QTDDTOT

do what you want it's your gun

>>34775847
Are there any drawbacks from a mechanical/reliability standpoint?

I cant think of any. But I dont know what I dont know.

I had a question earlier for a QTDDTOT thread but there wasn't one. DAGNABBIT!
Maybe I'll remember it.

File: god.jpg (25KB, 418x500px) Image search: [Google]

25KB, 418x500px

>>34775837
>9mm bore
>5.56 flash hider
what could possibly go wrong

>>34775907
Fuck yes I remembered it.

Has anyone who ordered an HMG StG gotten an email asking about which color stock you want?

They wrote somewhere (maybe their website, maybe facebook) that they would send out emails about a month before your gun was to ship, asking if you wanted light or dark stained wood.

Just curious if they've gotten that close to shipping any yet.

A guy at my shooting club recently bought a HK SFP9 and it was getting constant failure to feed issues and failure to eject.
Anyone have experience with this problem? And how to fix it?

File: YHP.png (108KB, 1013x253px) Image search: [Google]

108KB, 1013x253px

>>34775934
>implying they dont make flash hiders for 9mm ARs that fit 1/2X28 threads

File: 9mm a2 flash hider.jpg (64KB, 2000x1334px) Image search: [Google]

64KB, 2000x1334px

>>34775934

nothing, cause you get one bored out for 9mm.

>>34776104
Also the slide would not stay open after emptying the mag

>>34776126

change magazines, change ammo, and clean and oil the gun. more often than not, malfunctions are either caused by defective, damaged, or out of spec magazines, or poor quality or otherwise defective ammunition.

as for the not locking back, thats either a magazine issue, or a grip or finger position issue. not having handled a VP9/SFP9, i can't comment on the location of the slide release and the potential of fingering it during firing, but it's always a possibility.

File: DSCI1088.jpg (2MB, 3000x4000px) Image search: [Google]

2MB, 3000x4000px

Is it normal that on a 1911, the ejection port is actually too short to fit a .45 round through sideways?

>loaded gun
>want to clear it
>drop mag
>rack slide
>gun spergs out
It ejects fine when you shoot it, the empty casing flies out no problemo, but the extra length of the bullet gets stuck on the forward end of the ejection port when I try to manually rack the slide. Worst case, the round gets stuck diagonally with the slide arkwardly held back by the stuck round.

Is that normal or do I just have a 1911 with a rather short ejection port?
Whats the ideal way to resolve that situation? I did resort to dropping the mag (if not done be4), slowly letting the slide go forward and pushing the round down the magwell. It kinda works, but I assume just pooping the round out like that looks somewhat disgraceful... if there's a better method, I'd like to know.

Pic is related.

>>34776104
I agree with >>34776166, probably bad mag.

>>34776169
You just got a reject. But don't worry, a dremel will fix it right up. Just open that baby up a bit. An inch or so ought to do it.

>>34776169
Bro. I dont have a solution for you other than CS/warranty work.

But please dont do this >>34776221

>>34775862
yeah dude if you put a small piece of metal on the end of the barrel it makes the trigger not work and the mags eject by themselves

seriously if you have to ask this question you honestly shouldn't try messing with guns

>>34776261
It's almost as if there's nothing in the way of ramifications for asking questions.
It's almost as if I'm secure in asking questions/ admitting there's a lot I dont know.

I'm sorry I hurt you so much anon. And I'm sorry I left for smokes and never came back. You and your mom are still in my heart.

>>34776188
>>34776166

Thnx
Might be the case. These mags were new out of the box HK mags. Maybe the spring needs some working in

Are there any sights that co-witness with an Aimpoint Micro T-1/T-2 on a 6 second mount? How about an RMR on the same mount?

>>34776242
>CS/warranty
naw I'm pretty sure its intentional, I was just wondering if its common. Thanks for your concern though, I know that gun+dremel=bad. Got a gun very cheap because a previous owner was a dipshit with his dremel. Had the barrel replaced, good as new. I could resell it and literally make dosh, but I kinda like it so I'm keeping her.

>>34775837
It'd be cool to put Flashhider/QD for a suppressor on a glock.

>>34776637
I was thinking the same thing.
Looks like Yankeehill would be my only option, but I need to research further.

>>34775837
has anyone here used 300AAC to hunt?

im considering making a hunting upper

>>34776705
specifically white tail I should add

>>34776705
It's only good for 100 yards at best. Unless you're gonna suppress it to kill hogs, go for 6.5 grendel.

>>34776724
so you wouldn't trust it to drop a dear at 150y? assuming I can shoot worth a damn.

what about if I hand load?

>>34776766
If you got some hot 135 grains maybe you could, but the dropoff on 300AAC is pretty massive.

At 200 meters, hot 135gr 300AAC has about half the energy of 123gr 6.5 Grindel.

>>34776766
Sounds like your trying to force something into a role.

It's no skin off my nose. But you may want to consider other options.

>>34776887
whoops you're

File: fucking teleporters.webm (3MB, 960x540px) Image search: [Google]

3MB, 960x540px

does /k/ plays games together?

i found one that made me remember what /k/ means

>>34775862
Messes with lockup timing. You'll need a lighter recoil spring unless you only shoot hot loads.

What is the most likely cause of a round not firing off but when ejected and put back in the magazine it fires just fine?
I'm firing aguila, walther ppq m2 navy

>>34776766
Our analytics guy at work takes whitetail with his every year. Much like 7.62x39, 200y and in and you're fine.

>>34777024
Light primer strike, check your rounds after the first trigger pull it should have a shallow indent.

Easiest fix would be to use different ammo.
Other option is replacing the firing pin spring.

>>34777024
Did you see an indention in the primer? If so, it might be a problem with your striker. You can do the old redneck ballpoint pen test where drop a flat plastic base ball point pen down your barrel and see if the striker launches it a good ways up.

If there wasn't a mark on the primer, you might have had an out-of-battery malfunction.

>>34777011
Does that have to do with the fact that I'm throwing extra weight on the end of a tilting barrel design?

I figure if G17s run just fine with 6" barrels, I'd be okay with a flash hider?

What would happen if someone showed up to a range with a "homemade" full auto AK? Is the average fudd a snitch?

>>34777161
>Does that have to do with the fact that I'm throwing extra weight on the end of a tilting barrel design?
Yes

>I figure if G17s run just fine with 6" barrels, I'd be okay with a flash hider?
Most likely

>>34777188
Assumptions be damned, you really want to risk a felony conviction on this shit? Risk vs reward, dude. Shoot that shit on some private land.

>>34777024
>putting a round that failed to fire back in your fucking magazine
WEW LAD

File: 4507261_01_m_p_fde_full_size_45acp_thread_640.jpg (43KB, 640x480px) Image search: [Google]

43KB, 640x480px

Is striker-fired or hammer-fired better for a suppressor host, and why? Is one or the other quieter when suppressed?

