Any advice lads?

File: IMG_20160419_211235.jpg (177KB, 1080x1080px) Image search: [Google]

177KB, 1080x1080px

>>15580063
Scrap it

>>15580063
I'm not pictured btw

>>15580065
Really?

>>15580071
Yeah. Its a shit car.

build wall

>>15580075
Aw

>>15580063

Keep the patina, don't paint it.

Also, keep the louvers.

>>15580115
Ignore the nocar.

RB26 swap.

>>15580386
Remember to upgrade the brakes if you upgrade the motor.
And for the love of god don't 'slam' it.

>>15580063
Ditch the bumpers, do one of several possible brake upgrades (there are guides all over the place), carb/Megasquirt it if the FI gives you any issue whatsoever. Shit's not worth the trouble.

Looks like you got a '77/'78 so the suspension's been nerfed. Eibach makes a spring kit that'll take care of it along with some new shocks.
You should also wire relays into the lighting circuits if they aren't already. I can't remember if they fixed that with the 280s.

>>15580368
Don't you dare take off the louvers OP

>>15580063
fix it up and drive back to your side of the wall

>>15580368
>>15581722
louvers are so tacky and ugly, they ruin the image of a clean car
>>15580386
>RB26 swap
kys bus rider

File: 20160731_215414.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

Op here guys
I've decided to remove the bumpers, keeping the louvers, drum to disc brake conversion, swapping the suspension, and dropping in a 280zx motor.

>>15580063
The KA24 is a dual cam variant of the 4-cylinder L series. If you take two KA heads and cut one down the center and cut the middle two cylinders out of the other, you get a dual cam L series head that RB cams bolt right onto. You don't have to worry about water passages or welding the sections together if you cut it right, everything goes up and back down for each individual cylinder.

Toyota 4-piston truck brakes marked S15W fit in the front with a bracket. My cousin had Altima disk brakes in the back of his, but I don't recall what he did to make them fit.

2" OD Bilstein strut inserts fit in your strut tubes, but you may have to cut a section out of the tube to shorten it.

There's a house I go by every now and then I always see a 300zx Turbo z31 parked kind of behind a bush. Should I look more into it?

>>15580071
>>15580075
Scrap the Jap.

>>15582711
No, just because people have a nice car on the lawn doesn't mean it's for sale fuck off.