I'll probably end up rebuilding this in 4 months with a MK8 DDC edition
old >>33710803
the circle will complete itself
Clones lead to gucci rifles lead to clones lead to gucci rifles
Don't. Just build a new rifle.
>>33717562
mk8 is best 8
>>33717562
Aero precision ultralight mount y/n
>>33717563
Thx m8.
>>33717565
Anon was doing photoshops and chose to do it
I have a mk8 dessert dick color coming
>>33717562
i'll probably buy that rail if you sell it
Why are people on Arfcom so retarded
>w-why won't you sell me just the brake off your upper?
>>33717603
is it pinned?
>>33717586
Looks like you have more than 10 rounds in that mag.
>>33717581
Nah, the only clone I wanted was a M4 block I. If I did any other clones it might be a basic bitch M4 with a carry handle and CAR stock and maybe something from the vietnam era like an A1 or XM177.
>>33717619
i should have epoxied a wooden block into it
>>33717613
No, it's just only listed with the upper
>hey man, nice car ad but can i buy just a tire?
>>33717631
you might end up having to part it out since no one wants to buy your garbage with other garbage mixed in
>>33717627
the cycle does not apply to everyone really
but that's what psi's doing
Fuckin finally
>>33717599
I still need to take it innawoods to see if I'll want to swap rails. If it's a pain in the ass to ruck with I'd probably want to lighten up the front end a bit
>>33717651
uggo
>>33717645
If I was that desperate for 20 bucks I'd just go give handys. I'm in the gun for like 200, no reason to make it a pile of parts instead of a complete rifle
>>33717651
why though.
>>33717664
>glocks lack of aesthetics
You arent wrong but damn it handles nice
>>33717670
Uspsa my dude
>>33717651
neat
>>33717686
The surefire makes the glock 34 fairly sexy
>>33717686
Yeah man im happy with it, i might rice it out if I jump into limited division. But for now its going to get new sights and a new connector and thats about it
>>33717619
Yeah
>>33717628
Id have drilled it out
>>33717651
Congrats
>>33717737
Caliber?
>>33717763
looks like .300 blk
I fell for the AR meme
R8 pls
Also what stock should I replace this one with
>>33717774
SL-S
>>33717774
Did you put that red dot on there for memes or are you actually retarded?
>>33717763
300 blk
>>33717774
that barrel though
thing must be pretty damn light
>>33717788
kys
>>33717791
Nice. Get a QD mount for that red dot, stubby vfg, a surefire scout with tape switch and arisaka mount, and it will be perfect. Magpul makes a mag specifically for .300 that's supposed to be more reliable with heavier subsonic ammo.
>>33717702
that nearly flush aesthetic
>>33717722
what sights
>>33717774
do you not have cheekbones
>>33717774
5/10
>>33717774
Can you even see through that RMR?
I know they make riser mounts for them, that just looks uncomfortably low.
>>33717813
I actually ordered a Larue qd mount back in March. the HK height one that has 1/3 cowitness with the troy micro buis I'm running.
>>33717651
Wrong glock m8
>>33717891
>HK height
you will regret that
>>33717895
It's always wrong when you buy a Glock
>>33717900
Nah, the regular height mount that's on there is way too high, especially when you're using that pdw stock without a real cheek weld. It's not even a substantial height difference, it just allows you to use the irons without taking it off and also keeps the profile smaller.
>>33717891
>Troy HK-style buis
>thinks they're the same thing as HK sights
>orders 1/3 cowitness mount for HK sights
You can't actually be this stupid, can you?
>>33717911
>>33717903
That was a good post.
Ok next purchase is optic
>>33717917
Those particular Troy sights are HK height.
>>33717932
>1"
Going full fudd I see.
>>33717932
>1"
>>33717917
Talking with Troy.....the Micro's will do a 1/3 co-witness with the 660HK and full with the 751.
>>33717938
He's gonna get the most expensive version of the shittiest scope Leupold sells
Do I need a adjustable gas block if I want to use a Suppressor on my AR?
>>33717938
>>33717940
Buying http://www.midwayusa.com/product/1362519819/leupold-mark-ar-mod-1-rifle-scope-3-9x-40mm-1-10-mil-adjustments-matte
>>33717956
Fite me
>>33717917
>>33717957
no but it's helpful, war upper is the best option
>>33717958
>literally bullied into buying illumination you'll never use
> >39 big laffs
>>33717627
where do i get one of those stickers.
