Rail systems edition
Old >>34532273
>>34535583
So what do you all torque your castle nut to?
If you stake it, what kind of punch do you use?
>compm2 reaching pro prices
Does this mean I'll get more for my PRO then?
>>34535602
Till it's tight
>>34535583
till you hear the crack then back a quarter turn
>>34535602
vry tight then 1/8th a turn
staking is a meme
>>34535583
Went mlok myself.
>>34535608
It means people are idiots to pay the same price for tech 3 generations behind
>>34535602
>>34535619
oops that's a reply to that one
Now that I have a decent reflex sight, any recommendations for drills or just fun ways to shoot? Plinking at my local range is getting a bit dull.
>>34535583
>>34535602
Torque it until you slip off of the nut.
>>34535627
>decent
>>34535624
Block I clones are so hot right now. They are considered "retro."
>>34535583
Smooth MRP
>>34535602
Hand-tight.
Fingers crossed you don't slip or have the wrench seated wrong so it digs a furrow through the threads while you turn.
mfw that screeching aluminum sound
>>34535659
What about barrel nut?
>>34535667
40ft lbs
>>34535667
30ft/lbs minimum unless specified by a particular manufacturer
>>34535667
30-80 ft pounds unless specifically directed otherwise by the manufacturer.
>>34535638
People want what they lusted for in their childhood.
I still want to fuck Taylor Rain even though she's an mom and real estate agent now. Back when she was on coke the whole time, she was rail thing and had a rubber band anus.
I knew a girl like that who was a REAL GOOD TIME in college. Turns out she was coked out the whole time and barely remembers any of it. Blond, tall, hot, huge tits. She is now an elementary school teacher and gets angry at you if you use "bad language"
>>34535675
no wait i think i do 50
>>34535682
>140 foot pounds
>>34535624
Theres hardly a difference between pros and m2's anyway
>>34535630
>9 gorrilian pounds later...
>>34535698
oh it's a lot of fun when you have to go that high
The only real advancement in the rail systems market is the Hodge/Mega "wedge lock" rail
Gen 1. KAC
Gen 2. KAC FF, Larue, ARMS, Daniel Defense M4
Gen 3. Daniel Defense LITE, Geissele SMR (HK416 knockoff), Noveske NSR and monolithic uppers.
Gen 3.5. Current market, with everything being a knock off of a knockoff
Gen 4?: Wedge Lock.
>>34535630
I can't tell if this is shopped anymore.
>>34535682
>>34535678
>>34535675
My rail says 40 foot pounds but I cant get to the next gas tube hole without going past 40.
>>34535701
Refined ACET circuitry for improved battery life and a 2 MOA dot vs 4. Not much. I've had two people send me defective/shoddy M2s that they swore up and down were "100% reliable, functional condition"
I'm done with it, gonna get a PRO, to hell with clone autism.
>>34535667
Tight then next notch.
>using a torque wrench for barrel nut
>not doing it by feel
Newbs
I actually think the URX is pretty fantastic. The KAC Shim set and chart ACTUALLY WORKS, which I cannot say the same for just about every other shim set and chart out there.
>>34535682
>we forgot to design anti-rotational tabs so make it tight
>>34535742
I would rather not fuck up my barrel nut or upper
No-guns here. I want to build an AR-15 to look like some of the cool shit I see in these threads (optics, rail mounted light, shoulder strap). I don't want to spend more than $1k. Someone wanna help me get started?
>it's another "I know my guns are literally spotless but I swear I use them" thread
>it's another "let's drag 3 rifles into the woods to photograph them" thread
>it's another "no I didn't serve I won't die for the jews" thread
>it's another "so what if I live with my parents I have a $2500 optic" thread
>it's another "I hope hikers don't see me dressed in my operator cosplay and laugh again" thread
>it's another "I have a 1x optic on my 20" build because I'll need fast target acquisition when SHTF" thread
>it's another "let's pretend there's a difference between MLOK and Keymod" thread
>it's another "I've never kissed a woman but I have an AN/PEQ-15" thread
>it's another "mismatched FDE furniture because I'm too scared to paint it" thread
>it's another "i'm fat but my $300 plate carrier will give me an edge in the happening"
>>34535736
What rail is it?
