Did I do good /k/?

>>33461879
you didn't tell us how much you spent

> I'd have rather bought American if possible.
It literally was and it was literally cheaper

http://www.atlanticfirearms.com/component/virtuemart/shipping-pistols/omega-9mm-full-size-pistol-atlantic-exclusive-detail.html?Itemid=0

Thanks for supporting Turkey and terrorism.

File: 20170104_133023.jpg (418KB, 1024x576px) Image search: [Google]

418KB, 1024x576px

>>33461879
Mine has ran flawlessly and made a wonderful SBR. There is no such thing as an American MP5 short of kit builds (which are rebuilt Germans).

I have made accurate hits at 200m on steel using just the sling.

>>33461902
$1700 wingwangs.

>buying turkshit

>>33461935
you saved a hundred under retail so not bad I guess. but don't question the quality it's built on HK tooling and under the supervision of HK engineers.

>>33461926
Are those actually any good?

>>33461926
It's cheaper, but that's probably because it only comes with 1 magazine and no accessories. I did consider Omega, but the Zenith seemed to get better build quality from my research. Which when spending that much, $100 difference wasn't good enough to buy lower quality.

>>33461879

The turkish guns are better, they are built on HK tooling, US guns are not

>>33461953
Because HK pays a couple of engineers to stand around and smell turks, right?

There have been no HK engineers at that factory since the day they trained the roaches to push buttons and pull levers.

>>33461929
wow. That's good to know. I'll definitely see what it can do on the 100 yard range I shoot at. How long did you wait to SBR it? I'd really like a classic telescoping stock.

>>33461994
oh I didn't realize you were there. thanks for correcting the record™

File: 1465802198946.jpg (15KB, 480x360px) Image search: [Google]

15KB, 480x360px

>>33461953
>under the supervision of HK engineers.
fucking what

>>33461926
>> I'd have rather bought American if possible.
>It literally was and it was literally cheaper

I would rather have the turk mke gun

>>33462034
I don't know if it was "under supervision" of HK engineers, but I read that it's design was at least double-checked by a guy who spent his smithing career building HKs

File: IMG_20170109_204416.jpg (588KB, 1024x768px) Image search: [Google]

588KB, 1024x768px

>>33462016

Waited for about 4 months of testing to make sure not a lemon. Took 9 months to get the paperwork back.

Part of me wishes I had gotten the K model to SBR, and this model to use the braces on. But damn, it shoots oh so nice. Less recoil than my vector, the trigger is lovely out of the box. Safety selector is stiff, and the take down pins are STIFF. I would toss that handguard, and get a Wide or lighted forend (like I did)

>>33462036
Well, just remember everytime you buy a cheap Turkish gun you support the murder of the Kurds, the only halfway decent Muslims to ever exist. And help fund the white genocide of Europe and the Muslim invasion.

>>33462059
Does that widened handguard fit a flashlight? is that what I'm looking at? That oughta make a good HD weapon.. if it weren't bought for $1750, lol.

File: kek~09.jpg (20KB, 327x303px) Image search: [Google]

20KB, 327x303px

>>33462099
>unironically defending the Kurds
you are a child and know nothing
Saddam did nothing wrong

>>33462109
No. You have to get the surefire 628 or other similar brands. I got mine for 90 bucks as a police trade in, replaced the incandescent bulb with a LED from MALKOFF devices.

>>33462099
>cheap

>>33462109
>using an nfa weapon for home defense
good luck ever getting it back if you end up ever using it

>>33461978
You forget about 922r hurdles if you decide to SBR

>>33462099
>Well, just remember everytime you buy a cheap Turkish gun you support the murder of the Kurds, the only halfway decent Muslims to ever exist. And help fund the white genocide of Europe and the Muslim invasion.

don't care

File: HK51k.jpg (20KB, 260x200px) Image search: [Google]

20KB, 260x200px

While we're on the topic of tiny HK guns. Does anyone sell a copy of the 51K? I was originally looking for one of those, but just couldn't find one.

>>33462257
Right, can we all agree to just never bring up 922r again? Literally no one charged in the fucking history of ever.

>>33462257
It is actually possible to make 922r compliant, with a magazine, cocking handle, foregrip, and stock. You can opt to change out the non-aesthetic bits for things like trigger, sear, hammer, etc with american parts instead.

File: 145584302053.jpg (233KB, 1349x763px) Image search: [Google]

233KB, 1349x763px

>>33462297
Vector sold V-51K pistols that where quickly gobbled up and made into SBR's

I've got one with a Flemming in it I've been waiting for since July.

