How do I get this fucking drum off. Already busted it and the

Is the handbrake on?

File: IMG_20170427_151806.jpg (3MB, 2160x3840px) Image search: [Google]

3MB, 2160x3840px

The brake shoes must be holding it in since the pin busted. grr

>>17101327
Take a blowtorch to it to heat it up and make it expand.
Unless youve tried that already

>>17101338
No good question

File: 1483358974002.jpg (56KB, 722x349px) Image search: [Google]

56KB, 722x349px

>>17101327
>>17101340
Well, like you're saying; its fucked.

I'd grab the angle grinder and cut the bitch straight in half

>>17101350
No don't have a torch would a drum brake puller be best I've seen them before. obviously the drum has started coming out. Almost broke my finger

Don't own an angle grinder either my neighbor has a garage across the street maybe I should ask him if he does. Blast!

>>17101350
This

Bolt a chain to it using them two bolts you got in there, hook it to another car, and fucking send it.

>>17101327
Drum breaks have a spur like thing inside and if you spin it it might make it easier to take it off

>>17101327
There's a pin for each shoe.
If one is still intact, smack it with a chissel.
Once both pins are sheared,you can pry the fuck out of it and IT WILL come off, with virtually no damage to the other parts.

Hit that shit with a hammer

>>17101327
>3lb hammer
>Adjustment bolt on the back if it's there
>Rotate the drum backwards
>Pry bar
>Submerge in lube of your choosing

File: BrakeAdjustment022640x427.jpg (125KB, 642x938px) Image search: [Google]

125KB, 642x938px

>>17101327
you need to back off the brake adjuster through the small hole in the back plate dont torch or grind on it its stuck on due to the grove worn in the drum by the pads so you need to collapse the shoes

File: 0996b43f80204b88.jpg (17KB, 250x196px) Image search: [Google]

17KB, 250x196px

>>17101327

>>17102027
Why are you namefagging as Alphonse?

File: 1435725703102.webm (805KB, 640x360px) Image search: [Google]

805KB, 640x360px

>>17102136
No reason.

>>17102124
>>17102027
These I can do. Going to remove the other side to see the adjuster cus I have tried to stick a screwdriver back there it's just dokng it blind. Thanks for the help gotta get a new drum.. every event is a learning event right

>>17101327
Go to NAPA and buy a puller.
https://www.napaonline.com/en/p/SER833

Hey OP, do you have the parking brake set?

>>17102834
Negative
>>17102801
Gonna get the brakes loosened first. They're pressed against the drum and that's what's doing it.. gaah.

>>17101327
did you not slacken the adjuster..?

>>17102992
No I did not I'm an idiot

>>17103028
well, that's what'll happen if you don't do that, its likely not even the brake pads themselves but the entire shoe being dragged cockeyed and with the springs pulling them together its sort of more like just the metal part of the shoe being stuck against the backing plate

>>17103077
Do you think I should break the other pin in from the back? Maybe then I can take it out

>>17103209
no, since your drum is already fucked you might as well cut it in half with a cutting tool and buy a new one, they aren't that expensive

>>17103209
just try to figure out where your wheel cylinder (s) are and how big they are and.. try not to cut them
or heat them up a whole bunch
or take the bolts out you used to back the drum off and hit it with a hammer until if youre lucky it gets loose and you can use the adjusters properly

Wow helpful advice instead of shitposting. Gg /o/