Pics of nut?
The only times I've seen ONE number given are barrel nuts which do not have to be clocked to match the gas tube, such as Geissele.
>>34535755
Pic related is the anti-rotational tab.
>>34535755
Lmao
>>34535683
Wtf? She's a milf.
>>34535767
PSA lower. Whatever upper
>>34535771
Is this the new copypasta?
>>34535767
I'll sell you a cheap upper to start with, then just put a rail and lower on it :^
>>34535808
Dont buy this
>>34535728
>Gen 5: M4 RAS
Wedge lock is ugly as shit. Too bad since the engineering seems solid and being the few 7075 rails on the market.
>>34535777
Yeah, and ten years ago she was the hottest slut in the world. She basically helped brainwash a generation of kids into thinking anal was first base.
Gauge, Taylor Rain, Aurora Snow... the heroes of the 2000s.
I lusted for Taylor Rain much like I lusted for Larue FF rail systems. Now, Larue's KAC FF knock offs seem quaint.
>>34535583
God fucking damnit casv is hot.
Be my conscience:
Should I go to Wendy's for a baconator, have them add that new spicy queso sauce on it and get a pallet of those 50 cent frostys?
found one
>>34535828
heavy*
>>34535829
Yes
>>34535821
Really? I think it looks aesthetic as fuck, but looks are subjective.
Geissele gets all the love from USASOC, even though their rails are basically based on ancient, "borrowed" design from the 416.
Gotta hand it to big Bill, dude was able to leverage purely making the best triggers into a very successful business. The SMR is the most overrated rail on the market, its design bona fides are weaaaaaaaaak. Any asshole with a CNC could make that rail. Hell, the Cross Machine and Tool rail is a superior take on the same concept. Bill can't bash CMT for borrowing the design... since Bill did the same hahahaha
>>34535757
You're more likely to fuck it up with the wrench and over torqueing if your readings are wrong. So many varibles in "torque."
>assuming your made in China wrench is calibrated properly
>length of wrench handle
>angle attached to bblnut wrench if aftermarket rail
>type and amount of lubricant
>thread tolerances
Etc. Torque wrenches are a placebo, but nice to have I guess.
>>34535839
My CASV FAL is only 8oz
Anyone here go for the Wolf A1 Upper? Is it any good? Or do you feel like you feel for the piston-driven meme?
>>34535775
Did you not follow instructions? Or forgot it in there when you torqued?
>>34535808
I just want to start fresh. I don't like buying used if I don't have to.
>>34535878
Aero OEM
>>34535838
From where? How $?
>>34535755
Anti-rotational tabs are dumb. Any force strong enough to break 60 ft pounds on a barrel nut is strong enough to break the aluminum of an anti-rotational tab.
I think they are most a feel-good feature and not actually that useful.
>>34535861
Yes. It's okay. No. It's a reasonably quality upper for the price. Mostly. Some scabby bits, but given that it's complete (minus rear sight), it's not over-priced.
>>34535868
I didn't follow common sense; I tried to re-align the top rail from the zero-torque position without removing the gas tube first. So when I unthreaded it 1/16th turn, it gronched the tube.
whats the word on the atlas bipod?
>>34535891
Facebook $295
>>34535851
It's too plain.
>>34535944
Lel. I didn't know you can search and buy gun shit on fb. How? What about leddit?
>>34535957
fucking iphone
>>34535936
Money. Make sure you mount it in the middle of your rail
>>34535936
Good for dmr. Heavy for battle rifle. Very aesthetic though. Get it cheap from EE.
>>34535981
I like this
>>34535957
>>34535980
do i recognize you from arfcom?
>>34535981
>middle of rail
Reason?
>>34535981
>lw everything
>10lb md
>>34535988
Any other recommendations for quality bipods?
whats EE?
>>34536005
Finished it today
>>34535907
Many thanks! Look forward to purchasing it soon.
>>34536001
many /k/ommandos lurk on arfcom then come here to pretend they dont lurk on arfcom
>>34536065
I only buy and sell on EE
What's a good 4x optic that won't break the damn bank? Preferably a 4x with an RMR mount, but a 1x4 will do if I can't find a decent 4x.
