AK General /akg/
Green Furniture Edition
>Thread #249
Old thread here >>33335854
http://pastebin.com/YdEkhdva
what kind of rear trunnion do Draco's come with these days?
how much does getting the right trunnion for a wire sidefolder run, including installation?
>>33348605
Draco-c comes with underfolder trunion.
Draco has a virgin trunion.
>>33348639
Wireside folders just pop in on regular trunnions bb.
>>33348679
Fuck
>>33348639
>>33348779
right, but Dracos don't come with fixed stock trunnions
what do they come with and hw much will it cost to get it swapped?
>>33348814
Pistol trunnion. Essentially an unskilled underfolder trunnion. Easiest to switch to an underfolder trunnion, as the rivets are in the same location. For fixed stock trunnion, you will need to redrill the receiver and plug the old holes.
>tfw non of my furniture is green
Not sure how to feel about this. Green a shit, but I can't contribute to the thread.
>>33348601
I'll have an AK with green furniture someday.
>>33348601
What's wrong with black?
That looks fucking awful.
>2 months later, Obzor finally passes customs
Shitposting will return to normal soon.
>>33349019
damn, that sounds expensive
>>33349019
Undrilled*
>>33349320
~$200 if I recall. Seemed a fair price, I purchased the underfolder assembly from AKfiles for $45 shipped. Went with Hungarian, for the straight angle (better recoil impulse) and for the double-locking mechanism. A standard Romanian will only lock on one side, and sit lower when extended.
>>33349562
fuck an underfolder
I'm after a wire folder
>>33349609
You seem the type that'll end up getting a Sig brace so I wouldn't worry about it too much.
Posted this in the last AKG
Did I fuck up?
I bought a 800m sight from Robertrtg for my WASR and it seems to be too short. How bad is having a short rear sight?
I'm thinking about exchanging it for the "Ak74" 1000m sight
Optic time for me.
What do you guys think, honestly?
Micro RDS, or 3x scope? I'm looking at the combo packages on AKOU.
RDS: shop.akoperatorsunionlocal4774.com/Goat-Fucker-Hunting-Combo-Pack-Goat-Fucker-Hunting-Combo-Pack.htm
3x scope: shop.akoperatorsunionlocal4774.com/Goat-Fucker-Hunting-Combo-Pack-Annihilator-Goat-Fucker-Annihilator.htm
>inb4 cheap PA stuff
I know and I am OK with it. Their 1-4x ACSS scope is working well on my AR already. It doesn't give a fuck about drops or bangs.
>>33349701
Are you in the 100m slot?
>>33349751
No, that's the battle setting
>>33348601
Green is best.
>>33349785
then yeah it's too short. in the battle setting it should be up on that plateau that's just behind/below where the slider is now.
bummer, but yeah you need a different one.
>>33349785
Well your 200m setting is now your 100m setting
>>33349810
or go get another iron
>>33349829
>>33349701
Wait no, i said that backwards
Your battle is your 100m your 100m is 200m
>>33348601
S A I G O N
A
I
G
O
N
>>33349868
no no, that's gooknailsalonwifefag teaching his wife how to shoot.
>tfw tv crapped out for the second time in three years since I bought it
>tfw can't spend money on gun stuff cuz I need a new tv
Fuck you Samsung
>>33349810
>>33349829
>>33349842
Thanks guys. Guess it'll be another week till I can go shoot it again
>>33350458
Why are aesthetics the absolute most important?
>>33348601
M92 is gone tomorrow morning. $700 with two mags. I think I'm actually breaking even on it which is Bretty gud since it's used now.
Don't know what I'll do with the dollarydoos. Might pick up an M72B1 kit so I can have a big wasr and a big genocide wasr
How does $900 for a SLR107 FR sound?
I've been wanting one for a while now, and this seems like a great deal.
>>33350908
Go for it, they've been hard to come by lately and even when they were available $900 is a good price
Good deal as long as it isn't beat to absolute shit
Rainiest fall/winter I can remember...
