Post your engine bays. Pic related

File: IMG_20150404_133000.jpg (2MB, 2448x3264px) Image search: [Google]

2MB, 2448x3264px

Weed wacker engine

File: shitbox engine.jpg (645KB, 1600x900px) Image search: [Google]

645KB, 1600x900px

>>14090325
1v1 me on the tooj

File: 20140413_133749_HDR.jpg (2MB, 2448x1836px) Image search: [Google]

2MB, 2448x1836px

>>14090396
missin 2 cylinders boy

>>14090467
>those plug wires
looks cool but they will probably short once he hits a pot hole

>>14090484
Its barbed wire, it's really rigid.
He was daring people to touch one while it was running.

>>14090509
Yes true, it's rigid. I don't think I would shock someone because they are grounded to the ground you know ? Maybe if they were touching the car

File: 20150902_191159.jpg (298KB, 1363x767px) Image search: [Google]

298KB, 1363x767px

As much as I love the car, the engine bay is ugly as fuck.

File: 20151208_215217.jpg (960KB, 2048x1152px) Image search: [Google]

960KB, 2048x1152px

How to clean her up /o/?

I had an oil leak from the top side of my engine. Timing chain collar support screw came loose to be exact.

Cannot see it obviously, but it's pretty grimy from the oil.

>>14090586
GUNK

File: 20151216_160336.jpg (2MB, 3264x1836px) Image search: [Google]

2MB, 3264x1836px

muh wrinkle finish

>>14090668
that is one clean engine bay good job, how much of that is replacement parts and how much is elbow grease

>>14090586
that hot air intake kek

>>14090837
all parts are original except for the spark plug wires and I painted the valvecover. everything else I cleaned with degreaser (simple green), engine bay cleaning foam and windex. thanks for the compliment man

>>14090975
you got a squirrel on your engine

File: resize 01.jpg (614KB, 1920x1280px) Image search: [Google]

614KB, 1920x1280px

Have plenty of work still ahead of me.

File: 20141213_100416.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>14090191
Booya.

>>14091339
>>14090975
can someone please explain the benefit of warping your headers in heat tape?

>>14091360
Keeps bay temps down, far better then the heat shield itself does.

I believe most tests put it around 150F cooler overall.

>>14091371
does it provide any other improvements other than temp and making it look like a "racecar"

File: rx7Untihahhahshasastled.jpg (212KB, 595x587px) Image search: [Google]

212KB, 595x587px

Single turbo FD

>TFW 30 year old key snapped off in the decklid.
>TFW your car is hugely unreliable, and you can't get to the engine or battery until the new locks you ordered arrived.

>>14091381
I'm not sure what sort of answer you want here. but since you can't figure it out.

Heat is bad for air intake, lowering the temps means cooler air inside. It also means all components in the bay are at lower stress for heat temps. meaning possible longer life.

It's an all around win situation as long as you have stainless steel headers.

>>14091401
why stainless can they cause rust?

>>14091408
Yeh itll rust out headers really fast.

>>14091408
If you use something like mild steel it will cause surface rust, pretty much you take the lifetime of your headers down from say 12 years down to 10 years before if you race them.

Most of the complaints people give about "wrap ruins your exhaust" is people thinking surface rust is bad.

>>14091416
>really fast
no it doesn't, it speeds up the process, but it's no where near "fast".

>>14091420
thanks man super helpful just starting to get into modding cars and such was wondering about this for a while

>>14091420
To further this, The rust thing comes because water can get trapped between the wrap and the pipe. place it rains a lot of if you wash your bay.

If you live in a dry place it won't effect your car for shit.

If you live in a place it snows, well you are fucked either way.

>>14091432
No problem, just give this sort of thing a google search and read a bunch on anything you might have. There is a lot of websites that love to just spout off none-sense so you might have to dig to get your answer.

>>14091441
yea ive looked but it all seams too be a bunch of misguided bullshit that isn't rely backed by any facts i just wasn't sure what to belive

File: DSC_0122.jpg (3MB, 3840x2160px) Image search: [Google]

3MB, 3840x2160px

Sure.

>tfw sharing months old pictures because storage

File: bay.jpg (80KB, 960x720px) Image search: [Google]

80KB, 960x720px

long time ago

File: 1.jpg (256KB, 1358x1080px) Image search: [Google]

256KB, 1358x1080px

One of the most hated cars on /o/ reporting in.

will snap photo in the morning but i feel so sorry for all of you people i can stand in my engine bay with a 350 small block

File: Screenshot_2015-12-22-02-16-23~2.jpg (148KB, 1440x1468px) Image search: [Google]

148KB, 1440x1468px

Muh old engun

File: IMG_20151018_233425.jpg (1MB, 2304x2304px) Image search: [Google]

1MB, 2304x2304px

Muh current project

File: 20150828_145709_HDR.jpg (3MB, 4160x2340px) Image search: [Google]

3MB, 4160x2340px

Muh about to be new daily

File: 20150516_211606_resized.jpg (2MB, 3984x2241px) Image search: [Google]

2MB, 3984x2241px

One word; plastics

>>14091591
could you hear that?

>>14091607
Bought it from a guy that said it had a knock. I found the knock. If he still has the youtube video up I'll try to link it in a few.