>>34536047
Arfcom
>>34536065
>come to ar general
>pretend not to browse and use the oldest ar site on the internet
>>34536083
Yeah EE is where i spend most of my time but i also post on certian forums from time to time. The arfcom EE is probably the best place to scoop up used gear for cheap.
>>34536099
nice
>>34536092
Strike eagle 1-6.
>>34536092
whats ur budget??
>>34536047
Bt46 over bt10.
>>34536083
Same here, the EE is the only redeeming aspect of Barfcom. Between the elitist BS, fudd lore and HAM nazis you can at least catch a deal every now and then.
>>34536057
It's headed in a good direction. SBR when? Or at least that kit for those braces
>>34536099
Review the x24 nf pls
>>34536105
used to have the magpul rail covers decided to just go rail ladders, ditched the afg and swapped out the t1 for an mrds on a predator tactical mount shit is pretty aesthetic.
>>34536095
thanks
>>34536121
I would get the quick detach for sure.
>>34535976
Reddit has a buy/sell/trade but it sucks. Look up tactical gear on Facebook, should find a few groups
>>34536185
Do you post wtb on fb or troll around? How does it work?
>>34536145
Pros- only scope that this size that has 10x magnification ( that i know of)
-Not insanely heavy.
-glass quality is top notch at all magnification
-Decent eye releif
Cons- Eye box is not very good, its not really forgiving and compared to other by 24x scopes kinda has that toiled paper effect.
Ive only had a few range sessions with it but so far aside from the shitty eye box its pretty good.
>>34536185
stop trying to entice him merchant!!!
>>34536112
600
>>34535755
>can't into proper timing
those who rely on anti-rotational tabs are either women or gays
>>34536213
That's why you go x32
>>34536253
strike eagle, PST on the lower end. Accupower 1-4 or tr24. Probably find em for super cheap on the EE and you will have enough for a decent scope mount.
>>34535602
Snug + 1/8 of a turn. Blue Loctite.
Is it best to build or buy your first AR?
I have a couple bolt action guns (a R700 .308 and a 'sporterized' 303 Enfield) as well as an old R870 I got from my grandfather but I was thinking of an AR just to be a range queen. Decent-ish 223 is cheaper to shoot than okay-ish 308 and a decent AR is reasonably priced, reliable, accurate and controllable if a friend wants to put some rounds through it.
>nearly $300 for a quad
No ragrets.
>>34536253
Steiner P4Xi. Check on Botach for the one with the included throw lever.
>>34536276
you aint lying
>>34536364
another good option. this guy fucks
RMR on top of TA31 or canted?
>>34536301
I'd say building it would be better. You're probably going to save a some money and you have free reign to choose whatever goes on it as well.
You'll also feel very accomplished once it's done granted you're not building a piece of shit.
>>34536490
Botg
>>34536316
what did you do
>>34536316
Is it worth getting the Larue mount for a TA31?
Not a big fan of the stock one, I found that it'll get loose around every 1,000 rounds, even if I tighten the fuck out of the screws.
>>34536490
Top, 45 cant, and opposite 90 for max oper8r
>>34536543
Don't talk to him
>>34536546
Got just the nods to use
FRIENDLYANON
I need you to convince me to not buy an A3, fit it in a futuristic-blue USR stock set, and have pjinvestments mount a CQC rail front end to it, rather spending all the money that would take on a Mk 12 mod 0 build.
Also, any reason I shouldn't get an A3 nato rather than a normal one?
>>34536617
>>34536545
Yes, it's aesthetic and has great RTZ. Also if you pair it with a KAC BUIS it's FUCKING TIGHT.
>>34536558
Don't tell him what to do you cretin.
>>34536617
Well, what do you want more, a rifle or a fish?
>>34536565
My god it's full of intensifiers...
>>34536634
>>34535755
>URX4
Go ahead and tell me how it's anti rotation tabs will work
>>34536656
No thanks
>>34536634
Do you know if they make FDE versions of the mount? I need to quell my autism.
>>34536723
Spray your own.
