Packs n Rifles edition
old: >>33676149
How is 225 for geissele smr 13 ddc ?
this thread sucks
>>33681215
what are those guns to the left of your bookbag?
>>33681215
a little bit early
T2 lt660 $600
>>33681255
good, that's close to what you'd get one on sale.
>>33681255
well its 275 on their site. so good i guess
>>33681268
no u
>>33681281
my sbr and my buddies mock dissipator
>>33681294
I'll give you $40, slightly used milspec mag release, and a keymod handguard
>>33681294
>a little bit early
>old bread at 319
thats stale as fuck
>>33681306
is an sbr a russian shotgun? I know a dissipator is a shotgun for hunting quail
>>33681215
Why does everyone like this shitty plastic dildo? Literally cuck guns
>>33681294
no one is going to buy your airsoft replica aimpoint
>>33681333
sbr stands for Short Barreled Rifle
and a dissipator is a 16" barrel with a rifle length gas system.
>>33681346
say something larue bot jesus christ
>>33681356
kys
>>33681354
why are shotguns rifled?
>>33681369
for sabots
plastic shell around a bullet. Muh deer
>>33681363
i don't want to
will you terminate me larue 1000?
>>33681381
oh I see you're shooting deer quails
>>33681398
what the fuck are you talking about?
>>33681373
>Ctrl + F catalog for /arg/
>qb thread pops up first
>finally find juggalo bread
>Letsego made it wrong
figures
>>33681428
really big quails or something I don't know I'm just trying to figure out why you have russian shotguns for hunting quail
>>33681462
a dissipator isn't a russian shotgun. just google it man
>>33681483
haha "google" now you're just making up words
>>33681432
that rifle would be pretty ok if you had a kill flash and v3 EMR and non billet shit
Does anybody here have the US vs Russian aircraft K:D ratio meme???
>>33681255
Do it!
>>33681612
I need it really bad.
>>33681612
I don't but it sounds like something I'd like to see so hopefully someone comes through for us
anyone know where to get m6x rifle end caps for a pressure switch
>>33681294
Is $600 overpriced?
>>33681737
>760 msrp
>used and covered in paint
a little but giddy needs the money and it comes with a KAC mount i think
Any anons have suggestions for complete lowers?
>>33681737
yes
>>33681761
LMT, BCM (as long as you get a new stock)
>>33681761
Anderson.
This guy is retarded>>33681777
>>33681737
a little bit but i like it enough that i'm not willing to sell for less
>>33681757
Comes with a Larue "Fuck My Whole Rail Up" Super Mount.
>>33681304
>>33681343
>>33681375
Magpul M93B
>>33681761
Anything but PSA. Aero, Spike's, LMT and KAC all offer complete lowers with good quality parts. Stay away from "store brand" or Anderson/PSA/supercheapo complete lowers imo
>>33681215
>>33681823
i liek diss
Giddo just needs to accept my PRO in a Bobro mount as trade
>>33681849
add $200
>>33681634
found it
>>33681787
>Anderson.
>>33681845
We were hog hunting on the South Texas border. It was a great time.
>>33681856
>350 optic
>150 mount
>200 cash
I know you're bad at math but this is ridiculous
>>33681807
other than the stock I like it. how well does it shoot?
>>33681878
>hog hunting
god that's the dream
>>33681870
Kek
But did anyone ever doubt that USAF had better planes than Russia/USSR?
>>33681896
Nighty night Mr. Bacon.
>>33681896
>>33681878
Wish I had hogs around me. Seems fun
>>33681904
>>33681899
>planes
i want to go hog hunting too
>>33681849
DO NOT give that guy a Bobro dude. He's going to fuck it up with paint in the locking mechanism and dremel cuts on the fucking everything, he doesn't deserve Bobro.
