Best sbr that's not an sbr...

File: 1502005467257.jpg (46KB, 640x360px) Image search: [Google]

46KB, 640x360px

I'm kinda interested in that micro roni conversion. The carbine conversion has this ridiculous looking 16in glock barrel.

My only caveat is I mostly shoot at a public range and I don't want to catch shit for shoulder the stabilizing brace.

>>34897686
But anon, it's ok now. Look it up

>>34897163
I'm in the process of trying to sell my gen 2 vector crb in 10mm.

Build quality is pretty poor.

If you don't lock the hammer back before field stripping, it will swing out and dent the polymer near the ejection port.
The polymer itself is too soft and too thin. When the charging handle slaps the side of the thing, it makes a dent.
The recoil system is overrated as fuck. A good muzzle brake does the same thing while taking up less weight and room. Speaking of which, the impulse from the recoil system bouncing back up actually throws off your aim, so it's an additional thing you have to compensate for.
The safety switch digs into your index finger when firing (if you're a righty)
The collapisble stock hinge also digs into your index finger when firing (again for righties)
The 10mm version mauls brass, which is important because reloading 10mm is a big deal.

There are additonal problems that don't apply to the SBR version, only the CRB
It's heavy as fuck, almost 8 lbs, for a fucking carbine
No option for threaded muzzle because the barrel shroud takes up the entire barrel
The barrel shoud is held in place by ONE screw. It's got loctite red on it.
There's a tiny gap between the muzzle and the shroud so over time carbon and shit gets inside the shroud and you can't clean it without burning the loctite off the shroud screw to remove the shroud.
The defiance stock sucks ass.They should've kept the gen1 stock with the lower cheek weld.

Basically it's an overpriced piece of shit. Just build a SBR ar15 in a pistol caliber.

>>34897967
thx for heads up on quality issues. Agreed the Kriss is too heavy. An 80% lower ar pistol build is probably hard to beat for the $/leathal/size equation. I do wanna try that roni though

File: 1495345728407.jpg (758KB, 1594x897px) Image search: [Google]

758KB, 1594x897px

>>34897967
Step up, sempai.

Should have got the SDP :^)

File: 1499822504078.jpg (100KB, 540x540px) Image search: [Google]

100KB, 540x540px

>>34897967
>He doesn't make sure it's cocked before disassembly.
>Valid complaint.
>Semi-Valid complaint, you haven't shot it enough.
>Invert the safety on the other side so it goes up with the safety is disengaged.
>Put the pin in the other way.
>Not on mine.


Not sure what to tell you mate, I'm not exactly IN LOVE with this thing, but it's nowhere near worth selling the best 10mm PCC out there, but I didn't get the CRB.

>>34898550
The shit I said applies to all of them, you post purchase rationalizing tool.

>>34898581
See.
>>34898580


Don't be salty you didn't research which was the best before hand.

>>34898580
>He doesn't make sure it's cocked before disassembly.
Name one other firearm that requires cocking before disassembly. It's also a ridiculous design oversight that there isn't a shim or plate there to stop the hammer considering one of the major selling points is how easy takedown is.
>Invert the safety on the other side so it goes up with the safety is disengaged.
In fact I did, but it's a no brainer design aspect that they should've caught the first time someone picked one up to test fire it.
>Semi-Valid complaint, you haven't shot it enough.
If you shoot anything enough you can get used to any sort of shitty recoil profile, it doesn't make it anon-shitty recoil profile.
>Put the pin in the other way.
Doesn't help, it has to do with the actual hinge itself, not the pin. I guess you can make it work if you have handlets though.
>Not on mine.
Check your brass again.

>>34898591
None of those addresses the shit tier polymer that kriss uses.

>>34898550

Is that supposed to be an armbrace? where the fuck does the arm fit lol

>>34897163
I had to google that anon I though I was looking at a fleshlight holder,

t. non american

>>34898647
Considering the ejection port is a user servicable part and says so in the manual, the complaint about the hammer is invalid.

If you did it and it solved the problem, who the fuck cares.

Literally retarded.

How the fuck are you holding it that that the hinge rubs your ham fists.

It literally doesn't, I've inspected and reloaded my shit several times already.

>>34898655
It's a tail hook.

It flips open to support on your forearm from underneath.

>>34898647
I believe he said it was the only valid complaint you made, there homeskillet.

>>34898663
>>It flips open to support on your forearm from underneath.
winking and nudging intensifies

>>34898663

Ahhh, I think I see. So it counts as pistol, right?

File: 1495774081292.jpg (384KB, 897x1594px) Image search: [Google]

384KB, 897x1594px

>>34898685
Yep.

>>34898684
:^)

>>34898657
Our laws are better than most countries, but some of the ones we do have are pants on head retarded. I like the kak brace, it's not as comfortable, but it doesn't look like a fleshlight holder.

File: 1477828025520.jpg (336KB, 897x1594px) Image search: [Google]

336KB, 897x1594px

>>34898703
I do kak too.

>>34898706

Whats with that stock? Is that fuckin legally a handgun, too?

>>34898707
It is infact legally a pistol according to our fantastic ATF.

>>34898712
Until they change their mind again

>>34898712
I think if the oal is more than 26" it's considered a "firearm" and you could put a vfg on it unlike a pistol. Don't quote me on that though.

>>34898730
No, you can.

That's not 26" OAL though.

Autistically measured, but I'm not really looking to put a VFG on it anyway, so the handstop is fine for me.

>>34897163

PAK9 with a 30rd mag. Fun little 9mm AK along with a hand stop. I'll take a pic later.