(h,k) thread

File: 12200761_10153657996374892_102144973_n.jpg (104KB, 540x960px) Image search: [Google]

104KB, 540x960px

>>34932928
Is swiss allowed?

>>34933000
No.

The magazine deal running right now is crazy tempting. I'm happy with my P2000, now ruin that and convince me to blow ~800 on a LEM P30.

File: th-1.jpg (6KB, 267x182px) Image search: [Google]

6KB, 267x182px

>>34932928

Here's your parabola.

>>34933000
Neither are wrong-handed faggots

File: sigkilo2400.png (2MB, 1283x942px) Image search: [Google]

2MB, 1283x942px

>>34932928
M-my ancestors were German, can I play?

File: dmen.png (9KB, 250x194px) Image search: [Google]

9KB, 250x194px

>>34933157
Hey can I bring my friend, He's a bit demented

File: IMG_20170818_115241.jpg (2MB, 2340x4160px) Image search: [Google]

2MB, 2340x4160px

>>34933200
>inherently ambi handgats
Even wrong-handed proles are welcome under the HK banner.

File: pepdumb.jpg (9KB, 238x192px) Image search: [Google]

9KB, 238x192px

>>34933334
Only if you promise not to drop anything.

File: USPExp9.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

hello friends

File: IMG_20170821_184209.jpg (2MB, 4160x2340px) Image search: [Google]

2MB, 4160x2340px

Post elderly companions who found good homes

File: Untitled.gif (393KB, 749x1287px) Image search: [Google]

393KB, 749x1287px

>>34932928
What is the proper name for these pins? the ones that are circled in my picture? Anyway, I got a little bit too much oil in the firing pin assemble block on my p2k, so I had to take out the firing pin, and the etc. [~rest of the springs/other parts.] I used a 1/4 punch or 1/8 punch and rubber mallet, do not remember. After I reinstalled everything, I used the punch and mallet to put those pins back into place. Is there a certain depth or measurement the pins should go back into? Does it matter which side you punch those pins out to begin with?

>>34934981
Pretty sure those are called roll pins.

Don't quote me on this, but I don't think there's a side they need to go in/come out. As far as depth, I think that looks close to factory.

>>34934981

rollpins
don't think there's a particular depth/measurement
took out/put back in same kind of pin when putting larger mag release on the USP Expert

>>34935063
>>34935072
thxs, also forgive me autism, but the coating or finish inside the crevasse/hole of the pins got scratched off by me gently tapping out the roll pins with the punch. :( should i worry about minor rust? or take lithium and lobotomize myself?

>>34935103
Why not take CLR and do both?

>>34935103
It's nitrided, it's not going to rust. The black part is just for looks.

>>34935103
>>34935121
Also no, it shouldn't be a big problem unless you store your best friend in a swamp for a month

>>34935072
I'm looking to do a longer mag release for my P2000; you used the HK45c one, right?

>>34935148

ordered it from hkparts but yeah it's the same mag release as my 45/C

>>34935333
Wait, on a USP? Doesn't the release have a metal tooth? How are your mags holding up?

File: 1503177809654m.jpg (133KB, 1024x562px) Image search: [Google]

133KB, 1024x562px

Wunderpistol posting.

>>34935741

mags are fine

File: Where_it_belongs.jpg (2MB, 1520x2688px) Image search: [Google]

2MB, 1520x2688px

oc

File: how did you fuck that up.webm (3MB, 900x486px) Image search: [Google]

3MB, 900x486px

>order HK USP 45 Elite last week
>shipped Thursday
>tracking said delivery on the 22nd
>plan range trip for the 23rd
>check tracking today
>package delayed a day
>delivery is now on the 23rd

Fucking UPS.

>>34936083
literally watching A Dangerous Method right now, I love Cronenberg movies, HoV is one of his best

also fuck UPS damn box nazis

but congrats on the Elite, I want one. 9 or 45

>HOW do you FUCK THAT UP

>>34936128

sry duh it's a 45. hellyeah

File: 20170817_153100-2930x2194.jpg (2MB, 2930x2194px) Image search: [Google]

2MB, 2930x2194px

>>34936083
>Order 14lb recoil spring and GG&G adapter
>Supposed to be here last Thursday
>UPS transfers package to USPS for final delivery
>Still no box

Fuck you too UPS, fuck you too.