>>33681893
I didn't accuracy test but it shoots very smoothly. Brake is kind of loud. No issue with feeding or firing as some people reported. No visible damage to receiver extension after 2 magazines. I need Nodak to hurry up with my A1 lower so I can build a dedicated lower for more shooting, I don't want to risk my Magpul M93B with a piston upper even though it looks fine so far.
>>33681914
>>33681904
>not full of holes
but y?
>>33681917
nice webm
>>33681919
I need a T2 for my FAL tho, M2 is more uggo than M4 but M4 is heavy
>>33681899
You should check out the warship and aircraft threads here some time. There are a lot of delusional vatniks and chink shills here.
>>33681930
It went down with the first hit. Why continue?
>>33681933
NO BORBO
>>33681938
because fuck pigs
>>33681880
well, my other option is
>sell T2 for $600
>new aimpoint with kdg mount $400
>sell kdg mount for $100
>buy bobro for $160
that leaves me $140 and it's all new
>>33681931
https://www.youtube.com/watch?v=9Xpb7F7bAsM
who /arisaka/ here
>>33681940
What he does with the bobro is of no concern of mine once he has it
>implying he'll even take the deal anyways
Also what's a good low mount for the T2. If I don't get his I'll sell mine and buy one for 500 with the money
>>33681944
How do you have a non-YHM can on YHM muzzle devices?
>shooting hogs
are you even trying?
https://www.youtube.com/watch?v=WTo3C1dpq3I
>>33681940
my acog has a bobro
>>33681955
BOROB
>>33681945
You'll have to get 600 for yours first. I've had multiple chances to get a T2 for 500-550 and I'm not goin higher than that
But I'm not gonna be home more than 3 days maybe for the next two weeks anyways
>>33681952
for the moment
>>33681957
because someone made a QD for the HTA can using YHM devices
>>33681971
Nice, I was hoping they made one. Probably 150 tho ain't it
>>33681972
tell you what, i don't wanna loose too much money since the T2 is such a great optic, how about this deal.
aimpoint pro+$250 no mount
>>33681988
get on TS you fucking nigger
>>33681998
here's my best offer: dremel your worthless optic and kys
>>33682022
no deal
>>33682007
get a m300 for that
fluffer i see you you manlet fuck
>>33682007
>on mobile
Can't >>33681972
>>33681998
If you still don't have a PRO after I shoot 2gun May 7th then I can do that. But my schedule got shifted up so I'm not home to do shit till basically right before 2gun
>>33682053
ok
>>33681988
BROROBROBRBRBOOBRRRRRRRR
https://swfa.com/bobro-precision-micro-t1-mount-2.html
https://swfa.com/bobro-precision-micro-t1-mount.html
https://www.amazon.com/BOBRO-Aimpoint-Micro-T1-Mount/dp/B00O5J4BDY
>>33682067
TANKS BURTO HOPEFULLY BOROBORO SOON
>packs and rifles
check and check
What are some patrician carbine butt stocks that I can choose from?
>>33682100
LMT
BCM
B5
anything but magpul
>>33682100
LMT Sopmod
Colt CAR-15
>>33682098
that looks fucking shitty
at least he gets to be in shade for a bit
>>33682094
The bases are the same by the way, imo find a used one T1 mount of any height on EE for <$90, take out the riser and Bob's your aunty.
>>33682100
s o p m o d
>>33681268
Yeah it does, but your mom sucks harder.
Bah dum tish*
>>33682111
>>33682127
Do they include micro screws with the mounts when you buy one with a spacer? Aimpoint apparently didn't do that with the PRO because I needed bolt cutters and a file to make my own micro screws
>10 dollars before shipping for two fucking screws
>>33681807
Why not PSA? I liked the idea that I could purchase a complete lower with the Geissele SSA trigger already in it. I was eyeballing it last night.
>>33682139
wow that's beautiful
did you paint that?
>>33681878
Lucky.
>>33681952
Got their VFG.
So i habe a 18" 223 wylde barrel. Anyonne know if i cam install a a2 fsb and what diameter i need to get?