>>33462458
you lucky son of a bitch. I'm very jealous.

People are buying MKEK (kek) gun because nobody in america could make a proper mp5 and HK is selling us their butchered bullshit so bad they didn't even call is as mp5

Still getting pof-5 tho. It's cheaper and than half ass finishing, the quality is actually comparable to turkish mp5

>>33462540
*other than

>>33462540
The omega ones are as good as pof or zenith. More german, too.

File: hkhappyfamily.jpg (2MB, 3952x2164px) Image search: [Google]

2MB, 3952x2164px

>>33461926
>speshul waponz
Good job retard
>>33462458
I've been considering a semi build to get real fucking nato real fucking tiny
>>33462580
>speshul wazpons
Again anon, its time to stop
>>33462540
>Still getting pof-5 tho. It's cheaper and than half ass finishing, the quality is actually comparable to turkish mp5
A wise choice but FEDARM was stopping imports a while ago. Hence the closeouts at $1200

File: Fugg.jpg (12KB, 228x252px) Image search: [Google]

12KB, 228x252px

>>33462458
>That thing

File: brrrtindoors.jpg (2MB, 3911x2163px) Image search: [Google]

2MB, 3911x2163px

>>33462599
>have to retake this photo to include latest roller meme gun

I thought PTR was going to start making Mp5 clones in the next year or so?

I really like my Omega, don't have to worry about 921r when I finally end up submitting my form 1. I wish it wasn't clipped and pinned, but everything else about the gun is top notch.

Also I'm not supporting the Turkish military arms industry, which is a small benefit.

File: 1404799151469.gif (2MB, 410x231px) Image search: [Google]

2MB, 410x231px

>>33462599
>That PTR
>MFW I can't even find one to fingerfuck in person

>>33462599
>hkhappyfamily
>otherthanpistolsnotasinglehkpictured
>ishygddt

File: 10mm.jpg (1MB, 2736x2280px) Image search: [Google]

1MB, 2736x2280px

>>33462648
>paying 4x for "muh preban" for the exact same gun
No
>>33462643
Just buy one, you wont be upset

>>33462620
Really? If so then hype I guess

>>33462672
https://modernrifleman.net/2016/05/31/ptr-working-on-mp5-clone/

Maybe they saw the Zenith guns and decided that couldn't make'em that cheap.

>>33462154
I fought with the Kurds. I hope they get Thier lands back

>>33462620
Said the increasingly hopeful anon for the 1200th time.

Tha PTR94 myth has been going around forever with nothing ever solid to back it up. Wish you were right though.

>>33462670
So there's no difference between guns whether or not they were "made on HK tooling"? So the Omega is just as good as the POF?

File: 1454346346901.jpg (104KB, 987x674px) Image search: [Google]

104KB, 987x674px

>>33462618
Is that built off a M53 kit? How is it? How hard was it? It looks like it takes AR-15 triggers.

>>33462638
922r compliance isn't that hard with the zenith, but I suppose it it's always nice to not have to worry about it.

You'd only ever really get in trouble if the ATF shot your dog for something else first though.

>>33462716
Paki's can't weld as good and the first batch of guns that were imported had really shitty finishes; however, they probably all perform about the same, POF probably only slightly less consistent than Omega and MKE.

It's really hard to fuck up roller delayed blowback.

>>33462745
I just worry about submitting a Form 1 to the ATF where i specifically need to have certain parts in my gun. I'm generally not a paranoid person, but don't fuck around with 941r compliance on NFA items.

Can a Zenith be converted to 10mm easily? That's a question asked without doing a prior google.

Is this the "I didn't buy an SP5K" regret thread?

>>33462716
>"made on HK tooling"?
POF is a HK licensed factory
> So the Omega is just as good as the POF?
Probably but Omega has a history of fucking shit up and I wouldnt trust them with an NFA item
>>33462742
>Get kit
>Weld in semi denial parts
>reweld receiver
>rivet in rails
>drop on small parts
Its a really fun rifle

File: tinymp5.jpg (590KB, 1620x2829px) Image search: [Google]

590KB, 1620x2829px

>>33462783
No
>>33462793
>No paddle
>No pushpin
No thanks

>>33462793
>$2500
>no paddle release
Those two facts make it a shitty product.

>>33462767
What all exactly goes into making a foreign SBR totally compliant? I see all these "922r" and "941r"s but what do they all mean?