File: 20170628_100726.jpg (3MB, 4160x2080px) Image search: [Google]

3MB, 4160x2080px

Hello fellow Kochsuckers.

File: 20170816_035237-2512x1881.jpg (2MB, 2512x1881px) Image search: [Google]

2MB, 2512x1881px

>>34936083
>HK USP 45 Elite
Niiiiice, I handled an Expert in the store Saturday, fucking sexy.

>>34936167
How much did that run you?

File: 20170721_062129-2077x1569.jpg (761KB, 2077x1569px) Image search: [Google]

761KB, 2077x1569px

>>34934917
>elderly companions
1995, and still protecting people

>>34936187
>>34936206

I have Mk23, 45T/CT, USP Expert, a P30SK and an SP5K even and I still want a USP 45 so damn bad it's driving me crazy. I don't like to buy online but I may end up having to

>>34936221
The USP45 fits my hand better than any other pustol I own it's fantastic. I just shot a steel challenge match with it and loved every second.

File: 1488856540622.gif (2MB, 217x217px) Image search: [Google]

2MB, 217x217px

>>34936302

Is the USP .45 more of an operator gun than the USP .40?

>>34936354
It's a baby Mk. 23
Also
>.40

>>34936354
Yes, because 230gr .45 super slamming into someone's face at 1150fps will operate like a plastic surgeon with a jackhammer.

>>34936187
I found it in a pawn shop for $1,100. Almost shit when I saw the price.

>>34936792
Oh fuck you, I hate you so much right now

>>34936914
I've never been as blessed in my life.

>>34936996
Did you save an old ladies drowning dog after helping her cross the street or something? Fucking cashed in some karma with that one.

File: IMG_0310.jpg (518KB, 1536x2048px) Image search: [Google]

518KB, 1536x2048px

USP45 and UTL on a TSA xray

File: 20170822_034859-2416x1731.jpg (1MB, 2416x1731px) Image search: [Google]

1MB, 2416x1731px

>>34936159
Aaaaaaaaaaaand LEM

Is Koch pronounced like "Cock", "Coke", or "Coach"? Asking for a friend

File: pT0LGZL.jpg (522KB, 1920x1281px) Image search: [Google]

522KB, 1920x1281px

>>34936083 here.

I wrote that last night before heading off to bed. I actually ordered an Expert, not an Elite, and I checked tracking this morning and its actually out for delivery. Now to play the "waiting for UPS to deliver and the FFL to call me" game.

>>34939760
Depends on the country of origin. HK USA says its pronounced like Coke while the German version is pronounced like loch with a K (or Cock with a less harsh CK and a more CH ending).

>>34939760
>Coke
So says the official H&K tutorial

>>34939760
It's spelled like it's "cock," but it should be said "coke," but the "ke" is pronounced "phlegm."

That's how you getting the official version.

File: 20170822_120026.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

All my krautshit

>>34940950
so... is that full auto?

>>34941457
most likely not. surplus metal lowers still have fun switch label on them.

File: images.duckduckgo.com.jpg (112KB, 650x522px) Image search: [Google]

112KB, 650x522px

>>34939924
>pronounced "phlegm."
just like Achmed

File: IMG_20170816_145310.jpg (161KB, 1280x720px) Image search: [Google]

161KB, 1280x720px

>>34936206
Pic related is a '93 USP9. I cleaned it and left it alone for a month or two after I got it and some rust blooms popped up on the part of the barrel that locks into the election port.

Needless to say, I'm taking better care of her now.

File: USPTac45.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

YOU GUYS I'm so happy went to one of the LGSs around here and saw this beaut for sale, getting it for $650. My birthday was Sunday and damn if this isn't my present I've been looking for a USP in .45 around here for months

There's a BB variant of the MP5 at my local pawn shop. Not airshit, (well technically airshit i guess) but it's a legit HK branded HK MP5 SubMachine Gun but chambered in 4.5mm.