Plz help and no bully.

>>34777209
I do it all the time. No big whoop.

>>34777200
i don't actually have one, i'm purely curious.

fucking fascinating how a community dedicated to preserving freedomsticks at all costs would run and cry to the feds at the sound of too many pews

File: IGLA-S_MANPADS_at_IDELF-2008.jpg (191KB, 1920x1190px) Image search: [Google]

191KB, 1920x1190px

How difficult would it be to turn one of these into a bong?

File: mfwww.jpg (39KB, 459x438px) Image search: [Google]

39KB, 459x438px

>>34777309
>i don't actually have one, i'm purely curious.

Of course.

File: GlawkBweight.jpg (711KB, 2448x3264px) Image search: [Google]

711KB, 2448x3264px

>>34777195
Hmmm, the flash hider weight may be more of a factor than I thought.

Glock 17 barrel weight 4 oz.
Most flash hiders weigh around 2.

That's a 50% increase in weight. Perhaps this endeavor isnt worth it.

Thanks either way.

How is pocket carry? Thinking about a J frame and a pocket holster

>>34777344
I imagine if you have a drill bit that's strong enough to make some holes then not very hard.


>smoking it by your self though...thats the difficult part

>>34777421
>smoking by yourself
I bet you jerk off alone too huh?

>>34777401

I used to pocket carry a J-frame, one day I went on a long walk and ended up with a revolver-shaped bruise on my thigh. Shortly after I got a Keltec P3at.

>>34777452
Interesting. Were your pockets baggy?

I'm interested in pocket carry because my workplace requires tucked shirts so OWB isn't really doable and IWB would be hard to access.

>>34777491

Fairly so, it takes pretty deep pockets to fit a J-frame well. A lot of khakis and slacks aren't quite deep enough and the butt of the grip will end up poking out.

>>34777309
>run and cry to the feds at the sound of too many pews
Because if they don't they can be charged as accessories to the felony or something. Particularly the range owner.
So the hypothetical owner would be much better off shooting on private land.

File: IMG_0866.jpg (69KB, 633x348px) Image search: [Google]

69KB, 633x348px

Any good da/sa, single stack 9mm pocket guns? Other than the sig 938 of course

>>34777274
there should be no conceivable difference between the two.

>>34775837
Wait a sec, can the Hognose Effect™ actually affect laser/light accuracy?
Shit I never thought of that.

File: 1911 slide.png (895KB, 1919x1033px) Image search: [Google]

895KB, 1919x1033px

>>34776169
hopefully this is helpful for you. Looks like it should be 1.157"

>>34777122
It launched up. I kind of wish I checked the primer while I was at the range.

>>34775837
I was watching this video of a guy turning a glock into a fully auto hand gun.

I was wondering what exactly is the disconnector pressing up against and what is actually going on with that little mod? When fired does the disconnector move or perform any extra action? Or is it just pressing on that little thing.

Is that the connector or the trigger bar its pressing up against?

>>34778526
https://www.youtube.com/watch?v=5daUortNVcw&t=231s

forgot link.

File: 20170807_114330.jpg (1MB, 2160x2160px) Image search: [Google]

1MB, 2160x2160px

Was digging through a whole bunch of shit,
round a replica .357 sunbnose model. Can anyone tell me the brand, and if it's worth remotely anything? Pic of logo on grip

>>34777586
Shit. I wear khakis/slacks with fairly narrow or shallow pockets.

How else can I carry?

>>34778690
looks like an M and an R. I wonder if it's a knockoff of a Manurhin.
how bout some pics of the gun itself?

>>34777640
a p938 isn't da though

File: 1496785846333.jpg (87KB, 610x357px) Image search: [Google]

87KB, 610x357px

>>34775837
Does SAO mean you have to pull back the trigger for the first shot of a 1911 mag or for for every shot?

>>34775837
best camouflage for kommiefornia

>>34778827
You have to pull the trigger for every shot.
I suppose you mean hammer?
You pull the hammer back for the first shot. The slide going back cocks the hammer for every shot after that.

will my r1 1911 ever fire hollow points +p? it used to but now they fail to feed.

>>34778857
Is this a joke?
Of course not.
It's a 1911 for God sake.

>>34777309
>community dedicated to preserving freedomsticks

Not even remotely close to 100% support across the community.

File: 1487023345410.jpg (32KB, 750x400px) Image search: [Google]

32KB, 750x400px

>>34778835
Ty

File: thumbs up fag.jpg (69KB, 617x545px) Image search: [Google]

69KB, 617x545px

>>34778913
YW!!!

>>34778827
>>34778835
racking the slide cocks the hammer
you must rack the slide to chamber the first round
you never have to pull the hammer back manually unless you did something stupid like manually decocking it

>>34778964
not everybody likes to carry condition fabric.

>>34777588
Nah, LEOs shoot full auto at the local ranges here at DFW regularly. I'm not calling 911 just because I hear it.

>>34777274
Nice S&W, twin anon.

>>34777344

The hardest part would be living with yourself knowing you're such a massive faggot

File: 1496301762165.jpg (13KB, 200x200px) Image search: [Google]

13KB, 200x200px

Back again

$102 amazon credit. wat do

Own AR, .243 Savage, .270 Win, 9mm Sig p226

Additionally have cases, locks, and cleaning supplies but that's about it.
AR has mags and iron sights, and that's it.

What do I need for general gun ownership's sake?
Range gear - AR accessories - tools - ????

>>34779146
Candy you can't buy locally. Good german chocolate. Some of that weird japanese candy that's like a chemistry set. shit like that.

File: 1399372551160.jpg (199KB, 500x468px) Image search: [Google]

199KB, 500x468px

>>34779156
pls no bully

>>34779186
I'm serious. Why not? You're not going to get anything good, gun wise, on amazon, so just blow it on something stupid, like candy.
Maybe you could find some cheap earpro in your price range.

>>34776944
This looks like some kind of weeb game

File: CZ-75-Rami.jpg (106KB, 640x425px) Image search: [Google]

106KB, 640x425px

How much would you clean your gun before selling/ trading it? I'm going to trade my Glock 30S for a CZ RAMI tomorrow and there might be the slightest amount of pocket lint in an area I can't reach. It's not even my lint, it came with the gun used. The gun looks clean otherwise and I don't want this guy to back out for any reason.

File: IMG-2752.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>34779198
>>34779146
fair enough, but if I transfer it out to paypal, whats a good use of $100 spare dollars for /k/ related activity, used on anything online?

>>34779219
>pocket lint in an area I can't reach.

You gotta get creative. Use a toothpick, or one of those cans of compressed air, something like that.