>>14091348
5th Gen? Also clean as fuck

File: IMG_20151130_003214.jpg (3MB, 4160x3120px) Image search: [Google]

3MB, 4160x3120px

Who the fuck else /LC2/ here?

File: lSkq42u.jpg (235KB, 1440x2560px) Image search: [Google]

235KB, 1440x2560px

>>14091607
>>14091613
Link to knock video:
https://www.youtube.com/watch?v=keW9P5futqA
I bought the complete engine with complete wiring harness and computer, with all of the accessories still attached for $275

>>14091649
damn thats louder than I thought it would be.
did you bore gauge the mains are they still square?

dont know anything about that engine, seems like pretty good price though with the partial loom and accessories all there

>>14090558
It will pop the shit out of you son. Go pull a boot, stick your finger in >>14091591
and have someone crank it.

>>14091666
I haven't really gotten to the mains yet. The engine has been rebuilt before and has .020 over pistons along with the journals being .010 under. I haven't taken the crank out yet to measure the mains.
The thing that I've found that's kinda weird is that the top ring has a ring gap of .024 which I've read is around the right size, but the middle ring is only .010 which is supposedly way to small from what I've read.

>>14091688
yea it can break lands if its too small and dig into the bore
seems like a lame oversight. corner cutter builder or what might explain why it bent a rod.

File: 1450770869139-1760348.jpg (973KB, 2048x1536px) Image search: [Google]

973KB, 2048x1536px

>>14091666
>>14091716
The bearing took the beatng while the crank journal still seemed to be in great shape.
All of the cylinders still look to be in great shape also with fairly new hone marks in them from whoever rebuilt it. I'm still going to take out all of the other pistons to resize all of the rings since I also plan to turbo the engine with a diesel turbo I got and rebuilt from a junkyard.

File: 0309131305.jpg (457KB, 960x1280px) Image search: [Google]

457KB, 960x1280px

Yeah, it's a hemi.

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

What do I win for cleanest bay

>>14091815
Hopefully an engine worth putting in one
>zing

>>14091822
Well luckily for me the ABA is an awesome, reliable engine.

File: 11194641_10206899202703203_1138110002254304640_o.jpg (258KB, 2048x1152px) Image search: [Google]

258KB, 2048x1152px

>>14090191
sadly not done yet

>>14091849
PNT manifold? I knew someone who had one with the 90mm throttle body on an rb20, killed power below 5,500 but made pretty good gains above that

>>14091845
8v and 115hp, awesome

File: WP_20140423_14_53_02_Pro.jpg (1MB, 3072x1728px) Image search: [Google]

1MB, 3072x1728px

Intercooled 5 speed manual

>>14091889
Bread or gtfo

File: myengine.jpg (132KB, 500x667px) Image search: [Google]

132KB, 500x667px

do I win for smallest displacement? 1.6 litres of fury

File: image.jpg (2MB, 4032x3024px) Image search: [Google]

2MB, 4032x3024px

>>14091892
Here's 1 of it jacked up right now m8

>>14091931
There's smaller here. I've seen kei cars and 3cylinder geos. You may have the least hp though.
>>14091845
I was just teasing hence the
>zing

>>14091944
>still gluten free

File: image.jpg (1MB, 4032x3024px) Image search: [Google]

1MB, 4032x3024px

>>14091960
I'm in the middle of working on it, not gonna run and timestamp. Here's 1 final pic from the inside.

>>14090191
nice fiero m8

>>14091944
Aren't you the US Marine who shot himself in the foot?

>>14091974
No I'm the Aussie with the 33 running a 34 n1 engine

File: 20151219_163330.jpg (4MB, 4160x2340px) Image search: [Google]

4MB, 4160x2340px

>>14091931
I think I win. 0.9 liter with 27 horsepower.

>>14091980
that is fuckin sweet. got the car to go with it?

>>14091993
I don't have a picture of the car, but its a '39 Austin 8 convertible.

>>14091889
Get much shuffle with the hardpiping? My friend eventually went back to rubber because he couldn't get his 2530's to stop shuffling

>>14092019
Everything's solid as a rock

>>14091870
In a 1700lb car :)

File: 20151015_070751.jpg (828KB, 2048x1152px) Image search: [Google]

828KB, 2048x1152px

S M O O T H
M
O
O
T
H

File: 20151026_213655.jpg (3MB, 5312x2988px) Image search: [Google]

3MB, 5312x2988px

Vroom vroom VROOOOM

>>14090567
mean machine, sexy

File: 19543a6n4eg.jpg (104KB, 640x425px) Image search: [Google]

104KB, 640x425px

Not my photo but identical configuration except I've cut all the EGR cancer off.

Also obligatory sound sample: https://www.youtube.com/watch?v=MlIQ-maRP8w

File: _IMG3529.jpg (2MB, 4928x3264px) Image search: [Google]

2MB, 4928x3264px

>>14090354
740 bro

>>14090821
muh nigga!

>>14091381
No. Why would it need to? It's all about trying to keep your engine compartment cool after you added several feet of exhaust pipe to it in the form of headers.

File: Sunfire Engine.jpg (390KB, 1746x979px) Image search: [Google]

390KB, 1746x979px

Contributing with my rust finished master break cylinder. (No idea why it's rusted like that.)

>>14093201
Every time I see a picture of a Civic's engine bay, I miss my 93 Civic EX.