>>33682161
You'll need a drill press and a punch set. A reamer too if you don't want to do it niggerish. F marked
>>33682155
>>33682155
letsego is very good at painting
ask for a commission
>>33682155
>>33682155
>paint
yes i painted
>>33682145
Yes, the screws are encapsulated inside the riser. When you remove the riser by undoing two fasteners from the bottom, you can take the four screws out and attach the optic directly to the base with 'em.
>>33682153
Many such cases of poorly drilled pin holes (or missing holes) or other out-of-spec dimensions causing headaches for owners. Low liklihood, but why risk it? fwiw Aero also has reports of this but far fewer, and spread over a much larger volume.
>>33682189
Wait so the same size screws work with and without the riser?
I'm confused but I'm also trusting you know what you're talkin about
So is /arg/ the most autistic thread on /k/?
Or is it arfcom clone threads?
>>33682189
Was actually about to make what you have in this picture right here. How much did it run you, minus the optic? Is it ambi?
>>33682229
bout 50/50 really
>>33682180
wow you're very good with pencils too
>>33682255
>>33682252
arfcom feels more "bro" though.
But then again, squid still posts there....
>>33682174
I love this picture such a cute doggo he's so apprehensive hahaha
thanks for posting friendo
>>33682229
the difference is irony
>>33682276
>1150 worth of ironic illumination
>>33682270
we're all cancer here. just bully no helping
>>33682274
original
>>33682280
extreme irony
get on the TS you turbofuck
>>33682229
gq is worse than arg
>>33682276
I actually have friends who are autistic. Some I've met from /k/ but hung out with IRL quite a bit. Others just through friends.
Is it me? Am I the retard for attracting them?
>>33682280
>>33682297
captcha ate my image macro
>>33682297
>I actually have friends who are autistic
high functioning or low?
>>33682289
What part of mobile posting and being away from how for almost two weeks did you think I was lying about
Did that anon from /akg/ actually join? He sounds more autistic than most of /arg/
>>33682170
Would you also know which diameter fsb i need for a 223 wlyde barrel?
>>33682299
I'm guessing he typed in the wrong numbers, right? He asked for a refund and refused to pay, right?
>>33682319
All FSB are the same width, same with barrels too I'm pretty sure. Only gas port size should matter
>>33682303
pick your shotgun shells up you lazy faggot
>>33682210
I can't get get enough light into the holes on camera but yes. There are floating screws INSIDE the riser behind these four open holes, which screw into the bottom of the Aimpoint. You can juuuust make out the hex heads in the photo.
If you remove these two Torx nuts, the riser will come off and the floating screws will fall out. You take those same four screws and attach the optic directly to the base with them instead.
>>33682232
Mm, I'm reusing a lower so I'm not really sure for the complete rifle but the upper cost me about $600 not including optic or suppressor. I'd guess maybe $700-800 for the lower not including tax stamp or ULTRA RARE roll mark.
>>33682319
That's entirely dependent upon what your gas journal diameter is on your particular barrel. Got some calipers? Give 'em a measure, but don't guess or assume it's close, gas blocks come in lots of sizes.
>>33682309
there's an app for that
and who?
>>33682293
why is my shit posting sideways from my pc
>>33682341
>dear diary, today burt was a pretty cool guy
Looks like I'm getting a Bobro mount when I get a T2 then, that should be a shitton more aesthetic than my PRO
>>33682362
no you're fucking not
you're going to buy a larue like a good buy and tell burt the bobro shill to fuck off
I want a 9mm AR pistol, does anyone know of the CMMG MK9 PDW lower will work with the PSA AR9 Uppers?
>>33682356
>camping
yassssss
>>33682346
>paying 5 dollars for a mobile version of a free app just so I can voice communicate with the same people I'm already shitposting with
I'll make it a point to join when I get home since you miss me
The anon you apparently invited in /akg/, he's accusing Krinkcat and A2 of being DDI shills along with Nick as part of some secret society. it's funny but not comedic funny, more like watching an autistic kid fall off a swingset funny
>>33682370
Larue doesn't make a mount at the height I need
this thing came in today.
seems 3d printed, the texture is kinda funky.
just need to find time to go shooting.