Should I get it? It's "only" 90$. I got to fingerfuck it, it's all plastic except the internals, but it feels too flimsy to properly HK Slap it. But still, it controls almost identically to a real MP5. (t. rcn)

>>34941685
It's honestly really confusing that Nerf's attachments are all basically sized for normal picatinny rails.


They even make a "scope" that's basically just a mounting and some lenses for a smartphone so it can interface with a real scope, or at least be sighted properly.

They know.

File: gkkyAcU.png (3MB, 1871x748px) Image search: [Google]

3MB, 1871x748px

Hello friendos.

>>34942918
Banned in Australia for a reason.

>>34943660
Howdy!

>>34939685
I have decided the match TRS was a mistake, and people putting them in LEM guns are retards.

>>34941685
Weird. I haven't put a drop of oil on mine for months and I live where its regularly 100% humidity.

>>34944151
You didn't use the light trigger return spring? lol how shitty is it with the match one?

File: 20170822_184611.jpg (4MB, 4032x3024px) Image search: [Google]

4MB, 4032x3024px

Can I play too?

File: aa6.jpg (45KB, 600x485px) Image search: [Google]

45KB, 600x485px

>>34944450
>the Anakin Skywalker of HK pistols

>>34944483
I actually lol'd so hard

>>34944368
It's too light, not enough resistance, and it doesn't push your finger forward to reset

File: 20170822_191001.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>34944483

>>34944700
And apparently I overestimate my power to take pictures correctly.

>>34932983
Lol

>>34944884

within a week and a half I'll have mine I can't fuckin wait

File: mk23_2.jpg (64KB, 650x255px) Image search: [Google]

64KB, 650x255px

>>34944884
Sexy as fugg

Hey fellas. Anyone got a LEM trigger? You like it? I really like lite double action triggers like on Glocks.

File: VP9 perfected.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>34945835
LEM a shit and nothing like a glock trigger. Closest thing HK makes to a glock DAO is in the VP9

>>34945835
>Anyone got a LEM trigger?
Yes
You like it?
So far, yeah, it's basically a SAO trigger with a DA first shot, but the DA pull is almost weightless.

With that said, DA/SA is just as good

Go to a gun store and handle a Walther Creed, it has the exact same trigger they just ripped off the LEM from HK

>>34944483
i don't get it, pls explain

>>34945885
did you get your slide custom milled for that red dot?

>>34946167
I did, and then 3 weeks later HK announced they are going to produced a factory milled slide model.

>>34946187
sorry bruh. when did HK say this exactly? Link?

>>34946279
http://www.thefirearmblog.com/blog/2017/03/01/hk-sfp9-l-sfp9-sk/

Do I get a USP45T first to see if I like it because it's cheaper and more "reasonable" or do I go straight for the big memes?
Assume I can only get one for now, but still maybe get the other one further down the road.

>>34946371

Figure it this way - which one would you regret not getting more. Either way, Mk23 will probably keep it's value and sell better if you ever decide you don't want it anymore

>>34945885
>shits in the best trigger for CC
>niggers out his pistol because he can't aim
>>34945835
A Glock is a single action if anything.

>>34946458
VP9 has the best trigger of the HK line-up. At the very least its the best striker fired trigger except for maybe PPQ

>>34946458
>Niggers out Pistol
1. Redguards can't afford RMRs
2. USPSA Open and carry optics class is a thing
3. LEM is still the worst trigger HK makes

>>34946555
worst trigger HK makes=/=worst for carry

>>34946570
but its a great trigger

>>34946579
I know, there's no point in striker fags. They want to carry the closest thing they can to a series 80 racegun with the safety ground off.

>>34946602
>*there's no point in arguing with strikerfags

>>34946602
>implying striker guns suck

File: IMG 2830.jpg (621KB, 1944x1296px) Image search: [Google]

621KB, 1944x1296px

what replacement parts should I preemptively buy for my USP .45 for what I hope is my one and only purchase from hkparts?

