Pros vs cons.
Go.
Do your own research.
one is 1 1/2" shorter than the other.
>>35104713
/thread
>>35104705
C O M P L Y
O
M
P
L
Y
So fucking helpful.
>>35104741
Don't ask questions that have been thoroughly examined in dozens if not hundreds of articles, blogs, forums, etc. Learn to fucking google you fucking potato.
>>35104741
Glad you recognize the help we're giving you
>>35104705
>both same length required by law
>one has 16" of rifling, the other has 14.5"
do the math retard
they're both the same length but you're going to get lower velocity out of the 14.5
>>35106327
they are both the same length
>16" of rifling= 14.5" of rifling
W E W
E
W
>>35106339
are you retarded?
he said 14.5 pinned and welded
you have to have a 16 inch total length of your barrel otherwise it's an SBR or a pistol
that means it's a 14.5 in barrel with a 2 inch flash hider welded to it to make a 16.5 inch total length, but only 14.5 in of it is useful barrel.
a 16 inch barrel has rifling all the way through
longer gas seal = higher velocity
>>35106327
>one has 16" of rifling, the other has 14.5"
No. Barrel length is measured from the breech face to the muzzle. A 16.1" .223R/5.56N barrel will have about 14.2" of rifling.
>>35106327
>do the math retard
>>35106376
So thus a 14.5 in barrel will have about 12.6 in of rifling
>>35104705
The one on the right.
>>35106382
Yes
>>35106395
so you will get lower velocity and arguably less stabilization out of a 14.5 pinned and welded barrel without any increase in utility based on shorter length because you still have to have an overall barrel length of 16 inches by law
>>35106410
>>35104705
14.5:
-Mil issue M4 BDCs (like the ACOG) are generally calibrated for 14.5" barrel ballistics
-Slightly shorter rifle
-Negligibly slower muzzle velocity
-You have to have a muzzle device pinned to bypass NFA
-Looks better in most cases
16:
-Negligibly higher muzzle velocity
-Slightly longer rifle
-Looks goofy when making an M4gery
-You don't have to pin a muzzle device
-Potentially more reliable when using shitty/not-so-hot ammo with mid-length gas
Inb4 some retard claims they are the same length. A 16" is 16" of barrel without a muzzle device. A 14.5" is 16" with a pinned A2X or FSC556, among some other muzzle devices.
Other people are right though, if you need an entire thread dedicated to this subject you are probably retarded.