1ebc6dc4.jpg
Bump in hopes that OP sees this. Happened to my 89, and my 87 irocz's
>>17596651
Oil pump clearances and general eninge wear
>>17596679 is right you can pick up a decent 350 or 5.3l ls for <500 bucks
Thanks guys I read up on it and it I'll probably put a 350 in it
>>17600224
the 350 will likely see the same fate as the 305.. it's not a big deal, just replace the damn sending unit..
Find a carb 350 and put that in, seriously you can get one anywhere. TPIs had a neat looking intake manifold but they were wacky and had some odd issues. You could probably get a 350 for like $100 running and ready to go.
>>17602279
better idea.. find a vortec 350, throw a high rise and a carb on it and make 350hp all day on the stock cam.