>>33717974
ebay
>>33717972
If I'm spending that much and want a scope that's gonna last $100 is nothing
>>33717974
Give FN $1600
>>33717895
no you
>>33717820
Toss up between proctor y notch, taran tactical, or dawson precision
>>33717895
Wrong
>>33717903
Double wrong
>>33717958
> $300 scope
Facebook gun groups might be more your speed.
>>33718030
$450
>>33718022
Hello friend
>>33718023
WRONG
>>33718034
Does the illumination make it more accurate or something?
Has anyone really been far even as decided to use even go want to do look more like?
>>33718064
no, shut up
>>33718056
It's just an illuminated reticle afaik
>>33718064
>>33718064
PMAG Gen 3 MCT is now available
https://www.magpul.com/products/pmag-30-ar-m4-gen-m3-window
Selling a Carbon-15 since it will never be on the level of my Zasty AK. Won't regret a damn thing.
>>33718064
oh my god he actually went outside
>>33718098
what's new about it?
>>33718120
Medium Coyote Tan. It's the color that the Marin Corpse uses.
>>33718111
And look what happened to him. It broke his brain.
>>33718129
>marin crops use them
>cloners are now rushing to buy them buy the case
>>33718143
they also look good
>>33718143
>>33718147
>>33718147
>they also look good
Sure, the mags look alright. It's too bad the rest of this looks like shit >>33718152
>>33718162
go back to /r/guns
test
>>33718098
nice. i was waiting for this
>>33718111
>implying i dont go outside
McDonald's ain't gonna get itself.
>>33718188
gj u posted
>>33718195
my local McDonald's no longer had grand macs :,(
>>33718198
fucking /g/ mods deleting my thread and then not doing anything
>>33718202
good
>>33718179
>he thinks that tan furniture actually looks good.
Gross.
>>33718206
All you do is shitup wherever you post. I hope you get permabanned for being a cancer to this site.
>>33718206
Stop posting ur shit pc then
>>33718056
>dat frame
>>33717581
Every time I think about building a clone, I decide that I like parts without NSN numbers more.
>>33717651
Noice.
>>33718224
it was my desktop thank you very much
>>33718227
>that 20 round aesthetic
>>33718220
>current year
>not wanting a tan/FDE rifle
go back to /r/guns faggot
>>33718237
I've had a few of my more normie leaning gun friends ask if the rifle is .308.
I uh...I wish I had better friends.
>>33718232
Shit background
>>33718243
Oh sorry, are we back in 2013 again?
>>33718256
black guns are retro now
>>33718238
>have two marin crops clones
>not buying speshul muhreen mags
>>33718251
M14 as usual has no clue what she is doing
>>33718232
>he uses chrome
>>33718202
That's a fuckin shame dude, those Grandies are most excellent. It's my favorite thing there now.
>>33718269
>he uses firefurfag
>>33718266
Faru is the one who matters the most anyways
>>33718262
>black guns are retro now
black guns are eternal because only like 1 or 2 of you anons can actually put together an AR with FDE furniture that actually looks aesthetic.
The rest of you throw on shitty FDE magpul and b5 furniture and shitpost about how you think it looks good because the color is good.
>>33718282
>being an AR racist shitlord
>>33718280
proportions of that rifle are all fucked up, but hers are a-okay
>>33718266
>>33718293
Cloners get a pass because they're stupid enough to subject themselves purchasing what the military chose based on who gave them the lowest bids for the quality that you can't fault them for using FDE furniture.
>>33718315
>PMAG
>low budget trash
>>33718294
Artists can either draw bodies or guns save for a rare few it seems
>this one was so close
>>33718306
Delete that right fucking now
>>33718334
make me
>>33718306
>>33718340
DLT IT
RN!
>>33718256
Worse, 2009.
>>33718325
I'm glad you can admit it
>>33718354
Lancers are objectively worse. They may look nice but they're pretty much milk jug tier plastic.
>>33718306
>this is the price of freedom
>>33718306
>that carbon fiber work
The crippled arthritic goatfuckers in Khyber Pass could do a better job of laying that.
New to AR. What is a decent lower parts kit? I am getting Geiselle trigger.
>>33718306
>>33718376
CMMG, Anderson, it doesn't really matter
>>33718306
Handguards need some improvement, but I like what I'm seeing
>>33718390
>>33718376
can vouch for CMMG
>>33718365
No they're not. You're an idiot.
>>33718391
fucking christ anon what the fuck is wrong with you
>>33718399
I own both nigger.
>>33718315
>any iteration of the block rifles
>low budget trash
interested to see your rifle
>>33718365
>Lancer L5AWM - great for pics, just dont drop them
>>33718376
Remove this photo from your hdd
>>33718404
Who doesn't own both? Lancers are nicer.