>>33682229
no it's /arg/
>>33682308
High and moderate.
>>33682400
definitely 3d printed
>>33682383
no those assholes wont trust me or something
>>33682394
1/3 or absolute they got you senpai
posted for ts
>>33682308
>that circle game hand under his waist
>>33682413
>1/3 or absolute
It's going on the FAL, so preferably stuck halfway into the rail
I actually kinda wanted to join thinking they got in to screech at A2 and Nick. That's sad
>>33682433
why not just use the stock mount then
>>33682408
yeah just went to their site.
looks like most of not all of their stuff is 3d printed.
>>33682439
Gucci factor. I didn't spend all that money to use a stock mount. I'm gonna get a TD stubby for it after I get my 6.5g upper as well
>>33682425
you lost the game
>>33682362
>>33682394
Nope, qb is right, you're going to tell me to fuck right off. I got a feeling about how close those hex fasteners were to the holes so I took it apart. I was wrong, the screws are a different length, the ones inside the riser are far too long to attach the optic directly to the base.
You will need to find out from Bobro if the Low T1 mount (without riser) comes with short screws. If not, you'll have to buy screws.
I'm sorry OJ.
I'm sorry everyone. I was wrong. Sorry.
>>33682463
>autism speaks
>>33682478
kek
>>33682477
What kinda camera you use to take those pics? That's high quality shit u make.
>>33682007
rifle could use some a e s t h e t i c s
>>33682483
Holy Shit
She looks like a Mass Effect: Andromeda character.
>>33682477
Even if they don't I'll bolt cutter them before I spend money on short screws. Unless they only have two. Then I guess I might have to indilge the screwjew
Also the Bobro is cheaper than the Larue but has better return to zero
>>33682007
you nerds are still doing that TS?
I got booted for some reason or another. I was drunk and watching football.
Prob an open mic
>>33682483
How many of you own a plate carrier?
>>33682502
yeah
>>33682502
yeah we still here
chest rig master race
>>33682506
>>33682506
>>33682500
The issue is just screw length, the base itself fits the optic without the spacer. IMO go to your local Fastenall or even Home Depot and just buy some short screws instead of Giddying things up with bolt nippers.
>>33682485
An old Canon 40D with one of these attached and a 580EX flash bounced off the ceiling.
>>33682506
I do but I had to buy two cummerbund extensions to fit inside it.
posted for ts
>>33682550
fucking indian wojak
>>33682529
Already did it with my Aimpoint, it's piss easy
Tho if Bobro is as much of a jew with their screws as Aimpoint I might not, they still haven't emailed me about new ones and they don't sell full lengths anywhere
>>33682443
The DDC Geissele rails are really a piece of art. Well done well done ... However, they look hideous on a rifle.
>>33682570
>a reamer too
Read nigger
>>33682104
>BCM
>B5
I'd rather Magpul.
>>33682593
then be a normie
i dun care, not my raifu
>>33682572
>However, they look hideous on this rifle
ftfy
>>33682621
Naw. On all of them. See? I'm nice to you and fair. They're the equivalent of wearing a goldchain.
convince me not to make an upper like this, pro tip you cannot
>>33681215
In this thread
>>33682689
just do it
>>33682689
>not a side saddle sling mount
This is why
>>33682689
Do you have a dog?
>>33682689
They're fucking great.
Loud though.
>>33682700
get in ts
>>33682708
nope, what now ATFman
>>33681215
I'm thinking of picking up a couple Smith and Wesson Sport II's since I'm seeing them on sale under $500 now. I already have an AR-15 that has a free float handguard, CL barrel, nice trigger group installed, etc., but I want to have a few extras on hand for the apocalypse, maybe that I could hand out to my friends so they could defend me.