Just got my first AR, pic related. I really wanted an A1 style upper but got a great deal on this. Are there cool/retro looking builds for A2 carbines? Right now im thinking of slapping some wood furniture on there and slowly building up a full length A1 upper with wood as well.
>>34536812
>Right now im thinking of slapping some wood furniture on there and slowly building up a full length A1 upper with wood as well.
What the fuck
>>34536812
You must live in Maryland
>>34536812
>retro
>wood
ARs never had wood furniture faggot gay, go find some milsurpshit general to post in
>muh Fallout New Vegas
>muh service rifle
kys yourself
>>34536825
dingdingding
>>34536865
its one or the other
>>34536865
patrolling the mohave I see
>>34536865
r-r-respect the b-bear!
>>34536975
Cuck faction
>>34536975
I said kys you'reself
>>34536185
Anon seems to have taken a liking to this picture senpai.
>>34534911
>>34536975
Profligates like you belong on a cross
>>34536998
you guys still good for the 25th? about to buy the shit if so
>>34537037
Yes
>>34536998
Independent New Vegas the best vegas
>>34537002
l-l-legion w-watch out!
>>34537037
Yes
Why is this little dingus so long?
I don't like et.
>>34537074
there's a goldilocks zone when it comes to mag releases. that is clearly outside it.
>>34536617
Do the AUG
>>34537074
how do you like your ppq? i was mirin a two tone at the lgs
>>34537074
Dremel it to a gen 4 release
Also dremel down the corners
>>34537074
What is that some 80percentshit? I mean, it should be self-explanatory
Built a few of these with 4th of july sales.
PSA nitride 16 inch 1/8 Midlength upper.
Nitride BCG and tactical CH.
Milspec 6 position lower (low-shelf).
Came out to $350. Also came with a few gimmicky extras and an American flag dust cover with mounting hardware I'll probably never install.
>>34536617
Have you ever shot an AUG? They balance and point best when you don't strap a bunch of shit to the front end. The A3 with a 16" barrel is already an 8lb rifle and you want to add even more material to the front end for rails that you'll never actually use and 2 inches to the barrel to facilitate this?
There's a reason Steyr never took them past prototype. It's your money, but I've shot one of those "CQC" builds before and bought a regular A3 M1 instead based on that experience.
>>34537004
What light is that? M951?
>>34537118
>Built a few of these
Why. You could have built one thing of much higher quality.
>>34536617
>>34536628
I can't endorse the cqb kit, but I do hear it's heavy.
>>34537141
Bro don't worry about my money I'm literally building and buying guns every week.
It was a good deal so I built one for a beater and one to trade. Its fun for me to play with and own lots of guns. I'm not going to just own one.
>>34537084
I don't understand the product. It comes straight out, rather than being angled or swept back. If your thumb can reach the tip, then your thumb could reach a normal size one too. At least they are only like $3.
>>34537109
Never heard of a two tone PPQ, you sure it wasn't a CCP?
>>34537112
I am going to have to cut the corners if I keep this one because it digs into my finger held wrong-handed.
>>34537113
80% frame with Glock factory parts
>>34537190
>>34537109
Oh also PPQ is excellent, like super-rad tier. One of the top five factory triggers of all human time on this realm.
Great grip feel, paddle release GOAT, adjustable sights, reliable clips. The only place Walther has fallen behind is grip texture, PPQs like P99s are SLICK. They really need to do a texture like the M&P 2.0.
Also $100 off. Like you'd be pretty stupid to not buy a PPQ RIGHT NOW today.
http://www.waltherarms.com/rebate100/
>>34537131
I don't know. That's Psi's rifle. You'll have to ask him.
>>34537223
Not welcome. Bye, taco tits. Once fat, always fat.
>I've lost weight now and blah blah colt python I have money
Money can't buy the years of your life you've already lost back.
>>34537190
i swear it was a ppq. ill be back on saturday so ill look again.
>>34537223
>223
Still, no thanks
>>34537253
Never heard of a factory two tone PPQ though I know there are some people who have had them chromed or painted. I checked and can't find a sku for different colors, so I'd be wary. >>34537239
>>34537223
No thanks
>>34537239
But I want the new CZ pistol
>>34537269
Plebian
>>34537239
>>34537265
ya ill look closer when i go back.