R8
>>33351187
Neat out of 10
>>33351187
different/10
>>33351187
looks cheap and rustic, i like it
>>33351187
t e c h
f a m
>>33351187
Never considered putting one of those stocks on it. Looks good to me. I wish mine had the rear sight.
>>33351187
I thought it was a psl till I opened the picture. I know that stock like the back of my hand.
Pretty cool.
Outside of Centry's fuck ups, how are tantals, outside of having not having the ability to mount a scope from the side?
>>33351470
Ayyy! They are expensive as fuck but worth it
>>33351187
Neat
>>33351621
polish home build?
>>33350787
It was nice running into you at the meet. This is the ak i was telling you about.
>>33351187
>>33351745
>literally the easiest AK to identify on the entire planet
Could you print a receiver for stamped ak parts kit?
It would have to be bulkier.
Would it just fly apart on the first shot?
>>33349701
>Buy a 800m sight for a 1000m sight rifle
>Hurrr guise did I fuck up and 2 shirt?
>>33348601
Ok, just ordered the PK-06. Was going to wait til my next paycheck but I found one for $140 on Kalinka.
>>33352492
Fightme
You're both losers
Aimpoint mounted wrong ist the best.
>>33352541
I'll be cold in my grave before I take any guff from a man with a padded buttstock.
COLD, SON.
>>33352681
>confirmed for never having used a pso type optic
>>33352730
Guilty as charged. I was just joshin'.
>>33352745
Want Obzor. Dont want to pay for Obzor. Help.
How do I into phone photography? Recommended apps?
>>33353227
download a better camera
>>33353227
camera app
>>33348605
>http://pastebin.com/YdEkhdva
who's the mongoloid that made this? since when are RD and krebs not good?
>>33353415
>>33353491
I'm on an android phone, what app would you suggest?
>>33353570
It's not that they're not good. It's just that rifles in that price range are ludicrously expensive for what you get.
>>33353659
Polish the lens with valve compound
>>33352492
Awesome!
>>33349256
It's played out.
>>33349256
niggers
>>33349256
I had black furniture on mine and it stole my bike.
>>33343666
Interesting pic
>>33354778
Is that 5.56 or a 45rnd ((10)) waffle.
>>33354809
.223, but the frame isn't big enough to say the capacity. Full auto.
>>33354862
Ya i saw that. Bulgarian gun in Iraq?
>>33354862
Theres aome Asain countries that use the ak101/102. I forget the name of them though.
>>33354927
>>33354935
Guy is in an US OPFOR unit.
>>33354927
Later down the thread he says he was opfor in Romania and Albania and shit
>>33354935
That's a milled Bulgarian
>>33354862
Good eye.
Didn't even see the third pin initially.
>Milled 5.56 select fire AK
Who issues something like that?
I thought Bulgaria was still using 5.45x39?
>>33354862
Well if its anything to go by, the cicle 10 logo is on the top like the 5.45 45rounders. Dont the 30rounders have them on the bottom?
>>33354949
>>33354946
Ah, interesting choice in caliber for that area. I would have gone with 7.62x39 or 5.45.
>>33354957
Heres one for comparison
>>33354957
They're 30 rounders
>>33354957
>>33354956
Not sure, I've seen them in the hands of African militia before though, curious stuff. I think Bulgaria's actual military uses mostly 7.62x39 and 5.56.
>>33354957
No, .223 circle 10's have them at the top like that. I'm not sure a 45 round ((10)) .223 exists.
>>33354985
Winnar
>>33354957
30 round 5.56 ((10)) mags have the ((10)) mold at the top rear (towards the rear lug) of the mag.
>>33355000
Them digits tho
>>33349880
Lol
Overflipper ak guys
>>33355600
I thought overflippers were rare Nork WASRs?
When can we expect Russian barrel imports, if ever?
>>33355680
fuckkkkkk, why is this so fucking funny goddammit
Whats the going price of the I.O imported Beryls now?
>>33356475
post more green aks
>>33356488
What the fuck is this shit?
A 4 minute pause in order to reply twice to the same post?
Is this something to try and stem shitposting or samefagging?
