QTDDOT

slickguns.com

>>32020689
do your own work you lazy spic

>>32020689
I'm on my phone so I don't have the images showing it, but they're price-gouging assholes. Even right before this election they were inflating prices on everything.

Fuck them, never buy from them. I feel ashamed I bought the stocks for my ars from them before I knew what they did.

>>32020689
If you like opportunist price gougers, then CTD is your place to buy.

And price gouging is one thing. These assholes cancelled existing orders then raised the prices.

File: 1479184316010.jpg (28KB, 466x404px) Image search: [Google]

28KB, 466x404px

>>32020689
I am on the fence about buying some fiochi 9mm at 229$ for 1000 and free shipping.
Might pull the trigger on it... I need 9mm, 5.56, and 308 real bad boys.
There is a reloading company close to me called american security brass. They ship and do custom order match reloads and bulk second used brass reloads as well. It's 200$ for 1000 9mm, 380 for 75g 5.56, and 500 for 115g 308.
Is this a good deal? The 5.56 rounds I bought in the past never failed must have shot 2000 of them

>>32020828
If you want to turn your gun into a pipe bomb why not just build a pipe bomb then duct tape it to the side of your gun and set it off. Why go through a middle man you fucking nigger.

I don't trust them, the prices on used guns are higher than new ones half the time and the accessories are way too expensive. If I want ammo I go somewhere else. I've seen the same crap on slickguns and grabagun too so there aren't many of those sites I trust.

>>32020798
What about Cabela's? currently they have an insane good price on a gun I want.

>>32020947
CTD and Gander are the two companies most /k/ommandos hate. Gander refused to offer any Assault firearms in the wake of SandyHook.

>>32020947
Cabela's is awesome. Call their customer service line. A person will answer the phone and say "Thanks for calling Cabela's, how can I help you?"

I bulk by ammo when they do $5 shipping on orders over $100.

Gander and Bass Pro have some of the worst retail prices.

File: ImadeThis.png (157KB, 436x1380px) Image search: [Google]

157KB, 436x1380px

If I order a barrel from Palmetto does it arrive at my door ? Or do I need to go to a LGS/FFL?

File: Screenshot_20161116-181435.png (302KB, 1440x2560px) Image search: [Google]

302KB, 1440x2560px

Pro tip: go to gun broker, sort by price HIGH TO LOW then go to the last page and scroll upwards. This puts you out of the promoted section and you'll get cheaper guns this way.

>Pic related

>>32021814
Barrels ship to your door, only complete lowers (not 80%) need an FFL transfer.

>>32021889

Thanks boss

>>32021853
Isnt that like a $1000 shotgun?

Why do sks's seem to work like shit with a detacble magazine, while some people have nothing but a grand ole time with no issues?

>>32022020
You can get expensive options to put it up there especially if your LGS shafts you, but they start at $450 MSRP.

SCCY any good?

Good places for ammo?

>>32023851
www.Ammoseek.com

>>32022417
Poorly aligned stock fitment and reciever alignment. Slav shit always has an eyeball it level of quality control.

Friend of mine has an Ortgies pistol from back in the beginning of the 1900s, it's his only home protection and he planned to test it out on the range with modern .32s. is there any risk of modern rounds being too powerful for the gun to handle, newer powders and all that?

>>32020689
CTD is the virtual version of that fudd gun shop owner that overprices everything and molests prices during panic buying periods. I wouldn't give them any money because they're fucking assholes, but if they happen to have a particular thing you're looking for cheaper than every other website (doubtful), then buy from them if you don't have the same moral reservations that I do.

Why does the Navy put tail art on their fighters, but the Air Force generally doesn't?

>>32023690

They're alright if you can get it used for $200. They have a lifetime warranty that stays with the pistol. The trigger socks but just practice and it's adequate at self defense ranges. Beats a hi point for concealability. Or save another hundred bucks and get a shield.

>>32020767
This is the exact truth. I want this on the record.

>>32020689
Qtddtot- 8mm Berthier experience? Lgs has sportorized remington berthier, finger banging her piqued my interest.

>>32020689
Cheaper than dirt price gouged the community hard last scare and pulled "assualt rifles" off the shelve for the feels after a school shooting.
Fuck them

>>32020982
I just dont like that they are like the only anmo site that charges tax, changes the whole math on price per round

Eotech EXPS2-0 or nah?

>>32020689
no and no.

Has anyone tried the galil ACE in 7.62x51 or know someone who has, and if so, how well does it handle and how was the MOA?

>>32020689
I think its 4 times now they've gouged

They upped their prices just before the election

>>32020982
>Cabela's is awesome. Call their customer service line. A person will answer the phone and say "Thanks for calling Cabela's, how can I help you?"
Autism

>>32020969
Which is funny, because the Gander Mountain down in Toledo has a shitload of both new and old stock AR-15's and a few Century AK's. Staff is pretty decent there, and I've gotten some pretty great milsurp deals in the past. I'm guessing it's just a fluke, because all the other ones around here suck ass.

>>32023964
If anything, the old European ammo it was designed for will be hotter than modern .32ACP.

>>32024890
if you like eotechs, thats one of the best models IMO. otherwise, naw.

They price gouge and are economic opportunists. A large amount of their accessories are Chinese knock offs of the real thing. You must be very careful on which wharehouse your items are located in, you may end up with multiple sites. Which they will gladly charge you multiple shipping charges.

File: I5BAaAR.jpg (1MB, 2988x5312px) Image search: [Google]

1MB, 2988x5312px

Alright so i bought a compound bow the other day and the draw weight is too high for me. My question is should i keep it and grow into it or should i trade it in and get one with a lower draw weight. Pic unrelated.

>>32024728
They require an enblock clip to shot more than one round at a time. There are also two sizes, 3 & 5 round.

8mm level doesn't use the same nominal bullet diameter as the standard 8mm so reloading is a pain.

Prvi does make 8mm lebel but it is not all that common to find right now. Expect to also pay a premium for loaded ammo (even prvi).

I wouldn't jump at more than $200 on a nicely done sporter. Try to get the price closer to $150.