>>34779232
Ammo. You literally can never have too much.

>>34779232
more 7 layer dip

>>34779274
what's a good place to get good 9mm target ammo and good 9mm defense ammo online?

>>34779395
ammoseek
it's an aggregator that finds the best prices for you

>>34779232
dat mini mag package

File: 20170807_123354.jpg (1MB, 2160x2160px) Image search: [Google]

1MB, 2160x2160px

>>34778808
Mgc turned out to be the brand, it's a blank firing replica, found another one at the bottom of the same box.

I am aware that I'm an idiot for not seeing the stamp.

File: IMG-2748.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>34779487
That particular range day was funded by digging through a buddy's garage for hoards of ammo his dad wanted us to clear out for him. Lots of ancient stuff in there, as well as strange things like .303 British for which he didn't have any rifles for

>>34779576
Fuck dude, I'll take some of that 303 brit. Currently trying to restore and "unfudd/unsporterize" an old enfield. Will need some ammo.

File: 1492139356164.png (29KB, 741x568px) Image search: [Google]

29KB, 741x568px

>>34775837
ar newfag here. just put a flipup sight on my railed gas block and realized the RGB is fucking canted horribly and i cant sight in my gun bc the rear sight doesnt go far enough to the left. I'm guessing I'll just replace the RGB with a new normal front sight gas block. how the fug do i make sure the front sight gas block doesnt end up canted too???

>>34780091
You'd better hope that it is just the gas block that is canted. If the gas port is off center, you're sol.

Is the block pinned or is it a clamp-on?

Painting a glass-reinforced nylon stock.

I scuffed it with 220 before cleaning and painting. OOPS.

Now, even after a couple of coats, it is a hairy bastard.

Anything to do other than spray it with a thick coat of primer/filler to bury the hairs?

>>34780150
i think its clamped on, its a dpms oracle and theres some hex screws on the bottom of the gas block.

I think i might just buy a 20 inch barrel and install a front sight gasblock anyways. How does one make sure the front sight is straight? will the gas port be perfectly straight?

>>34780200
You may be in luck. The gas block will have a port in it that needs to exactly line up with the gas port in the barrel.

A quick look at https://www.youtube.com/watch?v=M-iPHq3uE4w (if this is the same as yours) shows that the barrel has elongated dimples for the setscrews to go into.

You may be in luck and it was just slapped together cockeyed.

Have you shot it yet? Does it actually function?

You're going to have to loosen the gas block set screws and see if the ports lines= up or if you can straighten the block and still have it lined up with the port in the barrel.

>>34780091
You can't just replace a set-screw style gas block with a "normal" front sight gas block. The normal ones are retained with a tapered pin. The hole for that pin goes partially through the barrel.

You need a proper jig to drill for the pin.

But you have to make sure your gas port isn't canted first.

File: 1492055858979.jpg (148KB, 1366x824px) Image search: [Google]

148KB, 1366x824px

>>34780312
Thanks anon!!!

yes she shoots just fine, my only issue is that her front sight is canted. Really a great rifle as a hillary panic-buy (i know im fuckin retarded) but this issue is a big deal for me since my operator fantasies require that I have backup irons in case my optics break.

File: untitled.jpg (117KB, 1148x442px) Image search: [Google]

117KB, 1148x442px

I posted this in another thread but I figured I'd just drop it here in case

So when I try to eject a spent shell out of my ithaca it is difficult to pump, and requires a good bit of force to cycle. This doesn't happen with a dummy round or a live round, they both eject perfectly, and it cycles with no issue when there's nothing in it which is why I didn't notice when I bought it.

Would you know of any quick fixes for it? I have a few spent shells laying around I can test with

I've been fucking around with it for a few minutes, there's nothing wrong with the feed or cycle, it's just like the tip of the plastic expands too much and causes the extractor to need more force than it should to do it's job

>>34780800
rough chamber? Flitz it.

File: untitled.jpg (140KB, 754x631px) Image search: [Google]

140KB, 754x631px

>>34781181
I found this little bit of burned plastic jammed down in behind the barrel, after about half an hour of prying with different tools I had on hand I managed to pop it out.

I think this might've been the problem, but I'm definitely gonna clean the chamber and re-oil it

are legion aks quality?

File: absolutely disgusting.jpg (35KB, 262x351px) Image search: [Google]

35KB, 262x351px

>>34780091
Shouldn't have bought a railed gas block you fucking mong

>>34781477
Pretty sure Legion only sells Vepr's so yeah, they're quality AK's.

>>34781520
legion builds are molot parts on nodak spud receivers, cant find any reviews of their build quality tho

>>34781551
oh, I didn't know that. i do know they also sell Veprs.
no clue about their in house made guns. I'm curious to know if they're any good also.

File: 1499469504696.jpg (77KB, 640x640px) Image search: [Google]

77KB, 640x640px

>>34781511
ANON I THOUGHT HILLARY WAS GOING TO WIN AND IT WAS THE ONLY AR LEFT IN THE SHOP CUT ME SOME SLACK

File: 1500876161290.gif (1MB, 400x226px) Image search: [Google]

1MB, 400x226px

>>34781703
So you bought a cheap AR, literally the most common rifle in the US?

Anon, come on.

File: 2r39m3q.jpg (50KB, 640x480px) Image search: [Google]

50KB, 640x480px

How do I prevent this?

>>34776261
>guy who comes to QTDDTOT to be an ass
>>34777011
>actually contributes

>>34777401
not great. i tried it once, and i didn't feel like the gun was secure or could be accessed quickly
depends on the pants i imagine

>>34778832
whereabouts? I'm an area pretty well suited to multicam, but i've been to areas that would be prime for pencott greenzone. I've actually been to an area where ACU worked in CA. Its a big place

>>34782255
you filedown the lock on the charging handle to make it smoother. it will still wear but will be cleaner. bit late for that now

I'm planning on making a ghillie suit because I have a few surplus military jackets/pants. Does anyone have any infographics on ghillie suit making or general tips ? Thanks.

>>34782529
break up your outline, especially of your head and shoulders
use netting so you can incorporate local flora
realize it will be hot, and incorporate ventilation
anticipate the types of movements and stances you plan to use. reinforce drag areas, and don't overly camouflage areas that will be obscured by terrain
good camouflage that's moving is more noticeable than poor camouflage that's still

>>34782633
Good tips, thanks for input. I'll be sure to remember this.

File: comfy.png (6KB, 377x326px) Image search: [Google]

6KB, 377x326px

Is there any legal bad juju with using NFA items in home or self defense scenarios?
A suppressed SBR sounds pretty choice for stopping Jamal and friends, but I'm worried there's some kind of legal nonsense surrounding it.