>>33356488
>>33356488
>>33356488
>>33356621
I never payed much attention to this before, but found this kind of odd.
>Is this the only 7.62x39 AK marked as an AK-74?
>>33356657
>Would probably help if I attached the pic
Awfully quiet this Sunday morning.
>>33356657
>>33356671
>>33350872
>Might pick up an M72B1 kit so I can have a big wasr and a big genocide wasr
Solid choice.
>>33355871
Bumpo
>>33356671
>non matching top cover
LOL
>>33356889
With it being green bakelite, at the price he gave for it, I don't think it matters that much.
He could get whatever he wanted for it stateside.
>$10k+
And that'd just be for the furniture.
>>33356621
jesus christ, that rifle is a thing of beauty
>>33356948
Don't get too enamored.
It'll just leave you wanting for something you'll never attain.
>>33348601
>sgt. Ping Ong training school girls how to shoot, his most dangerous assignment since the end of the Vietnam war.
>"I am two weeks from retiring, I did not deserve this.
>>33356998
>tfw no green polymer stock production shop
>tfw no Tula factory in my backyard
>>33356671
sorry, Izschevsk
>>33351621
What's the best place to find furniture?
>>33357418
What kind of furniture?
>>33357418
IKEA
Say what you will, but it's decent quality for the price.
>>33357458
>>33357469
Finally get to post these
>>33357480
kms urself
>>33357439
AKs. I got my first one recently but I'm not a fan of the all-black furniture currently.
>>33357462
It's definitely a steal, that's for sure.
>>33357480
So that's a AR gas tube running to that block? Does this even work!?!?
>>33357500
Yes.
Yes.
It has shortened gas system. Don't mind the glass. I had nothing else in such short notice
>>33357458
so you made a three pin. are you an FFL SOT or just a feller that's always wanted one and said fuck it.
>>33357494
Gee, I'd have no idea you would want AK furniture while posting in an AK thread. Do you want wood (new or surplus) or different polymer? Do you want it from a particular country? What kind of AK?
>>33357518
Just wanted one out of "fuck your policy njyet raifu is fine"
>>33357547
if you're in the US then I hope you are not posting from home, or from your cell phone. this board is super duper monitored by lots of people in lots of agencies.
>>33357572
based on the fact its not a reweld of a milled 3 pin receiver, id probably be safe betting he is in another country.
>>33357600
It's really easy to drill a 3rd hold into any ak receiver and add a FA trigger group you can buy for $20 online.
>>33357620
I was saying that because it is a milled receiver that obviously isnt a C39V2, that it was probably an original milled Combloc receiver
>>33357636
since he hasn't chimed in about where he is, I guess we'll never know.
>>33357458
>>33357469
>that rollpin
IO tier shit there m8
>>33357799
>tfw no qt 3.14 gf to shoot guns with
>>33357480
mmm Tig welding, enabling Bubbas to weld shit to shit you never thought possible.
>>33357620
>not having select-fire FCGs laying around
>2017
Any truth to another batch of VEPR 1Vs this summer?
>>33358070
You would've actually been faster and better off doing a Russian-style reload than that garbage, which is sad.
>>33358031
>>33358070
>>33358125
Goddamn Tim, get better.
>>33358135
working on it, practice makes perfect.
>>33358123
>>33358070
Magpul guy's latest technique is to hold new mag and use just your thumb to flick the old mag out, then slap the new mag in.
Seems pretty effective, less tedious than using new mag as a tool.
>>33358157
5.45 mags are much easier to change in my opinion.
>>33358123
Please enlighten us, all mighty and large Nick, with your AK reload knowledge. I'm sure a Professional like yourself has the latest and greatest techniques mastered.
>>33358157
I also like that it doesn't ding up the bottom of your handguards like the mag sweep technique does.
>>33358123
Why dont you shill for DDI anymore
>>33358255
Even entertaining that should've been swallowed opinions
>>33358284
His DDI 74 kaboomed at the meet. :(
>>33358304
How did you modify those handguards to fit the stamped receiver?