>>32025455
Are you sure? I've never noticed that. I'm usually particular about that too. I thought CA was only state that did that.>>32025477

>>32025633
why not adjust the draw weight on your current bow? seems like that'd be easier and cheaper than trading bows

>>32025909
The guy said it goes from 60lbs to 70lbs

>>32025981
you should be able to adjust it much lower than 60#, take it to a store that does archery shit and they should be able to do it for a fee if you can't

File: IMG_0073.jpg (97KB, 640x852px) Image search: [Google]

97KB, 640x852px

How fucked is this sks? 1/3

>>32026044
>SKS

It was fucked the second they started up the press

File: 1468172104498.png (185KB, 422x289px) Image search: [Google]

185KB, 422x289px

>>32020689

Is a pistol caliber carbine viable for HD, or are PCCs just rangetoys?

File: IMG_0061.jpg (1000KB, 3264x2448px) Image search: [Google]

1000KB, 3264x2448px

2/3

Many people here, and everyone I know in person, refuses to buy from them because they are shady-jew price gougers of the worst kind.

After Sandy Hook, they CANCELLED orders of plain STANAGs that were already in processing so they could sell them for over $100 a pop.

File: IMG_0459.png (1MB, 640x1136px) Image search: [Google]

1MB, 640x1136px

>>32026070
Figured. This gap between the tube and the port drives me up a wall.

>>32026078
You probably don't need a full-size round for HD.

Plenty of people use a 9 for HD...

Being able to shoulder your pistol is basically the argument for them and that comes down solely to preference.

>>32026078
pretty much any caliber that's viable as a HD pistol is viable as a carbine

>>32026088
did anyone inform the BBB? that seems like an awful business practice to cancel orders that were processed/processing

>>32020689
They suck balls and if you buy from them YOU suck balls. They are price gouging dbags that have been boycotted into closing some stores due to price gouging and general douchebaggery.

Is Kahr a good company for CCW? I heard a lot of good things from them but lately /k/ seems to hate them.

I'd like to bring a handgun with me when camping. The problem is that I only have a cz75 and rem 1858, neither of which are optimal for what I might actually need it for. Which would be the better option? If the cz is better, what type of ammo should I use? I also have a conversion cylinder for the 1858, so it'd be shooting a 250gr flat nose at 750fps instead of a 140gr ball at 950 fps if that would be better.

>>32026218
Yes, Kahr is solid once you break them in w/200 rounds.
Cheaper than dirt is a terrible company, wanting $4000 for an $800 AR15 in 2013 and $100 for a basic GI mag. Screw them

>>32020689
most still hate them for post sandy hook price gouging but they occasionally have amazing deals like those 2k rounds of brass .303 brit i bought for 25cpr.

>>32026262
They're a terrible company, grow a pair of balls and buy from someone reputable. CHEAPERTHANDIRTBAGS!!

>>32026276
>literally spend an extra $1000 for the same product because they hurt some peoples feelings a few years ago
no.

Whats the difference between the Remington 700 ADL Varmint and the 700 SPS Varmint, looking at the ADL Varmint on Cabela's and it says it has a SPS Varmint stock so idk

>>32026234
Thanks. I've been eyeing the CW45.

>>32026299
If you can't beat their prices by looking online then you're doing it wrong, or they are selling an inferior product.

>>32020689
Cheaper than dirt can go fuck themselves. They really fucked us after Sandy hook. Never forgive never forget.

>>32026388
>beating 25cpr .303
even steel case is 50cpr

> or they are selling an inferior product.
its brass case hxp surplus. literally some of the best .303 ever mass poduced

File: 20161117_140419.jpg (2MB, 2880x2160px) Image search: [Google]

2MB, 2880x2160px

Was mucking around tidying up under the house and I found these. Are they worth remotely anything? True to label..

>>32026443

Your a fucking faggot.

>>32026431
If you support them you are literally a douche nozzle.

>>32026356
halp?

>>32026621
i think youre looking for reddit, faggot.

So i'm looking for a 9mm Single stack, striker fired sub compact with no external safety and an all metal construction. But i'm having trouble finding something that fits that criteria halp.

>>32026443
Top kek, most I'd ever EVER pay for an l1a1 mag is $20, and even that's pushing it.

Packed in factory grease. Top kek. Good troll.

>>32026697
I don't know of a single non-polymer framed, striker fired handgun off the top of my head.

>>32026881
Not a troll, left here by previous owner of the house. Not a gun person so was curious. Cheers for not being an asshole about it

File: unnamed.jpg (111KB, 842x474px) Image search: [Google]

111KB, 842x474px

So im looking to buy this makarov, but what are these weird markings next to the 10? And is 350 a good price for a mak+200 rounds?

>>32026881
>>32026949


Same fag.

>>32026960

wE SHOULD HAVE A WORD FILTER THAT CHANGES mAKAROV TO mACARONI

>>32025719
Thanks mate. About what I figured, it's pretty, nice trigger, but a high maintenance bitch to feed. Appreciate the reloading heads up too.

File: 1477606204602.jpg (47KB, 604x323px) Image search: [Google]

47KB, 604x323px

>>32027042

We should have posters who understand how caps lock works.

File: JEB.jpg (79KB, 790x602px) Image search: [Google]

79KB, 790x602px

>>32020689
Cant Decide Between the 3 different kinds of surplus guns my local shot just got in

>S&W 59 or 5906
>CZ 75 pre Bs
>FEG Hi Power

All for about $300

Which should I jump on?
http://www.strawpoll.me/11670506

>>32020689
CTD suuucks. If you manage to find a good "deal" on something they'le fuck you on shipping. No shit like $30 shipping for a pistol grip.

File: nagant-32acp-2.jpg (318KB, 1000x722px) Image search: [Google]

318KB, 1000x722px

Is $270 a good price to pay for a 1932 Nagant Revolver?

File: way4.jpg (150KB, 1111x405px) Image search: [Google]

150KB, 1111x405px

>>32020689
Asked in the last thread, but can anyone tell me the shotgun pouch used in Way of The Gun?

>>32026228
Why isn't the cz75 good? I wouldn't trust a cap and ball with my life unless I really had to. Weather can fuck with them too much and there's all kinds of other issues they have automatics don't. Are you looking of something concealable or something for bear protection?

>>32027169
the Pre Bs shoot great, FEGs are common as fuck but still good, and the 59s are fairly rare if they're in good shape.

Up to you, for that price its a hard choice

What is the best place to buy guns/ammo online in Germany?