Are these guns good to go?
>>33682824
Those will fill that role just fine
>>33682824
For what you want they are more than fine
>>33682520
>>33682527
>>33682529
Steel or ceramic?
The steel is much cheaper and the trojan man outercoating seems to catch fragments pretty well but the ceramics are more highly praised. For someone who doesn't have to wear their PC every day for their job. Which is the better choice?
>>33682824
will do you well
>>33682824
>so that they could defend me
>thinking his friends won't just kill him, take his food and guns, then bone his wife
Shiggy diggy
>>33682856
6a GOST Granite
>>33682856
Do you have money? Ceramic.
Do you not? Steel.
It's a toy for me, I bought steel. It'll probably stop bullets from Washington SWAT when they try to arrest me for buying guns in Oregon.
>>33682864
Quiet, you. This is my fantasy.
Still have the 18" mid length faxon barrel if anyone wants it. $150 shipped.
[email protected]
>>33683147
12 dollars
>>33683167
hard pass
>>33683336
12 dollars and 2 head pats
colt 6920 vs bcm m4 mod 1 for first ar? i know theyre both good but a lot of people say colt and a lot of people say bcm. also is carbine length gas system better for longer ranges?
>>33683477
Buy an Aero OEM or build something. Both of those are hilariously overpriced
>>33682341
I checked it online. It said .750 so i should be okay then?
>>33683477
Get the COLT 6960 CCU since it's midlength and has a good freefloat for around $1200. If you want to cheap out and don't shoot that much then get a m&p sport 2 or ac15. Colts are much nicer though.
>>33681919
how do you like the strike eagle?
>>33682911
brb applying to WSP to raid burto
ill frame your golden aero lower
>>33684290
Sell me that ACOG
>>33682299
lol $1,150 for a $600 light http://www.maxprotactical.com/EOTech_Insight_WMX200_Weapon_Mounted_Light_p/eo-vbl-000-a7.htm
>>33684315
You can't buy from them
>>33684318
Why cant I?
>>33684323
They don't have any
>>33684325
>>33684323
Yeah this. I already tried weeks ago
>>33684325
Gay
Getting my manufacturing license soon what full auto shit should I get?
>>33684325
Where have you been? Haven't been seeing you as much lately
>>33684348
FA M4 sounds like as good a place to start as any.
M249
M240
>>33681215
>Packs n Rifles
>>33684350
Haven't had the time with work n shit to post. If everything goes right it will be like that for a while.
>>33683603
Over bcm?
>>33682098
TMW I'm so glad I'm an MP and don't have to walk everywhere.
Where could I get a new carbine-length barrel without M4 feedramps that's not total junk? I want to do a retro build like pic related but I'd like to not have to deal with Model 1 or Brownells over-drilling the gas port, and preferably like to be able to shoot stuff besides M193 (so maybe a 1/9 twist and 16" is fine).
Thoughts on C.A.R. stocks? I might put one on my next build.
>>33684441
i told letsego to report you for drug use so you can spend time with us some more.
>>33684661
delete tht rn
>>33682319
.750 is most barrels
pencil barrels are smaller
>>33684703
when are you going to paint the rest of your abortion to match that rail
>>33684716
when you gib me the stock and buffer tube. I'll use this
>>33684518
Troy builds a really good xm177e2 replica
>>33684720
>literal tmnt cripple owns tmnt themed lower
>>33684720
>anderson
you keep that the fuck away from anything i sold you you little queer
also i just happen to have that MOE SL and A5 buffer system siting around in that paint scheme, doing nothing good
>>33684445
Pony is > big BCM billboard
>>33684741
^:
>>33684746
no promises. i got $20 with your name on it, go ahead and ship that stuff kthx
>>33684737
>buying anything from Troy
They must get their barrels from somewhere, but I'm not buying from them.