Cmon some one bully
>>33718403
You can at least mount a scope to that. The shitposting potential is off the charts apparently too
>>33718306
who even makes the time to make this image
>>33718410
If only L7 mags looked good
This and the DMR are the only acceptable M14s
>>33718429
Pretty good mount if you want to forgo having BUIS. Try harder.
>>33718429
predictable/10
>>33718411
>>33718434
Its real and it costs almost 5 grand
>>33718429
>not at all rigid
>not at all precision
>not at all cheap
>6000 series alum
Looks neat tho.
>>33718453
Will you ever not be retarded?
>>33718485
Who makes it?
>>33718492
https://www.reddit.com/r/guns/comments/66o68v/hey_thats_a_weird_looking_aoh_my_god/
>>33718470
Why would you save my shitty phone crops instead of just googling "RPK Cosine"
Have you even gone to the source of any of these images
>>33718489
>shit taste in battle rifles detected
Lemme guess you like the M1A Socom don't you
>>33718429
>>33718453
I'm about to do this
>>33718485
>>33718457
These are too low for buis?
>>33718497
The HCAR is $5000, I want that stock for an m14.
Hey, what's the best way that you guys have found to remove spray paint from guns? I used that Rustoleum camo paint on my LE6920 and want to strip it back to black for the new upper receiver and rail I have coming in. I've heard carb cleaner works well, just wanted to see if any of you have a perfected process.
>>33718526
Are you going to get out a hex key set in combat?
I mean, will any of us ever need BUIS? Probably not. Do I like having the option? Yeah.
>>33718522
>buying a mcmillan stock for anything besides the remy 700
>buying any mcmillan stock that isn't the a4
But why
>>33717805
Your light is upside down.
>>33718556
because M1A
>>33718554
doesnt witcheranon have buis on his rifle
he uses an aero mount
>>33718567
>>33718535
It's not just a stock.
>>33718574
We just talked about it last night.
I told him he should take the BUIS off to save weight.
>>33718590
>We just talked about it last night.
must have been in the autistic screeching channel I wasnt in
>>33718595
theres no such thing as up or down with these lights, its just the location of the label
>>33718501
>>33718501
Lose the trip.
If I chop my barrel to 14 inches, will a MB556 be long enough to be pinned and welded for it to be non NFA?
>>33718399
>>33718404
>>33718410
>>33718422
>Milk
>jug
>tier
>plastic
>>33718619
are you trying to hold his pictures hostage..?
>>33718618
The letters are upside down, thus it's not installed correctly. You should remedy this mistake as soon as possible. Besides, it's better on the right side, you don't need to lean out as far from behind cover to use the light. Unless you're a lefty, then you should just lean really far out and get shot, demonspawn.
>>33718625
14.5 and you're golden
>>33718643
>The letters are upside down, thus it's not installed correctly. You should remedy this mistake as soon as possible. Besides, it's better on the right side, you don't need to lean out as far from behind cover to use the light. Unless you're a lefty, then you should just lean really far out and get shot, demonspawn.
>mfw
>>33718630
i pawned them off to chimps for a reason
>>33718633
I think so. Gave me a good kek
>>33718619
>low res versions
Git gud kid
>>33718630
>>33718653
well fuck I was pretty set on those
I like transparent mags
The best way to remove a tight gas block without marring the finish on a barrel? Had to use oil and nylon hammer to get it on the first time, scared I might fuck up the finish on barrel taking it off.
>>33718662
they arent terribly reliable, its been shown time and again
USGI are tier 1 aesthetic anyhow
>>33718663
>scared I might fuck up the finish on barrel
Maybe ARs aren't for you, anon.
>>33718663
blow torch
>>33718663
Oxy acetalyne torch is the only way.
Good luck anon, were praying for you.
>>33718679
>USGI are tier 1 aesthetic anyhow
This
>>33718650
>>33718643
HEY LOOK AT THIS
>>33718679
but I need to see how many boolets I have
>>33718719
>too poor to buy a switch and mount his light on the correct side
>>33718731
https://www.magpul.com/products/pmag-30-ar-m4-gen-m3-window
>>33718719
>clicky cap
Fuckin pleb
>>33718735
I actually like left side tho
>>33718735
HEY MORON! HEY FUCKING MORON!
THATS WHAT THE LAST PICTURE IS SHOWING!
>>33718719
I certainly hope you don't operate like that, friend. You're going to get your hands and/or arms shot up.