I only know of http://www.frankonia.de/

>>32020689
Fuck cheaper than dirt.
After Sandy hook they canceled everyones placed orders so they could resell the product at jacked up prices.

>>32025510

Hmm, the thing is built sturdy as hell, I guess I will take it to the range myself and test it. That way I'll be the one who gets maimed if something happens.

Thank you very much for the advice

>>32028595
https://www.vdb-waffen.de/de/waffenmarkt/alle.html?s_t=&s_hk=&s_k=&s_z=&s_p=&s_d=&o=neu&v=
Frankonia is only good for deals and used guns...and If you are poor and still want a high-tier gun. They let you finance shit ther.

So i am looking to join the military around the start of summer and i was wondering how important would prior ownership and shooting of a rifle is.

Does anyone have that joke picture with the bullet calibres.

Its something like 9mm, 308 then Mosin Nagant..

And the Mosin Nagant is basically kill everything.

>>32027252
fuck yeah it is, dude. I wish I could find a nagant revolver for 270 :(

File: IMG_3761.jpg (357KB, 1355x2048px) Image search: [Google]

357KB, 1355x2048px

What gun is this?

>>32020689
>is Cheaperthandirt.com a reliable place to buy a firearm from
Yes, they're just another store.
>priced good?
You can't expect an answer if you aren't specific. Depends what you're buying, do you own price research into whatever you are buying.

>>32023913
And people never learn/want to learn this.

>>32020689
Cheaper than Dirt needs to fucking die. Those fuckers gouged people during Sandy Hook. Never buying a damn thing from them.

>>32024089
Because muh culture.

Is this ammo good? It's a lot cheaper than other jhp rounds I've seen.
https://www.midwayusa.com/product/936314/fiocchi-shooting-dynamics-ammunition-9mm-luger-124-grain-jacketed-hollow-point-box-of-50

>>32026228
I carry Glock 20 and a rifle when innawoods up here in the north, but then again we got monthly bears.

My old buddy who now lives in a southern state carries also a 10mm pistol because they have weekly big and nasty hogs there.

During these last 10 years I have never fired my pistol at a bear, and my buddy has shot one hog with his pistol.

Anyway, with a thick animal with thick skin and fur, you need penetration. With a bear, the bullet needs to sink about two times deeper than with a human. 9mm energy levels can do that certainly, just check out what there is for you.

>>32020871
This rant doesn't even make sense.

>>32029474
I would say a personalized/modified HK416 or other AR variant with an integrated upper receiver, maybe some other guy on here is more tuned in on the specific differences in the weapons, but it's definitely an AR platform

/r/ing the screenshot of CTD selling US GI M16 magazines for $80 after sandy vagina

>>32025981

You can't at least pull back a 60 lb bow? Why don't you get fit?

>>32030482
actually I completely rescind that, it's definitely a SIG SG 516, since that's (along with the M4) is what the Mexican Navy has, it just confuses me with that shit mounted to the handguard.

>>32026228

Either the CZ with 124 gr FMJ loaded pretty stout or the 1858 with a good cowboy load. Either one is gonna send a bear chucking and fucking.

>>32027524
I like my cz a lot, and this would just be for a general "what if". I'd much rather use bear spray if I was able.
>>32030467
I've heard that heavy, slow moving projectiles would do better, and that jhp rounds would be a bad idea for 9mm against a bear. Do they make some kind of 9mm flat nose or something? Or would 124gr fmj be best like >>32030542 said?

>>32029198

Mosin Nagant isn't a caliber.

>>32030573

With the 9mm, go with the 124 gr FMJ because black bears aren't THAT big, but you can use a little help getting deep enough to make it work. At any rate, always use solids when fighting dangerous game with a handgun.

>>32030633
Thanks. Just out of curiosity, is there any real difference between 115gr and 124gr? I've noticed that 124gr shoots just a little bit higher and the advertised velocities are slightly different. Why would they make 2 different bullet weights?

>>32030573
>jhp
Jacketed hollow points are designed against unprotected human threat, that is, a couple of layers of clothing and then flesh and blood. From there, it is designed to open up and mushroom in the tissue quite soon after penetration. It (sort of) means that JHP may cause a wound that is maybe too shallow for a thick animal, to cause that excessive bleeding that stop smaller targets.

Of course you may hit it in the brain, in the brainstem or in the heart between the ribs, but this leads to "shot placement" and I don't want to join that discussion.

But, FMJ, copper boolits, hardcasts, and so on.

>>32030525
Doesn't look like a SIG to me. I think it is an HK.

>>32025455
>Doesn't know what autism is
Turner Syndrome

Do you guys know of any places where I could have a custom K31 stock made to be the exact shape as the original milsurp stock? I want one made of dogwood.

File: 20161117_140312.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

Recently noticed some burring on this part of my receiver that I dont know what to call. I gently filed it down but you can see where it is also slanted on the right. Any idea what usually causes this? Only noticed after last range trip. Things I did before I started noticing this was installing an ultimak rail, using croation mags with bolt hold open, and testing out holding the magazine while shooting. I have a feel the problem is a combonation of the latter 2. Any ideas? Thanks

File: 20161117_140713.jpg (1MB, 3264x1836px) Image search: [Google]

1MB, 3264x1836px

>>32030842
Phone posting so pictures may end up skewed.

>>32030748
yeah I might be inclined to agree and that's what I thought in the beginning too but I looked up the Mexican Navy's arsenal and they just don't have them in the marines, but it's mexico so who knows, maybe it just ended up in their hands somehow. It's definitely not a standard M4 though, since the upper receiver and the handguard are integrated

>>32030657

There's more than two bullet weights. Most every caliber has between 2-8.

Heavier, faster bullet = more penetration for a round-nose, and less wound-tract deviation.

So go with the 124 gr.

File: 1478643908620.jpg (48KB, 380x591px) Image search: [Google]

48KB, 380x591px

>>32020689
Are the Heritage Rough Riders decent? I've heard mixed things about them. Kind of a poorfag, but want a .22LR handgun. Also looking at the Beretta Neos.

>>32031612

Leave the Beretta, take the Heritage.

>>32023690
Everything except the trigger is great, but there's no way to fix it, as it it's DAO

>>32031612
I have shot a couple of magazines through U22, and...it's not bad, but it's a bit weird though. Stock trigger was not bad to me.

