HELP! my rollpin won't come out
So stop hitting it
>>33503922
Tried the other side?
>>33503922
other side you dumbass
>>33503948
yes.
i swear this has never happened before
bump 2
Obviously you need to escalate the roll pin war to steel punch warfare.
>>33504182
i already have! still not coming out
bump 3
i put it in my drill press and got it flush. what do now?
i tried pulling the other end with pliers but it's not working
>>33504293
is that a hipower?
If so, the later mark II/III models have notoriously difficult to remove rollpins in the trigger group. You may have to use that drill press or a vise to press it out.
Put the hammer forward?
>>33504437
yes but it's a mk I
>>33504441
how would that do anything?
>>33504293
>the dents around the pin
Nice job.
>>33504442
ah, well if you want to punch it out make sure you have a strong steady base (anvil, heavy table, lead block, whatever) to support the frame otherwise the excess moevement will waste your effort.
I mushroomed a brass punch learning that.
>>33504479
I don't need your shit right now, Pepe.
>>33504499
as much as I hate to say it I think I'm going to take it to a gunsmith tomorrow
I'm really bummed out I was planning on doing a April Fools thread that i had planned for months
>>33504479
A gun smith can remove dents by taking off a few thousands of an inch
>>33504293
Buy a better gun anon.
>>33504961
No.
>>33504293
>roll pin
>it's clearly solid
what did you mean by this?