how does this look for 200k /o?
Looks just fine, as it would.
Swap an LS into it
looks like a chrysler
the wiring looks cheap
I don't know anything about cars.
What am I looking at here?
well, for a change it seems like someone on /o/ is actually doing real work frequently
>>16979620
One side of an OHV V8 without the valve cover
>>16979614
nah 93 Ford Bronco with a 302
>>16979620
The only part removed from the engine is the top lid of it, the valve cover. Those are the rocker arms and valve springs. It is a 4-cylinder engine with pushrods... Or possibly one side of a V8.
>>16979638
well its not going to be very powerful, but it should run ok. the factory 5.0 was a DOG
>>16979634
>>16979648
Neato.
>>16979620
the rims
>>16979620
A blown head gasket
>>16979620
crankshift
>>16979663
yeah 185 hp is a serious let down out of a v8 but it will sound good and be decently reliable. 65 mph is already sketchy in a lifted bronco
>>16979730
how much lift? hope its not a lot, things get sketchy fast
>>16979743
I bought it with a 3 inch body lift, looks kinda dumb. Might get rid of it and install a 4 inch suspention lift . or I might just add 2 more inches of suspension. just want to clear 35s with room to articulate
>>16979778
leave the body lift and do 4 inches of suspension lift. Put 37's on and let them make their own clearance.
>>16979786
True. looks like the body lift was done in the 90s. Just waiting for the body to slide off the frame when I go up a hill one day
>>16979589
here's a pic of the truck. needs some attention to the body. Rear passenger fender was murdered by the previous owner. it's going to be beaten up anyways
>>16979589
looks good mine looked way worse on my 302 you should pull the rockers and inspect the pushrods and to reinstall just torque them back down to 20ftlbs
>>16979589
>>16979889
oh almost forgot go to the parts store or order some rubber and steel valve cover gaskets
>>16979898
yup did that, didn't have enough time to pull the rocker arms though.
>>16979908
i would def check them if your car ever ran into oil starvation they have a tendency to pyramid at the ends i would also replace pcv screen and valve in the back of the intake if its clogged youll blow all your seals out