But what I think where the most weird part of it was, it has this nice custom feeling, but a custom made for someone else than me. It's owner felt kinda same about it. I believe he is going to sell it.

It's just me talking, but I were you, I'd most likely would let the Neos brew for a while just to see where it develops to.

>>32024776
Its probably because there is a Cabelas in your state and by law they have to.

File: VZ70.jpg (99KB, 400x300px) Image search: [Google]

99KB, 400x300px

Anyone have any experience with CZ/VZ 70s?

I just grabbed one of the surplus guns off bud's for 180 bones.

People recommend a Ruger American or Savage 110 for poorfags but how the fuck are you supposed to use those without a scope? A scope alone costs like $80-$100 and considering I'm trying to get a rifle for less than $250, preferably less than $200 that sort of ruins everything.

>>32027489
imfd

File: 1472607630535.jpg (86KB, 354x298px) Image search: [Google]

86KB, 354x298px

>>32020689
>have buddy that seems to think of Cheaper than Dirt as his default purchase store for gun stuff
>actually believes the memes about Trump being a rampant racist and sexist
>voted Hilary
>bought a PTR, but plans on scoping it before even shooting it...also added a vertical fore grip to said PTR

Should I euthanize him now or later?

File: frontend 2016-11-17 20-25-29-45.jpg (129KB, 1288x776px) Image search: [Google]

129KB, 1288x776px

Taking advantage of this thread
Anyone knows if this weapon is real or just made up for the game?

>>32033940
now works

>>32034414
what game?

>>32034451
Tiger Knight
These are some weird glass balls attached to the end of a rag

>>32034444
Quads confirm.

He's also a fat prepper, which just makes it worse.

>>32033856
>imfd
I've looked there, tells the type of shotgun but not the pouch. Was hoping someone might know the shell pouch brand/type

How to take apart a gun without parts flying away into oblivion?

Just purchased my first gun. Was all proud of no longer being a faggot nogunz. I got it used and it wasn't in great shape, so I got a cleaning kit and cleaned it, using the guidance of the all knowing Youtube. I moved something, there was a "ping", and a spring and the part that catches the firing pin when you cock it--"sear"?--just fucking vanished. Tore apart my whole kitchen, parts are nowhere to be found.

I haven't even gotten to shoot my new gun yet. Replacement parts will take a couple of weeks to get here

>>32035825
disassemble in a large ziplock bag or dont take it apart at all if you are a clueless fuckwit

>>32035825
>How to take apart a gun without parts flying away
by having something fly away and having to buy a replacement part. im willing to bet youll be careful as fuck next time. but seriously, just being aware and careful is what you can do next time.
what gun and also congrats on being hasguns

>>32035854
I was going to say clear trash bag... same thing.

This is what I do when disassembling the safety on a Beretta 92 . Fucking detent ball jumps out.

>>32035854
You have to start as a clueless fuckwit at some point

>>32035870
Thanks, and I will.

and... I kind of don't want to tell you, it's embarassing...

Okay. It's a Jennings. T380-ca. Got it for $125 used. The selection of used guns is really bad around here, and I didn't want a hipoint because they're too bulky to cc, so I think it was my best option.

File: 1416981689550.png (18KB, 209x219px) Image search: [Google]

18KB, 209x219px

I want a light I can use on a pistol and AR that lasts long, please.

File: 11813005_977818722260347_1204046607_n.gif (3MB, 704x304px) Image search: [Google]

3MB, 704x304px

i've made hundreds of dollars drop shipping from cheaper than dirt. they make me some good money they're good to go. ALL THE HATERS HERE DONT KNOW HOW TO MAKE MONEY SUCK IT NIGGAS

File: tumblr_myey512OWJ1rswnafo1_250.gif (734KB, 245x145px) Image search: [Google]

734KB, 245x145px

>>32030363
stupid nigger doesn't know how basic economics works. do they even teach supply vs demand in school anymore?

>>32020689
/k/ I think I just did a goof

found an old bottle of potassium permagnate lying around
no idea what it was for, so I googled it

apparently it's a crystal antispetic, used commonly for foot fungus

also you can start fires with it if you mix it with glycerine

naturally I could not pass up the opportunity to test something like that out

so I mix it with some water based lube which is basically glycerine and vegetable gum and a sterilizing agent

did not work, mild disappoint
even tried heating the mixture up, no dice

now I have this tar like mix that may/may not violently spontaneously combust and I don't know how to get rid of it

also any idea why it didn't work?

>>32020689
no, they are fucking garbage with shady business practices. avoid those fuckers at all costs. a simple google search will confirm their shit reputation on all gun forums


i refuse to do business with them

>>32027252
i dunno, i am still biased because i got mine for 60 bucks back in '05. i guess they are worth that if you are drawn to them for the historical aspect...$300 will get you a j frame s&w if you want a good revolver

unless you are really wanting to collect russian guns, i might put the $300 into some other undervalued guns currently like the bulgarian makarov or jap arisaka. maybe a finn mosin? ah what the hell just get the hand nugget, the ammo is still fairly cheap

>>32037166
lol, it takes a while sometimes for the reaction, if you leave it lying out you might wake up to a fire in the middle of the night. just flush it down the drain

whats the temperature in your house? the reaction needs a somewhat warm temperature to work, you need to be warmer than 70 degrees. thats like the minimum temperature and its iffy even there. try it again in a warmer place

Is the AK or the AR a better gun for a newfag? Should I get a bolt action first?

Long term the ak will be cheaper if ammunition prices stay somewhat the same, and that's really what I'm looking at.

File: ptr.jpg (13KB, 259x194px) Image search: [Google]

13KB, 259x194px

>>32020689
how hard would it be to make my own wood ptr stock? i have a chance to buy a ptr with original wood for $1,200, but no rail system. im a freshman in college but fuck it, I love ptr's man

>>32033760

A good scope runs you more than that.

Buy a used hunting rifle with irons, then slap a Redfield on it at a later date.

>>32035946

Any gun is better than no gun.

>>32037166

Bury it underground, where it will be surrounded by dirt and not exceed volatile temperatures.

>>32037495

Have you ever woodworked before?

I used to do it professionally and recreationally, can actually help.

>>32037730
yeah, i make knife handles when i blacksmithed throughout high school. should i just wait and buy one from the factory, and they get some sexy wood and use the old stock as a template?

