a friend gave me this old rusty flare gun...
I decided to build an adapter to shoot .22lr
but why just one bullet of .22lr...
...if you can have SEVEN at the same time?
so, what do you think?
>>34009330
It's pretty neato senpai. Have you tested it yet?
>>34009330
I like it a lot.
>>34009330
isn't that considered a MG by the ATF?
>>34009376
Salvo fire is fine.
His doggo is safe.
Make a vid of you firing it and post the link
>>34009411
Are they smoothbore? If not, that's an AOW.
>>34009330
Very nice
>>34009330
well... go pop a raccoon or something with it and post results
So you made a .22lr pepperbox instead of buying a .22lr single shot adapter.....
Have you tested it out? Don't tell me you just drilled a single size hole for the barrel, it's gonna be inaccurate as fuck, did you add rifling too?
Also this is just me but I think the base plate with the firing pins could be done WAY thinner to save on weight, and firing pins could be a bit better than just wedges
>>34009261
Make multiples of those adapters for quick loads.
Can't you make the adapter longer to help the bullets get some gas in their ass?
>>34009490
>wedges
I just don't see how that matters. If it works and is robust, wut?
>>34009330
>>34009313
I think it's neat, but I think also the ATF might determine this to be an NFA item, they've been called Machineguns, Destructive Devices, and Any Other Weapons.
There's also similar setups which they have determined not to be any kind of specially regulated item.
>>34009474
You got it backwards, smoothbore handguns are AOWs, rifled ones are not.
I do hope OP rifled it though.
>>34009490
Wedges work, it's how open bolt .22's work
Post shooting videos or results pls
>>34009490
I drilled and reamed those barrel holes.. . Srsly, what kind of accuracy should I achieve with a pepperbox "shotgun" style gun with no sights or whatsoever???
It's just for fun, I got other stuff for precision shooting!
>>34009531
Nope it would be salvo fire. I would add "rifling" to be safe though.
I love this place.
>Post shooting vids n pics plz.
>>34009313
>>34009317
>>34009330
>>34009330
Thats awesome good job anon.
Post ballistic gel tests with it and some boutique .22 ammo.
>>34009499
Smart.
Like revolver speedloaders
>>34009814
you can get 3d printed sight mounts on ebay, neat project, closest i've done is drilled an fal stub to take 7.62x38 and glued it into a spent flare case.
>>34010158
Segmented would be bitchin on a highspeed with some clear gel.
>>34010211
https://www.youtube.com/watch?v=BBadBED7cIg
Like this but seven times and in good lighting on clear gel.
Do it for science OP!
>>34010211
i can never find any segmented, and i pride myself on scrounging things up. but op does seem cooler than me, so maybe...
>>34009261
>>34009300
>>34009313
>>34009317
>>34009330
What tools and material did you use op?
Load it with shot loads and see how it patterns on a large sheet of paper
OP hasn't posted results yet, either the ATF got to him or something went terribly wrong
>>34011451
Good night sweet prince.
>>34011451
I need the source for that image.
>>34009330
I would be surprised if it works.
It looks like the impact of the hammer would be too weak to distribute over all 7 rounds and still fire.
They make something similar for grenade launchers, but they use a shotgun primer to actuate secondary pring pins that set off all the .22 rounds.
>>34011575
firing pins*
>>34011483
I don't have a pixiv account so I can't search that site, but I can give ya the keywords to search for.
>>34011575
He could always put a stronger mainspring in.
>>34009261
Pic related OP
SOON
>>34011483
I got you, but it hasn't been translated yet
https://nhentai.net/g/191945/
>>34009330
is this stainless steel? then good job.
is it aluminium? then in the bin it goes.
>>34013912
>is it aluminium? then in the bin it goes.
Moron.
Bump for bloody pulp hand.
Haha anon probably shot himself when he closed it.
There is no clearance for the firing pins to sit against the rims when it is closed.
>>34014102
>There is no clearance for the firing pins to sit against the rims when it is closed.
...wut?
The second pic shows that's wrong though.
OP here
I made a mistake and made the firing pins too long, the cartridges explode into the space between the barrels and the firing plate... I have to make a new firing plate and maybe get a new spring because not all seven work but only 3 or 4... or maybe the reason only three or four work is because as soon as one explodes it pushes away the trigger plate... I don't know... further testing has to be done
>>34014368
You can't just grind the pins down a fraction?
>>34014376
no because then the whole plate would be too short...
also pic related lel
>>34014393
>no because then the whole plate would be too short
But if you did, then you might have enough room to put in something like a small concave strike plate, which could distribute the force of the hammer strike more evenly across the firing plate.
But I'm not an engineer, so I could be just talking out my arse.
>>34013912
I made it from wood and painted it silver
derp derp derp
>>34011784
I probably will try to weaken the firing pin spring first because I noticed that one is pretty hard
>>34010533
I actually used a CNC machine, mostly used carbide drills and milling cutters and reamed the chambers and barrels with a .22lr finishing reamer... also I used tool grade steel
pic was the result of the first test shot, only 3 fired... but hey... 3 is still better than 1, am I right?
>>34014422
Exciting results. Can't wait to see the missing fingers. We are all watching OP.
>>34014102
>>34014102
anon called it :O
>>34014453
No he didn't... OP had enough clearance, but there was too much space between the firing pin and the case head, resulting in the case not having enough support.
>>34014453
If there was no clearance for the firing pins I would be able to grind them down...
I wish there was no clearance!
>>34014465
>the firing pin
*The base of the firing pin, that is.
>>34009330
Its America incarnate.
You got any dogs?
>>34009490
>>34013912
>>34014102
dude fucking kys
>>34014446
>missing fingers
tell me one possible scenario where this would result in missing fingers.
I just made a high quality webm for you
check it out
>>34014669
...Hell's that?
>>34014681
Dildo launching maybe? That image of a dildo firing flare gun has been around for ages but afaik nobody released video of it until now.
>>34014698
Even at a blur, that is clearly not a dildo.
>>34014669
I can hear the "thoop" in my head
I want one
what programm should I use for better quality webms?
also does /k/ really not allow sound in webms? because I always get an error...
pic not related its just my .50 Action Eagle
>>34016063
/k/ does not allow audio with webms. You should post it on /wsg/, or on /gif/ if you want the complementary fap material
>>34014393
you're doing quality research
>>34016063
Hey there new friend
>>34016063
Just lurk more kid and you'll never (ever) go places but learn a lot about differentiating doujins by their drawing style.
Hey, just re-mount it in your jig and make some counter bores for the rims to sit in.
You could make a second back plate that holds the firing pins
>>34016977
made me chuckle
>>34009330
>>34011483
oh i got it off some Konosuba fan art a while back i don't remember where
>>34014368
pics plez