>>33358315
I want a Beryl.
>>33350787
>>33358315
Who here has a glass filled 20 round Izzy bakelite?
>>33358342
It's not 20 round and it's Chimps'.
>>33358255
See >>33358157 for high speed tactical reload. Using your mag as a lever against the mag release is a real easy way to not release your magazine. You could also just reload the Soviet way, which is simple, fast, and effective.
Or just learn to Iraqi reload for cool points.
>>33358284
I'm going to go with the Shia LaBeouf excuse of I AM NOT FAMOUS ANYMORE. Or maybe I just don't really have as much of a reason to visit /akg/ anymore, or at least I didn't until I started looking into getting neat AK shit again.
>>33358322
It was pretty fun to shoot.
>>33358315
>tfw an AK actually broke at the meet and it wasn't one of mine
Feels good :^)
>>33358356
Ah, looks shorter than the other, must be the angle.
>>33358320
I got a dowel from home depot, cut and filed to fit. Gorilla glued it to the lip of the hg as a shim and left in a vice for 2 hours. Wobble gone
>>33358342
I have a 20 round bakelite. Some guy on Akfiles was selling them a while back. They were smashed up 30 rounders that he cut down and fixed up if I remember right.
>>33358379
got any pics?
>>33358379
Thanks, got a set coming in the mail, finding different ways on how to do it.
>>33358360
My way is fast and simple, i dont really see the issue.
>>33358398
Not home but I'll post them for you later
>>33358421
You're welcome. I dumped like 4 mags and the glue held up and the hgs remained tight.
>>33358360
>Using your mag as a lever against the mag release is a real easy way to not release your magazine.
Post proofs or you're a fuckwit.
>>33358360
Wasn't that while Ivy was bump firing it?
>>33358320
Why not just get a set for stamped recievers?
>>33358592
yeah but it wasn't her fault evidently, the AK was just shit
>>33358592
Where did you get the Beryl from, mane? IO import?
>>33358801
Yeah, that's what I had heard.
>>33358806
Yeah unfortunately they were the only ones to import it. I got it off of gunsamerica from some store that happened to have 2 of them.
>>33358816
Was there anything really wrong with it?
>>33358820
With the beryl? Not at all. It's just unfortunate that someone gave IO money for it. I only paid $750 to the store though.
Damn I missed the reload wars
>>33358834
Been wanting one for a while. What price range are they now?
>>33358650
Those were never made for stamped receivers.
>>33358851
Double that. Hopefully FB Radom gets their shit together and either gets their factory set up or the ATF pulls its head out of its ass and lets them import more.
>>33358855
I have a set.
>>33358870
post pics please
>>33358592
>Wasn't that while Ivy was bump firing it?
>>33358801
>yeah but it wasn't her fault evidently, the AK was just shit
Any idea who made the AK that kaboomed, and how/why it kaboomed?
>>33358870
>>33358876
inb4 it's the """"""""bakelite"""""""" that atlantic made
>>33358887
If I remember right it was something with the FCG. I'm asking her now though and I could be wrong.
>>33358905
Also who made it. if you don't mind.
>>33358894
I'm hoping for his case it's a high dollar set of Chinese bakelite. They still don't have the marbling that the Bulgarian hg's have.
>>33358936
so the chinese bakes are for stamped, and the bulgy's are for milled?
>>33358922
Something was up with the trigger that caused the disconnector spring to fall out. Flandre said something about the builder mixing the wrong FCG parts so I assume it was some sort of kit build.
>>33358970
I guess this didn't cause a KB, it just stopped working?
>>33358946
Yeah.
Polish Tantals had bakelite handguards as well but they have palm swells and I'm not sure if they are compatible with standard stamped AK's.
>>33358993
interesting. thanks.
>>33358986
Yeah.
How difficult (and expensive) is it to modify a sporter saiga verses getting a SLR-104 and moving pieces around to suit tastes?
>>33359013
About the same price or possibly more depending on the parts you use and if you can covert it yourself or you have to pay someone else.