>>33684818
muh bb killers
>>33684806
ok i'll ship you just a buffer
>>33684833
how much for both fgt
is Asriel dreamer a flower or something
>>33684855
$125 shipped
buffer, spring, tube, stock
>>33684855
stop buying sloppy seconds you cuck
>>33684891
kys
>>33684903
but it's painted
>>33685022
it's custom
i'm giving you a deal here
If I don't buy anything at the gun show this weekend, I'm going to probably just trick out the USP.
>>33685031
oy vey a deal!
I need to buy lumber.
I hate all of you.
where the fuck is bb
is he kill y/n?
>>33685324
Hopefully
>>33685347
Don't be mean, anon!
>>33685360
Hopefully he is, and hopefully you join him.
>>33685378
I've never seen such a rude anon before!
>>33685401
And hopefully it's a closed casket funeral.
>>33685401
>>33685360
I hate you
>>33685107
>>33685107
>>33685271
>>33685324
>>33685347
>>33685360
>>33685378
>>33685401
>>33685431
>>33685462
>muh tripfags ruin threads
>>33685481
Yes you do.
>>33685481
>hey guise I pee blood and muh computer is broke
>>33685507
Thats not all thats broke
>>33685488
>>33685507
>>33685523
Anon posting should be punishable by death
>>33685488
>imagines /arg/ without trips
>anons make 310+ posts about pic related and PSA blem sales in every thread
You need us
>>33685532
>hey guise I wanna buy stuff but have no money what do?
>>33685535
Actually it would be great. There wouldn't be an /arg/ and all would be right in the world.
>>33685535
Your forgetting anserson errywhere
>>33685542
>can easily ignore /arg/
>doesn't have to post in /arg/
>comes to /arg/ to complain about it existing
>>33685563
>projects externally
>>33681215
Man Daniel Defense mil spec triggers are total shit. I thought it would be better than an Anderson or CMMG but it's much worse.
>>33685535
https://encyclopediadramatica.rs/Unwarranted_Self-Importance
>>33685563
>>33685563
You know that's not true. You can checkout any time you like, but you can never leave.
>>33685570
>projects
You keep using that word, I do not think it means what you think it means
>>33685590
>You keep using that word
>only used it once
>fails at memes
>will never be one of the cool trips
Thoughts on C.A.R. stocks? I might put one on my next build.
>>33685590
I just got to this thread like 5-10 minutes ago. I think you need to reconsider thinking that there is only one person shitposting you.
>>33685603
>>33685613
You seem a decent fellow. I hate to kill you.
>>33685639
>>33685649
Underage B& pls
>>33681215
Purely from a reliability perspective, is a mil spec trigger your best bet? Is it the the one that needs the least maintenance and is going to go bang more so than an aftermarket?
>>33685639
Shit movie, shit memes
>>33685649
It's from The Princess Bride
>>33685870
No, Geissele's are the best. Larue MBTs are cuck triggers, Geissele is the best.
Is anon bitching again
Is it impossible to get an SP1 or other preban for <$1.5k? Life sucks in my state.
>>33685945
>Hes posting again
>>33685949
There are a couple on gunbroker rn
>>33685915
I mean is there any info out there to back that up? I know Geissele and others feel much better to shoot but my main concern is to have a rifle that is as reliable as possible
>>33685054
Buy DPM stencils
>>33685969
They're being adopted by some special forces for use with full autos. They won't cause the gun to fire if you leave the safety off and have it rattling around in a vehicle.
https://geissele.com/about-us/
Geisseles also being adopted in some DMR rifles.
>offered an M&P9 with apex trigger for ar
Ytho
Also looks like aimpoint is sending me the screws
>>33686012
Nice blogpost
>>33685651
Dear bb,
I told you I'd let you know if I decide to sell pic-related. I've decided to sell pic-related. Barrel profile is socom fyi.
>>33686045
How much?
>>33686063
I'm gonna try to jew arfcom for 750 and see what happens, bb gets a special tripfriend reduced price if he's still interested, we'll see what happens if he doesn't want it.