>>34782943
Remember that if your case goes to court, you have to convince 9 normies what you did was not murder, while some other chuckle fuck will appeal to emotion for hours with the sole intention of convincing said 9 normies that you are a baby killer. It's not any more illegal than shooting an intruder with any other gun, just have a really good lawyer on standby.

>>34782943
On top of what other anon said there is a very good chance that the police will take any weapon used for dindu removal for at least as long as it takes your case to get through the court system.

Fuck that, just use a mossberg shockwave.

>>34782952
go back to /r9k/
>>34783063
don't get a shockwave, real life isn't video games, go back to /v/
>>34782943
if you can afford a suppressor and the tax stamp you can afford a lawyer. he will answer questions like this and tell a jury why it's legal.

>>34780091
You really need a gunsmith to install a front sight base, it is not a DIY job.

The better alternative for you is to install a low profile gas block and then an extended free float rail to cover it up.

>>34783078
>lawyer tells jury why an evil salt rifle, designed to be better able to conceal, with a suppressor for assaniations is legal
>prosecution explains that it is a tool used by professional killers and spree shooters
>jury hangs anon so he doesn't shoot up a school
I have absolute confidence in our legal system. Who was that guy that was convicted and spent two years in jail after using a 10memeometer in self defense and was later acquitted?

>>34783078
shockwave is just as practice as a suppressed SBR for home defense.

>>34783091
Historically good advice is to find out what the local police use and then use the same.

This doesn't work however if you are in a city and you get a dindu jury that thinks police are baby killers.

File: 325235.png (496KB, 385x590px) Image search: [Google]

496KB, 385x590px

Can someone help me identify the SMGs in pic related? The one on the far right is a FAMAE SAF, but how about others? They look like Beretta M12s but I am not sure.

>>34781703
Just take an angle grinder to the son of a bitch and leave nothing but the part that's actually a gas block. Put an 11 inch rail on it to hide your sins. Install red dot.

>>34779207
It is a weeb game.

"Ghost in the Shell: Stand Alone Complex - First Assault Online"
One of my weeb friends tried to get me to play it with him, its basically a counter strike clone with absurdly OP anime special abilities like cloaking, teleportation aimbots and shit, because everyones a murder cyborg and not a human. It's a JapaKorChinknese grindfest.

Also why the fuck do weeb games have such absurdly long names?

If i wanted to build a dmr type rifle would i be better served building an ar-10( or buying a specific one) or buying a ptr? Also, is a 1-6 or 1-8 a good optic for a rifle like that?

>>34782255
Why the fuck does it matter?

>>34780190
Sand it with smaller sand paper.

>>34783154
Beretta M12

>>34776417
kek, I like your style

>>34776944
Christ I miss playing this game

Fuck the Philippines

File: 1497555218662.jpg (29KB, 320x283px) Image search: [Google]

29KB, 320x283px

>>34777011
>shoot hot loads
Thats all i shoot

What is the most gun friendly state in the union?

Assume I'll move anywhere. Also assume I can't move to Alaska for lack of job opportunities.

File: youu.jpg (41KB, 500x322px) Image search: [Google]

41KB, 500x322px

>>34784052

>>34784093
I wouldn't expect a new england state to be up high on the list, but I think Vermont is almost on par with Alaska, when it comes to gun laws.
Either way, you need to love snow.

>>34784126
Fucking love the snow. And the cold.

Assuming I find a job in Vermont, I'll scope it out

>>34777452
What shitty guns. Get your shot together.

>>34775958

Anybody? Letter from HMG?

>>34777380
It's literally and demonstrably not an issue.

>>34782943
Valid self defense is valid self defense. Jew prosecutors will grasp at any and all straws, but it arguably won't matter.

my gun store has a crate full of different looking mosins covered in cosmoline, what should i look for if they're all the same price?

>>34784422
Bore quality, chamber/throat erosion.

>>34783783
i'd say AR-10 if only because of modularity and slightly better clipazine availability
i have a 1-6 on my ar15 that's bretty great

>>34784422
matching serial numbers, especially on bolt and barrel
shiny bore
crown that isn't chewed up/hasn't been counterbored

>>34784430
>>34784501
thanks
any other things besides the obvious, quality of the stock, etc?

>>34784430
>Bore quality, chamber/throat erosion.

While those are important things to look for, he realistically won't be able to see either of those things unless he removes the cosmoline from the chamber and barrel and uses a bore scope.

>>34784536
Do some research on what markings indicate common guns, and which ones indicate rare guns. Look for rare guns.

>>34784681
Lol what
They don't fill up the barrels like a tube of gogurt you sperg.

>>34784492
Thanks for the reply m8, would you suggest building or buying?

>>34784692
no, but they do put cosmoline in there. at least the ones I bought had a nice layer in the barrel. the first patch I pushed through pushed out a nice big glob of greasy cosmo.

File: download.jpg (11KB, 278x181px) Image search: [Google]

11KB, 278x181px

I backpack often in bear country.

What is the lightest gun that can handle moose and grizzly? Bonus points for autoloader, but wheel guns are OK too. Gotta save them grams. Cross posting on /out/.

Don't post the stupid story from the 1800s about the woman who took one with a .22.

Or the one about the guy escaping one by using a Bersa Thunder. [Spoiler] he just shoots his wife in the knee cap and leaves her as bait. [/spoilers don't work on /k/]

>>34784883
How about the one where the guy just straight up punched the grizzly in the nose and killed it. Man up and start punching shit

>>34784878
Sure, but my point is you can still get a good bearing on the condition from a quick look.

File: 1501370991532.gif (2MB, 257x189px) Image search: [Google]

2MB, 257x189px

>>34775837
A week ago I got a 7 day long global ban for posting a thread about weapons on here.
I didn't appeal or ban evade. Should I have since I didn't break any rules? Am I, dare I say it, a bootlicker for just waiting out my ban when it was absurdly long and for not having broken rules?

What's a good semi auto pistol to rent for an inexperienced shooter?

>>34784807
from what little i know about .308 ARs, not all of the parts are as plug-and-play as the 5.56 type. If you build, make sure the parts will fit. if you buy, make sure the existing parts will fit with anything you might want to use down the road. With that being said, spend the $ on a quality upper, and don't worry about spending for a brand name lower.

>>34785092
As many as you can.

>>34784883
glock 20. also just wear bells

>>34785111
Ok, but which should I start with? I tried a glock 19 but I didn't really like the trigger.

>>34777380
That's not a 50% increase.. Its 25%

>>34785124
>trigger snob
Try a 1911

>>34785134
>2 is 25% of 4
Whoa

>>34785092
Browning Buckmark

>>34785137
>trigger snob
Sorry, literally all I've shot is a .22 ruger, the glock 19, and some sig.
Do you have suggestions on what kind of 1911?