>>34537269
that or ppq will be my next gun
>>34537239
How good is the P99 really. I've always wanted one for that bond aesthetic
>>34537269
why
>>34537277
ppq is leagues better
Sup fags
Recently got my first AR, lower came with the base MOE stock which I hate and noticeably wobbles.
Currently deciding between the MFT battlelink or MOE SL stock which do you autists think is better?
>>34537274
>>34537280
Walters are for child molesters
>>34537309
good thing he's looking at a waltHer
>>34537306
SOPMOD
N1
Waffle
BCM
Literally anything else
>>34537309
Walter does sound like a molester name
>>34537280
Looks neat, takes cz-75 mags and fits in a g19 holster.
>>34537265
>knock off HK
No thanks
>>34537131
M952V
>>34537269
Apart from the rebate I see no reason not to get a P10 instead.
But if you sidestep the Walther rebate to pay full price on a P10, that's pretty dumb.
>>34537280
GREAT single action trigger (it's identical to the PPQ trigger), okay double action trigger but long, some people don't like (or don't understand) the AS trigger. P99 is still the only DA/SA striker I've heard of. I love DA/SA so I have a permaboner for P99s.
The frame is rather slippery. The PPQ fixed some of that with pubetex but it's too slippery too imo. The P99 slide, while not exactly slick, is not as easy to get a hold of as other pistols like the FNS, VP9 or BLOCK. Those """"""""""features"""""""""" are good for carry but not good for MUH COMBAT. I have not had a problem holding, shooting and manipulating a P99. But I like advents like rough grip texture, chunky slide serrations and proper grip inserts like M&P uses.
>>34535701
kind of like removing that alpha nut.
>>34537223
>dr8co
>not dr8c0
Get the fuck out
>>>anon thinks there's no difference between keymod and mlok
http://soldiersystems.net/2017/05/05/details-on-the-ussocom-sponsored-keymod-vs-m-lok-test-conducted-at-nswc-crane/
>>34537355
Walthers are gay tho CZs aren't.
>>34537355
Sounds like something griptape can fix easy. Can I get an official sips/10 too? Thx burto
>>34537331
Meh. I'm sorta set on either a baby HK or a 229 for my next handgat
>>34537396
Sigs are great, get one or many.
>>34537415
No thanks
>>34537426
The FNX is enough bore axis for me desu, and there's no other sigs I really care for besides the 228/229. I wish there was a good DA/SA handgun with major aftermarket support that wasn't the M9
>>34537415
>GT dumped glock for CZ
still trash taste in guns, but better than what you had
https://www.youtube.com/watch?v=VSrLw_Dndhw&t=5s
>>34537456
CZ, HK. What type of aftermarket?
>>34537223
Prove it.
>>34537505
Just gucci type shit like you can do with the Glock. It's the only reason I keep thinking about finding a glock frame that isn't total garbage
>>34537396
Oh yeah good point, Talon grips on a P99 or PPQ would be killer. I just don't want to spoil the looks on my toy guns for looking at and posting on the internet. Got Talons on my pocko blasty tho.
>>34537395
Prove it objectively.
>>34537509
Hey so I heard your A1 barrel isn't clone correct
>>34537540
You're that proof
>>34537415
Have you used the Roland in theater yet?
>>34537487
nice foam roller, nerd
>>34537540
Nice stipple who did that??
>>34537542
>nds upper
>>34537540
Do it for me Papa Burrito
>>34537534
Nothing compares to the glock aftermarket.
>>34537556
https://www.youtube.com/watch?v=Wu9QBn9i4EQ
>>34537542
Oh yeah it's totally missing some tiny letter stamps on it.
I also went so far as to not have an actual Colt A1 lower.
>>34537545
What now?
>>34536057
She a qt anon
Wife's gone to watch neice and nephew for the night. Home alone.
What do I do?
Stop by local powder shop, spending the night handloading. Feels fucking awesome
>>34537632
Great now everything is gay. Thanks no thanks Burt :(
>>34537594
>Oh yeah it's totally missing some tiny letter stamps on it.
