Look at this shit

>>33963887
Who made the handguard?

>>33963887
Tell us who made it so we can laugh at how poor you are.

>>33963887
Awww, are you sad that the bargain basement optic you will put on that bargain basement AR build will be out of alignment by 1/16th of an asperger?

Poor widdle guy,

Utg of course boyz

And I'm sorry richfags. We can't all get a monthly stipend from uncle Sam for being mentally handicapped. So yeah it was 100 bucks. Worth a try. Looks like I'm going with aero enhanced anyways.

>>33964026
Just buy Midwest Industries

>>33964026
Kill them in the reviews. Tear them apart. Review it as best you can. Email them and demand a refund.

Is this an AR10 thing?

>>33963887
what is a "high Profile Receiver", like is the rail on top higher than a milspec one?

File: IMG_6772.gif (2MB, 680x603px) Image search: [Google]

2MB, 680x603px

>>33964026
>cost $100
Why didn't you just save up the extra $50 for something that doesn't suck?

Do you think people are meming when they say you get what you pay for? Also why would you post this on /k/ if you didn't want to get made fun of? You deserve to be made fun of for this.

>>33964002

Shut up, Zed. You're making to much sense.

>>33964002
I thought this guy was in prison for kiddy diddlin'

>>33964026
>hurr ur mentally handicapped
>buys UTG

Pottery

>>33964151
Regular UTG stuff is fine. The UTG Pro stuff is the shit sandwich

>>33964155
>Regular UTG stuff is fine
Compared to what? Legos and duct tape?

>>33963887
why do you need rails anyway? just use iron sights like we used to before all this electricity sights

>>33964155
Is it? Because the OP image leads me to believe it's tip top garbage.

>>33964026
Ahhh, sorry Anon. I was just bein' an asshole.
For $100, yeah, it was worth a shot. Still and all, any company worth their salt could have fucking fit it better than that. This isn't woodworking, it's machined aluminum. 1/16th of an inch is only acceptable where they use brown preteen children to run the machines.

I think >>33964063
Is right. Post that pic and rip them apart. You'll probably get a new part (one that fits) and that company will be less likely to push that bullshit off, therefore helping other gun people like you.

>>33964063
I plan on it. And yes.

>>33964086
Figured I would try it out. Not really concerned about being made fun of by people I'll never meet. Is pretty lame to have to put the build on hold while I return it though. Thanks for your input anon.

>>33964082
Both are supposed to be high profile. Rail is obviously for low profile.

>>33964059
Looked into it. But don't really want to spend 250$ on a 10" rail

>>33964002
Not sad dad. A little upset that they advertise their product to fit a specific receiver that it doesn't actually fit.

>>33964199
Because I want one. I have a buis but will still be mounting an optic and anything else I want.

>>33964228
>A little upset that they advertise their product to fit a specific receiver that it doesn't actually fit.
I would be too. Cheap or no, that's bullshit.

>>33964257
fuck you faggot

>>33963887
Chyna makes better shit than this

>>33964297
It is China's finest

File: 20170513_142235.jpg (3MB, 4032x3024px) Image search: [Google]

3MB, 4032x3024px

>>33964257
It's just bad business. I'll call them tomorrow to have it returned

I think will be going with the aero enhanced m5 handguard. On their website they show a 9" rail but I haven't seen it anywhere else. Im putting together a 10.5 308 pistol build so I need a shorter handguard. Can anyone verify this or know of a 8-10" keymod <200 for a poorfag

Also check out this sick epc that I got.

>>33964352
>10.5 308 pistol build
Why do you hate you're eardrums anon?

>>33964397
They have heard things that they need to unhear. Also because it will be. . . Interesting

>>33964026
Get a refund and spend the extra $50 or whatever for an MI handguard. I get the need to save money where you can, but there's a bottom limit dude.

>>33964483
Put a brake on it. Do it for the memes.

>>33964281
He actually wasn't a faggot in that post.

I know it's Zed, but it happens.

>>33963887
Every company bullshits in their marketing wank.

>>33963887
>Plug and play!!!
>Legos for grown men!!!

Yeah right. I've gotten enough out of spec parts and mismatched colors to never want to assemble my own AR again.

Is UTG bad?

I read positive reviews so i purchased a rear UTG sight for mah AR

>>33964026
>$100
>Worth a try. Looks like I'm going with aero enhanced anyways.
>I'm sorry richfags. We can't all get a monthly stipend from uncle Sam for being mentally handicapped.

So let me get this straight:
You blew $100 on a cheap shit handguard that does not have good reputable record, get fucked on your gamble, and now you're going to pay another $125 for an Aero.
So you spent $225~ and the time dedicated to this whole situation, then proceed to go on damage control about "richfags" who pay $250~ for a good handguard the first time around.

Are you a fucking retard?

>>33964746
UTG is half a step above airsoft.