>>34785157
There are 50 billion variants, so honestly it's going to just depend on what they have. Ask for the nice one I guess.

>>34785167
The range has a Ruger SR1911CMD9mm, Sig Sauer 1911 XO .45acp, Remington 1911R1 .45 auto, and a S&W SW1911 e series .45acp.

Do any of these stand out for being better/worse for learning to shoot?

As a general rule of thumb stay away from Remington, they started going downhill as of 2008 if not sooner as they were bought out by foreign corporate interests who value profit margins over quality. The 1911 was also designed as a .45 gun, so I'd give the ruger a pass as well as its in 9mm.

S&W are a-ok, and sigs are great. Either one would be a good start.

>>34785201
Sig

>>34785134

150 is 50% more than 100, in other words 100 increased by 50% is 150.

6 is 50% more than 4. In other words, 4 increased by 50% is 6.

>>34776944
That rifle looks like a FAMAS and F2000 dumpster baby
I want it.

>>34785072
What was the thread?

>>34775837
First time shotgun owner, idiot question.
I'm cleaning and oiling this bitch, do I rub the outside of the barrel with oil as well?

>>34786432
sure. it won't hurt anything and it will help prevent rust.
but a super thin coat is all you need. basically wipe it on. wait a minute. wipe it off with a dry rag. you won't remove all the oil, but you will remove the excess.
have fun with your new gun, and be safe.
also, always wear hearing protection. you don't want to hear EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE all day every day, and night, for the rest of your life.
trust me, it sucks.

>>34786432
Yea and then lightly wipe down with a cloth so you leave a thin film of oil or CLP on it. You should do that with basically every gun.

>>34776610
It's not intentional that an unfired round won't eject. Some would call it a safety risk

File: KF2HPbq.gif (2MB, 360x202px) Image search: [Google]

2MB, 360x202px

If I buy a gun and something's fucked off to the point that I have to send it back to the manufacturer, when they send it back to me does it have to go to an FFL or can they send it directly to my door?

>>34782255
Don't use your gun.

>>34786570
I've shipped a gun to a gunsmith directly from me to him and it was 100% legal. To me it seems that you sending a gun to the manufacturer for repair would be no different because it's not being transferred (sold, from you to them, and so on) it's just being sent in for repair work.
To be 10000% sure you could always ask the manufacturer when you're dealing with this hypothetical problem.

>>34786570
>>34786653
Also, when the gunsmith was finished, he legally shipped it right back to me.

File: IMG_1324.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>34777401
Put a clip on it. Super fast to draw and you can pocket or IWB if you want.

>>34785134
4 * 1.5= 6.

Even by your dumb logic, doing it backward, is 33%.

6 * .6666 = 4, 1 - 0.66666 = .33333.

5/10 got me to bite. Please don't breed.

>>34786789
Is that the 442? I'm thinking of buying a 642 to pocket carry. How do you like it?

>>34786570
FFL dealer here, the ATF says if I only have it one day I don't have to send it back through an FFL. If I keep it for more than one day, it's gotta to through an FFL dealer. Most gunsmiths are FFL dealers and just do the paperwork as part if the service, but if the gun crises state lines you're going to need to get it transferred. Talk to your gunsmith and see what he is willing to do.

File: image.jpg (3MB, 3264x2448px) Image search: [Google]

3MB, 3264x2448px

>>34775837
What he'll do I do with it? I can't display it with my military collection because people can't handle /pol/ and jump to conclusions. I have a shot up nazi banner as well. I've just haven't cared that much for nazi shit. I like German weapons and such. Tfw grandpa was gonna take me to Aberdean proving grounds then 9/11 happened, it closed to public and when it reopen my grand pops was dead. Lame.

File: thwap.jpg (16KB, 531x354px) Image search: [Google]

16KB, 531x354px

>>34786972
>>34777380
41.5%, gentlemen.

>>34786054
Morale Check / How you holding up

One with 300+ replies had been up a day or two before.

File: 1237761010590.gif (292KB, 432x197px) Image search: [Google]

292KB, 432x197px

Internal Ballistics question : At which point does the recoil start to kick in ?

>>34787693
all of the super slo mo stuff I've seen shows the bullet pretty far away from the barrel before anything starts moving.

File: boop.gif (2MB, 640x225px) Image search: [Google]

2MB, 640x225px

>>34787693
If that bullet is accelerating forward, Newton #3 would indicate something has to be accelerating backwards. How much you feel it in your arms depends entirely on how much the recoil spring is under compression.

>>34787789
>>34787829
So : is the idea that recoil has an influence on a single shot's accuracy a myth, then ?

>>34787829
>Newton #3 would indicate something has to be accelerating backwards
Which is typically the slide or bolt carrier group. It absorbs a lot of energy.

>>34787919
yes

Everyone talks about buds gun shop or grabagun or GunBrokers. What's wrong with cheaper than dirt?

>>34785134
RETARD ALERT

>>34787981
during the panic buying after sandy hook they not only raised prices (a $10 AR mag became a $100 mag) but they cancelled orders on guns that had already been paid for but not shipped, refunded the money, then raised the prices on the gun.
never forget how they went full jew, and never give them a dime.

File: IMG_1291.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>34786997
Likes it lots.
I did a trigger job and removed the lock. It's much improved and is a great little gun. Perfect for hanging around relaxing and still being armed. I've got serious autism but even I don't want to Chad it up by the lake with a fucking full gun belt on.

>>34788245
Maybe it's because, consider this, THEY HAD TO RATION THEIR GOODS BECAUSE OF HOW LIMITED THE SUPPLY WAS

Did you get upset at .22lr manufacturers for not producing enough when prices remained so low that people bought pallets of .22lr? Did you get upset at stores for raising .22lr prices in response to the scarcity of .22lr? Fucking idiot.

>>34786570
they ship it back to you. The only time the FFL stuff applies is when it is a transfer. Since you are sending a gun in that you already own for warranty/repair, it is not changing ownership and therefore is not a transfer.

Don't listen to >>34787024 what he is saying does not apply to you.

Over the years I've shipped various guns in for warranty work, and they always shipped directly back to me. The only caveat is that it must be signature required, both ways. I recommend USPS for rifles and suppressors, UPS for pistols and SBR's.

File: 1475161678431.jpg (150KB, 960x1280px) Image search: [Google]

150KB, 960x1280px

>>34779576
I'm glad I'm not the only one whose done that.

>>34788342
raising prices is one thing, but cancelling an order that has already been paid for is unacceptable. fuck them, and fuck you for defending them.

>>34776261
Im sure you've asked your fair share of stupid questions early in your wanna be mreen career. Cut the kid some slack, not even one knows "everything" fuckboy. Better to ask if you aren't sure than to assume and wind up in trouble.