>>33718738
not good enough I count them from the back
>>33718755
Get a screwdriver and a hammer and cut witness holes at 15 and 30
>>33718577
Whatever it is, it's like an m14 without all the m14 problems
>>33718755
http://www.radetecusa.com/products/digital-counter/ar-15-m-16/
https://www.cheaperthandirt.com/product/command-arms-accessories-ar-15-countdown-magazine-223-556mm-30-round-polymer-black-cdmag12-814716011140.do
>>33718731
>>33718738
this. I just sold off my poverty D&H mags and bought 16 more windowed gen3
>>33718763
>an m14 without all the m14 problems
wrong, it's still an M14
>>33718747
making hits right the first time and sticking out a little > not making hits and not sticking out
>>33718768
But it's got a magwell, a pistol grip, you can mount a scope to it, and it probably doesn't even need bedding
>>33718779
life is caw'a'dootie, kiddo
>>33718785
isn't*
>>33718785
Fluffy can't get shot cause all the bullets fly over him
>>33718745
>right handed
>leads into a room exposing his non-dominant side
>somehow thinks his flashlight is still on the correct side
What the fuck are you even trying to convince me of? I know you're retarded already.
>>33718796
>>33718797
holy shit kys
San Francisco just got hit with a cyber attack.
http://www.sfgate.com/bayarea/article/Massive-power-outage-hits-San-Francisco-shuts-11089574.php
>>33718818
Id ask you to do it for me but I don't want to get shot in the kneecaps little guy.
>>33718828
Aiden up to his old ways out in CA
>>33718828
too many anal fisting machines working at once
>>33718828
>>33718917
so much for reducing us to ashes...
r8 this b8 boyos
>>33718999
shitmod/10
>>33718999
>when ur poor but you want to look gucci
>>33718999
>keybtfmod
>pws
>mbus
>literally who bcg
>>33718999
Start over
>>33718999
>Vortex
Well, when it breaks, they'll replace it, so you break that one too
>>33718429
I'll bite.
Looks like half of a ring could slip forward or backward a little.
>>33718999
-4/10
Think I'm gonna sell my Colt and buy an ACOG
>>33719028
but my bcg is speshul
>>33719089
damnit anon
>>33719089
Is it African American
>>33719089
u fugged ub
>>33719089
>>33719084
what model colt
>>33718999
8.4/10
>>33719089
it sure is
>>33719116
lé 6920
>>33719098
no its just been BLACKED
>>33719089
>>33719126
what's the round count? any mods?
>>33719207
>still has that colt fever
>>33719118
What're you using to secure your tape switch wire?
>bought RRA parts
never again
>>33719252
you got memed
>>33719252
why are you having troubles
>>33719260
It couldn't be helped. I am a poorfag and couldn't afford any better.
I remember receiving the A2 stock kit last year and my disappointment has yet to be matched since. What a piece of fucking garbage.
>>33719207
Never actually shot it. I didnt think Trump would win and figured ars would go bye-bye
tight
>>33719269
They're very cheap feeling and aren't very study. My RRA handguards seem to fit fine but the stock is all sorts of FMSUF
Is there a company that makes a quality A2 stock kit?
>>33719291
Do you have two tape switch mounts on that thing?
If i go to midlength gas system do i need to swap out buffers or is my carbine one fine?
>>33718549
Brake cleaner, lacquer thinner, paint stripper, whatever you want.
I sandblasted my gun with aluminum oxide and then cerakoted it myself. Turned out great. That's not within everyone's capabilities though. Stuff required: good quality air compressor, sandblaster, spray gun, in-line water catch, cerakote H and catalyst, aluminum oxide 100 grit, separate oven for baking, acetone to de-grease.
>>33719297
Colt, FN
>>33719301
yes
>>33718999
>>33719089
I like it, 8/10.
>>33719307
Most likely fine.
>>33719307
you're fine
>>33719310
nice
>>33719209
never enough colts
>>33719290
could def get 850 for it, maybe up to 1k depending on how unaware of the internet the buyer is
>>33719310
>buys ddc rail
>covers it up with black panels
wdhmbt
>>33719291
we've circled back around to gucci
>>33719335
He doesnt want to be hounded by gelluous anons
>>33719335
he's the local retard, burns up daddies money with dumb shit to impress other weeaboos on the internet. built a complete abortion 'clone' then parted it out to build that abomination. best to filter him and move on
>>33719341
That's what you're supposed to do.
>>33719362
meant for>>33719335
>>33719362
Can i put fde panels on my geissele dessert dick color rail?
>>33719216
The SL rubber rail mount for the tape switch had a slight bit of play in it, so I'm using a small piece of double sided Velcro to keep it in place/keep the wire out of the 11 o'clock mlok slot and touching the gas block.
