Need help getting off a rounded bolt

>>16986809
Jb weld and a spider vice. Should come right out

>>16986820
I don't have a spider vise but I may try JB welding it to a socket

Take off your rad, you lazy cunt. or cut a slot with zip disc and flathead screwdriver

>>16986931
Also try hammering a smaller standard socket on and giving it a slow twist

>>16986931
>>16986956

I would expect I don't have a shop to do it in

I've tried both of those, can't fit a dremel into the space and there's no swing room for the hammer

>>16986956
Also try hitting it with some heat from small propane torch, previous retard probably put on loc-tite, I mean... He was retarded enough to buy a 4.7 ysee

>>16986977
Etch a slit for a screwdriver with a hacksaw blade or something

>>16986809
Stop being a cheap cunt, and break the water neck off, its plastic you pussy.

Then you won't have it in your way. They're not expensive. Jesus Christ you dingus.

If you don't wanna pull your rad, there is no helping you son. I'd pull the rad and drill the bolt out. Up to you my boy

>>16986809
Take a smaller bolt extractor and hammer it on with a mallet

>>16986977
You don't need a shop to pull the radiator, m'boy. It'll only take an extra hour to remove and it will make life easy

Where you located op, I'll come help you out if nearby, I'll even bring some beers

>>16987065
Also vice grips, gripped so hard it hurts your hands(yes use both) to close them

>>16987065
(And then I'll buttfuck you)

File: 1491094231219.jpg (363KB, 960x624px) Image search: [Google]

363KB, 960x624px

>>16987079
If his dick is feminine enough

>>16987087
Good old fashioned cornholing

>>16986995
Yeah that's the plan, I'm currently without wheels and the shop that sells the part is closed for the day, I'll leave it on for tonight, buy the part, get home and smash it I think

>>16987065
Calgary AB

>>16987041
My only fear with that is if the previous owner did work on the rad, what if I run into a another problematic bolt and fuck my self over even more.

>>16986995
I'm probably going this route

File: Screenshot_20170409-203721.png (2MB, 1440x2560px) Image search: [Google]

2MB, 1440x2560px

>>16987139
Then you also fix that, that's how a lot of car repairs go. You start one thing and end up fixing g 8 others. Also see you in 2 days

>>16987139
What a quitter

>>16987156
I'll fix it once the vehicle runs again, might as well get it running so I can get my parts then I'll swing by work and do anything I need to there.

>>16987156
That's a long drive for a slice of boy ass

>>16986809
Spray it with WD-40, then tap the bolt with a hammer. Get your vice grips, clamp on to the head and crank over and pray

>>16987242
I hit it with some PB every hour and just keep trying.

>>16987333
Put it back, start the truck up and warm it up for a minute. then take it apart quick and put an ice cube on the bolt and tap and spray it