>>34788690
>>mfw Federal forgets to include a flash hole
>Anyone else get any bizarre ammunition failures?

>Pruned or deleted

What the hell kind of mods do we have on this board that a perfectly on-topic and legal subject gets the axe?

>>34789154
He could have deleted it himself, or if he got permabanned on another board all of his posts on every board would have been automatically deleted. Maybe he posted some kiddie porn.

Weird question, but do the letters R A L A L have any significance to the US Navy? It may be a coincidence but I found it on a cold war era lock, that has another key marked USN.

IL sturmovik vs dcs World? Complete noob.

Could you sue a police department for damage/destruction of property if they scribe an evidence number in it after it's taken from a home defense good shoot situation?
Example 1:
>Repressed minorities find their way into your home with intent to rob/kill (have knives on their person)
>you hear the door open, you grab your shotgun
>you catch them downstairs in the kitchen and they turn around flashing their knives
>you give Jamal and his thot the double ought
>cops come, determine self defense but still have to take your gun for the official paperwork bs or whatever but you'll get it back
>elecropencil evidence number in it
Example 2:
>Be old fud
>only have hunting and ornate weapons
>most prized is gold plated garand which you hang over your bed, rest are in safe downstairs
>loaded with a clip of silver bullets too for shits and giggles
>blah blah, dindus start doin nuffin in your house
>Go down stairs and give Jamal and thot your 30 ought
Yeah the same joke is lame but I like it
>blah blah, cops say you're good but have to take gun because it would be racist not to
>fucks it up for essentially no reason

Would either of these meet the definition or damage or destruction to property?

File: 667099_ts.jpg (103KB, 1155x1155px) Image search: [Google]

103KB, 1155x1155px

Does carrying a handgun in a large external holster like pic related count as concealed carry?

File: flash hiders.jpg (599KB, 1512x2016px) Image search: [Google]

599KB, 1512x2016px

>>34775934
not all flash hiders are 22cal

Is a Hungarian Hi-Power good for 400 dollars with two sets of grips and mags?

>>34789694
>A WW2 flight sim vs a modern day one
I dunno anon, which is better, apples or oranges?

What's the reasoning behind some submachine guns (like the Uzi) having charging handles placed on top, between the sights? Yes I realize it doesn't interfere with the sight picture, but considering almost every gun has it somewhere else I find it odd.

>>34790228
actual hipower or feg knockoff? if its a feg its roughly 50 bucks overpriced. its its actual its okay depending on guns condition.

File: 04741454-05A2-4FCB-8339-B0CD7520AF40-11891-000009C24419AF4E.png (57KB, 320x180px) Image search: [Google]

57KB, 320x180px

>>34783063
"Shockwave is for retards who fuck their sisters"~Ian

Use a fucking stock
>muh overall length
Folders exist
When you are shooting a stock is a necessity

File: 1903.jpg (29KB, 640x284px) Image search: [Google]

29KB, 640x284px

>>34790929

Pistol, FEG, PJK-9HP, 9mm is how it's listed and it looks very good. However, I guess I can get the 1903 with series 70 peep sight for a couple hundred more then.

Should I trade my Norinco 1911 for a S&W 4506? Plz advise

Is Benchmade worth the price? I'm not a poorfag and I like nice stuff and they seem like a great product but I just want to know. I'm thinking about a Mini-Griptillian for EDC.

>>34788806
They canceled an order that was prepaid but refunded the purchase. Does it make sense to me? Fuck no. But it's not illegal. You got your money back.

>>34789694
Il-2 is much easier for a noob, and the sheer variety of airplanes and theaters makes for the definitive combat sim that will be played for a lifetime.

There's a guy in my area selling a SCAR 17, and I was thinking of trying to trade him a FAL and a Mark 23. Do you guys think that's a fair offer?

>>34791077
I've always been happy with mine, but I always got to handle and inspect them before buying. Seems like other people run into QC issues with Benchmade stuff sometimes. The Grips are damn good knives for the price and IMO they're definitely worth it, but that's really something you got to decide for yourself.

>>34791134

How the fuck are you defending CTD? Am I being trolled? Where is everyone else that used to scream about how dirty CTD is? Are all the people from 2012 gone?

File: rr22b6_1_1_.jpg (17KB, 579x240px) Image search: [Google]

17KB, 579x240px

Are these heritage rough riders fun? They're cheap enough to just pick one up for giggles.

>>34791877
single action .22 revolver, of course they're fun. i saw them on sale for $99 recently and came so close to buying one. being unemployed I just couldn't justify it.

Question for you all. What are some good, match-grade brands of .22 lr? Going to be a contest and I need some decent ammo to use / practice with. I got plenty of plinking .22.

>>34792202
Ely
Norma
Lapua
probably others, but those should get you started.

>>34791771
I remember Sandy Vagina, dude. Some of us didn't agree that CTD was shit. We just got drowned out by all the loudmouths crying about "price gouging" and "speculating" and other typical nonsense.

>>34791702
If they're like most companies they would accept returns through amazon if a product was defective. I'll see if any local places have some on the shelf (but Amazon typically beats them). Thanks for the advice.

>>34779232
start trading cryptocurrency to make more money to buy more ammo

>>34792357
Gambling is more fun at the casino.

File: file.png (671KB, 854x480px) Image search: [Google]

671KB, 854x480px

https://www.youtube.com/watch?v=2ZjCiEjZaw0
wtf I thought MRE's tasted like dogfood. This new stuff looks pretty appetizing, especially compared to some of the meals i've had innawoods.

File: 364737.jpg (10KB, 450x450px) Image search: [Google]

10KB, 450x450px

Would a BB gun be an alright item to introduce my kids to shooting if they're interested in it?

>>34792417
yup. i'd recommend the break barrel ones as they are the most reliable.

>>34787693
when the bullet moves forward
if you want to be a pedant, when the hammer moves the firing pin forward
every action has an equal and opposite reaction
>>34787789
this is because the recoil impulse has to move the mass of the gun before it can move your hand
>>34787919
for pistol and most close range rifles, essentially yes

>>34787981
CTD inflated prices on anything that might be banned after sandy vag.

>>34792690
Not true. They raised prices in anticipation of massively increased demand due to fear of gun bans to help mitigate the scarcity of their "assault rifle" supplies. Most shops and websites did that during the scare.

Typical retards will always cry for price ceilings though, I know better than to actually argue about it for any length of time

>>34789704
idk
i'd actually like the electropencil on mine; since it adds to the story unless it was a really nice range queen (in which case, why am i using it for HD?)

>>34792417
Sure. Just teach them the four rules first.

I had the exact gun in your pic when I was 12 and my dad still uses it to this day many years later to shoot squirrels's butts to spook them out of birdfeeders.