>>33964820
you do realize he can return the UTG and get his money back for it right?

>>33964616

Thank you for saying this.

I fucking hate the DIY crowd here, in ARGs specifically. Just buy stock and build up what you want. There's enough variety in base models that it's literally stupid not to, unless you're jewing every single penny you can out of it.

>AR556 is the best entry level 1:8. Prove me wrong niggers.

>>33964839

And it's that attitude that makes me proud to rock it when I can.

>3-12x scope has survived more drops and bangs than I want to admit.
>Forend is probably the strongest plastic on my gun
>AK over-the-dust-cover rail is rock solid and legitimately impressed me

>>33964908
whatever justifies your decisions, I guess.

>>33964820
Returning the rail.
Aero enhanced is 150
Thanks for your input anon

File: WP_20170513_004[1].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>33964026
>Buy a cheap, dogshit rail
>It fits like cheap dogshit
Absolutely shocking.

File: WP_20170514_008[1].jpg (2MB, 3072x1728px) Image search: [Google]

2MB, 3072x1728px

>>33964616
It's pretty easy to make your own quality build from the ground up if you're not a complete inbred who has no ability whatsoever to do research and/or isn't a cheap cunt, but I can see why this might be an issue for many anons like yourself.

>>33964616
building a rifle isn't too tough as long as you follow a few simple rules,
1. match your upper and lower by manufacturer
2. buy from well-established companies
3. use a good barrel
4. read customer reviews

>>33964059
or YHM

File: 1494620825511.jpg (11KB, 328x277px) Image search: [Google]

11KB, 328x277px

>>33964026
>Pay for bottom bin crap.
>Get punished for it.

>>33964199
that's retarded, why need shiny bang stick why not normal stick like we used before all this gunpowder and metal

>>33965010
Wat optic, that glass is noice

I'm not a right at either but I have learned a valuable lesson in my life.
Buy once, cry once.
Cheap shit always costs more in the long run.

>>33964352
Looks like a normal epc whats sick about it?

>>33964228
lol I got a full MI mlok upper for $250 from PSA

>>33965134
Scratched to shit. Custom lightening engraving

>>33965010
"Good build":
>Match upper and lower by manufacturer
>buy good barrel designed for What you intend to use it for
>bcg, buffer tube/spring, ect determined by gas length

You realize "building" an AR is fucking retarded right? I could understand buying an AR then putting a trigger or new barrel on it but jesus christ you "build" fags are retarded. Its not a "build" like building a smallblock, the parts are all interchangable and incompatable parts wont even fit together and on top of that, good builds are all mostly parts matched by manufacturer anyway. Nothing is "custom" or "built" about your AR. I can throw a trigger in my FN15 and it would outperform your "build" in every aspect but memefaggotry.

>>33965199
I keked. You win anon.

>>33965228
did you build that autism or were you born with it?

File: WP_20170321_010[1].jpg (1MB, 3072x1728px) Image search: [Google]

1MB, 3072x1728px

>>33965115
ACOG.
>>33965228
You get a 3/10 for length, but you need to be better than that to get a genuine reply from me.

>>33965228
I can't even tell what you're trying to say in most of this but saying your parts need to be from the same manufacturer to be "good" is fucking retarded and you should feel bad

>>33965228
What the fuck are you sperging out about? The advantage of building your own AR is handpicking the features and ergos you want in your AR. And yes, they will outshoot your FN15 if it has the features that work best for them while you're locked into whatever you bought from FN if it's inferior or suboptimal for you.

And buying everything from the same manufacturer is retarded. Everything should be built to spec unless you're buying cheap shit or niche shit.

>>33964228
A 15" G3M is 189$ before shipping. Don't know where you got $250 from.

>>33963887
Here you go op, try buying from a company that doesn't suck. https://algdefense.com/rails.html

>>33966470
Link plz? I'm looking in that price range/length. I don't want to end up with anything too shitty like OP here.

>>33964616
So you bought shitty parts and are genuinely so retarded you think every single piece of your rifle manufactured by different companies is going to turn out the exact same color? Is that what I'm supposed to take from this?

>>33967646
https://www.midwestindustriesinc.com/category-s/328.htm

>>33964746
You read positive reviews from people that will never be in the position to deal the difference in quality. My friend just dropped 850 on an Anderson decked out in UTG. $850 on a rifle that he KNOWS was purchased for $500. I have another friend that traded a Windham for a M&P Sport. Not a Sport II, a sport. He also refers to the AR160 as "an AR"

Those are the people that give UTG good reviews

>>33965228
Yea, so it's exactly like building a small block actually since nobody buys the wrong parts then mills them to fit the engine and we are long past the days of old school hot rodding and porting manifolds because nobody made headers yet. If you want to talk swapping a 9" into an F-body or other fabrication then your analogy would work.