https://www.youtube.com/watch?v=TW0njs5npY4
Because I'm noguns, duh.
>posting "gasiraq:heilhitlerheilhitler" videos
Ishiggdydfddygydiggy
Why aren't you out there collecting range scraps?
https://www.youtube.com/watch?v=gscXQJRrdcI
>>35143862
Who says I don't?
I cast for:
7.62x25 (also powder coat these)
58 cal muzzle loader
577/450
43 Mauser
I am currently looking for a 43 Spanish mold but I am cheap and don't want to pay full price.
How do you size your cast bullets? I mostly use a Lyman 450 Lubrisizier myself.
>>35143862
I have not invested the money into it yet. Right now saving up for the wicked edge.
>>35143901
>7.62x25 (also powder coat these)
How much of a difference is the powder coating making? Do it prevent leading your barrel? Isn't it minimal with hard casting?
>>35143917
You can push powder coated bullets a lot harder than you can push traditional lube groove designs.
Even with hard casting, I ran into leading issues with my 7.62x25 (despite all other attempts). After powder coating, I have not run into any and I push them even hotter than traditional lubing (see just over 1200fps for traditional vs close to 1600fps for powder coat).
>>35143862
Looks like a comfy hobby
https://www.youtube.com/watch?v=rPdRkaU_oFg
Because no one will make me a custom mold.
because lead will foul polygonal barrels
>>35144262
There are many places that will make custom molds.
AccurateMolds .com is based on nothing but custom molds. Lee will also make custom molds. There are tons of places that will make custom molds. The catch is they want custom mold prices.
>>35144396
Tried em. No one is willing to make one .90" diameter.
>>35144409
Try moose molds. They initially started by making molds for muzzle loading competitions and might be willing to make a mold that big, if they are not too busy to do custom work.
What do you need a mold that large in diameter for?
>>35143862
because I ran out of scrap lead
>>35143882
wut
>>35144438
Reasons
>>35144461
bruh
>time & money reloading
>bullets leading up my barrel
>getting lead poisoning
no thank you
>>35144461
>Reasons
Good Reasons
Not too crazy about lead buildup in my body. Might end up with a daughter who's crazy like Lena Miculek.
>>35144475
>time & money reloading
Get effectively free lead from range scrap making the most expensive material part effectively free. Use a progressive or turret press to load hundreds of rounds per hour.
>bullets leading up my barrel
Powder coat. Easy and takes a couple of minutes, most of which is just letting it sit in a toaster oven.
>getting lead poisoning
Not if you do it right. If you do it wrong, we are all a little mad here anyway.
>>35144475
>getting lead poisoning
>>35144512
That's colloidal silver doe
Also super neat and I'm surprised its not more popular in the bodymod community
>>35143862
because i'm enough of a retard without any lead poisoning.
>>35144501
just wear gloves
like nigga just put something on to cover your hands
>>35143862
I am, I'm just doing it the cheap sunabitch way.
https://www.youtube.com/watch?v=__NWTi2HUMI
>>35144458
He's being a retard, pay him no mind.
>>35144475
>getting lead poisoning
Wear a respirator when casting and wash your hands just in case.
>>35143862
Good question, why ain't I? Same for reloading, need to get into that.
>>35144512
>Not taking silver to the point of turning blue
>Not ascending
>Not beating every virus in the ass with your immune system boosted to max strength by silver
>>35143862
Why arent you mining zinc, copper, and lead yourself to make the entire bullet from scratch? You'll save enen more money this way and you'll no longer be dependent on others.
Dont own several metal mines? Then maybe shooting isnt the right hobby for you.
>>35143862
I live in an apartment.
>>35144849
I grinned.
because i only shoot common calibers and have no reason to make my own ammo.
>>35144832
>tfw allergic to silver
>tfw was hospitalized after doctors prescribed silver nitrate and stuffed an open wound with it
>>35144869
> needing a prescription for silver nitrate
>>35144461
>>35144461
ebin
You're all very, very gay..
Wow 140 bucks for a bullet die for 4bore.
http://www.castbulletengineering.com.au/bullet-moulds/shotgun/4-bore
>>35144461
Do you have a 45mm Glock and Wesson too? Both guns are good for hunting rat swarms.
>>35145021
And?
>>35145021
>>35145022
2big, ks23 is 6.27ga American
>>35144461
Here's a ebay thing for a .875 round ball mold
http://www.ebay.com/itm/VINTAGE-LARGE-ROUND-BALL-BULLET-MOLD-875/182735660286?_trksid=p2485497.m4902.l9144
it ended though
might be able to buy it off the bidder ?
>>35144501
whats wrong with lena?
>>35144409
>No one is willing to make one .90" diameter.
the dropdown list on the custom mold diameter goes up to .939 though?
>>35144461
jesus
you gonna siege a castle atop an elephant with that thing?
>>35144409
you could try using a socket wrench?
15mm one makes 12ga slugs
>>35145405
They either don't want to make me a foster mold or i haven't heard back from them, pinged like the top 20.search results.
