Sitting at the muffler shop bored as all hell waiting to get

Just put two magnaflows on the GTO. Had it going headers to X pipe thenbstraight back before. Was hella loud. Now just a nice rumble.

>>14921835
My shit broke off from the downpipe so it's straight manifolds now, I'm going 2 inch downpipe into a thrush turbo into a driver side lake pipe then in front of the rear tire dump

File: 2016-04-23.jpg (257KB, 962x541px) Image search: [Google]

257KB, 962x541px

just got done pulling all of this and replacing it.

File: IMG_20160417_173748.jpg (3MB, 3948x2241px) Image search: [Google]

3MB, 3948x2241px

>>14921858
Nice. Shut looks mad rusty yo

Laid my bike down. Gotta fix the damage it caused.

>>14921872
She trashed?

File: 2016-04-23.jpg (1MB, 2048x1152px) Image search: [Google]

1MB, 2048x1152px

>>14921858
>>14921869

it was so terribly rotted

File: IMG_20160424_235028.jpg (120KB, 1440x802px) Image search: [Google]

120KB, 1440x802px

>>14921881
Christ. I had a Dakota v6 that had 400K Michigan miles on it.
Mfw
Mfw SC so no snow or salt

>>14921873
Not too bad. The overflow bottle is the only critical component I need to replace. I wanted to upload a pic but my shitty connection didn't want to cooperate.

File: DSCN0488.jpg (833KB, 2000x1500px) Image search: [Google]

833KB, 2000x1500px

I did this yesterday, but I only got the pics up today, so here we go!

Car's jacked up for reasons.

>>14921858
what is that accordion looking part

File: IMG_20160424_234847.jpg (101KB, 1440x794px) Image search: [Google]

101KB, 1440x794px

>>14921979
>Using jackstands
>>Not living dangerously
Come on anon-Sama~ it's like you enjoy living or something

File: DSCN0489.jpg (540KB, 2000x1500px) Image search: [Google]

540KB, 2000x1500px

>>14921989
Doesn't help that the car sits quite low, and is quite heavy at 3500 lbs.

Off comes the wheel for me to find that soaking the sway bar links in 1000000000 gallons of penetrating oil has done nothing.

File: DSCN0491.jpg (455KB, 2000x1500px) Image search: [Google]

455KB, 2000x1500px

The original plan was to try and use bolt cutters to get a bit of leverage and possibly keep the threaded bit from spinning around in the bolt, but there just isn't enough space to work with there. This is the top part, where the most space is present.

>>14921983
Muffler bearing

File: DSCN0498.jpg (406KB, 2000x1500px) Image search: [Google]

406KB, 2000x1500px

...and here's the bottom piece, where the control arm is basically exactly in the way. Looks like there's going to be an angle grinder in my future.

File: IMG_20160420_113659.jpg (151KB, 1440x783px) Image search: [Google]

151KB, 1440x783px

>>14922008
Tack weld the bolt to the frame then tap the welds with a chisel a few times. Make sure the weld is Piss hot and fast. It won't stick well

File: DSCN0499.jpg (557KB, 2000x1500px) Image search: [Google]

557KB, 2000x1500px

>>14922026
That's a shock, not the frame. I'm just going to grab a grinder this week and lop it off. Nothing of value shall be lost.

This is Saab's super-schnazzy battery cover. It, the battery, and some other stuff needed to be removed for this next job: motor mounts.

File: DSCN0500.jpg (724KB, 2000x1500px) Image search: [Google]

724KB, 2000x1500px

Dusty dusty battery, but the terminals are in nice shape. Strangely, this one has a different shape than my old 9-5, where they jutted out flat rather than at an angle like this. I can only assume this is the original design.

>>14922026
Which muffler shop OP?

Tfw work at muffler shop in SC

File: DSCN0505.jpg (595KB, 2000x1500px) Image search: [Google]

595KB, 2000x1500px

Deceptively, this bolt came out easily. The battery holder thing, however, had been installed upside-down by somebody at some point in this car's history. It cracked upon turning the bolt, thankfully staying intact enough to be used again.

File: DSCN0506.jpg (671KB, 2000x1500px) Image search: [Google]

671KB, 2000x1500px

With the battery out of the way, a few fuseboxes had to be unbolted and one needed to be pulled aside. Some videos show a short bungee latching to the little framepiece that holds the main harness plug, but that means putting some strain on the brake reservoir, which is not desirable in the least, so I hooked it around the hood framepiece. The battery compartment has this very cool drain that would've been nice to have in my Taurus when it was leaking coolant every which way and collecting in the battery compartment. You can also see, just behind the coolant hose, the motor-transmission mount in question.

File: Snapchat-5388422234237403720.jpg (581KB, 1080x1920px) Image search: [Google]

581KB, 1080x1920px

>>14922082
Tfw this came by.

PT cruiser, rusted to all hell with a ratchet strap holding up the tank

I wonder if this was a factory option

File: DSCN0507.jpg (502KB, 2000x1500px) Image search: [Google]

502KB, 2000x1500px

And here's a better view of the mount. These bolts were not nearly as corroded in place as the links, probably because the battery and other gubbins are in the way of weather and rain and sleet and salt and stuff.

File: DSCN0511.jpg (751KB, 2000x1500px) Image search: [Google]

751KB, 2000x1500px

>>14922110
On a PT Cruiser? Not sure if that was the case, but I have seen a Neon with a similar arrangement. Just before the framepiece he had secured the tie-down to fell off, of course.