>>34791077
i carried one for awhile as my EDC. it was REALLY NICE KNIFE, to the point I barely wanted to use it.
now i carry a leatherman i have no qualms about using

>>34791134
>not illegal =/= right
they were shady as fuck once, they will be shady as fuck again if it suits them

>>34777640

Beretta Px4 Storm SubCompact desu

>>34792417
pellet guns are generally more accurate. also lead pellets don't ricochet like steel BBs do
IIRC crosman makes one that shoots both
teach the 4 rules first

>>34792459
this. Break barrels are more durable for sure, where as the red rider bb gun has been bastardized so much that they barely last a month after christmas. Break barrels are also not too kid friendly and require adult strength to operate. Good thing if you don't want your kids fucking with it when they're still too you and you're not around. Try to find one with a lighter trigger pull so your kids can actually learn fundamentals rather than trying their damndest to just pull the trigger. (idk how old we're talkin here)

>>34784028
K, thanks.

>>34790875
"Ambi" control

>>34791043
>Should I trade my Norinco 1911 for a S&W 4506? Plz advise

bump, yay or nay?

>>34793175
Yes

>>34793153
That's it? Nothing to do with how you carry it, or the nature of open bolt guns or something?

Which handgun is the most aesthetic when it has a suppresser on?

>>34775837
what holsters do you use/recommend?
what brands should i avoid?

anybody have any experience with black point tactical?

http://www.blackpointtactical.com/shop/light-mounted/

>>34793538
1911 if your using a traditional cylindrical can
if you are using a more boxy suppressor like osprey then maybe an HKusp or other similarly big boxy like the FN45x

File: 9175979293_8faf418e3c_c.jpg (323KB, 800x616px) Image search: [Google]

323KB, 800x616px

>>34793538

File: 44_magnum_revolver_with_scope.png (684KB, 1500x1000px) Image search: [Google]

684KB, 1500x1000px

Nofuns /v/irgin here here (EUSSR). How retarded is this?

>>34780190
Prime first and sand with finer sandpaper like the other guy said. As long as you don't sand through the coat of primer you're good.

File: marine-m4-carbine.jpg (225KB, 1000x558px) Image search: [Google]

225KB, 1000x558px

is it weird when you storm buildings with magnified optics? is everything super close and disorienting?

File: deagle scope.jpg (266KB, 1024x768px) Image search: [Google]

266KB, 1024x768px

>>34793642
A scoped revolver? Not very, handgun hunting is a thing that people do here, hell that was one of the primary design goals for the Desert Eagle. Ruger Super Redhawks come from the factory pre tapped and with a pair of scope rings included in the purchase price.

>>34793663
open your other eye and look through the scope
practice reaction time and point shooting

problem solved

>>34793677
Are revolvers more precise than pistols?
What range can you realistically expect to get out of it?

>>34793907
Revolvers are pistols anon.
If you mean semi-automatics, no not inherently.

>>34793907
>>34793907
Range depends on barrel length and what round it's chambered for.

>>34793965
>>34793642
This one, .44 Magnum.

>>34793951
>Revolvers are pistols anon.
https://www.google.com/search?q=Revolvers+are+pistols
Google says: "No".

>>34790944
Are you saying that if you had a cute sister you wouldn't fuck the shit out of her?

>>34794035
If you want to be pedantic, then most guns that are revolvers are also pistols, to the point that if some one is talking about their revolver or a revolver then chances are he is referring to a pistol.

>REEEE TANK DESTROYERS AREN'T TANKS

>>34790835
Thats makes no sense anon.

>>34791476
Thanks anon. Both look pretty fun but dcs looks complicated for sure, but i guess thats whats makes it great.

File: IMG_2274.jpg (65KB, 480x640px) Image search: [Google]

65KB, 480x640px

>>34780091
>ow the fug do i make sure the front sight gas block doesnt end up canted too???
i used this guide

http://acatholicmechanic.blogspot.com/2016/02/diy-a2-front-sight-base-install.html

>>34783154
FAMAE?

Whats a good rifle to take deer hunting?

File: vtg-polo-ralph-lauren-shooter-shirt-mens-l-padded-shoulder-hunting-shooting-4a207e5551730df8107a266efdba89c2.jpg (37KB, 500x500px) Image search: [Google]

37KB, 500x500px

Are shirts like this a meme?

File: 4567687.jpg (34KB, 825x425px) Image search: [Google]

34KB, 825x425px

>>34794423
Stands for "Chilean Army's Factories and Armories", a Chilean state owned manufacturer.
The SAF its a SMG based on the SIG-540, similar to what the MP-5 is to the G-3 family, the SAF is to the SIGs.

>>34794728
oh how fun it would be to own one of those as an SBR

>>34794732
They are pretty rare, but I heard a bunch of them got imported into Canada from all the places.

can anyone tell me about swiss ig11? google doesn't help much

>pic related

>>34793642
If the GIGN does it, it's good to me.

>>34794181
If you like jets but don't like the autism of DCS, you can try LockOn (it's the same engine but the systems are simpler).

>>34794782
any other free jet combat sims like dcs?

>>34794732
>>34794740

They absolutely did... Along with the 5.56 and 7.62 REALFUCKINPOTATO versions. I admit I wanted one hard but.... 3k (2k when they were first imported but those damn Chileans pulled a NOFAMAE FOR YOU!) for a blowback 9mm with shitty, chipping, expensive mags (100-135 for polymer mags that are a little under the first gen CZ Evo mags in quality) that to top it off are impossible to get. One of the importers has been promising expensive metal mags for the last 3 years. And to top it off they were stuck with 5 Rd mags...

hey guys retard here
I heard you can shoot anywhere on BLM lands but is BLM only in national park?
also does this mean I can shoot where ever in BLM lands as long as its away from people?

>>34794435
Ruger American
Savage Axis
Sako model 85
Tikka T3
CZ557

and many, many more.

>>34794990
>be me, east coast retard
>never even heard of blm land until a few years ago with that standoff with that rancher that wanted to let his cattle graze for free

I am not the person to answer your question but maybe someone else will.

Why is it that you don't see many striker fired guns with manual thumb safeties? Why are they almost exclusively just trigger safeties? Why is it you don't see hammer fired guns with trigger safeties? Is it just something about the designs of the gun s?

>>34792287
>some of us
You're one person, and obviously a shill.

>gouging and speculating nonsense
See above.

File: 1394078646545.jpg (307KB, 1024x768px) Image search: [Google]

307KB, 1024x768px

Are there guns that you'd buy if you where in Europe that you can't buy in the States?

>>34795945
Tiger. Not that we can't buy them in the states, but due to import restrictions they are priced out of my range now. Not sure where you can buy them in europe, but I know you can somewhere.