>>35145451
can't you make the mold yourself ?
you can first print it in 3d then use argile to make a mold of the plastic one and then create it
>>35145451
My old shop teacher made molds for his cannon
He died though : (
Because I don't shoot garbage rounds and I don't want lead poisoning?
>>35144461
BFG-1 or something? You hunting demons and space marines?
>>35145475
I'd rather machine something desu, but that's an option as well
>>35145660
Yep
Because my actual adult job gives me too much money and not enough time to worry about poorfag shit like scrimping for literal cents
>>35146832
> 2017
> not being a NEET
Chillax, it's a hobby more than anything, I'm sure most casters could afford to buy rounds if they wanted too
Scared of squib loads
>>35146832
This, plus high likelihood of additional lead exposure. No amount of money is worth your health.
>>35143862
If you touch lead with your skin, it will be absorbed into your body and cause you some setious problem in the future
>>35147610
Not unless it's your day job and even then, you just need to wear adequate protection
>>35143862
my time is worth more than that
>>35147712
It's like gold panning, a hobby with marginal financial incentives. It's only a necessity if you have a firearm that shoots special snowflake rounds.
https://www.youtube.com/watch?v=b37y_x3STTY
https://www.youtube.com/watch?v=fu2fbizruoI
Powder coated casted bullets look pretty aesthetic though.
>>35145451
Just go to your nearest local machine shop jeez.
>>35147712
It really is. If I did reload, which I have considered if I pick up something like a 45LC revolver, I'd still buy the bullets not cast my own.
>>35144461
Kjaskaar?
>>35147610
Bullshit. Lead particles are to large to penetrate your skin barrier. Just do not suck on it
>>35147840
No I don't post on 4chan
>>35147790
>social interaction
Ehhhhhh
>>35147847
Yeah, i put everything in my mouth like a 2 year old so that won't work. Found myself sucking on an extra 10/22 bolt handle/guide rod/recoil spring assembly the other day. Luckily I took it out of the gun before I ever fired it.
>>35143862
Tin is expensive, and it isn't sensible to buy a ton or two until after I have built my dream home.
>>35145403
Left her husband for some dude with no hands.
>>35144461
Is that a TOZ-123?
>>35148582
Yup
>>35145567
>No funz doesn't realize that home loads are more consistent and accurate.
Why do gunlets even come here?
>>35148582
Fancy
>>35149936
That makes my wrist hurt just looking at it.
>>35145021
don't make me suck your dick
>>35143862
Because can't use lead wheel weights here now and I can afford to buy lead for my bp shit online nowadays
>>35150001
You can easily recover several pounds of range scraps in less than half an hour
>>35149936
> https://en.wikipedia.org/wiki/KS-23
> The KS-23 was designed in the 1970s for suppressing prison riots.
It was designed to look intimidating
>>35143862
Is lead roof flashing good for musket balls? Post-Irma roof replacements means access to tons of the stuff for next to nothing, and I have a hankering to buy a percussion rifle.
i ain't got no source for cheap lead
>>35150343
Yes. Different types of lead have varying degrees of hardness and are more suitable to different applications
https://www.youtube.com/watch?v=EBYFVLUEppk
>>35150395
https://www.youtube.com/watch?v=Lkw5UotuRbA
>>35143862
Cause I'm a poor fag
>>35143862
I thought i was the only person that melted down wheel weights
>>35143886
>fortune cookie 45lc
The motherfucking Mr. Miyagi of bullet casting.
>>35144461
>4 Guage
Nice try
> In one of his first acts as the nation’s new Interior Secretary, Ryan Zinke overturned one of the Obama Administration’s final acts.
> The ban on lead ammunition and fishing tackle was enacted the day before President Obama left office
> It’s unclear whether a 2013 state ban on lead ammunition will be affected by Zinke’s order. California’s law phases in rules that, by 2019, will prohibit lead ammunition for hunting all birds and mammals anywhere in the state, including on federal lands.
Commifornia was a mistake
>>35143862
>why
Casting lead bullets is for retards, that's why. What the fuck, do you think I'm shooting black powder here?
Talk to me when you're turning your own bullets out of brass.
>>35144262
my dad used to cast sinkers all the time, he also made his own molds out of plaster of paris then got a foundry to sand cast the copy
something you could potentially look at doing
>>35152227
Hard casted bullets are harder than your FMJ rounds
https://www.youtube.com/watch?v=C2aQpVKiCN8
>>35143862
Because I value my health more than saving a few bucks on ammo. Lead poisoning is no joke.
>>35144869
>Being a werewolf.
>>35144512
Is that Papa Smurf?
>>35144461
Damn
https://www.youtube.com/watch?v=YQhIVrIapO8
>>35152688
Don't be silly. I'm not a werewolf nor do they exist.
>>35152731
nice try, skinwalker
>>35152740
Werewolves aren't skinwalkers you uncultured ponce. One is a group of filthy savage natives and the other isn't, and doesn't exist.
>>35152749
It takes one to know one you rabid oversized wolf.
>>35151347
> The motherfucking Mr. Miyagi of bullet casting.
Pretty much
https://www.youtube.com/watch?v=ru6hhAVn118