>>34537415
Jesus that's ugly. Haven't you heard? We block 1.5 now.
>>34537718
You could always buy a Bere-oops
>>34537705
Hit up Backpage for a prostitute and have fun.
>>34537174
Not him but I agree with him.
However I like your attitude.
Carry on, you're alright.
>>34537355
You have too many Walthers, thus your opinion is way to biased.
>>34537734
More fun to fuck a whore with the wife
This is way too much fun, its not an AR but you guys need to know
>>34537733
Beretta is turbogay
>>34537750
It's not all that
>>34537750
Thanks Burt
>>34537748
You don't have to say your wife twice.
>>34537766
Put a can on it and your opinion will change significantly
>>34537743
>biased
No, it just means his opinion is shit. Real people don't own Walthers, much less a dozen+.
>>34535829
>setting up and taking pictures like this
I picture you as being deeply and profoundly alone.
>>34537748
Get one for when she comes back
>>34537779
It's still in jail
>>34537750
>Not a kac can
You wasted your money senpai
>>34537785
No Burt is married.
>>34537792
>implying its going on just the mark23
>implying I could lift the KAC can
>>34537792
>25 year old baffle tech
Lolno
>>34537807
bruh
bruh muh clones
>>34537815
Im also never buying a LAM for it
:^)
>>34537807
>>34537815
If you were to own a retro car, would you put a modern engine in it?
>50 year old engine tech
>>34537829
I've wanted to get an old coach car and put a modern engine in it, yes
>>34537826
>not spending 1100 on an outdated light
I bet you don't even smash rocks for money
>>34537829
Depends on the car desu
>>34537829
Get a Foxbody Mustang. Put a SBC in it. Run 11s at the track.
>>34536364
This is probably what I'm going to go with. It seems like a good deal, and has the features I want.
is $250 for a comp 2 a good price?
>>34537875
Meh. I paid 260 for a PRO and a matech :^
>>34537784
>cant even count
I'm not surprised lol
>>34537743
You would therefore trust someone who owns no Walthers over someone who owns several? Certainly you wouldn't trust someone who owns ONE SINGLE UNIT of a gun you were interested in? That would be scientifically unsound.
>>34537750
>let's touch end caps
>no homo though
>>34537885
PRO isn't clone correct
I want to sell all my guns except my glock 19 and build a gaming pc
>>34537943
Sounds like you don't actually like guns
>>34537415
daddy??
>>34537943
Are you 14?
>>34537927
Who cares, its better in every way. Enjoy the wires inside the switch cap coming loose as the silicon sealant corrodes. You knew that was a problem before you started shopping 20 year old red dots, right?
>>34537943
porque no los dos nigger
>>34537917
>BD date code
>Octane
Keep it up bud
>>34537943
If its not a thread ripper you're probably a shitlord
>>34537955
B-but then it isn't a real block 1 :(
Do you guys put nail polish on your front sight or is that a meme?
>>34537973
>using your irons
lol
>>34537981
Cant afford the scope I want right now so I am stuck with irons.
>>34537970
Its not a real block 1 without a fa m4 lower so you've already blown it
post real men guns
>>34538009
?
>>34537875
Where? What condition?
>>34538009
>>34538009
>>34538018
good condition with killflash and scope cover
>>34538032
Is there a picture of it with the dot on
>>34538047
yes
>>34538014
>>34537943
Hi fluffy
>>34538132
good call
Guys fuck I think I may have eaten something bad, I keep ripping huge ass farts that make my eyes water
>>34538151
That's as gross as your rifle looks
>>34538157
"Pistol"
>>34538157
Its a pistol breh
What is the best type of hollowpoint against cockroaches
Little buggers are invading my house
>>34538196
Try not being filthy
>>34538176
>>34538180
shut up
>>34538196
pic related
>>34538151
Services you right for gay clone meming
sorry.
Sorry for your discomfort.
How do i sell an upper and lower receiver, unbuilt, just the upper and lower themselves?
I sort of want to SBR a forged milspec looking lower since my current one is so ricer looking. Should I buy an OLT m4 marked one and file on it?