Does the ATF ask for specific parts to be in certain specific guns? or does only a certain number of parts need to be American made?

>>33462823
https://www.hkparts.net/shop/pc/MP5-US-Compliant-Parts-922r-c235.htm

>>33462817
Can be corrected, if you're willing

>>33462821
You're overshooting the price. I've seen them in stock for $2100. And you get a gun actually made by HK, and don't have to constantly tell everyone "oh but it's licensed!"

>>33462823
Fuck, typo. I've been looking at Jerichos all day.

922r requires rifles to have certain number of certain parts to made in the United States.

http://blog.cheaperthandirt.com/922r-compliant/


You don't really have to worry about it with a US-manufactured firearm, but you'll have to replace certain parts on foreign made firearms so that the ATF doesn't hogtie and execute your canine.

>>33462823
>>33462881
>Forearm / Handguard
>Trigger Housing
>Trigger
>Hammer
>Magazine Housing
>Magazine Follower
>Magazine Floorplate
would be the easiest to do
>>33462892
>Can be corrected, if you're willing
Its a bitch to do and shouldnt need to be done on an imported pistol

>>33462906
Pretty expensive, yes, but if you're paying a premium for an MP5 type gun actually made by HK, you're probably not going to be deterred by paying one of the well known smiths to add the paddle, or clipping and pinning the trigger housing if you're anal about aesthetics.

Don't forget the trilug, arguably the biggest hurdle.

File: SquatchMan&AK.jpg (128KB, 396x716px) Image search: [Google]

128KB, 396x716px

>>33462670
>Just buy one, you wont be upset
IDK, would it really suit me?

>>33463046
You seem like a big guy. PTR isnt for manlets

>>33462993
You could get somebody to build you an MP5 parts kit for not much more.

SP5k is fucking stupid, can't even suppress the thing.

>>33463096
I want to, but it has to wait.

>>33463153
sell your normal sized guns and buy a PTR already

I don't understand the appeal of a semi-auto SMG/PDW.

I'd suck a syphilitic nigger dick for a FA UMP40, but for a MP5 clone, Id only jerk it off.

It's like, logically, I know I could just get a polymer pistol with an exdendo clip (trigger warning). or otherwise just move up to an AR. But no, I want this neutered pistol caliber piece of art in my life,

>>33463120
Just what I've always wanted, a kit build hammered together by some chain smoker in his spare time that I have to wait months for, and costs as much as a factory built HK gun. I'd sooner buy turkshit than go that route, what a stupid fucking suggestion.

>>33462795
Thanks. How much welding skill do you need? I haven't welded since high school auto shop. What do you rivet the rails in with. Does it take AR triggers?

>>33463234
then build it yourself you fucking faggot.

>>33463313
You're just full of great ideas.

>>33463262
>How much welding skill do you need?
about three fifty. Its 2.54mm sheet steel all around, if you can do that you can do this.
>What do you rivet the rails in with.
A press
> Does it take AR triggers?
As part of the semi conversion you need to deny the original FCG. The one in mine is a BRP one which takes AR15 hammer, sear and trigger (not safety).

>>33463346
Thanks for the info, I'll have to think about it.

>>33461970
Yes.

>>33463234
>He thinks that welding a reciever flat is difficult.
Despite what HK's pricing may lead you to believe, it's actually really easy.

Fucking Turks and Pakis can do it.

>>33462059
Hmm mine trigger was pretty shit out of the box but i am a bit of a trigger snob. Also the Zenith trigger packs are BITCH and a half to put back together but a PTR trigger shoe helped mine lose some of the pre travel and slop in the takeup. Some work on the sear and mine is around 5 pounds now.

>>33462793
Fuck reloading these without a paddle and fuck the price HK wants IF you can find one in stock.

>>33463216
in these mp5 clones, you can modify one to be able to drop in an auto-sear and have yourself a giggle machine

>>33463499
With HK toolings, CNC machines as well as dudes who have been making guns for the last 10,15 years. These guys (POF, MKE) are state owned companies after all, undercutting HK with cheaper labor cost as well as not having any of HK's morality bullshit.

I'd be starting my own company if I had the same resource as them.

>>33462599
>A wise choice but FEDARM was stopping imports a while ago. Hence the closeouts at $1200

Wait, what?

>>33463773
March/April of last year a lot of the POF stuff sold by FEDARM was on closeout at many sites. Friend of mine who is a FEDARM dealer said that they were stopping imports of them