Does a gun with the following characteristics exist? >at least

>>34567455
AR 10 (or whatever AR .308 variant, could also go with 6.5 Creedmoor) shouldn't be too expensive.

>>34567455
yeah its a modern western 308 rifle.

>>34567485
Not really concerned about cost, I'm looking for something that has better durability and reliability than an AR10.

>>34567455
stop making threads and start doing more research on your own; the information is out there and easily accessible

none of this shit matters if you don't use the rifle enough to find out the rifling is gone at 6k rounds or whatever. most shooters don't ever experience end of life with modern firearms or even see the extent of their mechanical accuracy (especially in the field). to some extent you will have to find your own solution through trial and error, but by far the most significant improvement will come from practicing proper marksmanship and not from your rifle

my recommendation is to build an AR-10 to your own spec. consider basing your build on an aero or a mega receiver and work from there

>>34567497
MR308A3
>hard chromed barrel, HK-CHF patented technology
>up to 20 inch barrel
>sub MOA
>high durability
>auto-adjusting, patented gas-system
>very easy to clean
>OTB functionality

Galil ACE 308
>chrome lined CHF barrel
>1.5 MOA
>AK-Durability
>AK-Reliability

>>34567536
What piece of shit gun has shot rifling at 6k?

>>34567567
Every untreated barrel (FAL, SIG SAPR, etc.)

File: SR-25-E2-ACC-M-L0k_insideproductimage.jpg (35KB, 2000x630px) Image search: [Google]

35KB, 2000x630px

>>34567455
So... an SR-25?

>>34567567
A lot of high quality bolt guns with cut or button rifled barrels will get a new tube around that time. The barrel isn't "shot out" but past a certain point your groups will open up substantially.

I doubt you're going to experience this with .308 though.

>>34567590
>AR10
>durable/reliable
what?

>>34567638
>trying to explain the finer points of precision rifle shooting to retards
A valiant, but mistaken effort

i doubt you'll find a rifle like that OP, but you can get close to it if you look deep enough.

i would recomend an AR type rifle since the barrel is "easy" to change becasue you ahve to take in account what this anon said>>34567638
but if you are REALLY set for maximum rifle accuracy AND reliability, then get a bolt action

>>34567455

>inb4 a SCAR

MK20 SSR. If you don't think the SCAR-17 is accurate or reliable enough, and I don't know where you got that idea, this exists.

>>34567497
A quality AR10 will be more durable than a PTR while being a half MOA gun and 100% reliable.

Hell a basic bitch $900 DPMS G2 will be more reliable and as durable as a PTR.

a PTR 91?

>>34567552
>mr308
>sub MOA
Lol fuck no. They're a 2 MOA rifle.
>AK/Galil/other-AK-knockoff
>more reliable than most other semis
>especially in calibers with minimal case taper, such as .308
Stop believing 4chan memes, holy shit.

>>34567686
>memes
Fuck off

>>34567772
But that's not available outside of the military, is it?

>>34567782

>at least as accurate and long-range as an SR-25

>>34567781
>AR10 as durable/reliable as PTR
Are you memeing?

>>34568239

Sorry, misunderstood the question. I thought you were asking if it exists, not if you could have one. FN has said before they were going to release it to the civi market but it's yet to happen and I wouldn't count on it. The military is eating up all the ones that get produced and issuing them out.

24 inch AR10 in 6.5 mememoor

/tthread times 100. It is literally exactly what you're asking for.

>>34567455
Yeah, the SR-25

>>34567455
>durability/reliability
I can understand the accuracy concerns, but this one just tells me you have no idea what you're talking about.

>>34568325
What about putting a 20" barrel on a 17S? Is this doable and legal, and would it be about as good as the MK20 SSR?

>>34567686
BACK IN NAM MATTEL MADE OUR RIFLES AND THEY JAMMED EVERY ROUND I TELL YA WHAT

DIRECT IMPINGEMENT JUST DON'T WORK, BETTER FOR RELIABILITY IF YOU ADD MORE PARTS BY ADDING A PISTON FOR THE GAS TO IMPINGE UPON WHICH THEN IMPINGES ON THE BOLT

NONE OF THIS A SALT RY FILL CRAP MATTERS ANYWAY, I KEEP A TWELVE GAGE PUMP AT MY BED. JUST RACK THE PUMP AND ULL SCARE EM AWAY IS WHAT MY POPS TOLD ME

OLD PEOPLE KNOW SHIT BECAUSE THEIR OLD, UNDERSTAND?

>>34568411

the MK20 is just a 17s with a 2 stage trigger, a fancy stock, and a heavier, longer barrel. Yes, you could simply build one from aftermarket parts and a 17s.

File: 1497924176362.jpg (35KB, 463x489px) Image search: [Google]

35KB, 463x489px

>>34568389
This. The SR-25 is plenty durable.

>>34567455
if you want a scar with more range sell the stock 16" assembly and by the 20" LB since those are currently available. And I mean actual FNH 20" bbl assemblies not aftermarket versions from mom and pop shops. the additional 4" of bbl length will give you roughly 100-175fps depending on load.