It has fewer than 500 rds through it
>>33686045
>block II autism wearing off
F
>>33686085
whoru
>>33686077
I don't want it, just curious. Block iis are turbogay.
>>33686085
>block II autism wearing off
Good riddance
>>33686085
Can't wait for the next hot meme.
>>33686109
Block II is the least aesthetic thing SOCOM has ever picked up desu
>>33686139
Block ii is pretty good but I haven't had time to go shooting in like almost three months, it's a sad state of affairs. And I need a nice optic more than a second upper.
>>33686139
I think they look rad once they are worn, but they aren't going to get that way in here. I also think the elcan looks the best out of the options, but only suchka has one afaik
>>33685915
Actually my MBT has a better pull and break than my SSA. The SSA has the better reset, but that is only marginally better.
>>33685945
When isn't anon bitching?
>>33686077
Fugggg. I would have totally bought it if I hadn't just picked up a URX 3.1 to start a new upper with.
>>33686171
No sweat bruh. URX3.1 looks cooler than RIS anyway. I think arfcom will buy this upper, they bought a black ris ii I also had in about 30 seconds of the post going up
>>33686163
Agreed, I really only like the block II and the mk18 Mod 1 with clcans and t1s when it comes purely down to aesthetics.
>>33685915
i really dislike mark larue and am a geissele fanboy, but the mbt is a really good trigger. i much prefer it over the ssa (im not too hot on the ssa anyhow)
>>33686191
Agreed
Also
>>33686209
Oh shit senpai, that's lookin good.
mod 0 is best mod, Socrates himself was never able to successfully debate against it.
>>33686201
That trigger shoe on the MBT is nice
>>33686209
Nice setup.
Have you tried the magpul offset sights? They pair well with that optic.
>>33686221
Holy fuck thats ugly
>>33686209
Should have gotten the 14.5.
Should have gotten something other than a Vortex
Should have gotten something other than MBUS
Should have been able to put your rail on yourself
>>33686209
those mbus sights tho...
>but they work and theyre cheap
true, but cheapens the rifle imo
>>33686229
>anon opinion
Post your PTAC
>>33686218
Thanks familia
>>33686228
I haven't really considered canted anything, was planning on getting troy hk sights for it.
>>33686231
>14.5
Nah
The optic is fine, it's a hand-me-down
>>33686239
muh ptac
>>33686238
They're getting replaced, don't fret.
>>33681215
Anyone have experience with KDG?
>>33686268
What are you replacing them with? Do you know yet?
>>33686390
Bought an mrex.
Either a screw came messed up, or I bolloxed a thread up on it. Fill out a CS form. Three days later more screws showed up.
Happy as fuck with the mrex
>>33686444
Goddamnit. That's what I was planning on getting.
Pics? I think it's slick as hell.
>>33686423
>>33686529
That front sight looks fucked.
New thread when
>>33686544
it is fucked
only retards buy HK style AR sights
>>33686558
well now I have to get them
>>33686549
When anon or fluffy gets around to making one
>>33686558
What's wrong with HK style fronts?
>>33686558
you mean like eotechs and insight lights?
>>33686578
because you adjust the front sight for elevation, the post is not centered in the circle
so the circle in circle effect, the fucking reason they're designed that way, doesn't fucking work
it's a sub human kind of stupid
new thread
>>33686587
>>33686587
>>33686587
new thread
>>33686587
>>33686587
>>33686587
>>33686593
>>33686594
look what you did
That does make sense though, guess I'll reconsider.
real new thread
>>33686603
>>33686603
>>33686603
>>33686593
Shitty, they look aesthetic tho
Make a thread so I don't have to use deaf retard thread
>>33685546
she's fine as fuck
>>33681930
how is the glass on that ?
is that the 1-6 strike eagle?
>>33682506
have gotten a new AR and couple of other things but same plate carrier