This is purely for academic reasons.

Is there any law that prohibits the conversion of a Semi-Automatic blank firing pistol to a readily firing and rifled barrel state?

I understand that more than a little engineering is necessary to make it work. I'm just questioning if there is any law against it in regards to either its import status or further serialization.

>>32037759

Well, provided that you're not retarded and can get all of the pieces that need to fit to fit, what can go wrong? That's 90% of the battle, right there. But we used to dick around and make stocks at the shop when there was nothing to do or after-hours. Made an SBS stock and a Tommy-Gun stock.

>>32037804

You can legally manufacture your own firearms, but they may not leave your property.

>>32036513
Cancelling processed orders to sell said product at a higher price is a shitty thing to do.

>>32037818
I understand that part.

My question is would 1968 import laws or 922r then apply as the entirety of the weapon is now foreign built other than the barrel.

Other thoughts, since it wasn't imported as a weapon and the law does not allow its importation if it is readily capable of being converted to expel projectiles, does that make it on its face contraband?

>>32037818
Citations please? Genuinely asking, as far as I knew you can manufacture a firearm without an FFL as long as you never transfer it.

>>32037910
He meant it must remain your personal property.

My whole reason for asking is that you can buy a .380 barrel blank of 20 inches for 20 bucks and shitty Ekol Volga pistols for 40 a piece and it would be fun to tinker with them to make guns I can keep in places where a normal gun would be too expensive (inside the toilet bowl, salad crisper, under the house crawl space).

>>32037337
I'm aware of the potential delay time
if I was twice the retard that I am I might have put it in the bin and started a awful fire

I even tried lighting a fire under the mix to burn it out (because the permagnate should burn by itself)

If an aussie shitposter wants to become a gun owner what are some 'genuine reasons' for owning 2 of the same caliber or getting cat b / c licenses.

Anyone got the results from the Klass of 2016 from Wyo/Vi/k/ing? I have yet to see any results from that and its been over 2 months since then.

if I want to move to a different state what all do I need to do with muh guns? I would assume long guns should be fine but pistols may be different
if it matters I'm a WA resident and I won't be moving to any place like NY or CA

File: Cheaper-Than-Dirt-AR15-GI-Magazine-Ripoff.jpg (49KB, 848x456px) Image search: [Google]

49KB, 848x456px

>no one posting the pics of cheaper than shit

File: Springfield-Armory-Saint-10.jpg (362KB, 1170x610px) Image search: [Google]

362KB, 1170x610px

ive got a question (maybe the AR general thread would be better for) what are your thoughts on the springfield armory "saint" 5.56? pic related

Anyone familiar with the history of war dogs? I heard Greeks, Romans and Celts used war dogs. Romans even armored theirs. How effective would such type of dogs(think big mastiff breeds) actually be in warfare? Could you use them in formation and use them to break other people's formations? How would you control them in the battle? How would you keep them from attacking your own soldiers?

I'd like to buy a Mosin because I heard good things about it from you guys. I currently don't own any guns. How much should I be paying, and where do I get the ammunition?

>>32038591
>99 shekels for milsurp I can find up the street for 12 bucks a piece
Just stretch my asshole

>>32039170
You shouldn't have to pay over 220 for a good one. Ammo can be at many pawnshops or gun shops in your area. Check auction sites, estate sales, armslist for good deals.

>>32039434
Thank you. Cabela's has a listing for a 91/30 for $250, and to me this seemed cheap for a rifle but I don't know a whole lot about Mosins in general.

>>32020767
Except on g3 mags

>>32024089
Bombers still do nose art bit it's not like naked ladies anymore. Also they paint a10s like sharks still sometimes

>>32034414
https://en.wikipedia.org/wiki/Hammer_throw
sorta, not really

>>32025633
That filename should be
>When you take fallout 4 serious

>>32020767
/thread

>>32039511
Yeahhhh, no. Just break out $300 and buy an infinitely better rifle. The mosin was cost effective "good" when it was sub $150. Now it's not.

File: snap-caps-courtesy-brownells.com_1.jpg (62KB, 500x217px) Image search: [Google]

62KB, 500x217px

Anyone have, or know where I can find, an assortment of snap caps for a good price?

I want all the major handgun calibers + .32acp, but I don't need 5 of each. And I definitely don't need to spend 15-20 dollars per caliber like with pic related.

I can justify buying a set of 6 caps in a revolver caliber for dry fire practice, but for automatics I only need one really.

>>32040684
Ebay, your next gun show, the internet.

>>32040684
aluminum ones don't really hold up that well if your gun is hard on them. aluminum snap cap through an AK will tear the shit out of it.

>>32036513
Marissa Tomei in My Cousin Vinny was so fucking hot, gotdamn

>>32030474
I will fuck you to death with a tractor

File: DSC_0326.jpg (1MB, 3920x1640px) Image search: [Google]

1MB, 3920x1640px

Quick question, I'm going hunting for the first time soon. I've shot my rifle maybe 50 times at the range and I'm more than comfortable with it and my groupings are on point. Now I was told by an instructor that you're supposed to keep looking through the scope after you take your shot, which I do. However due to the recoil the scope naturally moves a whole lot and when I take a shot it's always off the target afterwards (at a 100 meters or so). It takes me about a second or two to readjust and get back on target. Is this fine or am I doing something wrong? As far as I can tell everything I do is correct, my breathing, stance, rifle support, etc.

>Pic related my Yugo raifu

dumb question, to seperate an AR-15 upper and lower, does the bolt need to be locked into battery or does it need to be locked back?

>>32038591

>Our Low Price

>>32040848
Bolt needs to be closed if you take it apart, otherwise the rear of the bolt keeps the rifle from pulling apart.


Can a display gun be converted back into working order? Assuming you convert it to semiauto only.

>>32040811

You'll have to re-adjust to get back on target after a shot from some positions.

I'm a big hunter and I practice for it by going out to the longest fields and valleys near me and taking my shots there. What I've found is that when taking a shot sitting or prone supported, if you'll do a lazy C-clamp you'll get back on target.

The important thing is chambering again and observing because if you're in a 600x300 yard open space and you bounce one through the animal and get a chance to shoot again, do it. Ammo is cheap, following an animal in awful terrain eats dicks.

You'll be fine. It happens so fast and you're so focused on making the kill that you'll go on auto-pilot and surprise yourself.