File: IMG_7705.jpg (21KB, 220x165px) Image search: [Google]

21KB, 220x165px

Is there any real advantage between the usp45 standard and the tactical model, besides the threaded barrel and adjustable sights? I want to get into the USP game but I haven't decided which one I want

>>34796001
Tactical has a nicer trigger as well as threaded barrel. Get the tactical if you can afford it.

>>34795716
Lol okay dude. You stay classy.

>>34791554
Keep the Mk23 desu, not worth giving that one up

I have a FN hi power, but when it's loaded and I rack the slide, the bullet doesn't eject. My 92fs etc does this without problem, is this gun fucked?

>>34796126
Can you see if it extracts, then gets pushed back in, or does it just stay in the chamber?
If it stays in the chamber, your extractor is possibly broken, or worn out of spec.
If it extracts, but then gets pushed back in, your extractor is OK but your ejector is broken.

Either way, should be repairable.

>>34775837
Couldn't they make more compact flash hider?

>>34791554

Out of curiosity sakes how much were you planning on getting out of the FAL and what kind is it?

>>34775837
Are Hi-Point carbines any good? I'm looking to get one in .45ACP for home defense.

>>34775837
Why are suppressors so goddamn expensive?

Is it best to wait and see if SHUSH/HPA pass before getting my first one?

>>34796602
they're usually precision machined parts that have to withstand a lot of abuse and still be concentric with the bore. if you have skill but no money you can always build one after playing mother-may-i with the ATF
>wait and see if SHUSH/HPA pass
lol

>>34796570
they're pretty solid. apparently you can convert 1911 magazines to fit the .45 version fairly easily.

Would anyone recommend using a CZ-82 for someone's first CCW?

>>34796570
I have the 9mm, zero issues. Loads of fun, cheap to shoot, and theoretically you can use it to hunt small deer at close range (at least in my state, you can use the .45. Not sure I'd want to though).

>>34796698
I've heard mixed things. Given this might be my first gun, I really am on the fence.

>"Ewww anon, a Hi Point?"
>"It's a good price point."
>"Ewww anon, don't you know how Hi Points handle?"

>>34796726
Any feeding issues? I've heard that's one of the main issues it has.

>>34796728
it's basically just sour grapes
>anon paid about 200 for a fun, functional firearm that's cheap to shoot and reliable
>i paid 700 for my rifle that bruises my shoulder and is finicky with ammo
>"y-you bought a hipoint? i heard those s-suck"

>>34796681
Suggestions on brands or where I can read up on em?

>>34796874
i can't offer any solid advice since i don't own any. Lurk the catalog for a NFA general and ask around. that being said, if you want to make your own look at
http://www.preppersdiscount.com/store/c3/Maglite_Adapters_.html
if you attach anything that reduces the sound of your gun firing without approved suppressor paperwork, you get to spend 10 years in club fed. not a lawyer, but i'm pretty sure you can serialize the tube and switch out baffles to play around with how effective it is
tldr lurk NFA general
don't put anything on your gun that quiets it without completed, approved paperwork

>>34797030
thanks, anon. Guess it's time to finally join arfcom

>>34794990
BLM lands are usually standalone out here, outside of national parks/forests/whatever

It's basically just extra state-owned land that isn't special enough for other designation, and sometimes has private ranches so watch out for those

General rule of thumb for shooting in BLM land is keep a couple hundred yards away (at least) from roads or any building, clean up your brass/shells, and have a decent fuckin backstop please

>>34797056
never mind, arfcom fucking banned free email providers. Shitheads. Lurking it is.

File: 1500587734435-k.jpg (113KB, 858x472px) Image search: [Google]

113KB, 858x472px

>>34775837
Does anybody have any experience with the CZ P09.

I was thinking about getting one because the idea of a polymer DA/SA appeals to me.

>>34779146
Decent knife

Hi /k/ you know when you get those shits where a fart comes out right afterwards and it sort of fires it out your ass? In a country/state/county/city/etc where air guns are regulated or banned would having such a shit get you in trouble, because you have basicly created an air gun? (firing an offensive projectile, aka the shit, out of a barrel, aka your asshole, using the action of compressed air or other gas, aka the fart).
Could this be used in a self defence situation in a place where you can't carry weapons? (you would be scared so it would be easy to shit) What diets would be good for fostering the best shit projectiles? (hard but smelling really bad) and at the same time encouraging farts to shoot them out your ass as and when needed?

File: 20170808_140715.jpg (1MB, 2560x1440px) Image search: [Google]

1MB, 2560x1440px

How much should I bid

>>34796225
It's a Colman R1. I'm not quite looking to get rid of it, but trading up always interests me. I have an AAC 7.62SD on the way, and I figured a SCAR would be a better host. I know the FAL will go well with it, but a SCAR is quite a bit shorter, lighter, and modular. It also has that neat suppressor setting on the gas block.

>>34797123
Go on /int/ and ask an Indian.

>>34797504
*Coonan, not Colman

File: 1502156977671.jpg (43KB, 500x507px) Image search: [Google]

43KB, 500x507px

Can I legally buy an AR-15 lower and parts kit through private sale at the age of 18? In Virginia btw.

>>34797539
In Virginia, you have to be 18 for """""assault""""" rifle purchases. No background check required for private sales. You're good to go.

>>34796760
I had one, but I attribute it to not being seated properly.

The mags sit flush with the bottom of the pistol grip, a lot of people don't slap them in all the way. I think that's a good part of it. The mags aren't super great. They werk, but the problem is they rust pretty easily. I have to WD40 them and wipe them off about once a year.

>>34796728
It was my first personal-rifle buy. It really, really isn't a bad decision. If you plan on hunting, a Savage Axis/scope combo isn't a bad alternative. If you just want a semi-auto plinker that can do out to 100 yards okay, Hipoints honestly are one of the best intro-to-gun deals out there. The alternative is waiting for a PSA sale on ARs or something and getting a flat-top AR for about $350-400.

>>34794859
There are STANAG conversion kits around, at least for the 5.56 one.

>>34797539
>>34797847
Please dont listen to this dude ^^

AR lowers are treated as pistols. Seeing as you could hypothetically convert it into a pistol.

Is 10mm at all noob friendly? Been looking to buy a pistol and I know it's a meme caliber but just curious on how viable it is for a first purchase.

>>34798595
Are you a big guy?

>>34777309
>fucking fascinating how a community dedicated to preserving freedomsticks at all costs would run and cry to the feds at the sound of too many pews
Preserving freedom in name only, most in the gun community, especially older fudds at the range would happily turn in any guns that would violate any laws, and be glad to turn on their own quickly. They arent as pro gun as you would like to think, and simply enjoy the sport or hunting

File: Bill_Wilson-0.jpg (79KB, 716x768px) Image search: [Google]

79KB, 716x768px

>>34798751
He's a big guy.