>>33719362
holy fuck i got lucky with my DDC color
>>33718999
>>33719005
>>33719026
>>33719028
>>33719044
>>33719056
>>33719077
Am I cool now?
>>33719380
he just built the wrong kind of rifle around that rail, see G-Man's rifle for proper application of a bronze MK8
when is geissele gonna do foliage green rails?
>>33719384
Fucking kek
>>33719393
bronze guyzlee, coyote furniture?
tan/gold guyzlee, fde?
>>33719380
It's not that bad.
>>33719406
receiver set and maaaybe the stock are my only real complaints
>>33719396
As soon as Trump-senpai gets the party started in Korea
>>33719407
bronze geissele requires black everything else
>>33719423
>tfw trump will bring sexy back
can't wait
>>33719432
r u sure
post proofs
>>33719443
>>33719440
Geissele actually does make OD green anodized rails, but the contract stipulates that it's only done for whatever LE agency requested them
>>33719443
ignore scope mount and dust cover
>>33719422
The receivers are the ONLY parts I still like.
Massive, horrendous regression in likability and objective aesthetics imo. shiggo my diggum
>>33718457
Too low for buis?
>>33718466
Ow. Is it a bad mount though?
>>33718487
S-stop..I think
>>33718502
No u
>>33719065
I thought so too but they don't seem to have that issue
>>33719314
Which scope mount you running there m8?
>>33719462
How fat r u
>>33719455
Proofs accepted
>>33719467
>Too low for buis?
not QD
>>33719467
3 digits im ashamed to say
>>33719467
Aero ultralight SPR.
>>33719412
wrong
>>33719432
it requires excessive application of trashcan
>>33718554
>>33718526
Ya know I saw sooch whoever the fuck was able to fit the mbus polymers under his optic with that mount, I have the kac 600m rear and have no intention of needing qd as it's a table gun and if my scope breaks I'm gonna be going home, not restoring to irons
>>33719477
See above, thx though
>>33719479
Omg me 2 brb Kms
>>33719482
How you liking it? I just bought the 1" extended ultralight
>>33719462
Noice EDC burt. Woulda went with poly grips and a brass trit front bead tho.
>>33719483
wrong
>posting my outdated OC
>>33719494
I like it fine. It's held the scope in place. Not really much else to say about it. What optic are you getting?
>>33719503
I'm gonna get http://www.midwayusa.com/product/1362519819/leupold-mark-ar-mod-1-rifle-scope-3-9x-40mm-1-10-mil-adjustments-matte
with illuminated firedot. Just checked out the spr mount, it's on sale for the same price as the one I got and I think the aesthetics are a little better. Rip me
>>33719512
No you aren't
>>33719514
Screen capped for posterity
>>33719514
odds of him buying a scope are better than you posting a rifle
>>33719523
Deal. And when you dont get it, you have to post pic of your wife's naked puss
>>33719512
1/10 mil adjustments are really fine
>>33719524
Oh?
>>33719542
hey you're a pretty good dude from what i've seen
that ergo grip is interesting
what bolt do you have in there
>>33719524
>>33719523
Fucking racists. I'll post a rifle since anons don't have guns.
>>33719549
I just like to fuck around on /arg/, I'm harmless
Bolt is a phosphate cryptic
>>33719512
Get a fixed 6x and put a red dot on top.
https://swfa.com/swfa-ss-6x42-tactical-riflescope-1.html?___SID=U
>>33719550
>>33719539
>>33719535
God damnit I can't tell you fucks apart
Witcher get a tripcode already damnit
>>33719539
Yeah, I agree
>>33719550
>>33719564
And I forgot the pic.
>>33719561
>fixed 6x
NO
>>33719572
Ggwpnore
>>33719575
YES. You can't beat the quality of fixed power scopes and SWFA is amazing.
>>33719575
>Ggwpnore
You having a stroke?
>pro shipped
nice
>>33719598
Why didn't you at least get a CompM4
>>33719581
I don't want fixed
>>33719597
Good
Game
Well
Played
No
Rematch
Do u evn acronym
>>33719609
i like the look of the pro more, m4 looks too blocky
>>33719619
nigga u dum
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
new thread >>33719623
>>33719619
pro is SEXY
>>33719625
u2>>33719626
>>33719616
I don't keep up on Facebook memes
>>33717774
Need a riser for that optic and a coyote sopmod
>>33717891
You done goofed
>>33718514
Go away
>>33719384
You forgot KAC stolen valor sights
>>33718713