>>32040992

You mean like the floor models in big outdoors stores?

>>32040811
It just means to hold on target long enough for the bullet to exit the barrel.
Easiest way to achieve this is hold the sight on target "overtime".
T. Fdf sniper

>>32041021
More like this:
http://www.ima-usa.com/german-german-wwii-mg-34-display-machine-gun-marked-dot-1952.html

File: 15135467_110837956067067_662000399_n.jpg (55KB, 552x360px) Image search: [Google]

55KB, 552x360px

what gun pls halp

>>32041039
>>32041000
>Ammo is cheap
Not in yurop, a 30-06 costs me about 3usd here.

Other than that thanks for the tips fellas

>>32041354
Yugo mauser

>>32026356
ADL is the ghetto version of the SPS. Internal box magazine without a hinge plate in the bottom.

>>32027489
looks like just a regular dump pouch

>>32027489
Honestly it looks like a no-name toolkit pouch. They didn't have as many dedicated tacticool options back then.

>>32020715
>Lazy
>Spic
Pick one

>>32041393

Why the hell are you using a round foreign and exotic to your AO if it's so expensive?

>>32031612
I like mine. Reloading it is a royal bitch, but hey, I got what I paid for.

>>32041961
All rounds are expensive here. A 9mm costs me 50 cents. And both these rounds are used abundantly here

File: 1472575041352.jpg (46KB, 500x594px) Image search: [Google]

46KB, 500x594px

>>32042055
>9mm costs me 50 cents

>>32035136

Kill him before he stockpiles enough cheetos to survive your assassination attempt.

>>32020689
They have terrible ammunition prices, I bought a 22 lr rifle from them at a good price though.

>>32041061
>Comprised of nearly entirely original WWII parts, this weapon has been rebuilt on an original WW2 re-welded de-milled receiver without internal parts that has been replaced with solid steel bar-stock.

Sounds like they removed all the useful bits and blocked up the inside of the receiver, so probably not

Something like
>http://forums.gunboards.com/showthread.php?641001-WTT-MG-34-parts-kit-on-Dummy-receiver-or-FN-30-complete-semi-kit-4-AUG-A3-OR-Scar-17

you'd probably be able to

>>32042069
Croatia m8, its 30 cents for shit tier 9mm, 50+ for something decent

>>32020689
CTD is on indefinite boycott from all red blooded gun lovers. The shit they pulled during the gun control scares was unforgivable. Cancelling orders to raise prices, selling 5.56 for $5/round, etc. Fuck them. I will never buy from them as long as I live.

>>32026960
The marks appear to be striking out the mark of the previous owner. I have the same thing on a former police P1 where their mark is X'ed out to show they don't own it anymore.

>>32027042
:^)

File: 1478407897855.jpg (5KB, 250x227px) Image search: [Google]

5KB, 250x227px

>>32042271
>selling 5.56 for $5/round

Holy fuck, did they really do that?

>>32042337
They did. They also had old USGI colt mags for 10$ a pop. Gun control scare happens, they cancel all orders on them and bumped the mag prices up to 99$ a pop. I had 4 mags on order when they did that.

Haven't ordered anything from them ever since.

What is another good website to buy guns from besides gunbrokern that's actually reputable?

>>32042458
Bud's

>>32023851
My favorite is sgammo

>>32042458
Buds, Atlantic firearms for ak pattern or 308 semiautos, classic firearms for milsurp

>>32030444
I hate to "bump" my own question, but does anyone know if it's worth it?

If the NFA stopped existing, do you think gun manufacturers would still sell their semi-automatic civvie weapons or would they just drop it all since everyone will just start buying M4s straight from the source?

File: Hickok report.png (1MB, 1280x720px) Image search: [Google]

1MB, 1280x720px

>>32042458

I've bought like 5 guns from bud's and have had no issues.

Some stuff takes awhile to process and ship, other stuff ships within 24 hours. Shipping is 2nd day air for handguns I think.

The prices are decent (not amazing) and they do get some surplus/police/recent import things pretty often.

Protip: when buying any gun from bud's first click the price match request button and enter some lower (but still logical) price. Then just type in some other gun website as the source of said price. Bud's will often change to their bottom dollar offer and then you can just proceed with the sale.

Seriously, i've saved on several guns doing this. I saved $60 on a NIB G29 by quoting and linking the the USED price from some other website, which didn't even have the guns in stock anymore.

I'm not sure how their price match system works, or if they even check this shit. Every time i've gotten price reductions, it happens instantly, so there doesn't seem to be any human review of the claims made in the price match section.

>>32026078
i have a highpoint carbine 9mm in my collection for a SHTF

i got my AR, and my AK but if i ever run out of ammo i have plenty of 9mm and if i someone needs to be armed but cant handle a lot of kick it will be theirs.

9mm carbine, red dot, make anyone into a defender.

>>32042635
Until the thing jams and you inevitably have to take the piece of shit apart, which is probably the worst aspect of any Hi-Point: trying to take their literal pot metal guns apart.

>>32041656
Both mandatory

>>32020947
>>32020982

Cabellas is only good for ammo. If you actually found a real life good deal on a gun there, buy it before the fudds who work the gun counter mark it up 30% above retail. Cabellas is one of the worst places to buy guns usually but is generally G2G for ammo.

File: IMAG0323.jpg (760KB, 1300x827px) Image search: [Google]

760KB, 1300x827px

>>32042676

Yeah Cabela's seems to be like $100 more expensive than any online retailer. This applies to new guns always and almost always to their "antique" stuff.

I got one decent deal in there, which was $450 for a used-but-NIB-condition sig P320. But even then, I only bought it because they were giving 10% everything in the gun library.

>>32020689
Oh god no, spend your money elsewhere

>>32042727
>that bore axis compared to the glock

>>32042633
Thanks for the tips! I really want an enfield, no 4 mk 1. I see all these people saying how they found theirs for $350 or less, but i just can't find any Enfield's for that cheap. Where do they find guns so cheap?

File: slow-lol-zoom.gif (4MB, 400x373px) Image search: [Google]

4MB, 400x373px

>>32042778

I'll give you two guesses which gun has more muzzle flip, friendo. :^)

Seriously though, I love my P320. I want to make babies with the trigger.