>>34538196
I glue .177 cal pellets to 22lr ramset blanks. They get going pretty fucking quick
Anyone notice bar-fcum defends "dealers" even if they act unprofessional?
>>34538209
Blame the people living next to me
>>34538264
Move
>>34538151
If you don't mind, how much was your ras? What condition?
>>34538240
Do one of your 80s and get it engraved with some shit?
>>34538276
Working on it
August
>>34538277
Practically brand new, full panel and vfg kit, $175
>>34538009
>>34538301
git
>>34538243
Gotta protect that advertising cash flow
>>34538134
I didn't give you permission to respond to my post
>>34538323
Only one thats not trash is second up from bottom
>>34538278
All of them are already customized
>>34538323
>>34538301
Someone say battle rifles?
Key-Mod for the win
>>34538343
>>34538278
"Custom" lowers, rare
>>34538340
ikr
whats going on in this thread
>>34538358
Why did you spraypaint them silver?
>>34538367
Who's that redneck?
>>34538371
Shitposting, same as every thread.
>>34538390
no clue
>>34538371
pls respond
>>34538390
that theres a fuddster
>>34538367
Holy fucking fudd
>>34538358
>>34538343
>4 blank lowers
>already customized
explain
>>34538367
Excellent photoshop
>>34538414
You've done better.
>>34538439
i disagree, imagine that
>>34538445
Cordon and OC think their rifles look good too. Imagine that.
>>34538390
somehow i feel like i know him
>>34538478
your rifles are shit tho
>>34538495
rip greenie
>>34538495
*you're
I gucci'd up my rifle today with a new barrel and rail, should I post pics with my shit phone camera or wait until tomorrow when I can borrow a friends decent camera?
>>34538495
*thot
>>34538529
yes
>>34538482
you a wafag?
>>34538529
Post now
>>34538539
That's Baileyanon
>>34538558
im much fatter than witcher
>>34538533
>>34538541
you asked for it. While I'm waiting on my slow ass phone, here's what she looked like before.
>>34538577
So witcher is a skelly?or are you just a PorkButt?
>>34538533
>>34538541
>>34538614
and here she is now
be careful who you call ugly in middle school
>>34538614
y
>>34538614
Not the worst/10
>>34538628
I got the upper for really cheap, it was always a placeholder
>>34538627
Decent turnaround
>>34538623
witcher is skelly and im a little chubby. just dropped below 200 tho so we are all gonna make it.
>>34538651
>>34538651
RIP
I am 162
>>34538702
Post height
>>34538651
How tall are you? I've just began to assume everyone is /arg/ is actually skelly unless proven otherwise
>>34538627
looks good. how do you like the mk14
>>34538728
First impressions are very good. It fits well in my hand and puts the weight back pretty far. Install was easy too. I tried the MK8 and MK4 before and didn't like how bumpy they were, the MK14 doesn't have that problem at all.
>>34538718
6'
>>34538777
Height requirement accepted, you can come shooting with FA and I.
WGWS has to wait in the car
>>34538759
mk13/14 is more tubular than the mk4/8 yeah?
>>34538794
when will they learn?
>>34538801
a lot more. The diameter is smaller, too. It feels like a KMR with how smol it is.
Burt
New thread
Make it snappy
>>34538794
>starting lolocaustV2 in your car
Neat
>>34538298
Nice. EE? How long ago?
>>34538794
By my math he's something like 52", how is this possible?
>>34538830
i think its meant to be the block III rail. especially since it popped up in this pic
>>34538414
When's your Cult coming in?
>>34538868
>this pic
Who cares what airsofters are putting on rifles?
>>34538870
supposed to come tuesday, vendor took their sweet time getting it shipped
Why do Colt socoms come with troy quads? Is Colt poor or something?
>>34538896
bill go to bed
>>34538715
high end manlet, 5'9
>>34538922
ob pls
>>34538627
>dat barrel nut area
Guyslee fucked up
>>34537037
Good cowboy shit right there
>>34538794
u better be pushin 250 or higher on bench with a wingspan like that
>>34535936
Sucks. All the serious long range folks use Harris now. It was great when it was new, but it really doesn't hold up. Instead of asking /k/ ask any dedicated LR group or forum.