>>33358894
It's the fakelite off his high standard
>>33358578
Not him but:
https://youtu.be/bseMv6V1Po4?t=114
>>33359023
Gotcha, thanks for the heads up.
>>33357530
Oh, I'm a little stupid lel. Wood (new or suprlus is fine) and even a different polymer would be fine so long as it's not black. Country doesn't matter although Romanian seems pretty cool. 47.
I just bought an all matching M72B1 kit. Might order the barrel tonight too. Going to build it off a Childers receiver dolled up to look like the original receiver.
Should I buy an underfolder stock and make it an M72AB1? I have a big wasr currently. The yugo RPKs are very aesthetic and the underfolder is so hot, but it is also really, really dumb
>>33359235
Full stock is pretty aesthetic too.
I need a top loading drum for this and my big wasr
>>33359235
to me, an underfolder RPK sounds wildly impractical
do it
>>33359235
Underflip
>>33359235 #
The proper 4/8 rivet stock is gonna be $150-$200 unless you get lucky. You could use a 3/6 rivet stock but it will look retarded and people will make fun of you.
>>33359363
i was thinking of buying an M70AB2 kit and swapping the trunnions. Sell the kit as a full stock rifle or build it as well.
Still, an underfolder RPK is really dumb. Looks dank as all hell but it's so dumb.
Went to the gun show yesterday. Found some orange ak74 magazines including one with a 45 round capacity for my new Arsenal.
Decided to put my C39 in the picture as well. It's not too bad for a Century Arms AK.
>>33359419
>orange ak74 magazines including one with a 45 round capacity for my new Arsenal.
>at a gunshow
How much did you pay per mag
>>33359419
>gun show
>orange ak74 magazines including one with a 45 round capacity
>orange ak74 magazines
Jeez, oh God, oh shit, oh my. What did they cost?
>>33359439
The 45 round I got for $75. was $85 or $90 but the guy running the stand lowered the price as of that morning. Almost didn't buy it but I thought I'd treat myself with one.
Same guy said there was another stand that had a few 30 rounders as well for 30 bucks each. Unfortunately he was wrong as they where being sold for $50 each instead... apparently they are harder to find.
I spent enough money that day.
>>33359520
pls tell me this is a meme
>>33359523
not him, but the VAST majority of us don't have friends in russia that can get us 45 round mags for $15.
I've asked every person I've ever bought anything from in russia if they can get mags and they all say they can't, and they won't even try because they don't want to go to prison.
>>33357830
are tula bakes more desired than Izhevsk?
>>33357976
you do any reload drills? 1 shot then reload, 1 shot again
>>33359550
Nigga they're still 40-50 dollars on AK Files
30 dollar 30s is about going rate though
>>33359659
Not on camera. I will next time with my slr.
>>33356522
>45 Degree gas block
How?
>>33359652
Eh there both about the same price. I use mine as range mags.
>>33359810
Since it has the bayonet lug doesn't that just mean it was converted, and he either had someone change it out for a 45 degree, or he did it himself? Or am I missing something else?
>>33359523
Sell me magazines.
>>33359978
You're not wrong. It didn't come like that from the factory. Why someone would try to clone an AKM using a Saiga, though, is anyone's guess.
>>33358398
It's not the prettiest shim, but for under a buck and it holds... I was looking into the metal band on the ass end of some of the Chinese lower hgs. Not 100% sure if that would work or not.
Can I put a Beryl lower handguard on my non-Beryl rifle?
How much are SLR 104FRs going for at the moment?
New to AK rifles, wondering if someone can ID this flashlight mount and maybe the light itself.
Screenshot from this video:
https://www.youtube.com/watch?v=rSBNcQ9g5oc
This rifle is really visible between 1:18 to 1:28 or so.
>>33360752
I got mine for roughly $1100, give or take.
>>33360770
LGS has one for almost 1300 after tax.
I really want an AK74...
I only have a MAK 90 at the moment.
>>33360762
Surefire M951 on some sort of barrel clamp mount? Doesn't look like the Zenit barrel clamp
I want to mold an actual Automotive Carbon Fibre furniture kit for my AK74MS, would any be interested in buying hand guards, pistol grips?