I love my mini problem solver™ too. XD

>>32042214
Don't you guys have anything left over from Yugoslav Wars? I figured shit would still be floating around. Not the guy you're replying to btw

File: Pmm.webm (136KB, 500x284px) Image search: [Google]

136KB, 500x284px

>>32042838

I would imagine a lot of them are purchased used from the big auction sites.

Could also be from gun shows, or from a friend/acquaintance.

There's also the possibility that many people enjoy lying on the internet, especially when it comes to how much they paid for something.

>>32042838
Condition of the weapon can affect the value greatly, and you see more fluctuations in older guns because they're old and worn out often times.

File: federal officer.png (357KB, 572x804px) Image search: [Google]

357KB, 572x804px

>>32042659
i did learn to eventually,

is it a pain in the ass, yes
do i feel like its going to jam if im ontop of a rainy roof top or drop it in a puddle, no.

will it jam if you do a youtube test of jamming mud inside it, yeah

but as long as its maintained regularly like any gun i wouldnt have a problem if i or anyone in my post apocalyptic neighborhood watch had a highpoint carbine

File: IMG_20161118_165645551.jpg (3MB, 2432x4320px) Image search: [Google]

3MB, 2432x4320px

Next step? Got a good gunbroker auction deal on the wood. Should I get a wood stock or black magpul stock?

File: IMG_20161118_164443551.jpg (3MB, 2432x4320px) Image search: [Google]

3MB, 2432x4320px

>>32042982
Before.

Also, anyone having any problems with Windows 10 NOT retaining file rotations? Shit's really pissing me off...

Where do I get more stickers for my gun case

>>32043019

Buy more guns.

>>32042938
Yeah i knew that, but on gunbroker there are no enfields that are under $500 that arent sporterized. Even the expensive ones look kinda beat up

>>32030808
There is a guy on etsy that makes wood stocks though more of the thumb hole or pistol grip type. I'm sure he'd would take a custom order.

So I just got my hands on a rather nice Yugo Mauser, and I want to know how to polish it up to make it nice and pretty. How do I go about giving the wood/metal a nice cleaning and polishing? From what I've read, I should do a full disassembly, followed by gently cleaning the parts (both metal and wood) with paste wax.

Bought some cheap ass air rifle because I can legally plink with it inside my own backyard.

But the barrel of it is looking like pic related, totally bent, probably due to bad handling during transport, some heavy boxes on it, etc. Not so bad as the drawing, just used it to demonstrate the problem. It was cheap as fuck tho' and groups well as iron sights are not affected by the problem, but to add some scope to it would be a shit as the dovetail and the barrel aren't aligned.

What would be a decent way to unbend it a bit? Thought of some big weights on the straight part and some weights on the barrel middle to tip part and go adding and checking until it is more of less straight. Your opinions?

>>32020689

>FNX
>(((50))) rounds through it
>3 mags
>150 rounds ammo
>some shitty laser/light
>$750

First gun purchase; want .308 AR more but this sounds like a good deal and I want this pistol. Should I buy?

>>32026121
>>32026079
>>32026044
That rifle is fine, just some cosmetics.

>>32021134
>Bass Pro
What? My local bass pro had a sale on a Bersa Thunder for 200 bucks. They even have some Sig and CZ stuff that's about 100-150 bucks below price.

File: situation.png (4KB, 800x600px) Image search: [Google]

4KB, 800x600px

>>32043083
forgot pic

>>32043224

See if you can still zero it with whatever scope you put on there, and if not, then start bending shit.

>>32020689
Is $350 too much for a nagant revolver with .32acp cylinder?

I know a nagant revolver on its own is worth like $150 but I hear those cylinders are pretty rare

File: IMG_6597.jpg (61KB, 640x480px) Image search: [Google]

61KB, 640x480px

Will stripper clips intended for .308 work for 7.5 French?

I'm going to my first gun show tomorrow. what should i look out for, what should i do, tips in general

File: dan wesson bruin.jpg (2MB, 3264x2448px) Image search: [Google]

2MB, 3264x2448px

>>32043584

Look out for a shaggy triple-amputee Vietnam vet in a wheelchair, who wears a sleeveless biker t-shirt and smells like an expired italian sub.

There's always one.

>>32043644
That's actually true.

>>32043584
Gun show virgin experience checklist
-Jerky
-Someone firing a stun gun repeatedly
-$70 .22LR bricks
-$800 SKS
-$100 Anderson lowers
-NRA/local pro gun group table manned by people who make you think gun control may be a good idea

>>32042870
A ton of people here are anti fun, so its hard to obtain firearms in the first place, and all the prices are inflated as fuck. My g19 gen 4 set me back $800ish. Its ridiculous because I want to spend time at the range and practice but its just too pricey to go down and shoot 100 rounds once a week

My grandfather died around 8 years ago and he left behind an SKS in Argentina. Is there anyway to legally transfer it to Argentina or am I fucked?

>>32044041
*legally transfer from Argentina to America

>>32043584
Glomping.

i'm looking for a simple but heavy duty sling for my shotgun, it already has the to pivot things drilled into them, what do you guys recommend? The sling can't be black.

Also, im looking to change the front sight to my mossberg, where can i find some parts like the front sight of the ghost ring sight?

Whats a "decent" cheap pistol?
And I mean cheap as possible while still being reliable.

Just looking to grab 2-3 for some dropbags, so shit like
>comfort
>ammo prices to an extent, only need enough for 2 mags per gun
>magazine cost to an extent
>not looking like aids
>ect...
means nothing to me, I will 99% probably never use them which is why I don't want to burn too much money on them at all.

Literally the only two things I care about
>very cheap
>decently reliable

What are my options?

>>32043710
>NRA/local pro gun group table manned by people who make you think gun control may be a good idea
Always makes me hate myself when I see someone so truly adherent representing gunowners that I think they shouldn't be allowed to own firearms regardless of the bill of rights.
And they should be sterilized.

>>32027252
mfw i bought mine like 5 years ago for 60 bucks...

damn i could get a mosin for like 65 bucks...

>>32044079
hi-point

>>32044170
>reliable
nice one tyrone

>>32036299
pls?

File: Hickok game.jpg (302KB, 522x800px) Image search: [Google]

302KB, 522x800px

>>32044079

Ruger LCP, kel tec P11, surplus euro/slavshit (bud's has CZ 70s w mag for 180, makarovs also exist).