You can buy aftermarket aluminum parts if the plastic parts do not suit your fancy and then you'd have 2nds in the event one item breaks for some reason.

>>34568411
it is doable and absolutely legal seeing as how FNH sells the assemblies. Check out MGW for the 20" FNH scar bbls along with extra parts for your scar.

>>34567686
As durable or reliable as an ar15, its just bigger you mong.

>>34568411
>>34569271
http://www.midwestgunworks.com/page/mgwi/prod/98818

only assembly you cannot keep in your possession until the paperwork clears is the 13" bbl unless you find some sort of muzzle brake or fh that brings the oal to 16.1" on the bbl when perm attached.

>>34569291
fuck off orangecat

>>34567686
Real world reliability > Internet trading card stats

>>34567825
Sssshhh OP can't shoot well enough to tell the difference anyway

>>34569291
>ar15
>durable/reliable
lol

PSG-1 or G3SG1 if you have the money, but they're also heavy

>>34567455
>.338
>semi auto
Your choices are:
Kivarii
That's it.

File: 1464799494741.jpg (82KB, 512x384px) Image search: [Google]

82KB, 512x384px

>semi auto
>30 caliber or better
>pinpoint accurate

aint gonna happen OP, and you'll waste thousands of dollars trying

get a bolt action and stop being a homo

File: 1449656789228.jpg (57KB, 709x538px) Image search: [Google]

57KB, 709x538px

>>34568423
>BACK IN NAM MATTEL MADE OUR RIFLES

File: lmt.jpg (71KB, 1023x612px) Image search: [Google]

71KB, 1023x612px

>>34567455
LMT MWS

>>34570488
Actually it does exist it's called .50 BMG :^)

>>34567455
MSG-90?
G3SG1?

>>34570267
>>34570634
>G3SG1
is that even available to civilians?

>>34570488
>what is Accuracy International AS50
>what is Barrett M82
>what is McMillan TAC-50

>>34570656
it might be called something else but yeah

>>34570656
>is that even available to civilians?
How much money do you have?
Less than 100 G3SG1 dealer samples made it into the country. I can sell you a semi auto one for $8,000

>>34570201
Yeah? What's better? An ak? LOL

File: 1481831838548.jpg (23KB, 512x288px) Image search: [Google]

23KB, 512x288px

Holy fucking shit OP you dumbfuck nigger
>"muh EXTREME reliability for muh EXTREME tactical LARP survival operations"
>muh 0.001 MOA shots cuz i'm such an operator"
the fuck you think you're gonna do with it? patrol around in afghanistan?

First, Not even real operators are this demanding like your sissy ass, they took their M110s and they were happy.

Second of all, "long range" isn't a adjective
and even if it was, you can't use "long range" and "accurate" interchangeably like a retard (M82A1 is long range but is nowhere near 'accurate')

Third, AR10 IS reliable (Probably more reliable than your shooting skills), you dumb fuck, what the fuck do you think it is, an airsoft rifle? or are you one of those mud test retards?

Fourth, i could probably throw the shittiest, most civvie, most commercial AR10 and you'd be very very satisfied with it, ya cunt.

So in other words, do whatever the fuck the guys told you in the thread, either buy an SR25 if you want to sped 4k dollars, or build your own extremely accurized AR10

>>34567552
>Galil ACE 308
>AK-Durability
>AK-Reliability
Shut the fuck up. I'm impossibly sick of explaining everything wrong with this abomination. It's just a series of terrible engineering decisions, go fucking Google it, never post again.

File: Coronation_street_spoiler_lloyd_mullaney_craig_charles_heart_attack_fun_run_hayley_cropper_illness-464875.jpg (29KB, 590x350px) Image search: [Google]

29KB, 590x350px

>>34569255
>20" OEM scar barrel assembly is $1150.00

>>34570880
a friend of mine bought a basic dpms ar-10 and I swear to god no matter who shot it and what ammo went through is, it shot minute-of-pie dish at only 50 yards

some guns just suck.

>>34570682
>implying they are better than the bolt action .50s

>>34570488
>get a bolt action and stop being a homo

Get a bolt action that actually has a recoil dampening bolt group without costing a premium and then we'll talk.

>>34570682
>Does anyone even KNOW the accuracy rating of the AS50?
>M82 being pinpoint accurate EVER.
>Bolt action

>>34571076
GET ME A FUCKING STRAIGHTPULL THEN.\
>inb4 blaser r8

>>34570439
there is kivaari, noreen, and mjolnir

>>34570919
scar has never been cheap, but you'd recoup some of the cost by selling the original 16" assembly. you could prolly sell the take off for 800 and ppl would buy it.

File: Dude.png (431KB, 401x450px) Image search: [Google]

431KB, 401x450px

>>34567497
>Better durability than an AR-10
>A fucking DMR

Kiddo....

>>34570944
Did you physically look at the barrel or take it the fuck back to where you got it? Because that is just downright impossible.

>>34570886
The Galil ACE is besically a sealed AK.

>>34568346
like nemo's new executive order with a prrof research carbon barrel? yesplz