File: 20160425_165241.jpg (2MB, 2263x1091px) Image search: [Google]

2MB, 2263x1091px

An HK is fine

File: 20170221_185435.jpg (1MB, 1951x1165px) Image search: [Google]

1MB, 1951x1165px

track day, bro
track day, bro
track day, bro
TRACK DAY, BRO

>>34946663
Magazines, Threaded barrel, thread protector, heavier recoil spring, match trigger kit, USP Tactical night sight set.

>>34946663
What don't you like about it? Why aren't you using brownells?

>>34946555
>LEM is still the worst trigger HK makes
I'll bite, why? Because that is an impressively fucktarded statement

>>34946618
How did anything I say imply they suck? If anything I implied they were good for the range at competition.

>>34946746
You are an idiot if you order that shit from HKparts

>>34946752
>What don't you like about it?
hk parts are hard to get in leaf land. rather just make one big purchase of all the springs and other shit I might need in the course of first 10k+ rounds.

>>34946663

>>34946746
>Magazines
Do NOT buy from HKparts, buy from Midway or use google to find them for $35
>Threaded barrel
Dumb to buy but if you do buy a Jarvis with a logical thread pitch

>Tread protector
Jaris ships with one

>Heavier recoil spring
Buy a Wolf spring from Midway

>match trigger kit
EurOptic carries them for significantly cheaper

>USP Tactical night sight set.
Get fixed suppressor height straight-8 night sights

>>34946903
>buying a non OEM barrel
>for an HK
This is retarded.

>>34946822
>USP45
>10k rounds
You won't need to replace anything. At twice that number I'd consider a new recoil spring.

>>34946926
>"I'm a stupid bitch"
You don't know what you're talking about, copy that.

>>34946942
I'm deeply skeptical about magazine springs. Definitely buying more mags/replacement springs.

I appreciate the quality of life suggestions too. will look into heavier recoil spring and match trigger.

>>34946960
You're the one recommending a land and groove barrel.

>>34946963
HK mags have shit capacity for a reason, the mags don't wear out as fast as you'd think.

If you're dead set on it buy
>Match sear spring
>Heavier recoil spring
But really that's about all you need. If you want to go full retard by all means gut her and upgrade, but don't feel pressed to, you'll be alright if you don't.

File: han-solo-return-of-the-jedi.jpg (75KB, 660x350px) Image search: [Google]

75KB, 660x350px

>>34947003
And?

>>34947012
>Heavier recoil spring
got a link to a particular one?

>>34947055
It's shit.

>>34947058
Just a Wolf, 16lb

>>34947065
And why would that be?

>>34947172
Polygonal=greater muzzle velocity and extended barrel life.

>>34947208
Velocity increase within ammunition inconsistency levels and barrel life that is negligible on low pressure pistol cartridges. Any actual reasons?

>Tgere are a couple actual reasons to keep with OEM barrels btw, you just don't seem to know them

>>34942879
>There's a BB variant of the MP5 at my local pawn shop. Not airshit, (well technically airshit i guess) but it's a legit HK branded HK MP5 SubMachine Gun but chambered in 4.5mm.
should i drop dosh on it or not

send help

on the one hand, airshit
but on the other, it will make /k/ angery every time i shoot it
but on the other other hand, its airshit not even worth plinking with

File: 1503007925719.jpg (107KB, 534x601px) Image search: [Google]

107KB, 534x601px

So if I wanted to LARP with a HK setup, what rifle and pistol should I use?

File: 20160628_152632-1.jpg (3MB, 2799x1786px) Image search: [Google]

3MB, 2799x1786px

Love HK.

>>34948959
SL8 with XM8 kit
Mark 23 with Wilcox LAM and KAC suppressor

>>34948959
USP .40 and MP5/10
MK23 and G3KA4

File: umahk2.jpg (1MB, 1500x1911px) Image search: [Google]

1MB, 1500x1911px

>>34947801
just because it is HK branded does not mean it is made by HK.
The licensed producer of most high quality airshits with some original HK-parts even is UMAREX.

They are extremely high quality toys.

>pic related