Could also get like 6 or 7 really cheap .22lr revolvers. They would be reliable and if the ammo is shit just go to the next cylinder.

This one costs 124 dollary doos brand newhttps://www.budsgunshop.com/catalog/product_info.php/cPath/2084_21/products_id/87902/Heritage+RR22B4+Rough+Rider+6RD+22LR+4.75%22+Blued

File: 1911.jpg (26KB, 600x400px) Image search: [Google]

26KB, 600x400px

Can anyone tell me if its worth purchasing grip panels made of g10 to replace polymer grips already on a gun? I understand the grip cut itself is important but is the g10 material itself worth using over standard plastic grips?

I have a 1911 that was given to me, but it's got plenty of rust on/in it, but it's functionally fine, no malfunctions in the 50 rounds I put through it to test fire it. I plan on cerakoting it, but I gotta remove the rust first. Would it be effective to completely take it apart and soak it in white vinegar for a few hours? I heard it's good at removing rust, but wanted to make double sure that it's worth my time to do. I don't give a fuck if it's ugly afterwards as it's getting sanded and painted regardless.

>>32020689
CTD are the shitbirds who were charging $100+ for basic bitch 30 rounders after sandy hook. I can not, in good faith, ever recommend them.

I understand that's how capitalism works, but they're still shitbirds.

Someone wants to trade my Walther PPS M1 for a Glock 22.

Is this a good trade?

Budsgunshop.com. best prices I've seen and they price match

>>32031612
I like mine well enough, but that's just me personally. I used it more when i was younger for rabbit hunting, it holds impressively good spread at distance (35-50 yards). If i had to say something bad about it, it feels a little top heavy which can fuck you up but nothing god awful.

File: 1456364369176.gif (4MB, 340x340px) Image search: [Google]

4MB, 340x340px

I have 2 pistols a Glock 19 and a SW Shield 9. I want to buy a rifle and don't want to spend a shitload of money.

Are there any options other than:

>SKS: Over priced for what you get apparently (They're like $550 now?)
>AK: Apparently quality control problems, price tag looks like $700 for a good one in burgerland
>Mini 14: Looks like $600-$800, 223 is gay, apparently they have accuracy problems
>AR: I really don't know if I want one, I don't really feel like getting a M&P sport or a Del-ton. They're what like $675-$800?

Are there any other options? I'd like to spend like $450. Or should I just spend more and get the M&P (I really don't want to for some reason)

>>32045027
>inb4 build

I don't want to

>>32044079
S&W SD9VE

>>32045027
Honestly, if you think the .223 is gay, you probably won't like the 5.56 that much.

The only AK I've handled was my dad's NPAP. The Yugo cheek slap is a bitch but you can either shave that comb down or do the "NTCH" method. It worked well and surprisingly it was accurate.

I'd save up for a decent AK if you can.

>>32044916
Bump

File: IMG_20161118_220341553_HDR.jpg (3MB, 2432x4320px) Image search: [Google]

3MB, 2432x4320px

>>32042982
There we are, I think this works. MUCH better than this >>32042995.

>>32045027
>SKS: Over priced for what you get apparently (They're like $550 now?)
Check out Aim Surplus, they have Yugos for $420 right now. Just ordered one myself. Matching serial number bayonets.

>>32043541
But will the 308 stripper clips work in the firearm chambered in 7.5 French? That is the real question. Answer probably no.

>>32045137

I want a Yugo or Chinese right? Which ones are the shit ones again?

File: 5C_-_SKS.jpg (859KB, 950x4000px) Image search: [Google]

859KB, 950x4000px

>>32045175

File: 1381197089834 - Copy.jpg (1MB, 2560x1920px) Image search: [Google]

1MB, 2560x1920px

>>32043584
>first gun show tomorrow
Don't pick anything up/handle at all. If the guy is a piece of shit, just walk away. 60% of the vendors are shit. Only shit from regular gunshops will have realistic prices. There will also only be 1 or 2 deals. My experience with Saxet Gunshows.

>>32044071
bump
pls respond

>>32043148
If it's what you want go for it

>>32044071
http://m.ebay.com/itm/Mossy-Oak-Pink-Leather-Gun-Sling-w-Swivels-36-Rifle-Shotgun-Heavy-Duty-LADY-/261853375000

Can someone recomend a range in MN/west wisconsin? The one I go to currently costs $20 per trip, and has RO's breathing down your back

Are Rotcho woobies the real deal? What about their ponchos? Where do you guys buy them from?

>>32027042
No, it would Makarov to Dickgrips

I've got an SKS (so original) and I bought a cleaning kit for it. The only thing is that the cleaning rod that came with the rifle doesn't fit any of the attachments. The kit was labeled "SKS" and as far as I know the cleaning rod is original. I use my fathers AK cleaning rod since his bayo lug is cut (post ban sporter) so he doesn't use it. Only problem with that is that his AK has a 16" barrel and my SKS has the usual 20". Even if the kit was made for an AK, the SKS rod should still work with it right? I would think so, but it's not working and my fathers does. What do?

File: Soldierpracticesquickscoping.jpg (346KB, 1280x853px) Image search: [Google]

346KB, 1280x853px

>>32020689
A coworker of mine wants an AR10 in 270 case is too so maybe this dude could have one in 2fuddy3 or .338 Fed. Are the AR-10s in oddball calibers with 24-26" barrels super unreliable?

>>32044916
I should add the Glock has night sights, used but functionally fine, etc.

>>32044916
I'd keep the Walther.

>>32045541
Bumping on woobie source.

>>32045853
used glock 22's are worth roughly 350-400 cause of posurp. most posurp glocks have dead to dying nightsights.
its the cheapest used glock out of the glocks

>>32045975
>>32045897
Thanks. I'll look at it tomorrow and see if it's worth anything.

>>32044741
Just get naval jelly and scrub the fuck out of it. The vinegar sounds like a waste of time tbqh

What website do you guys buy your guns from?

>>32045136
>Scope on carrying handle
Are you the crimson chin?

Found a non-matching K98 last night for 500. Not russian capture, had very faint eagles. I think the code was BCD and 1942, but I can't remember for sure. Did not appear to be a Mitchell's. Is this a good deal?

>>32048705
I think it's a K98, btw. It said Mod. 98 on the receiver.


I don't know a lot about mausers.