>>33360770
That's a fucking awful price.
>>33360850
>AK74MS
AK-74Ms all have the folding stock.
>>33360752
Got mine with a russian metal triangle stock, alg trigger and a bunch of other goodies for 1075.
picked this up for $80 today.
>>33359520
AIM surplus is selling 45rders for like $65 last I checked. May be out of stock though now
>>33349562
But do the other underfolder trunnions line up on the same rivets? I'd like that.
>>33361228
Good deal .
Shot muh Maadi today, was low on 7.62 so I only got to shoot it a bit just to check operation and see if it was sighted in
>>33361228
Nice that's a good price
>>33361228
Neat
>>33361880
Did it need to be sighted in ?
>>33361908
Nah it was pretty much on like yours.
>>33361926
Noice.
>>33361888
Nice chink. Im jelous.
>>33360928
I know that, I have one, I could also do fixed stocks and underfolders
>>33359235
>>33359262
Does anyone know where Childers puts the Zastava logo on their receivers if you add it?
My kit has the (Z) ZASTAVA-KRAGUJEVAC YUGOSLAVIA on the rear sight base; would it be redundant to get the logo on the receiver as well? I'll be putting M72B1 and the year underneath it on the front left side of the receiver
Slow day.
>>33362963
Most people are probably out for Sunday night. Couple people in /arg/ too
>>33362986
Does that one faggot still spam goat pics?
>>33362998
Depends on your definition of spamming. He still posts goats tho
>>33362986
>out
What a bunch of fags, its all about basement dwelling.
>>33363014
That autismal place is why i rarely post pics of my ar15 for fear of association.
>>33362986
that's what fri/sat are for
sundays are for getting C O M F Y
Anybody got a lead on a top loading AK drum? Missed out on a good deal on the files recently. Would rather not pay the $125 for drum and $10 for cover and then shipping on Apex/numrich
>>33363053
>a2 upper
>a1 handguards
Kinda deserve it desu
>>33363067
Sat/Sun is for fishin m8
>>33358650
>>33358851
>>33358870
>>33358876
>>33358936
>>33360430
I used wood shims and took the wobble completely out, just haven't shot it with the shims yet but I have hope.
>>33363101
I need to go fishing, its been too long .
>pic not related.
>>33363101
A1 hand guards are comfy.Didn't even noticed the 5.45
Has anybody seen a pic of the new thumbhole VEPR-12s with wooden handguards? I can't tell if it would be atrocious or beautiful
>>33363053
How does 7n6 shoot out of that ?
Is there a milled receiver AK-74?
>>33363214
Too used to seeing 5.45, it wasn't till yesterday when I had em side by side that I remembered how small 5.56 is
Used to own a 5.45 AR tho, wasn't a fan desu
>>33363262
Waffen Werks did one thats all I know.
i guess trump wont lift obummer bans
>>33363268
Mine ran perfect.Heavy trigger spring and enhanced firing pin solved all my issues.Plus the rifle lenght gas system worked wonders with the mild recoil of 5.45
>>33363418
Yea it's mechanically nice, I just didn't like it. If I'm gonna have an AR I'd rather it just be 5.56
That said I'm selling most of this entire AR anyways cause they're boring as fuck. Might build another cheapie off this lower tho
Shot my Norinco for the first time in years today
It was as nice as I remember it being. It's been a long time since I've shot a 7.62x39 AK with a proper fixed stock
>>33363440
I like classic looking ar15s like the a1s and a2s.Anything with a flat top and more rails you can sneeze at just looks generic
>>33363514
Same, I almost bought a 603 upper to build a 733 clone out of, probably one of the only AR configurations that I really really like
>>33361260
Only Romy rear trunnions line up.
>>33361228
>push button
>not lever
Wow, nice going, fag.
>>33363514
Indeed. I have an A2 clone, working on getting the bits together for an A1. Wondering if that would be too redundant. Thats coming from the guy with a big wasr who has a genocide RPK parts kit coming.