Old mount's on the left, new one's on the right. The old one had not only collapsed, it was on the verge of breaking apart into three pieces, which I've heard of happening on other 9-5s. The transmission had to get jacked to the point of the car lifting slightly just to get the thread in for that nut in the middle to go on.

>>14922082
Brad's muffler in luggoff
Where you at?

File: DSCN0512.jpg (656KB, 2000x1500px) Image search: [Google]

656KB, 2000x1500px

This was the next side to attack, the big main motor mount holding the aluminum brace in place. This one was the one that led me to realizing how bad the motor mounts were, because I could feel it move back and forth a couple of months ago when I was changing the serp belt. Straightforward stuff, just unbolt and away it comes.

File: DSCN0514.jpg (680KB, 2000x1500px) Image search: [Google]

680KB, 2000x1500px

New one on the left, old one on the right. Again, the difference is astounding. This mount is kind of like a primitive version of Citroën's and Mercedes' suspension spheres, except there's no fluid component, it's just an air bladder holding a hard rubber piece with a thread on it. The old mount's bladder had collapsed, so it could just wiggle back and forth.

File: DSCN0518.jpg (621KB, 2000x1500px) Image search: [Google]

621KB, 2000x1500px

Even though I didn't get the sway bar links done, it was still a great day since one of the biggest annoyances on the car had finally been fixed. The difference is visible, too: it sits a full inch or more higher than it used to, and the whole car rides and drives much, much more smoothly than before.

File: Silver Aero Engine.jpg (44KB, 600x450px) Image search: [Google]

44KB, 600x450px

This is what the engine used to look like, for reference. Not sure how much of the difference you can see, but it's definitely sitting a lot better now.

File: IMG_20160425_114342.jpg (2MB, 2952x3897px) Image search: [Google]

2MB, 2952x3897px

Oh Jesus boys they got me good
Someone done boxed the frame

File: IMG_20160425_114331.jpg (3MB, 2952x3988px) Image search: [Google]

3MB, 2952x3988px

Jesus the rust

>>14922191
Gadzooks, it's Martian soil at this point.

File: IMG_20160425_115547.jpg (3MB, 4298x2952px) Image search: [Google]

3MB, 4298x2952px

>>14922216
I hate northern cars

>>14921814

On what type of car would you generally recommend an exhaust upgrade? Say up to 3" diameter piping, mandrell bent, etc

Say I get a Celica GTS, will it make it sound nicer? I don't want the fart can crap but would like a nicer note when I accelerate.

Also how much does a job like that run at a shop? I know sometimes you can get bolt on kits so you don't have to weld and can do it at home.

>>14921814
Trying to decide how much I want to spend on a water filtration system for washing my car. I currently have no water softener or anything and the water from my garden hose leaves horrible water spots after rinsing. Even if I try to dry with a shammy it has dreadful streaks that take forever to get out with quick detailer and a microfiber towel. I can't decide if I just want to spend $40 or so on a cheap filter that mounts on the end of the hose, or if I want to spend more like $150 and get the nice wall mounted dual filtration system and be done with it.

>>14922110
>crush bent piping

File: aaa.jpg (82KB, 2048x1536px) Image search: [Google]

82KB, 2048x1536px

>>14922191

Jesus your FACE AHAHAHHAHAHHA *snort* AHAHAHAH

>>14921979
>boat shoes
>with socks

please tell me you don't do this in public

File: disgust.jpg (32KB, 620x400px) Image search: [Google]

32KB, 620x400px

>saab autists derail the thread again

File: 1461542894700.jpg (51KB, 960x852px) Image search: [Google]

51KB, 960x852px

>>14922566

>>14922473
Literally save your shekels and replace the muffler with a different brand. If you want it louder get rid of the cats. All that other shit is for power and full exhaust from the motor back sits 1500 to 5K

File: image.jpg (948KB, 2048x1536px) Image search: [Google]

948KB, 2048x1536px

Replaced a lower control arm

>>14922138
Muffler shop of Columbia. My friends used to go to Brad all the time until I got the job at the muffler shop.

>>14922832

Pricey indeed. Is there a muffler that isn't a fart can or looks retarded? Cat removal is okay in my state as well so that's an option.
Also I wouldn't mind doing the whole shebang for more power but not for more than 1500.

>>14921814
Oil filter and oil turned up today. Change happens at the weekend.
I think 10L of oil was too much, but I figure it's better to have some left over than to end up not having enough.

>>14923247
Is that on hewjee/huger Street?

File: image.jpg (856KB, 2589x1768px) Image search: [Google]

856KB, 2589x1768px

>>14921814
Looking for some dank wheels and coilovers so I can drop this bitch VIP style

>>14923572
Yup that's the one. I'm usually there from 2-5 weekdays. My car is a green SC300

>>14923806
Oh word. Your owner shit talked me to my face 5 years ago so I never went back. Fuck that douche wagon.

File: 13029454_615502298615622_4516610379071787301_o.jpg (416KB, 2048x1365px) Image search: [Google]

416KB, 2048x1365px

>>14922138
I used to go to Brads Mufflers, now I only go to Muffler shop of Cola. Seen me around?

I discovered a small hole in my rear driver side tire today. I got it patched for free.

Besides that, still waiting on a couple shipments. Just some rice stuff.