>Be drunken monkey
>Work at century arms
>Put things together poorly.
>Laugh when they break after the warranty expires.
Buyer beware with the C39v2. Trigger stopped resetting. Looked inside and found out the spring inside broke and that nut came loose
>>32327009
New trigger , done.
>>32327009
whats the nut for?
>>32327009
Everybody knows centry isn't the Mercedes of ak's. At least your problem is a cheap fix, a Tapco G2 goes for like $25.
>>32327033
No idea. It was floating inside the reciever.
>>32327009
>be capitalist pig
>is complain of broken spring in superior kalash rifle
>not making spring himself
>>32327097
This
Cyka
>tfw i can buy a cheap AR and it's totally fine
>tfw if I buy a cheap AK it breaks like a toy
AK fags btfo
>>32327097
>superior kalash.
Clearly not superior if it breaks before the AR I made myself and fired a few thousand more rounds through.
>>32327270
Not the guy you were talking to but I'm sure if centry made an AR then they would manage to mess that up too.
>>32327059
wtf. id probably be more worried about the nut
>>32327325
It's harder to mess up an ar because of current manufacturing methods vs methods for ak building. However yea, I would bet money century would still fuck up bad...
Most of the industry that doesn't machine there own billet receivers get blank forgings from Anderson. I could totally see century going Chinese with no qc. They would probably go 500 parts without checking tool cutter changes/part heat expansion/hole locations.
What else would they fuck up on...I bet they would source some Chinese barrels that are shitty. Hell I bet they would get Chinese parts for all mim parts.
I think century and io Inc should never make another gun but stay importers.
>>32327009
Is that the hammer spring? I've never seen one look like that before. If it's just the axis pin retainer, wire ones are shit. Get a plate.
Who builds a better AK.... century or the entire country of India?
>>32327009
>Buys budget AKs
>Complains when shit sucks
>>32327540
>buys budget ARs
>is happy when shit works
>>32327505
I'm going to go with option C. Kyber Pass.
>>32327009
Thats what you get for buying a c39 like a retard. Shoulda just bought a WASR like someone with more than a single brain cell.
>>32327634
>Buy a WASR.
Bahahahahahahaha. Those things are worse than the C39v2.
>>32327884
"No"
2004 wants it's memes back.
>>32327059
>>32327381
uhhh, i think that is the nut that holds the grip in place no?
side note, what a pile of fucking garbage. c39v2's may as well have been made by DDI, fucking trash.
>>32327884
As an owner of one, thing runs like a top.
>>32327270
AK beat AR in every endurance test.
>>32327033
That looks like the generic nut that is put between the trigger and hammer. It's used as a placeholder for where the rate reducer would be
>>32330004
My first AK was a WASR, that was the first AK I broke, thankfully, that one didn't kill me. Blew the dustcover off and sheared the little slide of the push tab that holds the recoil spring and dust cover in place. (yes I know there's probably a technical term for it, but I don't know it)
>>32327009
>>32327033
WTF Is an nut for.... Unless it is a muzzle nut it doesnt belong on any ak i've ever built(on country 7)
>>32327009
Where is shepherds hook broken?
>>32332031
Like I said, no idea. It was in the receiver. None of my family are nofunz so I doubt they sabotaged it while I was off at uni.
>>32330067
Rate reducer goes on the trigger axis pin, I have one in mine for shits and giggles.
>>32327009
Buy a retaining plate.fuck that shepards hook bullshit.
>>32332474
This, shepherd's hook only really works well with 3 pins, which we obviously don't have. Plate is superior in every way for civilian applications.
>>32332519
Thirded. Get the plate, OP
>Nut in the receiver without it rattling around like a maraca.
This whole thread is bullshit and op is a liar.