>>33363514
A1 a best. I just shot it for the first time out to 300 yards today. Put about 400 rds through my 107fr and 104fr too
>>33363645
That's what I thought. Anyone got a bead on a Romy underfolder trunnion?
>>33363765
Place a WTB ad on files.
>>33363831
Interesting terrain and flora here, roughly what elevation are you at?
>>33363881
I wanna say about 1500ft. Above see level. Its desert in the rainy season where its actually a green color.
>>33363925
*sea
>>33362267
>I have one
Bitch you ain't even got a Saiga MK03.
was browsing Grey Shop and noticed SSO makes an AK cheek riser
https://grey-shop.ru/Accessories-Other/Military-Stuff/absober-on-buttstock
neat
>>33364487
forgot pic
>>33363951
>Plum
Feelsgoodman
>>33364909
You are like a little baby
>>33363460
>first time in years
Were you out of the country or something?
>>33363137
They look nice on the uf. If your glue doesn't hold, try gorilla glue and a vice. Worked great for me
>>33365541
Nice WASR
>>33365599
They are all wasr's at heart.
>>33365625
Nice foldy WASR
Wasr party
>>33365641
>>33365654
Is that an AKM handguard on that SLR-104fr?
>>33365570
You need a fat blonde grip instead of that Polish one.
>>33365685
Sure is, polish set to be exact.
>>33365695
But..... i like it.
>>33365599
Nice digets
I only really confirmed yesterday that the range I go to is actually 200 yards and not 100
Feels weird desu
also vote http://www.strawpoll.me/12568829
>>33365788
Cup cereal is patrician tier
>>33365788
Thats a random ass topic.
>South African gun laws aren't /k/ related apparently
How long until nothing is /k/ related except for those fucking anime pictures of people-guns?
>>33365805
Thank god someone understands
>>33365811
Eating ice cream from a cup and was bored
I fuckin love Publix so much, they have a rocky road type flavor but with coconut ice cream and shavings
>>33365853
Right now
>>33364499
Tactical cock sock
>>33365853
Just make another thread, whining isn't going to get redditmods fired.
>>33365876
God I miss publix
I could really go for some boars head chipotle chicken right now
>>33365876
Fuck that sounds good.
I just have yummy tapioca pudding.
>>33365896
Publix and costco are basically the only two supermarkets I will ever willingly shop at
You move out of state or somethin?
>>33365899
It's fuckin amazing, I love coconut too
>>33365896
>Just make another thread
Wasn't even my thread, I was just enjoying it.
>>33365923
>lived in FL briefly
>moved to Texas
>lost Publix, acquired HEB
I miss the subs but HEB has good everything so it balances out.
>>33365923
Moved across the country to live near terminal family members and elderly family members are getting to the point where they need assistance.
>>33365955
>>33365959
F
One day you will see a Publix again
>>33365955
I have friend that works at publix. I make her make my wings and subs. Subs are even better when you know your ex is required to make them and can't say no.
>>33366011
>trusting people that hate you to make your food or anything like that
No thanks
>>33365982
I've visited Florida a few times since I've left some 22 years ago (I was like 4 at the time and STILL remember those subs). I usually stop at Publix at least once and then a little hole-in-the-wall Chinese takeout place in Melbourne that my family used to frequent. Haven't been there in a while though, so I'm not sure if it's still there.
I will however argue that HEB is the better chain overall. They singlehandledly kicked Albertson's out of San Antonio and Austin, threw Kroger out of both as well, and put Randall's against the ropes too, and for good reason. I would literally fight a man for jars of "That's Salsa 'Bout Texas" salsa.
New thread
>>33366068
>>33366068
>>33366068
>>33366037
Well if I order over phone, than she doesn't know it's me. And if I'm at the counter I can watch what she does. She's also my bestie. She's supposed to hate me.
>Do you seriously own plastic cups?
Who the fuck is voting this? Do you not keep red solo cups for emergency beer pong even though you haven't played in years. And also ping pong balls for kinky sex time?